Hornby HM7000: 6 BLE Decoder 6 Pin w/ Fine Wire (No Sound)

HM7000: 6 BLE Decoder 6 Pin w/ Fine Wire (No Sound) Part of the innovative HM7000 range, this new 6-pin Bluetooth® and DCC decoder is designed to get smaller locomotives working on the HM7000 system. The 6-pin connectors are located on the end of flexible wires, giving you more flexibility when installing the decoder in models with limited space. The decoder is designed to supply 1000mA continuous load to the main motor and a peak demand of 1500mA, making it highly suitable for most N scale locos and small TT, HO and OO locomotives. An R7377 Power Bank can be purchased separately and added to this decoder. We recommend for ease you do this during the first install. The Power Bank will keep the loco operating during short power outages when running over dirty track or complex points.

Hornby HM7000: Power Bank Maxi

HM7000: Power Bank Maxi The R7416 Power Bank Maxi is our largest power bank and will keep locomotives with larger motors that require more pulling power, running over any potential dead spots. The space require inside a locomotive for this power bank is 22 x 12 x 10mm.  The Power Bank Maxi can be connected into the current range of HM7000 DCC Bluetooth decoders. A simple plug & play socket means there's no soldering required! Why use one? Your layout will occasionally suffer from dirty track or small electrical dead spots at points and crossings. The small loss of power can cause locomotives to stop, but with DCC Sound Decoders it can also cause the sounds to reset and restart. Avoid both issues by fitting a Power Bank. Perfect locomotive running and optimal control! (The Power Bank is not suitable for use without an HM7000 decoder, connecting it directly to other decoders or directly to the wiring of a model locomotive may cause damage to the Power Bank, your locomotive or your non-HM7000 decoder). For small locomotives we have a smaller Power Bank available R7377 Power Bank

DCC Concepts DCC Decoder Convertor 3 Wire to 2 Wire (3)

DCC Decoder Convertor 3 Wire to 2 Wire (3) Pack of three solenoid decoders. The SDC is a clever wee device that takes the outputs from a 3-wire accessory decoder and turns them into a 2-wire reversing DC decoder, allowing you to use most solenoid accessory decoders to power Kato, Cobalt or other brands of point motor. Available in 6 and 12 packs also.

AE Model Nano 6-Pin 2 Function Decoder

AE Model Nano 6-Pin 2 Function Decoder 6-Pin Direct, 2 Function DCC Decoder 1.1A Peak Power 8.3mm x 10mm x 2mm All AE decoders conform to NMRA and NEM standards. They are produced to the highest quality standards. They also include many unique features and are tailored to give best performance straight from the box.

Bachmann 21 Pin DCC Loco-Decoder (with Brake Button function)

21 Pin DCC Loco-Decoder (with Brake Button function) A 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket (do not use with the Bachmann Branchline Class 90 – use 36-569A with these models). This decoder replaces item No. 36-557 and can be used in any model for which item No. 36-557 is recommended Highlights include: Dual-mode DCC/DC decoder with Back EMF function 10 powered function outputs (+8 logic level outputs and 2 logic level/SUSI outputs) 1.5A continuous load RailComPlus® for automatic registration when used with selected DCC systems Suitable for models equipped with DC motors (including coreless motors) Brake Button function for realistic control of braking (operates on F2) Operating Modes: NMRA/DCC with 14, 28 and 128 speed steps Short and Long addresses DCC and DC operation (DC operation is de-selectable) Automatic recognition of operational mode and DCC speed step selection Supports Lenz® LG 100 braking sections Supports ABC braking sections Motor Control Features Suitable for models equipped with DC motors (including coreless motors) 1.5A continuous load Motor regulation with pulse width frequency from 10kHz to 50kHz Motor output overload protection; Back EMF (de-selectable) Function Outputs: 10 powered function outputs with overload protection (4 via 21MTC pins, 6 via solder pads) 10 logic level outputs (8 via 21MTC pins, 2 via solder pads) 250mA load per output 500mA total load of all function outputs 2 additional logic outputs Shunting speed and momentum key selectable Brake Button function for realistic control of braking (operates on F2) Dimensions: 21.4mm x 15.5mm x 4.5mm Default Address: Address 3 Programming: DCC Service Mode & DCC PoM (Programming on Main) Additional Features: RailCom® Feedback system RailComPlus® automatic Registration

Hornby HM7000-21TXS: Bluetooth® & DCC Sound Decoder (21-pin)

HM7000-21TXS: Bluetooth® & DCC Sound Decoder (21-pin) For use with HM7000 APP

Hornby HM7000-6: Bluetooth® & DCC Decoder (6-pin)

HM7000-6: Bluetooth® & DCC Decoder (6-pin) For use with HM7000 APP 

Hornby HM7000-8TXS: Bluetooth® & DCC Sound Decoder (8-pin)

HM7000-8TXS: Bluetooth® & DCC Sound Decoder (8-pin) For use with HM7000 APP

Hornby HM7000-N18TXS: Bluetooth® & DCC Sound Decoder (Next18-pin)

HM7000-N18TXS: Bluetooth® & DCC Sound Decoder (Next18-pin)

Hornby HM7070 - Power Bank

HM7070 - Power Bank Stay-alive for use with HM7000 decoders

Bachmann 6 Pin 90° DCC Loco-Decoder

6 Pin 90° DCC Loco-Decoder  

Bachmann 6 Pin Micro DCC Loco-Decoder (with Brake Button function)

6 Pin Micro DCC Loco-Decoder (with Brake Button function)

DCC Concepts DCD-ZNM.HP.6 Zen Black Decoder Midi-Sized 8PIN Harness 6 Fct

DCD-ZNM.HP.6 Zen Black Decoder Midi-Sized 8PIN Harness 6 Fct Includes – 3 Amps peak power– 1.5 Amps continuous RMS power– 6 functions (2x 250mA, 4x 100mA)– Size 30mm x 18.3mm x 6mm– 8-pin harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Brown-Out Protection on-board

DCC Concepts DCD-ZNmini.4 Zen Black Decoder Mini 8Pin

DCD-ZNmini.4 Zen Black Decoder Mini 8Pin Includes – 1.1 Amps peak power– 750mA continuous power– 4 functions at 100mA each– 19mm x 11mm x 6mm– 8-pin & harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Brown-Out Protection on-board– Stay-Alive connection

DCC Concepts DCD-ZBHP.6 Zen Black Buddha Decoder O & Larger Scale

DCD-ZBHP.6 Zen Black Buddha Decoder O & Larger Scale Includes  – 5 Amps peak power– 3 Amps continuous power– 6 functions at 250mA each– On-board high-power stay-alive– 42mm x 27mm x 13mm– 12 screw terminals– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)

DCC Concepts DCD-ZN68.2 Zen Blue+Decoder NEM651 6-Pin Direct/ Harness 2 Funct

DCD-ZN68.2 Zen Blue+Decoder NEM651 6-Pin Direct/ Harness 2 Funct Includes - 1.1Amps Peak Power - 750mA Continuous power - 2 Functions at 100mA each - Dimensions 13.5mm x 8.5mm - 6 PIN Direct, 6 PIN Harness and 8 PIN Harness - One step loco setup  

DCC Concepts DCC Decoder Convertor 3 Wire to 2 Wire (3)

DCC Decoder Convertor 3 Wire to 2 Wire (3) - Pack of three solenoid decoders. - The SDC is a clever wee device that takes the outputs from a 3-wire accessory decoder and turns them into a 2-wire reversing DC decoder, allowing you to use most solenoid accessory decoders to power Kato, Cobalt or other brands of point motor. - Please note that for motor drive decoders you will also need to set ‘power on’ time for between 2 and 4 seconds.

Bachmann Class 90 DCC Loco-Decoder w/Servo Motor Operation & Brake

A 21 Pin (21MTC) DCC Decoder configured for use in the Bachmann Branchline Class 90 – models produced from 2021 onwards. Configured to control the servo-motor-operated Pantograph. Highlights include: Dual-mode DCC/DC decoder with Back EMF function 1.2A continuous load Brake Button function for realistic control of braking Controls the servo-motor-operated Pantograph Default Functions when fitted to Bachmann Branchline Class 90 F0 - Direction Lights on/off F1 - Cab Lights (Directional) on/off F2 - Brake Button F3 - Day/Night Mode F4 - Direction Lights Off (Non-Pantograph End) F5 - Direction Lights Off (Pantograph End) F6 - Pantograph Up/Down

AE Model AED-6PD.2 6-PIN Direct Function Decoder

AED-6PD.2 6-PIN Direct Function Decoder - 2 Function Decoder

Bachmann Next18 DCC Loco-Decoder (with Brake Button function)

Bachmann Next18 DCC Loco-Decoder (with Brake Button function) - F2 on your DCC controller will activate break function (in the case of sound fitted locomotives you will hear brake sounds too) - Pressing F2 down will bring the locomotive to a complete standstill