Bachmann 21 Pin DCC Loco-Decoder (with Brake Button function)

21 Pin DCC Loco-Decoder (with Brake Button function) A 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket (do not use with the Bachmann Branchline Class 90 – use 36-569A with these models). This decoder replaces item No. 36-557 and can be used in any model for which item No. 36-557 is recommended Highlights include: Dual-mode DCC/DC decoder with Back EMF function 10 powered function outputs (+8 logic level outputs and 2 logic level/SUSI outputs) 1.5A continuous load RailComPlus® for automatic registration when used with selected DCC systems Suitable for models equipped with DC motors (including coreless motors) Brake Button function for realistic control of braking (operates on F2) Operating Modes: NMRA/DCC with 14, 28 and 128 speed steps Short and Long addresses DCC and DC operation (DC operation is de-selectable) Automatic recognition of operational mode and DCC speed step selection Supports Lenz® LG 100 braking sections Supports ABC braking sections Motor Control Features Suitable for models equipped with DC motors (including coreless motors) 1.5A continuous load Motor regulation with pulse width frequency from 10kHz to 50kHz Motor output overload protection; Back EMF (de-selectable) Function Outputs: 10 powered function outputs with overload protection (4 via 21MTC pins, 6 via solder pads) 10 logic level outputs (8 via 21MTC pins, 2 via solder pads) 250mA load per output 500mA total load of all function outputs 2 additional logic outputs Shunting speed and momentum key selectable Brake Button function for realistic control of braking (operates on F2) Dimensions: 21.4mm x 15.5mm x 4.5mm Default Address: Address 3 Programming: DCC Service Mode & DCC PoM (Programming on Main) Additional Features: RailCom® Feedback system RailComPlus® automatic Registration

Bachmann E-Z Command 8 Pin To 21 Pin Adaptor

8 Pin To 21 Pin Adaptor Enables use of 8-pin deocder in 21-pin DCC Ready loco's

Bachmann Plux22 DCC Loco-Decoder (with Brake Button function) (36-570A)

Plux22 DCC Loco-Decoder (with Brake Button function) Features:  - A Plux22 (NEM658) DCC Decoder suitable for models fitted with a Plux22 DCC decoder socket.  - Multi-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin)) with Back EMF function - 11 function outputs (9 powered and 2 logic level) - 1.2A continuous load - Suitable for models equipped with DC motors (including coreless motors) - Dimension: 22mm x 15mm x 3.5mm

Bachmann 6 Pin 90° DCC Loco-Decoder

6 Pin 90° DCC Loco-Decoder  

Bachmann 6 Pin Micro DCC Loco-Decoder (with Brake Button function)

6 Pin Micro DCC Loco-Decoder (with Brake Button function)

Bachmann Class 90 DCC Loco-Decoder w/Servo Motor Operation & Brake

A 21 Pin (21MTC) DCC Decoder configured for use in the Bachmann Branchline Class 90 – models produced from 2021 onwards. Configured to control the servo-motor-operated Pantograph. Highlights include: Dual-mode DCC/DC decoder with Back EMF function 1.2A continuous load Brake Button function for realistic control of braking Controls the servo-motor-operated Pantograph Default Functions when fitted to Bachmann Branchline Class 90 F0 - Direction Lights on/off F1 - Cab Lights (Directional) on/off F2 - Brake Button F3 - Day/Night Mode F4 - Direction Lights Off (Non-Pantograph End) F5 - Direction Lights Off (Pantograph End) F6 - Pantograph Up/Down

Bachmann 8 Pin Decoder Socket with Harness (x1)

Bachmann 8 Pin Decoder Socket with Harness (x1) Enables locomotives without decoder sockets to have an 8-pin decoder socket fixed to them. Socket Dimensions: 10mm x 10mm x 5mm Cable Length: 90mm cable

Bachmann Next18 DCC Loco-Decoder (with Brake Button function)

Bachmann Next18 DCC Loco-Decoder (with Brake Button function) - F2 on your DCC controller will activate break function (in the case of sound fitted locomotives you will hear brake sounds too) - Pressing F2 down will bring the locomotive to a complete standstill