EFE Rail Class 23 'Baby Deltic' Headcode Box D5901 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5901 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: With TOPS panel applied before moving to the Railway Technical Centre Pristine BR Green (Small Yellow Panels) livery Running No. D5901 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5903 BR Green (FYE) (N)

Class 23 'Baby Deltic' Headcode Box D5903 BR Green (FYE) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Full Yellow Ends) livery Running No. D5903 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5905 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5905 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Small Yellow Panels) livery Running No. D5905 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5908 BR Green (FYE) (N)

Class 23 'Baby Deltic' Headcode Box D5908 BR Green (FYE) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Full Yellow Ends) livery Running No. D5908 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5909 BR Blue (N)

Class 23 'Baby Deltic' Headcode Box D5909 BR Blue Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Blue livery Running No. D5909 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5902 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5902 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5902 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5906 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5906 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5906 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5907 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5907 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5907 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Disc Headcode D5909 BR Green (Late) (N)

Class 23 'Baby Deltic' Disc Headcode D5909 BR Green (Late) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green Late Crest livery Running No. D5909 Disc Headcodes Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

EFE Rail Class 23 'Baby Deltic' Headcode Box D5900 BR Green (SYP) (N)

Class 23 'Baby Deltic' H/code Box D5900 BR Green (SYP) Another type that has never been produced in N scale, the new EFE Rail models tell the story of this Class of ten locomotives that were ordered from English Electric as part of BR’s 1955 Modernisation Plan. Despite a service life spanning little more than ten years, the Baby Deltics have an interesting past; being rebuilt after just a few short years in service and emerging again with a distinct new look before their premature demise. The EFE Rail models have been designed to portray the real locomotives throughout their working lives so two bodyshells have been produced, one with headcode discs for the as-built examples and a second with central headcode panels. Boasting injection moulded bodyshells with fine relief detail and precision engraving, all of the locomotive’s defining features are recreated in miniature. Separate metal handrails are added aside each cab door and on the nose ends, whilst below the solebar separate tanks are fitted and the bogies are crafted with full brake and suspension detail. Powered by a coreless motor, DCC provision comes in the form of a Next18 decoder socket and space is provided for a speaker for those wishing to add sound. Directional lights are fitted and a switch is provided on the PCB to turn off the red tail lights, or this can be done via a function key when a DCC decoder is fitted. Details: Pristine BR Green (Small Yellow Panels) livery Running No. D5900 Centre Headcode Panels Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless, twin shaft motor providing drive to both bogies All axle drive Electrical pickup from all wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic disc profile Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, with tail lights switchable on/off via a circuit board switch on Analogue control. On DCC, directional lights or tail lights only can be switched on/off independently via dedicated functions Authentic light colours and temperatures selected for each model based on era and application High-fidelity, injection-moulded bodyshells covering locomotives fitted with either Disc Headcodes or Headcode Boxes Fully detailed Bogies incorporating suspension, brake components and cab steps, and with integral protection irons Separately applied underframe moulding featuring tanks and battery boxes adorned with individual metal pipework Separately fitted metal handrails aside each cab door and on the top of each nose Detailed cab interior Glazed bodyside and cab windows with separate, clear glazing Each model supplied with a full set of bufferbeam pipework and accessory parts, including a set of open and closed headcode discs where appropriate - N Scale

Dapol Class 56 '56007' Triple Grey Transrail (N)

Class 56 '56007' Triple Grey Transrail The British Rail Class 56 is a type of Co-Co locomotive designed for heavy freight work and was introduced between 1976 and 1983. In all 135 Class 56s were built, the first 30 by Electroputere in Romania but due to poor quality of construction the remainder were built by BREL at their Doncaster and Crewe works. The Class 56 was considered to be a successful locomotive and had a long service life. However performance and maintenance costs savings made from the deployment of the newly imported Class 66 resulted in most of the fleet of Class 56s being decommissioned or sold on by 2006. Several Class 56s are currently preserved and some class 56s are still in service today with private rail companies hauling freight and for the occasional special service.   Features: Retooled body with improvements to the body shape. cab roof and windows  Tooling options to accurately reproduce both Romanian and Doncaster bodyshell types Etched side and roof grilles in two styles  RP25.72 darkened wheels with pin point bearings  5 pole Super creep motor with controlled pulling power and incredible slow running speed  All wheel drive and pick up  Directional lights  Dapols low friction mechanism for efficient quiet running  Heavy split frame chassis for excellent running and haulage qualities    DCC Ready with a NEXT-18 decoder socket - N Scale

Dapol Class 56 '56131' BR Blue Large Logo (N)

Class 56 '56131' BR Blue Large Logo The British Rail Class 56 is a type of Co-Co locomotive designed for heavy freight work and was introduced between 1976 and 1983. In all 135 Class 56s were built, the first 30 by Electroputere in Romania but due to poor quality of construction the remainder were built by BREL at their Doncaster and Crewe works. The Class 56 was considered to be a successful locomotive and had a long service life. However performance and maintenance costs savings made from the deployment of the newly imported Class 66 resulted in most of the fleet of Class 56s being decommissioned or sold on by 2006. Several Class 56s are currently preserved and some class 56s are still in service today with private rail companies hauling freight and for the occasional special service.   Features: Retooled body with improvements to the body shape. cab roof and windows  Tooling options to accurately reproduce both Romanian and Doncaster bodyshell types Etched side and roof grilles in two styles  RP25.72 darkened wheels with pin point bearings  5 pole Super creep motor with controlled pulling power and incredible slow running speed  All wheel drive and pick up  Directional lights  Dapols low friction mechanism for efficient quiet running  Heavy split frame chassis for excellent running and haulage qualities    DCC Ready with a NEXT-18 decoder socket - N Scale

Dapol Class 56 '56302' Fastline Freight (N)

Class 56 '56302' Fastline Freight The British Rail Class 56 is a type of Co-Co locomotive designed for heavy freight work and was introduced between 1976 and 1983. In all 135 Class 56s were built, the first 30 by Electroputere in Romania but due to poor quality of construction the remainder were built by BREL at their Doncaster and Crewe works. The Class 56 was considered to be a successful locomotive and had a long service life. However performance and maintenance costs savings made from the deployment of the newly imported Class 66 resulted in most of the fleet of Class 56s being decommissioned or sold on by 2006. Several Class 56s are currently preserved and some class 56s are still in service today with private rail companies hauling freight and for the occasional special service.   Features: Retooled body with improvements to the body shape. cab roof and windows  Tooling options to accurately reproduce both Romanian and Doncaster bodyshell types Etched side and roof grilles in two styles  RP25.72 darkened wheels with pin point bearings  5 pole Super creep motor with controlled pulling power and incredible slow running speed  All wheel drive and pick up  Directional lights  Dapols low friction mechanism for efficient quiet running  Heavy split frame chassis for excellent running and haulage qualities    DCC Ready with a NEXT-18 decoder socket - N Scale

Rapido UK BR Class 46 D138 BR Green w/ FYE (N)

BR Class 46 D138 BR Green w/ FYE Features: D138 BR green full yellow end Single headcode panel Bodyside steps plated over Bodyside lower grille Outer bogie sandboxes only Directional lighting Next18 decoder socket High quality motor and drive mechanism for smooth running Factory-fitted speakers in all models DCC sound option (with ESU LokSound 5 decoder) NEM coupler pockets Separately fitted wipers Separately fitted radiator fan grill Optional buffer beam hoses to fit as required - N Scale

Rapido UK BR Class 45 45123 'The Lancashire Fusilier' BR Blue (N)

BR Class 45 45123 'The Lancashire Fusilier' BR Blue Features: 45123 “The Lancashire Fusilier” BR blue with headcode blinds Split headcode panel Bodyside steps removed Bodyside lower panel Outer bogie sandboxes only Directional lighting Next18 decoder socket High quality motor and drive mechanism for smooth running Factory-fitted speakers in all models DCC sound option (with ESU LokSound 5 decoder) NEM coupler pockets Separately fitted wipers Separately fitted radiator fan grill Optional buffer beam hoses to fit as required - N Scale

Graham Farish Class 47/0 D1601 BR Green (Small Yellow Panels)

Class 47/0 D1601 BR Green (Small Yellow Panels) The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. This model tells the story of the Class’s early days of service, sporting original features and carrying the iconic two-tone green livery in which the majority of the fleet was outshopped, complete with small yellow warning panels at either end. Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Detail Specific To This Model: Pristine BR Green (Small Yellow Panels) livery Running No. D1601 Glazed Headcode Panels Displaying Blinds 1V54 and 1A92 Twin Arm Windscreen Wipers High Intensity Headlight Round Buffers Bodyside Step below Cab Door Full Cab Roof Vents Original Three-Piece Radiator Grilles Ribbed Exhaust Panels Spanner Mk3 Roof Boiler Port 1,250 Gallon Water Tanks with Water Chutes Open Bogie-mounted Cab Steps - Era 5 - N Scale

Graham Farish Class 47/0 D1565 BR Green (Small Yellow Panels)

Class 47/0 D1565 BR Green (Small Yellow Panels) The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. This model tells the story of the Class’s early days of service, sporting original features and carrying the iconic two-tone green livery in which the majority of the fleet was outshopped, complete with small yellow warning panels at either end. Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Detail Specific To This Model: Pristine BR Green (Small Yellow Panels) livery Running No. D1565 Glazed Headcode Panels Displaying Blinds 1E11 and 4N09 Twin Arm Windscreen Wipers High Intensity Headlight Round Buffers Bodyside Step below Cab Door Full Cab Roof Vents Original Three-Piece Radiator Grilles Ribbed Exhaust Panels Spanner Mk3 Roof Boiler Port 1,250 Gallon Water Tanks with Water Chutes Open Bogie-mounted Cab Steps - Era 5 - N Scale

Graham Farish Class 47/4 47555 'The Commonwealth Spirit' RF Distribution (N)

Class 47/4 47555 'The Commonwealth Spirit' BR RF Distribution European The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s served on the front line of BR services for many decades and even in the 1990s, some 30+ years after their introduction, they were still being used for top link services, like hauling the Royal Train or in this case, as part of the fleet used for freight services via the then brand new Channel Tunnel linking the UK and the mainland Europe. The Railfreight Distribution European livery, as distinguished by the large lettering on the bodyside and blue roof, was introduced in the mid-1990s and was applied to distinguish those locomotives allocated to traffic flows serving Dollands Moor and the Channel Tunnel Freight Services, which used the Channel Tunnel from its opening in 1994. Class 47/4 No. 47555 ‘The Commonwealth Spirit’, which was something of a celebrity with spotters and enthusiasts, was one of the locomotives selected for this pool and was repainted resplendently into the new livery by Tinsley which added its Yorkshire Rose depot motif to the cab sides in the process. ‘The Commonwealth Spirit’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR Railfreight Distribution European livery Running No. 47555 Named ‘The Commonwealth Spirit’ Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Spanner Mk3 Boiler Port Water Tanks Removed NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish Class 47/7 47712 'Lady Diana Spencer' BR ScotRail (N)

Class 47/7 47712 'Lady Diana Spencer' BR ScotRail The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, and the Class 47/7 sub-class is just one example – these locomotives being fitted with extended range fuel tanks and cab-front jumper cables to work push-pull trains in Scotland. No. 47712 ‘Lady Diana Spencer’ was one of the first twelve locomotives converted to a 47/7, having entered works as Class 47/4 No. 47505, and is modelled in the striking BR ScotRail livery with bold grey, white and blue bodyside bands and large yellow ends and cab rooves. The real locomotive survives in preservation today, and has recently been returned to service on the main line, in much the same 1980s condition as depicted by our model. ‘Lady Diana Spencer’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR ScotRail livery Running No. 47712 Named ‘Lady Diana Spencer’ Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Scottish Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish LMS 10000 BR Green (Late Crest)

LMS 10000 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodyside Steps Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LMS 10001 BR Green (Late Crest)

LMS 10001 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Rapido UK Class 44 – D5 “Cross Fell” BR Green With Small Yellow Panel

Class 44 – D5 “Cross Fell” BR Green With Small Yellow Panel Details on this Model: D5 “Cross Fell” BR green with small yellow panel Livery & TOPS panel Bodyside steps Inner and outer bogie sandboxes Features: Directional Lighting Next18 Decoder Socket High quality motor and drive mechanism for smooth running DCC Sound option NEM Coupler pockets Separately fitted wipers A selection of discs so you may apply your chosen headcode Etched radiator fan grill BR ordered ten new Co-Cos from Derby Works as part of its appraisal of comparative locomotive designs (dubbed the ‘Pilot Scheme’). They were inspired by the LMS’ and Southern’s pioneer diesel designs and were outwardly similar to English Electric’s Type 4 (subsequently Class 40). Although fitted with a Sulzer 12LDA28 diesel engine capable of 2,300hp, the new BR Type 4s were heavy. Their 133 ton weight required a 1Co-Co1 wheel arrangement. The first, D1, emerged from Derby in 1959 and was named Scafell Pike. The remaining nine locomotives were also named after English and Welsh peaks and the class soon gained the nickname ‘Peak’, which was also applied to the subsequent Class 45s and Class 46s. Although a mixed traffic design, they were initially used on West Coast Main Line passenger services before being transferred en masse to the Midland Main Line. The subsequent arrival of the Sulver Type 4s (later Class 45) meant that the BR Type 4s (which would become Class 44 on TOPS) were allocated predominantly to freight work radiating out from Toton. Consequently, they could be seen as far afield as York or Severn Tunnel Junction. Any small class of locomotive was always under threat and the ‘44s’ were no exceptions. 44003 was withdrawn in July 1976 and all had gone by the end of 1980. Happily, two survive: D8 Penyghent is based at Peak Rail and D4 Great Gable is owned by the Peak Locomotive Company and is based at the Midland Railway-Butterley. - N Scale

Dapol Class 144 144011 West Yorkshire PTE Metro Red/Cream (N)

Class 144 011 West Yorkshire PTE Metro Red/Cream Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 144 144013 Regional Railways (N)

Class 144 013 Regional Railways Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143001 BR Provincial Light Blue (N)

Class 143 001 BR Provincial Light Blue Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143602 Arriva Blue Transport For Wales (N)

Class 143 602 Arriva Blue Transport For Wales Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143609 Arriva Trains Wales Turquoise (N)

Class 143 609 Arriva Trains Wales Turquoise Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143620 GWR Green (N)

Class 143 620 GWR Green Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143621 First Great Western Local Lines (N)

Class 143 621 First Great Western Local Lines Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 144 144004 Northern Rail Blue/Purple (N)

Class 144 004 Northern Rail Blue/Purple Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Graham Farish LMS 10001 BR Lined Green (Late Crest) 10001

LMS 10001 BR Lined Green (Late Crest) 10001 The Graham Farish model of No. 10001 is a highly detailed masterpiece in miniature, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of the prototype, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a coreless motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. The Next18 DCC decoder socket and a pre-fitted speaker make it easy to equip these models for DCC and even add sound, or why not opt for our SOUND FITTED model and enjoy realistic sound effects straight out of the box – whether you’re running on analogue or DCC! Coupled with No. 10000, the LMS Twins will make the perfect addition to any early-BR layout. Features: Pristine BR Lined Green (Late Crest) livery Running No. 10001 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - Era 5 - N Scale

Graham Farish Class 158 2-Car DMU 158729, ScotRail Saltire

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine ScotRail Saltire livery Running No. 158729 Two-Car Unit comprising car Nos. 52729 & 57729 Destination blinds for Dundee Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Radio Pod on Roof Revised Air Conditioning (Type B) Toilet Discharge via CET Tank Cummins Engine Revised Heather Scottish Air Dam Sanding Gear Fitted Revised LED Light Cluster Plated Gangway Doors - Era 9 - N Scale

Graham Farish Class 158 2-Car DMU 158824 Arriva Trains Wales (Revised)

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine Arriva Trains Wales (Revised) livery Running No. 158824 Two-Car Unit comprising car Nos. 52824 & 57824 Destination blinds for Aberystwyth Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Radio Pod on Roof Revised Air Conditioning (Type A) Toilet Discharge via CET Tank Cummins Engine Revised Heather Scottish Air Dam Sanding Gear Fitted Revised LED Light Cluster Plated Gangway Doors - Era 9 - N Scale

Graham Farish Class 158 2-Car DMU 158750 GWR Green (FirstGroup)

Class 158 2-Car DMU 158750 GWR Green (FirstGroup) Includes: - Pristine GWR (FirstGroup) livery - Running No. 158750 - Two-Car Unit comprising car Nos. 52750 & 57750 - Destination blinds for Penzance - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type A) - Toilet Discharge via CET Tank - Cummins Engine - Revised Heather - Scottish Air Dam - Sanding Gear Fitted - Revised LED Light Cluster - Plated Gangway Doors Lighting: - Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control - Cab and saloon interior lighting, switchable on/off via the under-chassis switches - Authentic light colours and temperatures selected for each model based on era and application DCC: - Next18 DCC decoder interface – one decoder required per unit - Easy-access DCC decoder socket located behind removable panel on underside of DMS (B) Sound: - Speaker installed in all models for optimum sound reproduction - Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - SOUND FITTED models operate on DCC and Analogue control as supplied Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours - Era 9 - N Scale

Graham Farish Class 158 2-Car DMU 158711 ScotRail Saltire

Class 158 2-Car DMU 158711 ScotRail Saltire Includes: - Pristine ScotRail Saltire livery - Running No. 158711 - Two-Car Unit comprising car Nos. 52711 & 57711 - Destination blinds for Edinburgh Waverley - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate)   Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type B) - Toilet Discharge via CET Tank - Cummins Engine - Revised Heather - Scottish Air Dam - Sanding Gear Fitted - Revised LED Light Cluster - Plated Gangway Doors   Lighting: Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application   DCC: Next18 DCC decoder interface – one decoder required per unit Easy-access DCC decoder socket located behind removable panel on underside of DMS (B)   Sound: - Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions SOUND FITTED models operate on DCC and Analogue control as supplied   Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours  

Graham Farish Class 158 2-Car DMU 158766 GWR Green (FirstGroup)

Class 158 2-Car DMU 158766 GWR Green (FirstGroup) Includes: - Pristine GWR (FirstGroup) livery - Running No. 158766 - Two-Car Unit comprising car Nos. 52766 & 57766 - Destination blinds for Bristol Temple Meads - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate)   Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type A) - Toilet Discharge via CET Tank - Cummins Engine - Revised Heather - Scottish Air Dam - Sanding Gear Fitted - Revised LED Light Cluster - Plated Gangway Doors   Lighting: Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application   DCC: Next18 DCC decoder interface – one decoder required per unit Easy-access DCC decoder socket located behind removable panel on underside of DMS (B)   Sound: - Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions SOUND FITTED models operate on DCC and Analogue control as supplied   Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours  

Graham Farish Class 90/0 90017 'Rail Express Systems Quality Assured' RES

Class 90/0 90017 'Rail Express Systems Quality Assured' Rail Express Systems The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example depicts No. 90017 ‘Rail Express Systems Quality Assured’ in Rail Express Systems livery. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. FEATURES: Pristine Rail Express Systems livery Named ‘Rail Express Systems Quality Assured’ Running No. 90017 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers (Pantograph end) / Round (Non-Pantograph end) Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 9 - N Scale

Graham Farish Class 90/0 90048 Freightliner G&W

Class 90/0 90048 Freightliner G&W The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example is decorated in the orange, yellow and black scheme of Freightliner Genesee & Wyoming, depicting No. 90048. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. FEATURES: Pristine Freightliner G&W livery Running No. 90048 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Rectangular Freight Buffers Screw link Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Era 9 - N Scale

Graham Farish Class 90/1 90139 BR Railfreight Distribution Sector

Class 90/1 90139 BR Railfreight Distribution Sector The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this model is finished as No. 90139 in BR Railfreight Distribution Sector livery. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. FEATURES: Pristine BR Railfreight Distribution Sector livery Running No. 90139 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Screw Link Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Era 8 - N Scale

Graham Farish Class 90/0 90002 'Mission: Impossible' Virgin Trains (Original)

Class 90/0 90002 'Mission: Impossible' Virgin Trains (Original) The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example depicts No. 90002 ‘Mission: Impossible’ in original Virgin Trains livery. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package.  FEATURES: Pristine Virgin Trains (Original) livery Named ‘Mission: Impossible’ Running No. 90002 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 9 - N Scale

Graham Farish Class 90/0 90042 Freightliner 'PowerHaul'

Class 90/0 90042 Freightliner 'PowerHaul' Includes: - Pristine Freightliner ‘Powerhaul’ livery - Running No. 90042 - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Rectangular Freight Buffers - Screw link Couplings - TDM Cables fitted to the Buffer Sides - Large Battery Charger - Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Coreless, twin shaft motor with two flywheels providing drive to both bogies - All axle drive - Electrical pickup from all wheels - Separate metal bearings fitted to each axle - Accessory Bag - N scale Locomotive information and history: Fifty Class 90 locomotives were ordered by British Rail in 1986 to replace the ageing Class 85 fleet on West Coast Main Line duties, whilst also allowing BR to cascade a number of Class 86s to East Anglia. Constructed at British Rail Engineering Limited, Crewe, the new locomotives were initially classified as 87/2s however this was soon changed to Class 90 as the design featured a completely new body-shell – although much of the technology within was shared with the Class 87s.   Construction of the 110mph rated locomotives was completed in 1990 and the fleet was split between different sectors of British Rail – 15 were allocated to InterCity services, five for Rail Express Systems (mail and parcels traffic) and the remaining 30 for Railfreight Distribution. Most of those allocated to Railfreight Distribution would later be downgraded to 75mph and reclassified as 90/1s numbered in the 901xx series following work to isolate the Electric Train Heating and push-pull equipment making them dedicated freight locos. Upon privatisation the Class 90 fleet was split between Virgin Trains, EWS and Freightliner. By 1999 all of the Class 90/1s acquired by EWS had been converted back to 90/0s due to an increased requirement for passenger locomotives to work contracted ScotRail sleeper trains and for hire to GNER for East Coast Main Line services. Further renumbering by EWS occurred when nine locos were fitted with different brake blocks and these became Class 90/2s numbered in the 902xx series. The Freightliner locos were also converted back to their original specification in the early 2000s. The Class 90s have carried numerous liveries including three decorated in European liveries for the Freightconnection event in 1992 which coincided with the opening of the Channel Tunnel to freight services. No. 90128 was decorated in SNCB turquoise (Belgium), No. 90129 in DB red (Germany) and No. 90130 in SNCF orange and grey (France) and each carried the name Freightconnection in their respective languages, alongside No. 90022 which was named ‘Freightconnection’ and carried Railfreight Distribution livery.   The majority of the Class have carried names whilst in service and the 90s have appeared a variety of other post-Privatisation liveries such as GNER, DB Schenker, First ScotRail, One (Anglia), Greater Anglia, National Express, DRS and Malcolm Logistics. Today, Class 90s remain in operation with Freightliner, DB Cargo UK (ex-EWS/DB Schenker) and most recently Locomotive Services which has acquired Nos. 90001 and 90002 and repainted them into InterCity Swallow livery for use on charters and excursions.

Graham Farish Class 90/0 90019 'Penny Black' Rail Express Systems

Class 90/0 90019 'Penny Black' Rail Express Systems Features: Era 9 Pristine Rail Express Systems livery Named ‘Penny Black’ Running No. 90019 DCC READY Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A DETAIL VARIATIONS SPECIFIC TO THIS MODEL Original ‘Clipped’ Buffers Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - N Scale  

Graham Farish Class 90/0 90037 BR Railfreight Distribution Sector

Class 90/0 90037 BR Railfreight Distribution Sector   Features: Era 8 Pristine BR Railfreight Distribution Sector livery Running No. 90037 DCC READY Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A DETAIL VARIATIONS SPECIFIC TO THIS MODEL Original ‘Clipped’ Buffers Rubbing Plates Screw Link Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed   - N Scale

Graham Farish Class 90/0 90004 'City of Glasgow' Virgin Trains (Original)

Class 90/0 90004 'City of Glasgow' Virgin Trains (Original) Features: Era 9 Pristine Virgin Trains (Original) livery Named ‘City of Glasgow’ Running No. 90004 DCC READY Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A DETAIL VARIATIONS SPECIFIC TO THIS MODEL Original ‘Clipped’ Buffers Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access   - N Scale