Scenecraft Narrow Gauge (NG7) Corrugated Engine Shed

Narrow Gauge (NG7) Corrugated Engine Shed The beauty of many narrow gauge railways is that they could be set up in a matter of weeks, allowing changes to lines or infrastructure – or the moving of the entire railway in the case of the wartime trench railway systems – with little or no notice. As a result, many of the buildings used on narrow gauge lines were relatively simple in their concept and this Corrugated Engine Shed is testament to that. With its corrugated sides and roof and two doors bolted on, this would have been a quick and cheap structure to build – and take down again too, if the requirement ever arose – whilst still providing much needed shelter for the locomotives it housed. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - O-16.5 (NG7) Scale

Scenecraft Narrow Gauge (NG7) Metal Water Tank

Narrow Gauge (NG7) Metal Water Tank This metal water tank plays an essential role in the operation of any steam-worked railway, the provision of water. With a lattice base holding the metal tank above, water is supplied via gravity through a hose connected to the tank – the valve for which is chain operated and on the Scenecraft model, this feature is replicated with real metal chain. Whatever the setting, this model is vital to keep your Bachmann Narrow Gauge steam locomotives watered and ready for service. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - O-16.5 (NG7) Scale

Scenecraft Narrow Gauge (NG7) Corrugated Station Brown & Cream

Narrow Gauge (NG7) Corrugated Station Brown & Cream For many narrow gauge railways, moving passengers was a secondary consideration behind the freight traffic for which most lines had been built to transport. As such, facilities were often minimal meaning small and easy to build structures like this corrugated station were about as much as a traveller could expect as they waited for their train. Despite its narrow gauge origins, this model could serve equally well on a O scale layout or diorama where a small station or halt is required. MODEL FEATURES: NG7 Scale (use with O & O-16.5) Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting!

Scenecraft Narrow Gauge (NG7) Slate Built Workers Cottage

Narrow Gauge (NG7) Slate Built Workers Cottage The majority of buildings found in the UK are constructed from materials that are readily available in the local area, and so it’s no surprise that worker’s cottages were made from slate in places like Wales where the stone was found in abundance. Cottages like these could be found in and around slate quarries to provide miners with accommodation or equally could serve as the home of a railway worker. Whoever the occupants might be, this slate built cottage is the ideal addition to O or NG7 scale layouts or dioramas and can be used in conjunction with the other slate built models available from the Scenecraft range. MODEL FEATURES: NG7 Scale (use with O & O-16.5) Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting!

Scenecraft Narrow Gauge (NG7) Slate Footbridge

Narrow Gauge (NG7) Slate Footbridge Many narrow gauge railways were built to serve the slate industry, working through slate mines and quarries to aid workers in moving slate around the site during the extraction and finishing processes and then, once ready for sale, onwards to transhipment yards. Given the abundance of slate in these locations, the material was used to build much of the infrastructure needed to operate the railways, to the extent that even footbridges were built from slate to provide people with a safe route of passage over the line, particularly when the railway passed through public land on its route to a port or similar transhipment location. MODEL FEATURES: NG7 Scale Highly detailed, hand painted model Fully decorated and ready to place on your layout

Scenecraft Narrow Gauge (NG7) Tunnel Portal

Narrow Gauge (NG7) Tunnel Portal Many narrow gauge railways feature tunnels along their lines, making this Narrow Gauge Tunnel Portal an ideal solution for anyone trying to create a scenic break or an area of hidden track. Large enough to accommodate a single track, this model is both practical and visually appealing with its composition of grey slate and red brick – all of which is hand painted with a typical weathered appearance. MODEL FEATURES: NG7 Scale Highly detailed, hand painted model Fully decorated and ready to place on your layout

Bachmann Narrow Gauge (NG7) Wagon Hook & Loop Couplings and pockets (x5)

Narrow Gauge (NG7) Wagon Hook & Loop Couplings and pockets (x5 pairs) Pack contains 5 x Hooks and 5 x Loops and 10 x Screw-On NEM Coupling Pockets

Peco Bolster Wagons (3) (O-16.5)

Bolster Wagons (3) (O-16.5) Includes: - Laser cut wooden kit - Three wagons in pack - Metal wheels - Brass bearings - Plastic couplings - Clear plastic packaging can be used for glazing (IF required) - Requires suitable glue and paint to complete NOT included - 0-16.5 Scale (NG7/ 7mm/ O Scale)

Scenecraft Narrow Gauge (NG7) Dinorwic Wagon Slate Load (x4)

Narrow Gauge (NG7) Dinorwic Wagon Slate Load (x4) The Dinorwic Quarry was set up to mine the slate found in abundance in parts of North Wales, with the finished slate moved by narrow gauge railways to ports and transhipment sites. Depicting dressed slates ready to leave the quarry, these Slate Loads are suitable for use either on their own as scenic decoration or loaded on to our Bachmann Narrow Gauge NG7 Dinorwic Wagons. Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - NG 7 Scale (O-16.5)

Scenecraft Narrow Gauge (NG7) Footplate Crew (x2 Figures)

Narrow Gauge (NG7) Footplate Crew (x2 Figures) Every locomotive needs a crew, and this Footplate Crew by Scenecraft is designed to be used with both the open-cab and enclosed-cab Quarry Hunslet locomotives in our Bachmann Narrow Gauge NG7 range, along with other 7mm scale steam locomotives. Features: Highly detailed, hand painted figures Fully decorated and ready to place on your layout - NG 7 Scale (O-16.5)

Scenecraft Narrow Gauge (NG7) Slate Built Coal Store

Narrow Gauge (NG7) Slate Built Coal Store Coal Stores would be used to store the coal that was needed to power steam locomotives. Inspired by a coal store that was used at the Dinorwic Slate Quarry, this Scenecraft model depicts a small slate built building with green highlights. It may be used in combination with the Slate Built Engine Shed (47-0101) and Slate Built Water Tower (47-0102) to depict a full Dinorwic shed scene. Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - NG 7 Scale (O-16.5)

Bachmann Dinorwic Coal Wagon Grey [With Load] - (NG7)

Dinorwic Coal Wagon Grey [With Load] Features: Pristine Grey livery Supplied with Coal Load NEM Coupling Pockets Supplied with ‘Hook and Loop’ Couplings and Chopper Couplings Length 43mm - Era 2 - NG7 Scale (O-16.5)

Bachmann Dinorwic Coal Wagon Grey [With Load] - (NG7)

Dinorwic Coal Wagon Grey [With Load] Features: Pristine Grey livery Supplied with Coal Load NEM Coupling Pockets Supplied with ‘Hook and Loop’ Couplings and Chopper Couplings Length 43mm - Era 2 - NG7 Scale (O-16.5)

Bachmann Dinorwic Slate Wagon without sides Grey - (NG7)

Dinorwic Slate Wagon without sides Grey Features: Pristine Grey livery NEM Coupling Pockets Supplied with ‘Hook and Loop’ Couplings and Chopper Couplings Length 43mm - Era 2 - NG7 Scale (O-16.5)

Peco O-16.5 Turnout, Medium Radius, Left Hand

16.5mm gauge track in 7mm scale gives an equivalent prototype of 2ft 4 ins, making it a popular choice for modellers, this scale is also known as 0n30 in the USA because this results in a prototype gauge close to 30ins. many modellers find that this scale/gauge allows an ideal combination of scale detail in a relatively small space. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21. - Length: 201mm - Frog Angle: 12 Degrees - Radius: 610mm - Code 100 - O-16.5 Scale

Peco O-16.5 Turnout, Medium Radius, Right Hand

16.5mm gauge track in 7mm scale gives an equivalent prototype of 2ft 4 ins, making it a popular choice for modellers, this scale is also known as 0n30 in the USA because this results in a prototype gauge close to 30ins. many modellers find that this scale/gauge allows an ideal combination of scale detail in a relatively small space. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21. - Length: 201mm - Frog Angle: 12 Degrees - Radius: 610mm - Code 100 - O-16.5 Scale

Peco O-16.5 Y Turnout, Medium Radius

16.5mm gauge track in 7mm scale gives an equivalent prototype of 2ft 4 ins, making it a popular choice for modellers, this scale is also known as 0n30 in the USA because this results in a prototype gauge close to 30ins. many modellers find that this scale/gauge allows an ideal combination of scale detail in a relatively small space. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21. - Length: 197mm - Frog Angle: 22 Degrees - Radius: 914mm - Code 100 - O-16.5 Scale

Peco O-16.5 Flexible Track, Wooden Sleeper (914mm)

16.5mm gauge track in 7mm scale gives an equivalent prototype of 2ft 4 ins, making it a popular choice for modellers, this scale is also known as 0n30 in the USA because this results in a prototype gauge close to 30ins. many modellers find that this scale/gauge allows an ideal combination of scale detail in a relatively small space. - Length: 914mm - Code 100 - O-16.5 Scale

Peco 1ton Slate Wagon Kit (O-16.5)

1ton Slate Wagon White Metal Kit of typical vehicle based on the Welsh narrow gauge stock from the heyday of the slate traffic era. (Couplings, paint and transfers not included). - White Metal Kit - O-16.5 Scale

Peco 2ton Bolster Wagon Kit (O-16.5)

2ton Bolster Wagon White Metal Kit of typical vehicle based on the Welsh narrow gauge stock from the heyday of the slate traffic era. (Couplings, paint and transfers not included). - White Metal Kit - O-16.5 Scale

Peco 4ton Mineral Wagon Kit (O-16.5)

4ton Mineral Wagon  White Metal Kit of typical vehicle based on the Welsh narrow gauge stock from the heyday of the slate traffic era. (Couplings, paint and transfers not included). - White Metal Kit - O-16.5 Scale

Peco Side Tip Wagon Kit (O-16.5)

Side Tip Wagon  White Metal Kit of typical vehicle based on the Welsh narrow gauge stock from the heyday of the slate traffic era. (Couplings, paint and transfers not included). - White Metal Kit - O-16.5 Scale

Peco Power Feed Joiners For C100 - C124 Rail (4 pairs)

Power Feeds - Designed for Code 100 OO Gauge track including (Setrack and Code 124 O Gauge Tracks) - 4 Pairs included

Peco Rail Joiners, Nickel Silver (24) (Code 100)

Designed to be used with our 00/H0 Code 100 track systems (Ref nos. SL100 and 102); also with 0 Gauge Bullhead (SL700BH) and 0-16.5/0n30 (SL500) track systems. - Compatible with Hornby and Peco Setrack & Streamline Code 100 - 24 per pack - Nickel Silver - For use with Code 100 Track

Peco Track & Turnout Fixing Pins

Pins for fixing track and turnouts - Chemically Blackened Mild Steel. - Length: 14mm - Can be used with all PECO Flexible Track Systems

Peco Insulated Rail Joiners (Code 100)

Designed to be used with our 00/H0 Code 100 track systems (Ref nos. SL100 and 102); also with 0 Gauge Bullhead (SL700BH) and 0-16.5/0n30 (SL500) track systems. Design prevents adjacent rails from touching whilst holding them in alignment. Insulated rail joiners are required to provide electrical breaks where Electrofrog turnouts are used, for more details see our Wiring the Layout publications Nos 4 and 21. - Plastic - For use with Code 100 Track