Dapol Bulk Grain Hopper BR B885327 (N)

Dapol Bulk Grain Hopper BR B885327 (N) 1:148 Scale Model Metal Wheels Highly Detailed Body and Chassis Design Pristine Paint Finish

Dapol Bulk Grain Hopper LMS 700366 (N)

Dapol Bulk Grain Hopper LMS 700366 (N) 1:148 Scale Model Metal Wheels Highly Detailed Body and Chassis Design Pristine Paint Finish

Accurascale BR Mk2C FK M13520 Blue/Grey InterCity (OO)

BR Mk2C FK M13520 Blue/Grey InterCity (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C FK M13527 Provincial Trans-Pennine (OO)

BR Mk2C FK M13527 Provincial Trans-Pennine (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5505 Regional Railways (OO)

BR Mk2C TSO 5505 Regional Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5520 Provincial (Unbranded) (OO)

BR Mk2C TSO 5520 Provincial (Unbranded) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5525 Network SouthEast (OO)

BR Mk2C TSO 5525 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5569 Maroon (South Wales & West) (OO)

BR Mk2C TSO 5569 Maroon (South Wales & West) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO M5561 Blue/Grey InterCity (OO)

BR Mk2C TSO M5561 Blue/Grey InterCity (OO)Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) 6501 Network SouthEast (OO)

BR Mk2C TSO(T) 6501 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO)

BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C FK 13514 Network SouthEast (OO)

BR Mk2C FK 13514 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BFK 17120 Network SouthEast w/ WoE Route Branding (OO)

BR Mk2C BFK 17120 Network SouthEast w/ WoE Route Branding (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BFK IC17177C InterCity Executive (OO)

BR Mk2C BFK IC17177C InterCity Executive (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSK (exBFK) 35506 Regional Railways (OO)

BR Mk2C BSK (exBFK) 35506 Regional Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSK (exBFK) 35508 West Coast Railways (OO)

BR Mk2C BSK (exBFK) 35508 West Coast Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSO 9440 South Wales & West Blue (OO)

BR Mk2C BSO 9440 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5453 South Wales & West Blue (OO)

BR Mk2B TSO 5453 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5463 Maroon (South Wales & West) (OO)

BR Mk2B TSO 5463 Maroon (South Wales & West) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5491 South Wales & West Blue (OO)

BR Mk2B TSO 5491 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Scenecraft Toilet Block (N)

Toilet Block This Scenecraft Toilet Block lets you provide your miniature world with the basic amenities that any visitor to a town, village or tourist destination might expect to find. The quaint structure provides both males and females with public conveniences and is suitable for many different settings, from car parks to camp sites and beaches to bus stations. The embossed stonework is enhanced by etched windows, signage and green foliage at the front providing a warm welcome for those hoping not to be caught short. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting! - N scale

Scenecraft Straight Pavements (x4) (N)

Straight Pavements (x4) Scenecraft helps you create any scene or diorama with buildings, structures and accessories that are fully finished and ready to place on your layout. This set of Straight Pavements includes four pieces that are each engraved with flag and kerbstone detail. Ideal for use with the Corner Pavements & Drop Kerbs (item No. 42-564) to create a convincing street scene or combine multiple packs for larger scenes! MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Pack includes 4 Straight pieces - N Scale

Scenecraft Nissen Hut - (N)

Nissen Hut Prefabricated ‘Nissen Huts’ were the brainchild of American-born, Canadian-British inventor and engineer Major Peter Norman Nissen who developed the design during World War One. Deployed extensively during both World Wars, these half cylindrical huts were made of corrugated steel sheets fixed to a metal frame and could provide accommodation for troops, prisoners of war and civilians – indeed many were used for temporary housing following the Second World War. With examples still in existence across the UK – many having been given a new lease of life as business premises and recreational spaces to name just two – this model can be justified in any scene set from the First World War to the present day. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - N Scale

Scenecraft Pent Roof Garden Shed (N)

Scenecraft Pent Roof Garden Shed Garden sheds are a timeless feature of British gardens and with our Pent Roof Garden Shed your N scale gardens can boast one (or more!) too. Featuring traditional feather edge timber cladding and a dark green door with gold lock and handle to keep the riff raff out, this model is ready to be placed into any scene straight out of the box. We are sure this will make a wonderful addition to a garden or allotment scene on any N scale layout or diorama. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - N scale

Scenecraft Low Relief Bank (N)

Scenecraft Low Relief Bank Your money will be as safe as houses in this little N scale bank, comprised of an embossed Victorian stone façade on the lower floor leading up to a brick upper storey. With glazed windows and guttering and drainpipe detail, this model is ready to be placed onto your layout right out of the box, and we’re sure this will make a wonderful addition to a street scene on any N scale layout or diorama. MODEL FEATURES: Low Relief Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting! - N scale

Scenecraft Fibre Board Hut (N)

Fibre Board Hut The lineside was once full of huts like this Fibre Board Hut which provided permanent way workers with a place to rest and shelter from the elements. Nowadays, some can still be found in various states of disrepair and often they are out of use or overrun with vegetation. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - N Scale

Scenecraft Corner Pavements and Drop Kerbs (N)

Scenecraft Corner Pavements and Drop Kerbs Scenecraft helps you create any scene or diorama with buildings, structures and accessories that are fully finished and ready to place on your layout. This set of Corner Pavements and Drop Kerbs includes four corners and two drop kerbs and piece is engraved with flag and kerbstone detail. Ideal for use with the Straight Pavements (item No. 42-563) to create a convincing street scene or combine multiple packs for larger scenes! MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Pack includes 4 Corners and 2 Drop Kerbs - N scale

Scenecraft Corrugated Metal Shed (N)

Corrugated Metal Shed Corrugated Metal Sheds are a common sight in any location where storage is required, allowing this versatile model to be placed lineside and in yards, or away from the railway where it would be equally well suited next to allotments, in gardens, or several other places on your layout. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting! - N Scale

Scenecraft 6ft Victorian Wall Sections (x4) (N)

6ft Victorian Wall Sections (x4) Scenecraft helps you create any scene or diorama with buildings, structures and accessories that are fully finished and ready to place on your layout. Red brick walling can be found by the mile in every part of the UK and the Victorians built impressive 6 foot high walls to provide privacy and security. This pack of walling includes four pieces that can be positioned in various configurations to suit your needs and each section boasts embossed brickwork with authentic decoration. Combine two or more packs for more variety and larger scenes! MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Pack includes 4 wall pieces - N Scale

Scenecraft Street Lamps (x4) (OO)

Street Lamps (x4) Scenecraft helps you create any scene or diorama with buildings, structures and accessories that are fully finished and ready to place on your layout. No street scene is complete without street lights so once you have arranged your buildings – whether full buildings or low relief – add these Street Lamps to provide light to your miniature inhabitants on those dark nights (*lamps do not illuminate). MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Pack of 4 - OO scale

Scenecraft Milk Churns (x10) (OO)

Milk Churns (x10) MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Pack of 10 - OO scale

Scenecraft Midland Water Crane (Platform Mounted) (OO)

Midland Water Crane (Platform Mounted) Steam locomotives can only produce steam if they have water, so the railway network was awash with water towers, tanks and cranes during the steam age. Whilst many locomotives would take water on shed or whilst stabled between duties, some stations boasted Water Cranes mounted at the ends of platforms allowing locomotives to top up during station stops with little or no disruption to services. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - OO scale

Scenecraft Grit Boxes (x4) (OO)

Grit Boxes (x4) fully finished and ready to place on your layout. Grit Boxes are found roadside across the UK and particularly in hilly areas where snow and ice might cause havoc and so these innocuous boxes sit loaded with grit and waiting to help. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Pack of 4 - OO scale

Scenecraft Fibre Board Hut (OO)

Fibre Board Hut The lineside was once full of huts like this Fibre Board Hut which provided permanent way workers with a place to rest and shelter from the elements. Nowadays, some can still be found in various states of disrepair and often out of use or overrun with vegetation. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout   - OO scale

Hornby LB&SCR 6 Wheel Third Class Brake Coach 106

LB&SCR 6 Wheel Third Class Brake Coach 106 This charming LB&SCR 6-Wheel 3rd Class Brake Coach No. 106 looks incredible in its London Brighton & South Coast Railway Lined brown livery. The distinctive 6-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s.  Perfect for pairing with the delightful A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 6-wheel 3rd Class Brake Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory pack Livery: LBSCR Lined Brown Gold lettering Painted red seating - OO Scale

Hornby LB&SCR 6 Wheel Third Class Coach 612

LB&SCR 6 Wheel Third Class Coach 612 This charming LB&SCR 6-Wheel 3rd Class Coach No. 612 looks incredible in its London Brighton & South Coast Railway Lined brown livery. The distinctive 6-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s.  Perfect for pairing with the delightful A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 6-wheel 3rd Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory pack Livery: LBSCR Lined Brown Gold lettering Painted red seating - OO Scale

Hornby LB&SCR 6 Wheel First Class Coach 452

LB&SCR 6 Wheel First Class Coach 452 This charming LB&SCR 6-Wheel 1st Class Coach No. 452 looks incredible in its London Brighton & South Coast Railway Lined brown livery. The distinctive 6-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s.  Perfect for pairing with the delightful A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 6-wheel 1st Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory pack Livery: LBSCR Lined Brown Gold lettering Painted blue seating - OO Scale  

Hornby BR Mk1 TSO 4914 Network South East

BR Mk1 TSO 4914 Network South East The British Railways Mark 1 coach family includes some of the most successful designs in railway history, with thousands constructed and lasting from the early 50’s right up until the present day. In the blue, white and red livery of NSE, this Tourist Second Open No. 4914 is the perfect accompaniment for 1980s and 1990s British diesel locomotives! Model Specification: Highly detailed model of Mk1 Tourist Second Open Defined bogie mouldings Detailed roof and underframe Moulded and painted interior Kinematic NEM coupling mechanism Accessory pack Livery: Network Southeast Crisp paint application using accurate colours and fonts - OO Scale

Hornby BR Mk1 BSK 35010 Network South East

BR Mk1 BSK 35010 Network South East The British Railways Mark 1 coach family includes some of the most successful designs in railway history, with thousands constructed and lasting from the early 50’s right up until the present day. In the blue, white and red livery of NSE, this Brake Second Corridor No. 35010 is the perfect accompaniment for 1980s and 1990s British diesel locomotives! Model Specification: Highly detailed model of Mk1 Brake Standard Corridor Defined bogie mouldings Detailed roof and underframe Moulded and painted interior Kinematic NEM coupling mechanism Accessory pack Livery: Network Southeast Crisp paint application using accurate colours and fonts - OO Scale

Hornby RailRoad: TEA 100T Tanker Esso BRT 20060

RailRoad: TEA 100T Tanker Esso BRT 20060 Being a Railroad product, this TEA tanker painted in all over grey and red with Esso and BRT brandings is a durable, free-running wagon perfect for those looking to bolster their wagon fleet at an affordable price - OO Scale

Hornby BR Tavern Coach Pack ‘At the Sign of the Dolphin’

BR Tavern Coach Pack ‘At the Sign of the Dolphin’ This expertly detailed and colourful Southern Region Tavern Car twin pack offers modellers a unique set of restaurant cars, which feature intricate paint and print application, crisply moulded details, and interior lighting. This latest release includes Tavern Car No. S7894 and Composite Saloon No. S7835, and both are decorated in Crimson & Cream livery and named ‘At the Sign of the Dolphin’. Model Specification: Highly detailed models of KB and RCO Tavern Cars Defined bogie mouldings Detailed roof mouldings Separately fitted underframe and gangway end equipment Moulded interior Interior Lighting Kinematic NEM coupling mechanism Accessory Pack Tooling: Original condition Tavern Car without side beading Original condition Composite Saloon with high windows and without side beading Livery: BR Crimson & Cream Faux-pub exterior painted on Tavern Car Accurate colours and fonts - OO Scale  

Hornby RailRoad: Peppercorn A1 60163 'Tornado' BR Lined Apple Green

RailRoad: Peppercorn A1 60163 'Tornado' BR Lined Apple Green Peppercorn A1 60163 ‘Tornado’, a true icon of the current railway scene, rejoins the RailRoad range in a new livery scheme: Apple Green with British Railway tender lettering. Designed to be robust this RailRoad model features fully working piston and connecting rods, accurate paint application and DCC capability. Model Specification: RailRoad specification Peppercorn A1 Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: 21-pin DCC decoder socket compatible with HM7000 system Livery: British Railways lined apple green Modern warning flashes - OO Scale  

Hornby RailRoad: Peppercorn A1 60163 ‘Tornado’ BR Apple Green (Sound)

RailRoad: Peppercorn A1 60163 ‘Tornado’ BR Lined Apple Green (Sound Fitted) Peppercorn A1 60163 ‘Tornado’, a true icon of the current railway scene, rejoins the RailRoad range in a new livery scheme: Apple Green with British Railway tender lettering. Designed to be robust this RailRoad model features fully working piston and connecting rods, accurate paint application and DCC capability. Model Specification: RailRoad specification Peppercorn A1 Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius DCC Sound: Pre fitted 21-pin DCC Sound decoder, compatible with HMRA compliant systems and HM7000 High fidelity sound profile assembled from recordings of 60163 Tornado Livery: British Railways lined apple green Modern warning flashes - OO Scale  

Hornby RailRoad: Fowler 3F Jinty 16440 LMS Lined Crimson

RailRoad: Fowler 3F Jinty 16440 LMS Lined Crimson Wearing the vibrant lined crimson livery of the LMS, this RailRoad Fowler 3F Jinty numbered 16440 in preservation condition is perfect for all your shunting needs, regardless of the setting! This 0-6-0 tank locomotive has working running gear and a neatly applied paint scheme. Model Specification: RailRoad specification LMS 3F Jinty Moulded details Working connector rods NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: Analogue Livery: LMS lined crimson as preserved Accurate colours and fonts - OO Scale

Hornby A1X 'Terrier' 643 LB&SCR Marsh Brown

A1X 'Terrier' 643 LB&SCR Marsh Brown The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.643 in London Brighton & South Coast Railway Marsh Brown. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes Small cab bunker with no coal rails Westinghouse pump Livery: LB&SCR Marsh Brown Accurate colours and typefaces - OO Scale

Hornby A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company

A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.72 ‘Fenchurch’ in Newhaven Harbour Company lined black. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Rivetted smokebox door Six lamp brackets on front and rear  Low bufferstock with lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump Livery: Newhaven Harbour Company lined black Accurate colours and typefaces - OO Scale

Rapido UK LNER C12 Tank No.1517N LNER Lined Black

LNER C12 Tank No.1517N LNER Lined Black LNER C12 4-4-2 Tank No.1517n LNER Plain Black Short chimney and dome As-built safety valves Round tank edges Tapered buffers Destination plate hangers on smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.1519 L&NER Lined Black

LNER C12 Tank No.1519 L&NER Lined Black LNER C12 4-4-2 Tank No.1519 LNER Lined Black Short chimney and dome As-built safety valves Round tank edges Tapered buffers Plain smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.4009A LNER Plain Black

LNER C12 Tank No.4009A LNER Plain Black LNER C12 4-4-2 Tank No.4009A LNER Plain Black Tall chimney and dome Ross Pop safety valves Square tank edges Parallel buffers Handrail on smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.4010 NE Wartime Black

LNER C12 Tank No.4010 NE Wartime Black LNER C12 4-4-2 Tank No.4010 LNER Plain Black Tall chimney and dome Ross Pop dafety valves Square tank edges Parallel buffers Plain smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.4502 LNER Lined Black

LNER C12 Tank No.4502 LNER Lined Black LNER C12 4-4-2 Tank No.4502 LNER Lined Black Short chimney and dome Ross Pop safety valves Round tank edges Parallel buffers Plain smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.67352 BR Lined Black (Late)

LNER C12 Tank No.67352 BR Lined Black (Late) LNER C12 4-4-2 Tank No.67352 BR Lined Late Crest Short chimney and dome Ross Pop safety valves Square tank edges Parallel buffers Numberplate on smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.67356 British Railways Black

LNER C12 Tank No.67356 British Railways Black LNER C12 4-4-2 Tank No.67356 British Railways Tall chimney and dome Ross Pop safety valves Square tank edges Parallel buffers Numberplate on smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.67380 BR Lined Black (Early)

LNER C12 Tank No.67380 BR Lined Black (Early) LNER C12 4-4-2 Tank No.67380 BR Lined Early Crest Short chimney and dome Ross Pop safety valves Round tank edges Parallel buffers Numberplate on smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK LNER C12 Tank No.67391 BR Lined Black (Early)

LNER C12 Tank No.67391 BR Lined Black (Early) LNER C12 4-4-2 Tank No.67391 BR Lined Early Crest Short chimney and dome Ross Pop safety valves Round tank edges Parallel buffers Numberplate on smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK HR ‘Jones Goods’ HR Yellow No. 103 (1960s condition)

HR ‘Jones Goods’ HR Yellow No. 103 (1960s condition) Highland Railway ‘Jones Goods’ 4-6-0 HR Yellow No. 103 (1960s condition) Short smokebox door straps Smokebox wing plates Louvre chimney Short tender tank with toolbox Original style safety valve 21-pin decoder socket Sprung buffers Museum quality paint finish Factory-fitted sound speaker Smooth & powerful mechanism MoPower Stay Alive included Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GNR C2 Tank No.1020 GNR Lined Green

GNR C2 Tank No.1020 GNR Lined Green GNR C2 4-4-2 Tank No.1020 GNR Lined Green Tall chimney and dome As-built safety valves Square tank edges Parallel buffers Plain smokebox door And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GNR C2 Tank No.1511 GNR Grey

GNR C2 Tank No.1511 GNR Grey GNR C2 4-4-2 Tank No.1511 GNR Grey Short chimney and dome As-built safety valves Round tank edges Tapered buffers Destination plate hangers on smokebox door Condensing pipes And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge

Rapido UK GNR C2 Tank No.1528 GNR Lined Green

GNR C2 Tank No.1528 GNR Lined Green GNR C2 4-4-2 Tank No.1528 GNR Lined Green Short chimney and dome As-built safety valves Round tank edges Parallel buffers Destination plate hangers on smokebox door Condensing pipes And many more variant parts Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker E24 DCC decoder socket MoPower stay-alive capacitors Factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK HR Loch Class No.119 ‘Loch Insh’ HR Drummond Lined Green

HR Loch Class No.119 ‘Loch Insh’ HR Drummond Lined Green Highland Railway ‘Loch’ Class 4-4-0 HR Drummond I Lined Green No. 119 ‘Loch Insh’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.120 ‘Loch Ness’ HR Drummond Lined Green

HR Loch Class No.120 ‘Loch Ness’ HR Drummond Lined Green Highland Railway ‘Loch’ Class 4-4-0 HR Drummond I Lined Green No. 120 ‘Loch Ness’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.120 ‘Loch Ness’ HR Drummond Lined Green (SF)

HR Loch Class No.120 ‘Loch Ness’ HR Drummond Lined Green (Sound Fitted) Highland Railway ‘Loch’ Class 4-4-0 HR Drummond I Lined Green No. 120 ‘Loch Ness’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.125 ‘Loch Tay’ HR Jones Lined Green

HR Loch Class No.125 ‘Loch Tay’ HR Jones Lined Green Highland Railway ‘Loch’ Class 4-4-0 HR Jones Lined Green No. 125 ‘Loch Tay’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.14383 ‘Loch An Dorb’ LMS Lined Red

HR Loch Class No.14383 ‘Loch An Dorb’ LMS Lined Red Highland Railway ‘Loch’ Class 4-4-0 LMS Lined Red No. 14383 ‘Loch an Dorb’ Tall louvred HR chimney Caledonian style smokebox door Smokebox wing plates Jones safety valves Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.14384 ‘Loch Laggan’ LMS Lined Black

HR Loch Class No.14384 ‘Loch Laggan’ LMS Lined Black Highland Railway ‘Loch’ Class 4-4-0 LMS Lined Black No. 14384 ‘Loch Laggan’ Short louvred HR chimney Short smokebox door straps Smokebox without wing plates Ross pop safety valves Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.14384 ‘Loch Laggan’ LMS Lined Black (SF)

HR Loch Class No.14384 ‘Loch Laggan’ LMS Lined Black (Sound Fitted) Highland Railway ‘Loch’ Class 4-4-0 LMS Lined Black No. 14384 ‘Loch Laggan’ Short louvred HR chimney Short smokebox door straps Smokebox without wing plates Ross pop safety valves Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.150 ‘Loch Eye’ ‘What If’ HR Lined Yellow

HR Loch Class No.150 ‘Loch Eye’ ‘What If’ HR Lined Yellow Highland Railway ‘Loch’ Class 4-4-0 ‘What If’ HR Lined Yellow No. 150 ‘Loch Eye’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK GWR County No.1019 'County of Merioneth' BR Lined Black (Early)

GWR County No.1019 'County of Merioneth' BR Lined Black (Early) GWR Class 1000 ‘County’ 1019 “County of Merioneth” in BR Lined Black (Early Crest) Red backed number & name plates Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1017 'County of Hereford' BR Lined Green(Egyptian)

GWR County No.1017 'County of Hereford' BR Lined Green (Egyptian) GWR Class 1000 ‘County’ 1017 “County of Hereford” in BR (Egyptian) Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1000 'County of Middlesex' BR Lined Green (Late)

GWR County No.1000 'County of Middlesex' BR Lined Green (Late) GWR Class 1000 ‘County’ 1000 “County of Middlesex” in BR Lined Green (Late Crest) Double Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1001 G.W. Lined Green

GWR County No.1001 G.W. Lined Green GWR Class 1000 ‘County’ 1001 in GW Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1001 G.W. Lined Green (SF)

GWR County No.1001 G.W. Lined Green (Sound Fitted) GWR Class 1000 ‘County’ 1001 in GW Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1005 'County of Devon' G.W. Lined Green

GWR County No.1005 'County of Devon' G.W. Lined Green GWR Class 1000 ‘County’ 1005 “County of Devon” in GW Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1006 'County of Cornwall' BR Lined Green (Early)

GWR County No.1006 'County of Cornwall' BR Lined Green (Early) GWR Class 1000 ‘County’ 1006 “County of Cornwall” in BR Lined Green (Early Crest) Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1011 'County of Chester' BR Lined Green (Late)

GWR County No.1011 'County of Chester' BR Lined Green (Late) GWR Class 1000 ‘County’ 1011 “County of Chester” in BR Lined Green (Late Crest) GWR number on front bufferbeam, smokebox door plates removed Double Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1011 'County of Chester' BR Lined Green (Late)(SF)

GWR County No.1011 'County of Chester' BR Lined Green (Late) (Sound Fitted) GWR Class 1000 ‘County’ 1011 “County of Chester” in BR Lined Green (Late Crest) GWR number on front bufferbeam, smokebox door plates removed Double Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1013 'County of Dorset' BR Lined Black (Early)

GWR County No.1013 'County of Dorset' BR Lined Black (Early) GWR Class 1000 ‘County’ 1013 “County of Dorset” in BR Lined Black (Early Crest) Black backed number & name plates Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1013 'County of Dorset' BR Lined Black (Early)(SF)

GWR County No.1013 'County of Dorset' BR Lined Black (Early) (Sound Fitted) GWR Class 1000 ‘County’ 1013 “County of Dorset” in BR Lined Black (Early Crest) Black backed number & name plates Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1017 'County of Hereford' BR Lined Green (SF)

GWR County No.1017 'County of Hereford' BR Lined Green (Egyptian) (Sound Fitted) GWR Class 1000 ‘County’ 1017 “County of Hereford” in BR (Egyptian) Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Accurascale Class 50 50035 'Ark Royal' BR Blue (SF)

Class 50 50035 'Ark Royal' BR Blue (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof

Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof (SF)

Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50029 'Renown' Revised NSE w/WofE Branding

Class 50 50029 'Renown' Revised NSE w/WofE Branding Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50029 'Renown' Revised NSE w/WofE Branding (SF)

Class 50 50029 'Renown' Revised NSE w/WofE Branding (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50035 'Ark Royal' BR Blue

Class 50 50035 'Ark Royal' BR Blue Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50019 'Ramillies' BR Laira Departmental Blue

Class 50 50019 'Ramillies' BR Laira Departmental Blue Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50019 'Ramillies' BR Laira Departmental Blue (SF)

Class 50 50019 'Ramillies' BR Laira Departmental Blue (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Bachmann LMS Ivatt 2MT 46464 BR Lined Black (Early) (Preserved)

LMS Ivatt 2MT 46464 BR Lined Black (Early) (Preserved)  Ivatt’s 2MT ‘Mogul’ 2-6-0 Tender Locomotives were popular, go-anywhere engines which served the LMS and BR for two decades and across a wide area, making this Bachmann Branchline model a great choice for many modellers wishing to depict the steam age or preservation, as the type remains strongly represented today. The Branchline model of Ivatt’s 2-6-0 mogul employs a diecast running plate and locomotive chassis to provide an impressive weight, ensuring that the model’s performance matches that of the prototype. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails and lamp irons to the safety valves, whistle and sprung buffers, each of which are turned brass. Further details are added individually like the lubricators and sand boxes adorning the running plate and the brake blocks, brake rigging and metal wire sandpipes mounted to the chassis. Within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. Moving to the tender and two lengths of locomotive to tender drawbar are provided to suit different layout conditions whilst the tender itself is finely moulded, with several separately applied details including the lamp irons, handrails, handwheels and sprung metal buffers. A realistic coal load is included, with the empty coal space modelled below, whilst the tender chassis includes brake rigging and the water scoop. The livery application is executed to the highest standard with the rich, uniform paintwork enhanced by the three-colour lining, emulating the BR lined black livery to full effect. Numbering, lettering and the BR Early Emblem is reproduced in high definition, resulting in a model fit for any collection. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Locomotive is Preserved Pristine BR Lined Black (Early Emblem) livery Running No. 46464 Long Tender Ladder and Fabricated Cab Footsteps Two lengths of Tender Drawbar Supplied Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 8 Pin DCC Decoder Socket – Recommend Decoder item No. 36-566A Length 226mm (over couplings) IVATT 2MT HISTORY Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network. With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today.

Bachmann LMS Ivatt 2MT 46521 BR Lined Green (Early) (Preserved)

LMS Ivatt 2MT 46521 BR Lined Green (Early) (Preserved) Ivatt’s 2MT ‘Mogul’ 2-6-0 Tender Locomotives were popular, go-anywhere engines which served the LMS and BR for two decades and across a wide area, making this Bachmann Branchline model a great choice for many modellers wishing to depict the steam age or preservation, as the type remains strongly represented today. The Branchline model of Ivatt’s 2-6-0 mogul employs a diecast running plate and locomotive chassis to provide an impressive weight, ensuring that the model’s performance matches that of the prototype. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails and lamp irons to the safety valves, whistle and sprung buffers, each of which are turned brass. Further details are added individually like the lubricators and sand boxes adorning the running plate and the brake blocks, brake rigging and metal wire sandpipes mounted to the chassis. Within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. Moving to the tender and two lengths of locomotive to tender drawbar are provided to suit different layout conditions whilst the tender itself is finely moulded, with several separately applied details including the lamp irons, handrails, handwheels and sprung metal buffers. A realistic coal load is included, with the empty coal space modelled below, whilst the tender chassis includes brake rigging and the water scoop. The livery application is executed to the highest standard with the rich, uniform paintwork enhanced by the black and orange lining, emulating the BR lined green livery to full effect. Numbering, lettering and the BR Early Emblem is reproduced in high definition, resulting in a model fit for any collection.   MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Locomotive is Preserved Pristine BR Lined Green (Early Emblem) livery Running No. 46521 Short Tender Ladder and Oval Cab Footsteps Two lengths of Tender Drawbar Supplied Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 8 Pin DCC Decoder Socket – Recommend Decoder item No. 36-566A Length 226mm (over couplings) IVATT 2MT HISTORY Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network. With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today.

Bachmann LMS Ivatt 2MT 46447 BR Lined Black (Late) (Preserved)

LMS Ivatt 2MT 46447 BR Lined Black (Late) (Preserved) LMS Ivatt 2MT 46447 BIvatt’s 2MT ‘Mogul’ 2-6-0 Tender Locomotives were popular, go-anywhere engines which served the LMS and BR for two decades and across a wide area, making this Bachmann Branchline model a great choice for many modellers wishing to depict the steam age or preservation, as the type remains strongly represented today. The Branchline model of Ivatt’s 2-6-0 mogul employs a diecast running plate and locomotive chassis to provide an impressive weight, ensuring that the model’s performance matches that of the prototype. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails and lamp irons to the safety valves, whistle and sprung buffers, each of which are turned brass. Further details are added individually like the lubricators and sand boxes adorning the running plate and the brake blocks, brake rigging and metal wire sandpipes mounted to the chassis. Within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. Moving to the tender and two lengths of locomotive to tender drawbar are provided to suit different layout conditions whilst the tender itself is finely moulded, with several separately applied details including the lamp irons, handrails, handwheels and sprung metal buffers. A realistic coal load is included, with the empty coal space modelled below, whilst the tender chassis includes brake rigging and the water scoop. The livery application is executed to the highest standard with the rich, uniform paintwork enhanced by the three-colour lining, emulating the BR lined black livery to full effect. Numbering, lettering and the BR Late Crest is reproduced in high definition, resulting in a model fit for any collection.   MODEL FEATURES: Bachmann Branchline OO Scale Era 5 Locomotive is Preserved Pristine BR Lined Black (Late Crest) livery Running No. 46447 Long Tender Ladder and Oval Cab Footsteps Two lengths of Tender Drawbar Supplied Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 8 Pin DCC Decoder Socket – Recommend Decoder item No. 36-566A Length 226mm (over couplings)     IVATT 2MT HISTORY   Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network.   With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today. BR Lined Black (Late) (Preserved)

Hornby Country Cottage (TT)

Country Cottage  The TT:120 scale range of scenic items gains its first residential building in this year's April announcements, in the form of the charming Country Cottage.  Typical of a dwelling nestled along a country lane, this half render/half brick cottage is highly detailed, comes pre-painted, and is fitted with separate glazed windows and gutter piping. It would be well suited for a number of TT layout styles, regardless of time period or location. - TT:120 Scale

Hornby YGB Seacow Civil Engineers "Dutch" 980100 (TT)

YGB Seacow Civil Engineers "Dutch" 980100 Civil Engineers YGB Seacow Wagon 980100 is a newly tooled model with a 'Dutch' Grey and Yellow livery. Featuring intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell, it carries number DB980100.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: ‘Dutch’ Grey and Yellow Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGH Sealion Civil Engineers "Dutch" 982838 (TT)

YGH Sealion Civil Engineers "Dutch" 982838 This model is an accurate depiction of Civil Engineers 982838 YGH Sealion Wagon, in its 'Dutch' Grey and Yellow livery. It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius Livery: ‘Dutch’ Grey and Yellow Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGH Sealion Departmental Olive 982786, 982788, & 982791 (TT)

YGH Sealion Departmental Olive Green 982786, 982788, & 982791 Triple Pack The newly tooled Civil Engineers YGH Sealion Wagon Triple Pack depicts numbers DB982786, DB982788, and DB982791 in Departmental Olive Green.  They feature intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision-moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: Departmental Olive Green Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGH Sealion Departmental Olive Green 982792 (TT)

YGH Sealion Departmental Olive Green 982792 In the elegant Departmental Olive Green livery, this Civil Engineers YGH Sealion Wagon is a newly tooled delight. It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: Departmental Olive Green Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGA Seacow EWS 980076 (TT)

YGA Seacow EWS 980076  This newly tool EWS YGA Seacow Wagon 980076 displays a striking maroon livery. It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: EWS Maroon Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGB Seacow Civil Engineers "Dutch" 980062, 980049, & 980074 (TT)

YGB Seacow Civil Engineers "Dutch" 980062, 980049, & 980074 Triple Pack  This newly tooled Civil Engineers YGB Seacow Wagon Triple Pack includes numbers DB980062, DB980049, and DB980074 in a stylish Grey and Yellow livery.  It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision-moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius Livery: Civil Engineers ‘Dutch’ Grey & Yellow Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby HAA Hopper Trainload Coal Sector 350412 (TT)

HAA Hopper Trainload Coal Sector 350412 The HAA ‘Merry Go Round’ coal hopper wagon rejoins the TT:120 range as part of the April launch announcement, in the popular Trainload Freight Coal Sector yellow livery of the 1980s and 90s.  This highly detailed and colourful hopper wagon has been expertly researched and captures the angular look of the HAA well. With a wealth of separately fitted parts, crisp paint application, die-cast weight and kinematic NEM couplings, this modern image wagon will not only look good on your layout, it will run smoothly too! TT6093 depicts No.350412 HAA coal hopper wagon in TLF Coal Sector livery. Model Specification: Extensively researched model of HAA coal hopper wagon Highly detailed Separate parts including hand brake, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius Livery: TLF Coal Sector yellow and silver ‘Barry’ pool markings Accurate colours and fonts Semi-gloss finish - TT:120 Scale

Hornby HAA Hopper Trainload Coal Sector 350428, 350472, & 350468 (TT)

HAA Hopper Trainload Coal Sector 350428, 350472, & 350468 Triple Pack  The HAA ‘Merry Go Round’ coal hopper wagon rejoins the TT:120 range as part of the April launch announcement, in the popular Trainload Freight Coal Sector yellow livery of the 1980s and 90s.  This highly detailed and colourful hopper wagon has been expertly researched and captures the angular look of the HAA well. With a wealth of separately fitted parts, crisp paint application, die-cast weight and kinematic NEM couplings, this modern image wagon will not only look good on your layout, it will run smoothly too! TT6094 is a triple pack and depicts No.350428, 350472, and 350468 HAA coal hopper wagons in TLF Coal Sector livery. Model Specification: Extensively researched models of HAA coal hopper wagon Highly detailed Separate parts including hand brake, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius Livery: TLF Coal Sector yellow and silver ‘Barry’ pool markings Accurate colours and fonts Semi-gloss finish - TT:120 Scale

Hornby CDA Hopper EWS 375071 (TT)

CDA Hopper EWS 375071 The CDA China clay hopper wagon model rejoins the TT:120 range in the long lasting EWS silver and maroon livery of the 2000s.  This highly detailed and colourful hopper wagon has been expertly researched and captures the unique look of the CDA well. With a wealth of separately fitted parts, crisp paint application, die-cast weight and kinematic NEM couplings, this modern image wagon will not only look good on your layout, it will run smoothly too! This model depicts No.375071 CDA Hopper Wagon in EWS maroon and silver livery. Model Specification: Extensively researched model of CDA China clay hopper wagon Highly detailed Separate parts including hand brake, canvas roof, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Livery: EWS maroon and silver St Blazey depot plaques Accurate colours and fonts Semi-gloss finish - TT:120 Scale

Hornby CDA Hopper EWS 375072, 375073, & 375074 Triple Pack (TT)

CDA Hopper EWS 375072, 375073, & 375074 Triple Pack The CDA China clay hopper wagon rejoins the TT:120 range in the long lasting EWS silver and maroon livery of the 2000s.  This highly detailed and colourful hopper wagon triple pack has been expertly researched and captures the unique look of the CDA well. With a wealth of separately fitted parts, crisp paint application, die-cast weight and kinematic NEM couplings, these modern image wagons will not only look good on your layout, they will run smoothly too! This triple pack includes No.375072, No.375073, and No.375074 CDA hopper wagon models in EWS maroon and silver livery. Model Specification: Extensively researched model of CDA China clay hopper wagon Highly detailed Separate parts including hand brake, canvas roof, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Livery: EWS maroon and silver St Blazey depot plaques Accurate colours and fonts Semi-gloss finish - TT:120 Scale

Hornby 12T Tank Power Petroleum Silver 115 (TT)

12T Tank Power Petroleum Silver 115 This Power Petroleum 12T Tank Wagon 115 model is presented in the silver ‘Power’ livery from the early 20th century.  Bulk liquid in various forms such as petroleum, oil, and chemicals transported via wagons have been a perennial feature of British Railways, with a multitude of privately owned companies owning fleets of tanker wagons brandished in their own paint schemes.  Power Petroleum Company, formed in 1923 for the distribution of imported Russian oil, was no different, painting their wagons silver with green lettering. Model Specification: Detailed model of 12T Tank wagon Rivetted tank design Separately fitted parts such as retaining wires and underframe equipment Tiebar between axle boxes Kinematic NEM couplings Minimum 2nd radius, but capable of traversing 1st radius. Livery: Power Petroleum Silver Accurate livery colours and typefaces - TT:120 Scale

Hornby 12T Tank Power Petroleum Silver 118, 119 & 120 Triple Pack (TT)

12T Tank Power Petroleum Silver 118, 119 & 120 Triple Pack  Get three lots of silver power in this Power Petroleum 12T Tank Wagon Triple Pack, with models numbered 118, 119 and 120. They represent wagons from the early 20th century.  Bulk liquid in various forms such as petroleum, oil, and chemicals transported via wagons have been a perennial feature of British Railways, with a multitude of privately owned companies owning fleets of tanker wagons brandished in their own paint schemes.  Power Petroleum Company, formed in 1923 for the distribution of imported Russian oil, was no different, painting their wagons silver with green lettering. Model Specification: Detailed models of 12T Tank wagon Rivetted tank design Separately fitted parts such as retaining wires and underframe equipment Tiebar between axle boxes Kinematic NEM couplings Minimum 2nd radius, but capable of traversing 1st radius. Livery: Power Petroleum silver Accurate livery colours and typefaces - TT:120 Scale

Hornby 12T Vent Van Banana Van Bauxite ‘Fyffes’ B880681 (TT)

12T Vent Van Banana Van Bauxite ‘Fyffes’ B880681 The Hornby TT:120 model is a faithful rendition of a useful little covered van, with intricate planking detail, separately fitted brake equipment, and a crisp paint application. The covered ventilated van was an extremely common sight across the country during the time of the ‘Big Four’ and early British Railways, with each of the four and BR themselves building thousands to various designs with the intention that they would carry all manner of goods – from canned food and bananas to cement and fertiliser.  TT6068 is an example of a Ventilated Van in Bauxite Brown livery, adorned with ‘Fyffes’ labels and ‘Banana’ marking, numbered B880681. Model Specification: Crisp plank detailing Detailed underframe Separately fitted brake equipment Kinematic NEM couplings Recommended for use on 2nd radius curves or higher, but capable of traversing 1st radius Livery: BR Bauxite with ‘Banana’ coding ‘Fyffes’ label Accurate colours and typefaces used Satin finish - TT:120 Scale

Hornby Pullman Kitchen Parlour First 'Fingall' (TT)

Kitchen Parlour First 'Fingall' Capture the elegance of luxury train travel with the K-Type Pullman Cars in TT:120, with crisp moulded bodyshells, detailed interiors and working table lamps. This new offering of 1st Class Kitchen named ‘Fingall’ is perfect for pairing with previous runs of Pullman coaches, and could easily run behind a 1940s steam locomotive, or a modern Class 50 or 66 on a charter train. Model Specification: Highly detailed model of 1st Class Kitchen Car Defined bogie mouldings with rivet detailing Detailed underframe Moulded interior Kinematic NEM coupling mechanism Accessory Pack Electronics: Working table lamps on analogue or DCC. Livery: Lined Pullman cream and brown Grey roof ‘Fingall’ painted names Semi-gloss finish - TT:120 Scale

Hornby IOW 4 Wheel 1st Class Coach 19 (TT)

IOW 4 Wheel 1st Class Coach 19  Take a trip down South with the IOW 4 Wheel 1st Class Coach 19 model, in its Isle of Wight Central Railway lined Teak livery.  The charming and distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 1st Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory Pack. Livery: Isle of Wight Central Railway Lined Teak Gold lettering Painted blue seating Satin finish - TT:120 Scale

Hornby IOW 4 Wheel 3rd Class Brake Coach 12 (TT)

IOW 4 Wheel 3rd Class Brake Coach 12  Bring some island magic to your rake with the IOW 4 Wheel 3rd Class Brake Coach 12, featuring the Isle of Wight Central Railway lined Teak livery.  The distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic Brake 3rd Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior, including guards’ compartment Kinematic NEM coupling mechanism Accessory Pack. Livery: Isle of Wight Central Railway Lined Teak Gold lettering Painted red seating Satin finish - TT:120 Scale

Hornby IOW 4 Wheel 3rd Class Coach 10 (TT)

IOW 4 Wheel 3rd Class Coach 10  IOW 4 Wheel 3rd Class Coach 10 is a charming model to add to your island-bound model train, featuring the Isle of Wight Central Railway lined Teak livery. The distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 3rd Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory Pack. Livery: Isle of Wight Central Railway Lined Teak Gold lettering Painted red seating Satin finish - TT:120 Scale

Hornby LSWR 4 Wheel 1st Class Coach 123 (TT)

LSWR 4 Wheel 1st Class Coach 123  This charming LSWR 4 Wheel 1st Class Coach 123 looks incredible in its London and South Western Railway Lined Salmon and Brown livery.  The distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 4-wheel 1st Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory pack. Livery: LSWR Lined Salmon and Brown Gold lettering Painted blue seating Satin finish - TT:120 Scale

Hornby LSWR 4 Wheel 3rd Class Brake Coach 179 (TT)

LSWR 4 Wheel 3rd Class Brake Coach 179 The LSWR 4 Wheel 3rd Class Brake Class 179 is a lovely addition to your TT:120 rake, featuring the London and South Western Railway lined Salmon and Brown livery.  The distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 4-wheel Brake 3rd Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior, including guards’ compartment Kinematic NEM coupling mechanism Accessory Pack. Livery: LSWR Lined Salmon and Brown Gold lettering Painted red seating Satin finish - TT:120 Scale

Hornby LSWR 4 Wheel 3rd Class Coach 302 (TT)

LSWR 4 Wheel 3rd Class Coach 302  Bring 4-wheel model charm to your layout with the LSWR 4 Wheel 3rd Class Coach 302 in its London and South Western Railway lined Salmon and Brown livery.  The distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 4-wheel 3rd Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory pack. Livery: LSWR Lined Salmon and Brown Gold lettering Painted red seating Satin finish - TT:120 Scale

Hornby BR Class 08 08499 EWS (TT)

BR Class 08 08499 EWS  Hornby are pleased to present a further two new colourful identities of the ever-popular BR Class 08 shunting diesel engine in the April Range Launch. Featuring a diecast chassis, coreless motor, all-wheel drive, immaculate paint application and much more, this ubiquitous shunting loco is undoubtedly going to stand out on your TT:120 layout. This example depicts No.08499 in early 2000’s corporate EWS Maroon & Gold livery, whilst allocated to depots in the South-West of England. Model Specification: Highly detailed model based on extensive research and design Diecast chassis Assortment of separately fitted parts, including body grabrails, cab steps, sandpipe fillers and buffer stocks Brass coupling rods Detailed cab interior Powerful coreless motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes bufferbeam pipes Minimum 2nd radius curves Electronics: 6-Pin DCC Decoder Socket compatible with HM7000 system Livery: EWS Maroon & Gold Yellow Coupling Rods Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Purple (TT)

BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Purple Adding to the ever-popular BR Class 08 diesel range, is Colchester TMD D3760. Featuring a die-cast chassis, coreless motor, all-wheel drive, and immaculate paint application, this ubiquitous shunting locomotive will stand out on your TT:120 layout. This example depicts No.08593/D3760 in retro BR Lined Purple livery, complete with ‘Cycling Lion’ Early Emblem and named ‘Colchester TMD’ as per 1990’s condition when based at either Colchester or Ipswich. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Assortment of separately fitted parts, including body grabrails, cab steps, sandpipe fillers and buffer stocks Brass coupling rods Detailed cab interior Powerful coreless motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes bufferbeam pipes Minimum 2nd radius curves Electronics: 6-Pin DCC Decoder Socket compatible with HM7000 system Livery: Retro BR Lined Purple, complete with early emblems Crisply applied Red lining White roof Wasp stripes Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Rapido UK Caledonian 'Single' ‘What If’ BR Lined Black Early No.54010

Caledonian 'Single' ‘What If’ BR Lined Black Early No.54010 Caledonian Railway ‘Single’ 4-2-2 ‘What If’ BR Lined Black Early Crest No.54010 Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets - OO Scale  

Rapido UK Caledonian 'Single' CR Blue Railtour Condition No.123

Caledonian Railway 'Single' CR Blue Railtour Condition No.123 Caledonian Railway ‘Single’ 4-2-2 Caledonian Railway Blue No.123 – Railtour Condition Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets - OO Scale

Rapido UK Caledonian 'Single' CR Blue Railtour Condition No.123 (SF)

Caledonian 'Single' CR Blue Railtour Condition No.123 (Sound Fitted) Caledonian Railway ‘Single’ 4-2-2 Caledonian Railway Blue No.123 – Railtour Condition Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets - OO Scale

Rapido UK Caledonian 'Single' LMS Lined Black No.14010

Caledonian 'Single' LMS Lined Black No.14010 Caledonian Railway ‘Single’ 4-2-2 LMS Lined Black No.14010 Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets - OO Scale  

Rapido UK Caledonian 'Single' LMS Lined Crimson No.14010

Caledonian 'Single' LMS Lined Crimson No.14010 Caledonian Railway ‘Single’ 4-2-2 LMS Lined Crimson No.14010 (post-1927 rebuild) Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets - OO Scale  

Peco TT Gauge - Flexible Field Fencing, 1360mm

Flexible Field Fencing The flexible field fencing represents a typical wooden post and bar-style fence that is so often seen separating boundaries in fields, and alongside the permanent way. Being produced in a flexile plastic mean that it can be placed on an undulating contoured surface, thus replicating reality. One pack provides straight sections only, the other gives modellers a variety of gate sand stiles. Moulded in brown plastic, can be used as-is, or painted as desired. Length: 1360mm - TT:120 Scale

Peco TT Gauge - Goods Shed SR (IOWR)

TT Gauge - Goods Shed SR (IOWR) Laser-cut wooden kit, comprising frets of parts to be assembled and painted. Based on the building once located at Ventnor West the structure will equally find a home on layouts themed around other locations.

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem)

GCR 9J (J11) 64305 BR Black (Early Emblem) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted)

GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Graham Farish Class 101 2-Car 'Power Twin' DMU BR Green (Sound Fitted) (N)

Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) (Sound Fitted) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a ‘Power Twin’ comprising two vehicles equipped with an engine and the associated transmission and whilst all of these details are replicated faithfully on the Graham Farish model, just one of the vehicles is motorised. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Green livery with Speed Whiskers 2-Car Unit comprising DMBS No. E51427 and DMCL No. E51497 Destination Blinds for Bradford and Doncaster Headcode B6 displayed at both ends Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) (N)

Class 101 2-Car 'Power Twin' DMU BR Green (Speed Whiskers) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a ‘Power Twin’ comprising two vehicles equipped with an engine and the associated transmission and whilst all of these details are replicated faithfully on the Graham Farish model, just one of the vehicles is motorised. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Green livery with Speed Whiskers 2-Car Unit comprising DMBS No. E51427 and DMCL No. E51497 Destination Blinds for Bradford and Doncaster Headcode B6 displayed at both ends Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Blue (N)

Class 101 2-Car DMU BR Blue The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in BR Blue livery operating in North East England and is typical of much of the fleet during the British Rail era. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Blue livery 2-Car Unit comprising DMBS No. E50166 and DTCL No. E56051 Destination Blinds for Hartlepool and Darlington Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Regional Railways (N)

Class 101 2-Car DMU BR Regional Railways The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in later life and having received a few modifications from its original condition, like the fitting of high intensity headlights and the addition of bodyside heater louvres. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Regional Railways livery Set No. 101660 2-Car Unit comprising DMBS No. 51189 and DTSL No. 54343 Destination Blinds for Sheffield and Manchester Piccadilly Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Graham Farish Class 101 2-Car DMU BR Regional Railways (Sound Fitted) (N)

Class 101 2-Car DMU BR Regional Railways (Sound Fitted) The Class 101 Diesel Multiple Units were the most numerous of all the first generation DMUs and had a long service life, remaining in use for almost half a century, and we’re delighted to present N Scale models of this iconic unit as part of the Graham Farish range. This two-car unit depicts a Class 101 in later life and having received a few modifications from its original condition, like the fitting of high intensity headlights and the addition of bodyside heater louvres. Each of the two cars is constructed from precision moulded bodyshells with flush glazing and a high level of raised and engraved detailing, from the ventilators and rivets found on the roof to the door furniture and window frames along each bodyside. Each chassis is adorned with all the underframe components you’d see on the prototype, including the engine, transmission, battery boxes and auxiliary gear. Both vehicles are brought to life with an exquisite livery application, using accurate colours, fonts and logos, and the detail and decoration extends to the interior too, where seating is fitted and painted accordingly, and the cab provides crew seats along with a representation of the control desk. The bogies are moulded with a high level of relief detail and separate footsteps are added where appropriate, meanwhile metal wheelsets are employed and electrical pickups from every wheel provide power for the directional lights at each cab end. The motorised vehicle is fitted with a powerful three pole motor with flywheel and both cars have a 6 pin DCC decoder socket; in the trailer a function decoder can be used to work the directional lights whereas the powered vehicle has a pre-fitted speaker so a sound decoder could be fitted to add sound to the model Details: Pristine BR Regional Railways livery Set No. 101660 2-Car Unit comprising DMBS No. 51189 and DTSL No. 54343 Destination Blinds for Sheffield and Manchester Piccadilly Features: Accessory Pack NEM Coupling Pockets Powerful 3 Pole Motor with Flywheel Interior Detailing Directional Lighting Speaker Fitted Equipped with two 6 Pin DCC Decoder Sockets – recommended Decoder 2 x item No. 36-568A Length 262mm (over couplings) - N Scale

Peco Catalogue (Edition 9 - 2026)

Peco Catalogue 2026 The PECO Product & Modelling Guide is out now and bigger than ever! Updated and expanded to 240 pages (last one was 224 pages) - that's an extra 16 pages-  full of essential information. It is not only a comprehensive guide to a huge range of PECO products and other brands, but also a modelling reference guide, to help with so many modelling techniques. Covering the PECO, Ratio, Wills, Parkside and Modelscene ranges, as well as the publications and Tracksetta templates. Products from the new TT:120 scale are included, as is the expanding Pecoscene Static Grass range and N gauge wagon range.  Explanations and helpful hints and tips on scales and gauges, rail codes, frog descriptions, standard and narrow gauge railways, baseboard building, track-laying, wiring using PECO turnout motors and Smartswitch servos, to operate turnouts and semaphore signals, kit building and painting, and scenic work are all included in this inspirational guide.      

Hornby BR Mk3 TS 42175 Virgin West Coast

BR Mk3 TS 42175 Virgin West Coast British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby BR Mk3 TF 41045 Virgin West Coast

BR Mk3 TF 41045 Virgin West Coast  British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby BR Mk3 TGS 44081 Virgin West Coast

BR Mk3 TGS 44081 Virgin West Coast  British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby BR Mk3 TRSB 40437 Virgin West Coast

BR Mk3 TRSB 40437 Virgin West Coast British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby BR Mk3 Virgin West Coast 4 Car Coach Pack

BR Mk3 Virgin West Coast 4 Car Coach Pack  Includes: Trailer Standard 42176 Trailer Standard 42177 Trailer Standard 42105 Trailer First 41059 British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby Railroad: BR Class 90 90001 'Royal Scot' LSL Intercity

Railroad: BR Class 90 90001 'Royal Scot' LSL Intercity  As the first member of class (originally to be designated Class 87/2 as the locomotives were seen as an upgraded version of the existing Class 87s), 90001 initially went to the Rail Technical Centre at Derby for testing in October 1987.  It entered service at Willesden depot in October 1987 and, in 1989, was named ‘BBC Midlands Today’. That name was removed in 2004 and, ten years later, it was given the name ‘Crown Point’ while based at Norwich with Abellio Greater Anglia. In April 2020, it was bought by Locomotive Services Limited, Crewe for main line excursion work. They repainted it in the original InterCity ‘Swallow’ livery and renamed it ‘Royal Scot’. It is one of three Class 90s currently owned by LSL, the others being 90002 and 90026.  This RailRoad locomotive model is a faithful representation of the electric engine, but with more durable features that make it perfect for regular model railway running. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 90 90001 'Royal Scot' LSL Intercity (Sound)

Railroad: BR Class 90 90001 'Royal Scot' LSL Intercity (Sound Fitted) As the first member of class (originally to be designated Class 87/2 as the locomotives were seen as an upgraded version of the existing Class 87s), 90001 initially went to the Rail Technical Centre at Derby for testing in October 1987.  It entered service at Willesden depot in October 1987 and, in 1989, was named ‘BBC Midlands Today’. That name was removed in 2004 and, ten years later, it was given the name ‘Crown Point’ while based at Norwich with Abellio Greater Anglia.  In April 2020, it was bought by Locomotive Services Limited, Crewe for main line excursion work. They repainted it in its original InterCity ‘Swallow’ livery and renamed it ‘Royal Scot’. It is one of three Class 90s currently owned by LSL, the others being 90002 and 90026.  This RailRoad model brings the locomotive to life in OO scale form, but with more durable features than found on our main range. It is also pre-fitted with a DCC sound chip, for the most authentic model railway experience. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG BS

Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG British Steel Blue Built by English Electric at its Vulcan Foundry in Lancashire, the locomotive this RailRoad model is based on started life in January 1961 as D6705, going new to Stratford depot in London.  After becoming 37005 under TOPS, it was rebuilt as a Class 37/5 in April 1985, which included replacing its EE generator with a new Brush unit, and a complete re-wire, with a consequent renumbering to 37501. It was then painted into its distinctive British Steel pale blue colour scheme, gaining Thornaby Kingfisher motif and British Steel logos. It was then named ‘Teesside Steelmaster’ in 1987.  It was later modified for the proposed Channel Tunnel sleeper ‘Nightstar’ project (which was later aborted) to become a 37/6 in February 1995 and renumbered to 37601. It is currently one of six Class 37s leased by Rail Operations Group from Europhoenix for contracted movement of passenger stock, including EMUs. It was returned to its 1987 guise during a repaint in 2025.  This RailRoad model locomotive is a durable design, perfect for model railway beginners, younger enthusiasts, or anyone who enjoys running their trains daily. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 37 37501 'Teesside Steelmaster'(Sound Fitted)

Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG British Steel Blue (Sound Fitted) Built by English Electric at its Vulcan Foundry in Lancashire, the locomotive this RailRoad model is based on started life in January 1961 as D6705, going new to Stratford depot in London.  After becoming 37005 under TOPS, it was rebuilt as a Class 37/5 in April 1985, which included replacing its EE generator with a new Brush unit, and a complete re-wire, with a consequent renumbering to 37501. It was then painted into its distinctive British Steel pale blue colour scheme, gaining Thornaby Kingfisher motif and British Steel logos. It was then named ‘Teesside Steelmaster’ in 1987.  It was later modified for the proposed Channel Tunnel sleeper ‘Nightstar’ project (which was later aborted) to become a 37/6 in February 1995 and renumbered to 37601. It is currently one of six Class 37s leased by Rail Operations Group from Europhoenix for contracted movement of passenger stock, including EMUs. It was returned to its 1987 guise during a repaint in 2025.  This RailRoad model locomotive is a durable design, perfect for model railway beginners, younger enthusiasts, or anyone who enjoys running their trains daily. Plus, it has been pre-fitted with a DCC sound chip for HM7000 control. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby BR Class 43 HST EMR 43274 & Intercity Swallow 43102 Pack

BR Class 43 HST EMR 43274 & Intercity Swallow 43102 Pack  This hybrid train pack represents the final months of HST operation with East Midland Railway in 2021, when 43274 became the first and only Class 43 to carry the interim EMR purple aubergine livery. Owned by Colas, it is still in service today. Meanwhile, 43102 was turned out in retro InterCity ‘Swallow’ livery in February 2021, recalling its record-setting feat with 43159, when they became the world’s fastest diesel locomotives attaining a speed of 148.5mph in November 1987. Withdrawn in May 2021, it is now part of the National Collection and on display at Shildon.  Our models feature NEM tension lock couplings, with the EMR locomotive sporting a stylish purple livery and the Intercity train painted in the iconic grey and white colours. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack

BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack This Virgin Class 43 HST 'Lady in Red' train pack brings the vibrant red and black livery to your model railway layout, creating quite an impression as it moves around the tracks. This OO gauge locomotive model has NEM tension lock couplings and a 21-pin socket, so you can upgrade to HM7000 control when you are ready.  Virgin Trains won both the InterCity West Coast and InterCity CrossCountry franchises following privatisation of BR, commencing services under its Virgin branding in 1997. It inherited a variety of locomotives and rolling stock from BR, including InterCity 125 HST sets.  Class 43 power car 43093 had been named ‘York Festival 88’ under BR, but was renamed ‘Lady in Red’ in 1997, which it carried until 2003, while 43097 had been called ‘The Light Infantry’ until 1990, but entered service with Virgin CrossCountry without a name. Painted in the company’s red and black livery, with white markings, both later became part of First Great Western’s HST fleet. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST Virgin West Coast Train Pack (Sound Fitted)

BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack (Sound Fitted) This Virgin Class 43 HST "Lady in Red' Train Pack brings the bold red branding of Virgin to your model railway layout, ensuring an eye-catching visual as it charges round the track. This OO model locomotive pack features NEM tension lock couplings and is ready-fited with HM7000 sound control, giving you a digital model railway experience.  Virgin Trains won both the InterCity West Coast and InterCity CrossCountry franchises following privatisation of BR, commencing services under its Virgin branding in 1997. It inherited a variety of locomotives and rolling stock from BR, including InterCity 125 HST sets.  Class 43 power car 43093 had been named ‘York Festival 88’ under BR, but was renamed ‘Lady in Red’ in 1997, which it carried until 2003, while 43097 had been called ‘The Light Infantry’ until 1990, but entered service with Virgin CrossCountry without a name. Painted in the company’s red and black livery, with white markings, both later became part of First Great Western’s HST fleet. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition)

LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition) (150th Anniversary Collection) The LNER Class A4 Sir Nigel Gresley model locomotive is a limited edition model and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Gresley's birth, and this locomotive includes a figure.  With a shiny new blue livery and NEM tension lock couplings, this steam locomotive is a wonderful collector's piece.  Entering service with the LNER as 4498 in Garter blue with streamlined side-skirting and red wheels, this was the 100th Gresley ‘Pacific’ to be built when it emerged from Doncaster Works in October 1937. Allocated to King’s Cross ‘Top Shed’ and used on front-line express services such as the prestigious ‘Coronation’ between London and Edinburgh, ‘SNG’ was built with a single chimney and had stainless steel numbers and letters for the tender added at a general overhaul in January 1939.  After a period in wartime black, when the side-skirts were permanently removed, the locomotive returned to lined Garter blue in March 1947. Painted into BR’s express passenger blue in September 1950, as 60007, it set a post-war steam record speed of 112mph on 23 May 1959. Withdrawn in February 1966, by now in BR green, it was saved for preservation by the A4 Locomotive Society. - DCC Ready 21-Pin Socket - OO Scale

Hornby LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition)

LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition) (150th Anniversary Collection) The LMS Streamlined 'Coronation' model locomotive is a limited edition item and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Stanier's birth, and this locomotive includes a figure. With a shiny bold red livery and NEM tension lock couplings, this steam locomotive is a must-have for collectors. The ‘Princess Coronation’ Class, also known as the ‘Duchess’ Class, was an enlarged and improved version of William Stanier’s successful ‘Princess Royal’ Class ‘Pacific’. The first ten class members emerged from Crewe Works in a streamlined form during 1937 and five of these were put aside specifically for hauling the prestigious ‘Coronation Scot’ between London Euston and Glasgow Central. These were painted in Caledonian blue and had silver horizontal lining, which matched the carriages they pulled. No. 6220 set a new British steam speed record of 114mph in 1937, but this was beaten by the LNER’s ‘Mallard’ in 1938. Built with a single chimney, 6220 was the last of the original 15 to be fitted with a double blast pipe and chimney in 1944. The locomotive’s streamlined casing was removed in November 1946, and it finished its career in its rebuilt form with smoke deflectors as BR’s 46220 in April 1963. - DCC Ready 21-Pin Socket - OO Scale

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved The BR English Electric DP1 'Deltic' is always a favourite model, and with its new blue livery, this OO gauge diesel engine is sure to be just as popular. This version features sprung metal buffers, NEM tension lock couplings and a coreless motor. It is also DCC-ready with a 21-pin socket for easy HM7000 conversion. Features include: High detail OO gauge model based on extensive research Presented as on display in Locomotion, Shildon, with grey chassis, steps and buffers; and horns removed Heavy, fully die-cast chassis and body Highly detailed cab interior Decorated driver controls with illuminated instrument dials Directional head and tail lighting Optional working Mars lights Working cab lights Engine bay lighting Physical switches on blanking plug to control the various lighting configurations Magnetic roof cover to access 21-Pin DCC socket Dual working roof fans, with manually adjustable speed controls Separately fitted etched window frames Large, powerful coreless motor with two flywheels for smooth running Dual bogie drive Sprung metal buffers Front and rear NEM coupling pocket Additional lamps supplied in the accessory bag Hand painted driver figures Supplied with 8 finely decorated etchings, including Locomotion headboard Decorated engine bay featuring printed ‘Napier Deltic’ plates Pre-fitted with a sugar cube speaker for easy digital conversion Space inside for HM7000 Enhanced Bass Speaker Space inside fuel tank for HM7070 - Power Bank Flange squeal sensor mounted in the bogies automatically detects when it is going round a curve to play flange squeal sounds dependant on speed. (Feature available once product is fitted with a HM7000 decoder) Fitted to display plinth with etched presentation plate Fully compatible with Hornby HM7000 app control system, with meticulously crafted Deltic sound profile (SD049) available for download. - DCC Ready 21-Pin Socket - OO Scale

Graham Farish GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) (N)

GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. After a long period of absence from the Graham Farish range, the ‘Hall’ makes a triumphant return for 2025 with this brand new model that has been designed from the rails up to produce a masterpiece in miniature befitting of such an iconic prototype. These mixed traffic machines were found across the Great Western network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine BR Lined Green (Late Crest) Livery Running No. 4936 Named ‘Kinlet Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) (SF)(N)

GWR 49XX 'Hall' 4936 'Kinlet Hall' BR Lined Green (Late) (Sound Fitted) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. After a long period of absence from the Graham Farish range, the ‘Hall’ makes a triumphant return for 2025 with this brand new model that has been designed from the rails up to produce a masterpiece in miniature befitting of such an iconic prototype. These mixed traffic machines were found across the Great Western network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine BR Lined Green (Late Crest) Livery Running No. 4936 Named ‘Kinlet Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 49XX 'Hall' 4962 'Ragley Hall' BR Lined Green (Early) (N)

GWR 49XX 'Hall' 4962 'Ragley Hall' BR Lined Green (Early) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. After a long period of absence from the Graham Farish range, the ‘Hall’ makes a triumphant return for 2025 with this brand new model that has been designed from the rails up to produce a masterpiece in miniature befitting of such an iconic prototype. These mixed traffic machines were found across the Great Western network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Pristine BR Lined Green (Early Emblem) Livery Running No. 4962 Named ‘Ragley Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 6960 'Raveningham Hall' GWR L/Green (SF) (N)

GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green (Sound Fitted) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine GWR Lined Green (Great (crest) Western) Livery Running No. 6960 Named ‘Raveningham Hall’ Collett 4,000-gallon Tender GWR Smokebox Door without Numberplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green (N)

GWR 'Modified Hall' 6960 'Raveningham Hall' GWR Lined Green The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Locomotive is Preserved Pristine GWR Lined Green (Great (crest) Western) Livery Running No. 6960 Named ‘Raveningham Hall’ Collett 4,000-gallon Tender GWR Smokebox Door without Numberplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (N)

GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound Details: Pristine BR Lined Black (Early Emblem) Livery Running No. 7904 Named ‘Fountains Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Graham Farish GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (SF)(N)

GWR 'Modified Hall' 7904 'Fountains Hall' BR Lined Black (Sound Fitted) The Great Western Railway (GWR) was famous for its variety of 4-6-0 steam locomotive classes, and none were more numerous and successful than the 49XX ‘Hall’ Class. The type was later developed to create the 6959 ‘Modified Hall’ Class which continued the successes of the ‘Halls’, operating from the final years of the GWR and throughout the British Railways period until steam ended on the Western Region in December 1965 yet N scale models of these iconic machines have never been produced, until now! Developed alongside the brand new ‘Halls’ for the Graham Farish range, these masterpieces in miniature have been created through extensive research and detailed surveys of the preserved locomotives, of which there are several. The mixed traffic machines were found across the GWR network and beyond. Constructed from a multitude of high-fidelity parts and decorated with an exquisite paint finish, the new Graham Farish ‘Modified Hall’ has an impressive technical specification to match. Employing a powerful coreless motor to drive the wheels through a diecast metal gearbox, electrical pickup comes from all driving and tender wheels and separate metal bearings are fitted to the driving wheel axles assuring smooth and reliable running. The tender houses a speaker and Next18 DCC decoder socket Details: Pristine BR Lined Black (Early Emblem) Livery Running No. 7904 Named ‘Fountains Hall’ Collett 4,000-gallon Tender BR Smokebox Door with Numberplate and Shedplate Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Speaker installed in the tender of all models for optimum sound reproduction Length 141mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater - N Scale

Oxford Diecast VW T2 Bus w/ Surfboards Fiord Blue/Arcona White (TT)

The VW T2 was a camper and a minibus combined, which the German manufacturer launched in 1968. Sporting a larger interior, a bigger engine and a one-piece windscreen, it also came with a number of versatile body options and you will recall its Oxford Diecast launch as a simple van in Peru Green. The two-tone vehicle is painted a muted blue with off white roof and upper body. The bumpers and wheel rims also echo the off white colour scheme. Registered EOG 400K from 1971, our model has two surfboards on the roof, carried on a tan slatted roof rack with a silver frame. The interior of our van is also the same muted blue as the body.  Summer might have faded but this little van is already to go and find some surf, whatever the weather. - TT:120 Scale

Bachmann Class 13 13003 BR Blue - DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 13003 BR Blue - Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Hornby Railroad: Class 37 093 PoliceAdvert (Sound Fitted)

Railroad: Class 37 37093 Police BR 125 Advert (Sound Fitted) Recognised for its memorable role in a television advert – flagging down a speeding HST power car, this highly detailed model of Class 37 No. 37093 comes presented in its unique ‘Police’ promotional livery. Complete with a roof-mounted working blue light and DCC sound-fitted with Class 37 and effects, functions, and an authentic police siren straight out of the box. Equipped with NEM tension lock couplings and plastic buffers, this Co-Co diesel is built to perform on second radius curves or greater. History: Built at English Electric’s Robert Stephenson & Hawthorns works, this locomotive entered BR service as D6793 in 1963, allocated to Gateshead. Re-numbered 37093 in February 1974, it was painted into ‘Police’ livery, complete with blue light, for a BR television advertising campaign in July 1985, before returning to a more traditional livery at Stratford in August. It was renumbered 37509 in June 1986 and in 1989 allocated to the Freight Metals sector Thornaby pool. It finished its career with EWS and was cut up at Cardiff Canton in August 2005. - OO Scale

Hornby Railroad: Class 37 37418 'An Comunn Gaidhealach' Loram (SF)

Railroad: Class 37 37418 'An Comunn Gaidhealach' Loram (Sound Fitted) Finished in the Loram livery, Class 37 No. 37418 ‘An Commun Gaidhealach’ is brought to life in this detailed 00 gauge model.  Fitted with Hornby’s HM7000 21-pin sound decoder it delivers realistic, immersive audio straight from the box and is compatible with DCC and HM7000 App control.  As part of our RailRoad range, this model has been designed with fewer delicate detail parts and more durable detailing, making it better for handling - perfect for beginners or for adding to your existing collection! History: Released into BR traffic from Vulcan Foundry as D6971 on 18 March 1965, this locomotive was first allocated to Cardiff Canton. It was rebuilt as a Class 37/4 and renumbered 37418 in 1985 and transferred to Inverness. It received its unusual name ‘An Commun Gaidhealach’ (The Gaelic Association) at Edinburgh in October 1986, before entering the Provincial General Pool from January 1989.  It was renamed ‘Pectindae’ in April 1992, and then ‘East Lancashire Railway’ in April 1994, eventually being sold to a private owner in 2007 by EWS. It is currently on-hire to freight operator Loram Rail and painted in its livery, the ‘An Commun Gaidhealach’ name being reinstated in February 2024. - OO Scale

Hornby Railroad: Class 47 47306 'The Sapper' Railfreight Distribution

Railroad: Class 47 47306 'The Sapper' Railfreight Distribution A striking and authentic addition to any diesel-era collection, the R30440 Railfreight Distribution Class 47 Co-Co 47306 ‘The Sapper’ is finished in the Railfreight Distribution livery. This detailed model includes separately fitted plastic buffers and NEM coupling pockets. It comes equipped with a 21-pin DCC decoder socket, making it easy to upgrade for digital operation. - 21 pin DCC ready - OO Scale

Hornby Railroad: Class 47 47306 'The Sapper' RFD (Sound Fitted)

Railroad: Class 47 47306 'The Sapper' Railfreight Distribution (Sound Fitted)   - OO Scale - DCC TXS Sound Fitted (requires DCC or HM7000 App to operate) - NEM Tension Lock

Gaugemaster Collection Class 73 '73123' "Gatwick Express" BR InterCity Executive (N)

Class 73 '73123' "Gatwick Express" BR InterCity Executive These Locomotives were produced for the 1955 modernisation plan and were used for various jobs around the southern region including parcel and freight trains. As they could reach speeds of up to 80mph they were also used on quite a few passenger services. The class 73 was designed so that it could run on the southern region’s 650/750v DC third rail or using its own on-board diesel engine which meant it could operate on non-electrified routes. A total number of 49 Class 73’s were built between 1962 and 1967 and most of them can still be seen running up and down the southern region, a few were painted in Network Rail Yellow and used for track testing and maintenance but most of them were preserved on railways such as the Dean Forest Railway. Features: Gaugemaster Limited Edition Detailed body with etched grills and separately fitted hand rails Darkened wheels and pin point bearings 5 Pole motor for smoother operation 6-Pin DCC Decoder Socket All wheel drive All Wheel pick up Directional lighting NEM couplings Includes both standard and knuckle couplings Includes spares bag with additional detailing parts - N Scale

Gaugemaster Collection Class 73 '73126' BR Large Logo Blue (N)

Class 73 '73126' BR Large Logo Blue These Locomotives were produced for the 1955 modernisation plan and were used for various jobs around the southern region including parcel and freight trains. As they could reach speeds of up to 80mph they were also used on quite a few passenger services. The class 73 was designed so that it could run on the southern region’s 650/750v DC third rail or using its own on-board diesel engine which meant it could operate on non-electrified routes. A total number of 49 Class 73’s were built between 1962 and 1967 and most of them can still be seen running up and down the southern region, a few were painted in Network Rail Yellow and used for track testing and maintenance but most of them were preserved on railways such as the Dean Forest Railway. Features: Gaugemaster Limited Edition Detailed body with etched grills and separately fitted hand rails Darkened wheels and pin point bearings 5 Pole motor for smoother operation 6-Pin DCC Decoder Socket All wheel drive All Wheel pick up Directional lighting NEM couplings Includes both standard and knuckle couplings Includes spares bag with additional detailing parts - N Scale

Gaugemaster Collection Class 73 '73235' Intercity Swallow (N)

Class 73 '73235' Intercity Swallow These Locomotives were produced for the 1955 modernisation plan and were used for various jobs around the southern region including parcel and freight trains. As they could reach speeds of up to 80mph they were also used on quite a few passenger services. The class 73 was designed so that it could run on the southern region’s 650/750v DC third rail or using its own on-board diesel engine which meant it could operate on non-electrified routes. A total number of 49 Class 73’s were built between 1962 and 1967 and most of them can still be seen running up and down the southern region, a few were painted in Network Rail Yellow and used for track testing and maintenance but most of them were preserved on railways such as the Dean Forest Railway. Features: Gaugemaster Limited Edition Detailed body with etched grills and separately fitted hand rails Darkened wheels and pin point bearings 5 Pole motor for smoother operation 6-Pin DCC Decoder Socket All wheel drive All Wheel pick up Directional lighting NEM couplings Includes both standard and knuckle couplings Includes spares bag with additional detailing parts - N Scale

Gaugemaster Collection Class 73 'E6039' BR Electric Blue (N)

Class 73 'E6039' BR Electric Blue These Locomotives were produced for the 1955 modernisation plan and were used for various jobs around the southern region including parcel and freight trains. As they could reach speeds of up to 80mph they were also used on quite a few passenger services. The class 73 was designed so that it could run on the southern region’s 650/750v DC third rail or using its own on-board diesel engine which meant it could operate on non-electrified routes. A total number of 49 Class 73’s were built between 1962 and 1967 and most of them can still be seen running up and down the southern region, a few were painted in Network Rail Yellow and used for track testing and maintenance but most of them were preserved on railways such as the Dean Forest Railway. Features: Gaugemaster Limited Edition Detailed body with etched grills and separately fitted hand rails Darkened wheels and pin point bearings 5 Pole motor for smoother operation 6-Pin DCC Decoder Socket All wheel drive All Wheel pick up Directional lighting NEM couplings Includes both standard and knuckle couplings Includes spares bag with additional detailing parts - N Scale

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight (SFD)

Class 66/8 66847 'Terry Baker' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SF)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SFD)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SF)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SFD)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association'GBRf Europorte

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte

Class 66/7 66777 'Annette' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted Deluxe)

Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted)

Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight

Class 66/8 66847 'Terry Baker' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted)

Class 66/3 66304 DRS Plain Blue (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SF)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted)  The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SFD)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/5 66515 Freightliner Racing Green (Sound Fitted Deluxe)

Class 66/5 66515 Freightliner Racing Green (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Freightliner Green livery Running No. 66515 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/6 66606 Freightliner Racing Green (Sound Fitted Deluxe)

Class 66/6 66606 Freightliner Racing Green (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Freightliner Green livery Running No. 66606 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66096 EWS

Class 66/0 66096 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66096 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue

Class 66/3 66304 DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe)

Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66015 EWS

Class 66/0 66015 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66015 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann JGA Bogie Hopper VTG Grey 'VTG 19214'

JGA Bogie Hopper VTG Grey 'VTG 19214' The JGA Bogie Hoppers were built in Slovakia in the mid-1990s for Buxton Lime Industries and Tilcon, primarily working from Tunstead Quarry, operated by Buxton Lime Industries, near Buxton on the edge of the Peak District. Consisting of a large hopper with three pairs of bottom discharge doors, the wagons were used to transport lime products from the quarry for distribution around the UK and the type remains in use in limited numbers today. Reproduced in OO Scale by Bachmann Branchline, the JGA model features a precision moulded bodyshell which captures the wagon’s distinctive sloping ends with their ribbed constructed. Below the solebar, the three sets of discharge doors are added separately, meanwhile a metal weight is concealed above each bogie to ensure smooth running. The bogies themselves are fitted with metal wheels and axles whilst the integrated NEM coupling pockets allow alternative couplings to be fitted with ease. Separate brakes are added and the bogies each sport spring and suspension detailing in full relief. Whilst it could be said that the plain grey livery is the very definition of simplicity, the model’s paintwork is applied flawlessly complete with the VTG lettering and logo alongside the various markings and operating instructions that are found on the real wagons. Features: Pristine VTG Grey livery Running No. VTG 19214 NEM Coupling Pockets Length 199mm (over couplings) - Era 9 - OO Scale

Bachmann 35 Ton PAV Bulk Grain Wagon BRT Brown

35 Ton PAV Bulk Grain Wagon BRT Brown The 35 Ton Grain Hopper Wagons, sometimes known as Whisky Covhops (COVered HOPpers), were built in the late-1960s for the transportation of grain from growing regions like East Anglia and South East England to the whisky distilleries of Scotland. The 4 wheel hopper wagons provided an increased payload over the types they replaced and were operated by Associated British Maltsters Ltd. And Scottish Malt Distillers. At first bold and colourful advertising boards were carried on the sides of wagons, but these were soon removed leaving just the brown livery, although some were later painted into the more eye catching ‘Grainflow’ scheme of green and grey. In later years some wagons were used on Alumina traffic in Scotland but all had been withdrawn before the end of the twentieth century. Features: Pristine BRT Brown Livery Running No. 7587 Length 118mm (over couplings) - Era 7 - OO Scale

Bachmann 35 Ton PAV Bulk Grain Wagon BRT Brown [W]

35 Ton PAV Bulk Grain Wagon BRT Brown [W] The 35 Ton Grain Hopper Wagons, sometimes known as Whisky Covhops (COVered HOPpers), were built in the late-1960s for the transportation of grain from growing regions like East Anglia and South East England to the whisky distilleries of Scotland. The 4 wheel hopper wagons provided an increased payload over the types they replaced and were operated by Associated British Maltsters Ltd. And Scottish Malt Distillers. At first bold and colourful advertising boards were carried on the sides of wagons, but these were soon removed leaving just the brown livery, although some were later painted into the more eye catching ‘Grainflow’ scheme of green and grey. In later years some wagons were used on Alumina traffic in Scotland but all had been withdrawn before the end of the twentieth century. Features: Weathered BRT Brown Livery Running No. 7616 Length 118mm (over couplings) - Era 7 - OO Scale

Bachmann 35 Ton PAA Bulk Grain Wagon 'Grainflow' Green & Grey [W]

35 Ton PAA Bulk Grain Wagon 'Grainflow' Green & Grey [W]  The 35 Ton Grain Hopper Wagons, sometimes known as Whisky Covhops (COVered HOPpers), were built in the late-1960s for the transportation of grain from growing regions like East Anglia and South East England to the whisky distilleries of Scotland. The 4 wheel hopper wagons provided an increased payload over the types they replaced and were operated by Associated British Maltsters Ltd. And Scottish Malt Distillers. At first bold and colourful advertising boards were carried on the sides of wagons, but these were soon removed leaving just the brown livery, although some were later painted into the more eye catching ‘Grainflow’ scheme of green and grey. In later years some wagons were used on Alumina traffic in Scotland but all had been withdrawn before the end of the twentieth century. Features: Weathered ‘Grainflow’ Green & Grey Livery Running No. BRT 7781 Length 118mm (over couplings) - Era 8 - OO Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black

Class 69 69013 Andy's Man Club GBRf Black Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted Deluxe)

Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted Deluxe) Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted)

Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted) Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Peco 1960s Semi-Detached Houses (Double Low Reliefs Backs)

1960s Semi-Detached Houses (Double Low Reliefs Backs) Following on from the release of our Victorian houses, we have moved forward a century with these rather more utilitarian house kits, based on a design that first appeared in the 1960s. We have all seen these houses - they are all over the UK, forming a familiar feature in virtually every town and city. There are 3 kits available: Low-relief Fronts & Backs, and the Full Building Kit. Easy and satisfying to build, the laser-cut detail is extremely fine, with wonderful brick and tile textures on the surface. The models also feature guttering and downpipes, a separate porch at the front and blinds in the windows, which can be positioned as desired. Once built the models can be painted to reflect the modeller's individual choice.  You can easily imagine a row of these 1960s house backs lining up alongside the railway, or a small housing estate located close to the railway station - a perfect scene on the layout that can be enhanced with various other PECO, Ratio, Wills and Harburn Hamlet accessories. Technical Specification: 138mm x 47mm (Footprint) - Laser cut Wood kit - OO Scale

Peco 1960s Semi-Detatched Houses (Double Low Relief Fronts)

1960s Semi-Detatched Houses (Double Low Relief Fronts) Following on from the release of our Victorian houses, we have moved forward a century with these rather more utilitarian house kits, based on a design that first appeared in the 1960s. We have all seen these houses - they are all over the UK, forming a familiar feature in virtually every town and city. There are 3 kits available: Low-relief Fronts & Backs, and the Full Building Kit. Easy and satisfying to build, the laser-cut detail is extremely fine, with wonderful brick and tile textures on the surface. The models also feature guttering and downpipes, a separate porch at the front and blinds in the windows, which can be positioned as desired. Once built the models can be painted to reflect the modeller's individual choice.  You can easily imagine a row of these 1960s house backs lining up alongside the railway, or a small housing estate located close to the railway station - a perfect scene on the layout that can be enhanced with various other PECO, Ratio, Wills and Harburn Hamlet accessories. Technical Specification: 138mm x 65mm (Footprint) - Laser Cut Wood Kit - OO Scale

Peco 1960s Semi Detached Houses

1960s Semi Detached Houses Following on from the release of our Victorian houses, we have moved forward a century with these rather more utilitarian house kits, based on a design that first appeared in the 1960s. We have all seen these houses - they are all over the UK, forming a familiar feature in virtually every town and city. There are 3 kits available: Low-relief Fronts & Backs, and the Full Building Kit. Easy and satisfying to build, the laser-cut detail is extremely fine, with wonderful brick and tile textures on the surface. The models also feature guttering and downpipes, a separate porch at the front and blinds in the windows, which can be positioned as desired. Once built the models can be painted to reflect the modeller's individual choice.  You can easily imagine a row of these 1960s house backs lining up alongside the railway, or a small housing estate located close to the railway station - a perfect scene on the layout that can be enhanced with various other PECO, Ratio, Wills and Harburn Hamlet accessories. Technical Specification: 138mm x 112mm (Footprint) - Laser cut wood kit - OO Scale

Dapol NER Class E1 (LNER J72) '2173' NER Lined Black (N)

NER Class E1 (LNER J72) '2173' NER Lined Black First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '2183' LNER Pre-War Black (N)

LNER J72 '2183' LNER Pre-War Black First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68723' BR Black (Early) (Newcastle Station Pilot) (N)

LNER J72 '68723' BR Black (Early) (Newcastle Station Pilot) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68736' BR Lined Apple Green (York Station Pilot) (N)

LNER J72 '68736' BR Lined Apple Green (York Station Pilot) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68745' BR Black (Early) (N)

LNER J72 '68745' BR Black (Early) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '69007' BR Black (Late) (N)

LNER J72 '69007' BR Black (Late) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '69023' BR Lined Apple Green (Preserved) (N)

LNER J72 '69023' BR Lined Apple Green (Preserved)  First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '8680' LNER Lined Green (N)

LNER J72 '8680' LNER Lined Green First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Scale Model Scenery Wright's Lock-Up – Laser-cut kit (OO)

Wright's Lock-Up – Laser-cut kit Wright's Lockup is a small but perfectly formed, versatile OO gauge / 1:76 scale lockup / stores building suitable for industrial, town or harbourside scenes. Based on a real life protoype in Penzance, Cornwall, the building features heavily weathered Flemish Bond brickwork with wooden doors, sash windows, slate roof & downspouts. The side wall also features an optional ghost sign for Wright's Electrical, Hot Water & Sanitary Engineers which would have been the local plumbers & electricians back in the good old days. Also included is an alternative set of buff stone wraps which can be used to give the building a more rural feel.  The kit is supplied with laser-cut parts for ease of assembly and comes with fully weathered paper wraps and roof slates, with no additional painting or weathering required on the main components for a "Realistically Better" finish straight from the pack. The window & doors are supplied laser-cut from our eco-friendly laserboard and are packed with detail including engraved planks, hinges and locks. These will require painting with acrylic paints prior to assembly or colouring with suitable markers. We used a Plastikote Stone color for our test build which we then coated lightly with ground pastels to weather them down for a little less prestine finish. The building consists of two floors and features interior wall wraps for both the brick and stone versions, with white wash & flaking paint for added realism. Ceiling and floor details are also included for the upper floor. There's also plenty of scope for customisation too... with the slates being applied in individual strips it's easy to build it in either pristine or derelict condition (or anywhere in between). And with care, you can also pose the doors open or closed. Features: Fully weathered photo-realistic old stone or brick walls & roof slates - main structure requires no painting to acheive a realistically better finish Stone & brick wall interior detailing included Doors can be posed open or closed MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 78mm x W: 42mm x H: 72mm - OO Scale

Scale Model Scenery Workers Cottages – Laser-cut kit (OO)

Workers Cottages – Laser-cut kit Based on a pair of real cottages not far from our HQ in Cornwall, these stone-built cottages have a quintessentially English feel... you can easily imagine entering the cosy living room through the front door, ducking to avoid the low, beamed ceiling. The roaring open fire and the smell of freshly baked scones coming from the kitchen! This kit has lots of scope for kit-bashing too and is supplied with a choice of brick & white painted stone paper wraps for the walls plus laser-cut pre-weathered roof slates. We've also added super-realistic sash windows & wooden doors so you can really go to town customising this kit to fit perfectly into your layout. Doors, window frames, guttering and chimney tops require painting before the kit is assembled which can be done with solvent or acrylic-based paints. We actually used a black Sharpie to colour the guttering on our prototype and it works a treat. - OO Scale

Scale Model Scenery Tony's Cart Shed – Laser-cut kit (OO)

Tony's Cart Shed – Laser-cut kit A versatile cart shed / workshop building suitable for farm, coastal, railway or industrial use. The design is typical of many buildings of this type that can still be seen all over the British Isles and is supplied with a choice of white painted red brick & whitewashed stone walls. Both finishes feature plenty of weathering for a worn & well-used finish. The kit is supplied with laser-cut parts for ease of assembly with no additional painting or weathering required for a "Realistically Better" finish straight from the pack apart from the windows, doors & laserboard parts, which can be quickly and easily painted & weathered with acrylic paints. The building consists of two components: Workshop/Cart Shed with double sliding doors, small 9 pane window & side door. Doors can be posed open or closed. The store building is separate from the main building enabling you to position it wherever you wish in relation to the main building. Doors & window frames require painting before the kit is assembled which can be done with solvent or acrylic based paints. We used a Plastikote matt black for our test build which we then dry-brushed with burnt umber, white & slate grey artists acrylics to create a weathered wood look. Additional detail is then added to finish the building with downspouts & bargeboards. There's also plenty of scope for customisation too... with a variety of addition detailing accessories included: Circular saw blades Gears Ladders Assorted wooden planks Dimensions Large Workshop: L: 110mm x W: 60mm x H: 57mm Small Store: L: 33mm x W: 31mm x H: 30mm - OO Scale

Scale Model Scenery Polsue Stables/Stores – Laser-cut kit (OO)

Stables/Stores – Laser-cut kit A versatile OO gauge / 1:76 scale stables / stores building suitable for farm, railway or industrial use. The design is typical of many buildings of this type that can still be seen all over the British Isles, with stone/brick walls & slate roof. The kit is supplied with laser-cut parts for ease of assembly and comes with fully weathered paper wraps and roof slates, with no additional painting or weathering required for a "Realistically Better" finish straight from the pack. The windows & vent are supplied laser-cut from our eco-friendly laserboard and are packed with detail including engraved planks, hinges and locks. The building consists of two rooms; the main stable & tack room. An alternative solid door is also included to replace the split, stable door if the building is to be used as a stores rather than for horses. And all interior walls feature stone wall detail enabling you to easily detail the interior and pose any of the doors part of fully open. Doors & other woodwork require painting before the kit is assembled which can be done with solvent or acrylic based paints. We used a Plastikote Stone color for our test build which we then dry-brushed with burnt sienna, white & slate grey artists acrylics to create a weathered wood look. There's also plenty of scope for customisation too... with the slates being applied in individual strips it's easy to build it in either pristine or derelict condition (or anywhere in between). Features: Fully weathered photo-realistic old stone or brick walls & roof slates - main structure requires no painting to acheive a realistically better finish Stone & brick wall interior detailing included Doors can be posed open or closed MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 77.6mm x W: 43mm x H: 42mm  - OO Scale

Scale Model Scenery Pre-Weathered Laser Cut Roof Slates – Laser-cut kit (OO)

Pre-Weathered Laser Cut Roof Slates – Laser-cut kit An A4 sheet of pre-weathered, laser cut roof slates, ready to apply to the roofs of your model buildings. These laser cut, pre-weathered slate roofing strips are the fastest way for the discerning modeller to create a realistic roof on a model building. No painting or weathering required. Simply release the strips from the card sheet, trim & glue into place... Job done! Our OO gauge roof tiles are based off the real life equivalent allowing you to build a realistic roof which is accurate. These tiles are sturdy but can be manipulated meaning you can get your roof exactly how you want it. Assembly is easy due to the pre-cut nature, saving you stress and time.  A single pack covers a roof area approximately 280mm x 115mm, and includes three ridge strips as well as wider slates for the ends of every other run, to give an incredibly realistic finish with no fuss. - OO Scale

Scale Model Scenery Privy/Outhouse – Laser-cut kit (OO)

Privy/Outhouse – Laser-cut kit Based on many outhouses from the early 20th century, this versatile building uses a design found all over the UK enabling it to fit with any location or railway region. This building features our new red brick textures, specifically an English bond. With strips of tiles included, you can remove tiles and add extra weathering to make the condition to your liking. The door, door frame, wooden beams and toilet require painting before the kit is assembled which can be done with solvent or acrylic based paints. This kit is supplied with laser-cut parts for ease of assembly and comes with fully weathered paper wraps and roof slates to create a "Realistically Better" finish straight from the pack.  Features: Fully weathered photo-realistic red brick textures Lasercut MDF & Laserboard for easy and simple construction Interior details with painted brick and a toilet Pre-weathered & pre-cut roof slates included Door can be posed open or closed Dimensions: L: 23mm x W: 20mm x H: 33mm - OO Scale

Scale Model Scenery Polsue Barn – Laser-cut kit (OO)

Polsue Barn – Laser-cut kit A versatile barn/workshop building suitable for farm, railway or industrial use. Inspired by a building in Mevagissey, Cornwall. Suitable for both beginners and the more experienced modeller, this kit is cleverly designed - containing not one, not two, but THREE buildings in one! A barn/store, a workshop with double-width wooden doors, and an open lean-to. The three buildings can be positioned separately or all together as one (as shown). The kit contains interior and exterior wall wraps in our popular old stone texture - instantly transforming an ordinary wooden building into a property rich with character and history. The kit also includes slate roofing strips, corrugated iron roofing wraps, laser-cut windows and doors with engraved planks, hinges and locks. The small window is prototypically boarded up and the upper window can also be half-glazed if required. Doors and window frames require painting before the kit is assembled which can be done with solvent or acrylic based paints. We used a Plastikote Stone color for our test build which we then dry-brushed with burnt umber, white & slate grey artists acrylics to create a weathered wood look.  There's also plenty of scope for customisation too... with the slates being applied in individual strips it's easy to build it in either pristine or derelict condition (or anywhere in between), plus the optional steps at the end of the building can be omitted to give the appearance of them being demolished at some point, or to allow passing carts, lorries or wagons to be loaded via the side door. - OO Scale

Scale Model Scenery Pearce's Machine Shop – Laser-cut kit (OO)

Pearce's Machine Shop – Laser-cut kit A versatile workshop / machine shop building suitable for industrial, mining, farm or railway use. The design is typical of many buildings of this type that can still be seen all over the British Isles, with stone walls, slate roof & brick chimney. The walls are finished in our popular old stone texture, enabling it to fit in with any location or railway region but the kit also comes complete with a set of weathered red brick wraps should you prefer a brick finish. The kit is supplied with laser-cut parts for ease of assembly and comes with fully weathered paper wraps and roof slates, with no additional painting or weathering required for a "Realistically Better" finish straight from the pack.The windows & doors are supplied laser-cut from our eco-friendly laserboard and are packed with detail. Doors & window frames require painting before the kit is assembled which can be done with solvent or acrylic based paints. We used a Plastikote Stone colour for our test build which we then dry-brushed with burnt umber, white & slate grey artists acrylics to create a weathered wood look. There's also plenty of scope for customisation too... with the slates being applied in individual strips it's easy to build it in either pristine or derelict condition (or anywhere in between) . There's lots of detail on both door types including engraved planks, hinges and locks. The traditional casement style windows can be glazed with the kit packaging if desired. There's also the opportunity to build the kit without the chimney and with a choice of arched or square doors so you can easily customise it to suit your needs. Step-by-step instructions are included giving great results for modellers of all ages and abilities. Fully compatible with all model railway brands & buildings. Dimensions: L: 108mm x W: 63mm x H: 66mm - OO Scale

Scale Model Scenery Pigsty – Laser-cut kit (OO)

Pigsty – Laser-cut kit  This versatile pigsty building will fit right in to any farm or rural scene, with the option to build it with our popular old stone wall finish or aged red brick as can be seen in the photos above. The design is typical of many pigstys that can still be seen all over the British Isles, with stone/brick walls & slate roof. And we've even given it a prototypically uneven roofline for that added touch of realism to help it blend right in to your layout, just like the real thing. It'll look as if it's always been there! The kit is supplied with precision laser-cut parts for ease of assembly and includes fully weathered paper wraps and roof slates, with no additional painting or weathering of the walls or roof required for a "Realistically Better" finish straight from the pack. The doors, gates & downspouts are supplied laser-cut from our eco-friendly laserboard and are packed with detail including engraved planks, hinges and locks. These will require painting before assembly, but this can be done quickly and easily with acrylic paints. We used a Plastikote Stone color for our test build which we then dry-brushed with burnt sienna, white & slate grey artists acrylics to create a weathered wood look. The doors and gates can be posed open or closed during the assembly process enabling you to personalise the look and feel of the pigstys as desired. The pigsty building consists of three stys, each with their own small yards. Each of which has the choice of a fine gravel/dirt or slabbed finish which you can select during assembly. And although you'll probably never see them, we've included a complete set of interior wall wraps, should you wish to pose any of the doors open during assembly. There's also plenty of scope for customisation too... with the slates being applied in individual strips it's easy to build the pigstys in either pristine or derelict condition (or anywhere in between). Features: Fully weathered photo-realistic old stone or brick walls & roof slates - main structure requires no painting to acheive a realistically better finish Stone & brick wall interior detailing included Doors & gates can be posed open or closed MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 102 x W: 73mm x H: 41mm - OO Scale

Scale Model Scenery Old Dairy – Laser-cut kit (OO)

Old Dairy – Laser-cut kit  Based on a real old dairy building situated in Grampound, a little village between Truro and St Austell, this building will look at home on any layout regardless of the era or region you're modelling. The kit is supplied with pre-weathered paper texture wraps to give a realistically better finish straight from the packet. And components apart from the paper wraps are supplied pre-cut for ease of assembly. The windows & doors are supplied laser-cut from our eco-friendly laserboard and are loaded with lots detail including engraved planks, hinges and locks (separately applied - so they are tiny!). There's also a choice between a "slatted gate" style door for the arched doorway or a solid wooden arch topped door. Separately applied downpipes add an extra finishing touch. The building consists of two main "rooms": Main dairy / stores and the the lean-to to the left hand side. A full set of interior wraps are also included so you can pose any of the doors or shutters open should you wish. Doors & window frames on this OO gauge dairy kit require painting before the kit is assembled which can be done with solvent or acrylic based paints. We used a Plastikote Stone colour which we then dry-brushed with burnt sienna, white & slate grey artists acrylics to create a weathered wood look. There is an abundance of opportunities for customization with this oo gauge building kit. The slates are applied in individual strips, making it effortless to construct a pristine or derelict appearance, or anything in between. Features: Fully weathered photo-realistic old stone walls & roof slates - main structure requires no painting to acheive a realistically better finish Stone wall interior detailing included Doors can be posed open or closed MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 102mm x W: 56mm x H: 80mm  - OO Scale

Scale Model Scenery Outbuilding/Workshop – Laser-cut kit (OO)

Outbuilding/Workshop – Laser-cut kit Based on an a real-life building close to our headquarters, this versatile building can be assembled as either a pristine building, derelict, or anywhere in between, in a similar manner to our Barn kit and has lots of scope for kit-bashing. Supplied with a choice of stone and brick exterior and interior wraps and our new pre-weathered laser cut roof tiles, this kit enables you to build a very realistic outbuilding for your model railway layout or diecast diorama. Can be used alongside our barn kit, or as a standalone building in a goods yard, farm, builders yard...There are so many options for this kit. It could be the offices for a builders merchant or timber yard... anything! Hang an AX147-OO Lifebuoy on the wall and it's perfect for a harbour office! It also works as a small bungalow / bothy for layouts set in the highlands, moorland or Peak District too. The model features lots of laser cut detail including roof trusses, roof slates & fully detailed doors & windows (which can be glazed with a little piece of the kit packaging). Doors & windows require painting which can be done with solvent or acrylic based paints. Step-by-step instructions are included giving great results for modellers of all ages and abilities. - OO Scale

Scale Model Scenery Lightly Weathered Roof Slates – Laser-cut kit (OO)

Lightly Weathered Roof Slates – Laser-cut kit An A4 sheet of lightly weathered, laser cut roof slates, ready to apply to the roofs of your model buildings. These laser cut, pre-weathered slate strips are the fastest way for the discerning modeller to create a realistic roof on a model building. No painting or weathering required. Simply release the strips from the card sheet, trim & glue into place... Job done! A single pack covers a roof area approximately 280mm x 115mm, and includes three ridge strips as well as wider slates for the ends of every other run, to give an incredibly realistic finish with no fuss. Key Features: Pre-weathered finish, with lichen & moss effect. Three rows of ridge tiles Extra-wide slates for the ends of every other row. Perfect for any OO / 1:76 / 4mm model railway layout or diorama. Compatible with all makes of OO gauge model railway. Supplied with easy to follow instructions, in a cellophane packet.. Area covered by a single pack approx: 280mm x 115mm Individual strip length: 280mm - OO Scale

Scale Model Scenery Jack's Hut – Laser-cut kit (OO)

Jack's Hut – Laser-cut kit Jack's Hut is a versatile, small, brick-built hut for enhancing industrial, dockside & railway scenes on your model railway layouts and diecast dioramas. Based on a small lean-to type hut at the end of Charlestown Harbour in Cornwall, it's a simple design with a million and one uses. And with its simple, sloped roof it works as both as standalone building, or as a lean-to at the side of a larger building, like Tony's Cart Shed or Wright's Lockup. Supplied with white painted (heavily weathered) brick and plain red brick finishes, Jack's hut will fit in to pretty much any scene. Need a small weighbridge hut? This is just the job! Harbour office? You got it! The roof features heavily weathered cement board/asbestos style corrugated roof with lots of moss, lichen and general weathering, and for a more modern touch, there's also a steel security grille supplied to fit over the door to keep the hooligans out. The kit is supplied with laser-cut parts for ease of assembly with no additional painting or weathering required for a "Realistically Better" finish straight from the pack apart from the window, door & laserboard parts, which can be quickly and easily painted & weathered with acrylic paints. The hut also features white painted red brick interior wall finishes with flaking paint and other dirt & grime. Doors & window frames require painting before the kit is assembled which can be done with solvent or acrylic based paints. We used a a matt white acrylic primer for our doors and windowframes which we then dry-brushed with burnt umber, buff & slate grey artists acrylics to create a weathered wood look. Additional detail is then added to finish the building with downspouts & bargeboards. All of which are optional so you can choose the level of detail you wish to have on your hut. Dimensions L: 54mm x W: 30mm x H: 47mm - OO Scale

Scale Model Scenery Humpback Bridge – Laser-cut kit (OO)

Humpback Bridge – Laser-cut kit Based on a universal stone humpback bridge design commonly seen through the UK on country lanes, minor roads, bridleways and paths, with beautifully curved walls and deck this humpback bridge kit is perfect for steam era and modern image layouts alike. The bridge is very simple to construct with flexible MDF cores giving you prototypically correct curved walls (yes, they are very flexible and easy to shape, with no tools or sanding required) and full colour, photo-realistic stone texture wraps for an incredibly realistic appearance. Once constructed there are no visible & unsightly cut card or wood edges, which means this kit will look at home on a layout next to resin or card buildings. The road bed supplied with the bridge extends approx 50mm from either side of the bridge to enable you to blend the bridge into your layout quickly and easily. Also included are additional strips of country road texture which can be used to extend the road sections further. Features: Fully weathered finish for excellent realism - No painting needed Photo-realistic stone textured walls, arch and road Very easy to assemble with flexible MDF cores No visible edges when complete MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 150mm x W: 58mm x H: 35mm Height to centre of arch: approx 18mm - OO Scale

Scale Model Scenery Farm Machinery/Tractor Store – Laser-cut kit (OO)

Farm Machinery/Tractor Store – Laser-cut kit Based on a number of real examples around the UK this versatile Farm Machinery / Tractor Store & Workshop kit can be assembled as either a pristine building, derelict, or anywhere in between and has lots of scope for kit-bashing, Supplied with a choice of brick & stone paper wraps for the walls plus laser-cut pre-weathered roof slates, optional gates, windows & doors you can really go to town customising this kit to fit perfectly into your layout. Can be used as a tractor / machinery store, fit the gates to the front to use as a shelter for sheep & lambs, pigs or calves etc. It's also perfect for industrial scenes too and could even be converted into a blacksmiths! There are so many options for this kit. The model features lots of laser cut detail including roof trusses, roof slates & fully detailed windows and doors for a very realistic finish once assembled. Doors, window frames, fascias & bargeboards require painting which can be done with solvent or acrylic based paints. Features: Fully weathered finish for excellent realism (roof slates & doors supplied unpainted) Choice of Stone or Brick finish included Photo-realistic Interior & Exterior Texture Wraps - main structure requires no painting to achieve a realistic finish MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 172mm x W: 72mm x H: 73mm - OO Scale

Scale Model Scenery Farmhouse – Laser-cut kit (OO)

Farmhouse – Laser-cut kit Based on a number of real examples around the UK this versatile OO gauge farm house kit can be assembled as either a pristine building, derelict, or anywhere in between and has lots of scope for kit-bashing Supplied with a choice of brick & stone paper wraps for the walls plus laser-cut pre-weathered roof slates, and super-realistic windows & doors you can really go to town customising this OO gauge farm house to fit perfectly into your layout. A detailed front doorway adds an extra level of realism to our OO gauge farm house kit, creating a grand entrance to the farm house, and the rear porch gives the farmer somewhere to remove his filthy wellington boots before he enters the main house. The model features lots of laser cut detail including roof slates & fully detailed windows and doors for a very realistic finish once assembled. Doors, window frames, guttering, front porch surround and chimney tops require painting before the kit is assembled which can be done with solvent or acrylic based paints. - OO Scale

Scale Model Scenery Five Bar Gates (Pack of 3) – Laser-cut kit (OO)

Five Bar Gates (Pack of 3) – Laser-cut kit  A pack of 3, easy to assemble farm style five bar gates with a wide range of uses on your OO scale model railway layout.  Features: simple, layered construction kit A single pack builds 3 gates & 6 posts natural weathered wood appearance for added realism Pose the gates in open or closed positions as required Step by step instructions included Gates can be further enhanced with weathering powders & acrylic paints as required W: 44 x H: 18 x D: 2mm (Each gate) - OO Scale

Scale Model Scenery Garden Sheds – Laser-cut kit (2Pk) (OO)

Garden Sheds – Laser-cut kit A laser-cut model kit to build two small OO gauge garden sheds for allotments and garden scenes on your model railway layout or diecast diorama. Easy to assemble with full instructions supplied. Can be painted and weathered as required with acrylic paints or real wood stain / preserver. Features engraved detail for ship-lap cladding, hinges and lock. Printed paper felt texture for roof also included.  Features: Kit builds two sheds Dimensions: L: 26mm x W: 22mm x H: 27mm Step By Step Photographic instructions included Deluxe Materials Laser Cut Kit Glue recommended - OO Scale

Scale Model Scenery Derelict Barn – Laser-cut kit (OO)

Derelict Barn – Laser-cut kit Based on the many derelict barns in fields in every corner of the UK, this versatile Barn / Store kit can be assembled as either a pristine building, derelict, or anywhere in between and has lots of scope for kit-bashing. Supplied with a choice of sliding door, hinged door or solid wall, you can mix and match the components to suit your requirements. Can be used as a farm barn / store, goods store in a small freight yard, derelict building as part of an industrial development / scene... There are so many options for this kit. Supplied with a choice of weathered Stone & Brick paper wrapped wall finishes, the model features lots of laser cut detail including roof trusses, roof slates & fully detailed sliding door with rollers etc for an incredibly realistic finish. Features: Fully weathered finish for excellent realism (doors supplied unpainted) Choice of Stone or Brick finish included Assemble with a choice of doors (hinged or sliding) No visible edges when complete Photo-realistic Texture Wraps - Printed onto high-quality matt photo paper MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 70mm x W: 50mm x H: 62mm - OO Scale

Scale Model Scenery Dutch Barn – Laser-cut kit (OO)

Dutch Barn – Laser-cut kit A versatile OO gauge dutch barn laser cut building kit, suitable for any farm scene on your OO scale model railway layout or can be repurposed as a saw mill, stores or goods shed for railway or industrial use. The design is typical of steel framed Dutch Barns seen all over the British Isles, with detailed steel frame and rusty, black painted corrugated iron. Based on a real Dutch Barn down on the Roseland, not far from our factory, this barn captures the essence of a traditional barn that's been exposed to the elements for many years. The walls of the OO gauge barn are finished with our unique TX104-OO rusty, painted corrugated iron texture for a realistically better finish straight from the pack. And the base is wrapped in weathered concrete paper. All textures are supplied pre-weathered, only the framework will need painting & weathering. We used a dark brown acrylic spray then brushed it over with rust coloured weathering powder while the paint was still a little tacky. And components apart from the paper wraps are supplied pre-cut for ease of assembly. The barn isn't really suitable for a beginner as there are some small, delicate parts. But if you take your time with the assembly you will be rewarded with a very detailed building once complete. There is an abundance of opportunities for customization with this oo gauge building kit. You can leave either end wall off, leaving one side and one end open for a more derelict look (or more accessible stores / saw mill building). Features Fully weathered photo-realistic rusty black painted corrugated iron walls for a realistically better finish Unpainted, weathered corrugated iron interior finish MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 190mm x W: 88mm x H: 86mm  - OO Scale

Scale Model Scenery Coach House & Stables – Laser-cut kit (OO)

Coach House & Stables – Laser-cut kit This OO gauge coach house & stables laser cut building kit is ideal for virtually any era model railway layout or 1:76 scale diecast diorama. Ideal for rural and country scenes as a coach house, or it can of course be repurposed as an industrial building or even as a dockside fisherman's cottage with attached boat storage and net loft. It's really up to you how you use it and the options are endless. The coach house & stables features lots of detail such as hinge overlays on the doors, layered, glazed windows, pre-weathered roof slates, painted white stone wall wraps with brick arches. Soot stained chimneys and separately applied drainpipes complete the realistically better finish. There's even the prototypical uneven roofline, just like you see on many older buildings constructed with detailed roof trusses for authenticity. The roof slates are cut to length and pre-weathered with lots of lichen and staining. Simply glue them on to the marked trusses to create a super-realistic roof. The central larger carriage store is separated from the stables & accommodation via internal walls. These sections also feature a floor between the ground floor and the upper floor, allowing you to go to town with interior detailing on these sections. No interior wraps are supplied for these sections. We've also included an optional solid wooden door which you can use in place of the stable door, making it more suitable for use as an industrial workshop with store room and office. Or fisherman's cottage with workshop/boat store and net loft. The kit is straightforward to assemble with paper texture wraps over a series of MDF base layers which leave no unsightly joints visible when construction is complete. As with many of our kits, there are some small, delicate parts in the kit, so tweezers are definitely recommended.  You will need to paint the doors, windows, guttering and downpipes etc as these are supplied unpainted. Artists acrylic paints or "rattle can" spray paints are recommended prior to assembly. Some of the larger unpainted parts can be easily coloured with a simple permanent marker. Features: Fully weathered finish for a Realistically Better finish Laser cut MDF core parts for quick and easy construction Weathered whitewashed walls & pre-weathered roof slates No visible cut edges when complete Step by Step photographic instructions included. Full colour texture layers printed onto 100gsm photo-quality laser paper Dimensions: L:193mm x W: 70mm x H: 100mm Main double doorway opening dimensions: W: 36mm  X H (side of doorway): 38mm X H (to top of the center arch) 42mm - OO Scale

Scale Model Scenery 4ft Post & Rail Fencing – Laser-cut kit (OO)

4ft Post & Rail Fencing – Laser-cut kit Every model railway layout needs lineside fencing in various forms and our LX006-OO 4ft Post & Rail fencing makes an ideal, Realistically Better choice. With it's natural weathered wood finish straight from the pack, built-in flexibility and generous pack length you can create true-to-life lineside scenes with ease. Whether it's around the perimeter of farmland, along side the railway line, or along the side of a road, this fencing makes an ideal choice. All parts are laser cut, meaning construction is quick and easy and the finished fencing can be further enhanced with weathering powders and acrylic paints if required. Each pack contains 108cm of fencing Features: made from recycled cardboard (grey/weathered finish) or laserboard (brown/pristine finish) which has a natural wood finish. You can leave them as they are or paint them! You only need a knife to gently release the parts from the sheet, all cutting is done for you! Simple assembly and can be glued directly to your baseboard. Will even work up and down gentle inclines and embankments. Durable - The simple, sturdy, layered construction makes for a durable model once assembled. Perfect for any OO / 1:76 / 4mm model railway layout or diorama. L: 108cm x H: 16mm (installed fence height) x D: 3mm - OO Scale

Scale Model Scenery 1960's Domestic Garage – Laser-cut kit (OO)

1960's Domestic Garage – Laser-cut kit  A versatile 1960's style garage for detailing street scenes on your model railway layouts and diecast dioramas. The design is typical of many garages of this type that can still be seen all over the British Isles in various states of repair. Supplied with a choice of red brick & pebbledashed walls. Both finishes feature plenty of weathering for a worn & well-used finish. The roof features heavily weathered cement board/asbestos style corrugated roof with lots of moss, lichen and general weathering, plus a nicely rusted ridge strip. The kit is supplied with laser-cut parts for ease of assembly with no additional painting or weathering required for a "Realistically Better" finish straight from the pack apart from the windows, doors & laserboard parts, which can be quickly and easily painted & weathered with acrylic paints. The garage also features white painted red brick interior wall finishes with flaking paint and other dirt & grime. For a little extra detail we've also included two car tyres and a ladder which can be used to add extra interest to the scene. Doors & window frames require painting before the kit is assembled which can be done with solvent or acrylic based paints. We used a a matt white acrylic primer for our doors and windowframes which we then dry-brushed with burnt umber, buff & slate grey artists acrylics to create a weathered wood look. Additional detail is then added to finish the building with downspouts & bargeboards. Dimensions L: 73mm x W: 41mm x H: 42mm - OO Scale

Scale Model Scenery 3ft x 2ft Paving Slabs – Laser-cut kit (OO)

3ft x 2ft Paving Slabs – Laser-cut kit A quick and easy way to create a slabbed pavement, patio or pedestrian area on your layout with a 3ft x 2ft paving slab effect. Can be easily painted and weathered with acrylic brush or spray paints and weathering powders etc. Also suitable for use with LX213-OO Platform Edging. Features: Engraved 0.8mm thick laserboard sheet Perfect for any era OO / 1:76 / 4mm model railway layout or diorama Compatible with all makes of OO gauge model railway Dimensions: L: 272mm x W: 144mm x H: 0.8mm Supplied unpainted - OO Scale

Dapol Class 57xx Pannier 9669 BR Black Late Crest (O)

Class 57xx Pannier 9669 BR Late Crest The 5700 class were introduced in 1929, whilst the 8750 class followed in 1933 and by 1950 863 locomotives had been constructed, making this perhaps the most successful 0-6-0. G.W.R. Classification: Group C, Route Blue, changed to yellow under B.R. B.R. Classification: 3F. Designed for shunting and short freight workings, however it soon became clear that other duties could be performed such as branch passenger working and mainline freight, being widespread across the system. The 8750 class can be distinguished from the 5700 class by the totally enclosed larger cab. Whistle shields and bunker steps with handrails were added from 1936. A new water feed was introduced in 1942 with the clack valves being fitted inside a case on top of the boiler in front of the dome, which became standard for builds after 1944. Between 1956 and 1963, thirteen 5700 locomotives were sold to the London Transport being painted in the attractive lined red livery. The NCB bought five 5700 locomotives between 1959 and 1965, with number 7754 still working in 1975. Last of class withdrawn: 1966. Preserved examples: 3650, 3738, 4612, 5764/L95, 5775/L89, 5786/L92, 7714, 7715/L99, 7752/L94, 7754, 7760/L90, 9600, 9629, 9642, 9681, 9682 Features of the 57XX & 8750 include: Diecast Chassis and footplate for excellent adhesion and pulling power Powerful 5 pole motor providing fine power control Beautifully detailed body with correct body type variations applied where relevant with many separately added details Partial representation of working inside motion and many other exquisite fine details including: Four cabs for original 57XX, Later 57XX, 8750 Collett cab and London Transport cab Sprung Buffers Removable roof, secured with magnets for ease of fitting engine crew Working cab doors, where fitted Flickering fire box glow Ash pan with correct double brake rodding Expertly applied livery Wheels conform to the new O Gauge standard, suitable for O Super Fine DCC Ready with a 21 pin decoder socket - O Scale

Scenecraft Sectional Lineside Hut - Red Door (N)

Sectional Lineside Hut - Red Door The Sectional Lineside Hut with red door is the perfect addition to any lineside scene, providing permanent way works with a place to rest and shelter from the elements, or store the tools needed to undertake their maintenance duties. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing, making it perfect for use with Woodland Scenics JustPlug lighting! - N Scale

Scenecraft Narrow Gauge (NG7) Corrugated Engine Shed

Narrow Gauge (NG7) Corrugated Engine Shed The beauty of many narrow gauge railways is that they could be set up in a matter of weeks, allowing changes to lines or infrastructure – or the moving of the entire railway in the case of the wartime trench railway systems – with little or no notice. As a result, many of the buildings used on narrow gauge lines were relatively simple in their concept and this Corrugated Engine Shed is testament to that. With its corrugated sides and roof and two doors bolted on, this would have been a quick and cheap structure to build – and take down again too, if the requirement ever arose – whilst still providing much needed shelter for the locomotives it housed. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - O-16.5 (NG7) Scale

Scenecraft Narrow Gauge (NG7) Metal Water Tank

Narrow Gauge (NG7) Metal Water Tank This metal water tank plays an essential role in the operation of any steam-worked railway, the provision of water. With a lattice base holding the metal tank above, water is supplied via gravity through a hose connected to the tank – the valve for which is chain operated and on the Scenecraft model, this feature is replicated with real metal chain. Whatever the setting, this model is vital to keep your Bachmann Narrow Gauge steam locomotives watered and ready for service. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - O-16.5 (NG7) Scale

Scenecraft Sectional Lineside Hut - Blue Door (N)

Sectional Lineside Hut - Blue Door The Sectional Lineside Hut with blue door is the perfect addition to any lineside scene, providing permanent way works with a place to rest and shelter from the elements, or store the tools needed to undertake their maintenance duties. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing, making it perfect for use with Woodland Scenics JustPlug lighting! - N Scale

Scenecraft Low Relief Rear Of Terrace - Left Hand, Yellow Door (N)

Low Relief Rear Of Terrace - Left Hand, Yellow Door Terraced houses are common through much of the UK and these low relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. Houses like these often backed on to railway tracks, making this model particularly suited to creating a backdrop that is in close proximity to the track. This model is designed to work alongside the other Low Relief Terrace models in the Scenecraft range and can be combined with other models to create a realistic scene Features: Low Relief Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting! - N Scale

Scenecraft Low Relief Rear Of Terrace - Right Hand, Blue Door (N)

Low Relief Rear Of Terrace - Right Hand, Blue Door  Terraced houses are common through much of the UK and these low relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. Houses like these often backed on to railway tracks, making this model particularly suited to creating a backdrop that is in close proximity to the track. This model is designed to work alongside the other Low Relief Terrace models in the Scenecraft range and can be combined with other models to create a realistic scene Features: Low Relief Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting! - N Scale

Scenecraft Low Relief Rear Of Terrace - Right Hand, Green Door (N)

Low Relief Rear Of Terrace - Right Hand, Green Door Terraced houses are common through much of the UK and these low relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. Houses like these often backed on to railway tracks, making this model particularly suited to creating a backdrop that is in close proximity to the track. This model is designed to work alongside the other Low Relief Terrace models in the Scenecraft range and can be combined with other models to create a realistic scene Features: Low Relief Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting! - N Scale

Scenecraft Low Relief Rear Of Terrace - Left Hand, White Door (N)

Low Relief Rear Of Terrace - Left Hand, White Door Terraced houses are common through much of the UK and these low relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. Houses like these often backed on to railway tracks, making this model particularly suited to creating a backdrop that is in close proximity to the track. This model is designed to work alongside the other Low Relief Terrace models in the Scenecraft range and can be combined with other models to create a realistic scene Features: Low Relief Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting! - N Scale

Scenecraft Highley Station Yard Crane (N)

Highley Station Yard Crane The Yard Crane is a staple of any goods yard, providing lifting power to transfer goods and other heavy loads to and from rail and road wagons – ready for the onward journey wherever they may be destined. Found in goods yards across the UK, often in multiples to ensure that loads could be transferred without delay, cranes like this were also common sights at docks or any other industrial site where transhipment may be required. This model depicts the crane found at Highley Station on the Severn Valley Railway, and is finished in typical Great Western Railway colours. Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - N Scale

Scenecraft Rail Yard Crewroom - Red

Rail Yard Crewroom - Red The Rail Yard Crewroom is a typical post-war design, where purpose and efficiency often came before appearance, and provides the ideal space for your OO scale rail crew to take a well earnt brake. Not limited to depots and shed scenes, this structure with its red windows and doors is just as suited to goods yards, carriage sidings, or could even serve away from the railway as an industrial gatehouse for example. Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting! - OO Scale

Scenecraft Newsagent Platform Kiosk - Blue 'WHSmith'

Newsagent Platform Kiosk - Blue Any station worth stopping at should provide passengers with somewhere to grab a good read and refreshments for the journey ahead, and whilst some locations offered a shop within the station building complex, many relied on standalone kiosks to provide the latest news and light snacks and drinks. If you want to give your miniature passengers the same amenities, then look no further than this Scenecraft model to do the job! Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - OO Scale

Scenecraft Newsagent Platform Kiosk - Orange & Brown 'WHSmith'

Newsagent Platform Kiosk - Orange & Brown Any station worth stopping at should provide passengers with somewhere to grab a good read and refreshments for the journey ahead, and whilst some locations offered a shop within the station building complex, many relied on standalone kiosks to provide the latest news and light snacks and drinks. If you want to give your miniature passengers the same amenities, then look no further than this Scenecraft model to do the job! Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - OO Scale

Scenecraft Narrow Gauge (OO9) Signal Cabin - Brown

Narrow Gauge (OO9) Signal Cabin - Brown In the days before railway signalling became controlled from centralised locations, many railway stations would have small signal boxes situated in places where only a small number of levers are required. This Narrow Gauge Signal Cabin model from Scenecraft is decorated in cream with brown highlights and is suitable for use on layouts depicting both OO9 scale narrow gauge lines and OO scale standard gauge railway lines. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting - OO-9 Scale

Scenecraft GWR Standard Station - Blue & White

GWR Standard Station - Blue & White The Great Western Railway (GWR) employed standard designs not only for its locomotives and rolling stock, but also for many of the structures and infrastructure needed to run its railway network, none less so than its station buildings. This Scenecraft model is based on the building found at Toddington on the preserved Gloucestershire Warwickshire Steam Railway but buildings to the same design could be found across the GWR network. Indeed, some are still in use on the national network today and have had their woodwork and details painted into contemporary colours, like the blue and white scheme applied to this model which makes it ideal for layouts set in former GWR territory. Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting! - OO Scale

Scenecraft Concrete Footbridge - Blue

Concrete Footbridge - Blue This Scenecraft model depicts a Concrete Footbridge commonly used at railway stations across the country, making it suitable for layouts set in many areas and eras. Each flight of stairs has the first step painted yellow, a sign of the health and safety team at work, meanwhile handrails are individually painted as are the (non-functional) lighting gantries which on this model are decorated in blue. Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - OO Scale

Scenecraft Concrete Footbridge - Red

Concrete Footbridge - Red This Scenecraft model depicts a Concrete Footbridge commonly used at railway stations across the country, making it suitable for layouts set in many areas and eras. Each flight of stairs has the first step painted yellow, a sign of the health and safety team at work, meanwhile handrails are individually painted as are the (non-functional) lighting gantries which on this model are decorated in red. Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - OO Scale

Scenecraft Carriage Siding Walkways

Carriage Siding Walkways  Between services coaching stock is often stabled away from stations, freeing up platforms but in a place where cleaning and maintenance teams can do their work. Without the station platforms to provide staff with level access though, another solution is required. Enter the Carriage Siding Walkways which could be found in sidings at larger station complexes, or at carriage sheds and other maintenance locations. These wooden platforms give staff the easy access they need to board coaches and get them ready for their next passengers. Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - OO Scale

Hornby LNER Class A4 4498 'Sir Nigel Gresley' LNER Garter Blue (TT)

LNER Class A4 4498 'Sir Nigel Gresley' LNER Garter Blue Built at the Doncaster works in 1937, 4498 Sir Nigel Gresley entered service in October 1937 on the London and Northeast Railway.  This model represents the locomotive in 1930’s condition with full valances and in its classic Garter blue paint scheme. A HM7000-Next18 sound decoder can be fitted for digital control and realistic A4 Class sound effects using the free to download A4 sound profile. Specific to TT3043: A4 locomotive 4498 in Garter blue with ‘Sir Nigel Gresley’ Name plates. Single Chimney. Full valances. 1928 Corridor Tender. Common TT A4 Class Features: High detail TT Scale model based on extensive research including and original works drawings. Heavy diecast chassis. Model Weight is 150 grams. High precision coreless motor. Brass axle bearings. Locomotive and Tender wheel electrical pickups. Kinematic rear coupling system. Pre-fitted acoustic speaker chamber and Sugarcube speaker. Next-18 Decoder socket. Metal buffers. Separately fitted brass safety valves and whistle. Separately fitted metal handrails. Accessory bag contains optional fit flanged trailing track wheelset, vacuum pipes and couplings. - TT:120 Scale

Scenecraft Narrow Gauge (NG7) Corrugated Station Brown & Cream

Narrow Gauge (NG7) Corrugated Station Brown & Cream For many narrow gauge railways, moving passengers was a secondary consideration behind the freight traffic for which most lines had been built to transport. As such, facilities were often minimal meaning small and easy to build structures like this corrugated station were about as much as a traveller could expect as they waited for their train. Despite its narrow gauge origins, this model could serve equally well on a O scale layout or diorama where a small station or halt is required. MODEL FEATURES: NG7 Scale (use with O & O-16.5) Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting!

Scenecraft Narrow Gauge (NG7) Slate Built Workers Cottage

Narrow Gauge (NG7) Slate Built Workers Cottage The majority of buildings found in the UK are constructed from materials that are readily available in the local area, and so it’s no surprise that worker’s cottages were made from slate in places like Wales where the stone was found in abundance. Cottages like these could be found in and around slate quarries to provide miners with accommodation or equally could serve as the home of a railway worker. Whoever the occupants might be, this slate built cottage is the ideal addition to O or NG7 scale layouts or dioramas and can be used in conjunction with the other slate built models available from the Scenecraft range. MODEL FEATURES: NG7 Scale (use with O & O-16.5) Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting!

Scenecraft Narrow Gauge (NG7) Slate Footbridge

Narrow Gauge (NG7) Slate Footbridge Many narrow gauge railways were built to serve the slate industry, working through slate mines and quarries to aid workers in moving slate around the site during the extraction and finishing processes and then, once ready for sale, onwards to transhipment yards. Given the abundance of slate in these locations, the material was used to build much of the infrastructure needed to operate the railways, to the extent that even footbridges were built from slate to provide people with a safe route of passage over the line, particularly when the railway passed through public land on its route to a port or similar transhipment location. MODEL FEATURES: NG7 Scale Highly detailed, hand painted model Fully decorated and ready to place on your layout

Scenecraft Narrow Gauge (NG7) Tunnel Portal

Narrow Gauge (NG7) Tunnel Portal Many narrow gauge railways feature tunnels along their lines, making this Narrow Gauge Tunnel Portal an ideal solution for anyone trying to create a scenic break or an area of hidden track. Large enough to accommodate a single track, this model is both practical and visually appealing with its composition of grey slate and red brick – all of which is hand painted with a typical weathered appearance. MODEL FEATURES: NG7 Scale Highly detailed, hand painted model Fully decorated and ready to place on your layout

Bachmann LMS 20T Brake Van LMS (L M S) Grey '730037' (OO)

LMS 20T Brake Van LMS (L M S) Grey '730037' This new Bachmann Branchline model of the LMS Standard 20 Ton Brake Van sets a new standard for these iconic vehicles, of which 2,774 examples were built between 1935 and 1950, first by the London, Midland and Scottish Railway (LMS) and then by British Railways (BR) who recognised the merits of the LMS design. With an extensive tooling suite catering for many of the variations that were incorporated into the real vans during their construction and subsequent use, authentic models can be produced of brake vans in their early years when first entering traffic in the 1930s, to their final days in departmental use at the end of the twentieth century. Boasting a wealth of detail, from the separately fitted metal handrails to the individual brake components and cabin interior, the new Branchline models are fitted with blackened metal wheelsets and NEM coupling pockets, providing smooth running and operational versatility alongside their good looks. The icing on the cake is the livery application, with rich paintwork and authentic numbering and markings, completing this valuable addition to the extensive range of Branchline goods rolling stock. Features: Pristine LMS Grey (L M S) livery Running No. 730037 Model depicts a Diagram D1919 van with: Through Vacuum Pipes Shallow Guard Duckets Narrow Ducket Beading Rivetted End Panels Extended Buffers Shallow Ballast Weights Accessory Pack NEM Coupling Pockets Length 118mm (over couplings) - Era 3 - OO Scale

Bachmann LMS 20T Brake Van LMS Grey '730203' (OO)

LMS 20T Brake Van LMS Grey '730203' This new Bachmann Branchline model of the LMS Standard 20 Ton Brake Van sets a new standard for these iconic vehicles, of which 2,774 examples were built between 1935 and 1950, first by the London, Midland and Scottish Railway (LMS) and then by British Railways (BR) who recognised the merits of the LMS design. With an extensive tooling suite catering for many of the variations that were incorporated into the real vans during their construction and subsequent use, authentic models can be produced of brake vans in their early years when first entering traffic in the 1930s, to their final days in departmental use at the end of the twentieth century. Boasting a wealth of detail, from the separately fitted metal handrails to the individual brake components and cabin interior, the new Branchline models are fitted with blackened metal wheelsets and NEM coupling pockets, providing smooth running and operational versatility alongside their good looks. The icing on the cake is the livery application, with rich paintwork and authentic numbering and markings, completing this valuable addition to the extensive range of Branchline goods rolling stock. Features: Pristine LMS Grey (LMS) livery Running No. 730203 Model depicts a Diagram D1919 van with: Through Vacuum Pipes Shallow Guard Duckets Narrow Ducket Beading Rivetted End Panels Extended Buffers Shallow Ballast Weights Accessory Pack NEM Coupling Pockets Length 118mm (over couplings) - Era 3 - OO Scale

Hornby PO 12T Tank 15345,15346 & 15347 Royal Daylight Triple Pack (TT)

PO 12t Tank 15345,15346 & 15347 Royal Daylight Triple Pack This Royal Daylight 12-ton tank wagon triple-pack brings classic fuel transport to your TT:120 layout. Finished in black with authentic branding, each wagon features fine detailing and unique running numbers 15345, 15346, and 15347 for added realism. A perfect addition to any steam or early diesel-era freight collection. - TT:120 Scale