Hornby Railroad: BR Class 37 37422 'Pegasus' Swietelsky (Sound Fitted)

Railroad: BR Class 37 37422 'Pegasus' Swietelsky Rail Services (Sound Fitted)  Originally new from Vulcan Foundry in February 1965 as D6966, the locomotive this RailRoad model is based on became 37266 under the TOPS numbering system in 1974.  Its career started at Tinsley, Sheffield and it also had postings at Stratford and Landore under BR. In January 1986 it was reclassified to 37/4 and renumbered 37422. The locomotive has worn several liveries and had several different operators, including EWS, DB Schenker, and DRS. It became part of the Harry Needle Railroad Company spot hire fleet based at Barrow Hill, which was taken over by Swietelsky, an Austrian-based railway construction and maintenance contractor, in January 2025. The locomotive was named ‘Pegasus’ later the same year.  This OO gauge locomotive version is pre-fitted with a sound chip for the most authentic model railway experience. - DCC HM7000 TXS Sound Fitted - OO Scale

EFE Rail Class 314 3-Car EMU 314211 BR Blue & Grey 'Trans-Clyde'

Class 314 3-Car EMU 314211 BR Blue & Grey 'Trans-Clyde' Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Blue & Grey ‘Trans-Clyde’ livery Running No. 314211 Three-car unit comprising car Nos. 64603, 71460 & 64604 Destination boards displaying ‘Dumbarton Central via Singer, Glasgow Central and Blantyre’ and ‘Larhall via Singer, Glasgow Central and Blantyre’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

Bachmann Class 13 D4502 BR Green (Wasp Stripes) DCC Sound Fitted

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied

Bachmann Class 13 D4502 BR Green (Wasp Stripes) Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied

Bachmann Class 13 13003 BR Blue - DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 13003 BR Blue - Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 D4502 BR Green (Wasp Stripes)

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only

Hornby BR Class 153 153360 Serco Northern Rail

BR Class 153 153360 Serco Northern Rail The Hornby Class 153 No. 153360 is finished in the distinctive Northern Rail livery, representing its appearance during regular service in the north of England. It is DCC ready with a 21-pin decoder socket for easy digital upgrade and fitted with NEM couplings. History: The Northern Rail franchise commenced in December 2004 and inherited its fleet from those of Arriva Trains Northern and First North Western, including a large number of Class 153 single units, of which No. 153360 was one.  Under Northern Rail, the unit saw considerable use in the Carlisle area, including services on the Settle and Carlisle line and the Cumbria coastal line to Barrow-in-Furness.  Arriva Rail North, Northern Rail’s successor from 2016, operated the largest fleet of Class 153 units in the UK. No. 153360 went into storage in late 2021 and was subsequently scrapped. - OO Scale

Hornby RailRoad Plus: Class 66 66711 Aggregates 'Sence' (Sound Fitted)

RailRoad Plus: Class 66 66711 Aggregates 'Sence' (Sound Fitted) This RailRoad Class 66 diesel was built for freight trains and operates across the UK making it the perfect locomotive for your model freight train. It is compatible with many wagons from Hornby. It comes DCC-ready with a 21-pin plug, meaning it can be upgraded to run on DCC or with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive. This GBRf-owned locomotive is finished in the attractive turquoise, blue and silver colours of Aggregate Industries, at whose quarry at Bardon Hill it was named ‘Sence’ in July 2015. The name refers to the River Sence which has its source just north of the quarry. - DCC Sound Fitted (HM7000 Decoder) - OO Scale

Hornby RailRoad Plus: Class 66 66711 Aggregates Industries 'Sence'

RailRoad Plus: Class 66 66711 Aggregates Industries 'Sence' This RailRoad Class 66 diesel was built for freight trains and operates across the UK making it the perfect locomotive for your model freight train. It is compatible with many wagons from Hornby. It comes DCC-ready with a 21-pin plug, meaning it can be upgraded to run on DCC or with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive. This GBRf-owned locomotive is finished in the attractive turquoise, blue and silver colours of Aggregate Industries, at whose quarry at Bardon Hill it was named ‘Sence’ in July 2015. The name refers to the River Sence which has its source just north of the quarry. - DCC Ready 21-Pin Socket - OO Scale

Hornby One:One Collection, Class 60 GWR 60081 'Isambard Kingdom Brunel'

One:One Collection, Class 60 GWR 60081 'Isambard Kingdom Brunel' Includes: - Detailed bodywork and cabs - Etch nameplates - Working directional lighting - Accessory bag includes buffer beam parts - Sprung metal buffers - DCC Ready 21-Pin Decoder Socket - Exclusive packaging as part of the One:One Collection - OO Scale

Hornby Class 153 FGW No.153361 - Era 10

Class 153 FGW No.153361 Includes: - Detailed body and chassis - Interior detail - Interior lighting - DCC Ready 21 Pin Decoder Socket - Era 10 - OO scale

EFE Rail SR Bulleid Booster 20001 BR Green

SR Bulleid Booster 20001 BR Green Features: Pristine BR Green livery Running No. 20001 Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 235mm (over couplings) Five pole, skew wound, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic ‘Bulleid’ profile and detailing Bogie-mounted coupling pockets to NEM362 standards at each end Designed to operate on curves of second radius (438mm) or greater Metal Pantograph, sprung for posing in the up or down position Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, handrails, roof vents and whistles Sprung buffers Cab interior detailing including seats, power handle, brake wheel and dials Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker installed in all models for optimum sound reproduction DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Standard Cab Windows Vertical Handrail alongside the Left Hand Cab Window Two Windscreen Wipers Twin Whistles Route Indicator Discs Single-tread Steps between Bogies Original Axle Boxes Two Sandboxes per Bogie Square Shoe Beam Flash Guards Standpipe Vacuum Pipes Conceived in the late-1930s to take advantage of the Southern’s expansive electrified network, two of these Co-Co locomotives were built, gaining the nickname the ‘Boosters’ due to their motor-generator-flywheel drive arrangement employed to overcome ‘gapping’, when the locomotive could momentarily loose its electrical supply when travelling over gaps in the conductor rail. Produced especially for the EFE Rail range, this all-new model features a wealth of detail with a varied tooling suite allowing the first two locomotives, CC1 and CC2, to be modelled accurately at various points in their careers. Driven by a 5 pole, skew wound motor with flywheel, each of the six axles are driven whilst all twelve wheels provide electrical pickup. Directional lighting will operate in the forwards direction (the real locomotives were not fitted with tail lights), whilst cab lighting can be operated using a magnetic wand when used on analogue control, or when a 21 Pin DCC decoder is fitted, via two DCC functions. A speaker is pre-fitted to every model, allowing a sound decoder to be fitted to bring another dimension to your model in an instant. - Era 5 - OO Scale

Accurascale Class 66 66414 Freightliner Powerhaul

Class 66 66414 Freightliner Powerhaul 66414 was originally leased to DRS and this is how it arrived fresh from the factory aboard MV fairlift on the 16th October 2006. When that lease expired, DRS did not renew leaving the locomotive available for transfer to Freightliner. Perhaps better known for its spell as “James the Engine” in Stobart livery, it gained the new “powerhaul” version of freightliner livery in 2015 and this is how it remains to this day. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66414 Freightliner Powerhaul - DCC Sound

Class 66 66414 Freightliner Powerhaul - DCC Sound 66414 was originally leased to DRS and this is how it arrived fresh from the factory aboard MV fairlift on the 16th October 2006. When that lease expired, DRS did not renew leaving the locomotive available for transfer to Freightliner. Perhaps better known for its spell as “James the Engine” in Stobart livery, it gained the new “powerhaul” version of freightliner livery in 2015 and this is how it remains to this day. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Bachmann Class 121 Single-Car DMU 55022 BR NSE (Original)

Class 121 Single-Car DMU 55022 BR Network SouthEast (Original) 55022 Detail Variations Specific To This Model: Unit is Preserved Pristine BR Network SouthEast (Original) Livery Running No. 55022 Destination Blinds for Ealing Broadway and Greenford Original Cab Fronts with Marker/Tail Lights Plated Headcode Boxes Shortened Cab Handrails Round Buffers Exhausts with Small Silencers Leyland 680 L Engine Bodyside Heater Louvres Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 278mm Three pole motor and flywheel providing drive to the bogie at the guard’s compartment end Two axle drive Separate metal bearings fitted to each driven axle Trailing axles run in metal pinpoint bearings Electrical pickup from all wheels Diecast metal, multi-stage gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Designed to operate on curves of second radius (438mm) or greater Separately applied detail parts, including metal lamp irons and cab end handrails, exhaust pipes and windscreen wipers Bogies constructed from multiple components featuring brake and suspension detail and steps where prototypically appropriate Speedometer with flexible connection between bogie and solebar A wealth of separately fitted underframe components including engines, exhaust systems, electrical gear and auxiliary equipment Interior detailing including seating, partitions and driver’s chair and control desk in each cab Sprung metal buffers Each model is supplied with a full set of decorated bufferbeam pipework and accessory parts Directional lighting, including illuminated headcode panels* and high intensity headlights*, switchable on/off independently at either end via the chassis-mounted switches or via dedicated DCC functions (*where applicable to the prototype being modelled) Separately illuminated destination panels, switchable on/off independently at either end via the chassis-mounted switches or via dedicated DCC functions Passenger saloon lighting – switchable on/off via the chassis-mounted switches or via a dedicated DCC function Cab interior lighting – switchable on/off via the chassis-mounted switches or via a dedicated DCC function Authentic light colours and temperatures selected for each lighting application A quality speaker employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTEDversions Sound files produced specifically for the Bachmann Branchline Class 121 DMU using recordings from real units The Class 121 single-car Diesel Multiple Unit (DMU) is Bachmann Branchline’s flagship First Generation multiple unit, equalled only by its 3-car Class 117 stablemate. Employing cutting edge technology, these high fidelity models boast a wealth of detail and era-specific options to depict specific railcars at various points during their working careers which, for some, extended towards 60 years in service. Returning to the Branchline range in a selection of new liveries, these iconic suburban DMUs will make a fine addition to any model railway set in the steam-diesel transition period onwards. Capturing the look and character of the prototype, this Class 121 is adorned with many separate detail components whilst underneath the engine, drive gear and auxiliary equipment is all depicted faithfully. It may be hard to believe, but within these components and integrated into the underframe is hidden the drive mechanism, which is totally invisible with no intrusion into the interior of the model. Talking of the interior and the fine detail extends inside the model too, complete with prototypical decoration. The livery application is executed to a high standard both inside and out, using accurate colours and authentic fonts, typefaces and logos to stunning effect. Driven by the low profile mechanism, the technology continues with the lighting suite which includes directional lights, interior cab and passenger saloon lights, and Illuminated headcode boxes and destination blinds, all of which can be enjoyed by analogue users – controlled with the under-chassis switches – or via dedicated functions on DCC. With a Plux22 DCC decoder socket and pre-fitted speaker. - Era 8 - OO Scale

Bachmann Class 08 08761 BR Provincial

Class 08 08761 BR Provincial 08761 Details Variations Specific To This Model: Pristine BR Provincial livery Running No. 08761 Box Profile Main Frames Concealed Bodyside Door Hinges Radiator Ladders Removed Steel Cab Door OLEO Buffers Dual Brakes 2 Front Marker Lights (with rounded bottom housings) 3 Front Lamp Irons (lower middle lamp iron removed, top lamp iron of flat bar profile) 2 Rear Marker Lights (with rounded bottom housings) 3 Rear Lamp Irons (lower middle lamp iron removed) Standard Cab Panel (without Stiffening Ribs) Whistle Cab Roof Vent Equipment Boxes (RHS) with Raised Doors and Recessed Latches Air Compressor Cabinet (LHS) Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 122mm Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at both ends Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Fully operational front and rear lights with two, four or six lights dependent on the prototype being modelled Eight microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configuration of the front and rear lights when operated on DCC or Analogue control Shunting lights (one red and one white light at each end) operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Front and rear lights can be turned on/off independently via two dedicated functions on DCC, or using two easy access microswitches on Analogue control Authentic light colours and temperatures selected for each model based on era and application A quality speaker employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 08 using recordings from real locomotives The Class 08 Diesel Shunter was BR’s most numerous diesel locomotive type (totalling more than 1,000 examples alongside its Class 09 and Class 10 counterparts) and models of this icon have long been a staple of the Bachmann Branchline range. However, this brand-new 08 owes nothing to its predecessors and finally brings the story of the humble diesel shunter right up to date with this most accurate of OO scale renditions. Constructed from high fidelity mouldings, the new Branchline model employs a wealth of separately fitted details, including various metal components, and offers countless combinations of details and variations to allow individual locomotives to be modelled accurately at a chosen time in history. This external beauty is brought to life by the exquisite livery application which uses true-to-prototype colours, fonts and logos – extending beyond the exterior to the cab interior which itself is highly detailed and decorated accordingly. Meanwhile, ‘under the bonnet’ the model boasts a high specification that utilises the latest advancements in model railway technology. For the first time a full suite of lighting, including up to 13 separate lights, is fitted and can be enjoyed by both analogue and DCC users – whilst the new shunter is the first model to employ Bachmann’s Bach-Up stay alive system, providing DCC users with a reserve power supply for uninterrupted running even on dirty or uneven track. - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31407 - Mainline Freight

Class 31/4 Refurbished 31407 - Mainline Freight The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine Mainline Freight Blue livery Running No. 31407 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31149 BR Railfreight (RS) - Sound Fitted

Class 31/1 Refurbished 31149 BR Railfreight (Red Stripe) - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight (Red Stripe) livery Running No. 31149 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31180 BR Railfreight (RS) - Sound Fitted

Class 31/1 Refurbished 31180 BR Railfreight (Red Stripe) - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight (Red Stripe) livery Running No. 31180 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31304 BR Railfreight (PS) - Sound Fitted

Class 31/1 Refurbished 31304 BR Railfreight Petroleum Sector - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight Petroleum Sector livery Running No. 31304 Etched Depot Plaque and BR Double Arrow Included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31319 BR Railfreight (PS) - Sound Fitted

Class 31/1 Refurbished 31319 BR Railfreight Petroleum Sector - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight Petroleum Sector livery Running No. 31319 Etched Depot Plaque and BR Double Arrow Included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31407 Mainline Freight - Sound Fitted

Class 31/4 Refurbished 31407 Mainline Freight - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine Mainline Freight Blue livery Running No. 31407 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31407 Mainline Freight Deluxe SoundFitted

Class 31/4 Refurbished 31407 Mainline Freight - Deluxe Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine Mainline Freight Blue livery Running No. 31407 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31435 BR Blue - Sound Fitted

Class 31/4 Refurbished 31435 BR Blue - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Blue livery Running No. 31435 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips Electric Train Heating (ETH) - Era 8 - OO Scale