1 Plank 'Lowfit' Wagon BR Bauxite (Late) 'B450161'

1 Plank 'Lowfit' Wagon BR Bauxite (Late) 'B450161' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, flat bed wagons with a single plank along each edge which was hinged and so could be lowered to allow cargo to be rolled on and off. Such wagons were employed to move things like tractors, motor cars and other relatively small machinery that was happy being exposed to the elements during the journey. Anchor points were provided on the wagon floor so that loads could be tied down, and the cargo could be sheeted if necessary to offer some protection from weather and general railway dirt. The ‘Lowfit’ wagon depicted by this Bachmann Branchline model was so called because of its low sides and fitted brakes and on the Branchline model, the wagon body is injection moulded, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, while the metal rings fitted to each anchor point are replicated too. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake leavers, brake linkage and a vacuum cylinder all present and correct. The model runs on 3-hole disc wheels which are of metal construction whilst metal buffer heads and cosmetic coupling hooks adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application prototype, completing this high-fidelity model. MODEL FEATURES: Pristine BR Bauxite (Late) livery Running No. B450161 NEM Coupling Pockets Length 88mm (over couplings) - Era 5 - OO Scale

1 Plank 'Lowfit' Wagon BR Bauxite (Late) [W] 'B450166'

1 Plank 'Lowfit' Wagon BR Bauxite (Late) [W] 'B450166' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, flat bed wagons with a single plank along each edge which was hinged and so could be lowered to allow cargo to be rolled on and off. Such wagons were employed to move things like tractors, motor cars and other relatively small machinery that was happy being exposed to the elements during the journey. Anchor points were provided on the wagon floor so that loads could be tied down, and the cargo could be sheeted if necessary to offer some protection from weather and general railway dirt. The ‘Lowfit’ wagon depicted by this Bachmann Branchline model was so called because of its low sides and fitted brakes and on the Branchline model, the wagon body is injection moulded, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, while the metal rings fitted to each anchor point are replicated too. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake leavers, brake linkage and a vacuum cylinder all present and correct. The model runs on 3-hole disc wheels which are of metal construction whilst metal buffer heads and cosmetic coupling hooks adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application prototype, completing this high-fidelity model. MODEL FEATURES: Weathered BR Bauxite (Late) livery Running No. B450166 NEM Coupling Pockets Length 88mm (over couplings) - Era 5 - OO Scale

13T Clayhood (Unfitted) BR Grey Triple Pack (Pack A)

13T Clayhood (Unfitted) BR Grey Triple Pack (Pack A) BR built a total of 875 of these Kernow icons across several batches from 1954 up until 1960. The "Clayhoods were built to complement and eventually replace the GWR O.13 clay wagons  Running in short branchline trains all the way up to 50 wagon mega block trains, this staple of Cornish railway scene were withdrawn and replaced by the air braked CDA wagons in 1988. - OO Scale

13T Clayhood (Unfitted) BR Grey Triple Pack (Pack B)

13T Clayhood (Unfitted) BR Grey Triple Pack (Pack B) BR built a total of 875 of these Kernow icons across several batches from 1954 up until 1960. The "Clayhoods were built to complement and eventually replace the GWR O.13 clay wagons  Running in short branchline trains all the way up to 50 wagon mega block trains, this staple of Cornish railway scene were withdrawn and replaced by the air braked CDA wagons in 1988. - OO Scale

35 Ton PAA Bulk Grain Wagon 'Grainflow' Green & Grey [W]

35 Ton PAA Bulk Grain Wagon 'Grainflow' Green & Grey [W]  The 35 Ton Grain Hopper Wagons, sometimes known as Whisky Covhops (COVered HOPpers), were built in the late-1960s for the transportation of grain from growing regions like East Anglia and South East England to the whisky distilleries of Scotland. The 4 wheel hopper wagons provided an increased payload over the types they replaced and were operated by Associated British Maltsters Ltd. And Scottish Malt Distillers. At first bold and colourful advertising boards were carried on the sides of wagons, but these were soon removed leaving just the brown livery, although some were later painted into the more eye catching ‘Grainflow’ scheme of green and grey. In later years some wagons were used on Alumina traffic in Scotland but all had been withdrawn before the end of the twentieth century. Features: Weathered ‘Grainflow’ Green & Grey Livery Running No. BRT 7781 Length 118mm (over couplings) - Era 8 - OO Scale

35 Ton PAV Bulk Grain Wagon BRT Brown

35 Ton PAV Bulk Grain Wagon BRT Brown The 35 Ton Grain Hopper Wagons, sometimes known as Whisky Covhops (COVered HOPpers), were built in the late-1960s for the transportation of grain from growing regions like East Anglia and South East England to the whisky distilleries of Scotland. The 4 wheel hopper wagons provided an increased payload over the types they replaced and were operated by Associated British Maltsters Ltd. And Scottish Malt Distillers. At first bold and colourful advertising boards were carried on the sides of wagons, but these were soon removed leaving just the brown livery, although some were later painted into the more eye catching ‘Grainflow’ scheme of green and grey. In later years some wagons were used on Alumina traffic in Scotland but all had been withdrawn before the end of the twentieth century. Features: Pristine BRT Brown Livery Running No. 7587 Length 118mm (over couplings) - Era 7 - OO Scale

35 Ton PAV Bulk Grain Wagon BRT Brown [W]

35 Ton PAV Bulk Grain Wagon BRT Brown [W] The 35 Ton Grain Hopper Wagons, sometimes known as Whisky Covhops (COVered HOPpers), were built in the late-1960s for the transportation of grain from growing regions like East Anglia and South East England to the whisky distilleries of Scotland. The 4 wheel hopper wagons provided an increased payload over the types they replaced and were operated by Associated British Maltsters Ltd. And Scottish Malt Distillers. At first bold and colourful advertising boards were carried on the sides of wagons, but these were soon removed leaving just the brown livery, although some were later painted into the more eye catching ‘Grainflow’ scheme of green and grey. In later years some wagons were used on Alumina traffic in Scotland but all had been withdrawn before the end of the twentieth century. Features: Weathered BRT Brown Livery Running No. 7616 Length 118mm (over couplings) - Era 7 - OO Scale

5 Plank Wagon Steel Floor 'Tarslag (1923) Ltd.' Grey (OO)

5 Plank Wagon Steel Floor 'Tarslag (1923) Ltd.' Grey Britain’s Railways were developed primarily to move freight and by the early twentieth century, hundreds of independent companies were operating their own wagons to transport their goods around the UK by rail. Fleet sizes ranged from small concerns with a single wagon to large enterprises whose wagon count could run into the hundreds. The majority of wagons in private ownership were wooden bodied open wagons and by far the most common commodity that they carried was coal, although other materials, including coke, minerals and aggregates might also be transported depending on the nature of business conducted by the wagon’s owner. This model forms part of our new Railway Celebrations range, selected because of its close links to the Stockton & Darlington area and because it symbolises the revolution that the railways provided. Tarslag operated a fleet of hundreds of wagons to carry furnace slag and road asphalt and their operations embodied the freedom of movement afforded by the railway revolution, with concerns in Wolverhampton on the Great Western Railway and Stockton on Tees served by the LNER amongst others, trains including Tarslag wagons would be seen across the UK. The Bachmann Branchline model portrays a 5 Plank Wagon with side doors to aid loading and unloading, and a steel floor. These details are faithfully replicated on the model, with neatly engraved plank lines and finely moulded metal work and rivets. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake levers and metal door stops completing the look. The model runs on split spoked wheels which are of metal construction whilst metal buffer heads and cosmetic coupling hooks adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine ‘Tarslag (1923) Ltd.’ Grey livery Running No. 825 NEM Coupling Pockets Length 83mm (over couplings) - Era 3 - OO Scale

5 Plank Wagon Wooden Floor 'F. H. Silvey & Co.' Brown (OO)

5 Plank Wagon Wooden Floor 'F. H. Silvey & Co.' Brown Britain’s Railways were developed primarily to move freight and by the early twentieth century, hundreds of independent companies were operating their own wagons to transport their goods around the UK by rail. Fleet sizes ranged from small concerns with a single wagon to large enterprises whose wagon count could run into the hundreds. The majority of wagons in private ownership were wooden bodied open wagons and by far the most common commodity that they carried was coal, although other materials, including coke, minerals and aggregates might also be transported depending on the nature of business conducted by the wagon’s owner. Following Nationalisation in 1948, most wagons would be absorbed into British Railways ownership. Various types of 5 Plank Wagon were built, and this Bachmann Branchline model depicts one with side doors to aid loading and unloading, and a wooden floor. These details are faithfully replicated on the model, with neatly engraved plank lines and finely moulded metal work and rivets. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake levers and metal door stops completing the look. The model runs on split spoked wheels which are of metal construction whilst metal buffer heads and cosmetic coupling hooks adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine ‘F. H. Silvey & Co.’ Brown livery Running No. 193 NEM Coupling Pockets Length 83mm (over couplings) - Era 2 - OO Scale

BR (LOCO), 21T Steel Mineral Wagon, DM750586 - Era 4

BR (LOCO), 21T Steel Mineral Wagon, DM750586 - Era 4 Includes: - Detailled body sides - Underframe detail - Coupling pockets (Not NEM coupling pockets) - OO Scale

BR 102T TEA Bogie Tank Wagon Debranded ex-JC Lt Grey [W] PR82678

BR 102T TEA Bogie Tank Wagon Debranded (ex-Jet-Conoco) Light Grey [Weathered] R82678 (ex-136) Rail has long played an important role in transporting fuel around the UK, the thirst for was growing strongly by the mid-twentieth century thanks to the advent of air travel, the private motor vehicle and the dieselisation of Britain’s railways. New, larger wagons were required to meet the demand for fuel transport and the TEA Bogie Tank Wagon provided the answer. The first examples were built during the 1960s with construction of similar types continuing for several decades. TEAs and their derivatives remain the core mode of transport for oil and fuel products today. Features: Weathered and de-branded ‘Jet-Conoco’ Light Grey livery Running No. PR82678 (ex-136) NEM Coupling Pockets Length 238mm - Era 8 - OO Scale

BR 12T Ventilated Van Plywood Sides BR Bauxite (Early)

BR 12T Ventilated Van Plywood Sides BR Bauxite (Early) British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Pristine BR Bauxite (Early) livery Running No. B775484 NEM Coupling Pockets Length 88mm (over couplings)

BR 12T Ventilated Van Plywood Sides BR Bauxite (TOPS)

BR 12T Ventilated Van Plywood Sides BR Bauxite (TOPS) British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 7 Pristine BR Bauxite (TOPS) livery Running No. B769573 TOPS Code VVV NEM Coupling Pockets Length 88mm (over couplings)

BR 12T Ventilated Van Plywood Sides BR Dept. Olive w/Chevrons

BR 12T Ventilated Van Plywood Sides BR Dept. Olive w/Chevrons British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 7 Pristine BR Departmental Olive Green with Chevrons livery Running No. ADB786510 TOPS Code ZRV NEM Coupling Pockets Length 88mm (over couplings)

BR 20T Brake Van LT Barrier Vehicle Red & White B954645

BR 20T Brake Van London Transport Barrier Vehicle Red & White B954645 Features: Pristine London Transport Red & White livery Running No. B954645 NEM Coupling Pockets Length 114mm The BR Standard 20 Ton Brake Van is a classic vehicle and a must for any freight collection or goods yard scene. A mandatory requirement as part of all goods trains until 1968, and in use well into the 1980s with unfitted trains and other selected services, the brake van provided braking facilities and offered the Guard a refuge from the elements in which to stay warm and dry, whilst observing operations via the end windows or side duckets. The Bachmann Branchline 20T Brake Van has long been the model of choice to bring up the rear of many a goods train and it’s easy to see why this model is still a firm favourite. Capturing the character of the prototype, the Branchline model is adorned with separate handrails, roof vents – which on this example are of the oval torpedo variety – and lamp brackets. The footboards are also separately fitted, allowing different lengths to be modelled to suit the van being modelled – in this case long footboards are present.  This particular brake van also carries end weights, is fitted with end handrails, has planked sides and ends and has planked veranda partitions, whilst the cabin doors have two windowpanes each. - Era 8 - OO Scale  

BR 20T Brake Van Rail Express Systems B954735

BR 20T Brake Van Rail Express Systems B954735 Features: Pristine Rail Express Systems livery Running No. B954735 NEM Coupling Pockets Length 114mm The BR Standard 20 Ton Brake Van is a classic vehicle and a must for any freight collection or goods yard scene. A mandatory requirement as part of all goods trains until 1968, and in use well into the 1980s with unfitted trains and other selected services, the brake van provided braking facilities and offered the Guard a refuge from the elements in which to stay warm and dry, whilst observing operations via the end windows or side duckets. The Bachmann Branchline 20T Brake Van has long been the model of choice to bring up the rear of many a goods train and it’s easy to see why this model is still a firm favourite. Capturing the character of the prototype, the Branchline model is adorned with separate handrails, roof vents – which on this example are of the oval torpedo variety – and lamp brackets. The footboards are also separately fitted, allowing different lengths to be modelled to suit the van being modelled – in this case long footboards are present.  This particular brake van also carries end weights, is fitted with end handrails, has planked sides and ends and has planked veranda partitions, whilst the cabin doors have two windowpanes each. - Era 8 - OO Scale

BR 20T Grain Hopper BR Grey (Early) 'B885056'

BR 20T Grain Hopper BR Grey (Early) 'B885056' The BR 20T Grain Hopper wagon is a continuation of an earlier LMS design, built for the transportation of grain in the 1950s. These charming wagons feature a wealth of separately fitted parts, including an end ladder, roof hatches, and underframe equipment. The ubiquitous BR Grey livery is applied using accurate colours and typefaces to produce a wagon fit for any OO scale model railway.    Details: Pristine BR Grey (Early) livery Running No. B885056 Features: NEM Coupling Pockets Length 104mm - OO Scale

BR 22T CPV Presflo Bulk Powder Wagon 'Blue Circle' 'B888556'

BR 22T CPV Presflo Bulk Powder Wagon 'Blue Circle' 'B888556' When British Railways was formed in 1948, it inherited thousands of wagons from the big four. Whilst many of these wagons were perfectly suited for their intended purposes, BR identified a need for a purpose-built wagon to transport powered goods, such as cement, which previously were transported in bags in vans. So, in 1954 the first ‘Presflo’ (short for pressure flow) was built, which utilised the science of air fluidisation, a process which pumps air into the powder to prevent clumping and keep it loose, allowing the powder to be drained from the wagon efficiently. The design was very successful and lasted well into the 1980’s, finding use on different traffic flows up and down the country. This particular model depicts a ‘Presflo’ in BR Bauxite livery with ‘Blue Circle Bulk Cement’ company boards. This Bachmann Branchline ‘Presflo’ tooling suite comprehensively covers the history of these wagons, allowing us to produce a variety of different Presflo types. Our model features a wealth of separately fitted parts, including an end ladder, roof catwalk, handrails and underframe equipment. The ubiquitous BR Bauxite livery is applied using accurate colours and typefaces to produce an iconic wagon fit for any OO scale model railway.     Details: Pristine BR Bauxite ‘Blue Circle Cement’ livery Running No. B888556 Features: Accessory Pack NEM Coupling Pockets Length 87mm - OO Scale

BR 22T CPV Presflo Bulk Powder Wagon 'Tunnel Cement' 'B887990' W

BR 22T CPV Presflo Bulk Powder Wagon 'Tunnel Cement' 'B887990' Weathered When British Railways was formed in 1948, it inherited thousands of wagons from the big four. Whilst many of these wagons were perfectly suited for their intended purposes, BR identified a need for a purpose-built wagon to transport powered goods, such as cement, which previously were transported in bags in vans. So, in 1954 the first ‘Presflo’ (short for pressure flow) was built, which utilised the science of air fluidisation, a process which pumps air into the powder to prevent clumping and keep it loose, allowing the powder to be drained from the wagon efficiently. The design was very successful and lasted well into the 1980’s, finding use on different traffic flows up and down the country. This particular model depicts a ‘Presflo’ in BR Bauxite livery with ‘Tunnel Cement’ branding and a weathered finish. This Bachmann Branchline ‘Presflo’ tooling suite comprehensively covers the history of these wagons, allowing us to produce a variety of different Presflo types. Our model features a wealth of separately fitted parts, including an end ladder, roof catwalk, handrails and underframe equipment. The ubiquitous BR Bauxite livery is applied using accurate colours and typefaces to produce an iconic wagon fit for any OO scale model railway.     Details: Weathered BR Bauxite ‘Tunnel Cement’ livery Running No. B887990 Features: Accessory Pack NEM Coupling Pockets Length 87mm - OO Scale

BR 35T 'Covhop' Covered Hopper BR Bauxite (TOPS) B870780

BR 35T 'Covhop' Covered Hopper BR Bauxite (TOPS) B870780 British Railways produced many standard designs for locomotives and rolling stock, amongst which was the CovHop introduced from 1952 to become the standard covered hopper wagon to transport powders such as sand, soda ash and sugar. The Branchline Covhop boasts a number of interchangeable features allowing individual wagons to be modelled accurately and the wagon depicted here is one with roller bearing axle boxes, OLEO buffers, and disc brakes – these are fitted to one side of the wagon only and necessitate that the wheels on that side are plain disc wheels, as opposed to the 3-hole disc wheels found on the non-braked side. The highly detailed bodyshell is adorned with separate walkways, roof hatches and end bracing, while gravity discharge doors are incorporated into the chassis amongst the running gear. Details: Pristine BR Bauxite (TOPS) livery Running No. B870780 Features: NEM Coupling Pockets Length 104mm (over couplings) - OO Scale

BR FVX Carflat Wagon BR Blue 'Motorail' 'B745075'

BR FVX Carflat Wagon BR Blue 'Motorail' 'B745075' Carflat Wagons allowed cars to be transported by rail, a practice that had started during the early twentieth century, but which became more common after World War Two as more families began realising the dream of owning their own motor vehicle. Many were built from old coach underframes that had had their bodies scrapped, with the type really coming to the fore in 1966 when British Rail launched its Motorail service, providing British holidaymakers with long distance train services where they could take their car on holiday with them, giving the convenience of independent transport whilst on holiday but without the long drive to get there. This Bachmann Branchline model depicts a BR-built Carflat, which to all intents and purposes is a standard BR Mk1 coach underframe running on a pair of BR B1 bogies. The deck of the vehicle is planked, and low side railings are fitted to prevent vehicles from accidentally driving off the side. Like a Mk1 coach, the underside of the vehicle is not overly populated but still features the typical truss frame along with vacuum brake cylinders and, unlike Mk1 coaches, has hand brake levers.     Details: Pristine BR Blue ‘Motorail’ livery Running No. B745075 Features: Accessory Pack NEM Coupling Pockets Length 270mm - OO Scale

BR OCA Open Wagon BR Railfreight Red 112038

BR OCA Open Wagon BR Railfreight Red 112038 The OCA wagons were introduced at the start of the 1980s, becoming British Rail’s final standard design for a general purpose open wagon with wide, low sides made up of three hinged sections etc. to allow all manner of cargo to be loaded and unloaded. Introduced at a time when general merchandise traffic was in decline, the type was soon redeployed to other areas like departmental use, or rebuilt as timber carriers becoming OTAs. The Bachmann Branchline model features fine moulding throughout; from the bodysides and the representation of the doors on each side including hinge and securing chain detailing, to the interior and in particular the wagon floor with engraved planks and further moulded details. The chassis features an ensemble of brake equipment while each axle is mounted to chassis via a separate axlebox assembly, allowing a degree of pivot and rotation to ensure this long wheelbase wagon can negotiate model railway curves. Details: Pristine BR Railfreight Red livery Running No. 112038 Features: NEM Coupling Pockets Length 156mm (over couplings) - OO Scale

BR VAA Van BR Railfreight Red & Grey '200633' [W] (OO)

BR VAA Van BR Railfreight Red & Grey '200633' [W] In the late 1960s British Railways required air braked stock to operate its new Air-Braked Network services – which would later be known as Speedlink -  and the Cov AB (Covered, Air Braked) van provided the answer, becoming BR’s first general purpose air braked van. Introduced from 1969, the Cov ABs had a modern appearance in comparison to the wooden box vans in widespread use at the time and the side of the van was constructed from a pair of doors, providing large openings for loading/unloading. When the Total Operations Processing System (TOPS) was introduced in the 1970s the vans were given the TOPS code VAB, VAA, VBA or VBB. Used to transport general merchandise, the vans were often marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so commenced their withdrawal although a small number remained in service towards the end of the century, coming under private ownership following Privatisation. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Weathered BR Railfreight Red & Grey livery Running No. 200633 NEM Coupling Pockets Length 156mm (over couplings) - Era 7 - OO Scale

BR VAA Van BR Railfreight Red & Grey '200648' (OO)

BR VAA Van BR Railfreight Red & Grey '200648' In the late 1960s British Railways required air braked stock to operate its new Air-Braked Network services – which would later be known as Speedlink -  and the Cov AB (Covered, Air Braked) van provided the answer, becoming BR’s first general purpose air braked van. Introduced from 1969, the Cov ABs had a modern appearance in comparison to the wooden box vans in widespread use at the time and the side of the van was constructed from a pair of doors, providing large openings for loading/unloading. When the Total Operations Processing System (TOPS) was introduced in the 1970s the vans were given the TOPS code VAB, VAA, VBA or VBB. Used to transport general merchandise, the vans were often marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so commenced their withdrawal although a small number remained in service towards the end of the century, coming under private ownership following Privatisation. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine BR Railfreight Red & Grey livery Running No. 200648 NEM Coupling Pockets Length 156mm (over couplings) - Era 7 - OO Scale

BR VBA Van EWS '200557' (OO)

BR VBA Van EWS '200557'  In the late 1960s British Railways required air braked stock to operate its new Air-Braked Network services – which would later be known as Speedlink -  and the Cov AB (Covered, Air Braked) van provided the answer, becoming BR’s first general purpose air braked van. Introduced from 1969, the Cov ABs had a modern appearance in comparison to the wooden box vans in widespread use at the time and the side of the van was constructed from a pair of doors, providing large openings for loading/unloading. When the Total Operations Processing System (TOPS) was introduced in the 1970s the vans were given the TOPS code VAB, VAA, VBA or VBB. Used to transport general merchandise, the vans were often marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so commenced their withdrawal although a small number remained in service towards the end of the century, coming under private ownership following Privatisation. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine EWS livery Running No. 200557 NEM Coupling Pockets Length 156mm (over couplings) - Era 9 - OO Scale

BR VDA Van BR Railfreight Distribution Sector '200882' (OO)

BR VDA Van BR Railfreight Distribution Sector '200882' The VDA van was a development of British Rail’s Cov AB air-braked van which was first introduced in the late 1960s, with the VDAs entering traffic from 1975. Sharing the same 20ft 9in wheelbase as the original Cov ABs, the VDAs not only had sliding doors to allow the sides to be fully opened for loading/unloading but these doors could also be opened individually as cupboard doors to allow quicker access to just one internal area. The vans entered traffic in Speedlink services and were used to transport general merchandise, often being marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so many VDAs were rebuilt to suit new traffic, most notably as OTA timber carrying wagons or low sided ballast/spoil wagons where were often coded as ZCA ‘Sea Urchins’. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine BR Railfreight Distribution Sector livery Running No. 200882 NEM Coupling Pockets Length 156mm (over couplings) - Era 8 - OO Scale

BR VDA Van BR Railfreight Red & Grey '200819' [W] (OO)

BR VDA Van BR Railfreight Red & Grey '200819' [W] The VDA van was a development of British Rail’s Cov AB air-braked van which was first introduced in the late 1960s, with the VDAs entering traffic from 1975. Sharing the same 20ft 9in wheelbase as the original Cov ABs, the VDAs not only had sliding doors to allow the sides to be fully opened for loading/unloading but these doors could also be opened individually as cupboard doors to allow quicker access to just one internal area. The vans entered traffic in Speedlink services and were used to transport general merchandise, often being marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so many VDAs were rebuilt to suit new traffic, most notably as OTA timber carrying wagons or low sided ballast/spoil wagons where were often coded as ZCA ‘Sea Urchins’. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Weathered BR Railfreight Red & Grey livery Running No. 200819 NEM Coupling Pockets Length 156mm (over couplings) - Era 7 - OO Scale

BR, 27T Iron Ore Tippler Wagon - Era 7

BR, 27T Iron Ore Tippler Wagon - Era 7 Includes: - Detailed body sides - Seperate underframe parts - NEM Copulings and pockets - OO Scale

BR, Loriot Y Machinery Truck with British Railways Coles Crane -

BR, Loriot Y Machinery Truck with British Railways Coles Crane - Era 4 Includes: - Loriot Y Flat wagon - Wood deck detailing - NEM coupling pockets - Separate Diecast Coles Crane - British Railways branding - Crane wheels, Jib arm and body are positioning - Era 4  - OO scale Vehicle information: Under the GWR telegraphic code, flat wagons designed to transport heavy machinery carried on the tradition of animal names by being called ‘Loriot’. The first wagon was in service from 1892.  Design for the ‘Loriot’ wagons evolved to include sloping ramps at either end, enabling the machinery to be loaded and unloaded quickly and efficiently. Previous versions featured low, wide wells and no end ramps.  A new wagon in the series, ‘Loriot Y’, was constructed in 1937 to Diagram G39 and its number was No. 41989. An update to the design included ‘I’ beam girders rather than rolled beams and end-axle guard plates. No. 41990 (DW41990 under BR) was the second Loriot Y wagon to be constructed in 1939. The wagon conveyed excavators and other plant machinery over the GWR network. During the Second World War, the two wagons were used constantly to transport bulldozers for when there was wartime bombing. The ‘Loriot Y’ wagon model represents the prototypical wagon under BR ownership. The running number, DW41990, is emblazoned on the side. A wood grain print is used to replicate the wooden planks seen on the prototypical model. The model’s load is a BR Coles Crane, made by CORGI®.

BR, YMO 'Salmon' Bogie Bolster Wagon - Era 7

BR, YMO 'Salmon' Bogie Bolster Wagon The Hornby Salmon range is a new tooling for 2023 with almost all variants of the wagon catered for. Fitted with diecast chassis, these wagons have fantastic weight that rolls freely on metal wheels. Bolsters are included in the accessory Includes: - Detailed wagon body - BR black Livery - Sprung buffers - NEM coupling pockets  - Tension lock couplings - Will traverse minimum 2nd radius curves (R606 / R607) - Era 7 - OO Scale

Diagram N19 – BR No.23016 (OO)

Diagram N19 – BR No.23016 Includes: - BR No.23016 - N19 steel-bodied loco coal wagon - BR(W) livery - Spoked wheels running in metal bearings - High level of detail above and below the floor line - NEM coupler pockets - 1:76 scale (OO gauge)

Diagram N19 – BR No.9912 (OO)

Diagram N19 – BR No.9912 Includes: - BR No.9912 - N19 steel-bodied loco coal wagon - BR(W) livery - Spoked wheels running in metal bearings - High level of detail above and below the floor line - NEM coupler pockets - 1:76 scale (OO gauge)

Diagram N19 – BR No.W9331 (OO)

Diagram N19 – BR No.W9331 Includes: - BR No.W9331 - N19 steel-bodied loco coal wagon - BR grey - Spoked wheels running in metal bearings - High level of detail above and below the floor line - NEM coupler pockets - 1:76 scale (OO gauge)

GER Dia.17 5-plank BR Grey 'E627001'

GER Dia.17 5-plank BR Grey 'E627001' Features: GER Dia.17 5-plank open wagon BR grey No. E627001 Morton 3-shoe brakes with open ratchet (U safety loops) Monarch door mechanism Ribbed buffer housings LNER B1 axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

GER Dia.17 5-plank BR Grey 'E630192'

GER Dia.17 5-plank BR Grey 'E630192' Features: GER Dia.17 5-plank open wagon BR grey No. E630192 Morton 3-shoe brakes with open ratchet (U safety loops) Monarch door mechanism Ribbed buffer housings LNER B1 axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

GER Dia.17 5-plank GER Grey '28601' (as Preserved)

GER Dia.17 5-plank GER Grey '28601' (as Preserved) Features: GER Dia.17 5-plank open wagon GER grey (as preserved) No. 28601 Morton 4-shoe brakes with open ratchet (U safety loops) Monarch door mechanism Ribbed buffer housings LNER B1 axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

GER Dia.17 5-plank GER Grey (post-1902) '29538'

GER Dia.17 5-plank GER Grey (post-1902) '29538' Features: GER Dia.17 5-plank open wagon GER grey (post-1902) No. 29538 Morton 3-shoe brakes with covered ratchet (U safety loops) Monarch door mechanism Ribbed buffer housings GER E-type axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

GER Dia.17 5-plank GER Grey (pre-1902) '24970'

GER Dia.17 5-plank GER Grey (pre-1902) '24970' Features: GER Dia.17 5-plank open wagon GER grey (pre-1902) No. 24970 Single-sided 2-shoe brakes with covered ratchet (J safety loops) Monarch door mechanism Plain buffer housings GER E-type axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

GER Dia.17 5-plank GER Grey (pre-1902) '4014'

GER Dia.17 5-plank GER Grey (pre-1902) '4014' Features: GER Dia.17 5-plank open wagon GER grey (pre-1902) No. 4014 Single-sided 2-shoe brakes with covered ratchet (J safety loops) Double door springs Plain buffer housings GER E-type axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

GER Dia.17 5-plank LDEC Grey '913'

GER Dia.17 5-plank LDEC Grey '913' Features: GER Dia.17 5-plank open wagon LDEC grey No. 913 Single-sided 2-shoe brakes with covered ratchet (J safety loops) Double door springs Plain buffer housings GER E-type axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

GER Dia.17 5-plank LNER Loco Department Green '0197'

GER Dia.17 5-plank LNER Loco Department Green '0197' Features: GER Dia.17 5-plank open wagon LNER loco department green No. 0197 Single-sided 2-shoe brakes with covered ratchet (U safety loops) Double door springs Plain buffer housings GER E-type axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

GER Dia.48 7-plank BR Grey 'E603457'

GER Dia.48 7-plank BR Grey 'E603457' Features: GER Dia.48 7-plank open wagon BR grey No. E603457 Low diagonal braces Morton 3-shoe brakes with open ratchet (U safety loops) Monarch door mechanism Ribbed buffer housings LNER B1 axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

GER Dia.48 7-plank GER Grey '5043' (as Preserved)

GER Dia.48 7-plank GER Grey '5043' (as Preserved) Features: GER Dia.48 7-plank open wagon GER grey (as preserved) No. 5043 Low diagonal braces Single-sided 2-shoe brakes with open ratchet (J safety loops) Monarch door mechanism Ribbed buffer housings LNER B1 axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

GER Dia.48 7-plank GER Grey (post-1902) '9853'

GER Dia.48 7-plank GER Grey (post-1902) '9853' Features: GER Dia.48 7-plank open wagon GER grey (post-1902) No. 9853 Low diagonal braces Single-sided 2-shoe brakes with covered ratchet (J safety loops) Double door springs Plain buffer housings GER E-type axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale  

GER Dia.48 7-plank LNER Loco Department Green '0344'

GER Dia.48 7-plank LNER Loco Department Green '0344' Features: GER Dia.48 7-plank open wagon LNER loco department green No. 0344 High diagonal braces Morton 3-shoe brakes with covered ratchet (U safety loops) Monarch door mechanism Ribbed buffer housings LNER B1 axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

GWR 20T 'Toad' Brake Van BR Departmental Yellow DW35724

GWR 20T 'Toad' Brake Van BR Departmental Yellow DW35724 Features: Pristine BR Departmental Yellow livery Running No. DW35724 NEM Coupling Pockets Length 112mm Brake Vans were once essential parts of any goods train and each railway company had its own designs, but perhaps none were as iconic and widely recognised as the Great Western Railway’s (GWR) ‘Toad’ Brake Van. Found across the GWR network from the late 1800s and into BR ownership serving the Western Region and beyond, the ‘Toad’ provided guards with a spacious cabin and large veranda at one end giving this classic GWR design its distinctive appearance. The Bachmann Branchline ‘Toad’ features an injection moulded bodyshell with plank detail alongside representations of the bodyside handrails and lamp brackets that were fixed to each side and end. The handbrake wheel sits prominently inside the open sided veranda, joined by two sandboxes, whilst below the solebar footboards are fitted separately, and metal spoked wheelsets are employed to provide smooth running. The livery application is to the high standard associated you’ve come to expect from a Bachmann Branchline model, making this ‘Toad’ a perfect addition to any goods wagon fleet. - Era 8 - OO Scale

HIA Hopper (Early Build) Freightliner White 369025 (OO)

HIA Hopper (Early Build) Freightliner White 369025 The HIA limestone hopper was designed for the haulage of limestone, stone and sand and was introduced in 2005 for exclusive operation by Freightliner Heavy Haul Limited. 122 HIA limestone hoppers were manufactured by Wagony Swidinica in Poland. The HIA limestone hopper was 14 metres long with a maximum carrying capacity of 90 tonnes. The wagons worked all over England, typically transporting limestone from Derbyshire (Dowlow) to Yorkshire, Kent, Cambridgeshire, Norfolk and Lancashire.  Features: Finely applied livery with accurately printed detail  Highly level of detail Profiled wheels for exceptionally smooth running NEM pockets with self-centring couplings    - OO Scale

HKA Bogie Hopper DB Schenker '300649'

HKA Bogie Hopper DB Schenker '300649' The HKA Bogie Hopper Wagons originated from JMA Coal Hoppers which were ordered by National Power in the mid-1990s. After being acquired by EWS, many of the JMA fleet were fitted with new bogies and the resulting wagons received the TOPS code HKA – with their use subsequently expanded to aggregate traffic too. It is these wagons that form the prototype for this Bachmann Branchline model and the two variants – inner or outer wagons – can be modelled to suit individual needs. In normal operation HKAs run in fixed rakes with only buffers and conventional couplings fitted to the outer ends of the rake. Wagon-to-wagon coupling is by means of a buckeye, negating the need for buffers. The Branchline model can be configured as either; for an outer wagon the rectangular buffers, drawbar hook and screw-link coupling are fitted into the relevant bufferbeam receptacles, with a dummy tail lamp provided too, while for an inner variant the buckeye coupling and buckeye coupling lever is added. Features: Pristine DB Schenker Red Livery Running No. 300649 Accessory Pack NEM Coupling Pockets Length 267mm (over couplings) - Era 9 - OO Scale

HRA Bogie Hopper DB Cargo 41 70 6723 036-3 (OO)

HRA Bogie Hopper DB Cargo 41 70 6723 036-3 The HRA Bogie Hopper Wagon is the next modern freight wagon to receive the Bachmann Branchline treatment and this model sports the vibrant red livery of DB Cargo. The first HRA entered traffic in 2017, being created by cutting down the HTA wagons, of which more than 1,000 were built for EWS to transport coal. With the phasing out of coal fired power stations, a new use for the HTAs was needed. As stone is far denser than coal, repurposing HTA wagons for aggregate was inefficient as they could not be fully loaded before becoming overweight, therefore shortening the wagons allowed the same payload to be moved with a shorter length train than if unmodified HTAs were used. To create the HRAs, one hopper bay is removed from the HTA before the two ends are welded back together, and these changes are faithfully reproduced on these OO scale models. The ‘cut and shut’ nature of the rebuilds is evidenced by the weld lines midway along the wagon sides and these marks are captured in model form, along with details such as the hopper doors, handwheels and separate pipe runs. Each wagon runs on bogies fitted with metal wheelsets and comes pre-fitted with buckeye couplings – as fitted to most of the prototypes. Standard tension lock couplings which fit into the NEM coupling pockets on the bogies are supplied for optional fitting. DB Cargo’s bright red provides the base colour, against which the logo, safety warnings, instructions and TOPS information all in white contrasts. Buffers are also supplied as optional fittings, allowing wagons to be configured as ‘inners’ without any buffers or as ‘outers’ which usually carry buffers at one end only. Features: Pristine DB Cargo livery Running No. 41 70 6723 036-3 Accessory Pack NEM Coupling Pockets Length 192mm - Era 9 - OO Scale

HRA Bogie Hopper DB Cargo 41 70 6723 062-9 (OO)

HRA Bogie Hopper DB Cargo 41 70 6723 062-9  The HRA Bogie Hopper Wagon is the next modern freight wagon to receive the Bachmann Branchline treatment and this model sports the vibrant red livery of DB Cargo. The first HRA entered traffic in 2017, being created by cutting down the HTA wagons, of which more than 1,000 were built for EWS to transport coal. With the phasing out of coal fired power stations, a new use for the HTAs was needed. As stone is far denser than coal, repurposing HTA wagons for aggregate was inefficient as they could not be fully loaded before becoming overweight, therefore shortening the wagons allowed the same payload to be moved with a shorter length train than if unmodified HTAs were used. To create the HRAs, one hopper bay is removed from the HTA before the two ends are welded back together, and these changes are faithfully reproduced on these OO scale models. The ‘cut and shut’ nature of the rebuilds is evidenced by the weld lines midway along the wagon sides and these marks are captured in model form, along with details such as the hopper doors, handwheels and separate pipe runs. Each wagon runs on bogies fitted with metal wheelsets and comes pre-fitted with buckeye couplings – as fitted to most of the prototypes. Standard tension lock couplings which fit into the NEM coupling pockets on the bogies are supplied for optional fitting. DB Cargo’s bright red provides the base colour, against which the logo, safety warnings, instructions and TOPS information all in white contrasts. Buffers are also supplied as optional fittings, allowing wagons to be configured as ‘inners’ without any buffers or as ‘outers’ which usually carry buffers at one end only. Features: Pristine DB Cargo livery Running No. 41 70 6723 062-9 Accessory Pack NEM Coupling Pockets Length 192mm - Era 9 - OO Scale

HRA Bogie Hopper DB Cargo 41 70 6723 073-6 (OO)

HRA Bogie Hopper DB Cargo 41 70 6723 073-6  The HRA Bogie Hopper Wagon is the next modern freight wagon to receive the Bachmann Branchline treatment and this model sports the vibrant red livery of DB Cargo. The first HRA entered traffic in 2017, being created by cutting down the HTA wagons, of which more than 1,000 were built for EWS to transport coal. With the phasing out of coal fired power stations, a new use for the HTAs was needed. As stone is far denser than coal, repurposing HTA wagons for aggregate was inefficient as they could not be fully loaded before becoming overweight, therefore shortening the wagons allowed the same payload to be moved with a shorter length train than if unmodified HTAs were used. To create the HRAs, one hopper bay is removed from the HTA before the two ends are welded back together, and these changes are faithfully reproduced on these OO scale models. The ‘cut and shut’ nature of the rebuilds is evidenced by the weld lines midway along the wagon sides and these marks are captured in model form, along with details such as the hopper doors, handwheels and separate pipe runs. Each wagon runs on bogies fitted with metal wheelsets and comes pre-fitted with buckeye couplings – as fitted to most of the prototypes. Standard tension lock couplings which fit into the NEM coupling pockets on the bogies are supplied for optional fitting. DB Cargo’s bright red provides the base colour, against which the logo, safety warnings, instructions and TOPS information all in white contrasts. Buffers are also supplied as optional fittings, allowing wagons to be configured as ‘inners’ without any buffers or as ‘outers’ which usually carry buffers at one end only. Features: Pristine DB Cargo livery Running No. 41 70 6723 073-6  Accessory Pack NEM Coupling Pockets Length 192mm - Era 9 - OO Scale

HRA Bogie Hopper DB Cargo 41 70 6723 101-5 (OO)

HRA Bogie Hopper DB Cargo 41 70 6723 101-5 The HRA Bogie Hopper Wagon is the next modern freight wagon to receive the Bachmann Branchline treatment and this model sports the vibrant red livery of DB Cargo. The first HRA entered traffic in 2017, being created by cutting down the HTA wagons, of which more than 1,000 were built for EWS to transport coal. With the phasing out of coal fired power stations, a new use for the HTAs was needed. As stone is far denser than coal, repurposing HTA wagons for aggregate was inefficient as they could not be fully loaded before becoming overweight, therefore shortening the wagons allowed the same payload to be moved with a shorter length train than if unmodified HTAs were used. To create the HRAs, one hopper bay is removed from the HTA before the two ends are welded back together, and these changes are faithfully reproduced on these OO scale models. The ‘cut and shut’ nature of the rebuilds is evidenced by the weld lines midway along the wagon sides and these marks are captured in model form, along with details such as the hopper doors, handwheels and separate pipe runs. Each wagon runs on bogies fitted with metal wheelsets and comes pre-fitted with buckeye couplings – as fitted to most of the prototypes. Standard tension lock couplings which fit into the NEM coupling pockets on the bogies are supplied for optional fitting. DB Cargo’s bright red provides the base colour, against which the logo, safety warnings, instructions and TOPS information all in white contrasts. Buffers are also supplied as optional fittings, allowing wagons to be configured as ‘inners’ without any buffers or as ‘outers’ which usually carry buffers at one end only. Features: Pristine DB Cargo livery Running No. 41 70 6723 101-5 Accessory Pack NEM Coupling Pockets Length 192mm - Era 9 - OO Scale

HTV Hopper BR Bauxite - Pack K

HTV Hopper BR Bauxite - Pack K Features: Minimum Radius 438mm (2nd Radius Set-track) Weight 35g minimum Die-cast chassis for ideal weight RP25-110 profile OO gauge wheels with separate brake blocks in line with tread Sprung metal buffers and dummy instanter couplings Super fine plastic parts, incl. brake gear, lamp irons, handrails, hopper door operating equipment, etc. Removable, Kinetic NEM coupler mounts at correct height with mini-tension-lock couplers provided with scale Instanters included 2mm diameter axles that are 26mm over pinpoints - OO Scale

JGA Bogie Hopper DB Schenker Red 'RMC 19232'

JGA Bogie Hopper DB Schenker Red 'RMC 19232' The JGA Bogie Hoppers were built in Slovakia in the mid-1990s for Buxton Lime Industries and Tilcon, primarily working from Tunstead Quarry, operated by Buxton Lime Industries, near Buxton on the edge of the Peak District. Consisting of a large hopper with three pairs of bottom discharge doors, the wagons were used to transport lime products from the quarry for distribution around the UK and the type remains in use in limited numbers today. Reproduced in OO Scale by Bachmann Branchline, the JGA model features a precision moulded bodyshell which captures the wagon’s distinctive sloping ends with their ribbed constructed. Below the solebar, the three sets of discharge doors are added separately, meanwhile a metal weight is concealed above each bogie to ensure smooth running. The bogies themselves are fitted with metal wheels and axles whilst the integrated NEM coupling pockets allow alternative couplings to be fitted with ease. Separate brakes are added and the bogies each sport spring and suspension detailing in full relief. The bold red livery of DB Schenker faithfully adorns the model, complete with the various markings and operating instructions that are found on the real wagons. Features: Pristine DB Schenker Red livery Running No. RMC 19232 NEM Coupling Pockets Length 199mm (over couplings) - Era 9 - OO Scale

JGA Bogie Hopper VTG Grey 'VTG 19214'

JGA Bogie Hopper VTG Grey 'VTG 19214' The JGA Bogie Hoppers were built in Slovakia in the mid-1990s for Buxton Lime Industries and Tilcon, primarily working from Tunstead Quarry, operated by Buxton Lime Industries, near Buxton on the edge of the Peak District. Consisting of a large hopper with three pairs of bottom discharge doors, the wagons were used to transport lime products from the quarry for distribution around the UK and the type remains in use in limited numbers today. Reproduced in OO Scale by Bachmann Branchline, the JGA model features a precision moulded bodyshell which captures the wagon’s distinctive sloping ends with their ribbed constructed. Below the solebar, the three sets of discharge doors are added separately, meanwhile a metal weight is concealed above each bogie to ensure smooth running. The bogies themselves are fitted with metal wheels and axles whilst the integrated NEM coupling pockets allow alternative couplings to be fitted with ease. Separate brakes are added and the bogies each sport spring and suspension detailing in full relief. Whilst it could be said that the plain grey livery is the very definition of simplicity, the model’s paintwork is applied flawlessly complete with the VTG lettering and logo alongside the various markings and operating instructions that are found on the real wagons. Features: Pristine VTG Grey livery Running No. VTG 19214 NEM Coupling Pockets Length 199mm (over couplings) - Era 9 - OO Scale

L&MR Horse Wagon Pack

L&MR Horse Wagon Pack Includes: - Detailed victorian era wagons - Chain couplings for linking to other Hornby L&MR stock. - Spoked wheels - Wooden body effect  - OO Scale Rolling stock historical information: Liverpool and Manchester Railway Wagons have long been a popular sight in many a railway enthusiasts layout, and pack contains 3 Wagons tailored for horses.

L&MR Sheep Wagon Pack

L&MR Sheep Wagon Pack Includes: - Detailed victorian era wagons - Chain couplings for linking to other Hornby L&MR stock. - Spoked wheels - Wooden body effect  - OO Scale Rolling stock historical information: Liverpool and Manchester Railway Wagons have long been a popular sight in many a railway enthusiasts layout, and pack contains 3 Wagons tailored for sheep.

LB&SCR Dia.8 Van LB&SCR Grey (from 1903) '3820'

LB&SCR Dia.8 Van LB&SCR Grey (from 1903) '3820' Features: LBSC Diagram 8 Van LB&SCR grey (from 1903) No. 3820 Single-sided brakes with single V-hanger Unfitted 9-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

LB&SCR Dia.8 Van MOD Internal User Black '590'

LB&SCR Dia.8 Van MOD Internal User Black '590' Features: LBSC Diagram 8 Van MOD internal user black No. 590 Double-sided brakes with single V-hangers Unfitted 8-spoke wheels running in metal bearings Wooden door stops High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

LB&SCR Dia.8 Van SR Brown (pre-‘36) '46293'

LB&SCR Dia.8 Van SR Brown (pre-‘36) '46293' Features: LBSC Diagram 8 Van SR brown (pre-‘36) No. 46293 Double-sided brakes with double V-hangers Unfitted 9-spoke wheels running in metal bearings Wooden door stops High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

LMS 20T Brake Van LMS (L M S) Grey '730037' (OO)

LMS 20T Brake Van LMS (L M S) Grey '730037' This new Bachmann Branchline model of the LMS Standard 20 Ton Brake Van sets a new standard for these iconic vehicles, of which 2,774 examples were built between 1935 and 1950, first by the London, Midland and Scottish Railway (LMS) and then by British Railways (BR) who recognised the merits of the LMS design. With an extensive tooling suite catering for many of the variations that were incorporated into the real vans during their construction and subsequent use, authentic models can be produced of brake vans in their early years when first entering traffic in the 1930s, to their final days in departmental use at the end of the twentieth century. Boasting a wealth of detail, from the separately fitted metal handrails to the individual brake components and cabin interior, the new Branchline models are fitted with blackened metal wheelsets and NEM coupling pockets, providing smooth running and operational versatility alongside their good looks. The icing on the cake is the livery application, with rich paintwork and authentic numbering and markings, completing this valuable addition to the extensive range of Branchline goods rolling stock. Features: Pristine LMS Grey (L M S) livery Running No. 730037 Model depicts a Diagram D1919 van with: Through Vacuum Pipes Shallow Guard Duckets Narrow Ducket Beading Rivetted End Panels Extended Buffers Shallow Ballast Weights Accessory Pack NEM Coupling Pockets Length 118mm (over couplings) - Era 3 - OO Scale

LMS 20T Brake Van LMS Grey '730203' (OO)

LMS 20T Brake Van LMS Grey '730203' This new Bachmann Branchline model of the LMS Standard 20 Ton Brake Van sets a new standard for these iconic vehicles, of which 2,774 examples were built between 1935 and 1950, first by the London, Midland and Scottish Railway (LMS) and then by British Railways (BR) who recognised the merits of the LMS design. With an extensive tooling suite catering for many of the variations that were incorporated into the real vans during their construction and subsequent use, authentic models can be produced of brake vans in their early years when first entering traffic in the 1930s, to their final days in departmental use at the end of the twentieth century. Boasting a wealth of detail, from the separately fitted metal handrails to the individual brake components and cabin interior, the new Branchline models are fitted with blackened metal wheelsets and NEM coupling pockets, providing smooth running and operational versatility alongside their good looks. The icing on the cake is the livery application, with rich paintwork and authentic numbering and markings, completing this valuable addition to the extensive range of Branchline goods rolling stock. Features: Pristine LMS Grey (LMS) livery Running No. 730203 Model depicts a Diagram D1919 van with: Through Vacuum Pipes Shallow Guard Duckets Narrow Ducket Beading Rivetted End Panels Extended Buffers Shallow Ballast Weights Accessory Pack NEM Coupling Pockets Length 118mm (over couplings) - Era 3 - OO Scale

LMS 20T Iron Ore Hopper BR Grey (Limestone) 'M690335'

LMS 20T Iron Ore Hopper BR Grey (Limestone) 'M690335' Features: LMS 20t Hopper BR Grey (Limestone) No. M690335 Ribbed buffer shanks Disc wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

LMS, 'Salmon' Bogie Wagon - Era 3

LMS, 'Salmon' Bogie Wagon - Era 3 Includes: - Detailed wagon body - LMS bauxite Livery - Sprung buffers - NEM coupling pockets  - Tension lock couplings - Will traverse minimum 2nd radius curves (R606 / R607) - Era 3 - OO Scale

LNER 12T Ventilated Fruit Van BR Bauxite (Early)

LNER 12T Ventilated Fruit Van BR Bauxite (Early) Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, some of which were intended for specific traffic like this Fruit Van built by the London and North Eastern Railway (LNER). The fruit vans sported louvres at each end and ventilators on the roof to allow fresh air to circulate within, keeping fruit fresh during its journey. This Branchline models depicts one of those wooden bodied vans and the planked body is replicated with fine engraving, with precision moulding to capture every detail of the sliding doors and their mechanism, topped off with a separately fitted metal door handle. On the roof, the six ventilators are each moulded in full relief before being added individually, the central pair being offset as per the prototype. The chassis employs metal wheelsets of the 3-hole disc variety around which safety loops are added from formed metal wire, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Pristine BR Bauxite (Early) livery Running No. E222078 NEM Coupling Pockets Length 90mm (over couplings)

LNER 12T Ventilated Fruit Van BR Bauxite (Late)

LNER 12T Ventilated Fruit Van BR Bauxite (Late) Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, some of which were intended for specific traffic like this Fruit Van built by the London and North Eastern Railway (LNER). The fruit vans sported louvres at each end and ventilators on the roof to allow fresh air to circulate within, keeping fruit fresh during its journey. This Branchline models depicts one of those wooden bodied vans and the planked body is replicated with fine engraving, with precision moulding to capture every detail of the sliding doors and their mechanism, topped off with a separately fitted metal door handle. On the roof, the six ventilators are each moulded in full relief before being added individually, the central pair being offset as per the prototype. The chassis employs metal wheelsets of the 3-hole disc variety around which safety loops are added from formed metal wire, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. MODEL FEATURES: Bachmann Branchline OO Scale Era 5 Pristine BR Bauxite (Late) livery Running No. E222476 Lettered ‘VANFIT’ NEM Coupling Pockets Length 90mm (over couplings)

LNWR D84 4-Plank Open BR freight grey 'M230481'

LNWR D84 4-Plank Open BR freight grey 'M230481' Features: LNWR Dia.84 Open No. M230481 BR freight grey Square headstocks Body with overlapping diagonal and extra door strip Short brake handle 2-rib buffers Flat-fronted axleboxes Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

LNWR D84 4-Plank Open LMS grey '275209'

LNWR D84 4-Plank Open LMS grey '275209' Features: LNWR Dia.84 Open No. 275209 LMS grey Incurved headstocks Body with flush diagonals and no door strip Long brake handle 1-rib buffers Bulbous axleboxes Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

LNWR D84 4-Plank Open RNAD grey '281'

LNWR D84 4-Plank Open RNAD grey '281' Features: LNWR Dia.84 Open No. 281 RNAD grey Square headstocks Body with overlapping diagonal and extra door strip Short brake handle 1-rib buffers Flat-fronted axleboxes Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale  

Newton Chambers Car Carrier BR Maroon [W] no.E96297E

Newton Chambers Car Carrier BR Maroon [W] no.E96297E Using new tooling developed for EFE Rail, this OO scale model depicts the Newton Chambers Car Carriers when first introduced on British Railways’ Eastern Region in 1961. The double-deck bogie vehicles were employed primarily on Anglo Scottish services, transporting up to six cars to provide travellers with their own independent means of transport when their rail journey reached its destination. The EFE Rail model captures the distinct character of these vehicles, with finely-moulded panel lines throughout the model and accurate end detailing. The bogies, with their unique 6ft 9in. wheelbase, are something to behold; capturing the relief of the axleboxes and spring leaf suspension, with full brake gear push/pull rods and safety loops fitted separately between the frames. Pinpoint metal wheels ensure smooth running whilst the tension lock coupling is mounted via NEM socket which is mounted on a close-coupling mechanism built into the vehicle’s floor. Features: Weathered BR Lined Maroon Livery Running No. E96297E Branded ‘Eastern Region Car Transporter’ Coded TCV – Two-Tier Motor Car Van Vacuum Braked and through-piped for Steam Heat Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 257mm - Era 5 - OO Scale

PCA Wagon BCC11026 'Blue Circle Cement' Grey [W]

PCA Metalair Bulk Powder Wagon 'Blue Circle Cement' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Blue Circle Cement’ Grey livery Running No. BCC11026 Accessory Pack NEM Coupling Pockets Length 115mm (over couplings)

PCA Wagon BCC11050 'Freightliner Heavy Haul' Grey [W]

PCA Metalair Bulk Powder Wagon 'Freightliner Heavy Haul' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Freightliner Heavy Haul’ Grey livery Running No. BCC11050 Accessory Pack NEM Coupling Pockets

PCA Wagon BCC11089 'Freightliner Heavy Haul' Grey [W]

PCA Wagon BCC11089 'Freightliner Heavy Haul' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Freightliner Heavy Haul’ Grey livery Running No. BCC11089 Accessory Pack NEM Coupling Pockets Length 115mm (over couplings)

PTA BSc Consett/Teesside (pre-TOPS) Pack 1 (Inners & Outers)

PTA BSc Consett/Teesside (pre-TOPS) Pack 1 (Inners & Outers)  Includes: 2548 Outer  2513 Inner 2514 Inner 2515 Inner 2559 Outer  - Working Tail Lamp - OO Scale

PTA BSc Consett/Teesside (pre-TOPS) Pack 2 (Inners)

PTA BSc Consett/Teesside (pre-TOPS) Pack 2 (Inners) Includes: 2466 Inner 2516 Inner 2517 Inner 2518 Inner 2519 Inner - OO Scale

PTA BSc South Wales Grey Pack 1 (Inners & Outers)

PTA BSc South Wales Grey Pack 1 (Inners & Outers) Includes: BSSW 26669 Outer  BSSW 26567 Inner BSSW 26586 Inner BSSW 26646 Inner BSSW 26677 Outer  - Working Tail Lamp - OO Scale

PTA Foster Yeoman Silver (CAIB) Pack 1 (Inners & Outers)

PTA Foster Yeoman Silver (CAIB) Pack 1 (Inners & Outers) Includes: PR 26543  PR 26452  PR 26476  PR 26534  PR 26555 - Working Tail Lamp - OO Scale

PTA Foster Yeoman Silver (CAIB) Pack 2 (Inners)

PTA Foster Yeoman Silver (CAIB) Pack 2 (Inners) Includes: PR 26466  PR 26500  PR 26509  PR 26515  PR 26540  - OO Scale

RailRoad Satlink Western, 45t ZRA Closed Van, KDC201003 - Era 8

RailRoad Satlink Western, 45t ZRA Closed Van, KDC201003 - Era 8 Includes: - Satlink Western Red and Yellow Livery - Body side detail and fine printing - Will traverse Radius 2 curves - Fixed Tension lock couplings - OO scale Vehicle information: The VDA van is a type of air-braked closed van built by BR between 1969 and 1977. The vans, reminiscent of a classic vent van albeit extended served a very similar purpose to their stout predecessors. The VDA was a general use van designed to haul anything and everything.  The VDA vans were used on 'Speedlink' services designed to quickly haul general freight around the country. The wagons were rapidly withdrawn after the 'Speedlink' service was discontinued; 436 vans were in service at the end of 1990 but by August 1994 only 97 were shown on BR books. By 2008, only two VDA vans remained.

Railroad: BR Mk1 NKA 94157 "Super GUV" RES

Railroad: BR Mk1 NKA 94157 "Super GUV" RES Rail Express Services (RES) was the BR sector responsible for the transport of mail and parcels, including the Travelling Post Office. General Utility Vans (GUVs) were used in large numbers to transport mail and parcels, though some were used as newspaper vans.  These vehicles were part of the BR Mk1 coach family and 907 examples were built between 1956 and 1960 by BR at its York, Doncaster and Glasgow works. A number were also produced under contract by the Pressed Steel Company Ltd at Cowley, near Oxford. With a carrying capacity of 13.8 tons (14 tonnes) these multi-door bogie vans were versatile, some even being converted for carrying motor vehicles. Some train operating companies still use them, and a number have found further use at heritage railways.  This RailRoad RES Mk1 Super Guv model coach is a durable, detailed option for your model railway collection. - OO Scale

Railroad: Royal Mail Travelling Post Office 80331

Railroad: Royal Mail Travelling Post Office 80331 The Traveling Post Office (TPO) has been a fixture on Britain’s railways since mail was first carried on trains in the 1830s.  The sorting of mail in transit gradually reduced in the 21st century as mechanised sorting at depots became commonplace and concerns about the safety of workers carrying out letter-sorting at increased main line speeds. The last TPO using carriages in the UK took place during the night of 9th January 2004. After that, a fleet of Royal Mail-branded Class 325 EMUs continued to carry parcels by rail, but these too ceased in 2024. TPOs could collect and deposit mail on the move by means of lineside apparatus. Several of these vehicles have survived in preservation. This Hornby RailRoad model coach features a working mailbag transfer mechanism. - OO Scale

SR 12T Even Planked Ventilated Van BR Bauxite (Early) S49107

SR 12T Even Planked Ventilated Van BR Bauxite (Early) S49107 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine BR Bauxite (Early) livery Running No. S49107 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

SR 12T Even Planked Ventilated Van Express Dairy Company N48359

SR 12T Even Planked Ventilated Van Express Dairy Company N48359 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine Express Dairy Company Blue livery Running No. N48359 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

SR 12T Even Planked Ventilated Van SR Brown 48472

SR 12T Even Planked Ventilated Van SR Brown 48472 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine SR Brown livery Running No. 48472 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

SR Tadpole ex-D1479 Van - British Railways Departmental - Triple

SR Tadpole ex-D1479 Van - British Railways Departmental British Railways Departmental, Circuit Branded Tadpole Classification, Yellow Dot, fitted Head, Ex D1479 patterns Triple Pack includes: Wagon Numbers:   - TDS50812   - TDS50885   - TDS50846 Model Features: - Die-cast metal chassis with plastic body - 60g Weight per Wagon - Three styles of wheel design; Split spoke, single spoke and 3-hole disc - RP25.110 chemically blackened OO gauge wheel sets - Blackened brass bearings conforming to accurascale standards of 14.4mm back-to-back on 2mm axles over 26mm pinpoints.  - Eroded metal, plastic and wire detail parts, including, but not limited to, handrails, grab handles, door handles, lamp brackets, vacuum and steam pipes, though pipes, steam heating cock and break gear.  - Turned sprung metal buffers - NEM standard coupler pockets - Accessory Bag included contains steam/vacuum hoses and screw couplings - OO Scale Vehicle information: The Southern Railways Banana Vans, to Diagrams D1478 and D1479. Found throughout Britain from 1930's through to 1978. These could be seen alongside the Great Western Railway variant Y4 Banana Vans up and down the network. Examples have been preserved.

SR Tadpole Mixed ex-1478/1479 Van - British Railways Departmenta

SR Tadpole Mixed ex-1478/1479 Van - British Railways Departmental Tadpole Classification, Yellow Dot, fitted Head Ex D1478 and D1479 pattern Triple Pack Includes: - Wagons Numbers:   - DS50708   - DS50693   - DS50832 Model Features: - Die-cast metal chassis with plastic body - 60g Weight per Wagon - Three styles of wheel design; Split spoke, single spoke and 3-hole disc - RP25.110 chemically blackened OO gauge wheel sets - Blackened brass bearings conforming to accurascale standards of 14.4mm back-to-back on 2mm axles over 26mm pinpoints.  - Eroded metal, plastic and wire detail parts, including, but not limited to, handrails, grab handles, door handles, lamp brackets, vacuum and steam pipes, though pipes, steam heating cock and break gear.  - Turned sprung metal buffers - NEM standard coupler pockets - Accessory Bag included contains steam/vacuum hoses and screw couplings - OO Scale Vehicle information: The Southern Railways Banana Vans, to Diagrams D1478 and D1479. Found throughout Britain from 1930's through to 1978. These could be seen alongside the Great Western Railway variant Y4 Banana Vans up and down the network. Examples have been preserved.