Peco TT Gauge - Steel Plate Bridge, Brick Abutments, Double Track

TT Gauge - Steel Plate Bridge, Brick Abutments, Double Track

Peco TT Gauge - Steel Plate Bridge, Brick Abutments, Single Track

TT Gauge - Steel Plate Bridge, Brick Abutments, Single Track

Peco TT Gauge - Brick Bridge, Double Track

TT Gauge - Brick Bridge, Double Track

Peco TT Gauge - Brick Bridge, Single Track

TT Gauge - Brick Bridge, Single Track

Peco TT Gauge - Tunnel Portals with wing walls, Brick, Double Track

TT Gauge - Tunnel Portals with wing walls, Brick, Double Track

Peco TT Gauge - Tunnel Portals with wing walls, Brick, Single Track (

TT Gauge - Tunnel Portals with wing walls, Brick, Single Track  

Peco TT Gauge - Tunnel Portals with wing walls, Stone, Double Track

TT Gauge - Tunnel Portals with wing walls, Stone, Double Track

Peco TT Gauge - Tunnel Portals with wing walls, Stone, Single Track

TT Gauge - Tunnel Portals with wing walls, Stone, Single Track

Hornby YGB Seacow Civil Engineers "Dutch" 980100 (TT)

YGB Seacow Civil Engineers "Dutch" 980100 Civil Engineers YGB Seacow Wagon 980100 is a newly tooled model with a 'Dutch' Grey and Yellow livery. Featuring intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell, it carries number DB980100.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: ‘Dutch’ Grey and Yellow Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGH Sealion Civil Engineers "Dutch" 982838 (TT)

YGH Sealion Civil Engineers "Dutch" 982838 This model is an accurate depiction of Civil Engineers 982838 YGH Sealion Wagon, in its 'Dutch' Grey and Yellow livery. It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius Livery: ‘Dutch’ Grey and Yellow Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGH Sealion Departmental Olive 982786, 982788, & 982791 (TT)

YGH Sealion Departmental Olive Green 982786, 982788, & 982791 Triple Pack The newly tooled Civil Engineers YGH Sealion Wagon Triple Pack depicts numbers DB982786, DB982788, and DB982791 in Departmental Olive Green.  They feature intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision-moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: Departmental Olive Green Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGH Sealion Departmental Olive Green 982792 (TT)

YGH Sealion Departmental Olive Green 982792 In the elegant Departmental Olive Green livery, this Civil Engineers YGH Sealion Wagon is a newly tooled delight. It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: Departmental Olive Green Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGA Seacow EWS 980076 (TT)

YGA Seacow EWS 980076  This newly tool EWS YGA Seacow Wagon 980076 displays a striking maroon livery. It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: EWS Maroon Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGB Seacow Civil Engineers "Dutch" 980062, 980049, & 980074 (TT)

YGB Seacow Civil Engineers "Dutch" 980062, 980049, & 980074 Triple Pack  This newly tooled Civil Engineers YGB Seacow Wagon Triple Pack includes numbers DB980062, DB980049, and DB980074 in a stylish Grey and Yellow livery.  It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision-moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius Livery: Civil Engineers ‘Dutch’ Grey & Yellow Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby Coalfield Freight Class 37 Train Set (Sound Fitted) (TT)

Coalfield Freight Class 37 Train Set (Sound Fitted) Take a step back in time with ‘Coalfield Freight’ Train Set, the perfect introduction into the terrific world of TT:120 gauge from Hornby.  Whether you’re a beginner, returning to the hobby or a seasoned railway modeller, this starter set has everything you need to get started in the space-saving scale of ‘Tabletop’ TT:120. This set includes a highly detailed model of a Class 37 Diesel locomotive, three colourful wagons, oval starter track, siding and controller. Not only is this set easy to build and endlessly entertaining, the well-designed and durable TT:120 locomotives mean you can rest assured your train set will work for many years to come. With a plethora of separately available extension track packs, rolling stock, buildings and accessories, the possibilities for expanding your collection are endless! Inside the box, you’ll find a highly detailed, motorised diesel locomotive alongside three British Railway freight hopper wagons, each beautifully decorated. The set includes all the track you need to create your miniature railway, as well as an electric controller for smooth operation. Includes: BR Class 37 37799 'Sir Dyfed County of Dyfed' in Triple Grey Coal Sector Livery 3x HFA MGR Coal Hoppers in Coal Sector Livery 3rd Radius Oval of Track with siding (125cm x 84cm) Wall Plug Transformer DCC Power Connecting Track Re-Railer - TT:120 Scale

Hornby Coalfield Freight Class 37 Train Set (TT)

Coalfield Freight Class 37 Train Set Take a step back in time with ‘Coalfield Freight’ Train Set, the perfect introduction into the terrific world of TT:120 gauge from Hornby.  Whether you’re a beginner, returning to the hobby or a seasoned railway modeller, this starter set has everything you need to get started in the space-saving scale of ‘Tabletop’ TT:120. This set includes a highly detailed model of a Class 37 Diesel locomotive, three colourful wagons, oval starter track, siding and controller. Not only is this set easy to build and endlessly entertaining, the well-designed and durable TT:120 locomotives mean you can rest assured your train set will work for many years to come. With a plethora of separately available extension track packs, rolling stock, buildings and accessories, the possibilities for expanding your collection are endless! Inside the box, you’ll find a highly detailed, motorised diesel locomotive alongside three British Railway freight hopper wagons, each beautifully decorated. The set includes all the track you need to create your miniature railway, as well as an electric controller for smooth operation. Includes: BR Class 37 37799 'Sir Dyfed County of Dyfed' in Triple Grey Coal Sector Livery 3x HFA MGR Coal Hoppers in Coal Sector Livery 3rd Radius Oval of Track with siding (125cm x 84cm) DC Train Controller Wall Plug Transformer Power Connecting Track Re-Railer - TT:120 Scale

Hornby LNER Class A4 4498 'Sir Nigel Gresley' LNER Garter Blue (TT)

LNER Class A4 4498 'Sir Nigel Gresley' LNER Garter Blue Built at the Doncaster works in 1937, 4498 Sir Nigel Gresley entered service in October 1937 on the London and Northeast Railway.  This model represents the locomotive in 1930’s condition with full valances and in its classic Garter blue paint scheme. A HM7000-Next18 sound decoder can be fitted for digital control and realistic A4 Class sound effects using the free to download A4 sound profile. Specific to TT3043: A4 locomotive 4498 in Garter blue with ‘Sir Nigel Gresley’ Name plates. Single Chimney. Full valances. 1928 Corridor Tender. Common TT A4 Class Features: High detail TT Scale model based on extensive research including and original works drawings. Heavy diecast chassis. Model Weight is 150 grams. High precision coreless motor. Brass axle bearings. Locomotive and Tender wheel electrical pickups. Kinematic rear coupling system. Pre-fitted acoustic speaker chamber and Sugarcube speaker. Next-18 Decoder socket. Metal buffers. Separately fitted brass safety valves and whistle. Separately fitted metal handrails. Accessory bag contains optional fit flanged trailing track wheelset, vacuum pipes and couplings. - TT:120 Scale

Hornby Curve - 2nd Radius (TT)

Curve - 2nd Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 30 degree code 80 track piece, with a 310mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Diamond Crossing Left Hand (TT)

Diamond Crossing Left Hand The diamond crossing is a piece of track used when you wish to pass one line through another. This is electrically isolated to prevent shorts and can be used to create complex track work. This code 80 track piece, 166mm long, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Diamond Crossing Right Hand (TT)

Diamond Crossing Right Hand  The diamond crossing is a piece of track used when you wish to pass one line through another. This is electrically isolated to prevent shorts and can be used to create complex track work. This code 80 track piece, 166mm long, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Y Point (TT)

Y Point  To create parallel tracks from TT8043 'Y' point use two TT8049 section curves.Hornby points are supplied for operation by hand. They may be converted to remote control electric operation by using a 'point motor'. - TT:120 Scale

Hornby Curve - 6th Radius - 7 Degree (TT)

Curve - 6th Radius - 7 Degree  Extend your model railway layout with this Hornby Curve 6th Radius 7 Degree piece.Ideal for those long-time railway collectors of those just starting out building their layout. - TT:120 Scale

Hornby Class 66 66850 'David Maidment OBE' Colas (TT) (Sound Fitted)

Class 66 66850 'David Maidment OBE' Colas (TT) (Sound Fitted) This model will feature directional and cab lighting. Night and day headlights will also be included. All the Class 66 models have 12 axles for the current pick-up and both bogies are motor-driven. - SOUND FITTED *Requires HM7000 APP or DCC controller to operate sounds and drive model. (Will not operate on analogue) - Era 11 - TT:120 Scale

Hornby Class 66 66850 'David Maidment OBE' Colas Rail (TT)

Colas Rail, Class 66, Co-Co, 66850, 'David Maidment OBE' This model will feature directional and cab lighting. Night and day headlights will also be included. All the Class 66 models have 12 axles for the current pick-up and both bogies are motor-driven. - DCC Ready NEXT18 Socket - Era 11 - TT:120 Scale

Hornby Inter-City 125 High Speed Digital Train Set (Sound Fitted) (TT)

Inter-City 125 High Speed Digital Train Set (With Sound) This train set includes: Class 43 HST power car numbered E43063 Class 43 HST dummy car numbered E43062 two Mk3 TS coaches numbered E42064 and E42065 a transformer a buffer stop a full curve a power straight a standard straight a 3rd full curve a left-hand point a re-railer. No.E43062 No. E43062 was built by British Rail Engineering Limited at Crewe in September 1977 and was outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43062 was initially part of the 254004 set. It was repainted in an InterCity Swallow livery after a few years in service. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997, including 43062. The Class 43 locomotive was repainted in a Virgin red and black livery for use on CrossCountry services. Virgin handed over ten HST power cars in 2002. 43062 was given to Network Rail for use as part of the New Measurement Train (NMT). The locomotive was outshopped in a bright Network Rail yellow livery and because of this, the train was often referred to as the ‘Flying Banana’. The NMT travels at 125mph to monitor and record any faults on the track. 43062 was named ‘John Armitt’ after the chairman of the UK’s National Infrastructure Commission and had a red nameplate fitted. Loram UK won a Network Rail £8-million five-year contract to maintain the NMT in 2020. 43062 was recently overhauled at Loram Derby and returned to traffic in January 2024 with No. 43257 at the rear. No. E43063 No. E43063 was built by British Rail Engineering Limited at Crewe in September 1977 and outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43063 was initially part of the 254004 set. On 18th May 1991, 43063 could be seen at the Laira depot in a repainted InterCity Swallow livery and continued in service with this livery until 1997. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997. 43063 was the first locomotive to be repainted in a Virgin CrossCountry red and black livery. Hon. Lord James Douglas-Hamilton QC & MP named the locomotive ‘Maiden Voyager’ to mark the launch of Virgin CrossCountry services, the same name given to Virgin’s first jumbo jet. Nameplates were fitted at Edinburgh station on 6th January 1997. 43063 ran in service with this name until the nameplates were removed in October 1999. In 2002, Virgin handed over 43063 to FGW who repainted it in a FGW blue and purple livery. Between 2006 and 2007, the locomotive faced an overhaul at Brush Traction and was fitted with an MTU 16V4000 R41 engine. FGW was renamed Great Western Railway in September 2015 and 43063 continued in service under the new name. Six GWR Class 43 HST power cars were stored at the Laira depot in 2020 and 43063 was among them, becoming a spares donor. - TT:120 Scale

Hornby Inter-City 125 High Speed Train Set (TT)

Inter-City 125 High Speed Train Set This train set includes: Class 43 HST power car numbered E43063 Class 43 HST dummy car numbered E43062 two Mk3 TS coaches numbered E42064 and E42065 a transformer a train controller a buffer stop a full curve a power straight a standard straight a 3rd full curve a left-hand point a re-railer. No.E43062 No. E43062 was built by British Rail Engineering Limited at Crewe in September 1977 and was outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43062 was initially part of the 254004 set. It was repainted in an InterCity Swallow livery after a few years in service. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997, including 43062. The Class 43 locomotive was repainted in a Virgin red and black livery for use on CrossCountry services. Virgin handed over ten HST power cars in 2002. 43062 was given to Network Rail for use as part of the New Measurement Train (NMT). The locomotive was outshopped in a bright Network Rail yellow livery and because of this, the train was often referred to as the ‘Flying Banana’. The NMT travels at 125mph to monitor and record any faults on the track. 43062 was named ‘John Armitt’ after the chairman of the UK’s National Infrastructure Commission and had a red nameplate fitted. Loram UK won a Network Rail £8-million five-year contract to maintain the NMT in 2020. 43062 was recently overhauled at Loram Derby and returned to traffic in January 2024 with No. 43257 at the rear. No. E43063 No. E43063 was built by British Rail Engineering Limited at Crewe in September 1977 and outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43063 was initially part of the 254004 set. On 18th May 1991, 43063 could be seen at the Laira depot in a repainted InterCity Swallow livery and continued in service with this livery until 1997. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997. 43063 was the first locomotive to be repainted in a Virgin CrossCountry red and black livery. Hon. Lord James Douglas-Hamilton QC & MP named the locomotive ‘Maiden Voyager’ to mark the launch of Virgin CrossCountry services, the same name given to Virgin’s first jumbo jet. Nameplates were fitted at Edinburgh station on 6th January 1997. 43063 ran in service with this name until the nameplates were removed in October 1999. In 2002, Virgin handed over 43063 to FGW who repainted it in a FGW blue and purple livery. Between 2006 and 2007, the locomotive faced an overhaul at Brush Traction and was fitted with an MTU 16V4000 R41 engine. FGW was renamed Great Western Railway in September 2015 and 43063 continued in service under the new name. Six GWR Class 43 HST power cars were stored at the Laira depot in 2020 and 43063 was among them, becoming a spares donor. - TT:120 Scale

Hornby Track Power Connecting Pins (4) (TT)

Track Power Connecting Pins (4) (TT) This pack of four pins allows for wires from non-Hornby controllers to be easily connected to the Hornby power track and power clip pieces. This enables you to use your favourite controller with your TT layout. - TT:120 Scale

Hornby Uncoupling Ramp (TT)

Uncoupling Ramp (TT) The uncoupler ramp allows you to disconnect your rolling stock and locomotives without having to remove them from the rails. This simply connects to existing unballasted track and can then be operated by hand or with a Hornby point motor. - TT:120 Scale

Hornby DCC Track Turnout Clips (pack of 20) (TT)

DCC Track Turnout Clips (pack of 20) (TT) These clips circumvent the built in isolation in our points, allowing power to always flow which is required for digital running. These clips do also have certain specific uses for analogue running. - TT:120 Scale

Hornby Digital Power Connecting Clip (TT)

Digital Power Connecting Clip (TT) An essential part of any digital layout, the digital power connecting clip is an easy way to connect your layout to the output of your digital controller. - TT:120 Scale

Hornby Digital Power Connecting Track (TT)

Digital Power Connecting Track (TT) An essential part of any digital layout, the digital power connecting track is an easy way to connect your layout to the output of your digital controller. This code 80 track piece, 166mm long, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Track Pack 2 (TT)

Track Pack 2 Easily extend your TT train set with this track extension pack. The packs should be added in order, and doing so will leave you with a large and satisfying layout allowing you to run trains all day long. Includes: - 6 x TT8004, - 1 x TT8007 - 1 x TT8009 - 3 x TT8002 - 1 x TT8010

Hornby Track Pack 3 (TT)

Track Pack 3  Easily extend your TT train set with this track extension pack. The packs should be added in order, and doing so will leave you with a large and satisfying layout allowing you to run trains all day long. This track pack contains code 80 track compatible with individual code 80 track pieces. Includes: - 6 x TT8004, - 1 x TT8006, - 2 x TT8009

Hornby Railer (TT)

Railer This makes it easy for you to get trains running, ideal for younger modellers or those who find it difficult lining up small track and flanges. This is simply placed over the track, and your stock pushed down it like a ramp lining everything up perfectly. - TT:120 Scale

Hornby Curve - 3rd radius (TT)

Curve - 3rd radius (TT) The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 30 degree code 80 track piece, with a 353mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Curve - 1st Radius (TT)

Curve - 1st Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 30 degree code 80 track piece, with a 267mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Peco Setrack TT:120 Short Straight (4) C55

Setrack TT:120 Short Straight (4) C55 - Code 55 - 4 in a pack - TT:120 Scale

Peco Setrack TT:120 Standard Straight (4) C55

Setrack TT:120 Standard Straight (4) C55 - Code 55 - 4 in a pack - TT:120 Scale

Peco Setrack TT:120 Double Straight (4) C55

Setrack TT:120 Double Straight (4) C55 - Code 55 - 4 in a pack - TT:120 Scale

Peco Setrack TT:120 No.2 Radius Double Curve (4) C55

Setrack TT:120 No.2 Radius Double Curve (4) C55 - Code 55 - 4 in a pack - TT:120 Scale

Peco Setrack TT:120 No.2 Radius Half Curve (4) C55

Setrack TT:120 No.2 Radius Half Curve (4) C55 - Code 55 - 4 in a pack - TT:120 Scale

Peco Setrack TT:120 No.2 Radius Standard Curve (8) C55

Setrack TT:120 No.2 Radius Standard Curve (8) C55 - Code 55 - 8 in a pack - TT:120 Scale

Hornby Half Curve - 1st Radius (TT)

Half Curve - 1st Radius The backbone of any model railway, this half-length of curved track will help you create complex refined trackwork in a siding off the main line. This code 80 track piece is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Half Curve - 2nd Radius (TT)

Half Curve - 2nd Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 15 degree code 80 track piece, with a 310mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Half Curve - 3rd Radius (TT)

Half Curve - 3rd Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 15 degree code 80 track piece, with a 353mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Half Curve - 4th Radius (TT)

Half Curve - 4th Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 15 degree code 80 track piece, with a 396mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Half Straight Track (TT)

Half Straight Track This is a half straight track piece, allowing some more refinement for circuit building and an easier way to fill your space should you not have enough for a full straight. This code 80 track piece, 83mm long, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Power Connecting Clip (TT)

Power Connecting Clip An essential part of any layout, the power connecting clip is an easy way to connect your layout to the output of your controller. - TT:120 Scale

Hornby Power Connecting Track (TT)

Power Connecting Track An essential part of any layout, the power connecting track is an easy way to connect your layout to the output of your controller. This code 80 track piece, measuring 166mm, is ideal for constructing your layout and is compatible with other code 80 track. - TT120 Scale

Hornby Quarter Curve - 1st Radius (TT)

Quarter Curve - 1st Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 7.5 degree code 80 track piece, with a 267mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Curve - 4th Radius (TT)

Curve - 4th Radius The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 30 degree code 80 track piece, with a 396mm radius, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Curve - 6th Radius (TT) (Curve used on Points to equally up)

Curve - 6th Radius (TT) (Curve used on Points to equally up) The backbone of any model railway, this length of curved track will help you create long sweeping curves on which your trains can be run and admired. This 15 degree code 80 track piece, with a radius of 640mm, is ideal for constructing your layout and is compatible with other code 80 track as well as bringing tracks back to parallel after a point. - TT:120 Scale

Hornby Isolating Fishplates (12) (TT)

Isolating Fishplates (12)  Fishplates are a required part of any model railway. They are essential for the connection of track lengths and play a crucial role in allowing power to pass from each section. For a double loop of track, these isolating fishplates can be fitted so that the locomotive does not pass the points in a certain loop. Use these isolated fishplates for your TT:120 layout. Twelve isolating fishplates are included. - 12 in a pack - TT:120 Scale * THESE CANNOT BE USED WITH PECO TRACK

Hornby Standard Double Straight - 332mm (TT)

Standard Double Straight - 332mm  The backbone of any model railway, this length of straight track will help you create long runs on which your trains can be run and admired. This code 80 track piece, measuring 332mm, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Straight Track - 160mm (TT)

Straight Track - 160mm  The backbone of any model railway, this length of straight track will help you create long runs on which your trains can be run and admired. This code 80 track piece, measuring 166mm, is ideal for constructing your layout and is compatible with other code 80 track. - TT:120 Scale

Hornby Track Pack 5 TT:120

Track Pack 5 Easily extend your TT train set with this track extension pack. The packs should be added in order, and doing so will leave you with a large and satisfying layaout allowing you to run trains all day long. Includes: 1x TT8008 Left Hand Point 166mm 15° 631mm 5x TT8003 Curve - 1st Radius 30° 267mm  1x TT8010 Buffer Stop - TT:120 Scale

Hornby Buffer Stop TT:120

Buffer Stop A buffer stop allows you to cap off the end of any siding, clipping onto the track and preventing any trains from breaking free from the track. - TT:120

Hornby Left Hand Point 166mm 15° 631mm

Left Hand Point 166mm 15° 631mm Point work is an essential part of any model railway, allowing you to connect circuits or create complex shunting yards. This point is left hand, unsurprisingly this means the track spur comes off on the left of the main line. This code 80 track piece is ideal for constructing your layout and is compatible with other code 80 track. Hornby TT:120 points measure 166mm along the main track, with a 15 degree, 640mm track spur. - TT:120 Scale

Hornby Right Hand Point 166mm 15° 631mm (TT)

Right Hand Point 166mm 15° 631mm Point work is an essential part of any model railway, allowing you to connect circuits or create complex shunting yards. This point is right hand, unsurprisingly this means the track spur comes off on the right of the main line. This code 80 track piece is ideal for constructing your layout and is compatible with other code 80 track. Hornby TT:120 points measure 166mm along the main track, with a 15 degree, 640mm track spur. - TT:120 Scale

Hornby Track Pack 1 (TT)

Track Pack 1 Easily extend your TT train set with this track extension pack. The packs should be added in order, and doing so will leave you with a large and satisfying layaout allowing you to run trains all day long. This track pack contains code 80 track compatible with individual code 80 track pieces. Includes: 1x TT8008 Left Hand Point 166mm 15° 631mm 1x TT8007 Curve - 6th Radius 15° 640mm 5x TT8002 Straight Track 166mm 1x TT8010 Buffer Stop - TT:120 Scale

Hornby Track Pack 4 TT:120

Track Pack 4 Easily extend your TT train set with this track extension pack. The packs should be added in order, and doing so will leave you with a large and satisfying layaout allowing you to run trains all day long. Includes: 2x TT8006 Curve - 4th Radius 30° 396mm 1x TT8007 Curve - 6th Radius 15° 640mm 1x TT8009 Right Hand Point 166mm 15° 631mm 2x TT8002 Straight Track 166mm 1x TT8010 Buffer Stop - TT:120 Scale

Hornby The Scotsman Digital Train Set (Sound Fitted) (TT)

The Scotsman Digital Train Set (Sound Fitted) A journey on a Pullman service would be regarded by many as the pinnacle of rail travel in the steam era. The LNER A1 4-6-2 locomotive and complimentary Pullman coaches included in this set represent how the ‘Flying Scotsman’ may have looked in the LNER heyday of the 1930s, that being the Flying Scotsman service and not the somewhat famous locomotive named after it. This service would run non-stop between Edinburgh and London, departing at 10:00 in each direction. This set contains a starter oval of track and a siding providing a good size layout for you to get started. This included circuit can be expanded with our easy to add track extension packs. This set features working lights in the coaches. Includes: 1x LNER A1 4-6-2 'Blink Bonny' Locomotive 1x Pullman Coach 'Cecilia' 1x Pullman Coach 'Chloria' 1x Pullman Brake Coach 'Car No.64 Third Class' Oval of Track Transformer Loco is DCC HM7000 TXS Sound Fitted - TT:120 Scale

Hornby TT Fishplates (20)

Hornby TT Fishplates (20) - Suitable for Hornby TT track Fishplates are a required part of any model railway, these are essential not just for the connecting of track lengths but they also play a crucial role in allowing power to pass from each section. This pack of 20 fishplates will allow you to swap out damaged examples and add plates to lengths of track that may have been modified for custom fitment. * THESE CANNOT BE USED WITH PECO TRACK

Hornby The Scotsman Train Set (TT)

The Scotsman Train Set A journey on a Pullman service would be regarded by many as the pinnacle of rail travel in the steam era. The LNER A1 4-6-2 locomotive and complementary Pullman coaches included in this set represent how the Flying Scotsman™ may have looked in the LNER heyday of the 1930s, that being the Flying Scotsman service and not the somewhat famous locomotive named after it. This service would run non-stop between Edinburgh and London, departing at 10:00 in each direction. This set contains a starter oval of track and a siding providing a good size layout for you to get started. This included circuit can be expanded with our easy-to-add track extension packs. This set features working lights in the coaches. Includes: 1x LNER A1 4-6-2 'Blink Bonny' Locomotive 1x Pullman Coach 'Cecilia' 1x Pullman Coach 'Chloria' 1x Pullman Brake Coach 'Car No.64 Third Class' Oval of Track Controller Loco is DCC Ready NEXT 18 Socket - TT 1:120 Scale  

Peco TT Gauge - Lineside Hut Kit

Lineside Hut Kit Typical of workman and trackside huts up and down the rail network over the last century, ideal for quiet branch lines or busy mainlines. Kit contains 2x Lineside hut kits Includes - Laser cut wooden kit with plastic chimney pot detail and glazing sheet - Kit requires a basic tools (craft knife, needle files) NOT included - Kit requires suitable glue for plastic/wood parts and PVA for the glazing and paints to complete NOT included - TT Gauge (1:120 Scale) 

Peco TT Gauge Long Crossing

Peco - TT Gauge Long Crossing - Unifrog wired point - Use SL310 metal rail joiners and SL1208 joining sleepers. - Length: 180mm - Angle of track: 11.25* - TT Gauge (1:120 Scale)

Peco TT Gauge Small Radius Turnout R/H

Peco - TT Gauge Small Radius Turnout R/H  - Unifrog wired point - Use SL310 metal rail joiners and SL1208 joining sleepers. - Length: 135mm - Exit Angle: 11.25*  - Radius: 466mm - TT Gauge (1:120 Scale)

Peco TT Gauge - GWR Goods Shed Kit

GWR Goods Shed This Small goods shed is based on Bovey in South Devon. The doors can be fixed in either open or closed position and the interior features detailed stonework, roof rafters, loading platform and goods office. Designed to fit over PECO TT:120 Track NOT included  Includes - Laser cut wooden kit with plastic chimney pot detail and glazing sheet. - Length: 100mm - Width: 110mm - Kit requires a basic tools (craft knife, needle files) NOT included - Kit requires suitable glue for plastic/wood parts and PVA for the glazing and paints to complete NOT included - TT Gauge (1:120 Scale) 

Peco TT Gauge Medium Radius Left Hand C55 Unifrog

Medium Radius Left Hand Code 55 - Unifrog wired point - Use SL310 metal rail joiners and SL1208 joining sleepers. - Length: 180mm - Exit Angle: 11.25*  - Radius: Nominal 922.6mm/36.3" - TT Gauge (1:120 Scale)

Peco TT Gauge Medium Radius Right Hand C55 Unifrog

Medium Radius Right Hand Code 55 - Unifrog wired point - Use SL310 metal rail joiners and SL1208 joining sleepers. - Length: 180mm - Exit Angle: 11.25*  - Radius: Nominal 922.6mm/36.3" - TT Gauge (1:120 Scale)  

Peco TT Additional Sleepers - Wooden

Code 55 Additional Sleepers  - Wooden Sleeper type - TT Gauge (1:120 Scale)

Peco TT Gauge Buffer Stop, Rail type

Code 55 Buffer Stop  - Plastic kit  - Rail built type - 4x Buffers in a pack - Piece of Flat bottom rail  to mount buffer stops. - Kit requires glue and paint to complete NOT included - TT Gauge (1:120 Scale)

Peco TT Gauge C55 Flexible Track 914mm Wooden Sleeper

Code 55 Flexible Track Wooden Sleeper, - 914mm in length - Nickel Silver - TT Gauge (1:120 Scale)