16v AC Cased Transformer - All metal cased transformer for powering Panel mounted controllers - Input Power: 230v Mains - OutPut: 2x 16v AC - Output Rating: 1Amp
Black Wire (7 x 0.2mm) 100m This wire can be used for point motors, switches, track wiring and many other applications.
Black Wire (7 x 0.2mm) 10m
Blue Wire (7 x 0.2mm) 10m
Capacitor Discharge Unit This device is for operating electrical point Solenoid motors and accessories - Requires wiring to a 16- 24v AC Supply in order to use. - Suitable for N, OO Gauge and O Gauge accessories
COMBI Single Track Controller with Plug in Transformer
COMBI - Single Track Analogue Controller with Plug in Transformer Ideal for the beginner with a first train set or expanding on a current railway. Includes - Hand held controller - Mains Transformer Technical: - Input: 230v Mains - Controlled Output: 12v DC - Accessory Output: 16v AC - Rating 1.1Amp - Suitable for N, OO, OO9 and (SMALL Dapol Locomotives) O Gauge
Green Wire (7 x 0.2mm) 10m
Grey Wire (7 x 0.2mm) 10m
Orange Wire (7 x 0.2mm) 10m
Pink Wire (7 x 0.2mm) 10m
Point Motor Wire Red/Green/Black Tripled (14 x 0.15) 10m
Point Motor Wire Red/Green/Black Tripled (14 x 0.15) 10m For use with Solenoid Point motors or SEEP Point motors
Precision Lubricator with Needle Applicator (10ml)
Precision Lubricator with Needle Applicator (10ml)
Red Wire (7 x 0.2mm) 10m
Red/Black Twinned Wire (14 x 0.15mm) 10m
Red/Black Twinned Wire - Diameter (14 x 0.15mm) - Total length of cable is 10m - Ideal for track wiring needing two cables at a time.
Ruby Series 2fn Small DCC Decoder 8 Pin
Ruby Series 2fn Small DCC Decoder 8 Pin The DCC92 is a 8 pin decoder with a fitted 45mm harness between the pins and the decoder. An ideal decoder for retrofitting into non DCC Ready locomotives. Features: 2 Digit and 4 Digit Addressing 14, 28 or 128 Speed Steps Smooth Operation Constant Brightness Lighting Direct Mode Programming Motor Isolation Protection Advanced Consisting
Ruby Series 2fn Standard DCC Decoder 21 Pin
Ruby Series 2fn Standard DCC Decoder 21 Pin Includes - 2 Digit and 4 Digit Addressing - 14, 28 or 128 Speed Steps - Smooth Operation - Constant Brightness Lighting - Direct Mode Programming - Motor Isolation Protection - Advanced Consisting - Socket to Add PowerPal - Current Rating 0.5Amps - Motor Rating 1.5 - 2 Amps
Seep Point Motor with Built-In Switch
Seep Point Motor with Built-In Switch - Ideal for electrofrog points to change polarity at the same time as the tiebar - OO and N gauge
Seep Point Motor with Latching Mechanism
Seep Point Motor with Latching Mechanism Seep Point Motors have the advantage of being easy to fix under the baseboard, requiring only a small slot to operate the point. The PM-4 is our best point motor for throwing points that have lost the over centre spring or are a bit heavy to move. It also features a change over switch for changing polarity and LEDs if required. Includes: - 1x GMC-PM4 Solenoid Motor - Instructions for installation and wiring - OO, O Scale
Single Track Walkabout Controller
Single Track Walkabout Controller Designed for those who wish to walk around there layouts or operate from afar - Designed to be wired with a Gaugemaster GM75 Plug and socket for panel mounting - Can be powered via: GMC-M1 Transformer, GMC-T1 Transformer, GMC-WM1 Transformer - Suitable for N,OO and OO9 Gauges
Twin Track Cased Controller Ideal for expanding the train set with the ability to control 2x locomotives independantly and power accessories - All in one controller with power lead wired - Sturdy Metal Casing - Accessory outputs ideal for point motors - Requires connecting to the mains via the socket - Suitable for N, OO and OO9 Gauges
Wall Mounted Transformer 1 x 16v AC or 12v DC @ 0.75 Amps
Wall Mounted Transformer Ideal for smaller Layouts or powering point motors ad acessories Includes - Outputs: 1 x 16v AC and 12v DC - Current Rating: 0.75 Amps - Mains transformer - Suitable for N,OO and OO9 Gauges
White Wire (7 x 0.2mm) 10m
Yellow Wire (7 x 0.2mm) 10m