Curve - 1st Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 30 degree code 80 track piece, with a 267mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Curve - 2nd Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 30 degree code 80 track piece, with a 310mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Curve - 3rd radius (TT) The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 30 degree code 80 track piece, with a 353mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Curve - 4th Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 30 degree code 80 track piece, with a 396mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Curve - 6th Radius - 7 Degree (TT)
Curve - 6th Radius - 7 Degree Extend your model railway layout with this Hornby Curve 6th Radius 7 Degree piece.Ideal for those long-time railway collectors of those just starting out building their layout. - TT:120 Scale
Curve - 6th Radius (TT) (Curve used on Points to equally up)
Curve - 6th Radius (TT) (Curve used on Points to equally up) The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 15 degree code 80 track piece, with a radius of 640mm, is ideal for constructing your layout and is compatible with other code 80 track as well as bringing tracks back to parallel after a point. - TT:120 Scale
DCC Track Turnout Clips (pack of 20) (TT)
DCC Track Turnout Clips (pack of 20) (TT) These clips circumvent the built in isolation in our points, allowing power to always flow which is required for digital running. These clips do also have certain specific uses for analogue running. - TT:120 Scale
Diamond Crossing Left Hand (TT)
Diamond Crossing Left Hand The diamond crossing is a piece of track used when you wish to pass one line through another. This is electrically isolated to prevent shorts and can be used to create complex track work. This code 80 track piece, 166mm long, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Diamond Crossing Right Hand (TT)
Diamond Crossing Right Hand The diamond crossing is a piece of track used when you wish to pass one line through another. This is electrically isolated to prevent shorts and can be used to create complex track work. This code 80 track piece, 166mm long, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Digital Power Connecting Clip (TT)
Digital Power Connecting Clip (TT) An essential part of any digital layout, the digital power connecting clip is an easy way to connect your layout to the output of your digital controller. - TT:120 Scale
Digital Power Connecting Track (TT)
Digital Power Connecting Track (TT) An essential part of any digital layout, the digital power connecting track is an easy way to connect your layout to the output of your digital controller. This code 80 track piece, 166mm long, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Half Curve - 1st Radius The backbone of any model railway, this half-length of curved track will help you create complex refined trackwork in a siding off the main line. This code 80 track piece is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Half Curve - 2nd Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 15 degree code 80 track piece, with a 310mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Half Curve - 3rd Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 15 degree code 80 track piece, with a 353mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Half Curve - 4th Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 15 degree code 80 track piece, with a 396mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Half Straight Track This is a half straight track piece, allowing some more refinement for circuit building and an easier way to fill your space should you not have enough for a full straight. This code 80 track piece, 83mm long, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Hornby TT Fishplates (20) - Suitable for Hornby TT track Fishplates are a required part of any model railway, these are essential not just for the connecting of track lengths but they also play a crucial role in allowing power to pass from each section. This pack of 20 fishplates will allow you to swap out damaged examples and add plates to lengths of track that may have been modified for custom fitment. * THESE CANNOT BE USED WITH PECO TRACK
Isolating Fishplates (12) (TT)
Isolating Fishplates (12) Fishplates are a required part of any model railway. They are essential for the connection of track lengths and play a crucial role in allowing power to pass from each section. For a double loop of track, these isolating fishplates can be fitted so that the locomotive does not pass the points in a certain loop. Use these isolated fishplates for your TT:120 layout. Twelve isolating fishplates are included. - 12 in a pack - TT:120 Scale * THESE CANNOT BE USED WITH PECO TRACK
Left Hand Point 166mm 15° 631mm
Left Hand Point 166mm 15° 631mm Point work is an essential part of any model railway, allowing you to connect circuits or create complex shunting yards. This point is left hand, unsurprisingly this means the track spur comes off on the left of the main line. This code 80 track piece is ideal for constructing your layout and is compatible with other code 80 track. Hornby TT:120 points measure 166mm along the main track, with a 15 degree, 640mm track spur. - TT:120 Scale
Power Connecting Clip An essential part of any layout, the power connecting clip is an easy way to connect your layout to the output of your controller. - TT:120 Scale
Power Connecting Track An essential part of any layout, the power connecting track is an easy way to connect your layout to the output of your controller. This code 80 track piece, measuring 166mm, is ideal for constructing your layout and is compatible with other code 80 track. - TT120 Scale
Quarter Curve - 1st Radius (TT)
Quarter Curve - 1st Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 7.5 degree code 80 track piece, with a 267mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Railer This makes it easy for you to get trains running, ideal for younger modellers or those who find it difficult lining up small track and flanges. This is simply placed over the track, and your stock pushed down it like a ramp lining everything up perfectly. - TT:120 Scale
Right Hand Point 166mm 15° 631mm (TT)
Right Hand Point 166mm 15° 631mm Point work is an essential part of any model railway, allowing you to connect circuits or create complex shunting yards. This point is right hand, unsurprisingly this means the track spur comes off on the right of the main line. This code 80 track piece is ideal for constructing your layout and is compatible with other code 80 track. Hornby TT:120 points measure 166mm along the main track, with a 15 degree, 640mm track spur. - TT:120 Scale
Standard Double Straight - 332mm (TT)
Standard Double Straight - 332mm The backbone of any model railway, this length of straight track will help you create long runs on which your trains can be run and admired. This code 80 track piece, measuring 332mm, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Straight Track - 160mm The backbone of any model railway, this length of straight track will help you create long runs on which your trains can be run and admired. This code 80 track piece, measuring 166mm, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale
Track Pack 1 Easily extend your TT train set with this track extension pack. The packs should be added in order, and doing so will leave you with a large and satisfying layaout allowing you to run trains all day long. This track pack contains code 80 track compatible with individual code 80 track pieces. Includes: 1x TT8008 Left Hand Point 166mm 15° 631mm 1x TT8007 Curve - 6th Radius 15° 640mm 5x TT8002 Straight Track 166mm 1x TT8010 Buffer Stop - TT:120 Scale
Track Pack 2 Easily extend your TT train set with this track extension pack. The packs should be added in order, and doing so will leave you with a large and satisfying layout allowing you to run trains all day long. Includes: - 6 x TT8004, - 1 x TT8007 - 1 x TT8009 - 3 x TT8002 - 1 x TT8010
Track Pack 3 Easily extend your TT train set with this track extension pack. The packs should be added in order, and doing so will leave you with a large and satisfying layout allowing you to run trains all day long. This track pack contains code 80 track compatible with individual code 80 track pieces. Includes: - 6 x TT8004, - 1 x TT8006, - 2 x TT8009
Track Pack 4 Easily extend your TT train set with this track extension pack. The packs should be added in order, and doing so will leave you with a large and satisfying layaout allowing you to run trains all day long. Includes: 2x TT8006 Curve - 4th Radius 30° 396mm 1x TT8007 Curve - 6th Radius 15° 640mm 1x TT8009 Right Hand Point 166mm 15° 631mm 2x TT8002 Straight Track 166mm 1x TT8010 Buffer Stop - TT:120 Scale
Track Pack 5 Easily extend your TT train set with this track extension pack. The packs should be added in order, and doing so will leave you with a large and satisfying layaout allowing you to run trains all day long. Includes: 1x TT8008 Left Hand Point 166mm 15° 631mm 5x TT8003 Curve - 1st Radius 30° 267mm 1x TT8010 Buffer Stop - TT:120 Scale
Track Power Connecting Pins (4) (TT)
Track Power Connecting Pins (4) (TT) This pack of four pins allows for wires from non-Hornby controllers to be easily connected to the Hornby power track and power clip pieces. This enables you to use your favourite controller with your TT layout. - TT:120 Scale
Uncoupling Ramp (TT) The uncoupler ramp allows you to disconnect your rolling stock and locomotives without having to remove them from the rails. This simply connects to existing unballasted track and can then be operated by hand or with a Hornby point motor. - TT:120 Scale
Y Point To create parallel tracks from TT8043 'Y' point use two TT8049 section curves.Hornby points are supplied for operation by hand. They may be converted to remote control electric operation by using a 'point motor'. - TT:120 Scale