Hornby BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack

BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack The Class 43 HST Power Cars have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce this special commemorative train pack in OO Gauge, depicting 43128 and 43135 in ScotRail ‘InterCity 7’ livery, which are still in service as part of the last HST fleet in passenger operation in the UK. Based on the refreshed tooling suite and featuring working directional and cab lights, working roof fans, 5-pole motor with twin flywheels in the motorised car, die-cast chassis and numerous separately fitted parts, this train pack is a must-have for collectors and fans of this classic British design. Features: Twin pack of highly detailed Class 43 models Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab handrails, underframe equipment and roof exhaust shroud Detailed cab interior 5-pole motor with twin flywheels in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Working directional and cab headlights Working roof fans DCC Ready with 21-Pin decoder socket in motorised/dummy cars compatible with HM7000 system Space for HM7000-21TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Some light functions will only operate to their fullest capability on DCC - OO Scale 

Hornby LNER Azuma Class 801/2 801207 'Darlington' Train Pack (Rail200)

LNER Azuma Class 801/2 801207 'Darlington' Train Pack (Rail200) The ‘Azuma’ Class 801/1 and 801/2 sets, were introduced on the East Coast Main Line between 2017 and 2020. They are a development of the Class 800 bi-mode trains in the Hitachi AT300 product range, produced at their Newton Aycliffe facility in the north-east, but unlike their bi-mode counterparts, the Class 801s are the purely electric version of the ‘Azuma’, although they are fitted with ‘emergency’ diesel engines to allow them to limp home in case of overhead power failure.  The Class 801/2s are the full nine-car length trains, whereas the 801/1s operate as shorter five-car sets, often used in pairs. The first of the full-length Class 801/2s ran in November 2019, entering service on front-line London King’s Cross-Edinburgh trains, allowing the bi-mode Class 800/1s to be cascaded onto King’s Cross-Aberdeen services, which in turn replaced the remaining InterCity 125 sets on that route. There are currently 30 Class 801/2 sets in operation. Five of which are named, including Set No. 801207, which on 14 January was unveiled by LNER to mark the 200th Anniversary year of the opening of the Stockton & Darlington Railway.  The power cars carry LNER, ‘Azuma’ and ‘Railway 200’ markings, with the legend ‘Darlington’ towards their front ends. The five-car pack includes powered PDTRBF (Pantograph Driving Trailer Restaurant Buffet First) and non-powered PDTS (Pantograph Driving Trailer Standard) cars, plus three matching coaches; two MS (Motor Standard) cars and a MF (Motor First) car. These can be made up to a full nine-car set by the addition of Coach Pack R40493. - 21 Pin DCC Decoder Socket - OO Scale

Accurascale Class 66 66789 'British Rail 1948 - 1997' GBRF BR Large Logo

Class 66 66789 'British Rail 1948 - 1997' GBRF BR Large Logo Arriving in the uk aboard MV Fairload on the 23rd June 2000, this locomotive was originally numbered 66250 and was the last EWS class 66 as part of their “red revolution” which had started with 66001 just a few years earlier. As part of a restructuring, EWS offered several locomotives for sale and 66250 was quired by GBRF in 2017 and was allocated the new number 66789. Unveiled on the 27th Feb 2018, 66789 sports a homage to the British Rail large logo blue livery to commemorate the 70th anniversary of the formation of British Railways back in 1948. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66849 'Wylam Dilly' Colas

Class 66 66849 'Wylam Dilly' Colas 66849 Started life as a Freightliner Machine numbered: 66576 and was originally named: 'Hamburg Sud Advantage', it was taken off lease from freightliner in 2011 and was taken by Colas quickly afterwards and was named 'Wylam Dilly' and is still to this day. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66724 'Drax Power Station' GBRF

Class 66 66724 'Drax Power Station' GBRF  Another locomotive that was transported on the MV Fairload was GBRF’s 66724. Arriving on the 20th December 2006, this locomotive originally sported the “First group” rendition of GBRF livery ahead of the press launch on the 8th January 2007 at Old Oak Common. 66724 gained its nameplates “Drax Power Station” later the same year. Surviving in much the same condition for a decade, 66724 was given a fresh coat of GBRF’s now standard dark blue in 2017. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66142 'Maritime Intermodal Three' DB Maritime Blue

Class 66 66142 'Maritime Intermodal Three' DB Maritime Blue Once an anonymous EWS maroon and gold class 66, 66142 led the life of a typical EWS 66 from its delivery during August 1999 right through the acquisition by DB up until its turn in the paintshop came in 2019 at the ripe age of 20 years old! Rather than the bright red of DB, 66142 gained the vibrant blue colour of Maritime Intermodal and was named “Maritime Intermodal Three”. Following Accurascale handing out free 'a' stickers at Warley in 2022, a number of these have found their way in to a wide variety of places, including on real rolling stock. 66142 is one such locomotive and proudly wears its 'a' sticker under one set of numbers Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66302 Fastline

Class 66 66302 Fastline 66302 arrived in the uk as part of a “mixed delivery” of class 66 low emission models, alongside locos for Freightliner and DRS aboard the MV Stellanova on the 8th November 2006. Following unloading and acceptance it worked its first train of HYA’s on the 13th November. When Jarvis went in to administration, Fastline’s small fleet of class 66 locomotives were acquired by DRS before being repainted into their house colours Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66414 Freightliner Powerhaul

Class 66 66414 Freightliner Powerhaul 66414 was originally leased to DRS and this is how it arrived fresh from the factory aboard MV fairlift on the 16th October 2006. When that lease expired, DRS did not renew leaving the locomotive available for transfer to Freightliner. Perhaps better known for its spell as “James the Engine” in Stobart livery, it gained the new “powerhaul” version of freightliner livery in 2015 and this is how it remains to this day. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66421 'Gresty Bridge TMD' DRS

Class 66 66421 'Gresty Bridge TMD' DRS One engine that hasn’t changed operators was DRS owned 66421. This particular locomotive was delivered on the 9th September 2007. Originally carrying the DRS compass livery, the locomotive was soon put to work on a variety of the companies trains.66421 was refreshed with the new simplified DRS livery during 2015 and ran unnamed until 2018 when it featured at the DRS Crewe Gresty Bridge TMD open day where it was named after the depot. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale