Scale Model Scenery Polsue Barn – Laser-cut kit (OO)

Polsue Barn – Laser-cut kit A versatile barn/workshop building suitable for farm, railway or industrial use. Inspired by a building in Mevagissey, Cornwall. Suitable for both beginners and the more experienced modeller, this kit is cleverly designed - containing not one, not two, but THREE buildings in one! A barn/store, a workshop with double-width wooden doors, and an open lean-to. The three buildings can be positioned separately or all together as one (as shown). The kit contains interior and exterior wall wraps in our popular old stone texture - instantly transforming an ordinary wooden building into a property rich with character and history. The kit also includes slate roofing strips, corrugated iron roofing wraps, laser-cut windows and doors with engraved planks, hinges and locks. The small window is prototypically boarded up and the upper window can also be half-glazed if required. Doors and window frames require painting before the kit is assembled which can be done with solvent or acrylic based paints. We used a Plastikote Stone color for our test build which we then dry-brushed with burnt umber, white & slate grey artists acrylics to create a weathered wood look.  There's also plenty of scope for customisation too... with the slates being applied in individual strips it's easy to build it in either pristine or derelict condition (or anywhere in between), plus the optional steps at the end of the building can be omitted to give the appearance of them being demolished at some point, or to allow passing carts, lorries or wagons to be loaded via the side door. - OO Scale

Ratio Railway Wagon Weighbridge (OO)

Railway Wagon Weighbridge (OO) One of the fundamental aspects of safety on the railway was that wagons should never be overloaded. To do so would risk trains not having sufficient braking capacity to slow and stop safely. To manage loading at many industrial locations, each wagon would pass over a Weighbridge - to check their weight. Each wagon would display its tare weight, which could be deducted from the total weight, to ascertain the net weight of the load - simple mathematics! The new Ratio kit is a great representation of a typical Weighbridge, not dissimilar to the one, once located at Shildon Wagon Works in the North East. Combining a mixture of materials, the plastic parts make up the hut and laser-cut wood parts form the actual weighing scales, which fit in and around a length of ST-201 PECO Setrack track, included in the kit.  Includes: Plastic kit and laser-cut wood parts Length: 140mm Width: 80mm Kit requires suitable plastic /wood glue and paints to complete NOT included OO Scale

Parkside Sand - OO Gauge wagon load

Sand - OO Gauge wagon load Includes: - Bag of loose material (enough for 3x wagons) - Need to place loose material on base piece (Cardboard or plastic sheet) cut to size of the inside of the wagon. - Stick the loose material down with PVA. - Might require packing piece under load to set the right height and in order to retrieve the load to run as empty. - OO Scale

Parkside Limestone - OO Gauge wagon loads

Limestone - OO Gauge wagon loads Includes: - Bag of loose material (enough for 3x wagons) - Need to place loose material on base piece (Cardboard or plastic sheet) cut to size of the inside of the wagon. - Stick the loose material down with PVA. - Might require packing piece under load to set the right height and in order to retrieve the load to run as empty.   - OO Scale

W&T/Smiths Smiths Screw Link Couplings Brass/Steel (4)

Smiths Screw Link Couplings Brass/Steel  Includes: - Four pairs of screw links ready assembled  - Ready to run rolling stock and kits might require modification - OO Scale Historical information: Screw link couplings were first introduced as onward development of 3 link couplings and bettering railway standards from the 1830s onwards. Unlike standard 3 link couplings, the centre link was replaced with a threaded bar and handle. The practice was that wagons/rolling stock buffering up would just have the buffers touching (not compressed), than the shunter would throw the coupling on and tighten the threaded bar with the handle). This would keep the buffers at the desired distance and stop any chance of slack and buffering effect on the train when accelerating or decelerating. Most 'Non Passenger' Express rated goods trains and rolling stock had screw links fitted. The LNER used screw links as a standard on all vacuum fitted rolling stock. This is a practice that continued after WW2 and used on British Railway rolling stock.

W&T/Smiths Smiths Standard 3 Link Couplings Assembled Brass (8)

Smiths Standard 3 Link Couplings Assembled Brass Includes: - Four pairs of ready assembled 3 link couplings - Ready to run rolling stock or kits will requires modifications to install - OO Scale Historical information: Classic wagon couplings found on most british railway wagons for the last 150 years.   

Scenecraft Sand Load for 13T Sand Tippler (x4) (OO)

Scenecraft - Sand Load for 13T Sand Tippler (x4) This accessory pack from Scenecraft contains four resin-moulded wagon loads that are designed to represent realistic sand. These loads are suitable for use in the Bachmann Branchline 13 Ton Sand Tippler Wagons. MODEL FEATURES: Highly detailed, hand painted model with new decoration Fully decorated and ready to place in your wagons Dimensions: 30mm (W) x 63.5mm (L) x 9mm (H) - OO Scale

Hornby Low Relief Viaduct with Lock Ups 2 Red Brick

Low Relief Viaduct with Lock Ups 2 Red Brick Part of the model scenery we offer to compliment your train sets, locomotives, coaches and various wagons, our Low Relief Viaduct with Lockups replicates a classic feature of many a model railway. - OO scale

Hornby Vacuum Pipe Magnetic Coupling Pack - 20mm

Vacuum Pipe Magnetic Coupling Pack - 20mm - OO scale

Hornby Vacuum Pipe Magnetic Coupling Pack - 17mm

Vacuum Pipe Magnetic Coupling Pack - 19mm - for OO

Scenecraft Scrap Metal Loads for SSA Wagons (x4) (OO)

Scrap Metal Loads for SSA Wagons (x4) - OO Scale

Hornby Goods Shed (R8002)

Goods Shed Includes - Plastic clip together construction - Sticker finishes include brick or stone for the walls and slate roofing) - Loading gauge to make sure wagons are within gauge of the shed - requires cutting tools (scissors or knife) for some parts NOT included - OO scale