Bachmann LMS 10001 BR Lined Green (Late Crest) (Sound Fitted)

LMS 10001 BR Lined Green (Late Crest) (Sound Fitted) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model pays homage to the youngest of the pair, 10001. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system and these remained a feature of both locomotives thereafter, as displayed on this model of No. 10001 which is depicted in BR Green livery and with the late crests that were applied by BR from 1956. By this time the pair had returned to the Midland Region and were employed on duties across the region. The Bachmann Branchline model of No. 10001 is a highly detailed replica of the prototype, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10000 BR Black (Early)

LMS 10000 BR Black (Early) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model tells the story of No. 10000 during its time working on the Southern Region. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system as displayed on this model of No. 10000, which is depicted in its striking black and silver livery with early emblems. The Bachmann Branchline model is a highly detailed replica of the pioneering prototype, adorned with numerous separately fitted components to accurately capture the appearance of this iconic machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodysides Steps Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10000 BR Black (Early) (Sound Fitted)

LMS 10000 BR Black (Early) (Sound Fitted) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model tells the story of No. 10000 during its time working on the Southern Region. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system as displayed on this model of No. 10000, which is depicted in its striking black and silver livery with early emblems. The Bachmann Branchline model is a highly detailed replica of the pioneering prototype, adorned with numerous separately fitted components to accurately capture the appearance of this iconic machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodysides Steps Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10001 BR Lined Green (Late Crest)

LMS 10001 BR Lined Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model pays homage to the youngest of the pair, 10001. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system and these remained a feature of both locomotives thereafter, as displayed on this model of No. 10001 which is depicted in BR Green livery and with the late crests that were applied by BR from 1956. By this time the pair had returned to the Midland Region and were employed on duties across the region. The Bachmann Branchline model of No. 10001 is a highly detailed replica of the prototype, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann Class 13 D4502 BR Green (Wasp Stripes) DCC Sound Fitted

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied

Bachmann Class 13 D4502 BR Green (Wasp Stripes) Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied

Bachmann Class 13 13003 BR Blue - DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 13003 BR Blue - Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 D4502 BR Green (Wasp Stripes)

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight (SFD)

Class 66/8 66847 'Terry Baker' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SF)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SFD)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SF)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SFD)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association'GBRf Europorte

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte

Class 66/7 66777 'Annette' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted Deluxe)

Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted)

Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight

Class 66/8 66847 'Terry Baker' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted)

Class 66/3 66304 DRS Plain Blue (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SF)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted)  The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SFD)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/5 66515 Freightliner Racing Green (Sound Fitted Deluxe)

Class 66/5 66515 Freightliner Racing Green (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Freightliner Green livery Running No. 66515 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/6 66606 Freightliner Racing Green (Sound Fitted Deluxe)

Class 66/6 66606 Freightliner Racing Green (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Freightliner Green livery Running No. 66606 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66096 EWS

Class 66/0 66096 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66096 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue

Class 66/3 66304 DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe)

Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66015 EWS

Class 66/0 66015 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66015 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black

Class 69 69013 Andy's Man Club GBRf Black Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted Deluxe)

Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted Deluxe) Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted)

Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted) Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Bachmann Class 69 69003 'The Railway Observer' GBRf (OO)

Class 69 69003 'The Railway Observer' GBRf  The real Class 69 Diesel Locomotives have been created for GBRf through the conversion of redundant Class 56s and we are delighted to present this Bachmann Branchline OO scale model of Britain’s newest mainline diesel. Produced under an exclusive agreement with GBRf, the Branchline model has been painstakingly developed hand-in-hand with the introduction of the GBRf fleet. With the Class 69s being built from donor locomotives that were first built by three different works and have themselves seen almost fifty years of use and modification, Bachmann has worked closely with GBRf to accommodate any detail differences that were present on the donors and have remained apparent on the rebuilt machines, along with any changes made to the final design of the Class 69 during the ongoing build programme. This diligent approach has resulted in a truly magnificent model which befits the Branchline name, capturing the Class 56 shape to a tee alongside the modern adornments and many changes made to the locomotives to create the 69s. The bodyshell features crisp, accurate mouldings to depict the main features along with separately fitted parts, including etched bodyside and roof fan grilles, metal windscreen wipers and separately fitted driver’s door handrails. Inside the cab there is interior detailing which will be decorated appropriately whilst machine room detailing is visible through the bodyside grilles. The underframe equipment is all present and correct, composed of many separate parts along with sandboxes and sandpipes and sprung metal buffers, but it is the bogies that really bring this model to life. It’s hard to describe these as anything but a work of art, using countless separate components to model every aspect of the bogie in full relief, from the brakes to the suspension, even down to the separately fitted bogie-body securing chains. All of this detail, both inside and out, will be brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos and with the help of GBRf official livery diagrams. Under the body, the Branchline Class 69 features our proven drive system using a 5 pole motor with twin flywheels driving all axles on each bogie. Electrical pick-up comes from all wheels whilst DCC provision comes in the form of a Plux22 interface. Directional lighting is of course provided, along with cab and machine room lighting when used on DCC. Whilst every model comes with a pre-fitted speaker, for those looking for sound then our SOUND FITTED and SOUND FITTED DELUXE variants with their Dual Fitted XL Speaker System is the obvious choice. Talking of SOUND FITTED DELUXE, opt for our top of the range model and you can enjoy the additional features of motorised radiator fans and DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine GBRf livery Running No. 69003 Named 'The Railway Observer' Etched Nameplates included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities Bogies constructed from multiple components featuring full relief detail Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker Fitted – a pre-fitted speaker is included with every model as standard - Era 9 - OO Scale

Bachmann Class 69 69005 'Eastleigh' GBRf BR Green (SF Deluxe) (OO)

Class 69 69005 'Eastleigh' GBRf BR Green (SF Deluxe) The real Class 69 Diesel Locomotives have been created for GBRf through the conversion of redundant Class 56s and we are delighted to present this Bachmann Branchline OO scale model of Britain’s newest mainline diesel. Produced under an exclusive agreement with GBRf, the Branchline model has been painstakingly developed hand-in-hand with the introduction of the GBRf fleet. With the Class 69s being built from donor locomotives that were first built by three different works and have themselves seen almost fifty years of use and modification, Bachmann has worked closely with GBRf to accommodate any detail differences that were present on the donors and have remained apparent on the rebuilt machines, along with any changes made to the final design of the Class 69 during the ongoing build programme. This diligent approach has resulted in a truly magnificent model which befits the Branchline name, capturing the Class 56 shape to a tee alongside the modern adornments and many changes made to the locomotives to create the 69s. The bodyshell features crisp, accurate mouldings to depict the main features along with separately fitted parts, including etched bodyside and roof fan grilles, metal windscreen wipers and separately fitted driver’s door handrails. Inside the cab there is interior detailing which will be decorated appropriately whilst machine room detailing is visible through the bodyside grilles. The underframe equipment is all present and correct, composed of many separate parts along with sandboxes and sandpipes and sprung metal buffers, but it is the bogies that really bring this model to life. It’s hard to describe these as anything but a work of art, using countless separate components to model every aspect of the bogie in full relief, from the brakes to the suspension, even down to the separately fitted bogie-body securing chains. All of this detail, both inside and out, will be brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos and with the help of GBRf official livery diagrams. Under the body, the Branchline Class 69 features our proven drive system using a 5 pole motor with twin flywheels driving all axles on each bogie. Electrical pick-up comes from all wheels whilst DCC provision comes in the form of a Plux22 interface. Directional lighting is of course provided, along with cab and machine room lighting when used on DCC. Whilst every model comes with a pre-fitted speaker, for those looking for sound then our SOUND FITTED and SOUND FITTED DELUXE variants with their Dual Fitted XL Speaker System is the obvious choice. Talking of SOUND FITTED DELUXE, opt for our top of the range model and you can enjoy the additional features of motorised radiator fans and DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Green (Late Crest) (GBRf) livery Running No. 69005 Named 'Eastleigh' Etched Nameplates included SOUND FITTED – Fitted with a ESU V5DCC Sound Decoder Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities Bogies constructed from multiple components featuring full relief detail Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker Fitted – a pre-fitted speaker is included with every model as standard - Era 9 - OO Scale

Bachmann Class 69 69001 'Mayflower' GBRf (UK & US Flags) (OO)

Class 69 69001 'Mayflower' GBRf (UK & US Flags) The real Class 69 Diesel Locomotives have been created for GBRf through the conversion of redundant Class 56s and we are delighted to present this Bachmann Branchline OO scale model of Britain’s newest mainline diesel. Produced under an exclusive agreement with GBRf, the Branchline model has been painstakingly developed hand-in-hand with the introduction of the GBRf fleet. With the Class 69s being built from donor locomotives that were first built by three different works and have themselves seen almost fifty years of use and modification, Bachmann has worked closely with GBRf to accommodate any detail differences that were present on the donors and have remained apparent on the rebuilt machines, along with any changes made to the final design of the Class 69 during the ongoing build programme. This diligent approach has resulted in a truly magnificent model which befits the Branchline name, capturing the Class 56 shape to a tee alongside the modern adornments and many changes made to the locomotives to create the 69s. The bodyshell features crisp, accurate mouldings to depict the main features along with separately fitted parts, including etched bodyside and roof fan grilles, metal windscreen wipers and separately fitted driver’s door handrails. Inside the cab there is interior detailing which will be decorated appropriately whilst machine room detailing is visible through the bodyside grilles. The underframe equipment is all present and correct, composed of many separate parts along with sandboxes and sandpipes and sprung metal buffers, but it is the bogies that really bring this model to life. It’s hard to describe these as anything but a work of art, using countless separate components to model every aspect of the bogie in full relief, from the brakes to the suspension, even down to the separately fitted bogie-body securing chains. All of this detail, both inside and out, will be brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos and with the help of GBRf official livery diagrams. Under the body, the Branchline Class 69 features our proven drive system using a 5 pole motor with twin flywheels driving all axles on each bogie. Electrical pick-up comes from all wheels whilst DCC provision comes in the form of a Plux22 interface. Directional lighting is of course provided, along with cab and machine room lighting when used on DCC. Whilst every model comes with a pre-fitted speaker, for those looking for sound then our SOUND FITTED and SOUND FITTED DELUXE variants with their Dual Fitted XL Speaker System is the obvious choice. Talking of SOUND FITTED DELUXE, opt for our top of the range model and you can enjoy the additional features of motorised radiator fans and DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine GBRf (UK & US Flags) livery Running No. 69001 Named ‘Mayflower’ Etched Nameplates included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities Bogies constructed from multiple components featuring full relief detail Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker Fitted – a pre-fitted speaker is included with every model as standard - Era 9 - OO Scale

Bachmann Class 69 69002 'Bob Tiller CM&EE' GBRf BR Blue Large Logo (OO)

Class 69 69002 'Bob Tiller CM&EE' GBRf BR Blue Large Logo The real Class 69 Diesel Locomotives have been created for GBRf through the conversion of redundant Class 56s and we are delighted to present this Bachmann Branchline OO scale model of Britain’s newest mainline diesel. Produced under an exclusive agreement with GBRf, the Branchline model has been painstakingly developed hand-in-hand with the introduction of the GBRf fleet. With the Class 69s being built from donor locomotives that were first built by three different works and have themselves seen almost fifty years of use and modification, Bachmann has worked closely with GBRf to accommodate any detail differences that were present on the donors and have remained apparent on the rebuilt machines, along with any changes made to the final design of the Class 69 during the ongoing build programme. This diligent approach has resulted in a truly magnificent model which befits the Branchline name, capturing the Class 56 shape to a tee alongside the modern adornments and many changes made to the locomotives to create the 69s. The bodyshell features crisp, accurate mouldings to depict the main features along with separately fitted parts, including etched bodyside and roof fan grilles, metal windscreen wipers and separately fitted driver’s door handrails. Inside the cab there is interior detailing which will be decorated appropriately whilst machine room detailing is visible through the bodyside grilles. The underframe equipment is all present and correct, composed of many separate parts along with sandboxes and sandpipes and sprung metal buffers, but it is the bogies that really bring this model to life. It’s hard to describe these as anything but a work of art, using countless separate components to model every aspect of the bogie in full relief, from the brakes to the suspension, even down to the separately fitted bogie-body securing chains. All of this detail, both inside and out, will be brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos and with the help of GBRf official livery diagrams. Under the body, the Branchline Class 69 features our proven drive system using a 5 pole motor with twin flywheels driving all axles on each bogie. Electrical pick-up comes from all wheels whilst DCC provision comes in the form of a Plux22 interface. Directional lighting is of course provided, along with cab and machine room lighting when used on DCC. Whilst every model comes with a pre-fitted speaker, for those looking for sound then our SOUND FITTED and SOUND FITTED DELUXE variants with their Dual Fitted XL Speaker System is the obvious choice. Talking of SOUND FITTED DELUXE, opt for our top of the range model and you can enjoy the additional features of motorised radiator fans and DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Blue (Large Logo) (GBRf) livery Running No. 69002 Named 'Bob Tiller CM&EE' Etched Nameplates included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities Bogies constructed from multiple components featuring full relief detail Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker Fitted – a pre-fitted speaker is included with every model as standard - Era 9 - OO Scale

Bachmann Class 69 69002 'Bob Tiller CM&EE' GBRf LL (SF Deluxe) (OO)

Class 69 69002 'Bob Tiller CM&EE' GBRf BR Blue Large Logo (SF Deluxe) The real Class 69 Diesel Locomotives have been created for GBRf through the conversion of redundant Class 56s and we are delighted to present this Bachmann Branchline OO scale model of Britain’s newest mainline diesel. Produced under an exclusive agreement with GBRf, the Branchline model has been painstakingly developed hand-in-hand with the introduction of the GBRf fleet. With the Class 69s being built from donor locomotives that were first built by three different works and have themselves seen almost fifty years of use and modification, Bachmann has worked closely with GBRf to accommodate any detail differences that were present on the donors and have remained apparent on the rebuilt machines, along with any changes made to the final design of the Class 69 during the ongoing build programme. This diligent approach has resulted in a truly magnificent model which befits the Branchline name, capturing the Class 56 shape to a tee alongside the modern adornments and many changes made to the locomotives to create the 69s. The bodyshell features crisp, accurate mouldings to depict the main features along with separately fitted parts, including etched bodyside and roof fan grilles, metal windscreen wipers and separately fitted driver’s door handrails. Inside the cab there is interior detailing which will be decorated appropriately whilst machine room detailing is visible through the bodyside grilles. The underframe equipment is all present and correct, composed of many separate parts along with sandboxes and sandpipes and sprung metal buffers, but it is the bogies that really bring this model to life. It’s hard to describe these as anything but a work of art, using countless separate components to model every aspect of the bogie in full relief, from the brakes to the suspension, even down to the separately fitted bogie-body securing chains. All of this detail, both inside and out, will be brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos and with the help of GBRf official livery diagrams. Under the body, the Branchline Class 69 features our proven drive system using a 5 pole motor with twin flywheels driving all axles on each bogie. Electrical pick-up comes from all wheels whilst DCC provision comes in the form of a Plux22 interface. Directional lighting is of course provided, along with cab and machine room lighting when used on DCC. Whilst every model comes with a pre-fitted speaker, for those looking for sound then our SOUND FITTED and SOUND FITTED DELUXE variants with their Dual Fitted XL Speaker System is the obvious choice. Talking of SOUND FITTED DELUXE, opt for our top of the range model and you can enjoy the additional features of motorised radiator fans and DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Blue (Large Logo) (GBRf) livery Running No. 69002 Named 'Bob Tiller CM&EE' Etched Nameplates included SOUND FITTED – Fitted with a ESU V5DCC Sound Decoder Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities Bogies constructed from multiple components featuring full relief detail Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker Fitted – a pre-fitted speaker is included with every model as standard - Era 9 - OO Scale

Bachmann Class 09 09106 DB Red (Unbranded) DCC Deluxe S/F

Class 09 09106 DB Red (Unbranded) 09106 DCC Deluxe Sound Fitted Details Variations Specific To This Model: Pristine DB Red (Unbranded) livery Running No. 09106 Box Profile Main Frames Concealed Bodyside Door Hinges Radiator Ladders Removed Steel Cab Door OLEO Buffers Dual Brakes 2 Front Marker Lights (with rounded bottom housings) 2 Front Lamp Irons (middle pair removed) 2 Rear Marker Lights (with rounded bottom housings) 2 Rear Lamp Irons (middle pair removed) Standard Cab Panel (without Stiffening Ribs) Whistle Cab Roof Radio Pod Equipment Boxes (RHS) with Raised Doors and Recessed Latches External Fuel Pump Air Compressor Cabinet (LHS) Buckeye Coupler Fitted Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 122mm Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at both ends Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Fully operational front and rear lights with two, four or six lights dependent on the prototype being modelled Eight microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configuration of the front and rear lights when operated on DCC or Analogue control Shunting lights (one red and one white light at each end) operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Front and rear lights can be turned on/off independently via two dedicated functions on DCC, or using two easy access microswitches on Analogue control Authentic light colours and temperatures selected for each model based on era and application A quality speaker employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 08 using recordings from real locomotives The Class 08 Diesel Shunter was BR’s most numerous diesel locomotive type (totalling more than 1,000 examples alongside its Class 09 and Class 10 counterparts) and models of this icon have long been a staple of the Bachmann Branchline range. However, this brand-new 08 owes nothing to its predecessors and finally brings the story of the humble diesel shunter right up to date with this most accurate of OO scale renditions. Constructed from high fidelity mouldings, the new Branchline model employs a wealth of separately fitted details, including various metal components, and offers countless combinations of details and variations to allow individual locomotives to be modelled accurately at a chosen time in history. This external beauty is brought to life by the exquisite livery application which uses true-to-prototype colours, fonts and logos – extending beyond the exterior to the cab interior which itself is highly detailed and decorated accordingly. Meanwhile, ‘under the bonnet’ the model boasts a high specification that utilises the latest advancements in model railway technology. For the first time a full suite of lighting, including up to 13 separate lights, is fitted and can be enjoyed by both analogue and DCC users – whilst the new shunter is the first model to employ Bachmann’s Bach-Up stay alive system, providing DCC users with a reserve power supply for uninterrupted running even on dirty or uneven track. - Era 7 - OO Scale

Bachmann Class 08 08761 BR Provincial

Class 08 08761 BR Provincial 08761 Details Variations Specific To This Model: Pristine BR Provincial livery Running No. 08761 Box Profile Main Frames Concealed Bodyside Door Hinges Radiator Ladders Removed Steel Cab Door OLEO Buffers Dual Brakes 2 Front Marker Lights (with rounded bottom housings) 3 Front Lamp Irons (lower middle lamp iron removed, top lamp iron of flat bar profile) 2 Rear Marker Lights (with rounded bottom housings) 3 Rear Lamp Irons (lower middle lamp iron removed) Standard Cab Panel (without Stiffening Ribs) Whistle Cab Roof Vent Equipment Boxes (RHS) with Raised Doors and Recessed Latches Air Compressor Cabinet (LHS) Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 122mm Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at both ends Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Fully operational front and rear lights with two, four or six lights dependent on the prototype being modelled Eight microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configuration of the front and rear lights when operated on DCC or Analogue control Shunting lights (one red and one white light at each end) operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Front and rear lights can be turned on/off independently via two dedicated functions on DCC, or using two easy access microswitches on Analogue control Authentic light colours and temperatures selected for each model based on era and application A quality speaker employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 08 using recordings from real locomotives The Class 08 Diesel Shunter was BR’s most numerous diesel locomotive type (totalling more than 1,000 examples alongside its Class 09 and Class 10 counterparts) and models of this icon have long been a staple of the Bachmann Branchline range. However, this brand-new 08 owes nothing to its predecessors and finally brings the story of the humble diesel shunter right up to date with this most accurate of OO scale renditions. Constructed from high fidelity mouldings, the new Branchline model employs a wealth of separately fitted details, including various metal components, and offers countless combinations of details and variations to allow individual locomotives to be modelled accurately at a chosen time in history. This external beauty is brought to life by the exquisite livery application which uses true-to-prototype colours, fonts and logos – extending beyond the exterior to the cab interior which itself is highly detailed and decorated accordingly. Meanwhile, ‘under the bonnet’ the model boasts a high specification that utilises the latest advancements in model railway technology. For the first time a full suite of lighting, including up to 13 separate lights, is fitted and can be enjoyed by both analogue and DCC users – whilst the new shunter is the first model to employ Bachmann’s Bach-Up stay alive system, providing DCC users with a reserve power supply for uninterrupted running even on dirty or uneven track. - Era 8 - OO Scale

Bachmann Class 08 08928 BR Railfreight (Red Stripe)

Class 08 08928 BR Railfreight (Red Stripe) 08928 Details Variations Specific To This Model: Pristine BR Railfreight (Red Stripe) livery Running No. 08928 Box Profile Main Frames Concealed Bodyside Door Hinges Radiator Ladders Removed Steel Cab Door LMS Pattern Buffers Dual Brakes 2 Front Marker Lights (with rounded bottom housings) 2 Front Lamp Irons (middle pair removed) 2 Rear Marker Lights (with rounded bottom housings) 2 Rear Lamp Irons (middle pair removed) Standard Cab Panel (without Stiffening Ribs) Whistle Cab Roof Vent Equipment Boxes (RHS) with Raised Doors and Recessed Latches External Fuel Pump Air Compressor Cabinet (LHS) Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 122mm Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at both ends Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Fully operational front and rear lights with two, four or six lights dependent on the prototype being modelled Eight microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configuration of the front and rear lights when operated on DCC or Analogue control Shunting lights (one red and one white light at each end) operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Front and rear lights can be turned on/off independently via two dedicated functions on DCC, or using two easy access microswitches on Analogue control Authentic light colours and temperatures selected for each model based on era and application A quality speaker employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 08 using recordings from real locomotives The Class 08 Diesel Shunter was BR’s most numerous diesel locomotive type (totalling more than 1,000 examples alongside its Class 09 and Class 10 counterparts) and models of this icon have long been a staple of the Bachmann Branchline range. However, this brand-new 08 owes nothing to its predecessors and finally brings the story of the humble diesel shunter right up to date with this most accurate of OO scale renditions. Constructed from high fidelity mouldings, the new Branchline model employs a wealth of separately fitted details, including various metal components, and offers countless combinations of details and variations to allow individual locomotives to be modelled accurately at a chosen time in history. This external beauty is brought to life by the exquisite livery application which uses true-to-prototype colours, fonts and logos – extending beyond the exterior to the cab interior which itself is highly detailed and decorated accordingly. Meanwhile, ‘under the bonnet’ the model boasts a high specification that utilises the latest advancements in model railway technology. For the first time a full suite of lighting, including up to 13 separate lights, is fitted and can be enjoyed by both analogue and DCC users – whilst the new shunter is the first model to employ Bachmann’s Bach-Up stay alive system, providing DCC users with a reserve power supply for uninterrupted running even on dirty or uneven track. - Era 8 - OO Scale

Bachmann Class 46 Centre Headcode D138 BR Green (SYP)

Class 46 Centre Headcode D138 BR Green (Small Yellow Panels) The Bachmann Branchline model combines a finely-proportioned bodyshell with extensive detailing throughout, including separately fitted cab handrails, windscreen wipers, lamp brackets and sandpipes. With a powerful 5-pole motor fitted with twin flywheels which drives both bogies, these models have plenty of pulling power to haul even the longest trains. With a 21 Pin DCC decoder interface, it’s easy to add a decoder or sound decoder and speaker for use on DCC Features: Pristine BR Green (Small Yellow Panels) livery Running No. D138 Centre Headcode Panels displaying headcodes 1M67 and 1N37 NEM Coupling Pockets Sprung Buffers Powerful 5 Pole Motor with Twin Flywheels Detailed Cab Interior with pre-fitted Driver in one cab Directional Lighting Locomotive Ready to Accept a Speaker Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – recommended Decoder item No. 36-557A Length 275mm - Era 5 - OO Scale