NCE Power Cab DCC Starter Set

NCE Power Cab DCC Starter Set An entire DCC system in the palm of your hand! This 2 Amp system can operate up to 4 OO sized locomotives or 8 N gauge trains. This cab provides all of the capability and ease of use that you’ve heard about in our Power Pro system, at an entry level price. Installation is a snap. Hook two wires to your track and plug in the cab. You’re off and running trains!   The Power Cab kit contains: NCE Power Cab 7' Power Cab Cable PCP Power Panel EU / UK Approved Power Supply Pro Cab Coiled Cord Manual.  

Hornby HM7000: 6 BLE Decoder 6 Pin w/ Fine Wire (No Sound)

HM7000: 6 BLE Decoder 6 Pin w/ Fine Wire (No Sound) Part of the innovative HM7000 range, this new 6-pin Bluetooth® and DCC decoder is designed to get smaller locomotives working on the HM7000 system. The 6-pin connectors are located on the end of flexible wires, giving you more flexibility when installing the decoder in models with limited space. The decoder is designed to supply 1000mA continuous load to the main motor and a peak demand of 1500mA, making it highly suitable for most N scale locos and small TT, HO and OO locomotives. An R7377 Power Bank can be purchased separately and added to this decoder. We recommend for ease you do this during the first install. The Power Bank will keep the loco operating during short power outages when running over dirty track or complex points.

Scale Model Scenery 4ft Fence Posts (pre-drilled) – Laser-cut kit (OO)

4ft Fence Posts (pre-drilled) – Laser-cut kit A pack of 44 laser cut birch plywood fence posts for making your own post and wire fencing. These are the same posts we supply with our LX056-OO Post & Wire Fencing kit, just without the wire! Each post stands approx 16mm tall once installed, and has 4 holes pre-drilled to accept wires. Simply drill a row of 2.5mm holes at approximately 24mm spacing. Glue the posts into place, then thread with your choice of wire, fishing line or thread. The fence posts can then be easily weathered if required using artists acrylics or weathering powders. Features: 44 Laser Cut Birch Plywood fence posts. Sturdy and durable. Perfect for any era OO / 1:76 / 4mm model railway layout or diorama. Compatible with all makes of OO gauge model railway. Supplied with easy to follow instructions, in a cellophane packet. Post Dimensions: D: 1.5mm x W: 1.5mm x H: 16mm (Installed) - OO Scale

Scale Model Scenery 4ft Post & Wire Fencing – Laser-cut kit (OO)

4ft Post & Wire Fencing – Laser-cut kit Post & Wire lineside model railway fencing offers a quick, simple & low cost method for detailing your lineside model railway & diorama scenes. In real life, it's a simple way for farmers to keep livestock away from busy railway lines. Employed all over the UK, for many many years, this easy to install laser cut OO scale kit will look right at home on any model railway layout or diecast diorama. And with real wood fence posts, it looks just the job straight from the packet. Simple to build, making up to 1 metre of fencing from a single pack. Simply drill a row of 2.5mm holes at approximately 24mm spacing. Glue the posts into place, then thread the included wire through the posts and secure with a little glue. The fence posts and wire can then be easily weathered if required using artists acrylics. Features: 44 Laser Cut Birch Plywood model railway fence posts. 4m of stiff wire included - kink resistant for easy installation. Straightforward assembly with step by step instructions. Sturdy and durable. Perfect for any era 1:76 scale model diorama & OO gauge model railway. Compatible with all makes of 1:76 scale model railway accessories Supplied with easy to follow instructions, in a cellophane packet. Post Dimensions: D: 1.5mm x W: 2mm x H: 16mm (Installed) - OO Scale

Hornby Two Way Lever Switch On/Off - Green

Two Way Lever Switch On/Off - Green This two way lever switch in green has a conventional on/off switch for the R618 double-isolating track. It also comes supplied with connecting wires.

DCC Concepts Legacy Wired Joiners Code 100 Rail Pack of 6x Pairs

Legacy Wired Joiners Code 100 Rail Pack of 6x Pairs 300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 100 track from Legacy and equivalent track from all major brands. Super-quick and easy to use – no soldering necessary! Pack contains 6 pairs - OO Scale

DCC Concepts Legacy Wired Rail Joiners Code 75 Track Pack of 6x Pairs

Legacy Wired Rail Joiners Code 75 Track Pack of 6x Pairs 300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 75 track from Legacy and equivalent track from all major brands. Super-quick and easy to use – no soldering necessary! Pack contains 6 pairs - OO Scale

DCC Concepts DCC Decoder Convertor 3 Wire to 2 Wire (3)

DCC Decoder Convertor 3 Wire to 2 Wire (3) Pack of three solenoid decoders. The SDC is a clever wee device that takes the outputs from a 3-wire accessory decoder and turns them into a 2-wire reversing DC decoder, allowing you to use most solenoid accessory decoders to power Kato, Cobalt or other brands of point motor. Available in 6 and 12 packs also.

DCC Concepts Inter-Baseboard Connectors (2 Pack)

Inter-Baseboard Connectors (2 Pack) These clever pluggable screw-terminal connectors allow you to easily connect baseboard power with plug-and-socket connections! Suitable for DC or DCC on systems up to 5 Amps. Includes: - 2x Pluggable Screw-Terminal Connectors - Ferruled Connector Wire - Fixing Screws - Spare Ferrules (will require a crimping tool to use the spares)

DCC Concepts Cobalt Barrel-Plug Adapter (3 Pack)

Cobalt Barrel-Plug Adapter (3 Pack) Includes: A pack of three coaxial DC barrel plug adapters that will let you connect bare wires to a DC-plug fitted power supply that takes away the need to cut the plug off and get the soldering iron out. Suitable for the following DCCconcepts power supplies: - DCP-PS12 - DCP-12.3.XX - DCP-18.2.XX - DCP-18.5.XX

DCC Concepts DCC Decoder Convertor 3 Wire to 2 Wire (3)

DCC Decoder Convertor 3 Wire to 2 Wire (3) - Pack of three solenoid decoders. - The SDC is a clever wee device that takes the outputs from a 3-wire accessory decoder and turns them into a 2-wire reversing DC decoder, allowing you to use most solenoid accessory decoders to power Kato, Cobalt or other brands of point motor. - Please note that for motor drive decoders you will also need to set ‘power on’ time for between 2 and 4 seconds.

Ratio GWR Lineside Fencing - (36 posts with wire)

GWR Lineside Fencing - (36 posts with wire) - plastic kit - OO scale