DCC Concepts Cobalt SS Medium 600mm Extension Leads (3)

Cobalt SS Medium 600mm Extension Leads (3) Cobalt-SS Universal extension leads. Use these cables to control your Cobalt-SS motors in pairs, either both moving in the same direction, or moving opposite each other

Bachmann 21 Pin DCC Loco-Decoder (with Brake Button function)

21 Pin DCC Loco-Decoder (with Brake Button function) A 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket (do not use with the Bachmann Branchline Class 90 – use 36-569A with these models). This decoder replaces item No. 36-557 and can be used in any model for which item No. 36-557 is recommended Highlights include: Dual-mode DCC/DC decoder with Back EMF function 10 powered function outputs (+8 logic level outputs and 2 logic level/SUSI outputs) 1.5A continuous load RailComPlus® for automatic registration when used with selected DCC systems Suitable for models equipped with DC motors (including coreless motors) Brake Button function for realistic control of braking (operates on F2) Operating Modes: NMRA/DCC with 14, 28 and 128 speed steps Short and Long addresses DCC and DC operation (DC operation is de-selectable) Automatic recognition of operational mode and DCC speed step selection Supports Lenz® LG 100 braking sections Supports ABC braking sections Motor Control Features Suitable for models equipped with DC motors (including coreless motors) 1.5A continuous load Motor regulation with pulse width frequency from 10kHz to 50kHz Motor output overload protection; Back EMF (de-selectable) Function Outputs: 10 powered function outputs with overload protection (4 via 21MTC pins, 6 via solder pads) 10 logic level outputs (8 via 21MTC pins, 2 via solder pads) 250mA load per output 500mA total load of all function outputs 2 additional logic outputs Shunting speed and momentum key selectable Brake Button function for realistic control of braking (operates on F2) Dimensions: 21.4mm x 15.5mm x 4.5mm Default Address: Address 3 Programming: DCC Service Mode & DCC PoM (Programming on Main) Additional Features: RailCom® Feedback system RailComPlus® automatic Registration

Hornby HM7070 - Power Bank

HM7070 - Power Bank Stay-alive for use with HM7000 decoders

DCC Concepts Cobalt iP Digital Point Motor (Single)

Cobalt iP Digital Point Motor (Single) - Any Scale Includes: - 1x Digital Point motor - Instruction manual  - Product Size:   - Width 28.5mm (67mm over the mounting wings)   - Depth 40mm (48mm over the mounting wings)   - Height 44mm (67mm over the connector) - Bag of attachments Features: The Cobalt-iP Digital’s super-low static current draw means very low power bus loading and the Cobalt-iP Digital is also able to cope with a very wide range of DC or DCC power supply voltages. We prefer 9~12V regulated power for DC, but any DCC voltage from 7 to 23 volts is acceptable. Cobalt-iP Digital is supplied with the throw bar already centred for easy installation. You can activate and de-activate self-centring and even swap the throw direction with a simple software command. This allows easy matching to layout needs, software driven computer displays, track diagrams or computer control. With Cobalt-IP “Intelligent Power” Digital Motors, you also have all the connection versatility you could ever need already built in. Frog power needs only one added wire, and a totally separate SPDT changeover switch can facilitate interlocking, control of signal feather indicators or ground signals, etc. Cobalt iP Digital also features the ability to add panel switches or control via DCC. The connection terminals used for panel switch connection are also able to give direct high/low state computer or DCC system feedback, so one motor really CAN do it all. Add to the above the ability to work with DC and super-simple wiring or DCC operation, or to combine digital and analog control… and Cobalt iP Digital really is the best choice for all layouts, no matter how you choose to power the trains!

DCC Concepts Cobalt SS Medium 600mm Extension Leads (3)

Cobalt SS Medium 600mm Extension Leads (3) Includes - Use these cables to control your Cobalt-SS motors in pairs, either both moving in the same direction, or moving opposite each other.

Bachmann Class 90 DCC Loco-Decoder w/Servo Motor Operation & Brake

A 21 Pin (21MTC) DCC Decoder configured for use in the Bachmann Branchline Class 90 – models produced from 2021 onwards. Configured to control the servo-motor-operated Pantograph. Highlights include: Dual-mode DCC/DC decoder with Back EMF function 1.2A continuous load Brake Button function for realistic control of braking Controls the servo-motor-operated Pantograph Default Functions when fitted to Bachmann Branchline Class 90 F0 - Direction Lights on/off F1 - Cab Lights (Directional) on/off F2 - Brake Button F3 - Day/Night Mode F4 - Direction Lights Off (Non-Pantograph End) F5 - Direction Lights Off (Pantograph End) F6 - Pantograph Up/Down

Bachmann Next18 DCC Loco-Decoder (with Brake Button function)

Bachmann Next18 DCC Loco-Decoder (with Brake Button function) - F2 on your DCC controller will activate break function (in the case of sound fitted locomotives you will hear brake sounds too) - Pressing F2 down will bring the locomotive to a complete standstill