Hornby RailRoad: TEA 100T Tanker Esso BRT 20060

RailRoad: TEA 100T Tanker Esso BRT 20060 Being a Railroad product, this TEA tanker painted in all over grey and red with Esso and BRT brandings is a durable, free-running wagon perfect for those looking to bolster their wagon fleet at an affordable price - OO Scale

Hornby RailRoad: TEA 100T Tanker Shell 87155

RailRoad: TEA 100T Tanker Shell 87155 Being a Railroad product, this TEA tanker, finished in Shell's corporate livery and carrying a small TLF Petrol sector decal, is a durable, free-running wagon, perfect for those looking to bolster their wagon fleet at an affordable price. - OO Scale

Bachmann LNER 12T Ventilated Fruit Van BR Bauxite (Early)

LNER 12T Ventilated Fruit Van BR Bauxite (Early) Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, some of which were intended for specific traffic like this Fruit Van built by the London and North Eastern Railway (LNER). The fruit vans sported louvres at each end and ventilators on the roof to allow fresh air to circulate within, keeping fruit fresh during its journey. This Branchline models depicts one of those wooden bodied vans and the planked body is replicated with fine engraving, with precision moulding to capture every detail of the sliding doors and their mechanism, topped off with a separately fitted metal door handle. On the roof, the six ventilators are each moulded in full relief before being added individually, the central pair being offset as per the prototype. The chassis employs metal wheelsets of the 3-hole disc variety around which safety loops are added from formed metal wire, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Pristine BR Bauxite (Early) livery Running No. E222078 NEM Coupling Pockets Length 90mm (over couplings)

Bachmann LNER 12T Ventilated Fruit Van BR Bauxite (Late)

LNER 12T Ventilated Fruit Van BR Bauxite (Late) Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, some of which were intended for specific traffic like this Fruit Van built by the London and North Eastern Railway (LNER). The fruit vans sported louvres at each end and ventilators on the roof to allow fresh air to circulate within, keeping fruit fresh during its journey. This Branchline models depicts one of those wooden bodied vans and the planked body is replicated with fine engraving, with precision moulding to capture every detail of the sliding doors and their mechanism, topped off with a separately fitted metal door handle. On the roof, the six ventilators are each moulded in full relief before being added individually, the central pair being offset as per the prototype. The chassis employs metal wheelsets of the 3-hole disc variety around which safety loops are added from formed metal wire, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. MODEL FEATURES: Bachmann Branchline OO Scale Era 5 Pristine BR Bauxite (Late) livery Running No. E222476 Lettered ‘VANFIT’ NEM Coupling Pockets Length 90mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Bauxite (TOPS)

BR 12T Ventilated Van Plywood Sides BR Bauxite (TOPS) British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 7 Pristine BR Bauxite (TOPS) livery Running No. B769573 TOPS Code VVV NEM Coupling Pockets Length 88mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Dept. Olive w/Chevrons

BR 12T Ventilated Van Plywood Sides BR Dept. Olive w/Chevrons British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 7 Pristine BR Departmental Olive Green with Chevrons livery Running No. ADB786510 TOPS Code ZRV NEM Coupling Pockets Length 88mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Bauxite (Early)

BR 12T Ventilated Van Plywood Sides BR Bauxite (Early) British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Pristine BR Bauxite (Early) livery Running No. B775484 NEM Coupling Pockets Length 88mm (over couplings)

Bachmann SR 12T Even Planked Ventilated Van BR Bauxite (Early) S49107

SR 12T Even Planked Ventilated Van BR Bauxite (Early) S49107 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine BR Bauxite (Early) livery Running No. S49107 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van Express Dairy Company N48359

SR 12T Even Planked Ventilated Van Express Dairy Company N48359 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine Express Dairy Company Blue livery Running No. N48359 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van SR Brown 48472

SR 12T Even Planked Ventilated Van SR Brown 48472 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine SR Brown livery Running No. 48472 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann BR OCA Open Wagon BR Railfreight Red 112038

BR OCA Open Wagon BR Railfreight Red 112038 The OCA wagons were introduced at the start of the 1980s, becoming British Rail’s final standard design for a general purpose open wagon with wide, low sides made up of three hinged sections etc. to allow all manner of cargo to be loaded and unloaded. Introduced at a time when general merchandise traffic was in decline, the type was soon redeployed to other areas like departmental use, or rebuilt as timber carriers becoming OTAs. The Bachmann Branchline model features fine moulding throughout; from the bodysides and the representation of the doors on each side including hinge and securing chain detailing, to the interior and in particular the wagon floor with engraved planks and further moulded details. The chassis features an ensemble of brake equipment while each axle is mounted to chassis via a separate axlebox assembly, allowing a degree of pivot and rotation to ensure this long wheelbase wagon can negotiate model railway curves. Details: Pristine BR Railfreight Red livery Running No. 112038 Features: NEM Coupling Pockets Length 156mm (over couplings) - OO Scale

Hornby Railroad: Royal Mail Travelling Post Office 80331

Railroad: Royal Mail Travelling Post Office 80331 The Traveling Post Office (TPO) has been a fixture on Britain’s railways since mail was first carried on trains in the 1830s.  The sorting of mail in transit gradually reduced in the 21st century as mechanised sorting at depots became commonplace and concerns about the safety of workers carrying out letter-sorting at increased main line speeds. The last TPO using carriages in the UK took place during the night of 9th January 2004. After that, a fleet of Royal Mail-branded Class 325 EMUs continued to carry parcels by rail, but these too ceased in 2024. TPOs could collect and deposit mail on the move by means of lineside apparatus. Several of these vehicles have survived in preservation. This Hornby RailRoad model coach features a working mailbag transfer mechanism. - OO Scale

Hornby Railroad: 12T Tank, PO 7 Plank & Cattle Wagon Triple Pack

Railroad: 12T Tank, PO 7 Plank & Cattle Wagon Triple Pack Triple-wagon packs are a great way to increase the freight stock on any layout and save money at the same time. This OO gauge model railway wagon pack includes three different types of wagon to add variety, including a private owner open wagon, a 12-ton tank wagon, and a cattle wagon. - OO Scale

Hornby Railroad: BR Mk1 NKA 94157 "Super GUV" RES

Railroad: BR Mk1 NKA 94157 "Super GUV" RES Rail Express Services (RES) was the BR sector responsible for the transport of mail and parcels, including the Travelling Post Office. General Utility Vans (GUVs) were used in large numbers to transport mail and parcels, though some were used as newspaper vans.  These vehicles were part of the BR Mk1 coach family and 907 examples were built between 1956 and 1960 by BR at its York, Doncaster and Glasgow works. A number were also produced under contract by the Pressed Steel Company Ltd at Cowley, near Oxford. With a carrying capacity of 13.8 tons (14 tonnes) these multi-door bogie vans were versatile, some even being converted for carrying motor vehicles. Some train operating companies still use them, and a number have found further use at heritage railways.  This RailRoad RES Mk1 Super Guv model coach is a durable, detailed option for your model railway collection. - OO Scale

Hornby Railroad: Cattle Wagon North British Grey

Railroad: Cattle Wagon North British Grey Used primarily for transporting cattle, although they were also used to move sheep, these wagons were a common sight across Britain’s railways. They could be found at rural stations where there was a cattle dock and pens. This OO gauge model cattle wagon example is grey with North British markings. - OO Scale

Hornby PO 5 Plank Wagon Snow & Sons Coal & Coke Wallingford No.65

PO 5 Plank Wagon Snow & Sons Coal & Coke Wallingford No.65 H.W. Snow & Sons were coal and coke merchants based in Wallingford, Oxfordshire. Their wagons featured the distinctive diagonal red lozenge and transported coal from the GWR main line at Cholsey along the branch line to Wallingford for transfer to road.  This charming 5 Plank Wagon model beautifully replicates one of their fleet, bringing coal freight to your model railway layout. - OO Scale

Hornby PO 7 Plank Wagon Mortimore Chippenham No.56

PO 7 Plank Wagon Mortimore Chippenham No.56 Thousands of coal wagons were built to a broadly standard design for use by private companies who had rail-connected coal yards. Mortimore’s were coal merchants at Chippenham, Wiltshire.  This highly detailed OO gauge scale model is an excellent representation of their 7 plank wagon, and is perfect for your freight model railway. - OO Scale

Bachmann 35 Ton PAV Bulk Grain Wagon BRT Brown

35 Ton PAV Bulk Grain Wagon BRT Brown The 35 Ton Grain Hopper Wagons, sometimes known as Whisky Covhops (COVered HOPpers), were built in the late-1960s for the transportation of grain from growing regions like East Anglia and South East England to the whisky distilleries of Scotland. The 4 wheel hopper wagons provided an increased payload over the types they replaced and were operated by Associated British Maltsters Ltd. And Scottish Malt Distillers. At first bold and colourful advertising boards were carried on the sides of wagons, but these were soon removed leaving just the brown livery, although some were later painted into the more eye catching ‘Grainflow’ scheme of green and grey. In later years some wagons were used on Alumina traffic in Scotland but all had been withdrawn before the end of the twentieth century. Features: Pristine BRT Brown Livery Running No. 7587 Length 118mm (over couplings) - Era 7 - OO Scale

Bachmann 35 Ton PAV Bulk Grain Wagon BRT Brown [W]

35 Ton PAV Bulk Grain Wagon BRT Brown [W] The 35 Ton Grain Hopper Wagons, sometimes known as Whisky Covhops (COVered HOPpers), were built in the late-1960s for the transportation of grain from growing regions like East Anglia and South East England to the whisky distilleries of Scotland. The 4 wheel hopper wagons provided an increased payload over the types they replaced and were operated by Associated British Maltsters Ltd. And Scottish Malt Distillers. At first bold and colourful advertising boards were carried on the sides of wagons, but these were soon removed leaving just the brown livery, although some were later painted into the more eye catching ‘Grainflow’ scheme of green and grey. In later years some wagons were used on Alumina traffic in Scotland but all had been withdrawn before the end of the twentieth century. Features: Weathered BRT Brown Livery Running No. 7616 Length 118mm (over couplings) - Era 7 - OO Scale

Bachmann 35 Ton PAA Bulk Grain Wagon 'Grainflow' Green & Grey [W]

35 Ton PAA Bulk Grain Wagon 'Grainflow' Green & Grey [W]  The 35 Ton Grain Hopper Wagons, sometimes known as Whisky Covhops (COVered HOPpers), were built in the late-1960s for the transportation of grain from growing regions like East Anglia and South East England to the whisky distilleries of Scotland. The 4 wheel hopper wagons provided an increased payload over the types they replaced and were operated by Associated British Maltsters Ltd. And Scottish Malt Distillers. At first bold and colourful advertising boards were carried on the sides of wagons, but these were soon removed leaving just the brown livery, although some were later painted into the more eye catching ‘Grainflow’ scheme of green and grey. In later years some wagons were used on Alumina traffic in Scotland but all had been withdrawn before the end of the twentieth century. Features: Weathered ‘Grainflow’ Green & Grey Livery Running No. BRT 7781 Length 118mm (over couplings) - Era 8 - OO Scale

Bachmann LMS 20T Brake Van LMS (L M S) Grey '730037' (OO)

LMS 20T Brake Van LMS (L M S) Grey '730037' This new Bachmann Branchline model of the LMS Standard 20 Ton Brake Van sets a new standard for these iconic vehicles, of which 2,774 examples were built between 1935 and 1950, first by the London, Midland and Scottish Railway (LMS) and then by British Railways (BR) who recognised the merits of the LMS design. With an extensive tooling suite catering for many of the variations that were incorporated into the real vans during their construction and subsequent use, authentic models can be produced of brake vans in their early years when first entering traffic in the 1930s, to their final days in departmental use at the end of the twentieth century. Boasting a wealth of detail, from the separately fitted metal handrails to the individual brake components and cabin interior, the new Branchline models are fitted with blackened metal wheelsets and NEM coupling pockets, providing smooth running and operational versatility alongside their good looks. The icing on the cake is the livery application, with rich paintwork and authentic numbering and markings, completing this valuable addition to the extensive range of Branchline goods rolling stock. Features: Pristine LMS Grey (L M S) livery Running No. 730037 Model depicts a Diagram D1919 van with: Through Vacuum Pipes Shallow Guard Duckets Narrow Ducket Beading Rivetted End Panels Extended Buffers Shallow Ballast Weights Accessory Pack NEM Coupling Pockets Length 118mm (over couplings) - Era 3 - OO Scale

Bachmann LMS 20T Brake Van LMS Grey '730203' (OO)

LMS 20T Brake Van LMS Grey '730203' This new Bachmann Branchline model of the LMS Standard 20 Ton Brake Van sets a new standard for these iconic vehicles, of which 2,774 examples were built between 1935 and 1950, first by the London, Midland and Scottish Railway (LMS) and then by British Railways (BR) who recognised the merits of the LMS design. With an extensive tooling suite catering for many of the variations that were incorporated into the real vans during their construction and subsequent use, authentic models can be produced of brake vans in their early years when first entering traffic in the 1930s, to their final days in departmental use at the end of the twentieth century. Boasting a wealth of detail, from the separately fitted metal handrails to the individual brake components and cabin interior, the new Branchline models are fitted with blackened metal wheelsets and NEM coupling pockets, providing smooth running and operational versatility alongside their good looks. The icing on the cake is the livery application, with rich paintwork and authentic numbering and markings, completing this valuable addition to the extensive range of Branchline goods rolling stock. Features: Pristine LMS Grey (LMS) livery Running No. 730203 Model depicts a Diagram D1919 van with: Through Vacuum Pipes Shallow Guard Duckets Narrow Ducket Beading Rivetted End Panels Extended Buffers Shallow Ballast Weights Accessory Pack NEM Coupling Pockets Length 118mm (over couplings) - Era 3 - OO Scale

Accurascale HTV Hopper BR Bauxite - Pack K

HTV Hopper BR Bauxite - Pack K Features: Minimum Radius 438mm (2nd Radius Set-track) Weight 35g minimum Die-cast chassis for ideal weight RP25-110 profile OO gauge wheels with separate brake blocks in line with tread Sprung metal buffers and dummy instanter couplings Super fine plastic parts, incl. brake gear, lamp irons, handrails, hopper door operating equipment, etc. Removable, Kinetic NEM coupler mounts at correct height with mini-tension-lock couplers provided with scale Instanters included 2mm diameter axles that are 26mm over pinpoints - OO Scale

Bachmann BR VBA Van EWS '200557' (OO)

BR VBA Van EWS '200557'  In the late 1960s British Railways required air braked stock to operate its new Air-Braked Network services – which would later be known as Speedlink -  and the Cov AB (Covered, Air Braked) van provided the answer, becoming BR’s first general purpose air braked van. Introduced from 1969, the Cov ABs had a modern appearance in comparison to the wooden box vans in widespread use at the time and the side of the van was constructed from a pair of doors, providing large openings for loading/unloading. When the Total Operations Processing System (TOPS) was introduced in the 1970s the vans were given the TOPS code VAB, VAA, VBA or VBB. Used to transport general merchandise, the vans were often marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so commenced their withdrawal although a small number remained in service towards the end of the century, coming under private ownership following Privatisation. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine EWS livery Running No. 200557 NEM Coupling Pockets Length 156mm (over couplings) - Era 9 - OO Scale

Bachmann BR VDA Van BR Railfreight Distribution Sector '200882' (OO)

BR VDA Van BR Railfreight Distribution Sector '200882' The VDA van was a development of British Rail’s Cov AB air-braked van which was first introduced in the late 1960s, with the VDAs entering traffic from 1975. Sharing the same 20ft 9in wheelbase as the original Cov ABs, the VDAs not only had sliding doors to allow the sides to be fully opened for loading/unloading but these doors could also be opened individually as cupboard doors to allow quicker access to just one internal area. The vans entered traffic in Speedlink services and were used to transport general merchandise, often being marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so many VDAs were rebuilt to suit new traffic, most notably as OTA timber carrying wagons or low sided ballast/spoil wagons where were often coded as ZCA ‘Sea Urchins’. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine BR Railfreight Distribution Sector livery Running No. 200882 NEM Coupling Pockets Length 156mm (over couplings) - Era 8 - OO Scale

Bachmann BR VDA Van BR Railfreight Red & Grey '200819' [W] (OO)

BR VDA Van BR Railfreight Red & Grey '200819' [W] The VDA van was a development of British Rail’s Cov AB air-braked van which was first introduced in the late 1960s, with the VDAs entering traffic from 1975. Sharing the same 20ft 9in wheelbase as the original Cov ABs, the VDAs not only had sliding doors to allow the sides to be fully opened for loading/unloading but these doors could also be opened individually as cupboard doors to allow quicker access to just one internal area. The vans entered traffic in Speedlink services and were used to transport general merchandise, often being marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so many VDAs were rebuilt to suit new traffic, most notably as OTA timber carrying wagons or low sided ballast/spoil wagons where were often coded as ZCA ‘Sea Urchins’. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Weathered BR Railfreight Red & Grey livery Running No. 200819 NEM Coupling Pockets Length 156mm (over couplings) - Era 7 - OO Scale

Bachmann BR VAA Van BR Railfreight Red & Grey '200633' [W] (OO)

BR VAA Van BR Railfreight Red & Grey '200633' [W] In the late 1960s British Railways required air braked stock to operate its new Air-Braked Network services – which would later be known as Speedlink -  and the Cov AB (Covered, Air Braked) van provided the answer, becoming BR’s first general purpose air braked van. Introduced from 1969, the Cov ABs had a modern appearance in comparison to the wooden box vans in widespread use at the time and the side of the van was constructed from a pair of doors, providing large openings for loading/unloading. When the Total Operations Processing System (TOPS) was introduced in the 1970s the vans were given the TOPS code VAB, VAA, VBA or VBB. Used to transport general merchandise, the vans were often marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so commenced their withdrawal although a small number remained in service towards the end of the century, coming under private ownership following Privatisation. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Weathered BR Railfreight Red & Grey livery Running No. 200633 NEM Coupling Pockets Length 156mm (over couplings) - Era 7 - OO Scale

Bachmann BR VAA Van BR Railfreight Red & Grey '200648' (OO)

BR VAA Van BR Railfreight Red & Grey '200648' In the late 1960s British Railways required air braked stock to operate its new Air-Braked Network services – which would later be known as Speedlink -  and the Cov AB (Covered, Air Braked) van provided the answer, becoming BR’s first general purpose air braked van. Introduced from 1969, the Cov ABs had a modern appearance in comparison to the wooden box vans in widespread use at the time and the side of the van was constructed from a pair of doors, providing large openings for loading/unloading. When the Total Operations Processing System (TOPS) was introduced in the 1970s the vans were given the TOPS code VAB, VAA, VBA or VBB. Used to transport general merchandise, the vans were often marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so commenced their withdrawal although a small number remained in service towards the end of the century, coming under private ownership following Privatisation. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine BR Railfreight Red & Grey livery Running No. 200648 NEM Coupling Pockets Length 156mm (over couplings) - Era 7 - OO Scale

Bachmann 1 Plank 'Lowfit' Wagon BR Bauxite (Late) 'B450161'

1 Plank 'Lowfit' Wagon BR Bauxite (Late) 'B450161' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, flat bed wagons with a single plank along each edge which was hinged and so could be lowered to allow cargo to be rolled on and off. Such wagons were employed to move things like tractors, motor cars and other relatively small machinery that was happy being exposed to the elements during the journey. Anchor points were provided on the wagon floor so that loads could be tied down, and the cargo could be sheeted if necessary to offer some protection from weather and general railway dirt. The ‘Lowfit’ wagon depicted by this Bachmann Branchline model was so called because of its low sides and fitted brakes and on the Branchline model, the wagon body is injection moulded, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, while the metal rings fitted to each anchor point are replicated too. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake leavers, brake linkage and a vacuum cylinder all present and correct. The model runs on 3-hole disc wheels which are of metal construction whilst metal buffer heads and cosmetic coupling hooks adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application prototype, completing this high-fidelity model. MODEL FEATURES: Pristine BR Bauxite (Late) livery Running No. B450161 NEM Coupling Pockets Length 88mm (over couplings) - Era 5 - OO Scale

Bachmann 1 Plank 'Lowfit' Wagon BR Bauxite (Late) [W] 'B450166'

1 Plank 'Lowfit' Wagon BR Bauxite (Late) [W] 'B450166' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, flat bed wagons with a single plank along each edge which was hinged and so could be lowered to allow cargo to be rolled on and off. Such wagons were employed to move things like tractors, motor cars and other relatively small machinery that was happy being exposed to the elements during the journey. Anchor points were provided on the wagon floor so that loads could be tied down, and the cargo could be sheeted if necessary to offer some protection from weather and general railway dirt. The ‘Lowfit’ wagon depicted by this Bachmann Branchline model was so called because of its low sides and fitted brakes and on the Branchline model, the wagon body is injection moulded, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, while the metal rings fitted to each anchor point are replicated too. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake leavers, brake linkage and a vacuum cylinder all present and correct. The model runs on 3-hole disc wheels which are of metal construction whilst metal buffer heads and cosmetic coupling hooks adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application prototype, completing this high-fidelity model. MODEL FEATURES: Weathered BR Bauxite (Late) livery Running No. B450166 NEM Coupling Pockets Length 88mm (over couplings) - Era 5 - OO Scale

Hornby BR, Horse Box Bertram Mills Circus '707'

BR, Horse Box Bertram Mills Circus '707' In the mid-20th century, the UK railway network was used to transport a large number of horses, mainly those travelling between race meetings but also private, circus and military horses. This example is a Bertram Mills Circus Horsebox . The Bertram Mills Circus was famous for its Christmas shows at Olympia in West London. - OO Scale

Hornby BR, 20t Brake Van, BR Green Coal Sector 'CAR B955167'

BR, 20t Brake Van, BR Green Coal Sector 'CAR B955167' Until 1968, fully fitted freight trains were required by law to carry a brake van at the end. The brake van provided brake functionality to help slow the train and acted as a space where the train guard could carry out additional duties such as paperwork. As a result, most brake vans featured a stove and desk on top of the brake apparatus. This example of a British Rail brake van comes in an eye-catching BR green paint scheme. - OO Scale

Hornby 12t Tanker Wagon, BP Shell 'A5066'

12t Tanker Wagon, BP Shell 'A5066' The tank wagon was the main method of transporting liquid cargo in the early days of the railway. Instead of loading liquids into drums or barrels and then having to load these on and off closed or open vans at each side of a journey, the tank wagon could be filled with the fluid of choice of the operator and then emptied at the other end. This also increased the carrying capacity of each wagon, as a wagon with a 12-tonne weight limit could carry more fluid if it did not have to factor in the weight of many barrels on top of their contents. This type of tank wagon was more commonly seen hauling hazardous liquid chemicals, with different designs for milk and other such cargo. To replicate true freight operations on your layout, look no further than this BP/Shell silver-liveried 12T tank wagon with the running number A5066. - OO Scale

Rapido UK Diagram N19 – BR No.23016 (OO)

Diagram N19 – BR No.23016 Includes: - BR No.23016 - N19 steel-bodied loco coal wagon - BR(W) livery - Spoked wheels running in metal bearings - High level of detail above and below the floor line - NEM coupler pockets - 1:76 scale (OO gauge)

Rapido UK Diagram N19 – BR No.9912 (OO)

Diagram N19 – BR No.9912 Includes: - BR No.9912 - N19 steel-bodied loco coal wagon - BR(W) livery - Spoked wheels running in metal bearings - High level of detail above and below the floor line - NEM coupler pockets - 1:76 scale (OO gauge)

Rapido UK Diagram N19 – BR No.W9331 (OO)

Diagram N19 – BR No.W9331 Includes: - BR No.W9331 - N19 steel-bodied loco coal wagon - BR grey - Spoked wheels running in metal bearings - High level of detail above and below the floor line - NEM coupler pockets - 1:76 scale (OO gauge)

Hornby LMS, 'Salmon' Bogie Wagon - Era 3

LMS, 'Salmon' Bogie Wagon - Era 3 Includes: - Detailed wagon body - LMS bauxite Livery - Sprung buffers - NEM coupling pockets  - Tension lock couplings - Will traverse minimum 2nd radius curves (R606 / R607) - Era 3 - OO Scale

Hornby BR, YMO 'Salmon' Bogie Bolster Wagon - Era 7

BR, YMO 'Salmon' Bogie Bolster Wagon The Hornby Salmon range is a new tooling for 2023 with almost all variants of the wagon catered for. Fitted with diecast chassis, these wagons have fantastic weight that rolls freely on metal wheels. Bolsters are included in the accessory Includes: - Detailed wagon body - BR black Livery - Sprung buffers - NEM coupling pockets  - Tension lock couplings - Will traverse minimum 2nd radius curves (R606 / R607) - Era 7 - OO Scale

Hornby BR, 27T Iron Ore Tippler Wagon - Era 7

BR, 27T Iron Ore Tippler Wagon - Era 7 Includes: - Detailed body sides - Seperate underframe parts - NEM Copulings and pockets - OO Scale

Hornby RailRoad Procor, PVA Van - Era 8

RailRoad Procor, PVA Van - Era 8 Includes: - Railroad range - Procor Livery - Body side detail and fine printing - Will traverse Radius 2 curves - Fixed Tension lock couplings - OO scale  

Bachmann GWR 20T 'Toad' Brake Van BR Departmental Yellow DW35724

GWR 20T 'Toad' Brake Van BR Departmental Yellow DW35724 Features: Pristine BR Departmental Yellow livery Running No. DW35724 NEM Coupling Pockets Length 112mm Brake Vans were once essential parts of any goods train and each railway company had its own designs, but perhaps none were as iconic and widely recognised as the Great Western Railway’s (GWR) ‘Toad’ Brake Van. Found across the GWR network from the late 1800s and into BR ownership serving the Western Region and beyond, the ‘Toad’ provided guards with a spacious cabin and large veranda at one end giving this classic GWR design its distinctive appearance. The Bachmann Branchline ‘Toad’ features an injection moulded bodyshell with plank detail alongside representations of the bodyside handrails and lamp brackets that were fixed to each side and end. The handbrake wheel sits prominently inside the open sided veranda, joined by two sandboxes, whilst below the solebar footboards are fitted separately, and metal spoked wheelsets are employed to provide smooth running. The livery application is to the high standard associated you’ve come to expect from a Bachmann Branchline model, making this ‘Toad’ a perfect addition to any goods wagon fleet. - Era 8 - OO Scale

Hornby BR, Loriot Y Machinery Truck with British Railways Coles Crane -

BR, Loriot Y Machinery Truck with British Railways Coles Crane - Era 4 Includes: - Loriot Y Flat wagon - Wood deck detailing - NEM coupling pockets - Separate Diecast Coles Crane - British Railways branding - Crane wheels, Jib arm and body are positioning - Era 4  - OO scale Vehicle information: Under the GWR telegraphic code, flat wagons designed to transport heavy machinery carried on the tradition of animal names by being called ‘Loriot’. The first wagon was in service from 1892.  Design for the ‘Loriot’ wagons evolved to include sloping ramps at either end, enabling the machinery to be loaded and unloaded quickly and efficiently. Previous versions featured low, wide wells and no end ramps.  A new wagon in the series, ‘Loriot Y’, was constructed in 1937 to Diagram G39 and its number was No. 41989. An update to the design included ‘I’ beam girders rather than rolled beams and end-axle guard plates. No. 41990 (DW41990 under BR) was the second Loriot Y wagon to be constructed in 1939. The wagon conveyed excavators and other plant machinery over the GWR network. During the Second World War, the two wagons were used constantly to transport bulldozers for when there was wartime bombing. The ‘Loriot Y’ wagon model represents the prototypical wagon under BR ownership. The running number, DW41990, is emblazoned on the side. A wood grain print is used to replicate the wooden planks seen on the prototypical model. The model’s load is a BR Coles Crane, made by CORGI®.

Hornby RailRoad Satlink Western, 45t ZRA Closed Van, KDC201003 - Era 8

RailRoad Satlink Western, 45t ZRA Closed Van, KDC201003 - Era 8 Includes: - Satlink Western Red and Yellow Livery - Body side detail and fine printing - Will traverse Radius 2 curves - Fixed Tension lock couplings - OO scale Vehicle information: The VDA van is a type of air-braked closed van built by BR between 1969 and 1977. The vans, reminiscent of a classic vent van albeit extended served a very similar purpose to their stout predecessors. The VDA was a general use van designed to haul anything and everything.  The VDA vans were used on 'Speedlink' services designed to quickly haul general freight around the country. The wagons were rapidly withdrawn after the 'Speedlink' service was discontinued; 436 vans were in service at the end of 1990 but by August 1994 only 97 were shown on BR books. By 2008, only two VDA vans remained.

Bachmann HRA Bogie Hopper DB Cargo 41 70 6723 036-3 (OO)

HRA Bogie Hopper DB Cargo 41 70 6723 036-3 The HRA Bogie Hopper Wagon is the next modern freight wagon to receive the Bachmann Branchline treatment and this model sports the vibrant red livery of DB Cargo. The first HRA entered traffic in 2017, being created by cutting down the HTA wagons, of which more than 1,000 were built for EWS to transport coal. With the phasing out of coal fired power stations, a new use for the HTAs was needed. As stone is far denser than coal, repurposing HTA wagons for aggregate was inefficient as they could not be fully loaded before becoming overweight, therefore shortening the wagons allowed the same payload to be moved with a shorter length train than if unmodified HTAs were used. To create the HRAs, one hopper bay is removed from the HTA before the two ends are welded back together, and these changes are faithfully reproduced on these OO scale models. The ‘cut and shut’ nature of the rebuilds is evidenced by the weld lines midway along the wagon sides and these marks are captured in model form, along with details such as the hopper doors, handwheels and separate pipe runs. Each wagon runs on bogies fitted with metal wheelsets and comes pre-fitted with buckeye couplings – as fitted to most of the prototypes. Standard tension lock couplings which fit into the NEM coupling pockets on the bogies are supplied for optional fitting. DB Cargo’s bright red provides the base colour, against which the logo, safety warnings, instructions and TOPS information all in white contrasts. Buffers are also supplied as optional fittings, allowing wagons to be configured as ‘inners’ without any buffers or as ‘outers’ which usually carry buffers at one end only. Features: Pristine DB Cargo livery Running No. 41 70 6723 036-3 Accessory Pack NEM Coupling Pockets Length 192mm - Era 9 - OO Scale

Bachmann HRA Bogie Hopper DB Cargo 41 70 6723 062-9 (OO)

HRA Bogie Hopper DB Cargo 41 70 6723 062-9  The HRA Bogie Hopper Wagon is the next modern freight wagon to receive the Bachmann Branchline treatment and this model sports the vibrant red livery of DB Cargo. The first HRA entered traffic in 2017, being created by cutting down the HTA wagons, of which more than 1,000 were built for EWS to transport coal. With the phasing out of coal fired power stations, a new use for the HTAs was needed. As stone is far denser than coal, repurposing HTA wagons for aggregate was inefficient as they could not be fully loaded before becoming overweight, therefore shortening the wagons allowed the same payload to be moved with a shorter length train than if unmodified HTAs were used. To create the HRAs, one hopper bay is removed from the HTA before the two ends are welded back together, and these changes are faithfully reproduced on these OO scale models. The ‘cut and shut’ nature of the rebuilds is evidenced by the weld lines midway along the wagon sides and these marks are captured in model form, along with details such as the hopper doors, handwheels and separate pipe runs. Each wagon runs on bogies fitted with metal wheelsets and comes pre-fitted with buckeye couplings – as fitted to most of the prototypes. Standard tension lock couplings which fit into the NEM coupling pockets on the bogies are supplied for optional fitting. DB Cargo’s bright red provides the base colour, against which the logo, safety warnings, instructions and TOPS information all in white contrasts. Buffers are also supplied as optional fittings, allowing wagons to be configured as ‘inners’ without any buffers or as ‘outers’ which usually carry buffers at one end only. Features: Pristine DB Cargo livery Running No. 41 70 6723 062-9 Accessory Pack NEM Coupling Pockets Length 192mm - Era 9 - OO Scale

Bachmann HRA Bogie Hopper DB Cargo 41 70 6723 073-6 (OO)

HRA Bogie Hopper DB Cargo 41 70 6723 073-6  The HRA Bogie Hopper Wagon is the next modern freight wagon to receive the Bachmann Branchline treatment and this model sports the vibrant red livery of DB Cargo. The first HRA entered traffic in 2017, being created by cutting down the HTA wagons, of which more than 1,000 were built for EWS to transport coal. With the phasing out of coal fired power stations, a new use for the HTAs was needed. As stone is far denser than coal, repurposing HTA wagons for aggregate was inefficient as they could not be fully loaded before becoming overweight, therefore shortening the wagons allowed the same payload to be moved with a shorter length train than if unmodified HTAs were used. To create the HRAs, one hopper bay is removed from the HTA before the two ends are welded back together, and these changes are faithfully reproduced on these OO scale models. The ‘cut and shut’ nature of the rebuilds is evidenced by the weld lines midway along the wagon sides and these marks are captured in model form, along with details such as the hopper doors, handwheels and separate pipe runs. Each wagon runs on bogies fitted with metal wheelsets and comes pre-fitted with buckeye couplings – as fitted to most of the prototypes. Standard tension lock couplings which fit into the NEM coupling pockets on the bogies are supplied for optional fitting. DB Cargo’s bright red provides the base colour, against which the logo, safety warnings, instructions and TOPS information all in white contrasts. Buffers are also supplied as optional fittings, allowing wagons to be configured as ‘inners’ without any buffers or as ‘outers’ which usually carry buffers at one end only. Features: Pristine DB Cargo livery Running No. 41 70 6723 073-6  Accessory Pack NEM Coupling Pockets Length 192mm - Era 9 - OO Scale

Bachmann HRA Bogie Hopper DB Cargo 41 70 6723 101-5 (OO)

HRA Bogie Hopper DB Cargo 41 70 6723 101-5 The HRA Bogie Hopper Wagon is the next modern freight wagon to receive the Bachmann Branchline treatment and this model sports the vibrant red livery of DB Cargo. The first HRA entered traffic in 2017, being created by cutting down the HTA wagons, of which more than 1,000 were built for EWS to transport coal. With the phasing out of coal fired power stations, a new use for the HTAs was needed. As stone is far denser than coal, repurposing HTA wagons for aggregate was inefficient as they could not be fully loaded before becoming overweight, therefore shortening the wagons allowed the same payload to be moved with a shorter length train than if unmodified HTAs were used. To create the HRAs, one hopper bay is removed from the HTA before the two ends are welded back together, and these changes are faithfully reproduced on these OO scale models. The ‘cut and shut’ nature of the rebuilds is evidenced by the weld lines midway along the wagon sides and these marks are captured in model form, along with details such as the hopper doors, handwheels and separate pipe runs. Each wagon runs on bogies fitted with metal wheelsets and comes pre-fitted with buckeye couplings – as fitted to most of the prototypes. Standard tension lock couplings which fit into the NEM coupling pockets on the bogies are supplied for optional fitting. DB Cargo’s bright red provides the base colour, against which the logo, safety warnings, instructions and TOPS information all in white contrasts. Buffers are also supplied as optional fittings, allowing wagons to be configured as ‘inners’ without any buffers or as ‘outers’ which usually carry buffers at one end only. Features: Pristine DB Cargo livery Running No. 41 70 6723 101-5 Accessory Pack NEM Coupling Pockets Length 192mm - Era 9 - OO Scale