Peco Planksided Vanfit Bile Beans Leeds No.2 (N) (MBMS Excl)

Planksided Vanfit - Bile Beans (Leeds) No.2 (N) - MBMS Exclusive

Peco Planksided Vanfit Bile Beans Twin Pack (N) (MBMS Excl)

Planksided Vanfit - Bile Beans Twin Pack No.1 & No.2 (N) (MBMS Excl) - MBMS Exclusive

Graham Farish BR Mk1 POS Royal Mail Travelling Post Office Red 80318 (N)

BR Mk1 POS Royal Mail Travelling Post Office Red 80318 This Graham Farish model of a POS coach carries all the hallmarks of this iconic design, the distinctive profile of the Mk1 coach is captured to a tee from the bodysides to the roof where finely moulded ventilators can be found. On the bodysides the handles and grab handles surrounding each door are moulded precisely, whilst the handrails aside each loading door are separate metal wire fittings. At either end, the corridor gangway is complete with lamp irons on either side and within, the corridor doors are modelled with the two small windows that is flush glazed – in the same way all of the windows on the model are. Metal grab handles are added to each end individually and metal toilet filler pipes extend to the roof. Footboards are included on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders and other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard N scale coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, operating in tandem with the bogie. The icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Details: Pristine Royal Mail Travelling Post Office Red livery Running No. 80318 B4 Bogies Scallop Roof Ventilators Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 136mm (over couplings) - N Scale

Graham Farish 8 Plank Wagon End Door 'Modern Transport Liverpool' Grey 1206(N)

8 Plank Wagon End Door 'Modern Transport Liverpool' Grey 1206 Britain’s Railways were developed primarily to move freight and by the early twentieth century, hundreds of independent companies were operating their own wagons to transport their goods around the UK by rail. Fleet sizes ranged from small concerns with a single wagon to large enterprises whose wagon count could run into the hundreds. The majority of wagons in private ownership were wooden bodied open wagons and by far the most common commodity that they carried was coal, although other materials, including coke, minerals and aggregates might also be transported depending on the nature of business conducted by the wagon’s owner. Various types of 8 Plank Wagon were built, and this Graham Farish model depicts one with fixed ends, unloading would therefore be via the side doors and bottom discharge doors, which on the model are neatly engraved into the wagon’s bodyshell which is moulded with crisp plank lines and ironwork detailing. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake leavers and metal door stops completing the look. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application prototype, completing this high-fidelity model. Details: Pristine ‘Modern Transport Liverpool’ Grey livery Running No. 1206 Features: Length 49mm (over couplings) - N Scale

Graham Farish 24T Ore Hopper 'Stanton' Red '4255' (N)

24T Ore Hopper 'Stanton' Red '4255' The 24T Iron Ore hopper was ordered by BR in 1950 and rather unusually, all 1500 to diagram 1/162 were constructed by outside contractors. The Graham Farish model faithfully replicates this historic wagon and is offered here in a vibrant red livery of Stanton. Details: Pristine ‘Stanton’ Livery Running No. 4255 Features: Accessory Pack NEM Coupling Pockets Length 41mm - N Scale

Graham Farish 24T Ore Hopper 'Stanton' Red '4279' (N)

24T Ore Hopper 'Stanton' Red '4279' The 24T Iron Ore hopper was ordered by BR in 1950 and rather unusually, all 1500 to diagram 1/162 were constructed by outside contractors. The Graham Farish model faithfully replicates this historic wagon and is offered here in a vibrant red livery of Stanton. Details: Pristine ‘Stanton’ Livery Running No. 4279 Features: Accessory Pack NEM Coupling Pockets Length 41mm - N Scale

Graham Farish BR Carflat Wagon BR Bauxite 'B748719' (N)

BR Carflat Wagon BR Bauxite 'B748719' Carflat Wagons allowed cars to be transported by rail, a practice that had started during the early twentieth century but which became more common after World War Two as more families began realising the dream of owning their own motor vehicle. Many were built from old coach underframes that had had their bodies scrapped, with the type really coming to the fore in 1966 when British Rail launched its Motorail service, providing British holidaymakers with long distance train services where they could take their car on holiday with them, giving the convenience of independent transport whilst on holiday but without the long drive to get there. This Graham Farish model depicts a BR-built Carflat, which to all intents and purposes is a standard BR Mk1 coach underframe running on a pair of BR B1 bogies. The deck of the vehicle is planked, and low side railings are fitted to prevent vehicles from accidentally driving off the side. Unlike a Mk1 coach, the underside of the vehicle is not overly populated but still features the typical truss frame along with vacuum brake cylinders and, unlike Mk1 coaches, has hand brake levers. The standard N scale couplings fit into NEM coupling pockets that are mounted on close coupling mechanisms, providing close coupling between vehicles but without restricting their use on curves, while metal wheelsets are fitted to the bogies to complete the model. Features: Pristine BR Bauxite livery Running No. B748719 Accessory Pack NEM Coupling Pockets Length 145mm (over couplings) - Era 5 - N Scale

Graham Farish BR Carflat Wagon BR Bauxite 'B748721' (N)

BR Carflat Wagon BR Bauxite 'B748721' Carflat Wagons allowed cars to be transported by rail, a practice that had started during the early twentieth century but which became more common after World War Two as more families began realising the dream of owning their own motor vehicle. Many were built from old coach underframes that had had their bodies scrapped, with the type really coming to the fore in 1966 when British Rail launched its Motorail service, providing British holidaymakers with long distance train services where they could take their car on holiday with them, giving the convenience of independent transport whilst on holiday but without the long drive to get there. This Graham Farish model depicts a BR-built Carflat, which to all intents and purposes is a standard BR Mk1 coach underframe running on a pair of BR B1 bogies. The deck of the vehicle is planked, and low side railings are fitted to prevent vehicles from accidentally driving off the side. Unlike a Mk1 coach, the underside of the vehicle is not overly populated but still features the typical truss frame along with vacuum brake cylinders and, unlike Mk1 coaches, has hand brake levers. The standard N scale couplings fit into NEM coupling pockets that are mounted on close coupling mechanisms, providing close coupling between vehicles but without restricting their use on curves, while metal wheelsets are fitted to the bogies to complete the model. Features: Pristine BR Bauxite livery Running No. B748721 Accessory Pack NEM Coupling Pockets Length 145mm (over couplings) - Era 5 - N Scale

Graham Farish 3 Plank Wagon 'London Transport' Grey 'B.W.260' (N)

3 Plank Wagon 'London Transport' Grey 'B.W.260' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, 3 plank open wagons which had hinged sides allowing them to be lowered, aiding the loading and unloading of cargo. The goods carried by such wagons was varied and could range from loose loads like minerals and aggregate to crates, barrels and even single pieces of machinery or equipment. Basically, anything that could tolerate being exposed to the elements could be carried, although loads could also be sheeted if necessary to offer some protection from weather and general railway dirt. The 3 Plank Wagon depicted by this Graham Farish model is created using an injection moulded wagon body, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, and this level of detail extends to the wagon’s planked sides, both on the inner and outer faces. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, complete with separate brakes and brake levers. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine London Transport Grey livery Running No. B.W.260 NEM Coupling Pockets Length 50mm (over couplings) - Era 5 - N Scale

Graham Farish 3 Plank Wagon 'Mountsorrel Granite' Grey '127' (N)

3 Plank Wagon 'Mountsorrel Granite' Grey '127' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, 3 plank open wagons which had hinged sides allowing them to be lowered, aiding the loading and unloading of cargo. The goods carried by such wagons was varied and could range from loose loads like minerals and aggregate to crates, barrels and even single pieces of machinery or equipment. Basically, anything that could tolerate being exposed to the elements could be carried, although loads could also be sheeted if necessary to offer some protection from weather and general railway dirt. The 3 Plank Wagon depicted by this Graham Farish model is created using an injection moulded wagon body, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, and this level of detail extends to the wagon’s planked sides, both on the inner and outer faces. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, complete with separate brakes and brake levers. The model runs on spoked wheels which are of metal construction whilst metal buffers adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Wagon is Preserved Pristine Mountsorrel Granite Grey livery Running No. 127 NEM Coupling Pockets Length 50mm (over couplings) - Era 3 - N Scale

Graham Farish BR 12T Plywood Fruit Van Late Bauxite Fyffes 'B875823' (N)

BR 12T Plywood Fruit Van Late Bauxite Fyffes 'B875823' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 12 Ton Fruit Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, each with a ventilator at the top. The metal body frame was panelled with plywood sheets, and four small ventilators were fitted along the bottom of each side to ventilate the cargo. As the name suggests, the vans were built to transport fruit but in later years they also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, plywood sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Late) livery Running No. B875823 NEM Coupling Pockets Length 49mm (over couplings) - Era 5 - N Scale

Graham Farish BR 12T Vent Van Early Bauxite ICI Fertilizer 'B761075' (N)

BR 12T Vent Van Early Bauxite ICI Fertilizer 'B761075' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wood. All manner of merchandise could be transported whilst remaining protected from the elements, and some vans could also be adorned with marketing posters for the products that may be contained within – in the case of this example ICI Fertilizer branding is applied. The Graham Farish model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and planked sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Early) livery Running No. B761075 NEM Coupling Pockets Length 49mm (over couplings) - Era 4 - N Scale

Graham Farish BR 10T Meat Van BR Crimson 'B870009' (N)

BR 10T Meat Van BR Crimson 'B870009' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 10 Ton Meat Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, in the centre of which was a row of four ventilator. The metal body frame was panelled with wooden planks, and further ventilators were fitted either side of the double doors. As the name suggests, the vans were built to transport meat but in later years also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, planked sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Crimson livery Running No. B870009 NEM Coupling Pockets Length 49mm (over couplings) - Era 4 - N Scale

Graham Farish BR 10T Meat Van Early Bauxite 'B870030' (N)

BR 10T Meat Van Early Bauxite 'B870030' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 10 Ton Meat Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, in the centre of which was a row of four ventilator. The metal body frame was panelled with wooden planks, and further ventilators were fitted either side of the double doors. As the name suggests, the vans were built to transport meat but in later years also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, planked sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Early) livery Running No. B870030 NEM Coupling Pockets Length 49mm (over couplings) - Era 4 - N Scale

Graham Farish BR 10T Meat Van Early Bauxite 'B870085' (N)

BR 10T Meat Van Early Bauxite 'B870085' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 10 Ton Meat Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, in the centre of which was a row of four ventilator. The metal body frame was panelled with wooden planks, and further ventilators were fitted either side of the double doors. As the name suggests, the vans were built to transport meat but in later years also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, planked sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Early) livery Running No. B870085 NEM Coupling Pockets Length 49mm (over couplings) - Era 4 - N Scale

Graham Farish BR 12T Plywood Fruit Van Late Bauxite 'B875840' (N)

BR 12T Plywood Fruit Van Late Bauxite 'B875840' British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs, for covered vans most of the new designs centred around a 10ft wheelbase chassis with a metal and wood body on top. Alongside general merchandise vans, several specialist types were built including the 12 Ton Fruit Van which employed a metal chassis whilst the van was constructed from a pair of corrugated metal ends, each with a ventilator at the top. The metal body frame was panelled with plywood sheets, and four small ventilators were fitted along the bottom of each side to ventilate the cargo. As the name suggests, the vans were built to transport fruit but in later years they also found use moving general merchandise. The Graham Farish model is a faithful replica of the BR design, using a precision moulded body that accurately captures the corrugated ends, plywood sides and ventilators, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile for the first time the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. Features: Pristine BR Bauxite (Late) livery Running No. B875840 NEM Coupling Pockets Length 49mm (over couplings) - Era 5 - N Scale

Rapido UK Iron Mink Triple Pack – BR (Western Region)

Iron Mink – BR (W) Triple Pack - N Scale Features: - ERA: British Railways - Early (1948 - 1956) - Wagon 1 – No.W69121 (end vents, double sided 3-shoe brakes and standard doors) - Wagon 2 – No.W11290 (end vents, double sided 3-shoe brakes and standard doors) - Wagon 3 – No.W69483 (end vents, double sided 3-shoe brakes and standard doors) - Highly detailed - High quality finish - Lots of separately fitted parts - NEM Couplings - N Scale

Rapido UK Iron Mink Triple Pack – GW at War Pack A

Iron Mink – GW at War Pack A Triple Pack - N Scale Features: - ERA: Grouping Post 36 (1937 - 1947) - Improvised gunpowder van livery - Wagon 1 – No.11346 (plated end vents, double sided 3-shoe brakes and GPV doors) - Wagon 2 – No.58725 (plated end vents, double sided 4-shoe brakes and GPV doors) - Wagon 3 – No.11036 (end vents, double sided 3-shoe brakes and standard doors) - Highly detailed - High quality finish - Lots of separately fitted parts - NEM Couplings - N Scale

Peco 7 Plank Sowerby Bridge Industrial Society #10

7 Plank Sowerby Bridge Industrial Society #10 Limited Edition, Exclusive to Monk Bar Model Shop Includes: - Detailed plank sides - Iron metalwork picked out in black - Plain brown wood interior - Finely printed works plate - Undeframe and brake gear details - NEM coupling pockets - Metal spoked wheels - N scale

Peco 7 Plank Sowerby Bridge Industrial Society #2

7 Plank Sowerby Bridge Industrial Society #2  Limited Edition, Exclusive to Monk Bar Model Shop Includes: - Detailed plank sides - Iron metalwork picked out in black - Plain brown wood interior - Finely printed works plate - Undeframe and brake gear details - NEM coupling pockets - Metal spoked wheels - N scale

Peco 7 Plank Sowerby Bridge Industrial Society #7

7 Plank Sowerby Bridge Industrial Society #7 Limited Edition, Exclusive to Monk Bar Model Shop Includes: - Detailed plank sides - Iron metalwork picked out in black - Plain brown wood interior - Finely printed works plate - Undeframe and brake gear details - NEM coupling pockets - Metal spoked wheels - N scale

Peco 7 Plank Sowerby Bridge Industrial Society Set of 4

7 Plank Sowerby Bridge Industrial Society - Set of 4 - Running numbers 2, 5, 7 & 10 Limited Edition, Exclusive to Monk Bar Model Shop Includes: - Pack of 4x wagons  - Detailed plank sides - Iron metalwork picked out in black - Plain brown wood interior - Finely printed works plate - Undeframe and brake gear details - NEM coupling pockets - Metal spoked wheels - N scale

Graham Farish BR 20T Brake Van BR Railfreight Distribution Sector B954989 (N)

BR 20T Brake Van BR Railfreight Distribution Sector B954989 (N) The BR Standard 20 Ton Brake Van is a classic vehicle and a must for any freight collection or goods yard scene. A mandatory requirement as part of all goods trains until 1968, and in use well into the 1980s with unfitted trains and other selected services, the brake van provided braking facilities and offered the Guard a refuge from the elements in which to stay warm and dry, whilst observing operations via the end windows or side duckets. Features: Pristine BR Railfreight Distribution Sector livery Running No. B954989 Flush Ends Long Footboards 3-Hole Disc Wheels Accessory Pack Length 56mm - Era 8 - N Scale

Graham Farish BR 20T Brake Van BR Railfreight Red & Grey B955096 (N)

BR 20T Brake Van BR Railfreight Red & Grey B955096 (N) The BR Standard 20 Ton Brake Van is a classic vehicle and a must for any freight collection or goods yard scene. A mandatory requirement as part of all goods trains until 1968, and in use well into the 1980s with unfitted trains and other selected services, the brake van provided braking facilities and offered the Guard a refuge from the elements in which to stay warm and dry, whilst observing operations via the end windows or side duckets. Features: Pristine BR Railfreight Red & Grey livery Running No. B955096 Flush Ends Long Footboards 3-Hole Disc Wheels Accessory Pack Length 56mm - Era 7 - N Scale

Graham Farish BR 20T Brake Van BR Railfreight Red & Grey B955247 (N)

BR 20T Brake Van BR Railfreight Red & Grey B955247 (N) The BR Standard 20 Ton Brake Van is a classic vehicle and a must for any freight collection or goods yard scene. A mandatory requirement as part of all goods trains until 1968, and in use well into the 1980s with unfitted trains and other selected services, the brake van provided braking facilities and offered the Guard a refuge from the elements in which to stay warm and dry, whilst observing operations via the end windows or side duckets. Features: Pristine BR Railfreight Red & Grey livery Running No. B955247 Flush Ends Long Footboards 3-Hole Disc Wheels Accessory Pack Length 56mm - Era 7 - N Scale

Graham Farish 14T Anchor-Mounted Tank Wagon 'Benzene' Silver 855 (N)

14T Anchor-Mounted Tank Wagon 'Benzene' Silver 855 Features: Pristine ‘Benzene’ Silver livery Running No. 855 Class A Tank Central Catwalk Cranked Air Vent 3-Hole Disc Wheels NEM Coupling Pockets Length 43mm - Era 4 - N Scale

Graham Farish 14T Anchor-Mounted Tank Wagon 'Gulf' Blue 79 (N)

14T Anchor-Mounted Tank Wagon 'Gulf' Blue 79 Features: Pristine ‘Gulf’ Blue livery Running No. 79 Class B Tank Offset Catwalk with Ladders Straight Air Vent Bottom Outlet Pipe and Handwheel Steam Heating Inlet Valve 3-Hole Disc Wheels NEM Coupling Pockets Length 43mm - Era 4 - N Scale

Graham Farish 14T Anchor-Mounted Tank Wagon 'Gulf' Blue 93 (N)

14T Anchor-Mounted Tank Wagon 'Gulf' Blue 93 Features: Pristine ‘Gulf’ Blue livery Running No. 93 Class B Tank Offset Catwalk with Ladders Straight Air Vent Bottom Outlet Pipe and Handwheel Steam Heating Inlet Valve 3-Hole Disc Wheels NEM Coupling Pockets - Era 4 - N Scale

Graham Farish 14T Anchor-Mounted Tank Wagon 'National Benzole' Silver 855 (N)

14T Anchor-Mounted Tank Wagon 'National Benzole' Silver 855 Features: Pristine ‘National Benzole’ Silver livery Running No. 855 Class A Tank Central Catwalk Cranked Air Vent 3-Hole Disc Wheels NEM Coupling Pockets Length 43mm - Era 4 - N Scale

Graham Farish 14T Anchor-Mounted Tank Wagon 'National Benzole' Silver 861 (N)

14T Anchor-Mounted Tank Wagon 'National Benzole' Silver 861 Features: Pristine ‘National Benzole’ Silver livery Running No. 861 Class A Tank Central Catwalk Cranked Air Vent 3-Hole Disc Wheels NEM Coupling Pockets Length 43mm - Era 4 - N Scale

Graham Farish SE&CR 25T 'Dance Hall' Brake Van BR Dept Olive Green 'DS55464'

SE&CR 25T 'Dance Hall' Brake Van BR Departmental Olive Green 'DS55464' Never before available in N scale, this Graham Farish model depicts the South Eastern and Chatham Railway’s (SE&CR) 25 Ton Goods Brake which became known as the ‘Dance Halls’ owing to the spacious cabin provided for the Guard. Designed and built by the SE&CR, the Southern Railway (SR) built further examples after Grouping before designing their own version – the 25 Ton ‘Pill Box’ Brake Van (models of which are also produced by Graham Farish) – which afforded a Guard much less covered accommodation. Whilst the final example was built during the 1920s, the Dance Halls were long lived with some surviving through to the late-twentieth century having been granted a second life in departmental use. The model carries a wealth of detail, from the finely moulded planking of the body sides and ends, to the underframe which features brake and spring detail on the underside. The glazed cabin affords views inside, and through the whole length of the model, which is adorned with numerous separately fitted parts, like the metal handrails and the distinctive foot boards which stretch the length of the vehicle. Features: Pristine BR Departmental Olive Green livery Running No. DS55464 Accessory Pack NEM Coupling Pockets Length 55mm - Era 6 - N Scale

Graham Farish SE&CR 25T 'Dance Hall' Brake Van BR Dept Olive Green 'DS55466'

SE&CR 25T 'Dance Hall' Brake Van BR Departmental Olive Green 'DS55466' Never before available in N scale, this Graham Farish model depicts the South Eastern and Chatham Railway’s (SE&CR) 25 Ton Goods Brake which became known as the ‘Dance Halls’ owing to the spacious cabin provided for the Guard. Designed and built by the SE&CR, the Southern Railway (SR) built further examples after Grouping before designing their own version – the 25 Ton ‘Pill Box’ Brake Van (models of which are also produced by Graham Farish) – which afforded a Guard much less covered accommodation. Whilst the final example was built during the 1920s, the Dance Halls were long lived with some surviving through to the late-twentieth century having been granted a second life in departmental use. The model carries a wealth of detail, from the finely moulded planking of the body sides and ends, to the underframe which features brake and spring detail on the underside. The glazed cabin affords views inside, and through the whole length of the model, which is adorned with numerous separately fitted parts, like the metal handrails and the distinctive foot boards which stretch the length of the vehicle. Features: Pristine BR Departmental Olive Green livery Running No. DS55466 Accessory Pack NEM Coupling Pockets Length 55mm - Era 6 - N Scale

Graham Farish SE&CR 25T 'Dance Hall' Brake Van BR Grey 'S55457'

SE&CR 25T 'Dance Hall' Brake Van BR Grey 'S55457' Never before available in N scale, this Graham Farish model depicts the South Eastern and Chatham Railway’s (SE&CR) 25 Ton Goods Brake which became known as the ‘Dance Halls’ owing to the spacious cabin provided for the Guard. Designed and built by the SE&CR, the Southern Railway (SR) built further examples after Grouping before designing their own version – the 25 Ton ‘Pill Box’ Brake Van (models of which are also produced by Graham Farish) – which afforded a Guard much less covered accommodation. Whilst the final example was built during the 1920s, the Dance Halls were long lived with some surviving through to the late-twentieth century having been granted a second life in departmental use. The model carries a wealth of detail, from the finely moulded planking of the body sides and ends, to the underframe which features brake and spring detail on the underside. The glazed cabin affords views inside, and through the whole length of the model, which is adorned with numerous separately fitted parts, like the metal handrails and the distinctive foot boards which stretch the length of the vehicle. Features: Pristine BR Grey livery Running No. S55457 Accessory Pack NEM Coupling Pockets Length 55mm - Era 4 - N Scale

Graham Farish SE&CR 25T 'Dance Hall' Brake Van SE&CR Grey '11905'

SE&CR 25T 'Dance Hall' Brake Van SE&CR Grey '11905' Never before available in N scale, this Graham Farish model depicts the South Eastern and Chatham Railway’s (SE&CR) 25 Ton Goods Brake which became known as the ‘Dance Halls’ owing to the spacious cabin provided for the Guard. Designed and built by the SE&CR, the Southern Railway (SR) built further examples after Grouping before designing their own version – the 25 Ton ‘Pill Box’ Brake Van (models of which are also produced by Graham Farish) – which afforded a Guard much less covered accommodation. Whilst the final example was built during the 1920s, the Dance Halls were long lived with some surviving through to the late-twentieth century having been granted a second life in departmental use. The model carries a wealth of detail, from the finely moulded planking of the body sides and ends, to the underframe which features brake and spring detail on the underside. The glazed cabin affords views inside, and through the whole length of the model, which is adorned with numerous separately fitted parts, like the metal handrails and the distinctive foot boards which stretch the length of the vehicle. Features: Pristine SE&CR Grey livery Running No. 11905 Accessory Pack NEM Coupling Pockets Length 55mm - Era 2 - N Scale

Graham Farish SE&CR 25T 'Dance Hall' Brake Van SR Brown '55462'

SE&CR 25T 'Dance Hall' Brake Van SR Brown '55462' Never before available in N scale, this Graham Farish model depicts the South Eastern and Chatham Railway’s (SE&CR) 25 Ton Goods Brake which became known as the ‘Dance Halls’ owing to the spacious cabin provided for the Guard. Designed and built by the SE&CR, the Southern Railway (SR) built further examples after Grouping before designing their own version – the 25 Ton ‘Pill Box’ Brake Van (models of which are also produced by Graham Farish) – which afforded a Guard much less covered accommodation. Whilst the final example was built during the 1920s, the Dance Halls were long lived with some surviving through to the late-twentieth century having been granted a second life in departmental use. The model carries a wealth of detail, from the finely moulded planking of the body sides and ends, to the underframe which features brake and spring detail on the underside. The glazed cabin affords views inside, and through the whole length of the model, which is adorned with numerous separately fitted parts, like the metal handrails and the distinctive foot boards which stretch the length of the vehicle. Features: Pristine SR Brown livery Running No. 55462 Accessory Pack NEM Coupling Pockets Length 55mm - Era 3 - N Scale

Graham Farish BR 16T Steel Mineral Wagon w/Top Flap Doors BR Grey [W] B168339

BR 16T Steel Mineral Wagon with Top Flap Doors BR Grey [W] B168339 Coal fuelled Britain during the twentieth century and much of this fuel was transported by rail. The 16 Ton Steel Mineral Wagon began as a wartime design, but following Nationalisation hundreds of thousands of these humble four wheel wagons would be ordered by BR to move coal around the UK, replacing the wooden-bodied wagons that had been inherited from the ‘Big Four’ railway companies and private owners. This Graham Farish model depicts a wagon with end doors, and side doors which have top flaps – this aided manual unloading in coal yards – and the model features separately fitted door stops, brake gear, linkage and hand brake levers, and is fitted with metal buffers. Features: Weathered BR Grey livery Running No. B168339 Length 41mm - Era 4 - N Scale  

Graham Farish BR OBA Open Wagon Low Ends BR Railfreight Red & Grey

BR OBA Open Wagon Low Ends BR Railfreight Red & Grey Designed as a replacement for the Tube Wagons – many of which BR had inherited at Nationalisation or built themselves during the early-BR period – the OBA Open Wagon was designed to transport general merchandise. Large side doors aided loading and various tethering points were integrated into the floors of these air-braked wagons. The Graham Farish model is available with Low or High Ends – this particular example depicts a wagon with Low Ends – and features fine mouldings throughout, in particular the door stops, separately fitted brake equipment and handbrake levers, and metal buffer heads. MODEL FEATURES: Pristine BR Railfreight Red & Grey livery Running No. 110548 NEM Coupling Pockets Length 77mm - Era 7 - N Scale

Graham Farish BR OBA Open Wagon Low Ends BR Railfreight Red & Grey 110555

BR OBA Open Wagon Low Ends BR Railfreight Red & Grey 110555 Designed as a replacement for the Tube Wagons – many of which BR had inherited at Nationalisation or built themselves during the early-BR period – the OBA Open Wagon was designed to transport general merchandise. Large side doors aided loading and various tethering points were integrated into the floors of these air-braked wagons. The Graham Farish model is available with Low or High Ends – this particular example depicts a wagon with Low Ends – and features fine mouldings throughout, in particular the door stops, separately fitted brake equipment and handbrake levers, and metal buffer heads. MODEL FEATURES: Pristine BR Railfreight Red & Grey livery Running No. 110555 NEM Coupling Pockets Length 77mm - Era 7 - N Scale

Graham Farish BR OBA Open Wagon Low Ends EWS (Unbranded)

BR OBA Open Wagon Low Ends EWS (Unbranded) Designed as a replacement for the Tube Wagons – many of which BR had inherited at Nationalisation or built themselves during the early-BR period – the OBA Open Wagon was designed to transport general merchandise. Large side doors aided loading and various tethering points were integrated into the floors of these air-braked wagons. The Graham Farish model is available with Low or High Ends – this particular example depicts a wagon with Low Ends – and features fine mouldings throughout, in particular the door stops, separately fitted brake equipment and handbrake levers, and metal buffer heads. MODEL FEATURES: Pristine EWS (Unbranded) livery Running No. 110125 NEM Coupling Pockets Length 77mm - Era 9 - N Scale - N Scale

Graham Farish BR OBA Open Wagon Low Ends EWS (Unbranded) Running No. 110353

BR OBA Open Wagon Low Ends EWS (Unbranded) Running No. 110353 Designed as a replacement for the Tube Wagons – many of which BR had inherited at Nationalisation or built themselves during the early-BR period – the OBA Open Wagon was designed to transport general merchandise. Large side doors aided loading and various tethering points were integrated into the floors of these air-braked wagons. The Graham Farish model is available with Low or High Ends – this particular example depicts a wagon with Low Ends – and features fine mouldings throughout, in particular the door stops, separately fitted brake equipment and handbrake levers, and metal buffer heads. MODEL FEATURES: Pristine EWS (Unbranded) livery Running No. 110353 NEM Coupling Pockets Length 77mm - Era 9 - N Scale  

Graham Farish BR 16T Steel Mineral Wagon with Top Flap Doors BR Grey [W]

BR 16T Steel Mineral Wagon with Top Flap Doors BR Grey [W] Coal fuelled Britain during the twentieth century and much of this fuel was transported by rail. The 16 Ton Steel Mineral Wagon began as a wartime design, but following Nationalisation hundreds of thousands of these humble four wheel wagons would be ordered by BR to move coal around the UK, replacing the wooden-bodied wagons that had been inherited from the ‘Big Four’ railway companies and private owners. This Graham Farish model depicts a wagon with end doors, and side doors which have top flaps – this aided manual unloading in coal yards – and the model features separately fitted door stops, brake gear, linkage and hand brake levers, and is fitted with metal buffers. MODEL FEATURES: Weathered BR Grey livery Running No. B161589 Length 41mm - Era 4 - N Scale

Graham Farish 13T High Sided Open Wagon LNER Grey (N)

13T High Sided Open Wagon LNER Grey - N Scale