NCE Power Cab DCC Starter Set

NCE Power Cab DCC Starter Set An entire DCC system in the palm of your hand! This 2 Amp system can operate up to 4 OO sized locomotives or 8 N gauge trains. This cab provides all of the capability and ease of use that you’ve heard about in our Power Pro system, at an entry level price. Installation is a snap. Hook two wires to your track and plug in the cab. You’re off and running trains!   The Power Cab kit contains: NCE Power Cab 7' Power Cab Cable PCP Power Panel EU / UK Approved Power Supply Pro Cab Coiled Cord Manual.  

DCC Concepts Zen Blue+ Direct 6-pin 2 function

Zen Blue+ Direct 6-pin 2 function Zen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with simple-to-use ONE step locomotive set-up and advanced brown-out protection. All of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured. DCD-ZN6D.2 replaces the previous version - DCD-ZN6D. Decoder features: 1.1 Amps peak power 750mA continuous power 2 functions at 100mA each 14mm x 9mm x 3.5mm 6-pin direct One-Step Loco Setup  

DCC Concepts Zen Black Classic Small Decoder 8-pin harness + ABC module

Zen Black Classic Small Decoder 8-pin harness + ABC module Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection. All of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured. This pack includes 1x ABC board to use with automatic braking functionality.   Decoder features: 1.1 Amps peak power 750mA continuous power 4 functions at 100mA each 19mm x 11mm x 6mm 8-pin & harness One-Step Loco Setup Shuttle mode (requires ABC boards for this to function) Stay-Alive connection

Peco Tracklayers Tool set

Tracklayers Tool set A specially selected tool set from expert modellers here at PECO for laying track. These tools are vital to all modellers, included also is expert knowledge in the form a useful guide brought to you by the experts at Railway Modeller. Includes: Xuron track cutters Snipe nose pliers Snap-off knife with 10 spare blades Set of 4 needle files Pin vice Drill bits: 0.5 to 2.5 mm A4 cutting mat Sharpie marker pen Track pin pusher PECO track pins PECO rail cleaner Shows you how guide: 'Laying the track'

Hornby HM7070 - Power Bank

HM7070 - Power Bank Stay-alive for use with HM7000 decoders

DCC Concepts DCS-MSET Mega Screw Set 16x 60 Vials (w/20 Drill Bit set)

Mega Screw Set 16x 60 Vials (w/20 Drill Bit set)   Mega set of 16 vials each containing 60 panhead (60x 1.0x3mm, 60x 1.0x5mm, 60x 1.0x8mm, 60x 1.5x4mm, 60x 1.5x6mm, 60x 1.5x8mm, 60x 2.0x5mm, & 60x 2.0x8mm) 60 countersunk screws (60x 1.0x3mm, 60x 1.0x5mm, 60x 1.0x8mm, 60x 1.5x4mm, 60x 1.5x6mm, 60x 1.5x8mm, 60x 2.0x5mm, & 60x 2.0x8mm) Set also comes with a 20 piece drillset with HSS titanium covered drills covering 0.3 to 1.6mm. NOTES - screws are now BLACK in colour            - Packaging can vary and might be slightly different from image

DCC Concepts DCD-ZNM.HP.6 Zen Black Decoder Midi-Sized 8PIN Harness 6 Fct

DCD-ZNM.HP.6 Zen Black Decoder Midi-Sized 8PIN Harness 6 Fct Includes – 3 Amps peak power– 1.5 Amps continuous RMS power– 6 functions (2x 250mA, 4x 100mA)– Size 30mm x 18.3mm x 6mm– 8-pin harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Brown-Out Protection on-board

DCC Concepts DCD-ZNmini.4 Zen Black Decoder Mini 8Pin

DCD-ZNmini.4 Zen Black Decoder Mini 8Pin Includes – 1.1 Amps peak power– 750mA continuous power– 4 functions at 100mA each– 19mm x 11mm x 6mm– 8-pin & harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Brown-Out Protection on-board– Stay-Alive connection

DCC Concepts DCD-ZBHP.6 Zen Black Buddha Decoder O & Larger Scale

DCD-ZBHP.6 Zen Black Buddha Decoder O & Larger Scale Includes  – 5 Amps peak power– 3 Amps continuous power– 6 functions at 250mA each– On-board high-power stay-alive– 42mm x 27mm x 13mm– 12 screw terminals– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)

DCC Concepts DCD-ZN68.2 Zen Blue+Decoder NEM651 6-Pin Direct/ Harness 2 Funct

DCD-ZN68.2 Zen Blue+Decoder NEM651 6-Pin Direct/ Harness 2 Funct Includes - 1.1Amps Peak Power - 750mA Continuous power - 2 Functions at 100mA each - Dimensions 13.5mm x 8.5mm - 6 PIN Direct, 6 PIN Harness and 8 PIN Harness - One step loco setup  

DCC Concepts DCC Decoder Convertor 3 Wire to 2 Wire (3)

DCC Decoder Convertor 3 Wire to 2 Wire (3) - Pack of three solenoid decoders. - The SDC is a clever wee device that takes the outputs from a 3-wire accessory decoder and turns them into a 2-wire reversing DC decoder, allowing you to use most solenoid accessory decoders to power Kato, Cobalt or other brands of point motor. - Please note that for motor drive decoders you will also need to set ‘power on’ time for between 2 and 4 seconds.

Gaugemaster Twin Track Cased Controller

Twin Track Cased Controller Ideal for expanding the train set with the ability to control 2x locomotives independantly and power accessories - All in one controller with power lead wired - Sturdy Metal Casing - Accessory outputs ideal for point motors - Requires connecting to the mains via the socket - Suitable for N, OO and OO9 Gauges

Gaugemaster COMBI Single Track Controller with Plug in Transformer

COMBI - Single Track Analogue Controller with Plug in Transformer Ideal for the beginner with a first train set or expanding on a current railway.  Includes - Hand held controller - Mains Transformer Technical: - Input: 230v Mains - Controlled Output: 12v DC - Accessory Output: 16v AC - Rating 1.1Amp - Suitable for N, OO, OO9 and (SMALL Dapol Locomotives) O Gauge

Peco Turntable Motor

Turntable motor and control system  Ideal for anyone updating an older motor drive or converting a manual drive turntable into electric. This is a "NON Indexing" motor system meaning it has no pre set alignment programs, offering ultimate flexibility without any rewiring of your layout. Includes - Motor Unit and fixing Lugs - Hand Held Controller - Wire and fixings  - Manual of instructions - Requires power supply from a 12VDC 2Amp Supply NOT included - OO and N Scale Peco Turntables

Peco Smart Frog

Smart Frog unit - Designed to change Polarity on Electrofrog points whilst using the PLS100 SmartSwitch Set

Peco Power Feed Joiners For C100 - C124 Rail (4 pairs)

Power Feeds - Designed for Code 100 OO Gauge track including (Setrack and Code 124 O Gauge Tracks) - 4 Pairs included