Graham Farish Class 47/0 D1601 BR Green (Small Yellow Panels)

Class 47/0 D1601 BR Green (Small Yellow Panels) The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. This model tells the story of the Class’s early days of service, sporting original features and carrying the iconic two-tone green livery in which the majority of the fleet was outshopped, complete with small yellow warning panels at either end. Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Detail Specific To This Model: Pristine BR Green (Small Yellow Panels) livery Running No. D1601 Glazed Headcode Panels Displaying Blinds 1V54 and 1A92 Twin Arm Windscreen Wipers High Intensity Headlight Round Buffers Bodyside Step below Cab Door Full Cab Roof Vents Original Three-Piece Radiator Grilles Ribbed Exhaust Panels Spanner Mk3 Roof Boiler Port 1,250 Gallon Water Tanks with Water Chutes Open Bogie-mounted Cab Steps - Era 5 - N Scale

Graham Farish Class 47/0 D1565 BR Green (Small Yellow Panels)

Class 47/0 D1565 BR Green (Small Yellow Panels) The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. This model tells the story of the Class’s early days of service, sporting original features and carrying the iconic two-tone green livery in which the majority of the fleet was outshopped, complete with small yellow warning panels at either end. Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Detail Specific To This Model: Pristine BR Green (Small Yellow Panels) livery Running No. D1565 Glazed Headcode Panels Displaying Blinds 1E11 and 4N09 Twin Arm Windscreen Wipers High Intensity Headlight Round Buffers Bodyside Step below Cab Door Full Cab Roof Vents Original Three-Piece Radiator Grilles Ribbed Exhaust Panels Spanner Mk3 Roof Boiler Port 1,250 Gallon Water Tanks with Water Chutes Open Bogie-mounted Cab Steps - Era 5 - N Scale

Graham Farish Class 47/8 47849 BR InterCity (Swallow) (N)

Class 47/8 47849 BR InterCity (Swallow)  The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, resulting in various sub-classes being used to group locomotives that had undergone the same work, or were built with similar features, such as the Class 47/4s which were those locomotives fitted with Electric Train Heating (ETH). Whilst not an official sub-class, some Class 47/4s were fitted with extended range fuel tanks allowing them to work longer distances and such machines were identified by being renumbered into the 478xx series. With their larger fuel tanks, these Class 47s were put to work on cross country routes and following Privatisation, the 47/8s were used by Virgin Cross Country. No. 47849 received its extended range fuel tanks in 1990 and was renumbered from 47570, remaining in InterCity livery long into Privatisation before it was repainted into Virgin colours in 2000 and so making this locomotive suitable for both Era 8 and Era 9 operations. Our new InterCity model takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR InterCity (Swallow) livery Running No. 47849 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cut-Cab Locomotive Cab-Front-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Kickplate below Car Door Partially Plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish Class 47/4 47555 'The Commonwealth Spirit' RF Distribution (N)

Class 47/4 47555 'The Commonwealth Spirit' BR RF Distribution European The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s served on the front line of BR services for many decades and even in the 1990s, some 30+ years after their introduction, they were still being used for top link services, like hauling the Royal Train or in this case, as part of the fleet used for freight services via the then brand new Channel Tunnel linking the UK and the mainland Europe. The Railfreight Distribution European livery, as distinguished by the large lettering on the bodyside and blue roof, was introduced in the mid-1990s and was applied to distinguish those locomotives allocated to traffic flows serving Dollands Moor and the Channel Tunnel Freight Services, which used the Channel Tunnel from its opening in 1994. Class 47/4 No. 47555 ‘The Commonwealth Spirit’, which was something of a celebrity with spotters and enthusiasts, was one of the locomotives selected for this pool and was repainted resplendently into the new livery by Tinsley which added its Yorkshire Rose depot motif to the cab sides in the process. ‘The Commonwealth Spirit’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR Railfreight Distribution European livery Running No. 47555 Named ‘The Commonwealth Spirit’ Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Spanner Mk3 Boiler Port Water Tanks Removed NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish Class 47/7 47712 'Lady Diana Spencer' BR ScotRail (N)

Class 47/7 47712 'Lady Diana Spencer' BR ScotRail The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, and the Class 47/7 sub-class is just one example – these locomotives being fitted with extended range fuel tanks and cab-front jumper cables to work push-pull trains in Scotland. No. 47712 ‘Lady Diana Spencer’ was one of the first twelve locomotives converted to a 47/7, having entered works as Class 47/4 No. 47505, and is modelled in the striking BR ScotRail livery with bold grey, white and blue bodyside bands and large yellow ends and cab rooves. The real locomotive survives in preservation today, and has recently been returned to service on the main line, in much the same 1980s condition as depicted by our model. ‘Lady Diana Spencer’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR ScotRail livery Running No. 47712 Named ‘Lady Diana Spencer’ Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Scottish Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish LMS 10000 BR Green (Late Crest)

LMS 10000 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodyside Steps Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LMS 10001 BR Green (Late Crest)

LMS 10001 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LNER V2 60845 BR Lined Black (Early Emblem) (N)

LNER V2 60845 BR Lined Black (Early Emblem) Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine BR Lined Black Early Emblem livery Running No. 60845 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes BR Smokebox Door with Numberplate and with Higher Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 60847 St Peter's School BR Lined Green (Late Crest)

LNER V2 60847 'St Peter's School' BR Lined Green (Late Crest) 60847 Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine BR Lined Green Late Crest livery Running No. 60847 Named ‘St Peter’s School’ Separate Cylinders with Outside Steam Pipes BR Smokebox Door with Numberplate and with Higher Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/High-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 4791 LNER Lined Green (Original) (N)

LNER V2 4791 LNER Lined Green (Original)  Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine LNER Lined Green (Original) livery Running No. 4791 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes LNER Smokebox Door without Numberplate and with Lower Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LMS 10001 BR Lined Green (Late Crest) 10001

LMS 10001 BR Lined Green (Late Crest) 10001 The Graham Farish model of No. 10001 is a highly detailed masterpiece in miniature, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of the prototype, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a coreless motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. The Next18 DCC decoder socket and a pre-fitted speaker make it easy to equip these models for DCC and even add sound, or why not opt for our SOUND FITTED model and enjoy realistic sound effects straight out of the box – whether you’re running on analogue or DCC! Coupled with No. 10000, the LMS Twins will make the perfect addition to any early-BR layout. Features: Pristine BR Lined Green (Late Crest) livery Running No. 10001 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - Era 5 - N Scale

Graham Farish Class 158 2-Car DMU 158729, ScotRail Saltire

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine ScotRail Saltire livery Running No. 158729 Two-Car Unit comprising car Nos. 52729 & 57729 Destination blinds for Dundee Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Radio Pod on Roof Revised Air Conditioning (Type B) Toilet Discharge via CET Tank Cummins Engine Revised Heather Scottish Air Dam Sanding Gear Fitted Revised LED Light Cluster Plated Gangway Doors - Era 9 - N Scale

Graham Farish Class 158 2-Car DMU 158824 Arriva Trains Wales (Revised)

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine Arriva Trains Wales (Revised) livery Running No. 158824 Two-Car Unit comprising car Nos. 52824 & 57824 Destination blinds for Aberystwyth Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Radio Pod on Roof Revised Air Conditioning (Type A) Toilet Discharge via CET Tank Cummins Engine Revised Heather Scottish Air Dam Sanding Gear Fitted Revised LED Light Cluster Plated Gangway Doors - Era 9 - N Scale

Graham Farish Class 158 2-Car DMU 158750 GWR Green (FirstGroup)

Class 158 2-Car DMU 158750 GWR Green (FirstGroup) Includes: - Pristine GWR (FirstGroup) livery - Running No. 158750 - Two-Car Unit comprising car Nos. 52750 & 57750 - Destination blinds for Penzance - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type A) - Toilet Discharge via CET Tank - Cummins Engine - Revised Heather - Scottish Air Dam - Sanding Gear Fitted - Revised LED Light Cluster - Plated Gangway Doors Lighting: - Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control - Cab and saloon interior lighting, switchable on/off via the under-chassis switches - Authentic light colours and temperatures selected for each model based on era and application DCC: - Next18 DCC decoder interface – one decoder required per unit - Easy-access DCC decoder socket located behind removable panel on underside of DMS (B) Sound: - Speaker installed in all models for optimum sound reproduction - Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - SOUND FITTED models operate on DCC and Analogue control as supplied Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours - Era 9 - N Scale

Graham Farish Class 158 2-Car DMU 158711 ScotRail Saltire

Class 158 2-Car DMU 158711 ScotRail Saltire Includes: - Pristine ScotRail Saltire livery - Running No. 158711 - Two-Car Unit comprising car Nos. 52711 & 57711 - Destination blinds for Edinburgh Waverley - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate)   Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type B) - Toilet Discharge via CET Tank - Cummins Engine - Revised Heather - Scottish Air Dam - Sanding Gear Fitted - Revised LED Light Cluster - Plated Gangway Doors   Lighting: Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application   DCC: Next18 DCC decoder interface – one decoder required per unit Easy-access DCC decoder socket located behind removable panel on underside of DMS (B)   Sound: - Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions SOUND FITTED models operate on DCC and Analogue control as supplied   Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours  

Graham Farish Class 158 2-Car DMU 158766 GWR Green (FirstGroup)

Class 158 2-Car DMU 158766 GWR Green (FirstGroup) Includes: - Pristine GWR (FirstGroup) livery - Running No. 158766 - Two-Car Unit comprising car Nos. 52766 & 57766 - Destination blinds for Bristol Temple Meads - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate)   Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type A) - Toilet Discharge via CET Tank - Cummins Engine - Revised Heather - Scottish Air Dam - Sanding Gear Fitted - Revised LED Light Cluster - Plated Gangway Doors   Lighting: Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application   DCC: Next18 DCC decoder interface – one decoder required per unit Easy-access DCC decoder socket located behind removable panel on underside of DMS (B)   Sound: - Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions SOUND FITTED models operate on DCC and Analogue control as supplied   Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours  

Graham Farish LMS Ivatt 2MT 6418 LMS Black

LMS Ivatt 2MT 6418 LMS Black The popular LMS Ivatt 2MT returns to the Graham Farish N scale range following upgrades to allow SOUND FITTED models to be offered for the first time. With every model now featuring a Next18 DCC decoder interface and pre-fitted speaker. This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times.  MODEL FEATURES: - Pristine LMS Black livery - Running No. 6418 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Length 112mm - Era 3 - N Scale

Graham Farish LMS Ivatt 2MT 46447 BR Lined Black (Late Crest)

LMS Ivatt 2MT 46447 BR Lined Black (Late Crest) The popular LMS Ivatt 2MT returns to the Graham Farish N scale range following upgrades to allow SOUND FITTED models to be offered for the first time. With every model now featuring a Next18 DCC decoder interface and pre-fitted speaker. This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times.  MODEL FEATURES: - Locomotive is now Preserved - Pristine BR Lined Black (Late Crest) livery - Running No. 46447 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Length 112mm - Era 5 - N Scale