Dapol NER Class E1 (LNER J72) '2173' NER Lined Black (N)

NER Class E1 (LNER J72) '2173' NER Lined Black First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '2183' LNER Pre-War Black (N)

LNER J72 '2183' LNER Pre-War Black First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68723' BR Black (Early) (Newcastle Station Pilot) (N)

LNER J72 '68723' BR Black (Early) (Newcastle Station Pilot) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68736' BR Lined Apple Green (York Station Pilot) (N)

LNER J72 '68736' BR Lined Apple Green (York Station Pilot) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68745' BR Black (Early) (N)

LNER J72 '68745' BR Black (Early) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '69007' BR Black (Late) (N)

LNER J72 '69007' BR Black (Late) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '69023' BR Lined Apple Green (Preserved) (N)

LNER J72 '69023' BR Lined Apple Green (Preserved)  First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '8680' LNER Lined Green (N)

LNER J72 '8680' LNER Lined Green First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Graham Farish LNER V2 4791 LNER Lined Green (Original) DCC Sound Fitted

LNER V2 4791 LNER Lined Green (Original) 4791 DCC Sound Fitted Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine LNER Lined Green (Original) livery Running No. 4791 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes LNER Smokebox Door without Numberplate and with Lower Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 60845 BR Lined Black (Early Emblem) (N)

LNER V2 60845 BR Lined Black (Early Emblem) Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine BR Lined Black Early Emblem livery Running No. 60845 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes BR Smokebox Door with Numberplate and with Higher Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 60845 BR Lined Black (Early Emblem) DCC S/F

LNER V2 60845 BR Lined Black (Early Emblem) 60845 DCC Sound Fitted Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine BR Lined Black Early Emblem livery Running No. 60845 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes BR Smokebox Door with Numberplate and with Higher Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 60847 St Peter's School BR Lined Green (Late Crest)

LNER V2 60847 'St Peter's School' BR Lined Green (Late Crest) 60847 Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine BR Lined Green Late Crest livery Running No. 60847 Named ‘St Peter’s School’ Separate Cylinders with Outside Steam Pipes BR Smokebox Door with Numberplate and with Higher Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/High-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 4791 LNER Lined Green (Original) (N)

LNER V2 4791 LNER Lined Green (Original)  Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine LNER Lined Green (Original) livery Running No. 4791 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes LNER Smokebox Door without Numberplate and with Lower Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale