Accurascale BR Mk2C FK M13520 Blue/Grey InterCity (OO)

BR Mk2C FK M13520 Blue/Grey InterCity (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C FK M13527 Provincial Trans-Pennine (OO)

BR Mk2C FK M13527 Provincial Trans-Pennine (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5505 Regional Railways (OO)

BR Mk2C TSO 5505 Regional Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5520 Provincial (Unbranded) (OO)

BR Mk2C TSO 5520 Provincial (Unbranded) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5525 Network SouthEast (OO)

BR Mk2C TSO 5525 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5569 Maroon (South Wales & West) (OO)

BR Mk2C TSO 5569 Maroon (South Wales & West) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO M5561 Blue/Grey InterCity (OO)

BR Mk2C TSO M5561 Blue/Grey InterCity (OO)Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) 6501 Network SouthEast (OO)

BR Mk2C TSO(T) 6501 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO)

BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C FK 13514 Network SouthEast (OO)

BR Mk2C FK 13514 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BFK 17120 Network SouthEast w/ WoE Route Branding (OO)

BR Mk2C BFK 17120 Network SouthEast w/ WoE Route Branding (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BFK IC17177C InterCity Executive (OO)

BR Mk2C BFK IC17177C InterCity Executive (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSK (exBFK) 35506 Regional Railways (OO)

BR Mk2C BSK (exBFK) 35506 Regional Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSK (exBFK) 35508 West Coast Railways (OO)

BR Mk2C BSK (exBFK) 35508 West Coast Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSO 9440 South Wales & West Blue (OO)

BR Mk2C BSO 9440 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5453 South Wales & West Blue (OO)

BR Mk2B TSO 5453 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5463 Maroon (South Wales & West) (OO)

BR Mk2B TSO 5463 Maroon (South Wales & West) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5491 South Wales & West Blue (OO)

BR Mk2B TSO 5491 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Bachmann BR Mk2F TSO Anglia '6148' (OO) (DCC)

BR Mk2F TSO Anglia '6148' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 6148 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets Door Interlock Lights (when used on DCC, the lights on each side are controlled independently of each other) DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F FO Anglia '3336' (OO) (DCC)

BR Mk2F FO Anglia '3336' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 3336 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F FO BR InterCity (Swallow) '3414' (OO) (DCC)

BR Mk2F FO BR InterCity (Swallow) '3414' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine BR InterCity Swallow livery Running No. 3414 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Bachmann BR Mk2F RFB Anglia '1218' (OO) (DCC)

BR Mk2F RFB Anglia '1218' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 1218 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets Door Interlock Lights (when used on DCC, the lights on each side are controlled independently of each other) DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F TSO Anglia '5921' (OO) (DCC)

BR Mk2F TSO Anglia '5921' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 5921 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets Door Interlock Lights (when used on DCC, the lights on each side are controlled independently of each other) DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F DBSO BR Blue & Grey (Inter-City) 'SC9703' (OO) (DCC)

BR Mk2F DBSO BR Blue & Grey (Inter-City) 'SC9703' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. The DBSOs were used in Scotland to work push-pull services, usually with a Class 47/7 locomotive at the other end that had been specially modified to allow push-pull operations. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F DBSO in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panel is completed with metal wire grab handles. The inner end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the inner end, including the ETH socket and cabling, along with pipework and dummy knuckle couplings. It's the cab that makes the DBSO instantly recognisable amongst the Mk2 fleet and here, every detail has been considered, from the glazed cab windows with their separate window wiper to the corridor gangway with its optional cover. Again, a full set of bufferbeam pipework and accessories is included, along with the obstacle deflector, a characteristic feature of the DBSOs when viewed front-on. The light clusters complete the front end and working lights are fitted as standard. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief along with additional details like the speedometers found on the DBSOs. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, guard’s compartment and luggage area, complete with the caging which enclosed it. The livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC four separate lighting features can be enjoyed with individual control of the interior, Guard’s compartment and cab lights, plus the directional lights which display red or white according to the direction of travel. When used on analogue control, the interior lights and directional lights will work when power is applied. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. SC9703 Directional Lighting Interior Lighting DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F DBSO BR ScotRail '9709' (OO) (DCC)

BR Mk2F DBSO BR ScotRail '9709' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. The DBSOs were used in Scotland to work push-pull services, usually with a Class 47/7 locomotive at the other end that had been specially modified to allow push-pull operations. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F DBSO in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panel is completed with metal wire grab handles. The inner end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the inner end, including the ETH socket and cabling, along with pipework and dummy knuckle couplings. It's the cab that makes the DBSO instantly recognisable amongst the Mk2 fleet and here, every detail has been considered, from the glazed cab windows with their separate window wiper to the corridor gangway with its optional cover. Again, a full set of bufferbeam pipework and accessories is included, along with the obstacle deflector, a characteristic feature of the DBSOs when viewed front-on. The light clusters complete the front end and working lights are fitted as standard. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief along with additional details like the speedometers found on the DBSOs. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, guard’s compartment and luggage area, complete with the caging which enclosed it. The livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC four separate lighting features can be enjoyed with individual control of the interior, Guard’s compartment and cab lights, plus the directional lights which display red or white according to the direction of travel. When used on analogue control, the interior lights and directional lights will work when power is applied. Features: Pristine BR ScotRail livery Running No. 9709 Directional Lighting Interior Lighting DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Hornby BR, Mk4 DVT '82218' Intercity Swallow

BR, Mk4 DVT '82218' Intercity Swallow This BR Driving Van Trailer comes with directional lighting, extra detail accessories and a 21-pin decoder socket, allowing you to fit an HM7000 decoder and speaker, giving it sound options. This DVT is compatible with BR Intercity Mk4 coaches and a BR Intercity Class 91 locomotive. The BR InterCity Mk4 DVT was designed to work with Mk4 carriages on the East Coast Main Line as a driver control car working in push-pull mode with Class 91 electric locomotives on InterCity 225 trains. Introduced in 1990, the DVT would normally be marshalled at the south end of the train, adjacent to the First Class carriages. The model is finished in the classic 1990s InterCity ‘Swallow’ livery of white with a dark grey mid-section and a lower red band, with full yellow ends. DVT 82218 still exists as a barrier/translator vehicle owned by the Harry Needle Railroad Company. - DCC Ready 21-Pin Socket - OO Scale

Bachmann BR Mk2F DBSO (Refurb.) Driving Brake Sec. Open BR InterCity (Swa

BR Mk2F DBSO (Refurb.) Driving Brake Sec. Open BR InterCity (Swallow) Includes - DCC FITTED - Running Number 9708 - Accessory Pack including Obstacle Deflectors - NEM Coupling Pockets - Close Coupling Mechanism - Directional Lighting - Interior Lighting - Door Interlock Lighting (when used on DCC) - DCC-control of all lighting via the integrated DCC decoder - OO Scale