NCE Power Cab DCC Starter Set

NCE Power Cab DCC Starter Set An entire DCC system in the palm of your hand! This 2 Amp system can operate up to 4 OO sized locomotives or 8 N gauge trains. This cab provides all of the capability and ease of use that you’ve heard about in our Power Pro system, at an entry level price. Installation is a snap. Hook two wires to your track and plug in the cab. You’re off and running trains!   The Power Cab kit contains: NCE Power Cab 7' Power Cab Cable PCP Power Panel EU / UK Approved Power Supply Pro Cab Coiled Cord Manual.  

DCC Concepts Zen Blue+ Direct 6-pin 2 function

Zen Blue+ Direct 6-pin 2 function Zen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with simple-to-use ONE step locomotive set-up and advanced brown-out protection. All of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured. DCD-ZN6D.2 replaces the previous version - DCD-ZN6D. Decoder features: 1.1 Amps peak power 750mA continuous power 2 functions at 100mA each 14mm x 9mm x 3.5mm 6-pin direct One-Step Loco Setup  

DCC Concepts Zen 3-Wire Medium Stay Alive for Zen Black & Blue+ Decoders

Zen 3-Wire Medium Stay Alive for Zen Black & Blue+ Decoders A single medium Stay-Alive with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders. Usable with Zen Black, Zen Blue+, Lenz and ESU or any decoder with three-wire connections for Stay-Alive. Please note that connection of a DCCconcepts Zen Stay-Alive to a non-DCCconcepts decoder may invalidate your warranty, please check documentation which came with your decoder for details.

DCC Concepts Zen Black Classic Small Decoder 8-pin harness + ABC module

Zen Black Classic Small Decoder 8-pin harness + ABC module Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection. All of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured. This pack includes 1x ABC board to use with automatic braking functionality.   Decoder features: 1.1 Amps peak power 750mA continuous power 4 functions at 100mA each 19mm x 11mm x 6mm 8-pin & harness One-Step Loco Setup Shuttle mode (requires ABC boards for this to function) Stay-Alive connection

DCC Concepts Slim Vertical Mounted Magnetic Sensors (3-pack)

DCC Concepts - Slim Vertical Mounted Magnetic Sensors (3-pack) These detectors have been designed to be very easy to install. Super-slim at only 4mm in diameter, they will fit comfortably between the sleepers of DCCconcepts and Peco Code 100 and Code 75 track as well as most other brands of track in HO. (N scale users will need to temporarily move a sleeper while drilling, but will also find installation quite easy). They are Normally Off and are triggered or turned on by a small magnet that is attached to the loco or rolling stock. While it is always good to use smaller magnets and get the magnet as close as possible to any sensor such as this, we find that even with quite a small magnet we can get reliable results from up to 10mm away. Ideal for all detection and to trigger devices such as Cobalt Point Motors or Alpha. The connector is supplied so that the detectors can be used with our ADiA range of Accessory Decoders. Length of sensor: 15mm Width of sensor: 4mm Length of wire: 300mm Quantity in pack: 3 (Was DCP-TMS) Please note these are Normally Off or Normally Open momentary type connections

DCC Concepts Legacy Wired Joiners Code 100 Rail Pack of 6x Pairs

Legacy Wired Joiners Code 100 Rail Pack of 6x Pairs 300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 100 track from Legacy and equivalent track from all major brands. Super-quick and easy to use – no soldering necessary! Pack contains 6 pairs - OO Scale

DCC Concepts Legacy Wired Rail Joiners Code 75 Track Pack of 6x Pairs

Legacy Wired Rail Joiners Code 75 Track Pack of 6x Pairs 300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 75 track from Legacy and equivalent track from all major brands. Super-quick and easy to use – no soldering necessary! Pack contains 6 pairs - OO Scale

DCC Concepts LM-PP.4 Legacy Models Powerpoint Baseboard Dowels 4x pack

DCC Concepts - LM-PP.4 Legacy Models Powerpoint Baseboard Dowels 4x pack Wire-Free Baseboard connections Easily installed, super-accurate alignment dowels that remove the need for wires! PowerPoint dowels are a dream come true. Highly accurate, they can both transmit track power and perfectly align your baseboards. All of the electrial parts are gold plated too, so they'll never fail you! PowerPoints can confortably handle far more power than a DCC system can deliver, so you will only need to use one pair to reliably transfer power between average baseboards. Work carefully and you will obtain a great result when installing your new Legacy PowerPoint Dowels Clamp the baseboard ends together. Be sure the top surfaces are perfectly level and aligned. (You can temporarily screw an offcut of wood over the top of joint to ensure it is perfect) Mark the position for the dowels. Drill a pilot hole right through both ends using a 3mm drill. (keep it at 90 degrees to the board faces as this step will guide all subsequent drilling) Separate the two boards. Use a 19mm spade drill bit, and go just deep enough into the front face of each board end (2mm) (This is about right to allow the flange of the dowel to sit flush with the baseboard ends) Now, using a 13mm spade drill bit and working from the other side, drill right through the board. You will now have a 13mm hole with a 19mm flange. (Clean it up and remove anu rough edges and sawdust to make it ready for the Dowell installation) Add a little PVA to the grooves in each dowel & insert it flush with the face of the board. (If it’s too tight for a firm push-fit, ream the hole with sandpaper. Do NOT tap them in as you may damage them) To secure boards together after alignment, drill clearance holes for 1/4” bolts & wingnuts. (They do not need to be tight as the dowels will do all the work of aligning the boards perfectly) Connect the track power wires. Your PowerPoints are now installed and ready! By the way...PowerPoints will carry more than 5 amps of track power, so you will not overload them - ever!. Only top quality materials are used. The electrical parts are all gold plated so they will never tarnish and lose conductivity. PowerPoints can also be disassembled for cleaning or lubrication if needed, and we even supply you with spare parts in the pack. They really ARE designed to last forever!

DCC Concepts N Scale Westinghouse Cosmetic Point Motors (12)

DCC Concepts -N Scale Westinghouse Cosmetic Point Motors (12) 12x N Scale Westinghouse Motors True-scale, high quality models of the Westinghouse EP Pneumatic Point Motor. Widely used in the UK, Australia and parts of Europe. These accurate representations make a real difference when added to your layout and are the perfect partner for our Cobalt motors!

DCC Concepts OO Scale Westinghouse Cosmetic Point Motors (12)

DCC Concepts -OO Scale Westinghouse Cosmetic Point Motors (12) 12x OO/HO Scale Westinghouse Motors True-scale, high quality models of the Westinghouse EP Pneumatic Point Motor. Widely used in the UK, Australia and parts of Europe. These accurate representations make a real difference when added to your layout and are the perfect partner for our Cobalt motors.

DCC Concepts Pack of 48 Assorted Links for Cobalt-SS (12 each, 4 types)

DCC Concepts - Pack of 48 Assorted Links for Cobalt-SS (12 each, 4 types) - Any Scale Custom linkage for Cobalt-SS motors - use these to link your Cobalt-SS motor to your point or turnout. Each pack contains 48 links, 12 each of 4 different types.

DCC Concepts Cobalt SS Medium 600mm Extension Leads (3)

Cobalt SS Medium 600mm Extension Leads (3) Cobalt-SS Universal extension leads. Use these cables to control your Cobalt-SS motors in pairs, either both moving in the same direction, or moving opposite each other

DCC Concepts Inter-Baseboard Connectors (2 Pack)

Inter-Baseboard Connectors (2 Pack) These clever pluggable screw-terminal connectors allow you to easily connect baseboard power with plug-and-socket connections! Suitable for DC or DCC on systems up to 5 Amps. Includes: - 2x Pluggable Screw-Terminal Connectors - Ferruled Connector Wire - Fixing Screws - Spare Ferrules (will require a crimping tool to use the spares)

DCC Concepts Cobalt Barrel-Plug Adapter (3 Pack)

Cobalt Barrel-Plug Adapter (3 Pack) Includes: A pack of three coaxial DC barrel plug adapters that will let you connect bare wires to a DC-plug fitted power supply that takes away the need to cut the plug off and get the soldering iron out. Suitable for the following DCCconcepts power supplies: - DCP-PS12 - DCP-12.3.XX - DCP-18.2.XX - DCP-18.5.XX

DCC Concepts AE Model 2-Wire High Power Plug & Play Stay-Alive (3-Pack)

AE Model 2-Wire High Power Plug & Play Stay-Alive (3-Pack) Compatible with Hornby TXS (HM7000) decoders (replaces R7377 / HM7070) to give improved performance and connectivity. AE Model 2-Wire Stay Alive for connection to AE Model Decoders including plug-and-play connector.   Dimensions  (individual) 23mm x 17mm x 6mm Cable length = 120mm  

DCC Concepts AE Model 2-Wire High Power Plug & Play Stay-Alive

AE Model 2-Wire High Power Plug & Play Stay-Alive Compatible with Hornby TXS (HM7000) decoders (replaces R7377 / HM7070) to give improved performance and connectivity. AE Model 2-Wire Stay Alive for connection to AE Model Decoders including plug-and-play connector. Dimensions 23mm x 17mm x 6mm Cable length = 120mm    

Bachmann 21 Pin DCC Loco-Decoder (with Brake Button function)

21 Pin DCC Loco-Decoder (with Brake Button function) A 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket (do not use with the Bachmann Branchline Class 90 – use 36-569A with these models). This decoder replaces item No. 36-557 and can be used in any model for which item No. 36-557 is recommended Highlights include: Dual-mode DCC/DC decoder with Back EMF function 10 powered function outputs (+8 logic level outputs and 2 logic level/SUSI outputs) 1.5A continuous load RailComPlus® for automatic registration when used with selected DCC systems Suitable for models equipped with DC motors (including coreless motors) Brake Button function for realistic control of braking (operates on F2) Operating Modes: NMRA/DCC with 14, 28 and 128 speed steps Short and Long addresses DCC and DC operation (DC operation is de-selectable) Automatic recognition of operational mode and DCC speed step selection Supports Lenz® LG 100 braking sections Supports ABC braking sections Motor Control Features Suitable for models equipped with DC motors (including coreless motors) 1.5A continuous load Motor regulation with pulse width frequency from 10kHz to 50kHz Motor output overload protection; Back EMF (de-selectable) Function Outputs: 10 powered function outputs with overload protection (4 via 21MTC pins, 6 via solder pads) 10 logic level outputs (8 via 21MTC pins, 2 via solder pads) 250mA load per output 500mA total load of all function outputs 2 additional logic outputs Shunting speed and momentum key selectable Brake Button function for realistic control of braking (operates on F2) Dimensions: 21.4mm x 15.5mm x 4.5mm Default Address: Address 3 Programming: DCC Service Mode & DCC PoM (Programming on Main) Additional Features: RailCom® Feedback system RailComPlus® automatic Registration

Peco Tracklayers Tool set

Tracklayers Tool set A specially selected tool set from expert modellers here at PECO for laying track. These tools are vital to all modellers, included also is expert knowledge in the form a useful guide brought to you by the experts at Railway Modeller. Includes: Xuron track cutters Snipe nose pliers Snap-off knife with 10 spare blades Set of 4 needle files Pin vice Drill bits: 0.5 to 2.5 mm A4 cutting mat Sharpie marker pen Track pin pusher PECO track pins PECO rail cleaner Shows you how guide: 'Laying the track'

Hornby HM7000-21TXS: Bluetooth® & DCC Sound Decoder (21-pin)

HM7000-21TXS: Bluetooth® & DCC Sound Decoder (21-pin) For use with HM7000 APP

Hornby HM7000-6: Bluetooth® & DCC Decoder (6-pin)

HM7000-6: Bluetooth® & DCC Decoder (6-pin) For use with HM7000 APP 

Hornby HM7000-8TXS: Bluetooth® & DCC Sound Decoder (8-pin)

HM7000-8TXS: Bluetooth® & DCC Sound Decoder (8-pin) For use with HM7000 APP

Hornby HM7000-N18TXS: Bluetooth® & DCC Sound Decoder (Next18-pin)

HM7000-N18TXS: Bluetooth® & DCC Sound Decoder (Next18-pin)

Hornby HM7020: 15V Power Supply Adapter

HM7020: 15V Power Supply Adapter This Adapter allows you to use an existing power supply with the HM7000 system

Hornby HM7040: Bluetooth® Legacy Dongle

HM7040: Bluetooth® Legacy Dongle This connects to existing Hornby Select or Elite and allows non Bluetooth® decoders to be controlled via the HM7000 APP

Hornby HM7050 - Reverse Loop Module

HM7050 - Reverse Loop Module For use with HM7000 APP

Hornby HM7070 - Power Bank

HM7070 - Power Bank Stay-alive for use with HM7000 decoders

Hornby 15V~4 Amp Transformer (UK) + 15V Power Supply Adapter Bundle

15V~4 Amp Transformer (UK) + 15V Power Supply Adapter Bundle For use with HM7000 APP and HM7000 Decoders

Peco Flexi Loco Lift (Double) N,OO/HO,OO9/HOe,EM, TT Scale

Flexi Loco Lift (Double) N,OO/HO,OO9/HOe,EM, TT Scale Designed - To carry small to larger OO locomotives (steam tank engine or Diesel Shunter) or - Large N scale Locomotives and full rakes of trains - Width can be adjusted to suit your scale - Modular system means they can be stacked and extended to cater for your storage and operating needs - Scales  N,OO/HO,OO9/HOe,EM, TT.  

Bachmann E-Z Command 8 Pin To 21 Pin Adaptor

8 Pin To 21 Pin Adaptor Enables use of 8-pin deocder in 21-pin DCC Ready loco's

DCC Concepts Cobalt iP Digital Point Motor (Single)

Cobalt iP Digital Point Motor (Single) - Any Scale Includes: - 1x Digital Point motor - Instruction manual  - Product Size:   - Width 28.5mm (67mm over the mounting wings)   - Depth 40mm (48mm over the mounting wings)   - Height 44mm (67mm over the connector) - Bag of attachments Features: The Cobalt-iP Digital’s super-low static current draw means very low power bus loading and the Cobalt-iP Digital is also able to cope with a very wide range of DC or DCC power supply voltages. We prefer 9~12V regulated power for DC, but any DCC voltage from 7 to 23 volts is acceptable. Cobalt-iP Digital is supplied with the throw bar already centred for easy installation. You can activate and de-activate self-centring and even swap the throw direction with a simple software command. This allows easy matching to layout needs, software driven computer displays, track diagrams or computer control. With Cobalt-IP “Intelligent Power” Digital Motors, you also have all the connection versatility you could ever need already built in. Frog power needs only one added wire, and a totally separate SPDT changeover switch can facilitate interlocking, control of signal feather indicators or ground signals, etc. Cobalt iP Digital also features the ability to add panel switches or control via DCC. The connection terminals used for panel switch connection are also able to give direct high/low state computer or DCC system feedback, so one motor really CAN do it all. Add to the above the ability to work with DC and super-simple wiring or DCC operation, or to combine digital and analog control… and Cobalt iP Digital really is the best choice for all layouts, no matter how you choose to power the trains!

Bachmann Plux22 DCC Loco-Decoder (with Brake Button function) (36-570A)

Plux22 DCC Loco-Decoder (with Brake Button function) Features:  - A Plux22 (NEM658) DCC Decoder suitable for models fitted with a Plux22 DCC decoder socket.  - Multi-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin)) with Back EMF function - 11 function outputs (9 powered and 2 logic level) - 1.2A continuous load - Suitable for models equipped with DC motors (including coreless motors) - Dimension: 22mm x 15mm x 3.5mm

DCC Concepts DCS-MSET Mega Screw Set 16x 60 Vials (w/20 Drill Bit set)

Mega Screw Set 16x 60 Vials (w/20 Drill Bit set)   Mega set of 16 vials each containing 60 panhead (60x 1.0x3mm, 60x 1.0x5mm, 60x 1.0x8mm, 60x 1.5x4mm, 60x 1.5x6mm, 60x 1.5x8mm, 60x 2.0x5mm, & 60x 2.0x8mm) 60 countersunk screws (60x 1.0x3mm, 60x 1.0x5mm, 60x 1.0x8mm, 60x 1.5x4mm, 60x 1.5x6mm, 60x 1.5x8mm, 60x 2.0x5mm, & 60x 2.0x8mm) Set also comes with a 20 piece drillset with HSS titanium covered drills covering 0.3 to 1.6mm. NOTES - screws are now BLACK in colour            - Packaging can vary and might be slightly different from image

Model Maker N Scale Loco Crankpin Box Spanner

N Scale Loco Crankpin Box Spanner A handy addition to any N scale modeller’s tool kit, this Loco Crankpin Box Spanner is an essential tool for maintaining your cherished Graham Farish models. Made of machined metal, this tool is specially designed for removing the crankpins from Graham Farish steam locomotives, you can quickly and easily change the driving wheel traction tyres to keep your models in prime running condition for years to come.

DCC Concepts Cobalt SS Medium 600mm Extension Leads (3)

Cobalt SS Medium 600mm Extension Leads (3) Includes - Use these cables to control your Cobalt-SS motors in pairs, either both moving in the same direction, or moving opposite each other.

Bachmann 6 Pin 90° DCC Loco-Decoder

6 Pin 90° DCC Loco-Decoder  

Gaugemaster Black Wire (7 x 0.2mm) 100m

Black Wire (7 x 0.2mm) 100m This wire can be used for point motors, switches, track wiring and many other applications.

Bachmann 6 Pin Micro DCC Loco-Decoder (with Brake Button function)

6 Pin Micro DCC Loco-Decoder (with Brake Button function)

Slaters 1103 3mm Alphabet

3mm Alphabet Plastic Letters and Numbers Includes - Plastic moulded Alphabet and numbers - Ideal for Railway station signage and building names - Requires careful trimming off fret with craft knife - Can be stuck down with suitable plastic glue (poly cement) - N, TT, TT(1:120) and OO Scale

Slaters 1108 8mm Alphabet

8mm Alphabet Plastic letters and Numbers Includes - Plastic moulded Alphabet and numbers - Ideal for Railway station signage and building names - Requires careful trimming off fret with craft knife - Can be stuck down with suitable plastic glue (poly cement) - N, TT, TT(1:120), OO and O Scale

DCC Concepts DCD-ZNM.HP.6 Zen Black Decoder Midi-Sized 8PIN Harness 6 Fct

DCD-ZNM.HP.6 Zen Black Decoder Midi-Sized 8PIN Harness 6 Fct Includes – 3 Amps peak power– 1.5 Amps continuous RMS power– 6 functions (2x 250mA, 4x 100mA)– Size 30mm x 18.3mm x 6mm– 8-pin harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Brown-Out Protection on-board

DCC Concepts DCD-ZNmini.4 Zen Black Decoder Mini 8Pin

DCD-ZNmini.4 Zen Black Decoder Mini 8Pin Includes – 1.1 Amps peak power– 750mA continuous power– 4 functions at 100mA each– 19mm x 11mm x 6mm– 8-pin & harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Brown-Out Protection on-board– Stay-Alive connection

DCC Concepts DCD-ZBHP.6 Zen Black Buddha Decoder O & Larger Scale

DCD-ZBHP.6 Zen Black Buddha Decoder O & Larger Scale Includes  – 5 Amps peak power– 3 Amps continuous power– 6 functions at 250mA each– On-board high-power stay-alive– 42mm x 27mm x 13mm– 12 screw terminals– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)

DCC Concepts DCD-ZN68.2 Zen Blue+Decoder NEM651 6-Pin Direct/ Harness 2 Funct

DCD-ZN68.2 Zen Blue+Decoder NEM651 6-Pin Direct/ Harness 2 Funct Includes - 1.1Amps Peak Power - 750mA Continuous power - 2 Functions at 100mA each - Dimensions 13.5mm x 8.5mm - 6 PIN Direct, 6 PIN Harness and 8 PIN Harness - One step loco setup  

DCC Concepts DCC Decoder Convertor 3 Wire to 2 Wire (3)

DCC Decoder Convertor 3 Wire to 2 Wire (3) - Pack of three solenoid decoders. - The SDC is a clever wee device that takes the outputs from a 3-wire accessory decoder and turns them into a 2-wire reversing DC decoder, allowing you to use most solenoid accessory decoders to power Kato, Cobalt or other brands of point motor. - Please note that for motor drive decoders you will also need to set ‘power on’ time for between 2 and 4 seconds.

Bachmann Class 90 DCC Loco-Decoder w/Servo Motor Operation & Brake

A 21 Pin (21MTC) DCC Decoder configured for use in the Bachmann Branchline Class 90 – models produced from 2021 onwards. Configured to control the servo-motor-operated Pantograph. Highlights include: Dual-mode DCC/DC decoder with Back EMF function 1.2A continuous load Brake Button function for realistic control of braking Controls the servo-motor-operated Pantograph Default Functions when fitted to Bachmann Branchline Class 90 F0 - Direction Lights on/off F1 - Cab Lights (Directional) on/off F2 - Brake Button F3 - Day/Night Mode F4 - Direction Lights Off (Non-Pantograph End) F5 - Direction Lights Off (Pantograph End) F6 - Pantograph Up/Down

AE Model AED-6PD.2 6-PIN Direct Function Decoder

AED-6PD.2 6-PIN Direct Function Decoder - 2 Function Decoder

Bachmann 8 Pin Decoder Socket with Harness (x1)

Bachmann 8 Pin Decoder Socket with Harness (x1) Enables locomotives without decoder sockets to have an 8-pin decoder socket fixed to them. Socket Dimensions: 10mm x 10mm x 5mm Cable Length: 90mm cable

Gaugemaster Red/Black Twinned Wire (14 x 0.15mm) 10m

Red/Black Twinned Wire - Diameter (14 x 0.15mm) - Total length of cable is 10m - Ideal for track wiring needing two cables at a time.

Peco Flexi Loco Lift (Single)

Flexi Loco Lift (Single) Designed - To carry small OO locomotives (steam tank engine or Diesel Shunter) or - Large N scale Locomotives - Width can be adjusted to suit your scale - Modular system means they can be stacked and extended to cater for your storage and operating needs - Scales N (2mm) - TT (3mm) - OO (4mm)  

Gaugemaster White Wire (7 x 0.2mm) 10m

White Wire (7 x 0.2mm) 10m

Dapol Imperium 21 Pin 8 Function Decoder

Dapol - Imperium 21 Pin 8 Function Decoder

Hornby Digital Accessory and Point Decoder

Digital Accessory and Point Decode - Can only be used with Hornby Select and Elite Controllers - Powers 4 individual accessories - OO Scale

Hornby 4 Pin Decoder

4 Pin Decoder 

Gaugemaster Seep Point Motor with Built-In Switch

Seep Point Motor with Built-In Switch - Ideal for electrofrog points to change polarity at the same time as the tiebar - OO and N gauge

Gaugemaster Seep Point Motor with Latching Mechanism

Seep Point Motor with Latching Mechanism Seep Point Motors have the advantage of being easy to fix under the baseboard, requiring only a small slot to operate the point. The PM-4 is our best point motor for throwing points that have lost the over centre spring or are a bit heavy to move. It also features a change over switch for changing polarity and LEDs if required. Includes: - 1x GMC-PM4 Solenoid Motor - Instructions for installation and wiring - OO, O Scale   

Gaugemaster Precision Lubricator with Needle Applicator (10ml)

Precision Lubricator with Needle Applicator (10ml)

Gaugemaster Ruby Series 2fn Small DCC Decoder 8 Pin

Ruby Series 2fn Small DCC Decoder 8 Pin The DCC92 is a 8 pin decoder with a fitted 45mm harness between the pins and the decoder. An ideal decoder for retrofitting into non DCC Ready locomotives. Features: 2 Digit and 4 Digit Addressing 14, 28 or 128 Speed Steps Smooth Operation Constant Brightness Lighting Direct Mode Programming Motor Isolation Protection Advanced Consisting

Gaugemaster Ruby Series 2fn Standard DCC Decoder 21 Pin

Ruby Series 2fn Standard DCC Decoder 21 Pin Includes - 2 Digit and 4 Digit Addressing - 14, 28 or 128 Speed Steps - Smooth Operation - Constant Brightness Lighting - Direct Mode Programming - Motor Isolation Protection - Advanced Consisting - Socket to Add PowerPal - Current Rating 0.5Amps - Motor Rating 1.5 - 2 Amps

Hornby Standard Wall Plug Mains Transformer

Standard Wall Plug Mains Transformer - Input: 230v Mains - Output: 12v DC - OO Accessory

Hornby Standard 6 pin Decoder

Standard 6 pin Decoder  

Hornby Standard 8 pin Locomotive Decoder

Standard 8 pin Locomotive Decoder

Hornby Pocket Coupling (Pack 10)

Pocket Coupling (Pack 10) - OO scale

Hornby Point Motor

Solenoid Point Motor - Requires power and switch to operate (Sold individually) - OO scale

Hornby Point Motor Passing Contact Switch - Black

Point Motor Passing Contact Switch - For operating points and accessories - Black Colour - OO Accessory

Hornby Large Width Couplings (Pack 10)

Large Width Couplings (Pack 10) - OO scale

Hornby Medium Width Couplings (Pack 10)

Medium Width Couplings (Pack 10) - OO scale

Hornby NEM Couplings (Pack 10)

NEM Couplings (Pack 10) - OO scale

Gaugemaster Yellow Wire (7 x 0.2mm) 10m

Yellow Wire (7 x 0.2mm) 10m

Gaugemaster Twin Track Cased Controller

Twin Track Cased Controller Ideal for expanding the train set with the ability to control 2x locomotives independantly and power accessories - All in one controller with power lead wired - Sturdy Metal Casing - Accessory outputs ideal for point motors - Requires connecting to the mains via the socket - Suitable for N, OO and OO9 Gauges

Gaugemaster Wall Mounted Transformer 1 x 16v AC or 12v DC @ 0.75 Amps

Wall Mounted Transformer Ideal for smaller Layouts or powering point motors ad acessories Includes - Outputs: 1 x 16v AC and 12v DC - Current Rating: 0.75 Amps - Mains transformer  - Suitable for N,OO and OO9 Gauges

Dapol Imperium 21 Pin MTC 6 Function Decoder

Dapol - Imperium 21 Pin MTC 6 Function Decoder

Gaugemaster Single Track Walkabout Controller

Single Track Walkabout Controller Designed for those who wish to walk around there layouts or operate from afar - Designed to be wired with a Gaugemaster GM75 Plug and socket for panel mounting  - Can be powered via:  GMC-M1 Transformer, GMC-T1 Transformer, GMC-WM1 Transformer - Suitable for N,OO and OO9 Gauges

Gaugemaster COMBI Single Track Controller with Plug in Transformer

COMBI - Single Track Analogue Controller with Plug in Transformer Ideal for the beginner with a first train set or expanding on a current railway.  Includes - Hand held controller - Mains Transformer Technical: - Input: 230v Mains - Controlled Output: 12v DC - Accessory Output: 16v AC - Rating 1.1Amp - Suitable for N, OO, OO9 and (SMALL Dapol Locomotives) O Gauge

Peco Turnout Switch Module Add-on

Turnout Switch Module (add on) - This module clips into either PL50 or other PL51 Switch Module units - Designed so you can expand your switching requirements to your chosen design. - Peco Electrics

Peco Turntable Motor

Turntable motor and control system  Ideal for anyone updating an older motor drive or converting a manual drive turntable into electric. This is a "NON Indexing" motor system meaning it has no pre set alignment programs, offering ultimate flexibility without any rewiring of your layout. Includes - Motor Unit and fixing Lugs - Hand Held Controller - Wire and fixings  - Manual of instructions - Requires power supply from a 12VDC 2Amp Supply NOT included - OO and N Scale Peco Turntables

Peco Twin Micro Switch Kit - for fitting to turnout motor PL10

Twin Micro Switch Kit  - for fitting to turnout motor PL10

Peco Wheel Scraper

Wheel cleaning Scraper - Designed to clean your locomotive wheels and be used alongside PL42 wheel Cleaning Brush - Can be provided with an electrical charge (from your controller) to spin the locomotive wheels and rub off dirt as they turn round. - DO NOT use this brush on a locomotive fitted with traction tyres or on the wheels with traction tyres as you will rip and destroy the tyres 

Peco Wiring Loom

Wiring Loom

Peco Smart Frog

Smart Frog unit - Designed to change Polarity on Electrofrog points whilst using the PLS100 SmartSwitch Set

Peco Studs and Tag Washers - for use with probe

Studs and Tag Washers - for use with probe (PL17)

Peco Track Isolating Switch

Track Isolating Switch - Place between two sections of track to isolate one from the other - Used on Analogue railways to park up more than one locomotive on a section of track (like in engine sheds, station bay platforms)

Peco Turnout Motor (Extended Pin)

PL10E Extended Pin Solenoid Point Motor (Switch Machine) - Designed to attach to PL9 Mounting bases underneath the baseboard  - Pin might require cutting to length once installed (depending on baseboard thickness) - Requires fixing and electrical supply (12v DC for an accessory output) - Suitable for OO and N Scales

Peco Turnout Motor

PL-10 Turnout Solenoid Point Motor (Switch Machine) - Designed to attach to PL9 Mounting bases or directly underneath a Peco point - Requires fixing and electrical supply (12v DC for an accessory output) - Suitable for OO and N Scales

Peco Side-mounted Motor

PL11 Side-mounted Motor - Designed to be placed alongside Peco Points to throw the point rails - Can be used with Electrofrog points but another type of switch will be required to change the polarity - OO Gauge

Peco Probe for operating turnout motors (use with PL18)

Probe for operating turnout motors (use with PL18)

Peco Rail Cleaner - abrasive rubber block

Rail Cleaner - The abrasive block is rubbed along the top surface of the rails to clean any dirt that will stop/disturb electrical connection of your model locomotives/ accessories (thus leading to poor operation) - IMPORTANT not to press too hard on the track (always better to take a few passes with the rubber than in one go) - Always be gently around point work whilst cleaning otherwise you could damage the point blades and tie-bar (switch mechanism) 

Gaugemaster Red Wire (7 x 0.2mm) 10m

Red Wire (7 x 0.2mm) 10m

Peco PL1005 TwistLock Microswitch

PL1005 TwistLock Microswitch - Designed to be installed on a PL1000 Twistlock solenoid motor for use with Electrofrog Points - Wires can be either crimped on to the terminals or soldered  - Suitable for use with Electrofrog points

Peco PL38B Wire - Blue

PL38B Wire - Blue - 7 Metre Reel - 3 Amp Current Rating

Peco PL38BK Wire - Black

PL38BK Wire - Black - 7 Metre Reel - 3 Amp Current Rating

Peco PL38G Wire - Green

PL38G Wire - Green - 7 Metre Reel - 3 Amp Current Rating

Peco PL38R Wire - Red

PL-38R Wire - Red - 7 Metre Reel - 3 Amp Current Rating

Peco PL38Y Wire - Yellow

PL38Y Wire - Yellow - 7 Metre Reel - 3 Amp Current Rating

Gaugemaster Point Motor Wire Red/Green/Black Tripled (14 x 0.15) 10m

Point Motor Wire Red/Green/Black Tripled (14 x 0.15) 10m For use with Solenoid Point motors or SEEP Point motors

Peco Power Feed Joiners For C100 - C124 Rail (4 pairs)

Power Feeds - Designed for Code 100 OO Gauge track including (Setrack and Code 124 O Gauge Tracks) - 4 Pairs included

Peco Power Feed Joiners For C55 - C80 Rail (4 pairs)

Power Feeds - Designed for Code 55 and 80 N Gauge Tracks - 4 Pairs

Peco Power Feed Joiners For C70 - C75 - C83Rail (4 pairs)

Power Feeds - Designed for Code 75 OO Gauge Track (Including Code 70 and Code 83) - 4 Pairs

Peco Power-Lube - liquid lubricant and cleaner

Power Lube - For lubrication of your locomotives and working accessories - DO NOT put too much lube on locomotive axles when servicing (this will result in a static effect to dust and dirt particles and cause them to clog up moving parts)

Peco On-Off Switch (style matches PL26 series)

On-Off Switch (style matches PL26 series)

Peco On-On Changeover Switch (style matches PL26 series)

On-On Changeover Switch (style matches PL26 series)

Peco Passing Contact Switch - Black Lever

Passing Contact Switch - Black Lever

Peco Passing Contact Switch - Red Lever

Passing Contact Switch - Red Lever

Peco Passing Contact Switch - White Lever

Passing Contact Switch - White Lever

Peco Passing Contact Switch - Yellow Lever

Passing Contact Switch - Yellow Lever

Gaugemaster Pink Wire (7 x 0.2mm) 10m

Pink Wire (7 x 0.2mm) 10m

Peco PL1000 TwistLock Motor

PL1000 TwistLock Motor - Designed to make attachment under a baseboard easier. Includes: - template to align the Solenoid motor in position easily - Self tapping screws - Suitable for N up to O Gauge

Peco Four Pole Double Throw Toggle Switch (for use with SL-E383F)

Four Pole Double Throw Toggle Switch (for use with SL-E383F)

Gaugemaster Green Wire (7 x 0.2mm) 10m

Green Wire (7 x 0.2mm) 10m

Gaugemaster Grey Wire (7 x 0.2mm) 10m

Grey Wire (7 x 0.2mm) 10m

Peco LEDs 10 Green - 10 Red - & 20 Panel Clips

LEDs 10 Green - 10 Red - & 20 Panel Clips

Peco Loco Servicing Cradle - for N - OO/HO & OO-9

Locomotive Servicing Cradle - Foam tray designed to carefully hold your chosen model whilst you perform Maintenance 

Peco Microswitch enclosed type

Microswitch enclosed type - Designed to fit into O Gauge points in the tie-bar housing  - The switch is designed to operate the polarity of electrofrog point work

Peco Microswitch Housing - (for SLE790BH)

Microswitch Housing - (for SLE790BH)

Peco Motor Adaptor

Motor Adaptor - For fitting to PL10 Point motors  - OO Scale

Peco Mounting Plates for use with PL10

Mounting Plates - Designed for solenoid Point motor PL10E (extended Pin Motor) for underneath the baseboard mounting - The point motor sits into the mounting plate via the extended legs on the motor (these are than twisted using fine pliers or tweezers to secure motor to the mounting plate) - Comes with self tapping wood screws to secure mounting plate to baseboard

Gaugemaster 16v AC Cased Transformer

16v AC Cased Transformer - All metal cased transformer for powering Panel mounted controllers - Input Power: 230v Mains - OutPut: 2x 16v AC  - Output Rating: 1Amp

Peco Accessory Switch - for fitting to turnout motor PL10

Accessory Switch (mounts on top of PL10 and PL10E Point motors) - Designed to change the polarity of Electrofrog points - OO Gauge

Peco Adaptor Base - Self Assemble No Spring

Adaptor Base  for PL10 point motors - Self Assemble No Spring - For use with self latching points - OO Gauge 

Gaugemaster Black Wire (7 x 0.2mm) 10m

Black Wire (7 x 0.2mm) 10m

Gaugemaster Blue Wire (7 x 0.2mm) 10m

Blue Wire (7 x 0.2mm) 10m

Peco Cable Clips - self adhesive

Cable Clips - self adhesive - Help tidy and neaten wiring under your railway 

Gaugemaster Capacitor Discharge Unit

Capacitor Discharge Unit This device is for operating electrical point Solenoid motors and accessories - Requires wiring to a 16- 24v AC Supply in order to use. - Suitable for N, OO Gauge and O Gauge accessories

Peco Capacitor Discharge Unit (CDU)

Capacitor Discharge Unit (CDU) - This device is for use with Solenoid Point motors (PL10 / PL10E/ PL11) - The CDU is designed to store and release electrical power. When you switch your point blades (via switch like PL26 R/B/W/Y), the extra power ensures the blades throw properly every time. - The CDU requires a 16V Accessory out put either from your controller or via a separate accessory transformer (recommend Gaugemaster GMC WM1 Wall mounted transformer)  

Peco Connectors/Shrouds 10 connectors - 5 shrouds

Connectors/Shrouds Includes - 10 Connectors - 5 shrouds Designed to join on the terminals of Point Motors (PL10/ PL10E etc) to eliminate soldering