Graham Farish Class 47/8 47849 BR InterCity (Swallow) (N)

Class 47/8 47849 BR InterCity (Swallow)  The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, resulting in various sub-classes being used to group locomotives that had undergone the same work, or were built with similar features, such as the Class 47/4s which were those locomotives fitted with Electric Train Heating (ETH). Whilst not an official sub-class, some Class 47/4s were fitted with extended range fuel tanks allowing them to work longer distances and such machines were identified by being renumbered into the 478xx series. With their larger fuel tanks, these Class 47s were put to work on cross country routes and following Privatisation, the 47/8s were used by Virgin Cross Country. No. 47849 received its extended range fuel tanks in 1990 and was renumbered from 47570, remaining in InterCity livery long into Privatisation before it was repainted into Virgin colours in 2000 and so making this locomotive suitable for both Era 8 and Era 9 operations. Our new InterCity model takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR InterCity (Swallow) livery Running No. 47849 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cut-Cab Locomotive Cab-Front-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Kickplate below Car Door Partially Plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish Class 47/4 47555 'The Commonwealth Spirit' RF Distribution (N)

Class 47/4 47555 'The Commonwealth Spirit' BR RF Distribution European The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s served on the front line of BR services for many decades and even in the 1990s, some 30+ years after their introduction, they were still being used for top link services, like hauling the Royal Train or in this case, as part of the fleet used for freight services via the then brand new Channel Tunnel linking the UK and the mainland Europe. The Railfreight Distribution European livery, as distinguished by the large lettering on the bodyside and blue roof, was introduced in the mid-1990s and was applied to distinguish those locomotives allocated to traffic flows serving Dollands Moor and the Channel Tunnel Freight Services, which used the Channel Tunnel from its opening in 1994. Class 47/4 No. 47555 ‘The Commonwealth Spirit’, which was something of a celebrity with spotters and enthusiasts, was one of the locomotives selected for this pool and was repainted resplendently into the new livery by Tinsley which added its Yorkshire Rose depot motif to the cab sides in the process. ‘The Commonwealth Spirit’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR Railfreight Distribution European livery Running No. 47555 Named ‘The Commonwealth Spirit’ Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Spanner Mk3 Boiler Port Water Tanks Removed NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish Class 47/7 47712 'Lady Diana Spencer' BR ScotRail (N)

Class 47/7 47712 'Lady Diana Spencer' BR ScotRail The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, and the Class 47/7 sub-class is just one example – these locomotives being fitted with extended range fuel tanks and cab-front jumper cables to work push-pull trains in Scotland. No. 47712 ‘Lady Diana Spencer’ was one of the first twelve locomotives converted to a 47/7, having entered works as Class 47/4 No. 47505, and is modelled in the striking BR ScotRail livery with bold grey, white and blue bodyside bands and large yellow ends and cab rooves. The real locomotive survives in preservation today, and has recently been returned to service on the main line, in much the same 1980s condition as depicted by our model. ‘Lady Diana Spencer’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR ScotRail livery Running No. 47712 Named ‘Lady Diana Spencer’ Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Scottish Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish LMS 10000 BR Green (Late Crest)

LMS 10000 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodyside Steps Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LMS 10001 BR Green (Late Crest)

LMS 10001 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Dapol Class 144 144011 West Yorkshire PTE Metro Red/Cream (N)

Class 144 011 West Yorkshire PTE Metro Red/Cream Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 144 144013 Regional Railways (N)

Class 144 013 Regional Railways Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143001 BR Provincial Light Blue (N)

Class 143 001 BR Provincial Light Blue Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143602 Arriva Blue Transport For Wales (N)

Class 143 602 Arriva Blue Transport For Wales Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143609 Arriva Trains Wales Turquoise (N)

Class 143 609 Arriva Trains Wales Turquoise Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143620 GWR Green (N)

Class 143 620 GWR Green Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143621 First Great Western Local Lines (N)

Class 143 621 First Great Western Local Lines Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 144 144004 Northern Rail Blue/Purple (N)

Class 144 004 Northern Rail Blue/Purple Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale