Rapido UK RCH 1907 Salt Van Imperial Chemical Industries Ltd. No.11

RCH 1907 Salt Van Imperial Chemical Industries Ltd. Fleetwood Salt No.11 RCH 1907 Spec Peaked-Roof Salt Van Imperial Chemical Industries ? Fleetwood Salt No. 11 Salt van with peaked roof Round-bottom grease axleboxes Single-sided brakes Angled V hangers Plain tapered buffers Split-spoke wheels running in metal bearings High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale (OO gauge) UK designed

Bachmann LNER 12T Ventilated Fruit Van BR Bauxite (Early)

LNER 12T Ventilated Fruit Van BR Bauxite (Early) Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, some of which were intended for specific traffic like this Fruit Van built by the London and North Eastern Railway (LNER). The fruit vans sported louvres at each end and ventilators on the roof to allow fresh air to circulate within, keeping fruit fresh during its journey. This Branchline models depicts one of those wooden bodied vans and the planked body is replicated with fine engraving, with precision moulding to capture every detail of the sliding doors and their mechanism, topped off with a separately fitted metal door handle. On the roof, the six ventilators are each moulded in full relief before being added individually, the central pair being offset as per the prototype. The chassis employs metal wheelsets of the 3-hole disc variety around which safety loops are added from formed metal wire, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Pristine BR Bauxite (Early) livery Running No. E222078 NEM Coupling Pockets Length 90mm (over couplings)

Bachmann LNER 12T Ventilated Fruit Van BR Bauxite (Late)

LNER 12T Ventilated Fruit Van BR Bauxite (Late) Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, some of which were intended for specific traffic like this Fruit Van built by the London and North Eastern Railway (LNER). The fruit vans sported louvres at each end and ventilators on the roof to allow fresh air to circulate within, keeping fruit fresh during its journey. This Branchline models depicts one of those wooden bodied vans and the planked body is replicated with fine engraving, with precision moulding to capture every detail of the sliding doors and their mechanism, topped off with a separately fitted metal door handle. On the roof, the six ventilators are each moulded in full relief before being added individually, the central pair being offset as per the prototype. The chassis employs metal wheelsets of the 3-hole disc variety around which safety loops are added from formed metal wire, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. MODEL FEATURES: Bachmann Branchline OO Scale Era 5 Pristine BR Bauxite (Late) livery Running No. E222476 Lettered ‘VANFIT’ NEM Coupling Pockets Length 90mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Bauxite (TOPS)

BR 12T Ventilated Van Plywood Sides BR Bauxite (TOPS) British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 7 Pristine BR Bauxite (TOPS) livery Running No. B769573 TOPS Code VVV NEM Coupling Pockets Length 88mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Dept. Olive w/Chevrons

BR 12T Ventilated Van Plywood Sides BR Dept. Olive w/Chevrons British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 7 Pristine BR Departmental Olive Green with Chevrons livery Running No. ADB786510 TOPS Code ZRV NEM Coupling Pockets Length 88mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Bauxite (Early)

BR 12T Ventilated Van Plywood Sides BR Bauxite (Early) British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Pristine BR Bauxite (Early) livery Running No. B775484 NEM Coupling Pockets Length 88mm (over couplings)

Bachmann SR 12T Even Planked Ventilated Van BR Bauxite (Early) S49107

SR 12T Even Planked Ventilated Van BR Bauxite (Early) S49107 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine BR Bauxite (Early) livery Running No. S49107 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van Express Dairy Company N48359

SR 12T Even Planked Ventilated Van Express Dairy Company N48359 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine Express Dairy Company Blue livery Running No. N48359 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van SR Brown 48472

SR 12T Even Planked Ventilated Van SR Brown 48472 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine SR Brown livery Running No. 48472 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Hornby Railroad: 12T Tank Wagon Mobil Black No.64

Railroad: 12T Tank Wagon Mobil Black No.64 Based on the Railway Clearing House standard tank wagon design of 1907, hundreds of these 12-ton wagons were used by private owners to transport liquid products, including fuel oil and kerosene, among other products.  The tanks sat on a wooden frame and were secured using steel bracing straps. They were commonplace through the 1960s, when they started to be replaced by larger capacity tank wagons, though examples could still be found in use into the 1980s.  This OO gauge model tank wagon example is in the distinctive ‘Mobil’ colour scheme. - OO Scale

Hornby PO 5 Plank Wagon Charles Gush & Son Exminster No.20

PO 5 Plank Wagon Charles Gush & Son Exminster No.20 Established in the late 1870s by Charles Gush’s father, Samuel, the business started as a baker and grocer in Exminster, Devon, before expanding as General Merchants. Their services included the collection of coal from local sidings and distribution by lorry, and it operated through the 1950s and ‘60s.  Three wooden-bodied wagons were acquired for the movement of coal, numbered 10, 20 and 30. Our 5 Plank Wagon model replica is a faithful example of No.20 and the perfect addition to your freight model railway. - OO Scale

Rapido UK LB&SCR Dia.8 Van BR Grey 'S46680'

LB&SCR Dia.8 Van BR Grey 'S46680' Features: LBSC Diagram 8 Van BR grey No. S46680 Double-sided brakes with double V-hangers Unfitted 8-spoke wheels running in metal bearings Wooden door stops High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

Rapido UK LB&SCR Dia.8 Van MOD Internal User Black '590'

LB&SCR Dia.8 Van MOD Internal User Black '590' Features: LBSC Diagram 8 Van MOD internal user black No. 590 Double-sided brakes with single V-hangers Unfitted 8-spoke wheels running in metal bearings Wooden door stops High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

Rapido UK LB&SCR Dia.8 Van SR Brown (IoW, post-’36) '46954'

LB&SCR Dia.8 Van SR Brown (IoW, post-’36) '46954' Features: LBSC Diagram 8 Van SR brown (IoW, post-’36) No. 46954 Double-sided brakes with double V-hangers Through-piped 9-spoke wheels running in metal bearings Wooden door stops High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale  

Rapido UK LB&SCR Dia.8 Van SR Brown (IoW, pre-’36, Preserved) '46923'

LB&SCR Dia.8 Van SR Brown (IoW, pre-’36, Preserved) '46923' Features: LBSC Diagram 8 Van SR brown (IoW, pre-’36, preserved) No. 46923 Double-sided brakes with double V-hangers Unfitted 8-spoke wheels running in metal bearings Side steps Wooden door stops High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

Rapido UK LB&SCR Dia.8 Van SR Brown (pre-‘36) '46293'

LB&SCR Dia.8 Van SR Brown (pre-‘36) '46293' Features: LBSC Diagram 8 Van SR brown (pre-‘36) No. 46293 Double-sided brakes with double V-hangers Unfitted 9-spoke wheels running in metal bearings Wooden door stops High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

Rapido UK LB&SCR Dia.8 Van SR Departmental Grey (post-’36) '01246S'

LB&SCR Dia.8 Van SR Departmental Grey (post-’36) '01246S' Features: LBSC Diagram 8 Van SR departmental grey (post-’36) No. 01246S Double-sided brakes with double V-hangers Unfitted 4-hole disc wheels running in metal bearings Wooden door stops High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale  

Rapido UK LB&SCR Dia.8 Van BR Departmental Grey 'DS1913'

LB&SCR Dia.8 Van BR Departmental Grey 'DS1913' Features: LBSC Diagram 8 Van BR departmental grey No. DS1913 Double-sided brakes with double V-hangers Unfitted 4-hole disc wheels running in metal bearings Wooden door stops High level of detail above and below the floor line High quality livery application NEM coupler pockets 1:76 scale, (OO gauge) UK designed - OO Scale

Bachmann BR VBA Van EWS '200557' (OO)

BR VBA Van EWS '200557'  In the late 1960s British Railways required air braked stock to operate its new Air-Braked Network services – which would later be known as Speedlink -  and the Cov AB (Covered, Air Braked) van provided the answer, becoming BR’s first general purpose air braked van. Introduced from 1969, the Cov ABs had a modern appearance in comparison to the wooden box vans in widespread use at the time and the side of the van was constructed from a pair of doors, providing large openings for loading/unloading. When the Total Operations Processing System (TOPS) was introduced in the 1970s the vans were given the TOPS code VAB, VAA, VBA or VBB. Used to transport general merchandise, the vans were often marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so commenced their withdrawal although a small number remained in service towards the end of the century, coming under private ownership following Privatisation. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine EWS livery Running No. 200557 NEM Coupling Pockets Length 156mm (over couplings) - Era 9 - OO Scale

Bachmann BR VAA Van BR Railfreight Red & Grey '200633' [W] (OO)

BR VAA Van BR Railfreight Red & Grey '200633' [W] In the late 1960s British Railways required air braked stock to operate its new Air-Braked Network services – which would later be known as Speedlink -  and the Cov AB (Covered, Air Braked) van provided the answer, becoming BR’s first general purpose air braked van. Introduced from 1969, the Cov ABs had a modern appearance in comparison to the wooden box vans in widespread use at the time and the side of the van was constructed from a pair of doors, providing large openings for loading/unloading. When the Total Operations Processing System (TOPS) was introduced in the 1970s the vans were given the TOPS code VAB, VAA, VBA or VBB. Used to transport general merchandise, the vans were often marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so commenced their withdrawal although a small number remained in service towards the end of the century, coming under private ownership following Privatisation. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Weathered BR Railfreight Red & Grey livery Running No. 200633 NEM Coupling Pockets Length 156mm (over couplings) - Era 7 - OO Scale

Bachmann BR VAA Van BR Railfreight Red & Grey '200648' (OO)

BR VAA Van BR Railfreight Red & Grey '200648' In the late 1960s British Railways required air braked stock to operate its new Air-Braked Network services – which would later be known as Speedlink -  and the Cov AB (Covered, Air Braked) van provided the answer, becoming BR’s first general purpose air braked van. Introduced from 1969, the Cov ABs had a modern appearance in comparison to the wooden box vans in widespread use at the time and the side of the van was constructed from a pair of doors, providing large openings for loading/unloading. When the Total Operations Processing System (TOPS) was introduced in the 1970s the vans were given the TOPS code VAB, VAA, VBA or VBB. Used to transport general merchandise, the vans were often marshalled into mixed goods trains as opposed to being operated as uniform rakes and could carry all manner of general merchandise. By the 1980s their traffic was reducing and so commenced their withdrawal although a small number remained in service towards the end of the century, coming under private ownership following Privatisation. The Bachmann Branchline model employs a highly detailed bodyshell which boasts precision moulded panel lines, door handles and mechanisms, and fine rivet detailing. At either end a separate lamp iron is present, along with metal buffers and a cosmetic coupling hook. The solebar includes prototypical detailing along with the door runners, whilst the wagon’s suspension and brake gear is added using separate components. The metal wheelsets are mounted on a pivoting frame, allowing this long wheelbase wagon to traverse tight curves with ease whilst NEM coupling pockets are also incorporated. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine BR Railfreight Red & Grey livery Running No. 200648 NEM Coupling Pockets Length 156mm (over couplings) - Era 7 - OO Scale

Bachmann 5 Plank Wagon Steel Floor 'Tarslag (1923) Ltd.' Grey (OO)

5 Plank Wagon Steel Floor 'Tarslag (1923) Ltd.' Grey Britain’s Railways were developed primarily to move freight and by the early twentieth century, hundreds of independent companies were operating their own wagons to transport their goods around the UK by rail. Fleet sizes ranged from small concerns with a single wagon to large enterprises whose wagon count could run into the hundreds. The majority of wagons in private ownership were wooden bodied open wagons and by far the most common commodity that they carried was coal, although other materials, including coke, minerals and aggregates might also be transported depending on the nature of business conducted by the wagon’s owner. This model forms part of our new Railway Celebrations range, selected because of its close links to the Stockton & Darlington area and because it symbolises the revolution that the railways provided. Tarslag operated a fleet of hundreds of wagons to carry furnace slag and road asphalt and their operations embodied the freedom of movement afforded by the railway revolution, with concerns in Wolverhampton on the Great Western Railway and Stockton on Tees served by the LNER amongst others, trains including Tarslag wagons would be seen across the UK. The Bachmann Branchline model portrays a 5 Plank Wagon with side doors to aid loading and unloading, and a steel floor. These details are faithfully replicated on the model, with neatly engraved plank lines and finely moulded metal work and rivets. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake levers and metal door stops completing the look. The model runs on split spoked wheels which are of metal construction whilst metal buffer heads and cosmetic coupling hooks adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine ‘Tarslag (1923) Ltd.’ Grey livery Running No. 825 NEM Coupling Pockets Length 83mm (over couplings) - Era 3 - OO Scale

Bachmann 5 Plank Wagon Wooden Floor 'F. H. Silvey & Co.' Brown (OO)

5 Plank Wagon Wooden Floor 'F. H. Silvey & Co.' Brown Britain’s Railways were developed primarily to move freight and by the early twentieth century, hundreds of independent companies were operating their own wagons to transport their goods around the UK by rail. Fleet sizes ranged from small concerns with a single wagon to large enterprises whose wagon count could run into the hundreds. The majority of wagons in private ownership were wooden bodied open wagons and by far the most common commodity that they carried was coal, although other materials, including coke, minerals and aggregates might also be transported depending on the nature of business conducted by the wagon’s owner. Following Nationalisation in 1948, most wagons would be absorbed into British Railways ownership. Various types of 5 Plank Wagon were built, and this Bachmann Branchline model depicts one with side doors to aid loading and unloading, and a wooden floor. These details are faithfully replicated on the model, with neatly engraved plank lines and finely moulded metal work and rivets. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake levers and metal door stops completing the look. The model runs on split spoked wheels which are of metal construction whilst metal buffer heads and cosmetic coupling hooks adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application process, completing this high-fidelity model. Features: Pristine ‘F. H. Silvey & Co.’ Brown livery Running No. 193 NEM Coupling Pockets Length 83mm (over couplings) - Era 2 - OO Scale

Bachmann 1 Plank 'Lowfit' Wagon BR Bauxite (Late) 'B450161'

1 Plank 'Lowfit' Wagon BR Bauxite (Late) 'B450161' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, flat bed wagons with a single plank along each edge which was hinged and so could be lowered to allow cargo to be rolled on and off. Such wagons were employed to move things like tractors, motor cars and other relatively small machinery that was happy being exposed to the elements during the journey. Anchor points were provided on the wagon floor so that loads could be tied down, and the cargo could be sheeted if necessary to offer some protection from weather and general railway dirt. The ‘Lowfit’ wagon depicted by this Bachmann Branchline model was so called because of its low sides and fitted brakes and on the Branchline model, the wagon body is injection moulded, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, while the metal rings fitted to each anchor point are replicated too. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake leavers, brake linkage and a vacuum cylinder all present and correct. The model runs on 3-hole disc wheels which are of metal construction whilst metal buffer heads and cosmetic coupling hooks adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application prototype, completing this high-fidelity model. MODEL FEATURES: Pristine BR Bauxite (Late) livery Running No. B450161 NEM Coupling Pockets Length 88mm (over couplings) - Era 5 - OO Scale

Bachmann 1 Plank 'Lowfit' Wagon BR Bauxite (Late) [W] 'B450166'

1 Plank 'Lowfit' Wagon BR Bauxite (Late) [W] 'B450166' Britain’s railways were developed primarily to move freight and over time, a wide range of wagons were developed to suit the varied cargo that the railway companies had been contracted to transport. Among them were short wheelbase, flat bed wagons with a single plank along each edge which was hinged and so could be lowered to allow cargo to be rolled on and off. Such wagons were employed to move things like tractors, motor cars and other relatively small machinery that was happy being exposed to the elements during the journey. Anchor points were provided on the wagon floor so that loads could be tied down, and the cargo could be sheeted if necessary to offer some protection from weather and general railway dirt. The ‘Lowfit’ wagon depicted by this Bachmann Branchline model was so called because of its low sides and fitted brakes and on the Branchline model, the wagon body is injection moulded, incorporating hinges along each edge and with securing chains represented at each corner. The wooden deck of the wagon is depicted with crisp engraving to define the separate wooden planks, while the metal rings fitted to each anchor point are replicated too. Below the solebar the W irons, axleboxes and springs are all reproduced to great effect, with separate brakes and brake leavers, brake linkage and a vacuum cylinder all present and correct. The model runs on 3-hole disc wheels which are of metal construction whilst metal buffer heads and cosmetic coupling hooks adorn the bufferbeams. Authentic colours and typefaces are employed during the livery application prototype, completing this high-fidelity model. MODEL FEATURES: Weathered BR Bauxite (Late) livery Running No. B450166 NEM Coupling Pockets Length 88mm (over couplings) - Era 5 - OO Scale

Hornby RailRoad: 'Williamson' Plank Wagon

RailRoad: 'Williamson' Plank Wagon This open plank wagon carrying the name ‘Williamson Ltd Coal of Liverpool’ is an ideal model to add to a steam period freight train. Whilst wooden plank wagons were mainly used during the steam era, they remained on the rails into the diesel era and there are many still on preserved railways around the UK today making this a timeless piece to add to a model railway layout. These private owner wagons represent one of the thousands that were used throughout the 20th century to transport goods. Wagons could be found in countless different liveries belonging to independent companies as well as railway companies. As well as transporting manufactured goods, simple wagons like this could also be found moving materials such as coal when no more suitable wagons were available. - OO Scale

Hornby RailRoad: 'Campbell' Vent Van

RailRoad: 'Campbell' Vent Van This RailRoad vent van, carrying the name ‘Cambell Industrial’, is an ideal model to add to a steam-period freight train. Whilst wooden vent vans were mainly used during the steam era, they remained on the rails into the diesel era and there are many still on preserved railways around the UK today making this a timeless piece to add to a model railway layout. The vent van was a small multipurpose goods van which transported all manner of items whilst keeping them protected from the wind and rain. The wagon design features a single vent on each end of the structure, allowing air to flow, thereby maintaining a cooler air temperature, beneficial for the transportation of perishable food items. Closed vans were often loaded with all manner of miscellany such as flour, meat, parcels or perhaps scale models. - OO Scale

Hornby RailRoad: 'Edwards' Plank Wagon

RailRoad: 'Edwards' Plank Wagon This open plank wagon carrying the name ‘Edwards Coal Co Ltd’ is an ideal model to add to a steam-period freight train. Whilst wooden plank wagons were mainly used during the steam era, they remained on the rails into the diesel era and there are many still on preserved railways around the UK today making this a timeless piece to add to a model railway layout. These private owner wagons represent one of the thousands that were used throughout the 20th century to transport goods. Wagons could be found in countless different liveries belonging to independent companies as well as railway companies. As well as transporting manufactured goods, simple wagons like this could also be found moving materials such as coal when no more suitable wagons were available. - OO Scale

Hornby RailRoad: 'Harris' Plank Wagon

RailRoad: 'Harris' Plank Wagon This open plank wagon, carrying the name ‘Harris & Co Coal Merchants Nottinghamshire’ is an ideal model to add to a steam period freight train. Whilst wooden plank wagons were mainly used during the steam era, they remained on the rails into the diesel era and there are many still on preserved railways around the UK today making this a timeless piece to add to a model railway layout. These private owner wagons represent one of the thousands that were used throughout the 20th century to transport goods. Wagons could be found in countless different liveries belonging to independent companies as well as railway companies. As well as transporting manufactured goods, simple wagons like this could also be found moving materials such as coal when no more suitable wagons were available. - OO Scale

Hornby RailRoad: 'James Brothers' Vent Van

RailRoad: 'James Brothers' Vent Van This RailRoad vent van carrying the name ‘James Brothers Portland Cement nr Maidstone’ is an ideal model to add to a steam-period freight train. Whilst wooden vent vans were mainly used during the steam era they remained on the rails into the diesel era and there are many still on preserved railways around the UK today, making this a timeless piece to add to a model railway layout. The vent van was a small multipurpose goods van which would transport all manner of items whilst keeping them protected from the wind and rain. The wagon design features a single vent on each end of the structure allowing air to flow, thereby maintaining a cooler air temperature, beneficial for the transportation of perishable food items. Closed vans would often be loaded with all manner of miscellany such as flour, meat, parcels or perhaps scale models. - OO Scale

Hornby RailRoad: 'Watkins' Vent Van

RailRoad: 'Watkins' Vent Van This RailRoad vent van carrying the name ‘Josph M Watkins Co Ltd of Cardiff’ is an ideal model to add to a steam-period freight train. Whilst wooden vent vans were mainly used during the steam era, they remained on the rails into the diesel era and there are many still on preserved railways around the UK today making this a timeless piece to add to a model railway layout. The vent van was a small multipurpose goods van which transported all manner of items whilst keeping them protected from the wind and rain. The wagon design features a single vent on each end of the structure allowing air to flow, thereby maintaining a cooler air temperature, beneficial for the transportation of perishable food items. Closed vans would often be loaded with all manner of miscellany such as flour, meat, parcels or perhaps scale models. - OO Scale

Hornby PO, 4 Plank Wagon, BQC Cranophast No423

PO, 4 Plank Wagon, BQC Cranophast No423 This open plank wagon carrying the name ‘BQC’ is an ideal model to add to a steam period freight train. Whilst wooden plank wagons were mainly used during the steam era they remained on the rails into the diesel era and there are many still on preserved railways around the UK today making this a timeless piece to add to a model railway layout.These private owner wagons represent one of thousands that were used throughout the 20th century to transport goods. Wagons could be found in countless different liveries belonging to independent companies as well as railway companies. This private owner wagon is based on BQC. - OO Scale

Hornby PO, 4 Plank Wagon, Charles Abell No214

PO, 4 Plank Wagon, Charles Abell No214 This open plank wagon carrying the name ‘Charles Abell’ is an ideal model to add to a steam period freight train. Whilst wooden plank wagons were mainly used during the steam era, they remained on the rails into the diesel era and there are many still on preserved railways around the UK today making this a timeless piece to add to a model railway layout.These private owner wagons represent one of the thousands that were used throughout the 20th century to transport goods. Wagons could be found in countless different liveries belonging to independent companies as well as railway companies. This private owner wagon is based on Charles Abell which would have mainly transported granite in the Midlands region. - OO Scale

Rapido UK Diagram N19 – BR No.23016 (OO)

Diagram N19 – BR No.23016 Includes: - BR No.23016 - N19 steel-bodied loco coal wagon - BR(W) livery - Spoked wheels running in metal bearings - High level of detail above and below the floor line - NEM coupler pockets - 1:76 scale (OO gauge)

Rapido UK Diagram N19 – BR No.9912 (OO)

Diagram N19 – BR No.9912 Includes: - BR No.9912 - N19 steel-bodied loco coal wagon - BR(W) livery - Spoked wheels running in metal bearings - High level of detail above and below the floor line - NEM coupler pockets - 1:76 scale (OO gauge)

Rapido UK Diagram N19 – BR No.W9331 (OO)

Diagram N19 – BR No.W9331 Includes: - BR No.W9331 - N19 steel-bodied loco coal wagon - BR grey - Spoked wheels running in metal bearings - High level of detail above and below the floor line - NEM coupler pockets - 1:76 scale (OO gauge)

Hornby Tarmac Quarry Products, PGA Hopper - Era 8

Tarmac Quarry Products, PGA Hopper - Era 8 Includes: - Detailed hopper wagon - TARMAC Livery - Number 14856 - Printed data panel details - Fixed tension lock couplings - Metal wheels - 128mm long - Era 8  - OO Scale

Hornby ARC, PGA Hopper - Era 8

ARC, PGA Hopper - Era 8 Includes: - Detailed hopper wagon - ARC Livery - Number 14656 - Printed panel details - Fixed tension lock couplings - Metal wheels - 128mm long - Era 8  - OO Scale

Hornby LMS, 'Salmon' Bogie Wagon - Era 3

LMS, 'Salmon' Bogie Wagon - Era 3 Includes: - Detailed wagon body - LMS bauxite Livery - Sprung buffers - NEM coupling pockets  - Tension lock couplings - Will traverse minimum 2nd radius curves (R606 / R607) - Era 3 - OO Scale

Hornby BR, Loriot Y Machinery Truck with British Railways Coles Crane -

BR, Loriot Y Machinery Truck with British Railways Coles Crane - Era 4 Includes: - Loriot Y Flat wagon - Wood deck detailing - NEM coupling pockets - Separate Diecast Coles Crane - British Railways branding - Crane wheels, Jib arm and body are positioning - Era 4  - OO scale Vehicle information: Under the GWR telegraphic code, flat wagons designed to transport heavy machinery carried on the tradition of animal names by being called ‘Loriot’. The first wagon was in service from 1892.  Design for the ‘Loriot’ wagons evolved to include sloping ramps at either end, enabling the machinery to be loaded and unloaded quickly and efficiently. Previous versions featured low, wide wells and no end ramps.  A new wagon in the series, ‘Loriot Y’, was constructed in 1937 to Diagram G39 and its number was No. 41989. An update to the design included ‘I’ beam girders rather than rolled beams and end-axle guard plates. No. 41990 (DW41990 under BR) was the second Loriot Y wagon to be constructed in 1939. The wagon conveyed excavators and other plant machinery over the GWR network. During the Second World War, the two wagons were used constantly to transport bulldozers for when there was wartime bombing. The ‘Loriot Y’ wagon model represents the prototypical wagon under BR ownership. The running number, DW41990, is emblazoned on the side. A wood grain print is used to replicate the wooden planks seen on the prototypical model. The model’s load is a BR Coles Crane, made by CORGI®.

Hornby L&MR Horse Wagon Pack

L&MR Horse Wagon Pack Includes: - Detailed victorian era wagons - Chain couplings for linking to other Hornby L&MR stock. - Spoked wheels - Wooden body effect  - OO Scale Rolling stock historical information: Liverpool and Manchester Railway Wagons have long been a popular sight in many a railway enthusiasts layout, and pack contains 3 Wagons tailored for horses.

Hornby L&MR Sheep Wagon Pack

L&MR Sheep Wagon Pack Includes: - Detailed victorian era wagons - Chain couplings for linking to other Hornby L&MR stock. - Spoked wheels - Wooden body effect  - OO Scale Rolling stock historical information: Liverpool and Manchester Railway Wagons have long been a popular sight in many a railway enthusiasts layout, and pack contains 3 Wagons tailored for sheep.