Accurascale BR Mk2C FK M13520 Blue/Grey InterCity (OO)

BR Mk2C FK M13520 Blue/Grey InterCity (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO M5561 Blue/Grey InterCity (OO)

BR Mk2C TSO M5561 Blue/Grey InterCity (OO)Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO)

BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSO 9440 South Wales & West Blue (OO)

BR Mk2C BSO 9440 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5453 South Wales & West Blue (OO)

BR Mk2B TSO 5453 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5491 South Wales & West Blue (OO)

BR Mk2B TSO 5491 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Hornby LB&SCR 6 Wheel First Class Coach 452

LB&SCR 6 Wheel First Class Coach 452 This charming LB&SCR 6-Wheel 1st Class Coach No. 452 looks incredible in its London Brighton & South Coast Railway Lined brown livery. The distinctive 6-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s.  Perfect for pairing with the delightful A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 6-wheel 1st Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory pack Livery: LBSCR Lined Brown Gold lettering Painted blue seating - OO Scale  

Hornby BR Mk1 TSO 4914 Network South East

BR Mk1 TSO 4914 Network South East The British Railways Mark 1 coach family includes some of the most successful designs in railway history, with thousands constructed and lasting from the early 50’s right up until the present day. In the blue, white and red livery of NSE, this Tourist Second Open No. 4914 is the perfect accompaniment for 1980s and 1990s British diesel locomotives! Model Specification: Highly detailed model of Mk1 Tourist Second Open Defined bogie mouldings Detailed roof and underframe Moulded and painted interior Kinematic NEM coupling mechanism Accessory pack Livery: Network Southeast Crisp paint application using accurate colours and fonts - OO Scale

Hornby BR Mk1 BSK 35010 Network South East

BR Mk1 BSK 35010 Network South East The British Railways Mark 1 coach family includes some of the most successful designs in railway history, with thousands constructed and lasting from the early 50’s right up until the present day. In the blue, white and red livery of NSE, this Brake Second Corridor No. 35010 is the perfect accompaniment for 1980s and 1990s British diesel locomotives! Model Specification: Highly detailed model of Mk1 Brake Standard Corridor Defined bogie mouldings Detailed roof and underframe Moulded and painted interior Kinematic NEM coupling mechanism Accessory pack Livery: Network Southeast Crisp paint application using accurate colours and fonts - OO Scale

Rapido UK Not Quite Mink’ Blue Circle Portland Cement Yellow No.177

Not Quite Mink’ Blue Circle Portland Cement Yellow No.177 Not-quite-mink Blue Circle Yellow No. 177 Oil axleboxes Short end vents Double-sided brakes, 4 brake shoes Mink doors Spoked wheels running in metal bearings NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Bachmann PCA Wagon BCC11026 'Blue Circle Cement' Grey [W]

PCA Metalair Bulk Powder Wagon 'Blue Circle Cement' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Blue Circle Cement’ Grey livery Running No. BCC11026 Accessory Pack NEM Coupling Pockets Length 115mm (over couplings)

Bachmann PCA Wagon BCC11050 'Freightliner Heavy Haul' Grey [W]

PCA Metalair Bulk Powder Wagon 'Freightliner Heavy Haul' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Freightliner Heavy Haul’ Grey livery Running No. BCC11050 Accessory Pack NEM Coupling Pockets

Bachmann PCA Wagon BCC11089 'Freightliner Heavy Haul' Grey [W]

PCA Wagon BCC11089 'Freightliner Heavy Haul' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Freightliner Heavy Haul’ Grey livery Running No. BCC11089 Accessory Pack NEM Coupling Pockets Length 115mm (over couplings)

Rapido UK LNWR Dia17b Brake Van Police Blue No.K-9

LNWR Dia17b Brake Van Police Blue No.K-9 LNWR Dia17b Brake Van Police Blue No.K-9 Veranda Glass Fitted Veranda Door Fitted Spoked wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed

Bachmann SSA Scrap Wagon EWS 470078 [W]

SSA Scrap Wagon EWS 470078 [W] The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Weathered EWS livery Running No. 470078 Features: Length 126mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van Express Dairy Company N48359

SR 12T Even Planked Ventilated Van Express Dairy Company N48359 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine Express Dairy Company Blue livery Running No. N48359 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5010

POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5010 The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Pristine Standard Railfreight Blue & Yellow livery Running No. RLS5010 Features: Length 126mm (over couplings) - OO Scale

Bachmann POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5952 [W]

POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5952 [W] The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Weathered Standard Railfreight Blue & Yellow livery Running No. RLS5952 Features: Length 126mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Composite S&DJR Lined Blue

54ft non-Corridor Composite S&DJR Lined Blue The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine S&DJR Lined Blue livery Running No. 55 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Third S&DJR Lined Blue

54ft non-Corridor Third S&DJR Lined Blue The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine S&DJR Lined Blue livery Running No. 42 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale  

EFE Rail 54ft non-Corridor Brake Third S&DJR Lined Blue

54ft non-Corridor Brake Third S&DJR Lined Blue The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine S&DJR Lined Blue livery Running No. 134 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

Hornby Railroad: TTA Tanker Esso, Mobil & Total Triple Pack

Railroad: TTA Tanker Esso, Mobil & Total Triple Pack ‘TTA’ petroleum tankers such as these were a regular sight on Britain’s railways from the 1960s, with the last withdrawn in early 2000.  This colourful OO gauge model triple back offers three of the most popular liveries to be seen during that time: Esso, with its distinctive blue oval and red lettering on a grey tank; Mobil fuel oils, with its distinctive ‘flying horse’ emblem and bright red tank; and Total, with its tri-colour stripe logo against a plain black tank.  This RailRoad triple pack is great way to expand your oil or petroleum tanker train. - OO Scale

Hornby 2026 Christmas Wagon

2026 Christmas Wagon Add a touch of holiday magic to your model railway with the Hornby 2026 Christmas Wagon. Featuring a vibrant blue livery and stacked with festive presents, this charming wagon brings seasonal cheer to any layout, or makes a delightful display under the tree. Make your collection merry this Christmas! - OO Scale

Bachmann BR FVX Carflat Wagon BR Blue 'Motorail' 'B745075'

BR FVX Carflat Wagon BR Blue 'Motorail' 'B745075' Carflat Wagons allowed cars to be transported by rail, a practice that had started during the early twentieth century, but which became more common after World War Two as more families began realising the dream of owning their own motor vehicle. Many were built from old coach underframes that had had their bodies scrapped, with the type really coming to the fore in 1966 when British Rail launched its Motorail service, providing British holidaymakers with long distance train services where they could take their car on holiday with them, giving the convenience of independent transport whilst on holiday but without the long drive to get there. This Bachmann Branchline model depicts a BR-built Carflat, which to all intents and purposes is a standard BR Mk1 coach underframe running on a pair of BR B1 bogies. The deck of the vehicle is planked, and low side railings are fitted to prevent vehicles from accidentally driving off the side. Like a Mk1 coach, the underside of the vehicle is not overly populated but still features the typical truss frame along with vacuum brake cylinders and, unlike Mk1 coaches, has hand brake levers.     Details: Pristine BR Blue ‘Motorail’ livery Running No. B745075 Features: Accessory Pack NEM Coupling Pockets Length 270mm - OO Scale

Bachmann BR 22T CPV Presflo Bulk Powder Wagon 'Blue Circle' 'B888556'

BR 22T CPV Presflo Bulk Powder Wagon 'Blue Circle' 'B888556' When British Railways was formed in 1948, it inherited thousands of wagons from the big four. Whilst many of these wagons were perfectly suited for their intended purposes, BR identified a need for a purpose-built wagon to transport powered goods, such as cement, which previously were transported in bags in vans. So, in 1954 the first ‘Presflo’ (short for pressure flow) was built, which utilised the science of air fluidisation, a process which pumps air into the powder to prevent clumping and keep it loose, allowing the powder to be drained from the wagon efficiently. The design was very successful and lasted well into the 1980’s, finding use on different traffic flows up and down the country. This particular model depicts a ‘Presflo’ in BR Bauxite livery with ‘Blue Circle Bulk Cement’ company boards. This Bachmann Branchline ‘Presflo’ tooling suite comprehensively covers the history of these wagons, allowing us to produce a variety of different Presflo types. Our model features a wealth of separately fitted parts, including an end ladder, roof catwalk, handrails and underframe equipment. The ubiquitous BR Bauxite livery is applied using accurate colours and typefaces to produce an iconic wagon fit for any OO scale model railway.     Details: Pristine BR Bauxite ‘Blue Circle Cement’ livery Running No. B888556 Features: Accessory Pack NEM Coupling Pockets Length 87mm - OO Scale

Dapol KQA/KTA Container Wagon Tiphook Blue 4907 011 7 (OO)

KQA/KTA Container Wagon Tiphook Blue 4907 011 7 During the 1990's the growing use of 9'6" tall (High Cube) containers was causing problems for freight  operators transporting them on height restricted UK railway lines using standard intermodal flat bed wagons. The Tiphook approach to solve this problem was not the conventional solution of lowering the platform and using smaller wheels, instead they designed a latticed platform that sat low down, below the top level of the bogies and a pocket was formed with the slab sides that gave the wagon strength and rigidity. In total seventy five of these wagons were built by Rautaruuki in Finland. They were delivered in two batches between 1997 and 1998 and bore a blue Tiphook livery. Features: Highly detailed body moulding  Accurately applied livery  NEM pockets and couplings fitted as standard  Previous models shown for illustration only  *Containers sold separately    - OO Scale

Dapol KQA/KTA Container Wagon Tiphook Blue 4907 033 1 (OO)

KQA/KTA Container Wagon Tiphook Blue 4907 033 1 During the 1990's the growing use of 9'6" tall (High Cube) containers was causing problems for freight  operators transporting them on height restricted UK railway lines using standard intermodal flat bed wagons. The Tiphook approach to solve this problem was not the conventional solution of lowering the platform and using smaller wheels, instead they designed a latticed platform that sat low down, below the top level of the bogies and a pocket was formed with the slab sides that gave the wagon strength and rigidity. In total seventy five of these wagons were built by Rautaruuki in Finland. They were delivered in two batches between 1997 and 1998 and bore a blue Tiphook livery. Features: Highly detailed body moulding  Accurately applied livery  NEM pockets and couplings fitted as standard  Previous models shown for illustration only  *Containers sold separately    - OO Scale

Dapol KQA/KTA Container Wagon Touax GERS 97752 (OO)

KQA/KTA Container Wagon Touax GERS 97752  During the 1990's the growing use of 9'6" tall (High Cube) containers was causing problems for freight  operators transporting them on height restricted UK railway lines using standard intermodal flat bed wagons. The Tiphook approach to solve this problem was not the conventional solution of lowering the platform and using smaller wheels, instead they designed a latticed platform that sat low down, below the top level of the bogies and a pocket was formed with the slab sides that gave the wagon strength and rigidity. In total seventy five of these wagons were built by Rautaruuki in Finland. They were delivered in two batches between 1997 and 1998 and bore a blue Tiphook livery. Features: Highly detailed body moulding  Accurately applied livery  NEM pockets and couplings fitted as standard  Previous models shown for illustration only  *Containers sold separately    - OO Scale

Dapol KQA/KTA Container Wagon Touax GERS 97763 (OO)

KQA/KTA Container Wagon Touax GERS 97763 During the 1990's the growing use of 9'6" tall (High Cube) containers was causing problems for freight  operators transporting them on height restricted UK railway lines using standard intermodal flat bed wagons. The Tiphook approach to solve this problem was not the conventional solution of lowering the platform and using smaller wheels, instead they designed a latticed platform that sat low down, below the top level of the bogies and a pocket was formed with the slab sides that gave the wagon strength and rigidity. In total seventy five of these wagons were built by Rautaruuki in Finland. They were delivered in two batches between 1997 and 1998 and bore a blue Tiphook livery. Features: Highly detailed body moulding  Accurately applied livery  NEM pockets and couplings fitted as standard  Previous models shown for illustration only  *Containers sold separately    - OO Scale

Rapido UK GER Dia.17 5-plank LNER Loco Sand Blue '600014'

GER Dia.17 5-plank LNER Loco Sand Blue '600014' Features: GER Dia.17 5-plank open wagon LNER loco sand blue No. 600014 Morton 3-shoe brakes with open ratchet (U safety loops) Monarch door mechanism Ribbed buffer housings LNER B1 axleboxes GER split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets - OO Scale

Rapido UK Ivor the Engine Rolling Stock Pack

Ivor the Engine Rolling Stock Pack Features: Passenger coach Coal hopper 1-plank wagon with crate load 2D cardboard figures and bases for Evans the Song, the Choir, Mrs Porty and Bluebell the Donkey, all produced from the original animation artwork Fold-up station building and platform Special presentation box Compatible with other OO gauge products - OO Scale

Bachmann BR Mk2F FO BR Blue & Grey (Inter-City) 'M3430' (OO)

BR Mk2F FO BR Blue & Grey (Inter-City) 'M3430' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. M3430 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F DBSO BR Blue & Grey (Inter-City) 'SC9703' (OO) (DCC)

BR Mk2F DBSO BR Blue & Grey (Inter-City) 'SC9703' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. The DBSOs were used in Scotland to work push-pull services, usually with a Class 47/7 locomotive at the other end that had been specially modified to allow push-pull operations. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F DBSO in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panel is completed with metal wire grab handles. The inner end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the inner end, including the ETH socket and cabling, along with pipework and dummy knuckle couplings. It's the cab that makes the DBSO instantly recognisable amongst the Mk2 fleet and here, every detail has been considered, from the glazed cab windows with their separate window wiper to the corridor gangway with its optional cover. Again, a full set of bufferbeam pipework and accessories is included, along with the obstacle deflector, a characteristic feature of the DBSOs when viewed front-on. The light clusters complete the front end and working lights are fitted as standard. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief along with additional details like the speedometers found on the DBSOs. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, guard’s compartment and luggage area, complete with the caging which enclosed it. The livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC four separate lighting features can be enjoyed with individual control of the interior, Guard’s compartment and cab lights, plus the directional lights which display red or white according to the direction of travel. When used on analogue control, the interior lights and directional lights will work when power is applied. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. SC9703 Directional Lighting Interior Lighting DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F BSO BR Blue & Grey (Inter-City) 'M9516' (OO)

BR Mk2F BSO BR Blue & Grey (Inter-City) 'M9516' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. M9516 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR MK1 FO BR Blue & Grey 'M3116' (OO)

BR MK1 FO First Open BR Blue & Grey 'M3116' The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey livery Running No. M3116 Commonwealth Bogies End Steps Removed Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) - Era 6 - OO Scale

Hornby RailRoad: BR, Mk3 TGS Coach 'W44008' BR Blue/Grey Inter-City

RailRoad: BR, Mk3 TGS Coach 'W44008' BR Blue/Grey Inter-City This Trailer Standard Open ‘TSO’ InterCity Mk3 coach is an ideal coach to add to the B.R. High-Speed Train Set to increase the rake of coaches between the two Class43 Diesels. Mk3 coaches entered service in 1975 along with the Class 43 forming the iconic InterCity 125 trainset. After the HST Mk3 coach variant was introduced, further Mk3 coaches were introduced to the West Coast Mainline for use as part of locomotive-hauled trains. Whilst Mk3 stock is standard for HST units, the standard locomotive hauled stock is Mk3a. Mk3a stock differs from Mk3 stock due to the inclusion of buffers and a different electrical system that uses motor generator units in each coach to power air conditioning and other ancillaries. Mk3a stock was built until 1984, before 3B stock with improved seating and lighting was built from 1985 to 1988. - OO Scale

Hornby RailRoad: BR, Mk3 TRUB Coach '40001' BR Blue/Grey Inter-City

RailRoad: BR, Mk3 TRUB Coach '40001' BR Blue/Grey Inter-City This Trailer Restaurant Un-classified Buffet ‘TRUB’ InterCity Mk3 coach is an ideal coach to add to the B.R. High-Speed Train Set to increase the rake of coaches between the two Class43 Diesels. Mk3 coaches entered service in 1975 along with the Class 43 forming the iconic InterCity 125 trainset. After the HST Mk3 coach variant was introduced, further Mk3 coaches were introduced to the West Coast Mainline for use as part of locomotive-hauled trains. Whilst Mk3 stock is standard for HST units, the standard locomotive hauled stock is Mk3a. Mk3a stock differs from Mk3 stock due to the inclusion of buffers and a different electrical system that uses motor generator units in each coach to power air conditioning and other ancillaries. Mk3a stock was built until 1984, before 3B stock with improved seating and lighting was built from 1985 to 1988. - OO Scale

Hornby RailRoad: BR, Mk3 FO Coach '41003' BR Blue/Grey Inter-City

RailRoad: BR, Mk3 FO Coach '41003' BR Blue/Grey Inter-City This First Open ‘FO’ InterCity Mk3 coach is an ideal coach to add to the B.R. High-Speed Train Set to increase the rake of coaches between the two Class43 Diesels. Mk3 coaches entered service in 1975 along with the Class 43 forming the iconic InterCity 125 trainset. After the HST Mk3 coach variant was introduced, further Mk3 coaches were introduced to the West Coast Mainline for use as part of locomotive-hauled trains. Whilst Mk3 stock is standard for HST units, the standard locomotive hauled stock is Mk3a. Mk3a stock differs from Mk3 stock due to the inclusion of buffers and a different electrical system that uses motor generator units in each coach to power air conditioning and other ancillaries. Mk3a stock was built until 1984, before 3B stock with improved seating and lighting was built from 1985 to 1988. - OO Scale

Hornby GNER, Mk3 Trailer Guard Standard (TGS), 44045 - Era 9

GNER, Mk3 Trailer Guard Standard (TGS), 44045 - Era 9 Includes: - Great North Eastern Railway GNER livery - Interior seating detail - Detailed bogies and underframe parts - NEM coupling  - Provision for lighting provided by the R7305 Maglight lighting unit NOT included - Included our the new Buckeye style magnetic couplings. - OO Scale Vehicle information: Mk3 coaches are 75ft (23m) long enabling far greater capacity than older coaches. Mk3 coaches also incorporate disk breaks and wheel slip protection enabling faster deceleration. The first Mk3 coaches to be delivered were used as part of the HST prototype along with the two Class 41 diesel power cars in 1972.  Mk3 coaches entered service in 1975 along with the Class 43 forming the iconic InterCity 125 trainset. After the HST Mk3 coach variant was introduced, further Mk3 coaches were introduced to the West Coast Mainline for use as part of locomotive hauled trains. Whilst Mk3 stock is standard for HST units, the standard locomotive hauled stock is Mk3a. Mk3a stock differs from Mk3 stock due to the inclusion of buffers as well as a different electrical system that uses motor generator units in each coach to power air conditioning and other ancillaries Mk3a stock was built until 1984, before 3B stock with improved seating and lighting was built from 1985 to 1988. The Mk3 coach is perhaps most iconic in its original production livery of the BR Grey and Blue. It is in this livery that the coach, as well as the matching Class 43 units would be introduced, before high speed rail services in the UK would be rebranded into the Intercity Executive livery.  Following the privatisation of the Railway network, Mk3 coaches would find themselves in many colourful liveries, some harking back to the original blue and grey livery of times gone by.

Hornby GNER, Mk3 Trailer Standard (TS), 42340 – Era 9

GNER, Mk3 Trailer Standard (TS), 42340 – Era 9 Includes: - Great North Eastern Railway GNER livery - Interior seating detail - Detailed bogies and underframe parts - NEM coupling  - Provision for lighting provided by the R7305 Maglight lighting unit NOT included - Included our the new Buckeye style magnetic couplings. - OO Scale Vehicle information: Mk3 coaches are 75ft (23m) long enabling far greater capacity than older coaches. Mk3 coaches also incorporate disk breaks and wheel slip protection enabling faster deceleration. The first Mk3 coaches to be delivered were used as part of the HST prototype along with the two Class 41 diesel power cars in 1972.  Mk3 coaches entered service in 1975 along with the Class 43 forming the iconic InterCity 125 trainset. After the HST Mk3 coach variant was introduced, further Mk3 coaches were introduced to the West Coast Mainline for use as part of locomotive hauled trains. Whilst Mk3 stock is standard for HST units, the standard locomotive hauled stock is Mk3a. Mk3a stock differs from Mk3 stock due to the inclusion of buffers as well as a different electrical system that uses motor generator units in each coach to power air conditioning and other ancillaries Mk3a stock was built until 1984, before 3B stock with improved seating and lighting was built from 1985 to 1988. The Mk3 coach is perhaps most iconic in its original production livery of the BR Grey and Blue. It is in this livery that the coach, as well as the matching Class 43 units would be introduced, before high speed rail services in the UK would be rebranded into the Intercity Executive livery.  Following the privatisation of the Railway network, Mk3 coaches would find themselves in many colourful liveries, some harking back to the original blue and grey livery of times gone by.

Hornby GNER, Mk3 Trailer Standard (TS), 42063 – Era 9

GNER, Mk3 Trailer Standard (TS), 42063 – Era 9 Includes: - Great North Eastern Railway GNER livery - Interior seating detail - Detailed bogies and underframe parts - NEM coupling  - Provision for lighting provided by the R7305 Maglight lighting unit NOT included - Included our the new Buckeye style magnetic couplings. - OO Scale Vehicle information: Mk3 coaches are 75ft (23m) long enabling far greater capacity than older coaches. Mk3 coaches also incorporate disk breaks and wheel slip protection enabling faster deceleration. The first Mk3 coaches to be delivered were used as part of the HST prototype along with the two Class 41 diesel power cars in 1972.  Mk3 coaches entered service in 1975 along with the Class 43 forming the iconic InterCity 125 trainset. After the HST Mk3 coach variant was introduced, further Mk3 coaches were introduced to the West Coast Mainline for use as part of locomotive hauled trains. Whilst Mk3 stock is standard for HST units, the standard locomotive hauled stock is Mk3a. Mk3a stock differs from Mk3 stock due to the inclusion of buffers as well as a different electrical system that uses motor generator units in each coach to power air conditioning and other ancillaries Mk3a stock was built until 1984, before 3B stock with improved seating and lighting was built from 1985 to 1988. The Mk3 coach is perhaps most iconic in its original production livery of the BR Grey and Blue. It is in this livery that the coach, as well as the matching Class 43 units would be introduced, before high speed rail services in the UK would be rebranded into the Intercity Executive livery.  Following the privatisation of the Railway network, Mk3 coaches would find themselves in many colourful liveries, some harking back to the original blue and grey livery of times gone by.

Hornby GNER, Mk3 Trailer Standard (TS), 42065 – Era 9

GNER, Mk3 Trailer Standard (TS), 42065 – Era 9 Includes: - Great North Eastern Railway GNER livery - Interior seating detail - Detailed bogies and underframe parts - NEM coupling  - Provision for lighting provided by the R7305 Maglight lighting unit NOT included - Included our the new Buckeye style magnetic couplings. - OO Scale Vehicle information: Mk3 coaches are 75ft (23m) long enabling far greater capacity than older coaches. Mk3 coaches also incorporate disk breaks and wheel slip protection enabling faster deceleration. The first Mk3 coaches to be delivered were used as part of the HST prototype along with the two Class 41 diesel power cars in 1972.  Mk3 coaches entered service in 1975 along with the Class 43 forming the iconic InterCity 125 trainset. After the HST Mk3 coach variant was introduced, further Mk3 coaches were introduced to the West Coast Mainline for use as part of locomotive hauled trains. Whilst Mk3 stock is standard for HST units, the standard locomotive hauled stock is Mk3a. Mk3a stock differs from Mk3 stock due to the inclusion of buffers as well as a different electrical system that uses motor generator units in each coach to power air conditioning and other ancillaries Mk3a stock was built until 1984, before 3B stock with improved seating and lighting was built from 1985 to 1988. The Mk3 coach is perhaps most iconic in its original production livery of the BR Grey and Blue. It is in this livery that the coach, as well as the matching Class 43 units would be introduced, before high speed rail services in the UK would be rebranded into the Intercity Executive livery.  Following the privatisation of the Railway network, Mk3 coaches would find themselves in many colourful liveries, some harking back to the original blue and grey livery of times gone by.

Hornby GNER, Mk3 Trailer First (TF), 41044 - Era 9

GNER, Mk3 Trailer First (TF), 41044 - Era 9 Includes: - Great North Eastern Railway GNER livery - Interior seating detail - Detailed bogies and underframe parts - NEM coupling  - Provision for lighting provided by the R7305 Maglight lighting unit NOT included - Included our the new Buckeye style magnetic couplings. - OO Scale Vehicle information: Mk3 coaches are 75ft (23m) long enabling far greater capacity than older coaches. Mk3 coaches also incorporate disk breaks and wheel slip protection enabling faster deceleration. The first Mk3 coaches to be delivered were used as part of the HST prototype along with the two Class 41 diesel power cars in 1972.  Mk3 coaches entered service in 1975 along with the Class 43 forming the iconic InterCity 125 trainset. After the HST Mk3 coach variant was introduced, further Mk3 coaches were introduced to the West Coast Mainline for use as part of locomotive hauled trains. Whilst Mk3 stock is standard for HST units, the standard locomotive hauled stock is Mk3a. Mk3a stock differs from Mk3 stock due to the inclusion of buffers as well as a different electrical system that uses motor generator units in each coach to power air conditioning and other ancillaries Mk3a stock was built until 1984, before 3B stock with improved seating and lighting was built from 1985 to 1988. The Mk3 coach is perhaps most iconic in its original production livery of the BR Grey and Blue. It is in this livery that the coach, as well as the matching Class 43 units would be introduced, before high speed rail services in the UK would be rebranded into the Intercity Executive livery.  Following the privatisation of the Railway network, Mk3 coaches would find themselves in many colourful liveries, some harking back to the original blue and grey livery of times gone by.

Hornby GNER, Mk3 Trailer First Disabled (TFD), 41043 - Era 9

GNER, Mk3 Trailer First Disabled (TFD), 41043 - Era 9 Includes: - Great North Eastern Railway GNER livery - Interior seating detail - Detailed bogies and underframe parts - NEM coupling  - Provision for lighting provided by the R7305 Maglight lighting unit NOT included - Included our the new Buckeye style magnetic couplings. - OO Scale Vehicle information: Mk3 coaches are 75ft (23m) long enabling far greater capacity than older coaches. Mk3 coaches also incorporate disk breaks and wheel slip protection enabling faster deceleration. The first Mk3 coaches to be delivered were used as part of the HST prototype along with the two Class 41 diesel power cars in 1972.  Mk3 coaches entered service in 1975 along with the Class 43 forming the iconic InterCity 125 trainset. After the HST Mk3 coach variant was introduced, further Mk3 coaches were introduced to the West Coast Mainline for use as part of locomotive hauled trains. Whilst Mk3 stock is standard for HST units, the standard locomotive hauled stock is Mk3a. Mk3a stock differs from Mk3 stock due to the inclusion of buffers as well as a different electrical system that uses motor generator units in each coach to power air conditioning and other ancillaries Mk3a stock was built until 1984, before 3B stock with improved seating and lighting was built from 1985 to 1988. The Mk3 coach is perhaps most iconic in its original production livery of the BR Grey and Blue. It is in this livery that the coach, as well as the matching Class 43 units would be introduced, before high speed rail services in the UK would be rebranded into the Intercity Executive livery.  Following the privatisation of the Railway network, Mk3 coaches would find themselves in many colourful liveries, some harking back to the original blue and grey livery of times gone by.

Hornby GNER, Mk3 Trailer Restaurant First Buffet (TRFB), 40737 - Era 9

GNER, Mk3 Trailer Restaurant First Buffet (TRFB), 40737 - Era 9  Includes: - Great North Eastern Railway GNER livery - Interior seating detail - Detailed bogies and underframe parts - NEM coupling  - Provision for lighting provided by the R7305 Maglight lighting unit NOT included - Included our the new Buckeye style magnetic couplings. - OO Scale Vehicle information: Mk3 coaches are 75ft (23m) long enabling far greater capacity than older coaches. Mk3 coaches also incorporate disk breaks and wheel slip protection enabling faster deceleration. The first Mk3 coaches to be delivered were used as part of the HST prototype along with the two Class 41 diesel power cars in 1972.  Mk3 coaches entered service in 1975 along with the Class 43 forming the iconic InterCity 125 trainset. After the HST Mk3 coach variant was introduced, further Mk3 coaches were introduced to the West Coast Mainline for use as part of locomotive hauled trains. Whilst Mk3 stock is standard for HST units, the standard locomotive hauled stock is Mk3a. Mk3a stock differs from Mk3 stock due to the inclusion of buffers as well as a different electrical system that uses motor generator units in each coach to power air conditioning and other ancillaries Mk3a stock was built until 1984, before 3B stock with improved seating and lighting was built from 1985 to 1988. The Mk3 coach is perhaps most iconic in its original production livery of the BR Grey and Blue. It is in this livery that the coach, as well as the matching Class 43 units would be introduced, before high speed rail services in the UK would be rebranded into the Intercity Executive livery.  Following the privatisation of the Railway network, Mk3 coaches would find themselves in many colourful liveries, some harking back to the original blue and grey livery of times gone by.

Bachmann LNER Thompson Full Brake BR Blue E105E

LNER Thompson Full Brake BR Blue E105E New Tooling has been developed to expand the Bachmann Branchline range of LNER Thompson Coaches with this Full Brake vehicle. Used to transport parcels and luggage, this vehicle is an ideal complement to a passenger train or could be marshalled as part of a dedicated parcels train operating across the LNER network and into bordering regions. Features: Pristine BR Blue livery Running No. E105E Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 264mm - Era 6 - OO Scale

Hornby BR, GUV, BR Blue livery - Era 5

BR, GUV, BR Blue livery A General Utility Van (GUV) is a type of rail vehicle built by British Rail primarily for transporting mail and parcels. They were used by both Rail Express Systems and Railtrack. Colas Rail and some train operating companies still use them. The Departmental Utility Van posessed the goods carrying potential vital for its task of carrying materials pertinent to the company. The BR Departmental Utility Van is a worthwhile addition to your burgeoning collection, if your interest is kindled in those rail vehicles dedicated to maintaning the processes and efficency of the railway as well as freight and customer travel. - Era 5 - OO Scale