NCE Power Cab DCC Starter Set

NCE Power Cab DCC Starter Set An entire DCC system in the palm of your hand! This 2 Amp system can operate up to 4 OO sized locomotives or 8 N gauge trains. This cab provides all of the capability and ease of use that you’ve heard about in our Power Pro system, at an entry level price. Installation is a snap. Hook two wires to your track and plug in the cab. You’re off and running trains!   The Power Cab kit contains: NCE Power Cab 7' Power Cab Cable PCP Power Panel EU / UK Approved Power Supply Pro Cab Coiled Cord Manual.  

Oxford Diecast Austin Mini - Speedwell Blue (1:76)

Austin Mini - Speedwell Blue (1:76) The much loved and great classic Austin Mini has been a motoring icon since it was launched in 1959.  This British car, designed by Alec Issigonis and his talented team, set the benchmark and definitely the trend for nippy vehicles ideally suited for towns and cities, where its versatility and ability to park in small spaces made it a must for ordinary young and old to rich and famous motorists alike. Our 1:76 scale miniature comes decorated in pale blue with white roof with an early registration plate – 285 JYB. The interior and the seats are moulded in mid grey with a black steering wheel. The exterior trim is silver including the bumpers, window surrounds and wipers while the radiator grille is silver and black. The colourful Austin badge sits centrally on the edge of the bonnet and the trim is rounded off by the Austin Seven signature across the boot.

Corgi Ford Cortina Mk5 2.0 Ghia S Sirius Red (1:43)

Ford Cortina Mk5 2.0 Ghia S Sirius Red (1:43) The Cortina modelled was ordered by Harry Cooper, the MD of a Derbyshire-based joinery firm, and built in Germany in late 1979. It was supplied by Hanger Ford, Wellford Road, Leicester, on 14th February 1980, and aside from being finished in a rare colour that was only offered for a short time, it is unusual in that he ordered every available option.  These included a sump guard, remote boot release, cruise control and economy lights embedded in the speedometer. Mr Cooper sold it when it was almost five years old, and its second owner kept it for twenty-five years, asking the supplying dealer to fit a Type-9 5-speed Sierra gearbox early in his tenure. By 2009, it had covered 120,000 miles and was purchased by South Wales-based enthusiast Alan Downs for £1,000. He initially used it daily before deciding to restore this uniquely specified car. He stripped it completely and was pleased to find it only needed one new front wing, before having it resprayed.  He fitted as many Ford new old stock parts as possible, powder-coated numerous components, and returned it to the road in spring 2012. It won several prizes at Ford shows but a change in his family circumstances led to its purchase by Ford enthusiast Bruce DiMario from Dorset, in 2013. He rebuilt the noisy back axle before selling the now perfect car to longstanding North Wales-based Ford collector Ian Mills, in May 2014.

Dapol Class 59/0 59002 "Alan J Day" MRL Mendip Rail (Sound/Smoke)

Class 59/0 59002 "Alan J Day" MRL Mendip Rail (Sound/Smoke Fitted) - OO Scale The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Other than 59003 (which after return from loan to HHPI in Germany, is operated by GBRf), the Class 59 fleet is operated today by DB Schenker and Mendip Rail (an ARC and FY joint venture). Model Based on the huge success of the first production run of OO Gauge Class 59’s Dapol have decided to announce the launch of the second production run of this fantastic model. These models will feature lots of era specific details and markings and lots of external body details. They will also include a fully detailed cab. Features DCC fitted Sound Module Installed Smoke Unit Installed Finely moulded body with many applied fine details Printed name plates (Etched plates supplied separately) Cast wheels with fine relief and appropriate colouring Heavy diecast chassis with all wheel pick up NEM coupling pockets as standard All class 59 versions tooled Operating, independently controlled headlight and cab lights (all lighting variations tooled) DCC controlled fully independent lighting: Push/Pull and light engine modes for head and tail lights Day/Night headlamp selection Marker lamp control (where applicable) Independent cab lighting (leading cab /trailing cab /off) (DCC Only) Optional clag smoke simulation on initial acceleration

Peco Wallace & Gromit Aardman 50th Wagon Collectors set (009)

Wallace & Gromit Aardman 50th Wagon Collectors set (009) Celebrate two very special anniversaries with PECO and Aardman. Marking 80 years of PECO and 50 years of Aardman, this exclusive OO-9 Collectors' Set brings together five ready-to-run box vans inspired by the wonderful world of Wallace & Gromit. The set features four characterful liveries inspired by the world of Wallace & Gromit, alongside an exclusive Aardman 50th Anniversary wagon created especially for the 50 Years of Clay celebrations. The five ready-to-run box vans feature: Preston's Dog Food Bake-O-Lite Top Bun Wash 'N' Go Aardman 50th Anniversary – exclusive to the Collectors' Set The set also includes an illustrated commemorative booklet and a set of six collectors' postcards, making it a particularly special release for both model railway enthusiasts and Wallace & Gromit fans. With two much-loved British names celebrating landmark anniversaries, this is a rather cracking collection to add to the layout or keep as a piece of PECO and Aardman memorabilia.

Corgi James Bond Aston Martin DB5 Classic Collection

James Bond Aston Martin DB5 Classic Collection This special premium collector set brings together three versions of the most famous model car ever produced by CORGI to celebrate our 70th anniversary - the Aston Martin DB5. Released in 1965, the 261 was based on a DB4 body and famously painted gold to tie into the film ‘Goldfinger.’ The 270 arrived in 1968 painted in Silver with additional action features from the film. The 2026 ‘Final Edition’ refines the body further and adds correctly colour components. Contains: 3 x Die-cast models

Accurascale BR Mk2C FK M13520 Blue/Grey InterCity (OO)

BR Mk2C FK M13520 Blue/Grey InterCity (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C FK M13527 Provincial Trans-Pennine (OO)

BR Mk2C FK M13527 Provincial Trans-Pennine (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5505 Regional Railways (OO)

BR Mk2C TSO 5505 Regional Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5520 Provincial (Unbranded) (OO)

BR Mk2C TSO 5520 Provincial (Unbranded) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5525 Network SouthEast (OO)

BR Mk2C TSO 5525 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5569 Maroon (South Wales & West) (OO)

BR Mk2C TSO 5569 Maroon (South Wales & West) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO M5561 Blue/Grey InterCity (OO)

BR Mk2C TSO M5561 Blue/Grey InterCity (OO)Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) 6501 Network SouthEast (OO)

BR Mk2C TSO(T) 6501 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO)

BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C FK 13514 Network SouthEast (OO)

BR Mk2C FK 13514 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BFK 17120 Network SouthEast w/ WoE Route Branding (OO)

BR Mk2C BFK 17120 Network SouthEast w/ WoE Route Branding (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BFK IC17177C InterCity Executive (OO)

BR Mk2C BFK IC17177C InterCity Executive (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSK (exBFK) 35506 Regional Railways (OO)

BR Mk2C BSK (exBFK) 35506 Regional Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSK (exBFK) 35508 West Coast Railways (OO)

BR Mk2C BSK (exBFK) 35508 West Coast Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSO 9440 South Wales & West Blue (OO)

BR Mk2C BSO 9440 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5453 South Wales & West Blue (OO)

BR Mk2B TSO 5453 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5463 Maroon (South Wales & West) (OO)

BR Mk2B TSO 5463 Maroon (South Wales & West) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5491 South Wales & West Blue (OO)

BR Mk2B TSO 5491 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Scenecraft Toilet Block (N)

Toilet Block This Scenecraft Toilet Block lets you provide your miniature world with the basic amenities that any visitor to a town, village or tourist destination might expect to find. The quaint structure provides both males and females with public conveniences and is suitable for many different settings, from car parks to camp sites and beaches to bus stations. The embossed stonework is enhanced by etched windows, signage and green foliage at the front providing a warm welcome for those hoping not to be caught short. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting! - N scale

Scenecraft Straight Pavements (x4) (N)

Straight Pavements (x4) Scenecraft helps you create any scene or diorama with buildings, structures and accessories that are fully finished and ready to place on your layout. This set of Straight Pavements includes four pieces that are each engraved with flag and kerbstone detail. Ideal for use with the Corner Pavements & Drop Kerbs (item No. 42-564) to create a convincing street scene or combine multiple packs for larger scenes! MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Pack includes 4 Straight pieces - N Scale

Scenecraft Nissen Hut - (N)

Nissen Hut Prefabricated ‘Nissen Huts’ were the brainchild of American-born, Canadian-British inventor and engineer Major Peter Norman Nissen who developed the design during World War One. Deployed extensively during both World Wars, these half cylindrical huts were made of corrugated steel sheets fixed to a metal frame and could provide accommodation for troops, prisoners of war and civilians – indeed many were used for temporary housing following the Second World War. With examples still in existence across the UK – many having been given a new lease of life as business premises and recreational spaces to name just two – this model can be justified in any scene set from the First World War to the present day. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - N Scale

Scenecraft Corner Pavements and Drop Kerbs (N)

Scenecraft Corner Pavements and Drop Kerbs Scenecraft helps you create any scene or diorama with buildings, structures and accessories that are fully finished and ready to place on your layout. This set of Corner Pavements and Drop Kerbs includes four corners and two drop kerbs and piece is engraved with flag and kerbstone detail. Ideal for use with the Straight Pavements (item No. 42-563) to create a convincing street scene or combine multiple packs for larger scenes! MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Pack includes 4 Corners and 2 Drop Kerbs - N scale

Corgi Messerschmitt Me 262A-2a, ‘Blitz Bomber’ 1./KG51 1944 (1:72)

This 1:72 scale CORGI Aviation Archive diecast model represents one of the most advanced combat aircraft of the Second World War, the Messerschmitt Me 262A-2a 'Blitz Bomber', making it an exceptional addition for any serious aviation collector.  Despite being championed by Hitler as a high-speed bomber to attack strategic Allied positions, this revolutionary jet proved far more effective as a fighter than in its designated bombing role.  This premium diecast model captures the distinctive profile of this groundbreaking aircraft in authentic detail, ready to display straight from the box.   Key Features: Ready to display - no assembly required Authentic 1:72 scale diecast construction Historically accurate 'Blitz Bomber' markings from 1944 Premium metal construction with painted finish Includes display stand History: The Messerschmitt Me 262 was unquestionably the most advanced combat aircraft of the Second World War, representing a quantum leap in aviation technology as the world's first operational jet-powered fighter.  However, Hitler's insistence on deploying these revolutionary aircraft as 'Blitz Bombers' diverted them from their true strength - intercepting Allied bomber formations that were devastating German cities daily. Following the Allied capture of vital bridges over the River Waal in the Netherlands during September 1944, the Germans made desperate attempts to destroy the Waal Bridge at Nijmegen using every weapon at their disposal.  Recognising the strategic importance of these crossings, Hitler ordered the bridges destroyed at all costs and allocated his prized Me 262 'Blitz Bombers' to the mission, believing their incredible speed would guarantee success. Unfortunately for the Luftwaffe pilots, the Allies anticipated the assault and established a formidable anti-aircraft 'ring of steel' around the bridges. This defensive network proved devastatingly effective, shooting down almost every aircraft sent against the target.  This particular 'Blitz Bomber' participated in the autumn 1944 attacks on the Waal bridge but failed to deliver a decisive strike, hampered by both intense defensive fire and the Me 262's general unsuitability as an accurate strike bomber.  The aircraft's incredible speed, whilst an asset in fighter operations, made precision bombing extremely difficult, highlighting the folly of misusing this extraordinary machine.  

Peco LMS/BR 9ft WB Van – British Railways Fitted – Set of 6. (TT)

LMS/BR 9ft WB Van – British Railways Fitted – Set of 6. (TT) TT 1:120 scale 6 individually numbered wagons in Brown M186194 M204565 M116208 M186995 M191154 M230943

Peco LMS/BR 9ft WB Van – British Railways Unfitted – Set of 6. (TT)

LMS/BR 9ft WB Van – British Railways Unfitted – Set of 6.  TT 1:120 Scale 6 individually numbered wagons in Grey: M20009 M212681 M269460 M232487 M159114 M212702

Hornby HM7000: Power Bank Maxi

HM7000: Power Bank Maxi The R7416 Power Bank Maxi is our largest power bank and will keep locomotives with larger motors that require more pulling power, running over any potential dead spots. The space require inside a locomotive for this power bank is 22 x 12 x 10mm.  The Power Bank Maxi can be connected into the current range of HM7000 DCC Bluetooth decoders. A simple plug & play socket means there's no soldering required! Why use one? Your layout will occasionally suffer from dirty track or small electrical dead spots at points and crossings. The small loss of power can cause locomotives to stop, but with DCC Sound Decoders it can also cause the sounds to reset and restart. Avoid both issues by fitting a Power Bank. Perfect locomotive running and optimal control! (The Power Bank is not suitable for use without an HM7000 decoder, connecting it directly to other decoders or directly to the wiring of a model locomotive may cause damage to the Power Bank, your locomotive or your non-HM7000 decoder). For small locomotives we have a smaller Power Bank available R7377 Power Bank

Hornby RailRoad: Class 800 MC Coach 4 Great British Railways

RailRoad: Class 800 MC Coach 4 Great British Railways Utilising the popular Railroad Class 800 tooling, we are thrilled to present a vision of the future: an Azuma in Great British Railways livery!  Based on official documentation of what passenger trains will look like under GBR, this Class 800 Motor Standard Coach makes for a striking addition to your train set or model railway when paired with R30561 Class 800 train pack!  Why not form a complete 5 car train by adding further motor standard coaches, available separately! Model Specification: Railroad specification Class 800 motor standard coach model Durable bodyshell Detailed moulded bogies Matches R30561 Class 800 train pack and other induvial passenger coaches R40570/R40571 Livery: Great British Railways - OO Scale

Hornby RailRoad: Class 800 MS Coach 2 Great British Railways

RailRoad: Class 800 MS Coach 2 Great British Railways Utilising the popular Railroad Class 800 tooling, we are thrilled to present a vision of the future: an Azuma in Great British Railways livery!  Based on official documentation of what passenger trains will look like under GBR, this Class 800 Motor Standard Coach makes for a striking addition to your train set or model railway when paired with R30561 Class 800 train pack!  Why not form a complete 5 car train by adding further motor standard coaches, available separately! Model Specification: Railroad specification Class 800 motor standard coach model Durable bodyshell Detailed moulded bogies Matches R30561 Class 800 train pack and other induvial passenger coaches R40571/R40572 Livery: Great British Railways - OO Scale

Hornby RailRoad: Class 800 MS Coach 3 Great British Railways

RailRoad: Class 800 MS Coach 3 Great British Railways Utilising the popular Railroad Class 800 tooling, we are thrilled to present a vision of the future: an Azuma in Great British Railways livery!  Based on official documentation of what passenger trains will look like under GBR, this Class 800 Motor Standard Coach makes for a striking addition to your train set or model railway when paired with R30561 Class 800 train pack!  Why not form a complete 5 car train by adding further motor standard coaches, available separately! Model Specification: Railroad specification Class 800 motor standard coach model Durable bodyshell Detailed moulded bogies Matches R30561 Class 800 train pack and other induvial passenger coaches R40571/R40572 Livery: Great British Railways - OO Scale

Hornby BR Tavern Coach Pack ‘At the Sign of the Dolphin’

BR Tavern Coach Pack ‘At the Sign of the Dolphin’ This expertly detailed and colourful Southern Region Tavern Car twin pack offers modellers a unique set of restaurant cars, which feature intricate paint and print application, crisply moulded details, and interior lighting. This latest release includes Tavern Car No. S7894 and Composite Saloon No. S7835, and both are decorated in Crimson & Cream livery and named ‘At the Sign of the Dolphin’. Model Specification: Highly detailed models of KB and RCO Tavern Cars Defined bogie mouldings Detailed roof mouldings Separately fitted underframe and gangway end equipment Moulded interior Interior Lighting Kinematic NEM coupling mechanism Accessory Pack Tooling: Original condition Tavern Car without side beading Original condition Composite Saloon with high windows and without side beading Livery: BR Crimson & Cream Faux-pub exterior painted on Tavern Car Accurate colours and fonts - OO Scale  

Hornby RailRoad: Class 800 Great British Railways Train Pack

RailRoad: Class 800 Great British Railways Train Pack Utilising the popular Railroad Class 800 tooling, we are thrilled to present a vision of the future: an Azuma in Great British Railways livery! Based on official documentation of what passenger trains will look like under GBR, this Class 800 train pack consisting of a driving car and dummy car makes for a striking addition to your train set or model railway! Model Specification: Railroad specification Class 800 model Durable bodyshell Reliable motor for continued and long-lasting use Directional Lighting DCC Ready Matches induvial passenger coaches R40570/R40571/R40572 Electronics: 21-pin DCC decoder socket compatible with HM7000 system Compatible with R7322 HM7000-21TXS Sound Decoder and speaker Space for HM7070 power bank for uninterrupted running Livery: Great British Railways - OO Scale  

Hornby RailRoad: Fowler 3F Jinty 16440 LMS Lined Crimson

RailRoad: Fowler 3F Jinty 16440 LMS Lined Crimson Wearing the vibrant lined crimson livery of the LMS, this RailRoad Fowler 3F Jinty numbered 16440 in preservation condition is perfect for all your shunting needs, regardless of the setting! This 0-6-0 tank locomotive has working running gear and a neatly applied paint scheme. Model Specification: RailRoad specification LMS 3F Jinty Moulded details Working connector rods NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: Analogue Livery: LMS lined crimson as preserved Accurate colours and fonts - OO Scale

Hornby Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke)

Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke) This highly detailed model represents famed 'Spam Can' No.35028 ‘Clan Line’ in British Railways lined green livery with early cycling lion emblem on the tender. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis, pony truck and trailing truck Die-cast connecting rods and valve gear High detail cab and fully decorated backhead with decorated instrument dials Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels 8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible DCC Sound: Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of Merchant Navy locomotives Tender speaker Livery: BR Lined Green with ‘Cycling Lion’ early emblem on tender Clan Line etched nameplates Semi-gloss finish Accurate colours and fonts - OO Scale

Hornby LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke)

LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60002 ‘Sir Murrough Wilson’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights. This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any early British Railways model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Non-Corridor Tender Side valence removed Livery: BR Lined Green Named ‘Sir Murrough Wilson’ Cycling Lion on tender Accurate colours and fonts - OO Scale

Hornby LNER A4 60024 'Kingfisher' BR Exp. Ultramarine (Sound/Smoke)

LNER A4 60024 'Kingfisher' BR Experimental Ultramarine (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60024 ‘Kingfisher’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights.  This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any LNER model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Corridor Tender Side valence removed Livery: BR Express Blue Named ‘Kingfisher’ British Railways lettering on tender Accurate colours and fonts - OO Scale

Hornby GWR Saint 2980 'Coeur de Lion' GWR Lined Green (Sound/Smoke)

GWR Saint 2980 'Coeur de Lion' GWR Lined Green (Sound/Smoke) We are delighted to present the next run of OO Gauge GWR Saint Class locomotives in this months range launch, with this particular example being No. 2980 ‘Coeur de Lion’ in Great Western lined green. Utilising the same highly acclaimed tooling used on the first run of Saints last year, this latest release takes the model one step further by the inclusion of a DCC Sound decoder and speaker, 2nd generation steam generator, and revised cab footplate for improved running. Model Specification: High detail OO Gauge model based on extensive research and original works drawings Die-cast Chassis and Running Plate. Model Weight is 341 grams High detail cab and fully decorated backhead with decorated instrument dials Etched metal nameplates Powerful 5 Pole Skew wound motor Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast Piston Rods & valve gear Fully decorated crew figures Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and Rear NEM coupling pocket Separately fitted lamps. Lamp code can be changed Separately fitted simulated coal load Improved cab footplate design Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: 21-Pin DCC Sound decoder pre-fitted HM7000 Power Bank compatible Illuminated flickering firebox DCC Sound: Pre-installed Saint Class sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of Saint Class locomotives Tender speaker Tooling: Tall Chimney Later safety valve with Top Feeds Later curved footplate Fluted piston rods Superheated boiler Collett Tender Livery: GWR Lined Green Great Western tender lettering Accurate colours and fonts - OO Scale

Hornby Playtrains: Tunnel

Playtrains: Tunnel Bring their railway world to life with this exciting tunnel building, designed especially for use with Hornby Playtrains. The perfect way to add scenery and storytelling to your child’s layout, this robust plastic tunnel comes in a simple kit form that’s easy to assemble together.  Once built, it can be configured as either a single or double track tunnel, giving you flexibility as their railway grows. Finished in realistic colours, it adds an authentic touch to their train set while still being tough enough for everyday play.  Children will love guiding their train into the tunnel and waiting for the magical moment it emerges from the “darkness” with its headlight shining — a simple feature that sparks big imagination. Compatible with all Hornby Playtrains toys, it’s an easy way to expand their set, encourage creative layout building, and add even more adventure to every journey around the track.

Hornby Playtrains: Harry Potter Hogwarts Express Train Set (w/ Steam)

Playtrains: Harry Potter Hogwarts Express Train Set (with Sound & Steam) Bring the Magic of the Harry Potter Hogwarts Express Home! Delight your little ones with the Hogwarts Express, a toy train set designed to spark imagination and creativity for children aged 5–8.  Perfect for boys and girls, this beautifully crafted set captures the magic of the world-famous Hogwarts Express train from the Harry Potter films. With real steam, working lights, and authentic sound effects, playtime becomes a fully immersive Wizarding World adventure—safe, fun, and endlessly engaging. The set includes everything needed for magical journeys: the Hogwarts Castle Steam Locomotive, two coaches with magnetic couplings, an easy clip figure-of-8 track with a siding, Kings Cross Platform 9 ¾ Station, Hogsmeade Station buildings, and a hand controller for easy, intuitive operation.  Every detail is designed for hands-on fun and imaginative storytelling, making it the ultimate gift for young Harry Potter fans. This set has everything your children need for hours of fun and the Playtrains toy system offers a host of extra trains, track and buildings that can be added to this set to create a bigger toy train set.  All Playtrains products are compatible. Play, build, and explore with the Playtrains Harry Potter Hogwarts Express train set.

Hornby Playtrains: Metal Works Open and Tipper Wagon Pack

Playtrains: Metal Works Open and Tipper Wagon Pack Add even more hands-on adventure to their Playtrains railway world with this exciting Freight Wagon Pack.  Perfect for children aged 5–8, this pack includes one closed goods wagon and one open tipper wagon — ready to carry everything anything from “important deliveries” to imaginative cargo dreamed up on the living room floor.  Finished in fun yet realistic colour schemes, these wagons bring an authentic freight feel while still capturing a child’s sense of play. They’re the ideal addition to the Steam Goods Train Set (R9361), Blue Ranger Steam Engine (R9378SS) or Steam Tank Engine Express (R9364).  Whether it’s transporting supplies to a town, tipping out loads at a pretend quarry, or making special deliveries, the storytelling possibilities grow with every trip around the track. Simple magnetic couplings make attaching and detaching the wagons quick and frustration-free for little hands, helping children build confidence as they create their own railway world.  More wagons mean more adventures — and even more reasons to keep their railway moving.

Hornby Playtrains: Signal Box

Playtrains: Signal Box Add another layer of imagination to their railway adventures with this signal box, created especially for Hornby Playtrains. An ideal structure for bringing your child’s train set to life, this classic signal box gives every journey a sense of purpose and storytelling.  Children aged 5–8 will love imagining the railway controller inside, deciding when trains can depart, when they must stop, changing the points and keeping everything running smoothly. Made from robust plastic and supplied in a simple kit form, it’s easy to assemble and designed to stand up to enthusiastic everyday play.  The realistic colours add an authentic touch to their Playtrains railway play set-up, helping to create a miniature railway world that feels both fun and believable. Fully compatible with all Hornby Playtrains toys, it’s a simple way to expand their set, encourage creative role play and keep their railway adventures on track.  

Hornby Playtrains: Station and Platform

Playtrains: Station and Platform Complete their railway world with this charming station building set, specially designed for Hornby Playtrains. The perfect way to bring a child’s train set to life, this station adds purpose and storytelling to every journey. With a detailed station building and four platform sections, children can create their very own bustling stop where passengers hop on and off before the next adventure begins.  Made from robust plastic and supplied in a simple kit form, it’s easy to assemble and built to handle enthusiastic play from children aged 5–8. The realistic colours give the layout an authentic feel, while the sturdy construction provides the reassurance parents look for.  Whether they’re announcing arrivals, planning departures or imagining busy travel days, this station set encourages creative role play and longer, more engaging play sessions. Fully compatible with all Hornby Playtrains toys, it’s a wonderful way to expand their railway and make every trip feel like a real journey.

Hornby Playtrains: Harry Potter Hogwarts Express Coach Pack

Playtrains: Harry Potter Hogwarts Express Coach Pack Add even more magic to their railway adventure with the Hogwarts Express Pack of 2 Coaches. Designed as the perfect addition to the Harry Potter Back to Hogwarts Train Set, these extra carriages let young witches and wizards expand their train and bring even more of the wizarding world to life.  Easy to attach with simple magnetic couplings, the coaches click neatly into place, making them ideal for children aged 5–8 to connect and play independently. Whether they’re setting off from Platform 9¾ or imagining the journey to Hogwarts, a longer train means even bigger stories and more creative play.  Built to last and officially licensed, these Hogwarts Express coaches are a wonderful way to grow their set, encourage imaginative storytelling, and make every trip to Hogwarts feel that little bit more magical.

Oxford Diecast Mercedes Whitby Mondial Ice Cream Van Tonibell (1:76)

Mercedes Whitby Mondial Ice Cream Van Tonibell You’ve been treated to this exact same model in 1:43 scale; this issue reveals it joining the 1:148 series too; and now it appears again, especially for 1:76 scale ice cream van followers. It is such a delightful and eye-catching vehicle which is as irresistible as the ice cream!  The frothy bright pink body with black trim is just covered with a mass of pastel shades including the signature Tonibell cow, with her famous bell collar, as she appears on all sides of the van.  Ice cream cones top the front of the roof and the side hatch promotes all the delicious varieties on offer. The Whitby Company set up business in 1962 and acquired the Morrison Industries Electrofreeze company in 1989, to be morphed into Whitby Morrison Mondial. Their worldwide market in ice cream vans spans over 50 countries, all from their Cheshire base, which is still family owned. The sight and sound of an ice cream van always heralds the UK summer and the latest introduction is a sure sign of the season to come! - OO/1:76 Scale

CADA Shell Maintenance Service Station - 330 pcs

Officially licensed by Shell, this quick to build brick model showcases a typical Shell maintenance service station with detailed interior and exterior. A small red motorbike is also included. The model is connectable with other Shell building sets and is sure to look great on display around the home or office. Model Information: Number of pieces: 330 pieces Suitable for ages 8+ years Officially licensed by Shell

CADA Shell Pit Stop Staging Station - 237 pcs

Officially licensed by Shell, this quick to build brick model showcases a typical Shell pit stop with detailed design. A small red and white car is also included. The model is connectable with other Shell building sets and is sure to look great on display around the home or office. Model Information: Number of pieces: 237 pieces Suitable for ages 8+ years Officially licensed by Shell

Rapido UK GWR County No.1013 'County of Dorset' BR Lined Black (Early)

GWR County No.1013 'County of Dorset' BR Lined Black (Early) GWR Class 1000 ‘County’ 1013 “County of Dorset” in BR Lined Black (Early Crest) Black backed number & name plates Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1013 'County of Dorset' BR Lined Black (Early)(SF)

GWR County No.1013 'County of Dorset' BR Lined Black (Early) (Sound Fitted) GWR Class 1000 ‘County’ 1013 “County of Dorset” in BR Lined Black (Early Crest) Black backed number & name plates Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Accurascale Class 50 50035 'Ark Royal' BR Blue (SF)

Class 50 50035 'Ark Royal' BR Blue (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof

Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof (SF)

Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50029 'Renown' Revised NSE w/WofE Branding

Class 50 50029 'Renown' Revised NSE w/WofE Branding Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50029 'Renown' Revised NSE w/WofE Branding (SF)

Class 50 50029 'Renown' Revised NSE w/WofE Branding (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50035 'Ark Royal' BR Blue

Class 50 50035 'Ark Royal' BR Blue Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50019 'Ramillies' BR Laira Departmental Blue

Class 50 50019 'Ramillies' BR Laira Departmental Blue Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50019 'Ramillies' BR Laira Departmental Blue (SF)

Class 50 50019 'Ramillies' BR Laira Departmental Blue (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Scalextric Rally Championship - Hot Laps

Scalextric Rally Championship - Hot Laps Experience the excitement of 1990s rallying with the Rally Championship - Retro Race Set from Scalextric. This mains-powered set captures the iconic rivalry between Colin McRae's Subaru Impreza WRC and Didier Auriol's Toyota Celica GT-Four, complete with working front and rear lights for authentic nighttime rally atmosphere. Featuring the innovative Hot Laps app-powered system, this set offers lap counting and timed challenges with no extra hardware needed. Perfect for rally enthusiasts and parents introducing young drivers to motorsport history through exciting, hands-on play. Features: 2 detailed WRC cars: Subaru Impreza and Toyota Celica Working front and rear lights on both cars Hot Laps app system with 9 layout options Includes flyover section and overhead gantry Mains powered with speed-limiter hand controllers

Academy US Air Force Rockwell B-1B 'Lancer' Heavy Bomber (1:144)

US Air Force B-1B Heavy Bomber US Air Force supersonic strategic bomber with variable-sweep wings. New Tooling MCP Multi Color Parts Adjustable swing wings can be set up in one of four changeable positions Landing gear and bomb bay doors can be built open or closed Mask for painting canopy included Cartograf decals with 3 marking options:  USAF B-1B 86-0123 86-0124  86-0129 - Plastic Kit Requires Glue & Paint to Complete - 1:144 Scale

Bachmann PCA Wagon BCC11026 'Blue Circle Cement' Grey [W]

PCA Metalair Bulk Powder Wagon 'Blue Circle Cement' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Blue Circle Cement’ Grey livery Running No. BCC11026 Accessory Pack NEM Coupling Pockets Length 115mm (over couplings)

Bachmann PCA Wagon BCC11050 'Freightliner Heavy Haul' Grey [W]

PCA Metalair Bulk Powder Wagon 'Freightliner Heavy Haul' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Freightliner Heavy Haul’ Grey livery Running No. BCC11050 Accessory Pack NEM Coupling Pockets

Bachmann PCA Wagon BCC11089 'Freightliner Heavy Haul' Grey [W]

PCA Wagon BCC11089 'Freightliner Heavy Haul' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Freightliner Heavy Haul’ Grey livery Running No. BCC11089 Accessory Pack NEM Coupling Pockets Length 115mm (over couplings)

Bachmann LNER 12T Ventilated Fruit Van BR Bauxite (Early)

LNER 12T Ventilated Fruit Van BR Bauxite (Early) Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, some of which were intended for specific traffic like this Fruit Van built by the London and North Eastern Railway (LNER). The fruit vans sported louvres at each end and ventilators on the roof to allow fresh air to circulate within, keeping fruit fresh during its journey. This Branchline models depicts one of those wooden bodied vans and the planked body is replicated with fine engraving, with precision moulding to capture every detail of the sliding doors and their mechanism, topped off with a separately fitted metal door handle. On the roof, the six ventilators are each moulded in full relief before being added individually, the central pair being offset as per the prototype. The chassis employs metal wheelsets of the 3-hole disc variety around which safety loops are added from formed metal wire, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Pristine BR Bauxite (Early) livery Running No. E222078 NEM Coupling Pockets Length 90mm (over couplings)

Bachmann LNER 12T Ventilated Fruit Van BR Bauxite (Late)

LNER 12T Ventilated Fruit Van BR Bauxite (Late) Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, some of which were intended for specific traffic like this Fruit Van built by the London and North Eastern Railway (LNER). The fruit vans sported louvres at each end and ventilators on the roof to allow fresh air to circulate within, keeping fruit fresh during its journey. This Branchline models depicts one of those wooden bodied vans and the planked body is replicated with fine engraving, with precision moulding to capture every detail of the sliding doors and their mechanism, topped off with a separately fitted metal door handle. On the roof, the six ventilators are each moulded in full relief before being added individually, the central pair being offset as per the prototype. The chassis employs metal wheelsets of the 3-hole disc variety around which safety loops are added from formed metal wire, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. MODEL FEATURES: Bachmann Branchline OO Scale Era 5 Pristine BR Bauxite (Late) livery Running No. E222476 Lettered ‘VANFIT’ NEM Coupling Pockets Length 90mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Bauxite (TOPS)

BR 12T Ventilated Van Plywood Sides BR Bauxite (TOPS) British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 7 Pristine BR Bauxite (TOPS) livery Running No. B769573 TOPS Code VVV NEM Coupling Pockets Length 88mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Dept. Olive w/Chevrons

BR 12T Ventilated Van Plywood Sides BR Dept. Olive w/Chevrons British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 7 Pristine BR Departmental Olive Green with Chevrons livery Running No. ADB786510 TOPS Code ZRV NEM Coupling Pockets Length 88mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Bauxite (Early)

BR 12T Ventilated Van Plywood Sides BR Bauxite (Early) British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Pristine BR Bauxite (Early) livery Running No. B775484 NEM Coupling Pockets Length 88mm (over couplings)

EFE Daimler Fleetline DMS Brighton Corporation 91 Trainer (1:76)

Daimler Fleetline DMS Brighton Corporation 91 Driver Trainer The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example represents the former DMS132 in its post-London guise as Brighton Corporation No. 91. This vehicle was acquired to serve as a driver trainer, and for many years could be seen around the south coast resort as a mobile recruitment advert. It survives today with the Bromley Bus Preservation Group. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Daimler Fleetline DMS115 London Transport Route 170 (1:76)

Daimler Fleetline DMS115 London Transport Route 170 Aldwych The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example is DMS115, which is presented in its original condition, as working on Route 170 to Aldwych circa 1971. As prototypical at the time it sports the ‘open’ style of LT roundel, and is complete with the coin in slot emblems on the front end and PAY AS YOU ENTER notifications. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Daimler Fleetline DMS141 London Transport Route 46 (1:76)

Daimler Fleetline DMS141 London Transport Route 46 Farringdon Street The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example is Abbey District’s DMS141, depicted in its early 1980s condition as working on Route 46 to Farringdon Street, complete with highly visible yellow front entrance doors. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Daimler Fleetline DMS146 London Transport Route 267 (1:76)

Daimler Fleetline DMS146 London Transport Route 267 Hampton Court Stn The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example is DMS146, another ‘open’ rondel DMS, but this time carrying the white band applied to later examples in this batch, which helped break up the wall of red. The model is depicted as working a Route 267 service to Hampton Court Station. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

EFE Daimler Fleetline DMS46 London Transport Route 95 (1:76)

Daimler Fleetline DMS46 London Transport Route 95 Cannon Street The Daimler Fleetline DMS had its origins in a nationwide move towards One-Man Operation (OMO) buses in the late 1960s and early 1970s, replacing the tried-and-tested ‘driver and conductor’ crews that had been the staple for many years. London Transport (LT) was no exception, and as such began to explore the benefits that OMO might bring by trialling Leyland Atlanteans and Daimler Fleetlines. It was the latter that would go on to form the basis of an all-new London bus – the DMS. The first of the new DMSs entered service in January 1971 working on Routes 95 and 220. They were powered by Gardner 6LXB engines and bodied by Park Royal Vehicles, with full OMO considerations included. Passengers would enter through a set of double folding doors at the front, opposite the driver, and immediately pass through an Automatic Fare-Collection (AFC) turnstile (located over the nearside front wheel arch) to gain access to the seating. Exit was via a second set of doors located centrally on the nearside of the body. Building on the popularity of the ‘Routemaster’ tag, London Transport named the new type the ‘Londoner’, but it never caught on, and they were simply referred to as Fleetlines or DMSs. A total of 2,646 would be built between 1970 and 1978; the design evolving during that time, culminating in the B20 type. However, the DMS was never popular with passengers owing to the slower boarding times caused by the AFC equipment, and they proved equally unpopular with garage staff, so much so that the first started to be withdrawn the year after the last was delivered. Our new models represent those built in the first batch, identified by the narrower position of the headlights. This example is DMS46, which in 1974 was the first example to receive the white window surrounds on the upper deck, creating a very pleasing appearance. Our model depicts it as working around 1976 on Route 95 with a Cannon Street destination. The new models are based on EFE Road’s updated Daimler Fleetline DMS tooling and feature the early style front end for the first time on an EFE DMS model. • Colours/details of final model may vary from illustration • Authentically detailed die-cast model from EFE Road • Complementary to OO scale model railways (1:76 scale)

Hornby PO 7 Plank Wagon Mortimore Chippenham No.56 (TT)

PO 7 Plank Wagon Mortimore Chippenham No.56  Few railway designs are as recognisable or numerous as the private owner 3, 5 and 7 plank open wagons from the early 1900s.  Built in the tens, if not hundreds, of thousands, these simple four-axle merchandise wagons would’ve carried all manner of goods, from loose material like sand and coal, to finished products like bricks or cement bags. Finished in colourful schemes devised by the wagon owner, these plank wagons could be seen all over Great Britain during the ‘Big Four’ and early nationalisation in the 1950s.  Our TT:120 scale model covers the 7-plank design, which often featured the most vibrant and interesting brandings. This model is an example of a 7-plank wagon owned by Frederick Cotton Mortimore who was a coal trader in the Somerset and Forest of Dean area. Model Specifications: Detailed planked bodyshell Detailed interior Clasp-style brake rigging Separately fitted buffers Kinematic NEM couplings. Livery: ‘Mortimore’ red Brown interior Satin finish - TT:120 Scale

Hornby HBA Wagon BR Bauxite 360626 (TT)

HBA Wagon BR Bauxite 360626 The BR HBA Wagon 360626 is a 4-axle coal hopper wagon, in BR Bauxite. This British Rail standard design was built to transport domestic coal to urban areas – differing to the classic ‘Merry-Go-Round’ hoppers which took coal directly to power stations. This new wagon is based on extensive research and underwent a painstaking design process, culminating in a product that is highly accurate, features numerous separately fitted parts including brake piping, and includes a die-cast weight for smooth running.  Often seen running in long block rakes or mixed into ‘Speedlink’ railfreight services, the new HBA/HEA family is sure fit in perfectly on any 1970s or later-themed layout. Model Specification:  Extensively researched model of HBA coal hopper wagon Highly detailed Separate parts including brake piping, ladders, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius Tooling: Original suspension Offset ladders Livery: BR Bauxite HBA TOPS code Authentic colours and fonts Semi-gloss finish - TT:120 Scale

Hornby HEA Wagon BR Railfreight 360531,360575,&361303 Triple Pack (TT)

HEA Wagon BR Railfreight 360531, 360575, & 361303 Triple Pack The Railfreight HEA Wagon Triple Pack of models depicts 4-axle coal hopper wagons in BR Railfreight livery numbered 360531, 360575, and 361303. This British Rail standard design was built to transport domestic coal to urban areas – differing to the classic ‘Merry-Go-Round’ hoppers which took coal directly to power stations. These new wagon models are based on extensive research and underwent a painstaking design process, culminating in products that are highly accurate, features numerous separately fitted parts including brake piping, and includes a die-cast weight for smooth running.  Often seen running in long block rakes or mixed into ‘Speedlink’ railfreight services, the new HBA/HEA family is sure fit in perfectly on any 1970s or later themed layout. Model Specification: Extensively researched triple pack of HEA coal hopper wagons Highly detailed Separate parts including brake piping, ladders, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Tooling: Bruninghaus suspension Offset ladders. Livery: BR Railfreight flame red and grey HEA TOPS code Authentic colours and fonts Semi-gloss finish - TT:120 Scale

Hornby HEA Wagon BR Railfreight 360587 (TT)

HEA Wagon BR Railfreight 360587 The Railfreight HEA Wagon 360587 model is an ecample of a HEA 4-axle coal hopper wagon in BR Refreight livery. This British Rail standard design was built to transport domestic coal to urban areas – differing to the classic ‘Merry-Go-Round’ hoppers which took coal directly to power stations. This new wagon is based on extensive research and underwent a painstaking design process, culminating in a product that is highly accurate, features numerous separately fitted parts including brake piping, and includes a die-cast weight for smooth running. Often seen running in long block rakes or mixed into ‘Speedlink’ railfreight services, the new HBA/HEA family is sure fit in perfectly on any 1970s or later themed layout. Model Specification: Extensively researched model of a HEA coal hopper wagon Highly detailed Separate parts including brake piping, ladders, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Tooling: Bruninghaus suspension Offset ladders. Livery: BR Railfreight flame red and grey HEA TOPS code Authentic colours and fonts Semi-gloss finish - TT:120 Scale

Hornby Coalfield Freight Class 37 Train Set (Sound Fitted) (TT)

Coalfield Freight Class 37 Train Set (Sound Fitted) Take a step back in time with ‘Coalfield Freight’ Train Set, the perfect introduction into the terrific world of TT:120 gauge from Hornby.  Whether you’re a beginner, returning to the hobby or a seasoned railway modeller, this starter set has everything you need to get started in the space-saving scale of ‘Tabletop’ TT:120. This set includes a highly detailed model of a Class 37 Diesel locomotive, three colourful wagons, oval starter track, siding and controller. Not only is this set easy to build and endlessly entertaining, the well-designed and durable TT:120 locomotives mean you can rest assured your train set will work for many years to come. With a plethora of separately available extension track packs, rolling stock, buildings and accessories, the possibilities for expanding your collection are endless! Inside the box, you’ll find a highly detailed, motorised diesel locomotive alongside three British Railway freight hopper wagons, each beautifully decorated. The set includes all the track you need to create your miniature railway, as well as an electric controller for smooth operation. Includes: BR Class 37 37799 'Sir Dyfed County of Dyfed' in Triple Grey Coal Sector Livery 3x HFA MGR Coal Hoppers in Coal Sector Livery 3rd Radius Oval of Track with siding (125cm x 84cm) Wall Plug Transformer DCC Power Connecting Track Re-Railer - TT:120 Scale

Hornby Coalfield Freight Class 37 Train Set (TT)

Coalfield Freight Class 37 Train Set Take a step back in time with ‘Coalfield Freight’ Train Set, the perfect introduction into the terrific world of TT:120 gauge from Hornby.  Whether you’re a beginner, returning to the hobby or a seasoned railway modeller, this starter set has everything you need to get started in the space-saving scale of ‘Tabletop’ TT:120. This set includes a highly detailed model of a Class 37 Diesel locomotive, three colourful wagons, oval starter track, siding and controller. Not only is this set easy to build and endlessly entertaining, the well-designed and durable TT:120 locomotives mean you can rest assured your train set will work for many years to come. With a plethora of separately available extension track packs, rolling stock, buildings and accessories, the possibilities for expanding your collection are endless! Inside the box, you’ll find a highly detailed, motorised diesel locomotive alongside three British Railway freight hopper wagons, each beautifully decorated. The set includes all the track you need to create your miniature railway, as well as an electric controller for smooth operation. Includes: BR Class 37 37799 'Sir Dyfed County of Dyfed' in Triple Grey Coal Sector Livery 3x HFA MGR Coal Hoppers in Coal Sector Livery 3rd Radius Oval of Track with siding (125cm x 84cm) DC Train Controller Wall Plug Transformer Power Connecting Track Re-Railer - TT:120 Scale

Hornby SR Merchant Navy 21C4 'Cunard White Star' (TXS Steam Generator)

SR Merchant Navy 21C4 'Cunard White Star' (TXS Steam Generator) The popular Bulleid Pacific Merchant Navy is back in OO gauge with a brand new livery and steam generator technology. This highly detailed model represents the air-smoothed 'Spam Can', also known as 21C4 'Cunard White Star' in Southern Railways' malachite green. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Details: Highly detailed cab with fully decorated backhead and decorated instrument dials  Opening cab roof vent  Removable simulated coal load with fully detailed tender bunker  Accurately modelled Merchant Navy Bullied-Firth-Brown wheels  Modified 21C4 'widows peak' front end streamlining and chimney arrangement  5000 gallon tender with rear access ladders.  Cast trailing truck  Separately fitted nameplate, number plate, and company ownership plate  Circular smokebox door company plate  Sprung metal buffers  Heavy die-cast chassis, pony truck, and trailing truck  Features: Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element).  Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers and HM7000 app control.  Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect.  Adjustable steam output settings via the decoder  Water reservoir for up to 20 minutes of continuous steam running  Die-cast connecting rods and valve gear  Powerful 5-pole skew-wound motor  Flywheel with cardan shaft arrangement for smooth running  Oilite main drive bearings Wheel pickups on tender and driven locomotive wheelsets  Pogo pin wheel pickup arrangement for easy pickup servicing  8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling.  Front and rear NEM coupling pockets, with narrow tension lock couplings  Optional fit rear flanged wheelset (only recommended for larger layouts with sweeping curves or display purposes).  - OO Scale 

Airfix Masking Set - Boeing Chinook - 1:72 Scale

Masking Set - Boeing Chinook - 1:72 Scale

Airfix Masking Set - Bristol Beaufort - 1:72 Scale

Masking Set - Bristol Beaufort - 1:72 Scale

Airfix Masking Set - Bristol Blenheim Mk.I - 1:48 Scale

Masking Set - Bristol Blenheim Mk.I - 1:48 Scale

Airfix Masking Set - Gumman Hellcat - 1:24 Scale

Masking Set - Gumman Hellcat - 1:24 Scale

Airfix Masking Set - Heinkel He111 - 1:72 Scale

Masking Set - Heinkel He111 - 1:72 Scale

Airfix Masking Set - Junkers Ju52/3mg4e - 1:72 Scale

Masking Set - Junkers Ju52/3mg4e - 1:72 Scale

Airfix Masking Set - Junkers Ju87 Stuka - 1:48 Scale

Masking Set - Junkers Ju87 Stuka - 1:48 Scale

Airfix Masking Set - Me410 - 1:72 Scale

Masking Set - Me410 - 1:72 Scale

Airfix Masking Set - Phantom FG.1 - 1:48 Scale

Masking Set - Phantom FG.1 - 1:48 Scale

Airfix Masking Set - SEPECAT Jaguar - 1:48 Scale

Masking Set - SEPECAT Jaguar - 1:48 Scale

Airfix Masking Set - Westland Sea King - 1:48 Scale

Masking Set - Westland Sea King - 1:48 Scale

Airfix Masking Set - Alvis Stalwart - 1:35 Scale

Masking Set - Alvis Stalwart - 1:35 Scale

Airfix Masking Set - Avro Anson Mk.I - 1:48 Scale

Masking Set - Avro Anson Mk.I - 1:48 Scale

Airfix Masking Set - Avro Lancaster - 1:72 Scale

Masking Set - Avro Lancaster - 1:72 Scale

Airfix Masking Set - Boeing B-17 - 1:72 Scale

Masking Set - Boeing B-17 - 1:72 Scale

Pantasy Retro Rotary Telephone - 766 pcs

Retro Rotary Telephone - 766 pcs This is a self-build brick model of a traditional desktop rotary telephone, packed full of interesting features and details. It has a classic black and brown colour scheme with metallic gold colour pieces to help add texture. The top receiver can be lifted off and placed back onto the cradle, just like a real phone. The rotary dial can be turned to simulate dialling and will even reset back to its default position. It is sure to look great on display in your home or office. Features: Detailed replica of a traditional desktop rotary telephone Rounded, tactile receiver can be lifted on and off the cradle Classic black and brown colour scheme Gold colour metallic parts for added detail The rotary dial can be turned to simulate dialling Packed full of interesting details Number of pieces: 766 pieces Suitable for ages 6+ years Model dimensions: 15cm length, 24cm width, 26cm height Box dimensions: 30cm length, 24cm width, 10cm height  

Pantasy Retro Tape Cassette Player - 569 pcs

Retro Tape Cassette Player - 569 pcs This is a self-build brick model of a traditional tape cassette player from the 1980s, complete with plug-in headphones and two tapes. The exterior of the player is finished with a spray paint style metallic blue colour to recreate the authentic sheen of a real cassette player. The headphones can be plugged into two different headphone slots, while the side button can be pressed to open up the tape deck. A display stand is also included for the headphones to be stored raised off the table, plus a stand for one of the tapes. Unfortunately it will not actually play any of your classic 80s tunes, but it is sure to look great on display in your home or office. Features: Detailed replica of a typical 1980s portable tape player Includes model headphones and two tapes Player can be opened and a tape inserted/removed Packed full of interesting details Does not actually play 1980s bangers Number of pieces: 569 pieces Suitable for ages 6+ years Model dimensions (length, width, height) Cassette player: 10cm x 3.5cm x 15cm Tape with stand: 10cm x 7.5cm x 6.5cm Headphones with stand: 18cm x 7.5cm x 22.2cm Box dimensions: 24cm length, 24cm width, 8cm height

Corgi Vauxhall Astra Mk2 GTE 16V, Rembrandt Silver (1:43)

Vauxhall Astra Mk2 GTE 16V, Rembrandt Silver (1:43) Product Information: The GTE 16V modelled was originally registered as a ‘Vauxhall Fleet Management’ car with Vauxhall Motors Ltd, Kimpton Road, Luton, Bedfordshire on 29th November 1990. It was finished in Rembrandt Silver, one of the more unusual colours offered.  Like all 16V GTE’s, it featured GM’s futuristic Liquid Crystal Display dashboard so drivers could see the revs rapidly rising on the car’s magnificent 2-litre DOHC 16-valve ‘red top’ engine, a characterful rev-hungry unit that gave the GTE its appealingly raucous demeanour.  It went on to owners based in Kent, Dorset, County Durham, and Bedfordshire, before being purchased by Bedfordshire-based enthusiast, Lee Proctor, a former Vauxhall employee and subsequent car bodyshop proprietor, in late March 2013. The car had covered 125,000 miles and was complete, but in poor condition. It was bought by Lee as a restoration project, and he soon embarked on a three-year nut-and-bolt structural and mechanical rebuild to concours standard, in which he used as many new old-stock original parts as possible.  He did most of the work himself, bringing the car back to original specification except for the fitting of an ‘Astra Champion’ leather interior, which he had retrimmed. Lee enjoyed driving and showing the finished car, but in November 2020 he sold it to fellow enthusiast and Mk2 Astra Owners Club member, Derbyshire-based Clive Emery.  He has added some original equipment finishing touches and enjoys using it to attend classic car events. This die-cast model represents this car in its restored condition, making it a delightful addition to your Vanguards collection.

Airfix English Electric Canberra B.2 (1:72)

English Electric Canberra B.2 This detailed 1:72 scale model of the English Electric Canberra B.2 allows you to recreate a pivotal piece of British aviation history. Comprising 171 parts and rated at skill level 3, this kit accurately reflects the sleek design of the twin jet-powered bomber that provided the RAF with a technological advantage during the early Cold War. With a wingspan measuring 277mm and three genuine paint options, this plastic model depicts the aircraft that began service with No.101 Squadron in 1951, renowned as one of the swiftest bombers of its era. Key Features: 171 piece model kit in 1:72 scale Skill level 3, suitable for ages 8 and above Three authentic paint schemes included Wingspan of 277mm when completed Aerodynamically accurate representation of the twin jet-powered bomber Cold War era RAF aircraft History: Despite accumulating extensive experience in aircraft manufacturing during World War II, the Lancashire-based English Electric Company had not previously designed their own planes. Thus, when they joined the competition to create a successor to the renowned de Havilland Mosquito, few anticipated their success. By assembling a youthful and skilled design team, they developed what became one of the most important aircraft in British aviation: a twin jet-powered bomber, crafted for speed with an aerodynamic design. The aircraft's potential was evident from the outset, impressing the Air Ministry enough to order 132 units in advance, confident that this new jet would give the Royal Air Force a technological upper hand. When the first B.2 model was deployed with No.101 Squadron in early 1951, it was unmatched by most fighters of the time, establishing the RAF's reputation with an exceptional aircraft admired globally. BAE SYSTEMS is a registered trade mark of BAE Systems plc.

Airfix Sink The Bismarck Gift Set (7 ships) (1:1200)

Sink The Bismarck Gift Set (7 ships) (1:1200) Product Info: This detailed 1:1200 scale model kit represents one of the most intense naval encounters of the Second World War, featuring the powerful ships that participated in the North Atlantic pursuit of Bismarck. Tailored for modellers enhancing their construction skills, this Skill Level 2 kit includes 297 plastic components to assemble several ships from this historic event, recreating the dramatic chase that led to the downfall of one of the world's most formidable battleships.   Key Features: -1:1200 scale models from the Bismarck engagement -297 plastic components to construct multiple ships from this famous naval confrontation -Skill Level 2 - perfect for modellers advancing their building skills -Recreate one of World War Two's most intense naval conflicts -Suitable for ages 8 and above -Part of the Battle of Bismarck collection   History: Bismarck, one of the most formidable battleships ever to sail, posed a significant threat to the Royal Navy and Britain's crucial maritime routes, a threat that needed to be eliminated. Following the loss of HMS Hood, the Admiralty was resolute in its mission to destroy Bismarck, dispatching a formidable task force to track her down. This set the stage for a monumental clash of warships in the North Atlantic, culminating in the destruction of one of the world's great battleships. The pursuit of Bismarck became one of the most significant naval operations of the Second World War, involving numerous ships and aircraft over vast stretches of ocean. After breaking into the Atlantic, Bismarck engaged HMS Hood and HMS Prince of Wales in the Battle of the Denmark Strait, resulting in Hood's destruction by a catastrophic explosion. This devastating loss spurred the Royal Navy to launch an unyielding pursuit, deploying every available resource to locate and destroy the German battleship before she could reach the safety of French ports. The chase ended with a series of air and sea assaults that impaired Bismarck's steering, leaving her defenceless against the advancing British fleet. In the final confrontation, battleships HMS King George V and HMS Rodney, supported by cruisers and destroyers, battered Bismarck into a burning wreck before she was ultimately scuttled by her crew on 27th May 1941, concluding one of naval warfare's most dramatic chapters.

Graham Farish HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371030 (N)

HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371030 The HYA Bogie Hopper Wagons were introduced from 2007 to transport coal to the UK’s coal-fired powers station. In later years, as the country transitioned away from burning coal the wagons were made redundant and found a new use moving biomass for which they were recoded IIA. The imposing wagons are reproduced faithfully in N scale using an injection moulded bodyshell, complete with interior partitions within the hopper, and hopper doors suspended from the underframe. Further details are added in the form of handwheels, lamp irons, buffers and separate pipe runs, and metal weights are fitted above each bogie for smooth and assured running. Those bogies are finely-moulded replicas of the prototype, fitted with metal wheelsets and with standard N scale couplings fitted into the NEM coupling pockets. The real wagons had a bare metal finish which is replicated on the Graham Farish model along with GBRf branding and the word ‘coal’ at one end. The outline of the former FirstGroup logos can also be seen, harking back to the time when the GBRf was owned by the group and operated as First GBRf. Details: Pristine GBRf ‘Coal’ Silver livery Running No. 371030 Features: Accessory Pack NEM Coupling Pockets Length 132mm (over couplings) - N Scale

Graham Farish HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371068 (N)

HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371068 The HYA Bogie Hopper Wagons were introduced from 2007 to transport coal to the UK’s coal-fired powers station. In later years, as the country transitioned away from burning coal the wagons were made redundant and found a new use moving biomass for which they were recoded IIA. The imposing wagons are reproduced faithfully in N scale using an injection moulded bodyshell, complete with interior partitions within the hopper, and hopper doors suspended from the underframe. Further details are added in the form of handwheels, lamp irons, buffers and separate pipe runs, and metal weights are fitted above each bogie for smooth and assured running. Those bogies are finely-moulded replicas of the prototype, fitted with metal wheelsets and with standard N scale couplings fitted into the NEM coupling pockets. The real wagons had a bare metal finish which is replicated on the Graham Farish model along with GBRf branding and the word ‘coal’ at one end. The outline of the former FirstGroup logos can also be seen, harking back to the time when the GBRf was owned by the group and operated as First GBRf. Details: Pristine GBRf ‘Coal’ Silver livery Running No. 371068 Features: Accessory Pack NEM Coupling Pockets Length 132mm (over couplings) - N Scale

Graham Farish IIA Bogie Hopper Wagon GBRf (VTG) Silver 37706955220-8 (N)

IIA Bogie Hopper Wagon GBRf (VTG) Silver 37706955220-8 The IIA Bogie Hopper Wagons started life as HYA Coal Hoppers, introduced from 2007 to deliver the fuel needed to run coal-fired power stations. However, as the UK transitioned away from using coal as the fuel for its power stations, the wagons became redundant and were re-employed on biomass trains, being recoded as IIAs in the process. The imposing wagons are reproduced faithfully in N scale using an injection moulded bodyshell, complete with interior partitions within the hopper, and hopper doors suspended from the underframe. Further details are added in the form of handwheels, lamp irons, buffers and separate pipe runs, and metal weights are fitted above each bogie for smooth and assured running. Those bogies are finely-moulded replicas of the prototype, fitted with metal wheelsets and with standard N scale couplings fitted into the NEM coupling pockets. Owned by VTG Rail but operated by GBRf, the real wagons had a bare metal finish which is replicated on the Graham Farish model along with GBRf and VTG branding. The outline of the former FirstGroup logos can also be seen, harking back to the time when the GBRf was owned by the group and operated as First GBRf. Details: Pristine GBRf (VTG) Silver livery Running No. 37706955220-8 Features: Accessory Pack NEM Coupling Pockets Length 132mm (over couplings) - N Scale  

Graham Farish BR Mk1 POS Royal Mail Travelling Post Office Red 80318 (N)

BR Mk1 POS Royal Mail Travelling Post Office Red 80318 This Graham Farish model of a POS coach carries all the hallmarks of this iconic design, the distinctive profile of the Mk1 coach is captured to a tee from the bodysides to the roof where finely moulded ventilators can be found. On the bodysides the handles and grab handles surrounding each door are moulded precisely, whilst the handrails aside each loading door are separate metal wire fittings. At either end, the corridor gangway is complete with lamp irons on either side and within, the corridor doors are modelled with the two small windows that is flush glazed – in the same way all of the windows on the model are. Metal grab handles are added to each end individually and metal toilet filler pipes extend to the roof. Footboards are included on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders and other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, operating in tandem with the bogie. The icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Details: Pristine Royal Mail Travelling Post Office Red livery Running No. 80318 B4 Bogies Scallop Roof Ventilators Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm (over couplings) - N Scale

Bachmann SSA Scrap Wagon EWS 470078 [W]

SSA Scrap Wagon EWS 470078 [W] The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Weathered EWS livery Running No. 470078 Features: Length 126mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van BR Bauxite (Early) S49107

SR 12T Even Planked Ventilated Van BR Bauxite (Early) S49107 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine BR Bauxite (Early) livery Running No. S49107 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van Express Dairy Company N48359

SR 12T Even Planked Ventilated Van Express Dairy Company N48359 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine Express Dairy Company Blue livery Running No. N48359 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van SR Brown 48472

SR 12T Even Planked Ventilated Van SR Brown 48472 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine SR Brown livery Running No. 48472 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5010

POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5010 The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Pristine Standard Railfreight Blue & Yellow livery Running No. RLS5010 Features: Length 126mm (over couplings) - OO Scale

Bachmann POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5952 [W]

POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5952 [W] The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Weathered Standard Railfreight Blue & Yellow livery Running No. RLS5952 Features: Length 126mm (over couplings) - OO Scale

Bachmann POA Mineral Wagon 'ARC/Tiger' Yellow TRL5313

POA Mineral Wagon 'ARC/Tiger' Yellow TRL5313 The POA Mineral Wagons were created in the late-1980s by building new bodies onto the chassis of redundant tank wagons in order to move aggregates. Owned by Tiger Rail, the wagons were leased to ARC and Foster Yeoman but within a few years, larger bogie wagons were being introduced and the POAs were gradually displaced onto a variety of traffic including scrap metal and coal. Later the wagons were purchased by British Rail and most ended up in engineering use. The Bachmann Branchline model employs a precision bodyshell with panel lines and ribs moulded both inside and out. Individual ladders are fitted to the body and chassis on each side. The chassis features separate brake shoes, brake handles, linkage and auxiliary gear, meanwhile the bufferbeam is completed with metal buffer heads, a coupling hook and lamp iron. Like all Branchline models, metal wheelsets are fitted as standard to ensure smooth running, and NEM coupling pockets make it easy to fit an alternative coupling system where required. Details: Pristine ARC/Tiger Yellow livery Running No. TRL5313 Features: NEM Coupling Pockets Length 121mm (over couplings) - OO Scale

Bachmann POA Mineral Wagon 'ARC/Tiger' Yellow TRL5314 [W]

POA Mineral Wagon 'ARC/Tiger' Yellow TRL5314 [W] The POA Mineral Wagons were created in the late-1980s by building new bodies onto the chassis of redundant tank wagons in order to move aggregates. Owned by Tiger Rail, the wagons were leased to ARC and Foster Yeoman but within a few years, larger bogie wagons were being introduced and the POAs were gradually displaced onto a variety of traffic including scrap metal and coal. Later the wagons were purchased by British Rail and most ended up in engineering use. The Bachmann Branchline model employs a precision bodyshell with panel lines and ribs moulded both inside and out. Individual ladders are fitted to the body and chassis on each side. The chassis features separate brake shoes, brake handles, linkage and auxiliary gear, meanwhile the bufferbeam is completed with metal buffer heads, a coupling hook and lamp iron. Like all Branchline models, metal wheelsets are fitted as standard to ensure smooth running, and NEM coupling pockets make it easy to fit an alternative coupling system where required. Details: Weathered ARC/Tiger Yellow livery Running No. TRL5314 Features: NEM Coupling Pockets Length 121mm (over couplings) - OO Scale

Bachmann POA Mineral Wagon 'Yeoman/Tiger' Grey TRL5355

POA Mineral Wagon 'Yeoman/Tiger' Grey TRL5355 The POA Mineral Wagons were created in the late-1980s by building new bodies onto the chassis of redundant tank wagons in order to move aggregates. Owned by Tiger Rail, the wagons were leased to ARC and Foster Yeoman but within a few years, larger bogie wagons were being introduced and the POAs were gradually displaced onto a variety of traffic including scrap metal and coal. Later the wagons were purchased by British Rail and most ended up in engineering use. The Bachmann Branchline model employs a precision bodyshell with panel lines and ribs moulded both inside and out. Individual ladders are fitted to the body and chassis on each side. The chassis features separate brake shoes, brake handles, linkage and auxiliary gear, meanwhile the bufferbeam is completed with metal buffer heads, a coupling hook and lamp iron. Like all Branchline models, metal wheelsets are fitted as standard to ensure smooth running, and NEM coupling pockets make it easy to fit an alternative coupling system where required. Details: Pristine Yeoman/Tiger Grey livery Running No. TRL5355 Features: NEM Coupling Pockets Length 121mm (over couplings) - OO Scale

Bachmann POA Mineral Wagon 'Yeoman/Tiger' Grey TRL5363 [W]

POA Mineral Wagon 'Yeoman/Tiger' Grey TRL5363 [W] The POA Mineral Wagons were created in the late-1980s by building new bodies onto the chassis of redundant tank wagons in order to move aggregates. Owned by Tiger Rail, the wagons were leased to ARC and Foster Yeoman but within a few years, larger bogie wagons were being introduced and the POAs were gradually displaced onto a variety of traffic including scrap metal and coal. Later the wagons were purchased by British Rail and most ended up in engineering use. The Bachmann Branchline model employs a precision bodyshell with panel lines and ribs moulded both inside and out. Individual ladders are fitted to the body and chassis on each side. The chassis features separate brake shoes, brake handles, linkage and auxiliary gear, meanwhile the bufferbeam is completed with metal buffer heads, a coupling hook and lamp iron. Like all Branchline models, metal wheelsets are fitted as standard to ensure smooth running, and NEM coupling pockets make it easy to fit an alternative coupling system where required. Details: Weathered Yeoman/Tiger Grey livery Running No. TRL5363 Features: NEM Coupling Pockets Length 121mm (over couplings) - OO Scale

Bachmann LMS Jubliee 45671 'Prince Rupert' BR Lined Green (Early)

LMS Jubliee w/Riveted Tender 45671 'Prince Rupert' BR Lined Green (Early) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Early Emblem livery Running No. 45671 Named ‘Prince Rupert’ Etched Nameplates included Long Firebox Single Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubliee 45671 'Prince Rupert' BR Lined Green (Early) (SF)

LMS Jubliee w/Riveted Tender 45671 'Prince Rupert' BR Lined Green (Early) (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Early Emblem livery Running No. 45671 Named ‘Prince Rupert’ Etched Nameplates included Long Firebox Single Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS Jubliee 5742 'Connaught' LMS Crimson Lake

LMS Jubliee w/ Riveted Tender 5742 'Connaught' LMS Crimson Lake The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine LMS Crimson Lake livery Running No. 5742 Named ‘Connaught’ Etched Nameplates included Long Firebox Double Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS Jubliee 5742 'Connaught' LMS Crimson Lake (SF)

LMS Jubliee w/ Riveted Tender 5742 'Connaught' LMS Crimson Lake (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine LMS Crimson Lake livery Running No. 5742 Named ‘Connaught’ Etched Nameplates included Long Firebox Double Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS Jubilee 45596 'Bahamas' BR Lined Green (Late) (SF)

LMS Jubilee w/Welded Tender 45596 'Bahamas' BR Lined Green (Late) (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Locomotive is Preserved Pristine BR Lined Green Late Crest livery Running No. 45596 Named ‘Bahamas’ Etched Nameplates included Short Firebox Double Chimney Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate AWS Equipment Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubilee 45704 'Leviathan' BR Lined Green (Late)

LMS Jubilee w/Fowler Tender 45704 'Leviathan' BR Lined Green (Late) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 45704 Named ‘Leviathan’ Etched Nameplates included Long Firebox Single Chimney Riveted Fowler 3,500-gallon Tender with Water Pick-Up Gear Smokebox Door with Large Numberplate AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubilee 45704 'Leviathan' BR Lined Green (Late) (SF)

LMS Jubilee w/Fowler Tender 45704 'Leviathan' BR Lined Green (Late) (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 45704 Named ‘Leviathan’ Etched Nameplates included Long Firebox Single Chimney Riveted Fowler 3,500-gallon Tender with Water Pick-Up Gear Smokebox Door with Large Numberplate AWS Equipment Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubilee 45596 'Bahamas' BR Lined Green (Late)

LMS Jubilee w/Welded Tender 45596 'Bahamas' BR Lined Green (Late) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Locomotive is Preserved Pristine BR Lined Green Late Crest livery Running No. 45596 Named ‘Bahamas’ Etched Nameplates included Short Firebox Double Chimney Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann Suburban Sulzer Class 25 Train Set

Suburban Sulzer Class 25 Train Set A Bachmann Branchline Train Set is the perfect entry into the wonderful world of model railways. Each set includes everything you need to get up and running so why not indulge today and start the hobby of a lifetime with the Suburban Sulzer Train Set. Trains have long moved commuters from the suburbs into the cities, and these services were once hauled by locomotives, as opposed to the multiple units commonly employed today. This Class 25 diesel locomotive with its Sulzer engine is the perfect motive power to haul these Suburban coaches and provide commuters with a Suburban Sulzer train service connecting the city to the suburbs. Includes: Class 25 Diesel Locomotive in BR Green livery (livery and running number may vary) 2 x BR Mk1 57ft Suburban Coaches in BR Crimson livery (running numbers and coach types will vary) Analogue Controller (with mains power supply) Oval of Track Plug in Wiring Lucsmore Vale Layout Mat - OO Scale

Bachmann Eastern Express 'Green Arrow' Train Set

Eastern Express 'Green Arrow' Train Set A Bachmann Branchline Train Set is the perfect entry into the wonderful world of model railways. Each set includes everything you need to get up and running so why not indulge today and start the hobby of a lifetime with the Eastern Express Train Set. The leader of Sir Nigel Gresley’s Mixed Traffic V2 locomotives was named ‘Green Arrow’, after the express freight services operated by the ‘Big Four’ railway companies, and we’ve paired our model of No. 60800 ‘Green Arrow’ in its BR livery with two Newton Chambers Car Carriers to replicate an express service on BR’s Eastern Region during the final years of steam. Includes: V2 Class No. 60800 ‘Green Arrow in BR Lined Green (Late Crest) livery 2 x Newton Chambers Car Carriers in BR Maroon livery (running numbers will vary and models may have a weathered finish) Analogue Controller (with mains power supply) Oval of Track Plug in Wiring Lucsmore Vale Layout Mat - OO Scale

EFE Leyland Atlantean Open Top Devon General Gift Set (1:76)

Leyland Atlantean Open Top Devon General Gift Set The well-known bus operator, Devon General, began operating regular open top bus tours of the Torbay area in the summer of 1955 using vehicles converted from conventional double deckers. However, in 1961 these were replaced by a fleet of nine specially built Leyland Atlanteans with Metro-Cammell bodies, each seating 75 passengers. The nine were named after historical naval and maritime figures such as Sir Francis Drake and Sir John Hawkins, and soon earned the nickname ‘Sea Dogs’; a term Devon General even adopted for its own marketing. In their distinctive cream and red livery, they became a familiar sight on the 12A-12D routes serving Torquay, Paignton, Brixham, Babbacombe and Kingswear, and carried generations of holidaymakers for the next 20 years. They were built as convertibles, with detachable roofs, meaning that they could operate as normal double deckers during the low season. Upon nationalisation in 1969 Devon General became part of the new National Bus Company (NBC) but was amalgamated with the Western National Omnibus Company (itself part of the NBC) two years later. Under NBC the Sea Dogs were repainted into a poppy red and white livery, and also converted to one-man operation. They initially carried Devon General branding, but this was later superseded by Western National and other NBC liveries as their duties took them further afield into Cornwall and Dorset. Gradually their names disappeared too. Withdrawal commenced in 1982, and the Sea Dogs went their separate ways, finding use in places including London, Lancashire, East Yorkshire and Glasgow. This special twin pack is the third special gift set produced under the EFE Road banner and celebrates the golden era of the ‘Sea Dogs’ with two of the vehicles in the popular Devon General cream livery with red bands. The first of these is registration 932GTA ‘Earl Howe’, which is depicted in its original operating condition, sporting the cream coloured wheels that the type entered service with. As fleet number DL932, it is presented as working service 12D to Babbacombe. The second vehicle in the gift set is classmate 930GTA ‘Sir John Hawkins’, which differs from ‘Earl Howe’ in having red wheels and lifeguards; a change made early on by Devon General owing to the dirt build-up on the original cream wheels. The model also represents the dropping of the DL prefix to the fleet numbers, simply being number 930, and working service 12C to Kingswear.   Like our 2025 ‘Sea Dogs’, the models comprise an amalgamation of new and refreshed tooling, with the enhanced lower decks benefiting from the addition of panel lines and round mirrors for the first time. The upper decks are fitted with metal handrails around the top edge and have the original high position front route blind; the first time these have featured on an EFE Road ‘Sea Dog’. The gift set comes with a reproduction of the original Devon General ‘Sea Dog’ information brochure that was printed to coincide with the launch of the fleet into traffic. Colours/details of final model may vary from illustration Authentically detailed die-cast model from EFE Road Complementary to OO scale model railways (1:76 scale)

EFE Leyland Atlantean Open Top Devon General NBC 928 928GTA (1:76)

Leyland Atlantean Open Top Devon General NBC 928 928GTA The well-known bus operator, Devon General, began operating regular open top bus tours of the Torbay area in the summer of 1955 using vehicles converted from conventional double deckers. However, in 1961 these were replaced by a fleet of nine specially built Leyland Atlanteans with Metro-Cammell bodies, each seating 75 passengers. The nine were named after historical naval and maritime figures such as Sir Francis Drake and Sir John Hawkins, and soon earned the nickname ‘Sea Dogs’; a term Devon General even adopted for its own marketing. In their distinctive cream and red livery, they became a familiar sight on the 12A-12D routes serving Torquay, Paignton, Brixham, Babbacombe and Kingswear, and carried generations of holidaymakers for the next 20 years. They were built as convertibles, with detachable roofs, meaning that they could operate as normal double deckers during the low season. Upon nationalisation in 1969 Devon General became part of the new National Bus Company (NBC) but was amalgamated with the Western National Omnibus Company (itself part of the NBC) two years later. Under NBC the Sea Dogs were repainted into a poppy red and white livery, and also converted to one-man operation. They initially carried Devon General branding, but this was later superseded by Western National and other NBC liveries as their duties took them further afield into Cornwall and Dorset. Gradually their names disappeared too. Withdrawal commenced in 1982, and the Sea Dogs went their separate ways, finding use in places including London, Lancashire, East Yorkshire and Glasgow. Our model depicts registration 928GTA ‘Sir Humphrey Gilbert’ in its post-1969 condition as fleet number 928, finished in NBC Poppy Red and White with Devon General branding, as operating on service 12 to Brixham. It also features period advertising on the original-style rear engine bustle and separately fitted destination banner boards on the body sides. Like our 2025 ‘Sea Dogs’, the model comprises an amalgamation of new and refreshed tooling, with the enhanced lower deck benefiting from the addition of panel lines and round mirrors for the first time. The upper deck is fitted with metal handrails around the top edge and has the original high position front route blind; the first time this has featured on an EFE Road ‘Sea Dog’. Colours/details of final model may vary from illustration Authentically detailed die-cast model from EFE Road Complementary to OO scale model railways (1:76 scale)

EFE Leyland Atlantean Open Top East Yorkshire NBC 904 932GTA (1:76)

Leyland Atlantean Open Top East Yorkshire NBC 904 932GTA The well-known bus operator, Devon General, began operating regular open top bus tours of the Torbay area in the summer of 1955 using vehicles converted from conventional double deckers. However, in 1961 these were replaced by a fleet of nine specially built Leyland Atlanteans with Metro-Cammell bodies, each seating 75 passengers. The nine were named after historical naval and maritime figures such as Sir Francis Drake and Sir John Hawkins, and soon earned the nickname ‘Sea Dogs’; a term Devon General even adopted for its own marketing. In their distinctive cream and red livery, they became a familiar sight on the 12A-12D routes serving Torquay, Paignton, Brixham, Babbacombe and Kingswear, and carried generations of holidaymakers for the next 20 years. They were built as convertibles, with detachable roofs, meaning that they could operate as normal double deckers during the low season.  Upon nationalisation in 1969 Devon General became part of the new National Bus Company (NBC) but was amalgamated with the Western National Omnibus Company (itself part of the NBC) two years later. Under NBC the Sea Dogs were repainted into a poppy red and white livery, and also converted to one-man operation. They initially carried Devon General branding, but this was later superseded by Western National and other NBC liveries as their duties took them further afield into Cornwall and Dorset. Gradually their names disappeared too. Withdrawal commenced in 1982, and the Sea Dogs went their separate ways, finding use in places including London, Lancashire, East Yorkshire and Glasgow. Our model depicts registration 932GTA (originally ‘Earl Howe’) in its circa 1984 condition as working for East Yorkshire NBC in the Bridlington area. It is finished in NBC’s striking white and blue ‘venetian blind’ livery, complete with East Yorkshire branding, fleet number 904 and the name ‘Belvedere Star’. The front blind carries a service 100 to Bridlington destination. Like our 2025 ‘Sea Dogs’, the model comprises an amalgamation of new and refreshed tooling, with the enhanced lower deck benefiting from the addition of panel lines and mirrors. The upper deck is fitted with metal handrails around the top edge and has the original high position front route blind, while at the back that later style of engine bustle is fitted; the first time this combination has featured on an EFE Road ‘Sea Dog’. Colours/details of final model may vary from illustration Authentically detailed die-cast model from EFE Road Complementary to OO scale model railways (1:76 scale)

EFE Leyland Atlantean Open Top Devon General 925 MSJ499 (1:76)

Leyland Atlantean Open Top Devon General 925 MSJ499 The well-known bus operator, Devon General, began operating regular open top bus tours of the Torbay area in the summer of 1955 using vehicles converted from conventional double deckers. However, in 1961 these were replaced by a fleet of nine specially built Leyland Atlanteans with Metro-Cammell bodies, each seating 75 passengers. The nine were named after historical naval and maritime figures such as Sir Francis Drake and Sir John Hawkins, and soon earned the nickname ‘Sea Dogs’; a term Devon General even adopted for its own marketing. In their distinctive cream and red livery, they became a familiar sight on the 12A-12D routes serving Torquay, Paignton, Brixham, Babbacombe and Kingswear, and carried generations of holidaymakers for the next 20 years. They were built as convertibles, with detachable roofs, meaning that they could operate as normal double deckers during the low season. Upon nationalisation in 1969 Devon General became part of the new National Bus Company (NBC) but was amalgamated with the Western National Omnibus Company (itself part of the NBC) two years later. Under NBC the Sea Dogs were repainted into a poppy red and white livery, and also converted to one-man operation. They initially carried Devon General branding, but this was later superseded by Western National and other NBC liveries as their duties took them further afield into Cornwall and Dorset. Gradually their names disappeared too. Withdrawal commenced in 1982, and the Sea Dogs went their separate ways, finding use in places including London, Lancashire, East Yorkshire and Glasgow. Our model depicts the preserved registration MSJ499, which was originally 925GTA ‘Admiral Blake’. It is presented in its current condition, as restored in Devon General cream and red as number 925, and proudly displaying its original name. In this guise ‘Admiral Blake’ can still be seen at bus rallies and on hire duties.   Like our 2025 ‘Sea Dogs’, the model comprises an amalgamation of new and refreshed tooling, with the enhanced lower deck benefiting from the addition of panel lines and mirrors. The upper deck is fitted with metal handrails around the top edge and has the original high position front route blind, while at the back that later style of engine bustle is fitted; the first time this combination has featured on an EFE Road ‘Sea Dog’. Colours/details of final model may vary from illustration Authentically detailed die-cast model from EFE Road Complementary to OO scale model railways (1:76 scale)

EFE Rail Class 23 'Baby Deltic' Headcode Box D5901 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5901 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: With TOPS panel applied before moving to the Railway Technical Centre Pristine BR Green (Small Yellow Panels) livery Running No. D5901 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5903 BR Green (FYE) (N)

Class 23 'Baby Deltic' Headcode Box D5903 BR Green (FYE) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Full Yellow Ends) livery Running No. D5903 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5905 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5905 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Small Yellow Panels) livery Running No. D5905 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5908 BR Green (FYE) (N)

Class 23 'Baby Deltic' Headcode Box D5908 BR Green (FYE) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Full Yellow Ends) livery Running No. D5908 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5909 BR Blue (N)

Class 23 'Baby Deltic' Headcode Box D5909 BR Blue Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Blue livery Running No. D5909 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5902 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5902 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5902 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5906 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5906 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5906 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5907 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5907 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5907 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5909 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5909 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5909 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5900 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5900 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Small Yellow Panels) livery Running No. D5900 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

Graham Farish Class 101 2-Car 'Power Twin' DMU BR Green (Sound Fitted) (N)

Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) (Sound Fitted) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a ‘Power Twin’ comprising two vehicles equipped with an engine and the associated transmission and whilst all of these details are replicated faithfully on the Graham Farish model, just one of the vehicles is motorised. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Green livery with Speed Whiskers 2-Car Unit comprising DMBS No. E51427 and DMCL No. E51497 Destination Blinds for Bradford and Doncaster Headcode B6 displayed at both ends Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) (N)

Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a ‘Power Twin’ comprising two vehicles equipped with an engine and the associated transmission and whilst all of these details are replicated faithfully on the Graham Farish model, just one of the vehicles is motorised. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Green livery with Speed Whiskers 2-Car Unit comprising DMBS No. E51427 and DMCL No. E51497 Destination Blinds for Bradford and Doncaster Headcode B6 displayed at both ends Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Blue (N)

Class 101 2-Car DMU BR Blue The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in BR Blue livery operating in North East England and is typical of much of the fleet during the British Rail era. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Blue livery 2-Car Unit comprising DMBS No. E50166 and DTCL No. E56051 Destination Blinds for Hartlepool and Darlington Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Regional Railways (N)

Class 101 2-Car DMU BR Regional Railways The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in later life and having received a few modifications from its original condition, like the fitting of high intensity headlights and the addition of bodyside heater louvres. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Regional Railways livery Set No. 101660 2-Car Unit comprising DMBS No. 51189 and DTSL No. 54343 Destination Blinds for Sheffield and Manchester Piccadilly Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Regional Railways (Sound Fitted) (N)

Class 101 2-Car DMU BR Regional Railways (Sound Fitted) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in later life and having received a few modifications from its original condition, like the fitting of high intensity headlights and the addition of bodyside heater louvres. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Regional Railways livery Set No. 101660 2-Car Unit comprising DMBS No. 51189 and DTSL No. 54343 Destination Blinds for Sheffield and Manchester Piccadilly Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

EFE Rail 54ft non-Corridor Composite S&DJR Lined Blue

54ft non-Corridor Composite S&DJR Lined Blue The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine S&DJR Lined Blue livery Running No. 55 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Third Caledonian Railway Plum & Off-White

54ft non-Corridor Third Caledonian Railway Plum & Off-White The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine Caledonian Railway Plum & Off-White livery Running No. 1422 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Third LBSCR Raw Umber

54ft non-Corridor Third LBSCR Raw Umber The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine LBSCR Raw Umber livery Running No. 2186 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Third S&DJR Lined Blue

54ft non-Corridor Third S&DJR Lined Blue The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine S&DJR Lined Blue livery Running No. 42 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale  

EFE Rail 54ft non-Corridor Brake Third Caledonian Railway Plum & OffWhite

54ft non-Corridor Brake Third Caledonian Railway Plum & Off-White The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine Caledonian Railway Plum & Off-White livery Running No. 1301 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Brake Third LBSCR Raw Umber

54ft non-Corridor Brake Third LBSCR Raw Umber The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine LBSCR Raw Umber livery Running No. 4935 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Brake Third S&DJR Lined Blue

54ft non-Corridor Brake Third S&DJR Lined Blue The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine S&DJR Lined Blue livery Running No. 134 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Composite Caledonian Railway Plum & Off-White

54ft non-Corridor Composite Caledonian Railway Plum & Off-White The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine Caledonian Railway Plum & Off-White livery Running No. 460 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Composite LBSCR Raw Umber

54ft non-Corridor Composite LBSCR Raw Umber The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine LBSCR Raw Umber livery Running No. 6162 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

Revell Aston Martin DB5 'Goldfinger' CLICK SYSTEM (1:24)

Aston Martin DB5 'Goldfinger' CLICK SYSTEM (1:24) -Innovative click system: No glue required – easy to put together for stable results -Requires cutting from sprue and filling also needed. -True-to-original model from the classic film “Goldfinger” -Extras such as bulletproof armored bulkheads, machine guns and interchangeable license plates can be recreated -Rotating wheels for authentic fun -Can be customized with stickers or decals -Promotes creativity & concentration: Ideal for young model building fans -Step-by-step construction instructions -1:24 scale Background information: The Aston Martin DB5 is considered the most famous film car in the world - and not without reason. In “Goldfinger” (1964), the elegant vehicle first appeared as James Bond’s company car and set a new benchmark for agent technology in the cinema with its sophisticated gadgets. Since then, the DB5 has been closely linked to the 007 mythos and appeared in numerous other Bond films. Its design stands for British elegance, its features for pure action. With this model you can bring a piece of film history straight home - to touch and experience.

Scalextric Pro World GT Race Set

Scalextric Pro World GT Race Set Includes: - DPR - High Detail - Magnatraction - Front Lights - Rear Lights - Compatible with ARC AIR/ARC ONE - Compatible with ARC PRO/Digital (Chip Required) - Compatible with Spark Plug - Easy Change Guide Blade - 1:32 Scale   Set information: Experience authentic GT racing with the Pro - World GT - Race Set from Scalextric. This ARC-enabled digital set features four detailed GT3 cars, Ford Mustang GT3, Porsche 911 GT3 R, Mercedes-AMG GT3, and Chevrolet Corvette GT3.R, complete with wireless rumble controllers and app-powered features like lap timing and fuel management. Perfect for families and collectors who want multi-car action with pit stops and lane-changing across eight customisable layouts.   Key Features: 4 authentic GT3 cars with detailed liveries Wireless controllers with ARC app integration 8 track layouts including pit lane Lane-changing and multi-car racing enabled Front and rear working lights  

Scalextric Pro 24H Hypercar Challenge

Scalextric Pro 24H Hypercar Challenge Includes: - DPR - High Detail - Magnatraction - Front Lights - Rear Lights - Compatible with ARC AIR/ARC ONE - Compatible with ARC PRO/Digital (Chip Required) - Compatible with Spark Plug - Easy Change Guide Blade - 1:32 Scale   Vehicle information: Bring home the excitement of modern endurance racing with the Pro 24hr Le Mans Hypercar Challenge Race Set from Scalextric. Featuring the striking Porsche 963 and bold Cadillac V-Series.R, this mains-powered set delivers authentic Le Mans action with ARC wireless controllers and working headlights. Perfect for collectors and racing enthusiasts who appreciate detailed models and competitive multi-layout racing. With 497 cm of track offering seven alternative configurations, it delivers the spectacle and precision of top-tier motorsport. Key Features: 2 Le Mans hypercar models with working lights ARC wireless rumble controllers included 497 cm track with 7 alternative layouts Patented Magnatraction system for enhanced grip Mains powered with digital upgrade compatibility    

Airfix Pearl Harbor Gift Set (3 aircraft) (1:72)

Pearl Harbor Gift Set (3 aircraft) (1:72) Product Info: This captivating 1:72 scale gift set allows you to recreate the significant events at Pearl Harbour right on your workbench. Comprising 201 plastic components and a skill level 3 build, it is crafted for modellers aged 8 and up, offering a rewarding experience that captures a pivotal moment in history.   Key Features: -1:72 scale model with 201 components for intricate assembly -Skill level 3 design provides a stimulating project for intermediate builders -Plastic parts reflect authentic historical details -Part of the Pearl Harbour collection, commemorating the historic assault -Suitable for ages 8+ with substantial building experience -World War Two era theme

Airfix One Small Step for Man

Airfix - One Small Step for Man (1:72) Product Information: This detailed 1:72 scale model kit celebrates one of humanity's most remarkable achievements - the Apollo 11 lunar landing. With 109 plastic components, it is ideal for modellers aged 8 and up, rated at skill level 2, and captures the essence of that extraordinary day in July 1969 when Neil Armstrong first set foot on the Moon. Key Features: -109 intricately designed plastic parts depicting the Apollo 11 mission -1:72 scale model appropriate for skill level 2 enthusiasts -Celebrates the historic moon landing on 20th July 1969 -Suitable for ages 8 and older -An excellent introduction to space modelling from the Cold War period

Airfix Vintage Classics: HMS Cossack (Tribal class destroyer) (1:600)

Vintage Classics: HMS Cossack (Tribal class destroyer) Experience the storied legacy of HMS Cossack with this 1:600 scale Vintage Classics model kit, featuring 41 meticulously crafted plastic components. As one of the 16 notable British Tribal Class destroyers, HMS Cossack was a formidable and well-armed ship that joined the Royal Navy's fleet at the onset of the Second World War, enhancing their naval strength. This Skill Level 2 kit is designed for modellers aged 8 and up, offering a detailed representation of one of the Royal Navy's most distinguished warships. Key Features: 1:600 scale model with 41 precision plastic components Skill Level 2 - ideal for modellers aged 8 years and older Represents one of the 16 renowned British Tribal Class destroyers Contains parts to assemble the advanced and heavily armed HMS Cossack Includes a single authentic World War Two era paint scheme History: HMS Cossack was part of the Royal Navy's esteemed Tribal Class destroyers, marking a significant leap in naval prowess upon her commissioning. These ships were engineered as robust, heavily armed vessels, capable of handling the demands of contemporary naval engagements. The ship gained enduring recognition in February 1940 during the dramatic Altmark Incident. Her crew courageously boarded the German supply vessel Altmark in Norwegian waters, freeing over 300 Allied sailors who had been captured during the pocket battleship Admiral Graf Spee's prior commerce raiding activities in the Atlantic. This bold action exemplified the Royal Navy's tenacity and was one of the early notable achievements of the Second World War. HMS Cossack remained active throughout the war, taking part in various missions and convoy escorts, symbolising the bravery and resolve of the Royal Navy during Britain's most challenging times. The Tribal Class destroyers proved to be formidable combatants, combining substantial firepower with the agility and speed required for modern naval warfare. This Vintage Classics kit offers modellers the chance to recreate this historic ship, capturing the unique design and essence of one of the Royal Navy's most celebrated destroyers from the Second World War era.

Airfix Vintage Classics: Centurion Mk.8 Tank (1:76)

Vintage Classics: Centurion Mk.8 Tank This detailed 1:76 scale model kit represents the Centurion Mk.8, a highly successful British post-war tank known for its robust armour, superior mobility, and formidable firepower. Comprising 103 parts and rated at skill level 3, this kit provides a rewarding challenge for military model enthusiasts, faithfully depicting the tank's iconic features. Key Features: 1:76 scale model kit with 103 components for intricate assembly Skill level 3, ideal for modellers aged 8 and over Includes three authentic Cold War era paint options Faithfully replicates the Centurion Mk.8's unique heavy armour and firepower Part of the Vintage Classics series celebrating iconic military vehicles History: The Centurion Mk.8 stands out as one of Britain's most effective post-war tanks, merging substantial armour with excellent mobility and firepower. Although conceived during the final stages of World War II, it entered service too late for that conflict but proved its worth as a highly effective and enduring tank design throughout the twentieth century. The Mk.8 version marked a significant step forward in the Centurion's evolution, integrating combat experience and technological advancements. It boasted upgraded weaponry and improved armour, establishing itself as a formidable force on the battlefield. The Centurion participated in numerous global conflicts, setting a benchmark for modern tank design. Its combination of powerful weaponry, strong protection, and dependable performance made it a versatile and reliable combat vehicle. The Centurion's success was not only due to its individual features but also its adaptability-the core design allowed for continuous upgrades and modifications, keeping it in active service with various military forces worldwide for many years.

Airfix Vintage Classics: Crash Recovery Set (Queen Mary + Crane)(1:76)

Crash Recovery Set (Queen Mary + crane) Vintage Classics  This 1:76 scale Crash Recovery Set vividly depicts the essential support vehicles that were crucial to RAF operations in the 1940s and 50s. The 147-piece plastic kit features a Bedford Ox tractor with a Queen Mary Trailer and a Thornycroft Amazon equipped with a crane, offering an ideal base for crafting detailed diorama scenes of aircraft recovery and maintenance. Designed for modellers aged 8 and up, this Skill Level 3 kit includes two unique paint schemes and provides endless possibilities for creative scene construction. Key Features: Bedford Ox tractor unit with Queen Mary Trailer designed for moving aircraft fuselages and large components Thornycroft Amazon recovery vehicle with crane for lifting tasks 147 intricately moulded plastic parts reflecting authentic historical details Two paint schemes provided to depict various wartime airfield units Skill Level 3 kit appropriate for modellers aged 8 years and older 1:76 scale - perfect for building dioramas alongside Airfix aircraft model kits Ideal starting point for recreating bustling wartime Maintenance Unit scenes History: The numerous wartime airfields and Maintenance Units spread across the UK were bustling hubs of activity during the 1940s and 50s, capturing the imagination of modellers since the hobby's inception. Recreating these scenes as scale model dioramas has been a cherished activity for years, with this classic Recovery Set offering abundant inspiration for creative modellers. The Bedford Ox was among the most adaptable and dependable vehicles in British military service during World War II. Coupled with the Queen Mary Trailer, named for its considerable size and prestigious cargo, it served as the primary means of transporting dismantled or damaged aircraft between airfields and maintenance sites. The Thornycroft Amazon, with its sturdy crane, was equally vital for lifting tasks, moving engines, and handling significant airframe components during recovery and repair operations. These vehicles were the backbone of RAF ground support, working tirelessly to maintain the operational status of Britain's fighter and bomber squadrons. Whether recovering crashed aircraft from rural areas, transporting newly assembled machines to active squadrons, or moving damaged airframes to Maintenance Units for rebuilding, these recovery teams played a crucial yet often overlooked role in sustaining the RAF's operational capabilities throughout the war and into the post-war era. This classic Airfix set encapsulates the essence of these dynamic airfield scenes, allowing modellers to recreate scenarios such as a dismantled Spitfire or a Vickers Wellington fuselage being transported for repair.

Airfix Vintage Classics: British Infantry Support Set (1:32)

Vintage Classics: British Infantry Support Set This detailed 1:32 scale British Infantry Support Set vividly portrays the formidable ground forces of the Second World War with 75 intricately crafted pieces. As part of the Vintage Classics collection, these figures represent the fully motorised and well-armed divisions that served with honour during the war, featuring the renowned Lee-Enfield rifles, Bren guns, mortars, and 25-pounder howitzers. Key Features: 75 pieces depicting authentic British infantry support units 1:32 scale figures perfect for dioramas and military displays Vintage Classics range providing timeless modelling charm Accurately reflects the equipment and weaponry of wartime divisions Skill level 2 suitable for modellers aged 8 and above History: In the Second World War, the British Army established 43 infantry divisions, reaching a peak strength of 2.9 million personnel. In 1939, a division consisted of approximately 13,900 soldiers, increasing to 18,300 by 1944 with additional support units. These divisions were fully motorised and well-equipped with Lee-Enfield rifles, Bren guns, mortars, and 25-pounder howitzers, making them highly adaptable and effective.  

Airfix Vintage Classics: German Mountain Troops (1:32)

Vintage Classics: German Mountain Troops These 1:32 scale model kit figures vividly portray German Mountain Troops, making them an excellent addition to your military diorama, infused with the unique charm of the Vintage Classics collection. This set, comprising 49 pieces, is perfect for hobbyists aged 8 and older, showcasing troops trained for mountain warfare with lighter weaponry and extra ammunition, ensuring agility in challenging alpine environments. Key Features: 1:32 scale figures illustrating German Mountain Troops 49 pieces for detailed diorama creation Skill level 2 - suitable for modellers aged 8 years and above Part of the nostalgic Vintage Classics range Figures depict troops trained in skiing and mountain operations Lighter weapons and gear reflecting authentic mountain warfare equipment History: In regions like Norway and the Alps, German forces were adept at winter combat. These units, trained in skiing and mountain tactics, carried lighter arms and additional ammunition, boosting their mobility and stamina. Their ability to adapt made them highly successful in the demanding, high-altitude battlefields of World War Two. These figures encapsulate the spirit of these specialised mountain units, allowing hobbyists to recreate realistic scenes from some of the most demanding theatres of the Second World War. The meticulous detail in these vintage-style figures makes them ideal for both display and educational purposes, bringing historical events to life on your workbench.

Airfix Vintage Classics: Ancient Britons (1:76)

Vintage Classics: Ancient Britons  Experience the might of ancient British warriors with this engaging 1:76 scale figure set. Featuring 43 plastic components, this Vintage Classics series embodies the famed swift and aggressive tactics of tribal fighters, complete with chariots designed to instil fear in their adversaries. Key Features: 43 intricately crafted plastic pieces showcasing ancient British warriors and chariots 1:76 scale - ideal for dioramas and model kit presentations Vintage Classics design cherished by long-time Airfix enthusiasts Skill Level 1 - appropriate for ages 8 and up Illustrates the aggressive strategies and mobile warfare of ancient tribal Britain History: The warriors of ancient Britain were known for their formidable combat skills, earning a fearsome reputation across the known world. Their unique warfare style blended speed, aggression, and psychological tactics to overpower opponents. Key to their military prowess were the war chariots, lightweight and agile vehicles that enabled warriors to launch quick strikes and retreat safely. Typically, these chariots were manned by two individuals - a driver managing the horses and a warrior who would throw javelins at foes or dismount for close combat. The thunderous advance of numerous chariots, coupled with the warriors' fierce battle cries, created an intimidating spectacle intended to undermine enemy morale before the fight began. Tribal warriors fought with intense resolve to defend their territories and communities. Equipped with spears, swords, and shields, and often adorned with war paint and distinctive markings, they cut a formidable figure on the battlefield. Their deep familiarity with the local geography provided them with significant tactical advantages, enabling them to execute devastating ambushes and disappear into the landscape they knew so well. This Vintage Classics set has been a beloved choice among Airfix fans for generations, now returning to allow both seasoned modellers and newcomers to recreate these vivid scenes from Britain's ancient history. The figures serve as outstanding additions to historical dioramas, bringing dynamism and realism to 1:76 scale displays.

Airfix Vintage Classics: Robin Hood Sherwood Castle & figures (1:76)

Vintage Classics: Robin Hood Sherwood Castle & figures set  Experience the legendary battles of Sherwood Forest with this classic Airfix playset, which includes 95 pieces at a 1:76 scale. Designed in plastic and ideal for those aged 8 and up with a skill level of 1, this set vividly brings the enduring story of Robin Hood to life with intricate figures and settings. A cherished character in British folklore, Robin Hood has long inspired the working class due to his unwavering stand against tyranny and injustice, crafting his unique form of social justice by taking from the wealthy and giving to the needy. Perpetually in conflict with the oppressive Sheriff of Nottingham and his forces, Robin Hood and his band used Sherwood Forest as their refuge, often launching raids on the Sheriff's men and their fortifications, typically seizing a chest of gold or treasure during their escapades. Key Features: 95 components to construct a realistic Sherwood Forest scene 1:76 scale figures depicting Robin Hood and his famous allies Skill level 1 assembly, suitable for builders aged 8 and older Sturdy plastic build for enduring play and display Reenact historical skirmishes between Robin Hood's group and the Sheriff's troops History: Robin Hood stands as one of the most iconic characters in British folklore, symbolising defiance against oppression and a defender of the oppressed. From the heart of Sherwood Forest, this famed outlaw and his Merry Men conducted a relentless campaign against the corrupt Sheriff of Nottingham and his oppressive rule. The tales of Robin Hood have been handed down through the ages, evolving from medieval ballads into the rich stories we know today. Whether ambushing tax collectors on forest trails, sneaking into Nottingham Castle, or protecting the innocent from unjust treatment, Robin Hood's adventures represented the struggle between the common people and their feudal lords. His signature act of taking from the rich and giving to the poor elevated him from a mere outlaw to a folk hero, inspiring numerous adaptations in literature, film, and popular culture. The castle battlements, like those in this set, would have witnessed many encounters between Robin's followers and the Sheriff's soldiers, each battle adding another chapter to the legend.

Airfix Vintage Classics: Roman Fort & figures set (1:76)

Vintage Classics: Roman Fort & figures set  Part of the Vintage Classics collection, this Roman Fort and Figurines Set offers a delightful diorama experience at your workbench in a remarkable 1:76 scale. Comprising 119 intricately crafted plastic pieces, this Skill Level 1 kit is ideal for modellers aged 8 and up, providing an engaging yet straightforward assembly that replicates the fortifications that once safeguarded Roman Britain. Key Features: 119 plastic components to construct a detailed Roman fort and figurines 1:76 scale diorama set ideal for depicting scenes from Roman Britain Skill Level 1 assembly suitable for ages 8 and older Part of the Vintage Classics collection Includes fort structures and historical figurines History: Though initially viewed as invaders, the Romans significantly impacted Britain and its lifestyle, introducing law and order, infrastructure, currency, and taxation to a land that, while not as uncivilised as portrayed, gained from increased organisation and structure. Aside from the weather, the Romans appreciated Britain, transforming it into a smaller version of Rome. Before their departure, their network of forts shielded Britain from a series of overseas invaders. They left behind a legacy that continues to benefit Britain today, alongside over 400 years of captivating history.

Airfix Vintage Classics: Romans (1:76)

Vintage Classics: Romans This captivating 1:76 scale collection vividly portrays the formidable Roman Army, featuring 55 components to assemble a chariot with horses and driver, a leading centurion, a standard bearer, and legionnaires in dynamic battle stances. Enthusiasts of Airfix will recognise these classic Vintage Classics figures, which are excellent additions to any model diorama. Key Features: 55 pieces illustrating the formidable and organised Roman Army Includes a chariot complete with horses and driver Features a centurion, standard bearer, and legionnaires in varied poses 1:76 scale ideal for diorama creation Vintage Classics figures cherished by generations of hobbyists Suitable for ages 8 and above History: The Roman Army is renowned as one of the most powerful military forces in history, with its exceptional discipline and strategic prowess allowing Rome to exert control over the ancient world for centuries. Central to this military strength was the legionnaire - heavily equipped, thoroughly trained, and functioning within a strict hierarchy under the command of centurions. These leaders, identified by their transverse-crested helmets, maintained discipline and led their units into battle with steadfast authority. The standard bearer, or signifer, held a crucial role, bearing the unit's standard which acted as both a rallying point amidst the chaos of battle and a representation of the legion's honour and identity. Losing a standard in combat was seen as a severe dishonour. Roman chariots, although not used in large formations like those of the Celts and Greeks, were still important for ceremonies, victory parades, and occasionally in specific combat situations. The chariot driver needed significant skill to manage the strong horses while manoeuvring across the battlefield. This Vintage Classics set encapsulates the essence of Rome's military strength, from the individual legionnaire poised with gladius and scutum, to the command structure that made the Roman Army an indomitable force across three continents.

Airfix Westland Lysander Mk.III Special Duties (1:48)

Westland Lysander Mk.III Special Duties (1:48) Product Info: This remarkable 1:48 scale model kit of the Westland Lysander Mk.III Special Duties aircraft consists of 197 parts and provides an accurate depiction of one of the RAF's most audacious aircraft used in secret operations. Ideal for modellers aged 8 and up with intermediate skills, this kit replicates the unique alterations made to about 40 Lysander communication planes in 1941 for covert missions aiding the French Resistance. Key Features: -197 piece model kit at 1:48 scale with 316mm wingspan -Skill level 3 - suitable for intermediate modellers aged 8 years and above -Three authentic paint schemes included -Precise depiction of Special Duties modifications including external fuel tank and access ladder -World War Two era RAF aircraft -Detailed features including modified gunner's compartment with rear-sliding canopy -Represents unarmed variant configured for secret agent transport operations History: In 1941, the RAF set a requirement for the modification of around 40 Westland Lysander communication aircraft to undertake a new secretive role, termed 'Special Duties'. The aircraft were stripped of defensive weaponry and had their range extended by installing a larger internal oil tank and an external 150-gallon fuel tank beneath the fuselage. The gunner's section was altered with the addition of a rear-sliding single-piece canopy, allowing space for up to three individuals. A sturdy ladder was attached to the port-side fuselage, enabling swift boarding and disembarking for passengers during their new 'Spy Taxi' missions. Flying under the cover of night and with the assistance of the French Resistance, specialised crews courageously piloted these unarmed planes across the English Channel, transporting agents at significant personal risk to all involved. These operations were vital to the eventual success of the Second World War.  

Airfix Twin pack Typhoon FGR.4 (FMOG) & Hawker Typhoon (1:72)

Twin pack Typhoon FGR.4 (FMOG) & Hawker Typhoon (1:72) Product Info: This remarkable dual set combines two legendary RAF aircraft models in 1:72 scale, featuring the contemporary Eurofighter Typhoon FGR.4 'Moggy' alongside the historic Hawker Typhoon Mk.Ib that inspired its eye-catching D-Day tribute design. Comprising 117 parts and rated at skill level 2, this dual set is ideal for modellers aged 8 and older, enabling you to recreate both the original 1944 camouflage of No.257 (Burma) Squadron and the stunning 2024 homage on the RAF Display Team's aircraft. Key Features: -Twin pack includes both Eurofighter Typhoon FGR.4 'Moggy' and Hawker Typhoon Mk.Ib in 1:72 scale -117 pieces with skill level 2 build, perfect for modellers aged 8 years and above -Authentic schemes celebrating the 80th anniversary of D-Day -Eurofighter Typhoon features distinctive black and white D-Day identification markings -Wingspan of 153mm on completed Eurofighter model -Recreate the historic 1944 No.257 (Burma) Squadron camouflage scheme -Decals for ZJ913, the RAF Typhoon Display Team aircraft from the 2024 season History: As the nation prepared for the 80th anniversary of D-Day in summer 2024, aviation fans across Britain frequently checked the Royal Air Force Typhoon Display Team's social media for any exciting updates. Indeed, on a rainy Monday in May, the doors of a hardened aircraft shelter (HAS) at RAF Coningsby opened to unveil a stunning Eurofighter Typhoon adorned in 1944 camouflage and identification markings. The striking design on Typhoon FGR.4 ZJ913 was inspired by the RAF No.257 (Burma) Squadron Hawker Typhoon Mk.Ib, piloted by Officer Denzil Jenkins during the D-Day landings on 6th June 1944, featuring the iconic black and white identification stripes that were a hallmark of Allied aircraft over Normandy on D-Day. This was a brilliant move by the RAF PR team, and this aircraft captivated millions during the subsequent airshow season, at commemorative events in both the UK and France, and during a successful Canadian tour. Fans quickly gave this unique aircraft a nickname, and from that initial day at Coningsby, she was known as 'Moggy', a clever nod to the squadron codes she bore, using the roundel as an O. Unfortunately, this appealing aircraft only served as the RAF display Typhoon for one season, but it will be fondly remembered as one of the most beloved RAF aircraft of the post-war period. 'Moggy' can now be a standout piece on your workbench, alongside the aircraft that inspired her design, with both model kits beautifully capturing this extraordinary link between past and present. BAE SYSTEMS is a registered trade mark of BAE Systems plc.

Airfix Twin pack Typhoon FGR.4 (GINA) & Hurricane GN-A (1:72)

Twin pack Typhoon FGR.4 (GINA) & Hurricane GN-A (1:72) Product Info: This remarkable 1:72 scale dual kit unites two iconic RAF aircraft from distinct periods - the contemporary Eurofighter Typhoon FGR.4 'GINA' with its eye-catching Battle of Britain tribute livery, and the legendary Hawker Hurricane Mk.I that inspired it. Comprising 97 parts and rated at Skill Level 2, this set is ideal for modellers aged 8 and up, offering a rewarding build that honours 75 years of RAF legacy. The Typhoon features a unique paint scheme celebrating Flight Lieutenant James Brindley Nicolson's Victoria Cross-winning Hurricane from No.249 Squadron, forging a striking visual connection between the pinnacle of Fighter Command and the RAF's state-of-the-art multi-role jet. Key Features: -Dual kit featuring Eurofighter Typhoon FGR.4 'GINA' and Hawker Hurricane Mk.I -1:72 scale models with a total of 97 parts -Two genuine paint schemes celebrating Battle of Britain history -Skill Level 2 - suitable for modellers aged 8 and up -Modern RAF collection with distinctive commemorative livery -Plastic construction for detailed assembly History: As the UK prepared to commemorate the 75th anniversary of the Battle of Britain in 2015, an aircraft reveal at RAF Coningsby captivated enthusiasts and modellers alike. One of the RAF's advanced Eurofighter Typhoon FGR.4 jets was unveiled with a striking new paint job, inspired by a renowned Fighter Command aircraft from 1940. This sophisticated multi-role jet was adorned with a paint scheme reminiscent of the Hawker Hurricane Mk.I piloted by Flight Lieutenant James Brindley Nicolson on 16th August 1940, the day his valiant actions in battle earned him a Victoria Cross - the sole VC awarded to a Fighter Command pilot throughout the war. Nicolson's Hurricane from RAF No.249 Squadron caught fire after an attack by a Messerschmitt Bf 109, yet he remained in the cockpit to pursue an attack on a Bf 110 'Destroyer' that crossed his path, even as flames surrounded him. Nicolson eventually parachuted to safety and returned to flying after a period of recovery. Displaying the typically grey Eurofighter Typhoon in Battle of Britain era camouflage was a brilliant move by the RAF, and during the summer display season, it became the most admired aircraft in the Royal Air Force fleet. Enthusiasts affectionately named it 'GINA', after the fuselage code letters, and it remains one of the most visually appealing Typhoon jets in RAF history. Now you can construct 'GINA' and the aircraft that inspired its design in 1:72 scale, offering endless modelling enjoyment. BAE SYSTEMS is a registered trade mark of BAE Systems plc.

Airfix Vintage Classics: Shorts Skyvan (1:72)

Vintage Classics: Shorts Skyvan  This 1:72 scale model kit of the Short SC.7 Skyvan is a wonderful addition to our Vintage Classics collection. It includes 152 parts and is rated at Skill Level 3, featuring a wingspan of 275mm. The Short SC.7 Skyvan, a British twin-turboprop transport aircraft, made its maiden flight in 1963 and was designed to be straightforward and economical to operate. Manufactured until 1986, approximately 150 units were produced, with the Skyvan 3 being the most prevalent version. It was utilised globally, including by Argentina during the Falklands War, and was priced at around $650,000 in 1972. Key Features: 1:72 scale plastic model kit with 152 components Skill Level 3 build suitable for ages 8 and above Wingspan of 275mm upon completion Comes with 2 authentic paint schemes Part of the Vintage Classics range Detailed depiction of the British twin-turboprop transport aircraft History: The Short SC.7 Skyvan was a unique British twin-turboprop transport aircraft that first flew in 1963. It was conceived as a robust, practical aircraft, prioritising simplicity and cost-effectiveness, making it appealing to both commercial and military operators. Production continued until 1986, with around 150 aircraft constructed. The Skyvan 3 variant became the most widespread, offering enhancements over earlier versions and setting the standard for production. This aircraft was deployed worldwide, fulfilling various roles from cargo to passenger transport. Its adaptability and dependability led to its widespread use, with operators valuing its ability to function from short, unprepared runways. During the Falklands War, Argentina utilised Skyvans for military transport, showcasing its operational versatility under challenging conditions. In 1972, the aircraft was available for approximately $650,000, offering excellent value for its capabilities. The Skyvan's boxy, functional design earned it several affectionate nicknames, but its practical design focused on utility, featuring a spacious cargo area and rear loading ramp for quick loading and unloading.

Airfix Swedish Air Force 100th Anniversary set (5 aircraft) (1:72)

Swedish Air Force 100th Anniversary set (5 aircraft) (1:72) Product Info: Commemorating 100 years since the Swedish Air Force's inception, this detailed 1:72 scale model set illustrates the impressive transformation of one of the globe's leading air forces. With 287 components, a skill level 2 build, and five unique livery options, this collection honours Sweden's progression from acquiring foreign aircraft to creating groundbreaking domestic designs. The set includes planes from various stages of Swedish aviation history, featuring the iconic SAAB J35 Draken, a supersonic interceptor that redefined jet fighter capabilities. Key Features: -287 components featuring multiple aircraft, celebrating a century of Swedish Air Force legacy -1:72 scale models designed for ages 8 and up -Skill level 2 construction ideal for intermediate builders -Five genuine livery options depicting different periods of Swedish aviation -Includes legendary aircraft like the pioneering SAAB J35 Draken supersonic interceptor -Plastic models with intricate parts showcasing Swedish aircraft engineering mastery History: At the onset of World War II, the Swedish Air Force comprised 180 aircraft of various models, primarily sourced from nations such as Britain, the US, Germany, and Italy. The first locally designed aircraft emerged in 1942, yet to maintain neutrality, Sweden continued to bolster its fleet with foreign-made planes. This trend persisted into the jet era, although Sweden was actively developing its own jet fighters. The most notable of these was the SAAB J35 Draken, a supersonic interceptor that was truly exceptional. Since that time, Sweden has consistently produced remarkable new aircraft, frequently operating them from dispersed locations using public roads as makeshift runways, where SAAB cars and fighters shared the same paths. This commemorative set enables you to admire the ingenuity of these aircraft from your workbench, celebrating a century of Swedish aviation innovation and excellence. Produced under licence. (Vehicle/Aeroplane Models) the distinctive logos, product markings, and trade dress are all trademarks of The Boeing Company. BAE SYSTEMS is a registered trade mark of BAE Systems plc.

Airfix Twin pack Typhoon FGR.4 (Blackjack) & Tucano T.1 (1:72)

Twin pack Typhoon FGR.4 (Blackjack) & Tucano T.1 (Linton)(1:72) Product Info: This 1:72 scale twin pack features two of the RAF's most iconic display aircraft: the Eurofighter Typhoon FGR.4 'Blackjack' and the Shorts Tucano T.1. Both models showcase bold all-black Aggressor designs with union flag inspired markings and RAF roundels on their tails. Comprising 91 pieces across both kits and rated at skill level 2, this set is perfect for modellers looking to enhance their skills. Key Features: -Twin pack including both Typhoon FGR.4 'Blackjack' and Shorts Tucano T.1 display aircraft -Both aircraft sport unique black schemes with red, white, and blue accents -91 pieces in total across both models -Skill level 2 - suitable for advancing modellers -1:72 scale models appropriate for ages 8 and up -Includes two genuine RAF display aircraft schemes History: Among the specially decorated RAF Typhoon FGR.4 display aircraft over the last decade, ZJ914 was the most enduring on the UK airshow scene and the most patriotic in design. Dressed in a sleek all-black Aggressor scheme, it also featured union flag inspired markings and an RAF roundel on each side of its tail. Regardless of the weather, when this aircraft performed with afterburners lit, it was a spectacle to witness. This scheme was reminiscent of the one used by the RAF Shorts Tucano T.1 display in 2008, which also had a black airframe with red, white, and blue accents to commemorate the 90th anniversary of the Royal Air Force. Two Tucanos were adorned in this style: ZF210 and ZE338, with one acting as a backup should the primary display aircraft be unavailable. The Tucano served as the RAF's basic training aircraft for three decades until its retirement in 2019. Continuing a now well-loved tradition, Typhoon ZJ914 was affectionately nicknamed 'Blackjack' by enthusiasts. The aircraft sported this admired scheme for three complete display seasons and even during the early months of preparation for the 2024 airshow season. Is it any surprise that 'Blackjack' became one of the most beloved aircraft to represent the Royal Air Force in the 21st century? 'Blackjack' and the aircraft that inspired its appearance are now both available to construct in 1:72 scale - an excellent project for modellers beginning to gain confidence in this hobby. BAE SYSTEMS is a registered trade mark of BAE Systems plc.

Airfix Legends D Bader triple pack (Bulldog/Hurricane/Spitfire) (1:48)

Legends D Bader triple pack (Bulldog/Hurricane/Spitfire) (1:48) Product Info: This remarkable Legends triple pack honours the bravery and resolve of Britain's renowned fighter pilot, Douglas Bader, featuring three intricately designed 1:48 scale aircraft kits. Comprising 414 pieces in total, this commemorative set includes the Gloster Gladiator, Bristol Bulldog, and Supermarine Spitfire - the aircraft that marked Bader's distinguished career from his beginnings at Cranwell to leading the victory flypast over London at the war's conclusion.   Key Features: -Three complete 1:48 scale aircraft kits celebrating Douglas Bader's legendary service -414 pieces in total offering a captivating building experience -Skill level 3 suitable for modellers aged 8 years and older -Includes the Bristol Bulldog, the aircraft that defined Bader as an airman -Features aircraft from his early RAF service to his wartime achievements -High-quality plastic construction with precise detailing -Single comprehensive paint scheme to ensure historical accuracy History: When Britain faced the formidable German war machine alone, heroes were needed to inspire the nation - individuals like Douglas Bader. Bader joined the Royal Air Force in 1928, known for his athletic prowess and thrill-seeking nature, although he found the academic demands at Cranwell challenging. Commissioned in July 1930, he was assigned to No.23 Squadron at Kenley, flying the Gloster Gladiator and later the Bristol Bulldog, one of the era's most advanced fighter planes. Although Bader's wartime achievements and aerial victories are associated with both the Spitfire and Hurricane, it was the Bulldog biplane that truly defined his early career. During an unplanned visit to the Reading Aero Club on 14th December 1931, despite being expressly forbidden from performing low altitude aerobatics in the Bulldog, Bader disregarded these orders after being provoked by fellow aviators. Executing a series of impressive manoeuvres, his aircraft, flying just above the ground, clipped the earth with its wingtip during a slow roll, causing it to cartwheel across the field, resulting in severe injuries to Bader, much to the onlookers' horror. Despite losing both legs, Bader was resolute in his desire to return to the Royal Air Force, and with the onset of the Second World War, he was given the opportunity. He flew both the Spitfire and Hurricane in combat, achieving 22 aerial victories before being forced to eject from his Spitfire over France, becoming a prisoner of war on 9th August 1941. Douglas Bader's tale of bravery and perseverance inspired Britain during its darkest times, and when the victory flypast occurred over London at the war's end, it was Bader who led the formation in a Spitfire. BAE SYSTEMS is a registered trade mark of BAE Systems plc.

Scalextric Toyota Celica GTFour Didier Auriol 1995 WRC

Toyota Celica GTFour Didier Auriol 1995 WRC   Includes: - DPR - High Detail - Magnatraction - Front Lights - Rear Lights - Compatible with ARC AIR/ARC ONE - Compatible with ARC PRO/Digital (Chip Required) - Compatible with Spark Plug - Easy Change Guide Blade - 1:32 Scale   Vehicle information:   This model brings back one of the most recognisable machines of the ’90s rally era.    Auriol’s Castrol-liveried Celica GT-Four is instantly familiar, and the Scalextric version highlights all the big details: the bold green and red graphics, the deep-set driving lamps, and the purposeful stance that made the ST205 such a fan favourite.    On the track, it’s built for tight, controlled stages with smooth handling and plenty of grip. It's a great choice for anyone who loves classic WRC machinery or wants a striking addition to a rally grid.    Featuring real, working four-wheel-drive, this model is a great addition to your Scalextric rally stage!

Scalextric Toyota Celica GTFour Freddy Loix

Toyota Celica GTFour Freddy Loix   Includes: - DPR - High Detail - Magnatraction - Front Lights - Rear Lights - Compatible with ARC AIR/ARC ONE - Compatible with ARC PRO/Digital (Chip Required) - Compatible with Spark Plug - Easy Change Guide Blade - 1:32 Scale   Vehicle information:   This 1997 Ypres Rally Celica GT-Four brings one of the most recognisable Marlboro-era liveries to the Scalextric range.  The real car, driven by Freddy Loix and Sven Smeets, was a tough and competitive entry in a golden period of late-90s rallying, and the model reflects that attitude with its bold red-and-white scheme, detailed sponsor set and purposeful stance.  On the track, the Celica feels planted and responsive, helped by working lights and a smooth, dependable drivetrain. It’s a great match for other late-Group A machinery, offering close, aggressive racing and plenty of visual drama as it powers through tight stages.  Fans of period rally cars will appreciate the accuracy of the bodywork, the clean finish and the faithful recreation of Loix’s distinctive event livery.  A strong addition for collectors and a fun, lively pick for anyone running a rally-themed layout. Featuring real working four-wheel drive this model is a great addition to your Scalextric rally stage!

Scalextric Volkswagen Golf MK1 GTI- Black

Volkswagen Golf MK1 GTI- Black Includes: - DPR - High Detail - Magnatraction - Front Lights - Rear Lights - Compatible with ARC AIR/ARC ONE - Compatible with ARC PRO/Digital (Chip Required) - Compatible with Spark Plug - Easy Change Guide Blade - 1:32 Scale   Vehicle information: The original Golf GTI set the template for the hot hatch, and, in solid black, it has a purposeful, understated look that suits it perfectly.  Clean lines, compact proportions, and that classic GTI stance makes it a favourite among enthusiasts even today.  This version keeps things simple and sharp, echoing the road-going style that made the Mk1 such a legend.  Scaled down for the slot track, the model carries the black finish and subtle detailing of the real car, right down to its period wheels and trim.  It’s an ideal addition for anyone who enjoys iconic street cars, early hot hatches, or timeless 1980s design.  

Scalextric Macau Guia Race Twin Pack

Macau Guia Race Twin Pack Includes: - DPR - High Detail - Magnatraction - Front Lights - Rear Lights - Compatible with ARC AIR/ARC ONE - Compatible with ARC PRO/Digital (Chip Required) - Compatible with Spark Plug - Easy Change Guide Blade - 1:32 Scale   Pack information: This special twin pack brings together two stars of the Macau Guia Race, presented in a dedicated display box that celebrates one of the world’s most demanding touring car circuits.  The BMW E30 M3 driven by Emanuele Pirro and the Ford Sierra RS500 campaigned by Tim Harvey form a striking pairing — two iconic Group A machines known for their speed, balance and fierce rivalry in period.  Each car carries its distinctive white, yellow and green livery, reflecting the look seen in international touring competition of the era. In 1:32 scale, both models highlight the contrasting personalities of these legends: the rev-happy precision of the M3 and the turbocharged punch of the RS500.  For collectors, it’s an ideal set — two classic racers, one famous venue and a presentation box for that special finish.  

Scalextric James Bond Checker Taxi Cab - Live And Let Die

James Bond Checker Taxi Cab - Live And Let Die   Includes:   - DPR - High Detail - Magnatraction - Front Lights - Rear Lights - Digital plug - Compatible with ARC AIR/ARC ONE - Compatible with ARC PRO/Digital - Compatible with Spark Plug - Easy Change Guide Blade - 1:32 Scale Vehicle information:   The bright yellow New York taxi from Live and Let Die adds a fun twist to the world of James Bond vehicles.    While not a glamorous spy car, the classic Checker-style cab became part of one of the film’s most memorable chase sequences as Bond is trailed through the busy streets of Manhattan.    Its boxy shape, wide grille, and practical, hard-working design made it a familiar sight on 1970s city roads, and its appearance in the movie helped ground the action in a lively, real-world setting.    This Scalextric model recreates the taxi’s look with clean detailing, from the front bumper guards to the roof-mounted taxi sign.    It’s an unexpected but charming addition for Bond fans, film-car collectors, and anyone who enjoys the character and nostalgia of classic American city machines.  

Scalextric Ford RS Road Collection Triple Pack

Ford RS Road Collection Triple Pack Includes: - DPR - High Detail - Magnatraction - Front Lights - Rear Lights - Compatible with ARC AIR/ARC ONE - Compatible with ARC PRO/Digital (Chip Required) - Compatible with Spark Plug - Easy Change Guide Blade - 1:32 Scale   Pack information: This triple pack brings together three icons from Ford’s legendary RS family: the Sierra RS Cosworth in Moonstone Blue, the Sierra Sapphire Cosworth in Flint Grey, and the Escort RS Cosworth in Jewel Violet.  Each one represents a milestone in Ford’s performance story, from the wild, turbocharged 80s through to the road-going rally hero of the 90s. Presented in a dedicated display box, the set celebrates the distinctive character of all three cars.  The Moonstone Blue Sierra carries that unmistakable wide-arched stance, the Sapphire brings a more refined but purposeful saloon profile, and the Jewel Violet Escort shows off its dramatic rear wing and compact, rally-bred proportions.  For collectors of fast Fords, this is a rare chance to enjoy the full spread of RS road machinery in one curated box — three classics, each finished in a colour that has become part of its identity.  

Scalextric Batmobile Ultimate Collection Triple Pack

Batmobile Ultimate Collection Triple Pack Includes: - DPR - High Detail - Magnatraction - Front Lights - Rear Lights - Compatible with ARC AIR/ARC ONE - Compatible with ARC PRO/Digital (Chip Required) - Compatible with Spark Plug - Easy Change Guide Blade - 1:32 Scale Vehicle information: For fans of the Dark Knight, the Scalextric Batman Triple Pack offers an extraordinary collection that celebrates Batman’s iconic vehicle, the Batmobile.  A crucial asset to Batman’s crime-fighting arsenal, the Batmobile has undergone numerous transformations over the decades, each reflecting the era’s unique style and technological advancements.  This is a limited edition set of only 2000 units. It features a unique chrome Scalextric collection never seen before, showcasing highly detailed replicas of three legendary Batmobiles.  Perfect for collectors and enthusiasts alike, this pack is a must-have for any Batman fan.    

Scalextric Fast and Furious - 25 Years - Supra vs R34

Scalextric Fast and Furious - 25 Years - Supra vs R34

Tamiya US Infantry Weapons Set (1:35)

Tamiya - US Infantry Weapons Set Military Miniatures - 1:35 Scale

Tamiya U.S. Gun and Mortar Team (1:35)

U.S. Gun and Mortar Team (1:35) This is a 1/35 scale plastic model assembly kit depicting a WWII U.S. gun and mortar team. The set features no fewer than eight figures in highly authentic action pose. Detailed depictions of radio equipment, ammo cases and more make for a convincing final product.

Scenecraft 6ft Inset Walls and Pillars (OO)

6ft Inset Walls and Pillars (OO)

Rapido UK SDJR 'Evolution' 48ft Non-Corridor Composite, No.21

SDJR 'Evolution' 48ft Non-Corridor Composite, No.21 ‘Evolution’ 48’ non-corridor bogie coaches Somerset and Dorset Joint Railway Livery Composite No.21 Tooling and Detail features: Elliptical roofs Gas lighting Footboards on all bogies Lower underframe mounted footboard Fox pattern bogies Full internal and external detail Working lighting NEM coupling pockets with kinematic coupling mechanism Optional ‘vacuum pipe’ close coupling bar - OO Scale  

Rapido UK SDJR 'Evolution' 48ft Non-Corridor Third, No.73

SDJR 'Evolution' 48ft Non-Corridor Third, No.73 ‘Evolution’ 48’ non-corridor bogie coaches Somerset and Dorset Joint Railway Livery Third No.73 Tooling and Detail features: Elliptical roofs Gas lighting Footboards on all bogies Lower underframe mounted footboard Fox pattern bogies Full internal and external detail Working lighting NEM coupling pockets with kinematic coupling mechanism Optional ‘vacuum pipe’ close coupling bar - OO Scale  

ProArte Tri-Grip Detailer Brush Pack (8 brushes)

Tri-Grip Detailer Brush Pack (8 brushes) Contains the following brush sizes: 3/0, 2/0, 10/0, 1, 2, 4/0, 5/0, 0

ProArte Prolon Brush Pack (9 brushes)

ProArte Brush Pack (9 brushes) contains Following Brush Sizes: 1/8, 3/16, 1/4, 6, 4, 2, 0, 3/0, 5/0 

ProArte Prolon Miniature Set (7 Brushes)

Prolon Miniature Set (7 Brushes)   Contains the following brush sizes: 0, 2/0, 3/0, 4/0, 5/0, 10/0, 20/0.

ProArte All Media & Micro Detail Brush Pack (8 brushes)

All Media & Micro Detail Brush Pack (8 brushes) Contains the following brush sizes: Mirco detail brush (4 brushes) :  10/0, 5/0, 3/0, 0 All media brush (4 brushes): 10/0, 5/0, 3/0, 0

CADA Dinosaur Eggs w/Stegosaurus, Triceratops & Velociraptor

Tray of 3 Dinosaur Eggs contaning  Stegosaurus, Triceratops & Velociraptor  Part of CaDA Brick's Creative Series, this item is a set of three self-build brick model dinosaur skeletons ideal for those wanting to recreate multiple museum pieces in their own home. The Stegosaurus is made up of 297 pieces, the Triceratops made up of 272 pieces, and the Velociraptor made up of 256 pieces, with all the dinosaur bones being made of special luminous material so they will glow in the dark! Each model has movable joints, allowing the dinosaurs' posture to be changed and moved as desired.   Another special feature of the model is that instead of building three individual dinosaurs, it is possible to create an even bigger Tyrannosaurus Rex with the supplied pieces! Whether building as a single dinosaur or as a set, these dinosaurs are great for play and display.   Model Information    - Model number C59015W - "Dinosaur Fossils: Stegosaurus, Triceratops & Velociraptor"  - Detailed replica brick model of a dinosaur skeleton  - Number of pieces: 825 pieces in total with "simple" rated difficulty  - Suitable for ages 8+ years  - Model dimensions: 27.2cm length, 9.6cm width, 14.4cm height (average for each dinosaur)  - Box dimensions: 54cm length, 20.3cm width, 20cm height  - The dinosaur bones are luminous and will glow in the dark  - The combined T Rex instruction manual is only available in electronic format; find the QR code on the back of the build manual

Hornby Railroad: Lumo Class 803 842001 Coach

Railroad: Lumo Class 803 842001 Coach Lumo are an open-access operator owned by FirstGroup, running train services between London King’s Cross and Edinburgh Waverley using a fleet of Hitachi AT300 Class 803 electric multiple units. Five sets are currently operated, each of five cars, with a single class of accommodation throughout. This OO gauge RailRoad Lumo coach model is a detailed, durable way to bring this design to life on your model railway layout. Additional model coaches are available to create realistic five-coach formations. - OO Scale

Hornby Railroad: Lumo Class 803 843001 Coach

Railroad: Lumo Class 803 843001 Coach Lumo are an open-access operator owned by FirstGroup, running train services between London King’s Cross and Edinburgh Waverley using a fleet of Hitachi AT300 Class 803 electric multiple units. Five sets are currently operated, each of five cars, with a single class of accommodation throughout. This OO gauge RailRoad Lumo coach model offers a durable, detailed way to bring the design to life on your model railway layout. Additional model coaches are available to create realistic five-coach formations. - OO Scale

Hornby Railroad: Lumo Class 803 844001 Coach

Railroad: Lumo Class 803 844001 Coach Lumo are an open-access operator owned by FirstGroup, running train services between London King’s Cross and Edinburgh Waverley using a fleet of Hitachi AT300 Class 803 electric multiple units. Five sets are currently operated, each of five cars, with a single class of accommodation throughout. This OO gauge RailRoad Lumo Coach model offers a durable, detailed way to bring this design to life on your model railway layout. Additional model coaches are available to create realistic five-coach formations. - OO Scale

Hornby Railroad: BR Mk3 TGS 44086 GWR

Railroad: BR Mk3 TGS 44086 GWR British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, initially they were intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. GWR-liveried Mk3 coaches were formed into full-length HST sets and from 2019, in sets of four, to operate as GWR ‘Castle’ sets, which ran as such until May 2024. This RailRoad coach model represents a Trailer Guard Standard coach in GWR livery. - OO Scale

Scalextric Ford Sierra RS500 - YTCC 2024 - Dan Brown

Ford Sierra RS500 - YTCC 2024 - Dan Brown Includes: -DPR -High Detail -Magnatraction -Front Lights -Rear Lights - 1:32 Scale Vehicle information: The Ford Sierra RS500 remains one of the most dominant touring cars ever built, and its legacy continues today in historic and classic racing. Dan Brown’s #85 Sierra, competing in the 2023 Youngtimer Touring Car Challenge, brings that Group A thunder into the modern era.  With its white and yellow Brown & Geeson livery and aggressive aero package, the car echoes the look and attitude of the late '80s RS500s, benefiting from contemporary preparation and set up.  The result is a machine that’s as exciting to watch now as it was in period. This Scalextric model recreates the 2023 YTCC entry with accurate colours, race decals, and the distinctive stance of the RS500.  Ideal for fans of Group A legends, historic touring cars, and collectors who love seeing iconic machinery still racing hard today.

Peco Catalogue (Edition 9 - 2026)

Peco Catalogue 2026 The PECO Product & Modelling Guide is out now and bigger than ever! Updated and expanded to 240 pages (last one was 224 pages) - that's an extra 16 pages-  full of essential information. It is not only a comprehensive guide to a huge range of PECO products and other brands, but also a modelling reference guide, to help with so many modelling techniques. Covering the PECO, Ratio, Wills, Parkside and Modelscene ranges, as well as the publications and Tracksetta templates. Products from the new TT:120 scale are included, as is the expanding Pecoscene Static Grass range and N gauge wagon range.  Explanations and helpful hints and tips on scales and gauges, rail codes, frog descriptions, standard and narrow gauge railways, baseboard building, track-laying, wiring using PECO turnout motors and Smartswitch servos, to operate turnouts and semaphore signals, kit building and painting, and scenic work are all included in this inspirational guide.      

Hornby BR Mk3 TS 42175 Virgin West Coast

BR Mk3 TS 42175 Virgin West Coast British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby BR Mk3 TF 41045 Virgin West Coast

BR Mk3 TF 41045 Virgin West Coast  British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby BR Mk3 TGS 44081 Virgin West Coast

BR Mk3 TGS 44081 Virgin West Coast  British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby BR Mk3 TRSB 40437 Virgin West Coast

BR Mk3 TRSB 40437 Virgin West Coast British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby Tavern Coach Pack 'At the Sign of the Three Plovers'

BR Kitchen and Buttery Car & Composite Restaurant 'At the Sign of the Three Plovers' Coach Pack  This highly detailed OO gauge model coach pack represents one of eight pairs of vehicles introduced by BR in 1949 to provide catering facilities with a difference.  The idea came from Oliver Bulleid, the former Southern Railway’s Chief Mechanical Engineer. This pair operated on the Eastern Region and consisted of a Composite Dining Car and a ‘Tavern Coach’. Internally, each ‘tavern’ was decorated to mimic an olde English pub, with tiled floor, whitewashed walls, ‘oak’ beams, high-backed settles and illuminated by ‘lanterns’. - OO Scale

Hornby BR Mk3 Virgin West Coast 4 Car Coach Pack

BR Mk3 Virgin West Coast 4 Car Coach Pack  Includes: Trailer Standard 42176 Trailer Standard 42177 Trailer Standard 42105 Trailer First 41059 British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby Railroad: GWR County 1013 'County of Dorset' BR Lined Green

Railroad: GWR County 1013 'County of Dorset' BR Lined Green  The ‘County’ Class was the last of the GWR-designed two-cylinder 4-6-0s, with 30 built at Swindon between 1945 and 1947 to the design of Chief Mechanical Engineer, Frederick Hawksworth.  ‘County of Dorset’ entered service in February 1946 and spent most of its early years in the West Country at Bristol, Plymouth, Truro and Penzance, before transferring to Shrewsbury in December 1951. Its final move was to Swindon in September 1963, from where it was withdrawn in July the following year and scrapped at Cashmore’s yard in Newport, South Wales.  Our OO gauge RailRoad replica model locomotive is a detailed, yet durable, version of the Country Class, bringing the 'County of Dorset' to your model railway collection. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER 'West Riding Limited' Double Open First Pack

LNER 'West Riding Limited' Double Open First Pack Following the success of the LNER’s newly-introduced ‘Coronation’ trains in 1935, a new train was introduced to operate between London King’s Cross and Leeds and Bradford in 1937. A new set of carriages was built that was identical to the ‘Coronation’ with four twin articulated coaches, though not the streamlined beavertail observation car, named the ‘West Riding Limited’. Carriages were in pairs, sharing a bogie between the two, thus reducing friction and improving ride quality. The train first ran on 27th September 1937 and achieved an average speed of 63.3mph (101.9km/h) between King’s Cross and Bradford. It was hauled by Gresley's ‘A4’ No. 4492 ‘Dominion of New Zealand’, which had emerged from Doncaster Works only three months earlier. Services were suspended for the duration of the Second World War, but were reinstated in 1949. A modern version of the train is still operated by the present-day LNER with a 6.30am departure from Bradford Forster Square station. The next vehicles in the rake are coaches ‘C’ and ‘D’ and these comprise of two identical first class open coaches which offered enhanced comfort and also had a lavatory at each end. Those coaches are the ones presented in this highly detailed OO gauge coach pack. - OO Scale

Hornby LNER 'West Riding Limited' Open Third & Brake Third Pack

LNER 'West Riding Limited' Open Third & Brake Third Pack Following the success of the LNER’s newly-introduced ‘Coronation’ trains in 1935, a new train was introduced to operate between London King’s Cross and Leeds and Bradford in 1937. A new set of carriages was built that was identical to the ‘Coronation’ with four twin articulated coaches, though not the streamlined beavertail observation car, named the ‘West Riding Limited’. Carriages were in pairs, sharing a bogie between the two, thus reducing friction and improving ride quality. The train first ran on 27th September 1937 and achieved an average speed of 63.3mph (101.9km/h) between King’s Cross and Bradford. It was hauled by Gresley's ‘A4’ No. 4492 ‘Dominion of New Zealand’, which had emerged from Doncaster Works only three months earlier. Services were suspended for the duration of the Second World War, but were reinstated in 1949. A modern version of the train is still operated by the present-day LNER with a 6.30am departure from Bradford Forster Square station. The final pair are made up of an open third class coach with lavatory, plus another third class brake coach with alternative accommodation for the train’s guard, and those are the highly detailed OO gauge model coaches shown in this pack. - OO Scale

Hornby LNER 'West Riding Limited' Open Third & Kitchen Third Pack

LNER 'West Riding Limited' Open Third & Kitchen Third Pack Following the success of the LNER’s newly-introduced ‘Coronation’ trains in 1935, a new train was introduced to operate between London King’s Cross, Leeds and Bradford in 1937. A new set of carriages was built that was identical to the ‘Coronation’ with four twin articulated coaches, though not the streamlined beavertail observation car, and was named the ‘West Riding Limited’. Carriages were in pairs, sharing a bogie between the two, thus reducing friction and improving ride quality. The train first ran on 27th September 1937 and achieved an average speed of 63.3mph (101.9km/h) between King’s Cross and Bradford. It was hauled by Gresley's ‘A4’ No. 4492 ‘Dominion of New Zealand’, which had emerged from Doncaster Works only three months earlier. Services were suspended for the duration of the Second World War, but were reinstated in 1949. A modern version of the train is still operated by the present-day LNER with a 6.30am departure from Bradford Forster Square station. Vehicles ‘E’ and ‘F’ include a Third Class Open Coach and a another coach with third class seating and a second kitchen area. These highly detailed OO gauge LNER coaches are excellent replicas of the 'West Riding Limited' carriages.  - OO Scale

Hornby Railroad: Class 395 395005 Southeastern High Speed Train Pack

Railroad: Class 395 395005 Southeastern High Speed Train Pack Known as ‘Javelins’, these Class 395 trains are dual-voltage EMUs built as part of the Hitachi ‘AT300’ family for high-speed commuter services operated by Southeastern.  Introduced from June 2009, they are typically formed of six cars, though they can quickly be coupled together to form 12-cars when required. Based at Ashford and Ramsgate, there are currently 29 six-car sets in service. They can be found on services on High Speed 1, the North Kent Line, South Eastern Main Line, Chatham and Kent Coast lines, and the Ashford-Ramsgate line.  Our RailRoad model Train Pack brings the magic of the 'Javelins' to life on your OO gauge layout. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 803 803001 Lumo Train Pack

Railroad: Class 803 803001 Lumo Train Pack  Lumo are an open-access operator owned by FirstGroup running train services between London King’s Cross and Edinburgh Waverley using a fleet of Hitachi AT300 Class 803 electric multiple units.  Five sets are currently operated, each of five cars, with a single class of accommodation throughout. Built in 2020/1 and based on the successful Class 800 IEP ‘Azuma’ design, these units don’t have auxiliary diesel engines, but instead carry batteries intended to power on-board facilities in case of overhead power failure. In December 2024, FirstGroup announced that it was acquiring a further 14 of the five car units for its expanding operations.  This RailRoad model Train Pack brings the Lumo Class 800 to life on your layout. - DCC Ready 21-Pin Socket - OO Scale

Hornby Class 802/3 802301 'Amy Johnson' Hull Trains Pack

Class 802/3 802301 'Amy Johnson' Hull Trains Pack  In 2019, Hull Trains launched a poll to find suggestions for naming its five Class 802-3 ‘Paragon’ trains.  As a result, set 802301 was named ‘Amy Johnson’ after the Hull-born pioneering pilot who became the first woman to fly solo between London and Australia in the 1930s, setting many long-distance flying records. This unit was the first of Hull Trains’ Class 802-3 bi-mode units, entering service on 25th November 2019. The five 5-car sets work express services between Hull and London King’s Cross. Our OO model Train Pack is a fantastic replica of this modern design, with HM7000 capability if you add a 21-pin decoder (sold separately). - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST EMR 43274 & Intercity Swallow 43102 Pack

BR Class 43 HST EMR 43274 & Intercity Swallow 43102 Pack  This hybrid train pack represents the final months of HST operation with East Midland Railway in 2021, when 43274 became the first and only Class 43 to carry the interim EMR purple aubergine livery. Owned by Colas, it is still in service today. Meanwhile, 43102 was turned out in retro InterCity ‘Swallow’ livery in February 2021, recalling its record-setting feat with 43159, when they became the world’s fastest diesel locomotives attaining a speed of 148.5mph in November 1987. Withdrawn in May 2021, it is now part of the National Collection and on display at Shildon.  Our models feature NEM tension lock couplings, with the EMR locomotive sporting a stylish purple livery and the Intercity train painted in the iconic grey and white colours. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack

BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack This Virgin Class 43 HST 'Lady in Red' train pack brings the vibrant red and black livery to your model railway layout, creating quite an impression as it moves around the tracks. This OO gauge locomotive model has NEM tension lock couplings and a 21-pin socket, so you can upgrade to HM7000 control when you are ready.  Virgin Trains won both the InterCity West Coast and InterCity CrossCountry franchises following privatisation of BR, commencing services under its Virgin branding in 1997. It inherited a variety of locomotives and rolling stock from BR, including InterCity 125 HST sets.  Class 43 power car 43093 had been named ‘York Festival 88’ under BR, but was renamed ‘Lady in Red’ in 1997, which it carried until 2003, while 43097 had been called ‘The Light Infantry’ until 1990, but entered service with Virgin CrossCountry without a name. Painted in the company’s red and black livery, with white markings, both later became part of First Great Western’s HST fleet. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST Virgin West Coast Train Pack (Sound Fitted)

BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack (Sound Fitted) This Virgin Class 43 HST "Lady in Red' Train Pack brings the bold red branding of Virgin to your model railway layout, ensuring an eye-catching visual as it charges round the track. This OO model locomotive pack features NEM tension lock couplings and is ready-fited with HM7000 sound control, giving you a digital model railway experience.  Virgin Trains won both the InterCity West Coast and InterCity CrossCountry franchises following privatisation of BR, commencing services under its Virgin branding in 1997. It inherited a variety of locomotives and rolling stock from BR, including InterCity 125 HST sets.  Class 43 power car 43093 had been named ‘York Festival 88’ under BR, but was renamed ‘Lady in Red’ in 1997, which it carried until 2003, while 43097 had been called ‘The Light Infantry’ until 1990, but entered service with Virgin CrossCountry without a name. Painted in the company’s red and black livery, with white markings, both later became part of First Great Western’s HST fleet. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: GNR N2 1606 GNR Lined Green

Railroad: GNR N2 1606 GNR Lined Green Introduced to a design by Nigel Gresley for the Great Northern Railway in 1920, 1744 was built by the North British Locomotive Company in Glasgow in February 1921. At the Grouping two years later, it became LNER 4744 and then 9523 under the 1946 renumbering scheme, before finally becoming BR 69523 at nationalisation. Withdrawn from New England shed, Peterborough in September 1962, it was purchased by the Gresley Society Trust for preservation the following year. It has been based variously at the Keighley & Worth Valley Railway, the Great Central Railway and – most recently – the North Norfolk Railway, where, following a major overhaul, it is set to return to steam in time to celebrate ‘Gresley 150’ during 2026. - OO Scale

Hornby LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition)

LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition) (150th Anniversary Collection) The LNER Class A4 Sir Nigel Gresley model locomotive is a limited edition model and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Gresley's birth, and this locomotive includes a figure.  With a shiny new blue livery and NEM tension lock couplings, this steam locomotive is a wonderful collector's piece.  Entering service with the LNER as 4498 in Garter blue with streamlined side-skirting and red wheels, this was the 100th Gresley ‘Pacific’ to be built when it emerged from Doncaster Works in October 1937. Allocated to King’s Cross ‘Top Shed’ and used on front-line express services such as the prestigious ‘Coronation’ between London and Edinburgh, ‘SNG’ was built with a single chimney and had stainless steel numbers and letters for the tender added at a general overhaul in January 1939.  After a period in wartime black, when the side-skirts were permanently removed, the locomotive returned to lined Garter blue in March 1947. Painted into BR’s express passenger blue in September 1950, as 60007, it set a post-war steam record speed of 112mph on 23 May 1959. Withdrawn in February 1966, by now in BR green, it was saved for preservation by the A4 Locomotive Society. - DCC Ready 21-Pin Socket - OO Scale

Hornby LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition)

LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition) (150th Anniversary Collection) The LMS Streamlined 'Coronation' model locomotive is a limited edition item and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Stanier's birth, and this locomotive includes a figure. With a shiny bold red livery and NEM tension lock couplings, this steam locomotive is a must-have for collectors. The ‘Princess Coronation’ Class, also known as the ‘Duchess’ Class, was an enlarged and improved version of William Stanier’s successful ‘Princess Royal’ Class ‘Pacific’. The first ten class members emerged from Crewe Works in a streamlined form during 1937 and five of these were put aside specifically for hauling the prestigious ‘Coronation Scot’ between London Euston and Glasgow Central. These were painted in Caledonian blue and had silver horizontal lining, which matched the carriages they pulled. No. 6220 set a new British steam speed record of 114mph in 1937, but this was beaten by the LNER’s ‘Mallard’ in 1938. Built with a single chimney, 6220 was the last of the original 15 to be fitted with a double blast pipe and chimney in 1944. The locomotive’s streamlined casing was removed in November 1946, and it finished its career in its rebuilt form with smoke deflectors as BR’s 46220 in April 1963. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 56 56047 Dutch Transrail (TXS Sound Fitted)

BR Class 56 56047 Dutch Transrail (TXS Sound Fitted) This Transrail Class 56 OO gauge model locomotive features a striking grey and yellow livery, with sprung metal buffers and NEM tension lock couplings. The highly detailed model is also pre-fitted with HM7000 sound capability for the most authentic experience.  Built at Doncaster Works, 56047 entered service at Toton in July 1978. Transrail Freight was set up as a trainload freight operator based in St Blazey, Cornwall, formed in 1994 from part of BR’s Trainload Freight division during the privatisation of British Rail. During this period, it acquired a number of Class 56 locomotives, retaining the Dutch-style livery but with the addition of Transrail’s logo and markings.  Transrail was one of a number of main line companies to be bought in 1996 to form new freight operator, English Welsh & Scottish (EWS). It was withdrawn in October 2003 and scrapped at Immingham. - DCC Sound Fitted (HM7000) - OO Scale

Hornby LNER A4 4468 'Mallard' LNER Garter Blue (Sound/Smoke Fitted)

LNER A4 4468 'Mallard' LNER Garter Blue (Sound/Smoke Fitted) One of the most famous of all steam locomotives, ‘Mallard’ still holds the world speed record for steam. In July 1938, it reached 126mph on Stoke Bank. Entering service in March of that year in LNER Garter blue, it had full side valances and red wheels, as depicted by our highly detailed model. It was renumbered 22 in 1946, by which time it carried wartime plain black. When it was withdrawn from King’s Cross in April 1963, it was in lined BR green and numbered 60022. The locomotive is preserved in its original livery at the National Railway Museum in York. 'Mallard' has always been one of our most popular models. In 2026, we have given the A4 a tooling update and the model now includes the new Hornby steam generator technology, working headlights and tender lights. Specific to R30551SS Running number 4468 Lined Garter Blue livery Non-corridor tender Double chimney arrangement Valanced streamline body made from die-cast metal LHD cab arrangement Working headlights Working tender lights Common Class A4 features High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler High detail cab and fully decorated backhead with decorated instrument dials Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers, HM7000 APP control and has the Class A4 sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder HM7000 Power Bank compatible Powerful 5 pole skew wound motor Illuminated flickering firebox Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Fully decorated crew figures Turned brass safety valve Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Separately fitted simulated coal load. - DCC HM7000 TXS Sound Fitted w/ Smoke - OO Scale

Hornby L&MR Robert Stephenson’s 'Rocket'

L&MR Robert Stephenson’s 'Rocket'  For the first time, Stephenson's Rocket is presented as a solo locomotive, with a sleek yellow livery, fixed metal buffers and chain couplings. This highly detailed, diminuitive locomotive model is a must-have model for steam collectors, due to its historical importance and incredible model engineering.  This historically important locomotive was built in 1929 to participate in the Rainhill Trials, a competition set-up by the promoters of the Liverpool and Manchester Railway to find suitable motive power for its opening the following year. Built to the order of his father George (who was the L&MR’s principal engineer at the time), ‘Rocket’ was designed by Robert Stephenson and built at his Forth Street Works in Newcastle-upon-Tyne.  The design was the most advanced in its day and ‘Rocket’ won the Trials. The locomotive then became one of four that took part in the L&MR’s opening parade in September 1930. - DCC Ready 6-Pin Socket - OO Scale

Hornby BR Rebuilt Merchant Navy 35028 'Clan line' BR Green (Preserved)

BR Rebuilt Merchant Navy 35028 'Clan line' BR Lined Green (Preserved) The BR Rebuilt Merchant Navy 'Clan Line' is back in OO model form. This newly tooled model locomotive has sprung metal buffers and NEM tension lock couplings and is a highly detailed replica of a popular steam engine. One of the last of its class to be built, this locomotive was completed after nationalisation of Britain’s railways to Bulleid’s Southern ‘Merchant Navy’ design, complete with streamlined casing and chain-driven valve gear, entering service in December 1948. It didn’t receive its name until January 1951, during a ceremony at Southampton Docks. Like all 30 members of the class, ‘Clan Line’ was rebuilt, in its case, during 1959, and remained in service until withdrawal from Nine Elms, London in July 1947. It was subsequently saved privately for preservation and is a regular main line performer, once hauling the prestigious Belmond British Pullman. MODEL SPECIFICATION Die-cast chassis, pony truck and trailing truck Die-cast boiler and running plate Merchant Navy Bullied-Firth-Brown wheels High detail cab and fully decorated backhead with decorated instrument dials Powerful 5 pole skew wound motor with cardan shaft and flywheel Flywheel with cardan shaft arrangement for smooth running Pogo pin wheel pickup arrangement for easy pickup servicing Die-cast connecting rods and valve gear Oilite main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Optional fit rear flanged wheelset. Only recommended for larger layouts with sweeping curves or for display purposes Wheel pickups on the main locomotive and tender wheelsets Separately fitted simulated coal load. TOOLING High detail OO gauge model based on extensive research, 3D scanning and original works drawings Cast trailing truck Modern 6000 gallon tender with additional pump, air tanks and battery arrangement for main line running (as preserved) Opening cab roof vent DCC Fitted with a 21-pin decoder socket Flickering firebox Working cab light MCU controlled electric front lamps for full lamp code control Working tender lamps Eight-way locomotive to tender connection LIVERY BR Lined Green livery - OO Scale

Hornby BR Rebuilt Merchant Navy 35028 'Clan line' BR Green(Sound/Smoke)

BR Rebuilt Merchant Navy 35028 'Clan line' BR Lined Green (Sound/Smoke Fitted) The BR Rebuilt Merchant Navy 'Clan Line' is back in OO model form. This newly tooled model locomotive has sprung metal buffers and NEM tension lock couplings and is a highly detailed replica of a popular steam engine. One of the last of its class to be built, this locomotive was completed after nationalisation of Britain’s railways to Bulleid’s Southern ‘Merchant Navy’ design, complete with streamlined casing and chain-driven valve gear, entering service in December 1948. It didn’t receive its name until January 1951, during a ceremony at Southampton Docks. Like all 30 members of the class, ‘Clan Line’ was rebuilt, in its case, during 1959, and remained in service until withdrawal from Nine Elms, London in July 1947. It was subsequently saved privately for preservation and is a regular main line performer, once hauling the prestigious Belmond British Pullman. Please Note: this model requires a DCC controller or the HM7000 app to control.  Specific to R30490SS: STEAM GENERATOR Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder Water reservoir for up to 20 minutes continuous steam running MODEL SPECIFICATION Die-cast chassis, pony truck and trailing truck Die-cast boiler and running plate Merchant Navy Bullied-Firth-Brown wheels High detail cab and fully decorated backhead with decorated instrument dials Powerful 5 pole skew wound motor with cardan shaft and flywheel Flywheel with cardan shaft arrangement for smooth running Pogo pin wheel pickup arrangement for easy pickup servicing Die-cast connecting rods and valve gear Oilite main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Optional fit rear flanged wheelset. Only recommended for larger layouts with sweeping curves or for display purposes Wheel pickups on the main locomotive and tender wheelsets Separately fitted simulated coal load. TOOLING High detail OO gauge model based on extensive research, 3D scanning and original works drawings Cast trailing truck Modern 6000 gallon tender with additional pump, air tanks and battery arrangement for main line running (as preserved) Opening cab roof vent DCC Fitted with a 21-pin decoder socket Flickering firebox Working cab light MCU controlled electric front lamps for full lamp code control Working tender lamps Eight-way locomotive to tender connection LIVERY BR Lined Green livery - OO Scale

Hornby Sovereign Pullman Train Set (TXS Sound/Smoke Fitted)

Sovereign Pullman Train Set (TXS Sound/Smoke Fitted) A masterpiece of British steam engineering reimagined for the modern railway enthusiast. This premium OO gauge train set captures the elegance and power of the legendary A4 Class locomotive, complete with authentic sound, illuminated headlamps and a realistic steam generator. Paired with three exquisitely detailed Pullman coaches featuring interior lighting and glowing table lamps, the set evokes the golden age of luxury rail travel. A double-circuit track layout with siding gives you room to expand, while mains power and Bluetooth control via the free Hornby HM7000 app delivers smooth, intuitive operation from your smartphone or tablet. This is a statement set for those who value heritage, detail and cutting-edge control. Please Note: This set requires the use of the HM7000 free to download APP for control. Includes: A high quality presentation case pull-out draws. A 3rd and 2nd radius loop of track with siding and buffer stop. Points are pre-fitted with point clips for full layout power and control. HM7000 power cable to provide track power. Hornby TrackMat Rerailer A4 Locomotive – Sir Nigel Gresley High detail OO gauge model based on extensive research and original works drawings. Heavy die-cast chassis Running number 60007 BR Pussian Blue Corridor tender Double chimney arrangement. Un-valanced streamline plastic body. LHD cab arrangement. Working headlights Working tender light. High detail cab and fully decorated backhead with decorated instrument dials. Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers, HM7000 APP control and has the Merchant Navy sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder. HM7000 Power Bank compatible. Powerful 5 pole skew wound motor. Illuminated flickering firebox. Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Fully decorated crew figures. Turned brass safety valve Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Sprung metal buffers. Front and rear NEM coupling pocket. Separately fitted simulated coal load. Pullman Coaches – Ione, Lucille & Zena All steel K-Type Pullman Coaches Exquisite decoration with a wealth of separately fitted parts. Working table lamps Sprung metal buffers NEM tension lock couplers Pullman Coach Ione – Kitchen First Pullman Coach Lucille – First Class Parlour Pullman Coach Zena – First Class Parlour - OO Scale

Hornby Branch Line Mixed Traffic Train Set

Branch Line Mixed Traffic Train Set This exciting electric train set brings the theme of a classic branch line to life, where goods and passengers travel to connect communities. With easy clip-together track, you can quickly build the oval layout with a siding and start playing straight away. The set includes a motorised diesel locomotive, passenger coach, two open wagons, a mains-powered controller, a station building, platform and midi play mat to inspire hours of imaginative play. Best of all, the adventure can grow — add more track, trains and buildings to expand the railway and create even bigger journeys. Perfect for railway fans with big imaginations. Includes: 1x Class 06 06008 BR Blue Diesel Locomotive 1x 4-Wheeler Passenger Coach 1x 7 Plank Wagon "Duxbury Park Colliery" 1x 7 Plank Wagon "A.Bramley Fenny Stratford & Oxford" 1x Station Building 1x Platform 1x Play Mat 1x Buffer Stop 1x Oval Loop of Track w/ Siding 1x Wall Transformer 1x Controller 1x Rerailer - OO Scale

Bat Boat With Batman & Robin (Reissue) Corgi Toys 107

Corgi Toys 107 - Bat Boat With Batmobile & Robin (Reissue) (1:46) Introduced into the CORGI range in 1967 – after the Bat Boat appeared in the previous year’s Batman movie – the problem of hitching the iconic boat to CORGI’s original 1966 Batmobile (which didn’t have a tow-hook) was solved by a small plastic sleeve that fitted neatly over the Batmobile’s turbo exhaust. Based on CORGI’s existing Dolphin 20 Cabin Cruiser on a die-cast trailer (that was hitched to a Buick Riviera in Gift Set 31), the early CORGI Bat Boat can be distinguished from the later ‘Whizzwheels-era’ version by the graphics and Batman logo on the fin, flame graphics on the sides of the hull and a beacon cage between the Batman and Robin figures.

Dapol Class 59/2 59206 "John F Yeoman" Freightliner G&W Orange

Class 59/2 59206 "John F Yeoman" Freightliner G&W Orange  The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/0 59002 "Alan J Day" Aggregate Industries

Class 59/0 59002 "Alan J Day" Aggregate Industries  The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/0 59004 "Paul A Hammond" Foster Yeoman (Late)

Class 59/0 59004 "Paul A Hammond" Foster Yeoman (Late) The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/1 59101 "Village of Whatley" ARC (Revised)

Class 59/1 59101 "Village of Whatley" ARC (Revised) The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/1 59104 "Village of Great Elm" Hanson

Class 59/1 59104 "Village of Great Elm" Hanson The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/2 59201 "Vale of York" EWS

Class 59/2 59201 "Vale of York" EWS The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Super Formula 'Carrera Go!!' Set

Super Formula 'Carrera Go!!' Set Experience the adrenaline of Formula 1 racing at home with the Carrera GO!!! Super Formula slot car set. This 1:43 scale set features detailed replicas of the Oracle Red Bull Racing RB21 driven by Max Verstappen and the McLaren Formula 1 Team car piloted by Lando Norris, bringing high-speed action to your living room. The expansive 5.3-metre track includes dynamic elements such as a loop, crossover, and tight curves, providing an exhilarating racing experience. With ergonomic controllers featuring turbo boost, racers aged 6 and up can enjoy competitive fun on the 180 x 75 cm layout. The set comes complete with two slot cars, track pieces, controllers, and a transformer, and is fully expandable with additional Carrera GO!!! components. Whether you're a seasoned slot car racer or new to the hobby, the Carrera GO!!! Super Formula set delivers excitement and realism in every race. Contents: 2 x 1:43 Scale Carrera cars 5.3m of Carrera track UK Power Supply

Tamiya German 3 Ton 4x2 Cargo Truck (1:35)

German 3 Ton 4x2 Cargo Truck From 1937 to 1944, over 78,000 medium 3ton 4x2 Cargo Trucks were produced and they became the most recognized German army truck in WWII. It featured a durable rear wheel-drive chassis with superior off-road handling and a large cargo area, which enabled superb load-carrying capacity. They were used until the end of war to transport troops and supplies on all fronts. Features: ★This is a 1/35 plastic assembly model of German 3ton 4x2 Cargo Truck.  ★Length:174mm Sturdy body and unique cabin are all realistically reproduced.  ★Accurately recreated forward-bent chassis, and suspension features fewer parts for easy assembly.  ★Movable front wheels for perfect diorama situations.  ★The rear cargo area has a realistic wood pattern for greater realism.  ★Masking stickers for windows are included in kit.  ★1 driver and 1 navigator figure and four different markings included.  ★Comes with sets of fuel drums and jerry cans.

Bachmann Class 13 D4502 BR Green (Wasp Stripes) DCC Sound Fitted

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied

Bachmann Class 13 D4502 BR Green (Wasp Stripes) Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied

Bachmann Class 13 13003 BR Blue - DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 13003 BR Blue - Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 D4502 BR Green (Wasp Stripes)

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only

Airfix Westland Lysander Mk1/Mk3 Masking Set (1:48)

Westland Lysander Mk1/Mk3 Masking Set - Compatible with Kit A07116 (1:48) Contains masks for cockpit canopy.

Hornby BR Class 153 153360 Serco Northern Rail

BR Class 153 153360 Serco Northern Rail The Hornby Class 153 No. 153360 is finished in the distinctive Northern Rail livery, representing its appearance during regular service in the north of England. It is DCC ready with a 21-pin decoder socket for easy digital upgrade and fitted with NEM couplings. History: The Northern Rail franchise commenced in December 2004 and inherited its fleet from those of Arriva Trains Northern and First North Western, including a large number of Class 153 single units, of which No. 153360 was one.  Under Northern Rail, the unit saw considerable use in the Carlisle area, including services on the Settle and Carlisle line and the Cumbria coastal line to Barrow-in-Furness.  Arriva Rail North, Northern Rail’s successor from 2016, operated the largest fleet of Class 153 units in the UK. No. 153360 went into storage in late 2021 and was subsequently scrapped. - OO Scale

WWScenics WWS Wild Meadow Tufts 4mm x103

WWS Wild Meadow Tufts 4mm x103 A set of Self-Adhesive Static Grass Tufts by WWScenics. Easily applied on any layout or miniature base. Simply peel the tuft from the backing paper and place wherever required. Tufts can be used to represent hedgerows and bushes, wild or long grass & much more. Perfect for your model railway layout, model bases, wargame battleboards or dioramas to add texture and realistic detail. Produced from realistic nylon fibres with a vibrant finish. Set contains 103x individual static grass tufts of varied sizes. Available in a range of realistic colour blends to suit a huge variety of scenery.

WWScenics WWS Wild Meadow Tufts 6mm x103

WWS Wild Meadow Tufts 6mm x103 A set of Self-Adhesive Static Grass Tufts by WWScenics. Easily applied on any layout or miniature base. Simply peel the tuft from the backing paper and place wherever required. Tufts can be used to represent hedgerows and bushes, wild or long grass & much more. Perfect for your model railway layout, model bases, wargame battleboards or dioramas to add texture and realistic detail. Produced from realistic nylon fibres with a vibrant finish. Set contains 103x individual static grass tufts of varied sizes. Available in a range of realistic colour blends to suit a huge variety of scenery.

WWScenics WWS Winter Tufts 4mm x103

WWS Winter Tufts 4mm x103 A set of Self-Adhesive Static Grass Tufts by WWScenics. Easily applied on any layout or miniature base. Simply peel the tuft from the backing paper and place wherever required. Tufts can be used to represent hedgerows and bushes, wild or long grass & much more. Perfect for your model railway layout, model bases, wargame battleboards or dioramas to add texture and realistic detail. Produced from realistic nylon fibres with a vibrant finish. Set contains 103x individual static grass tufts of varied sizes. Available in a range of realistic colour blends to suit a huge variety of scenery.

WWScenics WWS Winter Tufts 6mm x103

WWS Winter Tufts 6mm x103 A set of Self-Adhesive Static Grass Tufts by WWScenics. Easily applied on any layout or miniature base. Simply peel the tuft from the backing paper and place wherever required. Tufts can be used to represent hedgerows and bushes, wild or long grass & much more. Perfect for your model railway layout, model bases, wargame battleboards or dioramas to add texture and realistic detail. Produced from realistic nylon fibres with a vibrant finish. Set contains 103x individual static grass tufts of varied sizes. Available in a range of realistic colour blends to suit a huge variety of scenery.

WWScenics WWS Summer Tufts 6mm x103

WWS Summer Tufts 6mm x103 A set of Self-Adhesive Static Grass Tufts by WWScenics. Easily applied on any layout or miniature base. Simply peel the tuft from the backing paper and place wherever required. Tufts can be used to represent hedgerows and bushes, wild or long grass & much more. Perfect for your model railway layout, model bases, wargame battleboards or dioramas to add texture and realistic detail. Produced from realistic nylon fibres with a vibrant finish. Set contains 103x individual static grass tufts of varied sizes. Available in a range of realistic colour blends to suit a huge variety of scenery.

WWScenics WWS Summer Tufts 4mm x103

WWS Summer Tufts 4mm x103 A set of Self-Adhesive Static Grass Tufts by WWScenics. Easily applied on any layout or miniature base. Simply peel the tuft from the backing paper and place wherever required. Tufts can be used to represent hedgerows and bushes, wild or long grass & much more. Perfect for your model railway layout, model bases, wargame battleboards or dioramas to add texture and realistic detail. Produced from realistic nylon fibres with a vibrant finish. Set contains 103x individual static grass tufts of varied sizes. Available in a range of realistic colour blends to suit a huge variety of scenery.

WWScenics WWS Autumn Tufts 4mm x103

WWS Autumn Tufts 4mm x103 A set of Self-Adhesive Static Grass Tufts by WWScenics. Easily applied on any layout or miniature base. Simply peel the tuft from the backing paper and place wherever required. Tufts can be used to represent hedgerows and bushes, wild or long grass & much more. Perfect for your model railway layout, model bases, wargame battleboards or dioramas to add texture and realistic detail. Produced from realistic nylon fibres with a vibrant finish. Set contains 103x individual static grass tufts of varied sizes. Available in a range of realistic colour blends to suit a huge variety of scenery.

WWScenics WWS Autumn Tufts 6mm x103

WWS Autumn Tufts 6mm x103 A set of Self-Adhesive Static Grass Tufts by WWScenics. Easily applied on any layout or miniature base. Simply peel the tuft from the backing paper and place wherever required. Tufts can be used to represent hedgerows and bushes, wild or long grass & much more. Perfect for your model railway layout, model bases, wargame battleboards or dioramas to add texture and realistic detail. Produced from realistic nylon fibres with a vibrant finish. Set contains 103x individual static grass tufts of varied sizes. Available in a range of realistic colour blends to suit a huge variety of scenery.