DCC Concepts Inter-Baseboard Connectors (2 Pack)

Inter-Baseboard Connectors (2 Pack) These clever pluggable screw-terminal connectors allow you to easily connect baseboard power with plug-and-socket connections! Suitable for DC or DCC on systems up to 5 Amps. Includes: - 2x Pluggable Screw-Terminal Connectors - Ferruled Connector Wire - Fixing Screws - Spare Ferrules (will require a crimping tool to use the spares)

DCC Concepts Cobalt Barrel-Plug Adapter (3 Pack)

Cobalt Barrel-Plug Adapter (3 Pack) Includes: A pack of three coaxial DC barrel plug adapters that will let you connect bare wires to a DC-plug fitted power supply that takes away the need to cut the plug off and get the soldering iron out. Suitable for the following DCCconcepts power supplies: - DCP-PS12 - DCP-12.3.XX - DCP-18.2.XX - DCP-18.5.XX

DCC Concepts Cobalt iP Digital Point Motor (Single)

Cobalt iP Digital Point Motor (Single) - Any Scale Includes: - 1x Digital Point motor - Instruction manual  - Product Size:   - Width 28.5mm (67mm over the mounting wings)   - Depth 40mm (48mm over the mounting wings)   - Height 44mm (67mm over the connector) - Bag of attachments Features: The Cobalt-iP Digital’s super-low static current draw means very low power bus loading and the Cobalt-iP Digital is also able to cope with a very wide range of DC or DCC power supply voltages. We prefer 9~12V regulated power for DC, but any DCC voltage from 7 to 23 volts is acceptable. Cobalt-iP Digital is supplied with the throw bar already centred for easy installation. You can activate and de-activate self-centring and even swap the throw direction with a simple software command. This allows easy matching to layout needs, software driven computer displays, track diagrams or computer control. With Cobalt-IP “Intelligent Power” Digital Motors, you also have all the connection versatility you could ever need already built in. Frog power needs only one added wire, and a totally separate SPDT changeover switch can facilitate interlocking, control of signal feather indicators or ground signals, etc. Cobalt iP Digital also features the ability to add panel switches or control via DCC. The connection terminals used for panel switch connection are also able to give direct high/low state computer or DCC system feedback, so one motor really CAN do it all. Add to the above the ability to work with DC and super-simple wiring or DCC operation, or to combine digital and analog control… and Cobalt iP Digital really is the best choice for all layouts, no matter how you choose to power the trains!

DCC Concepts DCS-MSET Mega Screw Set 16x 60 Vials (w/20 Drill Bit set)

Mega Screw Set 16x 60 Vials (w/20 Drill Bit set)   Mega set of 16 vials each containing 60 panhead (60x 1.0x3mm, 60x 1.0x5mm, 60x 1.0x8mm, 60x 1.5x4mm, 60x 1.5x6mm, 60x 1.5x8mm, 60x 2.0x5mm, & 60x 2.0x8mm) 60 countersunk screws (60x 1.0x3mm, 60x 1.0x5mm, 60x 1.0x8mm, 60x 1.5x4mm, 60x 1.5x6mm, 60x 1.5x8mm, 60x 2.0x5mm, & 60x 2.0x8mm) Set also comes with a 20 piece drillset with HSS titanium covered drills covering 0.3 to 1.6mm. NOTES - screws are now BLACK in colour            - Packaging can vary and might be slightly different from image

DCC Concepts 12-Way Pluggable Connectors (2 pairs)

12-Way Pluggable Connectors (2 pairs) Two pairs of 12 way pluggable connectors, suitable for heavy power connection between baseboards or perhaps the creation of an ‘easy disconnection’ structure between DCC systems and layout, these heavy duty tag strips are able to take a wide range of wires. They are a very strong connector that will last forever! Screws are brass and all pins/sockets are plated solid brass.

DCC Concepts Cobalt SS Medium 600mm Extension Leads (3)

Cobalt SS Medium 600mm Extension Leads (3) Includes - Use these cables to control your Cobalt-SS motors in pairs, either both moving in the same direction, or moving opposite each other.

DCC Concepts DCD-ZNM.HP.6 Zen Black Decoder Midi-Sized 8PIN Harness 6 Fct

DCD-ZNM.HP.6 Zen Black Decoder Midi-Sized 8PIN Harness 6 Fct Includes – 3 Amps peak power– 1.5 Amps continuous RMS power– 6 functions (2x 250mA, 4x 100mA)– Size 30mm x 18.3mm x 6mm– 8-pin harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Brown-Out Protection on-board

DCC Concepts DCD-ZNmini.4 Zen Black Decoder Mini 8Pin

DCD-ZNmini.4 Zen Black Decoder Mini 8Pin Includes – 1.1 Amps peak power– 750mA continuous power– 4 functions at 100mA each– 19mm x 11mm x 6mm– 8-pin & harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Brown-Out Protection on-board– Stay-Alive connection

DCC Concepts DCD-ZBHP.6 Zen Black Buddha Decoder O & Larger Scale

DCD-ZBHP.6 Zen Black Buddha Decoder O & Larger Scale Includes  – 5 Amps peak power– 3 Amps continuous power– 6 functions at 250mA each– On-board high-power stay-alive– 42mm x 27mm x 13mm– 12 screw terminals– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)

DCC Concepts DCD-ZN68.2 Zen Blue+Decoder NEM651 6-Pin Direct/ Harness 2 Funct

DCD-ZN68.2 Zen Blue+Decoder NEM651 6-Pin Direct/ Harness 2 Funct Includes - 1.1Amps Peak Power - 750mA Continuous power - 2 Functions at 100mA each - Dimensions 13.5mm x 8.5mm - 6 PIN Direct, 6 PIN Harness and 8 PIN Harness - One step loco setup  

DCC Concepts DCC Decoder Convertor 3 Wire to 2 Wire (3)

DCC Decoder Convertor 3 Wire to 2 Wire (3) - Pack of three solenoid decoders. - The SDC is a clever wee device that takes the outputs from a 3-wire accessory decoder and turns them into a 2-wire reversing DC decoder, allowing you to use most solenoid accessory decoders to power Kato, Cobalt or other brands of point motor. - Please note that for motor drive decoders you will also need to set ‘power on’ time for between 2 and 4 seconds.