Graham Farish HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371030 (N)

HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371030 The HYA Bogie Hopper Wagons were introduced from 2007 to transport coal to the UK’s coal-fired powers station. In later years, as the country transitioned away from burning coal the wagons were made redundant and found a new use moving biomass for which they were recoded IIA. The imposing wagons are reproduced faithfully in N scale using an injection moulded bodyshell, complete with interior partitions within the hopper, and hopper doors suspended from the underframe. Further details are added in the form of handwheels, lamp irons, buffers and separate pipe runs, and metal weights are fitted above each bogie for smooth and assured running. Those bogies are finely-moulded replicas of the prototype, fitted with metal wheelsets and with standard N scale couplings fitted into the NEM coupling pockets. The real wagons had a bare metal finish which is replicated on the Graham Farish model along with GBRf branding and the word ‘coal’ at one end. The outline of the former FirstGroup logos can also be seen, harking back to the time when the GBRf was owned by the group and operated as First GBRf. Details: Pristine GBRf ‘Coal’ Silver livery Running No. 371030 Features: Accessory Pack NEM Coupling Pockets Length 132mm (over couplings) - N Scale

Graham Farish HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371068 (N)

HYA Bogie Hopper Wagon GBRf Silver 'Coal' 371068 The HYA Bogie Hopper Wagons were introduced from 2007 to transport coal to the UK’s coal-fired powers station. In later years, as the country transitioned away from burning coal the wagons were made redundant and found a new use moving biomass for which they were recoded IIA. The imposing wagons are reproduced faithfully in N scale using an injection moulded bodyshell, complete with interior partitions within the hopper, and hopper doors suspended from the underframe. Further details are added in the form of handwheels, lamp irons, buffers and separate pipe runs, and metal weights are fitted above each bogie for smooth and assured running. Those bogies are finely-moulded replicas of the prototype, fitted with metal wheelsets and with standard N scale couplings fitted into the NEM coupling pockets. The real wagons had a bare metal finish which is replicated on the Graham Farish model along with GBRf branding and the word ‘coal’ at one end. The outline of the former FirstGroup logos can also be seen, harking back to the time when the GBRf was owned by the group and operated as First GBRf. Details: Pristine GBRf ‘Coal’ Silver livery Running No. 371068 Features: Accessory Pack NEM Coupling Pockets Length 132mm (over couplings) - N Scale

Graham Farish IIA Bogie Hopper Wagon GBRf (VTG) Silver 37706955220-8 (N)

IIA Bogie Hopper Wagon GBRf (VTG) Silver 37706955220-8 The IIA Bogie Hopper Wagons started life as HYA Coal Hoppers, introduced from 2007 to deliver the fuel needed to run coal-fired power stations. However, as the UK transitioned away from using coal as the fuel for its power stations, the wagons became redundant and were re-employed on biomass trains, being recoded as IIAs in the process. The imposing wagons are reproduced faithfully in N scale using an injection moulded bodyshell, complete with interior partitions within the hopper, and hopper doors suspended from the underframe. Further details are added in the form of handwheels, lamp irons, buffers and separate pipe runs, and metal weights are fitted above each bogie for smooth and assured running. Those bogies are finely-moulded replicas of the prototype, fitted with metal wheelsets and with standard N scale couplings fitted into the NEM coupling pockets. Owned by VTG Rail but operated by GBRf, the real wagons had a bare metal finish which is replicated on the Graham Farish model along with GBRf and VTG branding. The outline of the former FirstGroup logos can also be seen, harking back to the time when the GBRf was owned by the group and operated as First GBRf. Details: Pristine GBRf (VTG) Silver livery Running No. 37706955220-8 Features: Accessory Pack NEM Coupling Pockets Length 132mm (over couplings) - N Scale  

Graham Farish BR Mk1 POS Royal Mail Travelling Post Office Red 80318 (N)

BR Mk1 POS Royal Mail Travelling Post Office Red 80318 This Graham Farish model of a POS coach carries all the hallmarks of this iconic design, the distinctive profile of the Mk1 coach is captured to a tee from the bodysides to the roof where finely moulded ventilators can be found. On the bodysides the handles and grab handles surrounding each door are moulded precisely, whilst the handrails aside each loading door are separate metal wire fittings. At either end, the corridor gangway is complete with lamp irons on either side and within, the corridor doors are modelled with the two small windows that is flush glazed – in the same way all of the windows on the model are. Metal grab handles are added to each end individually and metal toilet filler pipes extend to the roof. Footboards are included on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders and other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, operating in tandem with the bogie. The icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Details: Pristine Royal Mail Travelling Post Office Red livery Running No. 80318 B4 Bogies Scallop Roof Ventilators Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm (over couplings) - N Scale

Graham Farish 8 Plank Wagon End Door 'Modern Transport Liverpool' Grey 1206(N)

8 Plank Wagon End Door 'Modern Transport Liverpool' Grey 1206 Britain’s Railways were developed primarily to move freight and by the early twentieth century, hundreds of independent companies were operating their own wagons to transport their goods around the UK by rail. Fleet sizes ranged from small concerns with a single wagon to large enterprises whose wagon count could run into the hundreds. The majority of wagons in private ownership were wooden bodied open wagons and by far the most common commodity that they carried was coal, although other materials, including coke, minerals and aggregates might also be transported depending on the nature of business conducted by the wagon’s owner. Various types of 8 Plank Wagon were built, and this Graham Farish model depicts one with fixed ends, unloading would therefore be via the side doors and bottom discharge doors, which on the model are neatly engraved into the wagon’s bodyshell which is moulded with crisp plank lines and ironwork detailing. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake leavers and metal door stops completing the look. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application prototype, completing this high-fidelity model. Details: Pristine ‘Modern Transport Liverpool’ Grey livery Running No. 1206 Features: Length 49mm (over couplings) - N Scale

Graham Farish 5 Plank China Clay Wagon GWR Grey '94054' (N)

5 Plank China Clay Wagon GWR Grey '94054' China Clay Wagons were synonymous with Cornwall where the largest deposit of Kaolin, known more commonly as china clay, had first been discovered in 1746 by William Cookworthy. The resulting industry made Cornwall the pre-eminent global source of china clay and as railways were established, they were used to transport the material both locally and further afield, to destinations where the material was required, like the Staffordshire potteries. The GWR, and subsequently BR, built open wagons like the one depicted by this Graham Farish model specifically for china clay traffic. With a 9ft wheelbase and 12T capacity, the wooden planked body sat on top of a metal underframe and our model reflects this, with fine detailing engraved and moulded onto the body. The chassis meanwhile incorporates brake gear and sports tie-bars between the axleboxes, along with metal door bangers and turned metal buffers. Spoked metal wheels and NEM coupling pockets complete the model, which is finished in a beautiful and authentic rendition of the GWR Grey livery. Features: Pristine GWR ‘GW’ Grey livery Running No. 94054 Accessory Pack NEM Coupling Pockets Length 46mm (over couplings) - Era 3 - N Scale

Graham Farish 5 Plank China Clay Triple Pack BR Bauxite (Early) w/ Canopy (N)

5 Plank China Clay Triple Pack BR Bauxite (Early) with Flat Canopy China Clay Wagons were synonymous with Cornwall where the largest deposit of Kaolin, known more commonly as china clay, had first been discovered in 1746 by William Cookworthy. The resulting industry made Cornwall the pre-eminent global source of china clay and as railways were established, they were used to transport the material both locally and further afield, to destinations where the material was required, like the Staffordshire potteries. The GWR, and subsequently BR, built open wagons like the one depicted by this Graham Farish model specifically for china clay traffic. With a 9ft wheelbase and 12T capacity, the wooden planked body sat on top of a metal underframe and our model reflects this, with fine detailing engraved and moulded onto the body. The chassis meanwhile incorporates brake gear and sports tie-bars between the axleboxes, along with metal door bangers and turned metal buffers. This triple-pack of wagons is finished in BR Bauxite livery, and each model comes complete with spoked metal wheels and NEM coupling pockets. The three models are also supplied with tarpaulin covers, as used on the real wagons to protect the valuable china clay cargo from the elements. Features: Pristine BR Bauxite (Early) livery Running Nos. B743073, B743077 & B743081 Accessory Pack NEM Coupling Pockets Length 3 x 46mm (over couplings) - Era 5 - N Scale

Graham Farish 3 Plank Wagon 'London Transport' Grey 'B.W.260' (N)

3 Plank Wagon 'London Transport' Grey 'B.W.260' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, 3 plank open wagons which had hinged sides allowing them to be lowered, aiding the loading and unloading of cargo. The goods carried by such wagons was varied and could range from loose loads like minerals and aggregate to crates, barrels and even single pieces of machinery or equipment. Basically, anything that could tolerate being exposed to the elements could be carried, although loads could also be sheeted if necessary to offer some protection from weather and general railway dirt. The 3 Plank Wagon depicted by this Graham Farish model is created using an injection moulded wagon body, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, and this level of detail extends to the wagon’s planked sides, both on the inner and outer faces. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, complete with separate brakes and brake levers. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine London Transport Grey livery Running No. B.W.260 NEM Coupling Pockets Length 50mm (over couplings) - Era 5 - N Scale

Graham Farish 3 Plank Wagon 'Mountsorrel Granite' Grey '127' (N)

3 Plank Wagon 'Mountsorrel Granite' Grey '127' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, 3 plank open wagons which had hinged sides allowing them to be lowered, aiding the loading and unloading of cargo. The goods carried by such wagons was varied and could range from loose loads like minerals and aggregate to crates, barrels and even single pieces of machinery or equipment. Basically, anything that could tolerate being exposed to the elements could be carried, although loads could also be sheeted if necessary to offer some protection from weather and general railway dirt. The 3 Plank Wagon depicted by this Graham Farish model is created using an injection moulded wagon body, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, and this level of detail extends to the wagon’s planked sides, both on the inner and outer faces. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, complete with separate brakes and brake levers. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Wagon is Preserved Pristine Mountsorrel Granite Grey livery Running No. 127 NEM Coupling Pockets Length 50mm (over couplings) - Era 3 - N Scale

Graham Farish JGA Bogie Hopper Buxton Lime Industries 'BLI19215' (N)

JGA Bogie Hopper Buxton Lime Industries 'BLI19215' The JGA Bogie Hoppers were built in Slovakia in the mid-1990s for Buxton Lime Industries and Tilcon, primarily working from Tunstead Quarry, operated by Buxton Lime Industries, near Buxton on the edge of the Peak District. Consisting of a large hopper with three pairs of bottom discharge doors, the wagons were used to transport lime products from the quarry for distribution around the UK. Reproduced in N Scale by Graham Farish, the JGA model features a precision moulded bodyshell which captures the wagon’s distinctive sloping ends with their ribbed constructed. Below the solebar, the three sets of discharge doors are added separately, meanwhile a metal weight is concealed above each bogie to ensure smooth running. The bogies themselves are fitted with metal wheels and axles whilst the integrated NEM coupling pockets allow alternative couplings to be fitted with ease. The eye catching white and blue livery faithfully adorns the model, complete with the various markings and operating instructions that are found on the real wagons. Features: Pristine Buxton Lime Industries White & Blue livery Running No. BLI19215 NEM Coupling Pockets Length 105mm (over couplings) - Era 9 - N Scale

Peco 7 Plank Sowerby Bridge Industrial Society #10

7 Plank Sowerby Bridge Industrial Society #10 Limited Edition, Exclusive to Monk Bar Model Shop Includes: - Detailed plank sides - Iron metalwork picked out in black - Plain brown wood interior - Finely printed works plate - Undeframe and brake gear details - NEM coupling pockets - Metal spoked wheels - N scale

Peco 7 Plank Sowerby Bridge Industrial Society #2

7 Plank Sowerby Bridge Industrial Society #2  Limited Edition, Exclusive to Monk Bar Model Shop Includes: - Detailed plank sides - Iron metalwork picked out in black - Plain brown wood interior - Finely printed works plate - Undeframe and brake gear details - NEM coupling pockets - Metal spoked wheels - N scale

Peco 7 Plank Sowerby Bridge Industrial Society #7

7 Plank Sowerby Bridge Industrial Society #7 Limited Edition, Exclusive to Monk Bar Model Shop Includes: - Detailed plank sides - Iron metalwork picked out in black - Plain brown wood interior - Finely printed works plate - Undeframe and brake gear details - NEM coupling pockets - Metal spoked wheels - N scale

Peco 7 Plank Sowerby Bridge Industrial Society Set of 4

7 Plank Sowerby Bridge Industrial Society - Set of 4 - Running numbers 2, 5, 7 & 10 Limited Edition, Exclusive to Monk Bar Model Shop Includes: - Pack of 4x wagons  - Detailed plank sides - Iron metalwork picked out in black - Plain brown wood interior - Finely printed works plate - Undeframe and brake gear details - NEM coupling pockets - Metal spoked wheels - N scale

Graham Farish BR HEA Hopper Wagon BR Bauxite '361728'

BR HEA Hopper Wagon BR Bauxite '361728' The HEA Hopper Wagons were introduced following the success of the HAA Coal Hoppers which were first used in the mid-1960s to deliver coal to power stations as part of the then-new Merry-Go-Round (MGR) trains. The first wagons were built in the mid-1970s as HBAs, but as construction progressed, the design was changed, and the code HEA was used for later batches. The HBAs were subsequently modified to match the HEAs and recoded, giving a total fleet of almost 2,000 HEAs. The wagons replaced ageing wooden- and steel-bodied wagons, delivering household coal to local terminals and reaching all corners of the UK. The HEAs worked in both mixed freight and block train formations. With the demand for household coal in decline, HEAs were used to transport other minerals, like rock salt, and many were rebuilt or recoded, for example some were used as Nuclear Barrier Wagons (RNAs) with their hoppers removed, or box wagons (MEAs) with new box bodies to carry a variety of bulk loads. Features: Pristine BR Bauxite livery Running No. 361728 Length 62mm - Era 7 - N Scale  

Graham Farish BR HEA Hopper Wagon BR Bauxite '360292'

BR HEA Hopper Wagon BR Bauxite '360292' The HEA Hopper Wagons were introduced following the success of the HAA Coal Hoppers which were first used in the mid-1960s to deliver coal to power stations as part of the then-new Merry-Go-Round (MGR) trains. The first wagons were built in the mid-1970s as HBAs, but as construction progressed, the design was changed, and the code HEA was used for later batches. The HBAs were subsequently modified to match the HEAs and recoded, giving a total fleet of almost 2,000 HEAs. The wagons replaced ageing wooden- and steel-bodied wagons, delivering household coal to local terminals and reaching all corners of the UK. The HEAs worked in both mixed freight and block train formations. With the demand for household coal in decline, HEAs were used to transport other minerals, like rock salt, and many were rebuilt or recoded, for example some were used as Nuclear Barrier Wagons (RNAs) with their hoppers removed, or box wagons (MEAs) with new box bodies to carry a variety of bulk loads. Features: Pristine BR Bauxite livery Running No. 360292 Length 62mm - Era 7 - N Scale

EFE Rail PBA Tiger TRL 11627 ECC International White

PBA Tiger TRL 11627 ECC International White Following the launch of the PBA ‘Clay Tiger’ Wagons in N scale for the first time, further examples join the EFE Rail range, and this model is finished in pristine English China Clays International White livery. Accurately detailed to reflect the prototype, this example depicts a wagon as built, with original solebars and without train-ferry tie-down points. Features: Pristine ECC International White Livery Running No. TRL11627 Length 125mm - Era 8 - N Scale  

EFE Rail PBA Tiger TRL 11601 ECC International White

PBA Tiger TRL 11601 ECC International White New Tooling has been produced to model the PBA ‘Clay Tiger’ Wagons in N scale for the first time, and this EFE Rail model is finished in pristine English China Clays International White livery, in original condition with un-strengthened solebars and without train-ferry tie-down points. FEATURES: Pristine ECC International White Livery Running No. TRL11601 Length 125mm - Era 8 - N Scale