Graham Farish HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371030 (N)

HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371030 The HYA Bogie Hopper Wagons were introduced from 2007 to transport coal to the UK’s coal-fired powers station. In later years, as the country transitioned away from burning coal the wagons were made redundant and found a new use moving biomass for which they were recoded IIA. The imposing wagons are reproduced faithfully in N scale using an injection moulded bodyshell, complete with interior partitions within the hopper, and hopper doors suspended from the underframe. Further details are added in the form of handwheels, lamp irons, buffers and separate pipe runs, and metal weights are fitted above each bogie for smooth and assured running. Those bogies are finely-moulded replicas of the prototype, fitted with metal wheelsets and with standard N scale couplings fitted into the NEM coupling pockets. The real wagons had a bare metal finish which is replicated on the Graham Farish model along with GBRf branding and the word ‘coal’ at one end. The outline of the former FirstGroup logos can also be seen, harking back to the time when the GBRf was owned by the group and operated as First GBRf. Details: Pristine GBRf ‘Coal’ Silver livery Running No. 371030 Features: Accessory Pack NEM Coupling Pockets Length 132mm (over couplings) - N Scale

Graham Farish HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371068 (N)

HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371068 The HYA Bogie Hopper Wagons were introduced from 2007 to transport coal to the UK’s coal-fired powers station. In later years, as the country transitioned away from burning coal the wagons were made redundant and found a new use moving biomass for which they were recoded IIA. The imposing wagons are reproduced faithfully in N scale using an injection moulded bodyshell, complete with interior partitions within the hopper, and hopper doors suspended from the underframe. Further details are added in the form of handwheels, lamp irons, buffers and separate pipe runs, and metal weights are fitted above each bogie for smooth and assured running. Those bogies are finely-moulded replicas of the prototype, fitted with metal wheelsets and with standard N scale couplings fitted into the NEM coupling pockets. The real wagons had a bare metal finish which is replicated on the Graham Farish model along with GBRf branding and the word ‘coal’ at one end. The outline of the former FirstGroup logos can also be seen, harking back to the time when the GBRf was owned by the group and operated as First GBRf. Details: Pristine GBRf ‘Coal’ Silver livery Running No. 371068 Features: Accessory Pack NEM Coupling Pockets Length 132mm (over couplings) - N Scale

Graham Farish IIA Bogie Hopper Wagon GBRf (VTG) Silver 37706955220-8 (N)

IIA Bogie Hopper Wagon GBRf (VTG) Silver 37706955220-8 The IIA Bogie Hopper Wagons started life as HYA Coal Hoppers, introduced from 2007 to deliver the fuel needed to run coal-fired power stations. However, as the UK transitioned away from using coal as the fuel for its power stations, the wagons became redundant and were re-employed on biomass trains, being recoded as IIAs in the process. The imposing wagons are reproduced faithfully in N scale using an injection moulded bodyshell, complete with interior partitions within the hopper, and hopper doors suspended from the underframe. Further details are added in the form of handwheels, lamp irons, buffers and separate pipe runs, and metal weights are fitted above each bogie for smooth and assured running. Those bogies are finely-moulded replicas of the prototype, fitted with metal wheelsets and with standard N scale couplings fitted into the NEM coupling pockets. Owned by VTG Rail but operated by GBRf, the real wagons had a bare metal finish which is replicated on the Graham Farish model along with GBRf and VTG branding. The outline of the former FirstGroup logos can also be seen, harking back to the time when the GBRf was owned by the group and operated as First GBRf. Details: Pristine GBRf (VTG) Silver livery Running No. 37706955220-8 Features: Accessory Pack NEM Coupling Pockets Length 132mm (over couplings) - N Scale  

Graham Farish BR Mk1 POS Royal Mail Travelling Post Office Red 80318 (N)

BR Mk1 POS Royal Mail Travelling Post Office Red 80318 This Graham Farish model of a POS coach carries all the hallmarks of this iconic design, the distinctive profile of the Mk1 coach is captured to a tee from the bodysides to the roof where finely moulded ventilators can be found. On the bodysides the handles and grab handles surrounding each door are moulded precisely, whilst the handrails aside each loading door are separate metal wire fittings. At either end, the corridor gangway is complete with lamp irons on either side and within, the corridor doors are modelled with the two small windows that is flush glazed – in the same way all of the windows on the model are. Metal grab handles are added to each end individually and metal toilet filler pipes extend to the roof. Footboards are included on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders and other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, operating in tandem with the bogie. The icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Details: Pristine Royal Mail Travelling Post Office Red livery Running No. 80318 B4 Bogies Scallop Roof Ventilators Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm (over couplings) - N Scale

Graham Farish BR Carflat Wagon BR Bauxite 'B748719' (N)

BR Carflat Wagon BR Bauxite 'B748719' Carflat Wagons allowed cars to be transported by rail, a practice that had started during the early twentieth century but which became more common after World War Two as more families began realising the dream of owning their own motor vehicle. Many were built from old coach underframes that had had their bodies scrapped, with the type really coming to the fore in 1966 when British Rail launched its Motorail service, providing British holidaymakers with long distance train services where they could take their car on holiday with them, giving the convenience of independent transport whilst on holiday but without the long drive to get there. This Graham Farish model depicts a BR-built Carflat, which to all intents and purposes is a standard BR Mk1 coach underframe running on a pair of BR B1 bogies. The deck of the vehicle is planked, and low side railings are fitted to prevent vehicles from accidentally driving off the side. Unlike a Mk1 coach, the underside of the vehicle is not overly populated but still features the typical truss frame along with vacuum brake cylinders and, unlike Mk1 coaches, has hand brake levers. The standard N scale couplings fit into NEM coupling pockets that are mounted on close coupling mechanisms, providing close coupling between vehicles but without restricting their use on curves, while metal wheelsets are fitted to the bogies to complete the model. Features: Pristine BR Bauxite livery Running No. B748719 Accessory Pack NEM Coupling Pockets Length 145mm (over couplings) - Era 5 - N Scale

Graham Farish BR Carflat Wagon BR Bauxite 'B748721' (N)

BR Carflat Wagon BR Bauxite 'B748721' Carflat Wagons allowed cars to be transported by rail, a practice that had started during the early twentieth century but which became more common after World War Two as more families began realising the dream of owning their own motor vehicle. Many were built from old coach underframes that had had their bodies scrapped, with the type really coming to the fore in 1966 when British Rail launched its Motorail service, providing British holidaymakers with long distance train services where they could take their car on holiday with them, giving the convenience of independent transport whilst on holiday but without the long drive to get there. This Graham Farish model depicts a BR-built Carflat, which to all intents and purposes is a standard BR Mk1 coach underframe running on a pair of BR B1 bogies. The deck of the vehicle is planked, and low side railings are fitted to prevent vehicles from accidentally driving off the side. Unlike a Mk1 coach, the underside of the vehicle is not overly populated but still features the typical truss frame along with vacuum brake cylinders and, unlike Mk1 coaches, has hand brake levers. The standard N scale couplings fit into NEM coupling pockets that are mounted on close coupling mechanisms, providing close coupling between vehicles but without restricting their use on curves, while metal wheelsets are fitted to the bogies to complete the model. Features: Pristine BR Bauxite livery Running No. B748721 Accessory Pack NEM Coupling Pockets Length 145mm (over couplings) - Era 5 - N Scale

Dapol Chiltern Railways 8x PC Slam Door Set with DVT (N)

Chiltern Railways 8 Piece Slam Door Set with DVT (N) Includes: - 5 x Mk3a TSO, 2 x Mk3a FO, 1 x Mk3 DVT - Finely detailed body with many extra fitted items - All wheel electrical pick up - Directional lights - NEXT-18 Decoder Socket - Accessory bag with optional fitted parts

Graham Farish JGA Bogie Hopper Buxton Lime Industries 'BLI19215' (N)

JGA Bogie Hopper Buxton Lime Industries 'BLI19215' The JGA Bogie Hoppers were built in Slovakia in the mid-1990s for Buxton Lime Industries and Tilcon, primarily working from Tunstead Quarry, operated by Buxton Lime Industries, near Buxton on the edge of the Peak District. Consisting of a large hopper with three pairs of bottom discharge doors, the wagons were used to transport lime products from the quarry for distribution around the UK. Reproduced in N Scale by Graham Farish, the JGA model features a precision moulded bodyshell which captures the wagon’s distinctive sloping ends with their ribbed constructed. Below the solebar, the three sets of discharge doors are added separately, meanwhile a metal weight is concealed above each bogie to ensure smooth running. The bogies themselves are fitted with metal wheels and axles whilst the integrated NEM coupling pockets allow alternative couplings to be fitted with ease. The eye catching white and blue livery faithfully adorns the model, complete with the various markings and operating instructions that are found on the real wagons. Features: Pristine Buxton Lime Industries White & Blue livery Running No. BLI19215 NEM Coupling Pockets Length 105mm (over couplings) - Era 9 - N Scale

Graham Farish BR 12T Plywood Fruit Van Late Bauxite Fyffes 'B875823' (N)

BR 12T Plywood Fruit Van Late Bauxite Fyffes 'B875823' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 12 Ton Fruit Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, each with a ventilator at the top. The metal body frame was panelled with plywood sheets, and four small ventilators were fitted along the bottom of each side to ventilate the cargo. As the name suggests, the vans were built to transport fruit but in later years they also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, plywood sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Late) livery Running No. B875823 NEM Coupling Pockets Length 49mm (over couplings) - Era 5 - N Scale

Graham Farish BR 12T Vent Van Early Bauxite ICI Fertilizer 'B761075' (N)

BR 12T Vent Van Early Bauxite ICI Fertilizer 'B761075' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wood. All manner of merchandise could be transported whilst remaining protected from the elements, and some vans could also be adorned with marketing posters for the products that may be contained within – in the case of this example ICI Fertilizer branding is applied. The Graham Farish model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and planked sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Early) livery Running No. B761075 NEM Coupling Pockets Length 49mm (over couplings) - Era 4 - N Scale

Graham Farish BR 10T Meat Van BR Crimson 'B870009' (N)

BR 10T Meat Van BR Crimson 'B870009' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 10 Ton Meat Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, in the centre of which was a row of four ventilator. The metal body frame was panelled with wooden planks, and further ventilators were fitted either side of the double doors. As the name suggests, the vans were built to transport meat but in later years also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, planked sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Crimson livery Running No. B870009 NEM Coupling Pockets Length 49mm (over couplings) - Era 4 - N Scale

Graham Farish BR 10T Meat Van Early Bauxite 'B870030' (N)

BR 10T Meat Van Early Bauxite 'B870030' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 10 Ton Meat Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, in the centre of which was a row of four ventilator. The metal body frame was panelled with wooden planks, and further ventilators were fitted either side of the double doors. As the name suggests, the vans were built to transport meat but in later years also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, planked sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Early) livery Running No. B870030 NEM Coupling Pockets Length 49mm (over couplings) - Era 4 - N Scale

Graham Farish BR 10T Meat Van Early Bauxite 'B870085' (N)

BR 10T Meat Van Early Bauxite 'B870085' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 10 Ton Meat Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, in the centre of which was a row of four ventilator. The metal body frame was panelled with wooden planks, and further ventilators were fitted either side of the double doors. As the name suggests, the vans were built to transport meat but in later years also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, planked sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Early) livery Running No. B870085 NEM Coupling Pockets Length 49mm (over couplings) - Era 4 - N Scale

Graham Farish BR 12T Plywood Fruit Van Late Bauxite 'B875840' (N)

BR 12T Plywood Fruit Van Late Bauxite 'B875840' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 12 Ton Fruit Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, each with a ventilator at the top. The metal body frame was panelled with plywood sheets, and four small ventilators were fitted along the bottom of each side to ventilate the cargo. As the name suggests, the vans were built to transport fruit but in later years they also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, plywood sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Late) livery Running No. B875840 NEM Coupling Pockets Length 49mm (over couplings) - Era 5 - N Scale

Graham Farish BR Mk1 NBA Brake Gangwayed High Security RES Royal Mail '94457'

BR Mk1 NBA Brake Gangwayed High Security Rail Exp. Sys. (Royal Mail) 94457  This Graham Farish model is the perfect addition to any Rail Express Systems fleet and employs a detailed bodyshell, with fine mouldings of the roller shutter doors, including the shutter vanes which are engraved individually, and the guard’s door with its adjacent handrails. At each end the corridor connector, handrails, ETH equipment and tail lights are each moulded crisply, whilst below the solebar the truss rod frames are modelled with great finesse, flanked by the battery boxes, dynamo and other auxiliary equipment. Blackened metal wheelsets are fitted to each bogie to ensure free-running, and not only does this model run well but it looks well too, with the vibrant RES livery reproduced using authentic colours, logos and fonts to add the finishing touches. MODEL FEATURES: Pristine Rail Express Systems (Royal Mail) livery Running No. 94457 BR1 Bogies Length 134mm (over couplings) - Era 8 - N Scale

Graham Farish BR Mk1 NBA Brake Gangwayed High Security RES '94465'

BR Mk1 NBA Brake Gangwayed High Security Rail Express Systems 94465 This Graham Farish model is the perfect addition to any Rail Express Systems fleet and employs a detailed bodyshell, with fine mouldings of the roller shutter doors, including the shutter vanes which are engraved individually, and the guard’s door with its adjacent handrails. At each end the corridor connector, handrails, ETH equipment and tail lights are each moulded crisply, whilst below the solebar the truss rod frames are modelled with great finesse, flanked by the battery boxes, dynamo and other auxiliary equipment. Blackened metal wheelsets are fitted to each bogie to ensure free-running, and not only does this model run well but it looks well too, with the vibrant RES livery reproduced using authentic colours, logos and fonts to add the finishing touches. MODEL FEATURES: Pristine Rail Express Systems livery Running No. 94465 BR1 Bogies Length 134mm (over couplings) - Era 8 - N Scale

Graham Farish LMS Stanier 50ft Full Brake BR Maroon 'M31248M'

LMS Stanier 50ft Full Brake BR Maroon 'M31248M' Features: Pristine BR Maroon livery Running No. M31248M Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 115mm (over couplings) The LMS built coaches to three distinct patterns, known commonly as Period 1, 2 and 3 coaches. The Period 3 coaches were the final development, and the first examples were built in 1933, a year after Sir William Stanier became Chief Mechanical Engineer of the LMS and so the Period 3 coaches are often referred to as ‘Stanier Coaches’. Whilst passenger vehicles were mostly 57ft in length, several specialist types including catering vehicles, Inspection Saloons and Full Brakes were built to a length of 50ft. The vehicles were constructed with wooden frames skinned in steel and with curved windows, providing a modern contrast to earlier types with their wooden bodies and squarer windows. The Full Brakes were used to carry luggage, parcels and other general merchandise and could be found marshalled as part of both passenger and parcel trains, and with their integral guard’s compartment the guard could often be found travelling here too. Many Full Brakes remained in traffic well into the British Railways era and after the demise of steam too, with some examples ending up in departmental or engineer’s use following their withdrawal from revenue earning service. The Graham Farish model captures the look of Stanier’s design to a tee, with a high fidelity bodyshell featuring expertly moulded handrails, door handles, hinges and even door stops, all replicated crisply on the bodysides. At either end, the LMS pattern gangways are added, whilst end steps are fitted alongside and a metal handrail is included adjacent to them and metal buffers are fitted below. Each window is flush glazed and inside, the guard’s compartment is modelled along with the hand brake wheel. Footboards are fitted along the solebar, below which vacuum brake equipment is present along with the battery boxes, dynamo and other auxiliary gear. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Like any Graham Farish model, this high level of detail is brought to life through the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. - Era 5 - N Scale

Graham Farish BR MK2A FK First Coridor BR Scotrail (13424)

BR MK2A FK First Coridor BR Scotrail (13424) Features: Pristine BR Scotrail livery Running No. 13424 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 145mm (over couplings) British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The first Mk2s were built in 1964 and by 1967, the Mk2A had arrived. The Mk2 family evolved over the years until the final iteration, the Mk2F, entered traffic in 1973, with the last examples built in 1975 paving the way for the Mk3s. When it comes to the Graham Farish model, like its real-life counterpart the Mk2A shares many of the highlights and features of the acclaimed Graham Farish Mk1 Coaches. The distinctive Mk2 shape gives the bodyshell and roof an unmistakable appearance and this is captured to a tee, complete with ventilators moulded expertly onto the profiled roof. Each end features separately fitted metal handrails, along with the corridor gangway and the two-part corridor doors within. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush glazing includes the sliding ventilators – a telltale sign that this is an early series Mk2. Take a look below the solebar and you will find a full complement of underframe equipment – depicting the components of the braking, electrical and auxiliary systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 8 - N Scale

Graham Farish BR MK2A TSO Tourist Second Open WCRC Maroon '5239'

BR MK2A TSO Tourist Second Open WCRC Maroon '5239' Features: Pristine West Coast Railway Company Maroon livery Running No. 5239 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 145mm (over couplings) British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The first Mk2s were built in 1964 and by 1967, the Mk2A had arrived. The Mk2 family evolved over the years until the final iteration, the Mk2F, entered traffic in 1973, with the last examples built in 1975 paving the way for the Mk3s. When it comes to the Graham Farish model, like its real-life counterpart the Mk2A shares many of the highlights and features of the acclaimed Graham Farish Mk1 Coaches. The distinctive Mk2 shape gives the bodyshell and roof an unmistakable appearance and this is captured to a tee, complete with ventilators moulded expertly onto the profiled roof. Each end features separately fitted metal handrails, along with the corridor gangway and the two-part corridor doors within. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush glazing includes the sliding ventilators – a telltale sign that this is an early series Mk2. Take a look below the solebar and you will find a full complement of underframe equipment – depicting the components of the braking, electrical and auxiliary systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 9 - N Scale

Peco 7 Plank Sowerby Bridge Industrial Society Set of 4

7 Plank Sowerby Bridge Industrial Society - Set of 4 - Running numbers 2, 5, 7 & 10 Limited Edition, Exclusive to Monk Bar Model Shop Includes: - Pack of 4x wagons  - Detailed plank sides - Iron metalwork picked out in black - Plain brown wood interior - Finely printed works plate - Undeframe and brake gear details - NEM coupling pockets - Metal spoked wheels - N scale

Graham Farish GWR Hawksworth Full Brake BR Departmental Blue & Grey DW150354

GWR Hawksworth Full Brake BR Departmental Blue & Grey DW150354 These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish GWR Hawksworth Full Brake BR Maroon W318W

GWR Hawksworth Full Brake BR Maroon W318W These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish GWR Hawksworth Brake Second Corridor BR Maroon W1772W

GWR Hawksworth Brake Second Corridor BR Maroon W1772W These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish GWR Hawksworth Composite Corridor BR Maroon W7818W

GWR Hawksworth Composite Corridor BR Maroon W7818W These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish GWR Hawksworth Composite Corridor BR Maroon W7821W

GWR Hawksworth Composite Corridor BR Maroon W7821W These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish GWR Hawksworth Composite Corridor GWR Chocolate & Cream 7254

GWR Hawksworth Composite Corridor GWR Chocolate & Cream 7254 These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish GWR Hawksworth Full Brake BR Crimson & Cream W305

GWR Hawksworth Full Brake BR Crimson & Cream W305 These N scale models of the GWR Hawksworth Coaches are one of the many jewels in the Graham Farish Rolling Stock fleet. Essential for any Western Region modeller, every coach is a faithful replica of the prototype and there are four vehicle types to choose from, allowing authentic trains to be created with ease. These include the Brake Third Corridor, Third Corridor and Composite Corridor, along with the Full Brake vehicle, whilst the Auto-Trailers designed by Hawksworth are also available in model form from Graham Farish. Each model sports finely moulded details such as handrails, grab handles and roof vents, and separate metal pipework is added to represent toilet fillers (where applicable) whilst the gangway connections and suspension arms are fitted separately at each end. Below the solebar the vacuum and steam heat pipework is present, along with battery boxes, dynamo and brake equipment – all fitted around the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of compartments and seating, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 138mm - N Scale

Graham Farish 14T Anchor-Mounted Tank Wagon 'Benzene' Silver 855 (N)

14T Anchor-Mounted Tank Wagon 'Benzene' Silver 855 Features: Pristine ‘Benzene’ Silver livery Running No. 855 Class A Tank Central Catwalk Cranked Air Vent 3-Hole Disc Wheels NEM Coupling Pockets Length 43mm - Era 4 - N Scale

Graham Farish 14T Anchor-Mounted Tank Wagon 'Gulf' Blue 79 (N)

14T Anchor-Mounted Tank Wagon 'Gulf' Blue 79 Features: Pristine ‘Gulf’ Blue livery Running No. 79 Class B Tank Offset Catwalk with Ladders Straight Air Vent Bottom Outlet Pipe and Handwheel Steam Heating Inlet Valve 3-Hole Disc Wheels NEM Coupling Pockets Length 43mm - Era 4 - N Scale

Graham Farish 14T Anchor-Mounted Tank Wagon 'Gulf' Blue 93 (N)

14T Anchor-Mounted Tank Wagon 'Gulf' Blue 93 Features: Pristine ‘Gulf’ Blue livery Running No. 93 Class B Tank Offset Catwalk with Ladders Straight Air Vent Bottom Outlet Pipe and Handwheel Steam Heating Inlet Valve 3-Hole Disc Wheels NEM Coupling Pockets - Era 4 - N Scale

Graham Farish 14T Anchor-Mounted Tank Wagon 'National Benzole' Silver 855 (N)

14T Anchor-Mounted Tank Wagon 'National Benzole' Silver 855 Features: Pristine ‘National Benzole’ Silver livery Running No. 855 Class A Tank Central Catwalk Cranked Air Vent 3-Hole Disc Wheels NEM Coupling Pockets Length 43mm - Era 4 - N Scale

Graham Farish 14T Anchor-Mounted Tank Wagon 'National Benzole' Silver 861 (N)

14T Anchor-Mounted Tank Wagon 'National Benzole' Silver 861 Features: Pristine ‘National Benzole’ Silver livery Running No. 861 Class A Tank Central Catwalk Cranked Air Vent 3-Hole Disc Wheels NEM Coupling Pockets Length 43mm - Era 4 - N Scale

Graham Farish BR Mk2F TSO Tourist Second Open Virgin Trains (Original) 6175

BR Mk2F TSO Tourist Second Open Virgin Trains (Original) 6175 Features: Pristine Virgin Trains (Original) livery Running No. 6175 Accessory Pack NEM Coupling Pockets Length 136mm - Era 9 - N Scale

Graham Farish BR Mk1 RMB Restaurant Miniature Buffet BR Maroon SC1829

BR Mk1 RMB Restaurant Miniature Buffet BR Maroon SC1829 Features: Pristine BR Maroon livery Running No. SC829 Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 5 - N Scale

Graham Farish BR Mk1 BG Brake Gangwayed BR Maroon E81497

BR Mk1 BG Brake Gangwayed BR Maroon E81497 Features: Pristine BR Maroon livery Running No. E81497 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 122mm - Era 5 - N Scale

Graham Farish BR Mk2F BSO Brake Second Open Virgin Trains (Original) no 9522

BR Mk2F BSO Brake Second Open Virgin Trains (Original) no 9522 Features: Pristine Virgin Trains (Original) livery Running No. 9522 Accessory Pack NEM Coupling Pockets Length 136mm - Era 9 - N Scale

Graham Farish BR Mk2F BSO Brake Second Open Virgin Trains (Original) no 9531

BR Mk2F BSO Brake Second Open Virgin Trains (Original) no 9531 Features: Pristine Virgin Trains (Original) livery Running No. 9531 Accessory Pack NEM Coupling Pockets Length 136mm - Era 9 - N Scale

Graham Farish BR Mk2F TSO Tourist Second Open Virgin Trains (Original) no 5977

BR Mk2F TSO Tourist Second Open Virgin Trains (Original) no 5977  Features: Pristine Virgin Trains (Original) livery Running No. 5977 Accessory Pack NEM Coupling Pockets Length 136mm - Era 9 - N Scale

Graham Farish BR Mk2F TSO Tourist Second Open Virgin Trains (Original) no 6009

BR Mk2F TSO Tourist Second Open Virgin Trains (Original) no 6009  Features: Pristine Virgin Trains (Original) livery Running No. 6009 Accessory Pack NEM Coupling Pockets Length 136mm - Era 9 - N Scale

Graham Farish BR Mk1 BSK Brake Second Corridor 'Laboratory 11' BR RTC (Revised

BR Mk1 BSK Brake Second Corridor 'Laboratory 11' BR RTC (Revised) Features: Pristine BR RTC (Revised) livery Running No. RDB975046 / Laboratory 11 B4 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 8 - N Scale

Graham Farish BR Mk2F TSO Tourist Second Open BR InterCity (Swallow) 6115

BR Mk2F TSO Tourist Second Open BR InterCity (Swallow) 6115 Includes: - Era 8 - Pristine BR InterCity (Swallow) livery - Running No. 6115 - Accessory Pack - NEM Coupling Pockets - Length 136mm - N Scale Vehicle information and history: British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The Mk2Fs were the final evolution of the Mk2 family, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Graham Farish model, it’s fair to say that this miniature Mk2F ticks all the boxes. The Distinctive Mk2 shape is captured to a tee whilst the few details that feature on the roof of the prototype, namely the ventilators at each end and the toilet roof panel, are expertly moulded. Each end features separately fitted metal handrails and the end footsteps at each corner are also included. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling attach via a NEM coupling pocket providing interchangeability with other coupling systems. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance.

Graham Farish BR Mk2F TSO Tourist Second Open ScotRail Saltire 5945

BR Mk2F TSO Tourist Second Open ScotRail Saltire 5945 Includes: - Era 9 - Pristine ScotRail Saltire livery - Running No. 5945 - Accessory Pack - NEM Coupling Pockets - Length 136mm - N Scale  Vehicles information and history: British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The Mk2Fs were the final evolution of the Mk2 family, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Graham Farish model, it’s fair to say that this miniature Mk2F ticks all the boxes. The Distinctive Mk2 shape is captured to a tee whilst the few details that feature on the roof of the prototype, namely the ventilators at each end and the toilet roof panel, are expertly moulded. Each end features separately fitted metal handrails and the end footsteps at each corner are also included. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling attach via a NEM coupling pocket providing interchangeability with other coupling systems. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance.

Graham Farish BR Mk2F BSO Brake Second Open BR InterCity (Swallow)

BR Mk2F BSO Brake Second Open BR InterCity (Swallow) Includes: - Era 8 - Pristine BR InterCity (Swallow) livery - Running No. 9526 - Accessory Pack - NEM Coupling Pockets - Length 136mm - N Scale Vehicle information and history: British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The Mk2Fs were the final evolution of the Mk2 family, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Graham Farish model, it’s fair to say that this miniature Mk2F ticks all the boxes. The Distinctive Mk2 shape is captured to a tee whilst the few details that feature on the roof of the prototype, namely the ventilators at each end and the toilet roof panel, are expertly moulded. Each end features separately fitted metal handrails and the end footsteps at each corner are also included. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems.   The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling attach via a NEM coupling pocket providing interchangeability with other coupling systems. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance.

Graham Farish BR Mk2F BSO Brake Second Open BR InterCity (Swallow) 9526

BR Mk2F BSO Brake Second Open BR InterCity (Swallow) 9526 Includes: - Era 8 - Pristine BR InterCity (Swallow) livery - Running No. 9526 - Accessory Pack - NEM Coupling Pockets - Length 136mm - N Scale Vehicle information and history: British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The Mk2Fs were the final evolution of the Mk2 family, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Graham Farish model, it’s fair to say that this miniature Mk2F ticks all the boxes. The Distinctive Mk2 shape is captured to a tee whilst the few details that feature on the roof of the prototype, namely the ventilators at each end and the toilet roof panel, are expertly moulded. Each end features separately fitted metal handrails and the end footsteps at each corner are also included. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling attach via a NEM coupling pocket providing interchangeability with other coupling systems. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance.

Graham Farish BR Mk2F BSO Brake Second Open ScotRail Saltire 9527

BR Mk2F BSO Brake Second Open ScotRail Saltire 9527 Includes: - Era 9 - Pristine ScotRail Saltire livery - Running No. 9527 - Accessory Pack - NEM Coupling Pockets - Length 136mm - N Scale Vehicle information and history: British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The Mk2Fs were the final evolution of the Mk2 family, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Graham Farish model, it’s fair to say that this miniature Mk2F ticks all the boxes. The Distinctive Mk2 shape is captured to a tee whilst the few details that feature on the roof of the prototype, namely the ventilators at each end and the toilet roof panel, are expertly moulded. Each end features separately fitted metal handrails and the end footsteps at each corner are also included. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling attach via a NEM coupling pocket providing interchangeability with other coupling systems. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance.

Graham Farish BR Mk2F BSO Brake Second Open ScotRail Saltire 9539

BR Mk2F BSO Brake Second Open ScotRail Saltire 9539 Includes: - Era 9 - Pristine ScotRail Saltire livery - Running No. 9539 - Accessory Pack - NEM Coupling Pockets - Length 136mm - N Scale  Vehicle information and history: British Rail’s second generation of standard coach was designated the Mk2, following on from the highly successful Mk1 series. Unlike the Mk1s however, the Mk2s evolved through different build batches, and such were the changes that a letter suffix was attributed to identify each of the different variants. Fewer coach types were built, with construction concentrating on vehicles offering standard accommodation of both first- and second-class, plus coaches that made provision for the Guard and train crew. Specialist vehicles such as catering and sleeping cars were not included, instead BR Mk1 and earlier types continued to fulfil these requirements until Mk3s with similar facilities arrived in the late-1970s to replace them. Like the Mk1s, the Mk2s were of steel construction, but featured more of a monocoque design than the Mk1, which added to their safety and integrity in the event of a collision. The Mk2Fs were the final evolution of the Mk2 family, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Graham Farish model, it’s fair to say that this miniature Mk2F ticks all the boxes. The Distinctive Mk2 shape is captured to a tee whilst the few details that feature on the roof of the prototype, namely the ventilators at each end and the toilet roof panel, are expertly moulded. Each end features separately fitted metal handrails and the end footsteps at each corner are also included. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets, whilst the standard N scale coupling attach via a NEM coupling pocket providing interchangeability with other coupling systems. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance.

Graham Farish LNER Thompson Brake Third Corridor BR Crimson & Cream No. E1931

LNER Thompson Brake Third Corridor BR Crimson & Cream No. E1931 The Graham Farish models of the LNER Thompson Coaches entered traffic to critical acclaim only a few years ago, and these models now return to the range in the stunning LNER Teak Effect livery. Essential for any Eastern Region modeller, every coach is a faithful replica of the prototype, with two vehicle lengths modelled to accurately depict the longer First Corridor, Third Corridor, Brake Third Corridor and Full Brake vehicles, or the shorter Composite Corridors. With the body sporting finely moulded details such as handrails, grab handles and roof vents, below the solebar the vacuum and steam heat pipework is present along with battery boxes, dynamo and brake equipment all fitted between the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. MODEL FEATURES: Pristine BR Crimson & Cream livery Running No. E1931E Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 133mm - Era 4 - N Scale

Graham Farish LNER Thompson Brake Third Corridor LNER Teak Effect No. E1915

LNER Thompson Brake Third Corridor LNER Teak Effect No. E1915 The Graham Farish models of the LNER Thompson Coaches entered traffic to critical acclaim only a few years ago, and these models now return to the range in the stunning LNER Teak Effect livery. Essential for any Eastern Region modeller, every coach is a faithful replica of the prototype, with two vehicle lengths modelled to accurately depict the longer First Corridor, Third Corridor, Brake Third Corridor and Full Brake vehicles, or the shorter Composite Corridors. With the body sporting finely moulded details such as handrails, grab handles and roof vents, below the solebar the vacuum and steam heat pipework is present along with battery boxes, dynamo and brake equipment all fitted between the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. MODEL FEATURES: Pristine LNER Teak Effect livery Running No. E1915 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 133mm - Era 3 - N Scale

Graham Farish LNER Thompson Composite Corridor BR Crimson & Cream No. E1239E

LNER Thompson Composite Corridor BR Crimson & Cream No. E1239E The Graham Farish models of the LNER Thompson Coaches entered traffic to critical acclaim only a few years ago, and these models now return to the range in the stunning LNER Teak Effect livery. Essential for any Eastern Region modeller, every coach is a faithful replica of the prototype, with two vehicle lengths modelled to accurately depict the longer First Corridor, Third Corridor, Brake Third Corridor and Full Brake vehicles, or the shorter Composite Corridors. With the body sporting finely moulded details such as handrails, grab handles and roof vents, below the solebar the vacuum and steam heat pipework is present along with battery boxes, dynamo and brake equipment all fitted between the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. MODEL FEATURES: Pristine BR Crimson & Cream livery Running No. E1239E Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 126mm - Era 4 - N Scale

Graham Farish LNER Thompson Composite Corridor LNER Teak Effect No. 145

LNER Thompson Composite Corridor LNER Teak Effect LNER No. 145 The Graham Farish models of the LNER Thompson Coaches entered traffic to critical acclaim only a few years ago, and these models now return to the range in the stunning LNER Teak Effect livery. Essential for any Eastern Region modeller, every coach is a faithful replica of the prototype, with two vehicle lengths modelled to accurately depict the longer First Corridor, Third Corridor, Brake Third Corridor and Full Brake vehicles, or the shorter Composite Corridors. With the body sporting finely moulded details such as handrails, grab handles and roof vents, below the solebar the vacuum and steam heat pipework is present along with battery boxes, dynamo and brake equipment all fitted between the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. MODEL FEATURES: Pristine LNER Teak Effect livery Running No. 145 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 126mm - Era 3 - N Scale

Graham Farish LNER Thompson Brake Third Corridor BR Crimson & Cream No. E1917E

LNER Thompson Brake Third Corridor BR Crimson & Cream No. E1917E The Graham Farish models of the LNER Thompson Coaches entered traffic to critical acclaim only a few years ago, and these models now return to the range in the stunning LNER Teak Effect livery. Essential for any Eastern Region modeller, every coach is a faithful replica of the prototype, with two vehicle lengths modelled to accurately depict the longer First Corridor, Third Corridor, Brake Third Corridor and Full Brake vehicles, or the shorter Composite Corridors. With the body sporting finely moulded details such as handrails, grab handles and roof vents, below the solebar the vacuum and steam heat pipework is present along with battery boxes, dynamo and brake equipment all fitted between the truss rod frames. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts making every model a masterpiece in miniature. MODEL FEATURES: Pristine BR Crimson & Cream livery Running No. E1917E Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 133mm - Era 4 - N Scale

Graham Farish BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream No. W150

BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream No. W15060 Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Chocolate & Cream livery Running No. W15060 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 5 - N Scale

Graham Farish BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream NoW15072

BR Mk1 CK Composite Corridor BR (WR) Chocolate & Cream No. W15072 Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Chocolate & Cream livery Running No. W15072 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 5 - N Scale

Graham Farish BR Mk1 BG Brake Gangwayed BR Maroon No. M81314

BR Mk1 BG Brake Gangwayed BR Maroon No. M81314 Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Maroon livery Running No. M81314 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 122mm - Era 5 - N Scale

Graham Farish BR Mk1 BG Brake Gangwayed BR Crimson & Cream

BR Mk1 BG Brake Gangwayed BR Crimson & Cream Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Crimson & Cream livery Running No. E80803 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 122mm - Era 4 - N Scale

Graham Farish BR Mk1 SK Second Corridor BR Sealink

BR Mk1 SK Second Corridor BR Sealink Crowned as Model of the Year when they were first introduced, the Graham Farish Mk1 Coaches continue to provide N scale modellers with a masterpiece in miniature, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Sealink livery Running No. SC24856 BR1 Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm - Era 7 - N Scale