EFE Rail Class 23 'Baby Deltic' Headcode Box D5901 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5901 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: With TOPS panel applied before moving to the Railway Technical Centre Pristine BR Green (Small Yellow Panels) livery Running No. D5901 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5903 BR Green (FYE) (N)

Class 23 'Baby Deltic' Headcode Box D5903 BR Green (FYE) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Full Yellow Ends) livery Running No. D5903 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5905 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5905 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Small Yellow Panels) livery Running No. D5905 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5908 BR Green (FYE) (N)

Class 23 'Baby Deltic' Headcode Box D5908 BR Green (FYE) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Full Yellow Ends) livery Running No. D5908 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5909 BR Blue (N)

Class 23 'Baby Deltic' Headcode Box D5909 BR Blue Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Blue livery Running No. D5909 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5902 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5902 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5902 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5906 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5906 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5906 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5907 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5907 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5907 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5909 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5909 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5909 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5900 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5900 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Small Yellow Panels) livery Running No. D5900 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

Gaugemaster Collection Class 56 '56031' "Merehead" BR Dutch Departmental (N)

Class 56 '56031' "Merehead" BR Dutch Departmental The British Rail Class 56 is a type of diesel locomotive designed for heavy freight work. It is a Type 5 locomotive, with a Ruston-Paxman power unit developing 3,250 bhp (2,423 kW), and has a Co-Co wheel arrangement. Enthusiasts nicknamed them "Gridirons" (or "Grids" for short), due to the grid like horn cover on the locomotive's cab ends fitted to nos. 56056 onwards. Under its Romanian railway factory nomenclature, the locomotive was named Electroputere LDE 3500, with LDE coming from Locomtiva Diesel-Electrica (Diesel-Electric locomotive) and the 3500 being the planned horsepower output. The Class 56 fleet was introduced between 1976 and 1984, a total of 135 examples were manufactured. The first 30 locomotives (56001 - 56030, factory classification LDE3500) were built by Electroputere in Romania, but these typically suffered from poor construction standards and many were withdrawn from service early for extensive rebuilding before re-entering revenue service.[3] The remaining 105 locomotives were built by British Rail Engineering Limited (BREL) at Doncaster Works (56031 to 56115) and Crewe Works (56116 to 56135). 1:148 Scale model of a Class 56 diesel locomotive decorated in Railfreight Metals livery. These models have been specially commissioned by Gaugemaster and form part of the Gaugemaster Collection Series. These models feature lots of era specific details and markings and lots of external body details as modelled on the prototype. Features: NEXT-18 DCC Decoder Socket Gaugemaster Limited Edition Detailed body with etched grills and separately fitted hand rails Darkened wheels and pin point bearings Split frame tungsten chassis 5 Pole motor for smoother operation All wheel drive All Wheel pick up Includes etched brass name and number plates Directional lighting NEM couplings Includes both standard and knuckle couplings Includes spares bag with additional detailing parts - N Scale

Gaugemaster Collection Class 56 '56032' "County of South Glamorgan" RF Metals (N)

Class 56 '56032' "County of South Glamorgan" RF Metals  The British Rail Class 56 is a type of diesel locomotive designed for heavy freight work. It is a Type 5 locomotive, with a Ruston-Paxman power unit developing 3,250 bhp (2,423 kW), and has a Co-Co wheel arrangement. Enthusiasts nicknamed them "Gridirons" (or "Grids" for short), due to the grid like horn cover on the locomotive's cab ends fitted to nos. 56056 onwards. Under its Romanian railway factory nomenclature, the locomotive was named Electroputere LDE 3500, with LDE coming from Locomtiva Diesel-Electrica (Diesel-Electric locomotive) and the 3500 being the planned horsepower output. The Class 56 fleet was introduced between 1976 and 1984, a total of 135 examples were manufactured. The first 30 locomotives (56001 - 56030, factory classification LDE3500) were built by Electroputere in Romania, but these typically suffered from poor construction standards and many were withdrawn from service early for extensive rebuilding before re-entering revenue service.[3] The remaining 105 locomotives were built by British Rail Engineering Limited (BREL) at Doncaster Works (56031 to 56115) and Crewe Works (56116 to 56135). 1:148 Scale model of a Class 56 diesel locomotive decorated in Railfreight Metals livery. These models have been specially commissioned by Gaugemaster and form part of the Gaugemaster Collection Series. These models feature lots of era specific details and markings and lots of external body details as modelled on the prototype. Features: NEXT-18 DCC Decoder Socket Gaugemaster Limited Edition Detailed body with etched grills and separately fitted hand rails Darkened wheels and pin point bearings Split frame tungsten chassis 5 Pole motor for smoother operation All wheel drive All Wheel pick up Includes etched brass name and number plates Directional lighting NEM couplings Includes both standard and knuckle couplings Includes spares bag with additional detailing parts - N Scale

Dapol Class 66 '66001' DB Cargo (N)

Class 66 '66001' DB Cargo  The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor      All wheel pickup              All wheel drive via re-worked smooth drive low maintenance mechanism              Die-cast chassis             DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled                 Independent directional front/rear cab lighting control           Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets     Standard NEM fitting N Gauge couplers              RP 25 wheels     Newly tooled highly detailed body and fittings   Accessory bag with etched nameplates and detailed buffer beam fittings         Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66096' EWS (N)

Class 66 '66096' EWS The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor      All wheel pickup              All wheel drive via re-worked smooth drive low maintenance mechanism              Die-cast chassis             DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled                 Independent directional front/rear cab lighting control           Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets     Standard NEM fitting N Gauge couplers              RP 25 wheels     Newly tooled highly detailed body and fittings   Accessory bag with etched nameplates and detailed buffer beam fittings         Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66531' Freightliner Racing Green (N)

Class 66 '66531' Freightliner Racing Green The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66706' "Nene Valley" GBRf Europorte (N)

Class 66 '66706' "Nene Valley" GBRf Europorte The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66734' "Platinum Jubilee" GBRf Jubilee Pink (N)

Class 66 '66734' "Platinum Jubilee" GBRf Jubilee Pink The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66779' "Evening Star" GBRf BR Lined Green (N)

Class 66 '66779' "Evening Star" GBRf BR Lined Green The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Gaugemaster Collection Class 66 '66793' GBRf Railfreight Construction (N)

Class 66 '66793' GBRf Railfreight Construction 1:148 Scale model of a Class 66 Diesel Locomotive decorated in Railfreight Petroleum livery. This model features lots of expertly applied details as based on the prototype, a high level of body detail and excellent running characteristics. Features: Analogue DC Model NEM Couplings Pristine Finish Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control) Two cab window designs modelled Removable self-centring close coupling mechanism with NEM pockets RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting All Factory fitted DCC Locomotives will be fitted with Dapol’s new Imperium Next 18 decoder - N Scale

Gaugemaster Collection Class 66 '66794' "Steve Hannam" GBRf Railfreight Petroleum (N)

Class 66 '66794' "Steve Hannam" GBRf Railfreight Petroleum 1:148 Scale model of a Class 66 Diesel Locomotive decorated in Railfreight Petroleum livery. This model features lots of expertly applied details as based on the prototype, a high level of body detail and excellent running characteristics. Features: Analogue DC Model NEM Couplings Pristine Finish Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control) Two cab window designs modelled Removable self-centring close coupling mechanism with NEM pockets RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting All Factory fitted DCC Locomotives will be fitted with Dapol’s new Imperium Next 18 decoder - N Scale

Dapol Class 66 '66846' Colas Rail Freight (N)

Class 66 '66846' Colas Rail Freight The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Graham Farish LMS 10000 BR Green (Late Crest)

LMS 10000 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodyside Steps Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LMS 10001 BR Green (Late Crest)

LMS 10001 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale