Gaugemaster Black Wire (7 x 0.2mm) 100m

Black Wire (7 x 0.2mm) 100m This wire can be used for point motors, switches, track wiring and many other applications.

Gaugemaster Red/Black Twinned Wire (14 x 0.15mm) 10m

Red/Black Twinned Wire - Diameter (14 x 0.15mm) - Total length of cable is 10m - Ideal for track wiring needing two cables at a time.

Gaugemaster White Wire (7 x 0.2mm) 10m

White Wire (7 x 0.2mm) 10m

Gaugemaster Seep Point Motor with Built-In Switch

Seep Point Motor with Built-In Switch - Ideal for electrofrog points to change polarity at the same time as the tiebar - OO and N gauge

Gaugemaster Seep Point Motor with Latching Mechanism

Seep Point Motor with Latching Mechanism Seep Point Motors have the advantage of being easy to fix under the baseboard, requiring only a small slot to operate the point. The PM-4 is our best point motor for throwing points that have lost the over centre spring or are a bit heavy to move. It also features a change over switch for changing polarity and LEDs if required. Includes: - 1x GMC-PM4 Solenoid Motor - Instructions for installation and wiring - OO, O Scale   

Gaugemaster Precision Lubricator with Needle Applicator (10ml)

Precision Lubricator with Needle Applicator (10ml)

Gaugemaster Ruby Series 2fn Small DCC Decoder 8 Pin

Ruby Series 2fn Small DCC Decoder 8 Pin The DCC92 is a 8 pin decoder with a fitted 45mm harness between the pins and the decoder. An ideal decoder for retrofitting into non DCC Ready locomotives. Features: 2 Digit and 4 Digit Addressing 14, 28 or 128 Speed Steps Smooth Operation Constant Brightness Lighting Direct Mode Programming Motor Isolation Protection Advanced Consisting

Gaugemaster Ruby Series 2fn Standard DCC Decoder 21 Pin

Ruby Series 2fn Standard DCC Decoder 21 Pin Includes - 2 Digit and 4 Digit Addressing - 14, 28 or 128 Speed Steps - Smooth Operation - Constant Brightness Lighting - Direct Mode Programming - Motor Isolation Protection - Advanced Consisting - Socket to Add PowerPal - Current Rating 0.5Amps - Motor Rating 1.5 - 2 Amps

Gaugemaster Yellow Wire (7 x 0.2mm) 10m

Yellow Wire (7 x 0.2mm) 10m

Gaugemaster Twin Track Cased Controller

Twin Track Cased Controller Ideal for expanding the train set with the ability to control 2x locomotives independantly and power accessories - All in one controller with power lead wired - Sturdy Metal Casing - Accessory outputs ideal for point motors - Requires connecting to the mains via the socket - Suitable for N, OO and OO9 Gauges

Gaugemaster Wall Mounted Transformer 1 x 16v AC or 12v DC @ 0.75 Amps

Wall Mounted Transformer Ideal for smaller Layouts or powering point motors ad acessories Includes - Outputs: 1 x 16v AC and 12v DC - Current Rating: 0.75 Amps - Mains transformer  - Suitable for N,OO and OO9 Gauges

Gaugemaster Single Track Walkabout Controller

Single Track Walkabout Controller Designed for those who wish to walk around there layouts or operate from afar - Designed to be wired with a Gaugemaster GM75 Plug and socket for panel mounting  - Can be powered via:  GMC-M1 Transformer, GMC-T1 Transformer, GMC-WM1 Transformer - Suitable for N,OO and OO9 Gauges

Gaugemaster COMBI Single Track Controller with Plug in Transformer

COMBI - Single Track Analogue Controller with Plug in Transformer Ideal for the beginner with a first train set or expanding on a current railway.  Includes - Hand held controller - Mains Transformer Technical: - Input: 230v Mains - Controlled Output: 12v DC - Accessory Output: 16v AC - Rating 1.1Amp - Suitable for N, OO, OO9 and (SMALL Dapol Locomotives) O Gauge

Gaugemaster Red Wire (7 x 0.2mm) 10m

Red Wire (7 x 0.2mm) 10m

Gaugemaster Point Motor Wire Red/Green/Black Tripled (14 x 0.15) 10m

Point Motor Wire Red/Green/Black Tripled (14 x 0.15) 10m For use with Solenoid Point motors or SEEP Point motors

Gaugemaster Orange Wire (7 x 0.2mm) 10m

Orange Wire (7 x 0.2mm) 10m

Gaugemaster Pink Wire (7 x 0.2mm) 10m

Pink Wire (7 x 0.2mm) 10m

Gaugemaster Green Wire (7 x 0.2mm) 10m

Green Wire (7 x 0.2mm) 10m

Gaugemaster Grey Wire (7 x 0.2mm) 10m

Grey Wire (7 x 0.2mm) 10m

Gaugemaster 16v AC Cased Transformer

16v AC Cased Transformer - All metal cased transformer for powering Panel mounted controllers - Input Power: 230v Mains - OutPut: 2x 16v AC  - Output Rating: 1Amp

Gaugemaster Black Wire (7 x 0.2mm) 10m

Black Wire (7 x 0.2mm) 10m

Gaugemaster Blue Wire (7 x 0.2mm) 10m

Blue Wire (7 x 0.2mm) 10m

Gaugemaster Capacitor Discharge Unit

Capacitor Discharge Unit This device is for operating electrical point Solenoid motors and accessories - Requires wiring to a 16- 24v AC Supply in order to use. - Suitable for N, OO Gauge and O Gauge accessories