Accurascale BR Mk2C FK M13520 Blue/Grey InterCity (OO)

BR Mk2C FK M13520 Blue/Grey InterCity (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C FK M13527 Provincial Trans-Pennine (OO)

BR Mk2C FK M13527 Provincial Trans-Pennine (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5505 Regional Railways (OO)

BR Mk2C TSO 5505 Regional Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5520 Provincial (Unbranded) (OO)

BR Mk2C TSO 5520 Provincial (Unbranded) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5525 Network SouthEast (OO)

BR Mk2C TSO 5525 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5569 Maroon (South Wales & West) (OO)

BR Mk2C TSO 5569 Maroon (South Wales & West) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO M5561 Blue/Grey InterCity (OO)

BR Mk2C TSO M5561 Blue/Grey InterCity (OO)Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) 6501 Network SouthEast (OO)

BR Mk2C TSO(T) 6501 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO)

BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C FK 13514 Network SouthEast (OO)

BR Mk2C FK 13514 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BFK 17120 Network SouthEast w/ WoE Route Branding (OO)

BR Mk2C BFK 17120 Network SouthEast w/ WoE Route Branding (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BFK IC17177C InterCity Executive (OO)

BR Mk2C BFK IC17177C InterCity Executive (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSK (exBFK) 35506 Regional Railways (OO)

BR Mk2C BSK (exBFK) 35506 Regional Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSK (exBFK) 35508 West Coast Railways (OO)

BR Mk2C BSK (exBFK) 35508 West Coast Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSO 9440 South Wales & West Blue (OO)

BR Mk2C BSO 9440 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5453 South Wales & West Blue (OO)

BR Mk2B TSO 5453 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5463 Maroon (South Wales & West) (OO)

BR Mk2B TSO 5463 Maroon (South Wales & West) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5491 South Wales & West Blue (OO)

BR Mk2B TSO 5491 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Scenecraft Midland Water Crane (Platform Mounted) (OO)

Midland Water Crane (Platform Mounted) Steam locomotives can only produce steam if they have water, so the railway network was awash with water towers, tanks and cranes during the steam age. Whilst many locomotives would take water on shed or whilst stabled between duties, some stations boasted Water Cranes mounted at the ends of platforms allowing locomotives to top up during station stops with little or no disruption to services. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - OO scale

Hornby Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke)

Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke) This highly detailed model represents famed 'Spam Can' No.35028 ‘Clan Line’ in British Railways lined green livery with early cycling lion emblem on the tender. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis, pony truck and trailing truck Die-cast connecting rods and valve gear High detail cab and fully decorated backhead with decorated instrument dials Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels 8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible DCC Sound: Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of Merchant Navy locomotives Tender speaker Livery: BR Lined Green with ‘Cycling Lion’ early emblem on tender Clan Line etched nameplates Semi-gloss finish Accurate colours and fonts - OO Scale

Hornby LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke)

LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60002 ‘Sir Murrough Wilson’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights. This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any early British Railways model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Non-Corridor Tender Side valence removed Livery: BR Lined Green Named ‘Sir Murrough Wilson’ Cycling Lion on tender Accurate colours and fonts - OO Scale

Hornby LNER A4 60024 'Kingfisher' BR Exp. Ultramarine (Sound/Smoke)

LNER A4 60024 'Kingfisher' BR Experimental Ultramarine (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60024 ‘Kingfisher’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights.  This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any LNER model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Corridor Tender Side valence removed Livery: BR Express Blue Named ‘Kingfisher’ British Railways lettering on tender Accurate colours and fonts - OO Scale

Hornby GWR Saint 2980 'Coeur de Lion' GWR Lined Green (Sound/Smoke)

GWR Saint 2980 'Coeur de Lion' GWR Lined Green (Sound/Smoke) We are delighted to present the next run of OO Gauge GWR Saint Class locomotives in this months range launch, with this particular example being No. 2980 ‘Coeur de Lion’ in Great Western lined green. Utilising the same highly acclaimed tooling used on the first run of Saints last year, this latest release takes the model one step further by the inclusion of a DCC Sound decoder and speaker, 2nd generation steam generator, and revised cab footplate for improved running. Model Specification: High detail OO Gauge model based on extensive research and original works drawings Die-cast Chassis and Running Plate. Model Weight is 341 grams High detail cab and fully decorated backhead with decorated instrument dials Etched metal nameplates Powerful 5 Pole Skew wound motor Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast Piston Rods & valve gear Fully decorated crew figures Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and Rear NEM coupling pocket Separately fitted lamps. Lamp code can be changed Separately fitted simulated coal load Improved cab footplate design Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: 21-Pin DCC Sound decoder pre-fitted HM7000 Power Bank compatible Illuminated flickering firebox DCC Sound: Pre-installed Saint Class sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of Saint Class locomotives Tender speaker Tooling: Tall Chimney Later safety valve with Top Feeds Later curved footplate Fluted piston rods Superheated boiler Collett Tender Livery: GWR Lined Green Great Western tender lettering Accurate colours and fonts - OO Scale

Hornby A1X 'Terrier' 643 LB&SCR Marsh Brown

A1X 'Terrier' 643 LB&SCR Marsh Brown The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.643 in London Brighton & South Coast Railway Marsh Brown. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes Small cab bunker with no coal rails Westinghouse pump Livery: LB&SCR Marsh Brown Accurate colours and typefaces - OO Scale

Hornby A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company

A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.72 ‘Fenchurch’ in Newhaven Harbour Company lined black. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Rivetted smokebox door Six lamp brackets on front and rear  Low bufferstock with lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump Livery: Newhaven Harbour Company lined black Accurate colours and typefaces - OO Scale

Hornby Playtrains: Harry Potter Hogwarts Express Train (w/ Steam)

Playtrains: Harry Potter Hogwarts Express Train (w/ Steam) Bring the magic to life with the Hogwarts Castle steam engine – the locomotive that pulls the Hogwarts Express on its unforgettable journey to Hogwarts School.  Inspired by the beloved world of Harry Potter, this feature-packed toy steam engine adds excitement, realism and plenty of “wow” moments to your child’s railway adventures. Safe, water-based vapour gently puffs from the chimney to create a realistic steam effect, giving young witches and wizards the thrill of a real steam train without any of the worry.  With authentic train sounds and a working front light, the engine makes every departure feel just like it does in the films. Designed for children aged 5–8, it’s robust, engaging and compatible with other Hornby Playtrains toys. The locomotive is battery powered (4 x AA batteries required). It operates using an IR hand controller (sold separately R7407), making it easy for children to take control of their very own magical journey.  A wonderful way to enhance their Hogwarts Express experience, this steam engine brings storytelling, independence and spellbinding fun together in one truly magical addition.

Hornby Playtrains: "Blue Ranger" Steam Train (w/ Steam)

Playtrains: "Blue Ranger" Steam Train (w/ Steam) Meet Blue Ranger – the blue steam engine ready to take your child on their next big Playtrains adventure! Playtrains is designed especially for children aged 5–8, Blue Ranger captures all the excitement of a real passenger express train in a fun, child-friendly way. Finished in a striking blue livery and named Blue Ranger, this eye-catching locomotive is built to inspire imaginative journeys around your home.  What makes it truly magical is the realistic steam effect. Simply add water and watch safe, vapourised mist gently puff from the chimney – giving all the drama of a real steam train, with complete peace of mind for parents.  Add in authentic train sounds and a working front headlight, and every journey feels even more lifelike. Blue Ranger is battery powered (4 x AA batteries required). It’s operated using an easy-to-use IR hand controller (sold separately R7407), perfectly suited to small hands and growing confidence.  As your child’s railway world expands, Blue Ranger is fully compatible with the Playtrains Steam Train Coach Pack R9373 and other Playtrains toys, making it simple to add more coaches and create a longer, grander express. Big adventures start with one engine — and Blue Ranger is ready to lead the way.  

Rapido UK MR 483 No.40557 BR Black (Late)

MR 483 No.40557 BR Black (Late) No. 40557 BR late crest unlined black Stanier short chimney Short dome Ross Pop safety valves LMS modified body style Exhaust injector Circular valve seat Rivetted smokebox LMS simplified bogie Round tender water dome 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale

Rapido UK MR 483 No.483 Midland Railway Crimson (Sound Fitted)

MR 483 No.483 Midland Railway Crimson (Sound Fitted) No. 483 Midland Railway crimson Capuchon chimney Tall dome Ramsbottom safety valves As rebuilt body style Oval valve seat Flush smokebox Superheater damper fitted As rebuilt bogie Square tender water dome 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale

Rapido UK MR 483 No.502 Midland Railway Royal Train

MR 483 No.502 Midland Railway Royal Train No. 502 Midland Railway Royal Train livery Capuchon chimney Tall dome Ramsbottom safety valves As rebuilt body style Oval valve seat Flush smokebox Superheater damper fitted As rebuilt bogie Square tender water dome 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale

Rapido UK MR 483 No.40419 BRITISH RAILWAYS Lined Black

MR 483 No.40419 BRITISH RAILWAYS Lined Black No. 40419 BRITISH RAILWAYS lined black Stanier short chimney Short dome Ross Pop safety valves LMS modified body style Exhaust injector Circular valve seat Rivetted dmokebox LMS simplified bogie Round tender water dome 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale

Rapido UK MR 483 No.40419 BRITISH RAILWAYS Lined Black (Sound Fitted)

MR 483 No.40419 BRITISH RAILWAYS Lined Black (Sound Fitted) No. 40419 BRITISH RAILWAYS lined black Stanier short chimney Short dome Ross Pop safety valves LMS modified body style Exhaust injector Circular valve seat Rivetted dmokebox LMS simplified bogie Round tender water dome 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale

Rapido UK MR 483 No.40527 BR Black (Early)

MR 483 No.40527 BR Black (Early) No. 40527 BR early crest plain black Stanier short chimney Short dome Ross Pop safety valves LMS modified body style Exhaust injector Circular valve seat Rivetted smokebox LMS simplified bogie Round tender water dome 21-pin decoder socket Sprung buffers NEM coupling pockets Factory fitted speaker Smooth & powerful mechanism Lots of separately fitted parts - OO Scale  

Bachmann LMS Ivatt 2MT 46464 BR Lined Black (Early) (Preserved)

LMS Ivatt 2MT 46464 BR Lined Black (Early) (Preserved)  Ivatt’s 2MT ‘Mogul’ 2-6-0 Tender Locomotives were popular, go-anywhere engines which served the LMS and BR for two decades and across a wide area, making this Bachmann Branchline model a great choice for many modellers wishing to depict the steam age or preservation, as the type remains strongly represented today. The Branchline model of Ivatt’s 2-6-0 mogul employs a diecast running plate and locomotive chassis to provide an impressive weight, ensuring that the model’s performance matches that of the prototype. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails and lamp irons to the safety valves, whistle and sprung buffers, each of which are turned brass. Further details are added individually like the lubricators and sand boxes adorning the running plate and the brake blocks, brake rigging and metal wire sandpipes mounted to the chassis. Within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. Moving to the tender and two lengths of locomotive to tender drawbar are provided to suit different layout conditions whilst the tender itself is finely moulded, with several separately applied details including the lamp irons, handrails, handwheels and sprung metal buffers. A realistic coal load is included, with the empty coal space modelled below, whilst the tender chassis includes brake rigging and the water scoop. The livery application is executed to the highest standard with the rich, uniform paintwork enhanced by the three-colour lining, emulating the BR lined black livery to full effect. Numbering, lettering and the BR Early Emblem is reproduced in high definition, resulting in a model fit for any collection. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Locomotive is Preserved Pristine BR Lined Black (Early Emblem) livery Running No. 46464 Long Tender Ladder and Fabricated Cab Footsteps Two lengths of Tender Drawbar Supplied Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 8 Pin DCC Decoder Socket – Recommend Decoder item No. 36-566A Length 226mm (over couplings) IVATT 2MT HISTORY Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network. With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today.

Bachmann LMS Ivatt 2MT 46521 BR Lined Green (Early) (Preserved)

LMS Ivatt 2MT 46521 BR Lined Green (Early) (Preserved) Ivatt’s 2MT ‘Mogul’ 2-6-0 Tender Locomotives were popular, go-anywhere engines which served the LMS and BR for two decades and across a wide area, making this Bachmann Branchline model a great choice for many modellers wishing to depict the steam age or preservation, as the type remains strongly represented today. The Branchline model of Ivatt’s 2-6-0 mogul employs a diecast running plate and locomotive chassis to provide an impressive weight, ensuring that the model’s performance matches that of the prototype. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails and lamp irons to the safety valves, whistle and sprung buffers, each of which are turned brass. Further details are added individually like the lubricators and sand boxes adorning the running plate and the brake blocks, brake rigging and metal wire sandpipes mounted to the chassis. Within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. Moving to the tender and two lengths of locomotive to tender drawbar are provided to suit different layout conditions whilst the tender itself is finely moulded, with several separately applied details including the lamp irons, handrails, handwheels and sprung metal buffers. A realistic coal load is included, with the empty coal space modelled below, whilst the tender chassis includes brake rigging and the water scoop. The livery application is executed to the highest standard with the rich, uniform paintwork enhanced by the black and orange lining, emulating the BR lined green livery to full effect. Numbering, lettering and the BR Early Emblem is reproduced in high definition, resulting in a model fit for any collection.   MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Locomotive is Preserved Pristine BR Lined Green (Early Emblem) livery Running No. 46521 Short Tender Ladder and Oval Cab Footsteps Two lengths of Tender Drawbar Supplied Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 8 Pin DCC Decoder Socket – Recommend Decoder item No. 36-566A Length 226mm (over couplings) IVATT 2MT HISTORY Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network. With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today.

Bachmann LMS Ivatt 2MT 46447 BR Lined Black (Late) (Preserved)

LMS Ivatt 2MT 46447 BR Lined Black (Late) (Preserved) LMS Ivatt 2MT 46447 BIvatt’s 2MT ‘Mogul’ 2-6-0 Tender Locomotives were popular, go-anywhere engines which served the LMS and BR for two decades and across a wide area, making this Bachmann Branchline model a great choice for many modellers wishing to depict the steam age or preservation, as the type remains strongly represented today. The Branchline model of Ivatt’s 2-6-0 mogul employs a diecast running plate and locomotive chassis to provide an impressive weight, ensuring that the model’s performance matches that of the prototype. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails and lamp irons to the safety valves, whistle and sprung buffers, each of which are turned brass. Further details are added individually like the lubricators and sand boxes adorning the running plate and the brake blocks, brake rigging and metal wire sandpipes mounted to the chassis. Within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. Moving to the tender and two lengths of locomotive to tender drawbar are provided to suit different layout conditions whilst the tender itself is finely moulded, with several separately applied details including the lamp irons, handrails, handwheels and sprung metal buffers. A realistic coal load is included, with the empty coal space modelled below, whilst the tender chassis includes brake rigging and the water scoop. The livery application is executed to the highest standard with the rich, uniform paintwork enhanced by the three-colour lining, emulating the BR lined black livery to full effect. Numbering, lettering and the BR Late Crest is reproduced in high definition, resulting in a model fit for any collection.   MODEL FEATURES: Bachmann Branchline OO Scale Era 5 Locomotive is Preserved Pristine BR Lined Black (Late Crest) livery Running No. 46447 Long Tender Ladder and Oval Cab Footsteps Two lengths of Tender Drawbar Supplied Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 8 Pin DCC Decoder Socket – Recommend Decoder item No. 36-566A Length 226mm (over couplings)     IVATT 2MT HISTORY   Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network.   With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today. BR Lined Black (Late) (Preserved)

Hornby BR Class 30 D5502 BR Green (Sound Fitted) (TT)

BR Class 30 D5502 BR Green (Sound Fitted) Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3071TXSM is DCC Sound Fitted and depicts Class 30 D5502 in BR Green with duck egg blue stripes. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional buffer beam pipes Minimum 2nd radius curves Electronics: Space for HM7070 Power Bank for uninterrupted running Sound: Utilises high-fidelity HM7000 sound file Chassis-mounted speaker Tooling: Indicator headcode discs 'Skinhead’ roof Toffee Apple cab style Mirrlees exhaust Side steps Oil filler Water filler Open boiler port Without door louvres Livery: BR Green with duck egg stripes Later British Railways crests Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 30 D5502 BR Green (TT)

BR Class 30 D5502 BR Green w/ Duck Egg Lining Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3071M depicts Class 30 D5502 in BR Green with duck egg blue stripes. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional buffer beam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Indicator headcode discs ‘Skinhead’ roof Toffee Apple cab style Mirrlees exhaust Side steps Oil filler Water filler Open boiler port Without door louvres Livery: BR Green with duck egg stripes Later British Railways crests Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31219 BR Civil Engineers "Dutch" (TT)

BR Class 31 31219 BR Civil Engineers "Dutch" Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3074M depicts Class 31219 in BR Civil Engineers ‘Dutch’ Grey & Yellow. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode roof High intensity light NRN roof pods Later cab style English Electric exhaust Plated side steps Plated oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Civil Engineers ‘Dutch’ Grey and Yellow Silver BR double arrows Blue Stratford Sparrow depot plaques Full yellow ends Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31237 BR Railfreight Red Stripe (TT)

BR Class 31 31237 BR Railfreight Red Stripe Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3073M depicts Class 31237 in BR Railfreight Grey with solebar red stripe. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode roof Later cab style English Electric exhaust Plated side steps Plated oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Railfreight grey Solebar red stripe Full yellow ends Large bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31270 BR Blue (Sound Fitted) (TT)

BR Class 31 31270 BR Blue (Sound Fitted) Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3072TXSM is DCC Sound Fitted depicts Class 31270 in BR Blue. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Sound: Utilises high-fidelity HM7000 sound file Chassis-mounted speaker Tooling: Glazed headcode roof Later cab style English Electric exhaust Plated side steps Oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Blue Full yellow ends Small bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31270 BR Blue (TT)

BR Class 31 31270 BR Blue Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3072M depicts Class 31270 in BR Blue. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system. Decoder socket housed underneath clip-fit body for easy access. Space for HM7070 Power Bank for uninterrupted running Tooling: Glazed headcode roof Later cab style English Electric exhaust Plated side steps Oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Blue Full yellow ends Small bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby LNER J50 Class 68958 BR Black (Early) (TT)

LNER J50 Class 68958 BR Black (Early) Hot on the heels of the first run of J50’s, is this BR (Early) J50 Class 68958 tank engine for your TT:120 collection. Moulded in both die-cast and plastic, this characterful locomotive looks and performs excellently thanks to all-wheel pickups and a smooth coreless motor. For those operating on DCC, a 6-Pin decoder socket is located within the boiler and is compatible with HM7000.  This example depicts No.68958 in BR Black livery, with early emblems on the tank sides. Model Specification: Based on new J50 tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, chimney, safety valves, handrails, lamp irons and buffers. Brass double-jointed connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system. Tooling: Smokebox door numberplate Coal rails Livery: BR Plain Black Livery ‘Cycling Lion’ Early Emblem on tank sides Authentic colours and typefaces used Semi-gloss finish Era 4. - TT:120 Scale

Hornby A1X Terrier 10 Isle of Wight Central Railway Lined Maroon (TT)

A1X Terrier 10 Isle of Wight Central Railway Lined Maroon The delightful LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive is back in TT:120 scale, featuring the latest tooling suite from 2025. This beautiful representation of the ever-popular Class A1 perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including the option for digital command control via a 6-pin decoder socket (decoder sold seperately). This particular example depicts No.10 in Isle of Wight Central Railway Lined Maroon livery. Model Specification: Based on the highly accurate 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump fitted Livery: IOW Lined Maroon - TT:120 Scale

Hornby A1X Terrier 655 'Stepney' LB&SCR Improved Engine Green (TT)

A1X Terrier 655 'Stepney' LB&SCR Improved Engine Green The delightful TT:120 scale LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive is back, utilising the highly accurate tooling suite from 2025. This beautiful representation of the ever-popular Class A1 perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket.  This particular example depicts No.655 ‘Stepney’ in London Brighton & South Coast Railway Improved Engine Green. Model Specification: Based on 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system. Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump fitted. Livery: LB&SCR Improved Engine Green Maroon chassis Era 2. - TT:120 Scale

Hornby A1X Terrier 735 LSWR Lined Green (TT)

A1X Terrier 735 LSWR Lined Green  This delightful TT:120 scale LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive model features the highly accurate 2025 tooling suite. A beautiful representation of the ever-popular Class A1, the model perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including provision for digital command control via a 6-pin decoder socket. This particular example depicts No.735 in London and South Western Railway Lined Green livery. Model Specification: Based on new 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes fitted Small cab bunker with no coal rails Westinghouse pump removed Livery: LSWR Lined Green Livery Maroon edging to tank and cab sides - TT:120 Scale

Hornby SR Merchant Navy 21C4 'Cunard White Star' (TXS Steam Generator)

SR Merchant Navy 21C4 'Cunard White Star' (TXS Steam Generator) The popular Bulleid Pacific Merchant Navy is back in OO gauge with a brand new livery and steam generator technology. This highly detailed model represents the air-smoothed 'Spam Can', also known as 21C4 'Cunard White Star' in Southern Railways' malachite green. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Details: Highly detailed cab with fully decorated backhead and decorated instrument dials  Opening cab roof vent  Removable simulated coal load with fully detailed tender bunker  Accurately modelled Merchant Navy Bullied-Firth-Brown wheels  Modified 21C4 'widows peak' front end streamlining and chimney arrangement  5000 gallon tender with rear access ladders.  Cast trailing truck  Separately fitted nameplate, number plate, and company ownership plate  Circular smokebox door company plate  Sprung metal buffers  Heavy die-cast chassis, pony truck, and trailing truck  Features: Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element).  Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers and HM7000 app control.  Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect.  Adjustable steam output settings via the decoder  Water reservoir for up to 20 minutes of continuous steam running  Die-cast connecting rods and valve gear  Powerful 5-pole skew-wound motor  Flywheel with cardan shaft arrangement for smooth running  Oilite main drive bearings Wheel pickups on tender and driven locomotive wheelsets  Pogo pin wheel pickup arrangement for easy pickup servicing  8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling.  Front and rear NEM coupling pockets, with narrow tension lock couplings  Optional fit rear flanged wheelset (only recommended for larger layouts with sweeping curves or display purposes).  - OO Scale 

Bachmann LMS 10001 BR Lined Green (Late Crest) (Sound Fitted)

LMS 10001 BR Lined Green (Late Crest) (Sound Fitted) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model pays homage to the youngest of the pair, 10001. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system and these remained a feature of both locomotives thereafter, as displayed on this model of No. 10001 which is depicted in BR Green livery and with the late crests that were applied by BR from 1956. By this time the pair had returned to the Midland Region and were employed on duties across the region. The Bachmann Branchline model of No. 10001 is a highly detailed replica of the prototype, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10000 BR Black (Early)

LMS 10000 BR Black (Early) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model tells the story of No. 10000 during its time working on the Southern Region. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system as displayed on this model of No. 10000, which is depicted in its striking black and silver livery with early emblems. The Bachmann Branchline model is a highly detailed replica of the pioneering prototype, adorned with numerous separately fitted components to accurately capture the appearance of this iconic machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodysides Steps Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10000 BR Black (Early) (Sound Fitted)

LMS 10000 BR Black (Early) (Sound Fitted) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model tells the story of No. 10000 during its time working on the Southern Region. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system as displayed on this model of No. 10000, which is depicted in its striking black and silver livery with early emblems. The Bachmann Branchline model is a highly detailed replica of the pioneering prototype, adorned with numerous separately fitted components to accurately capture the appearance of this iconic machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodysides Steps Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10001 BR Lined Green (Late Crest)

LMS 10001 BR Lined Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model pays homage to the youngest of the pair, 10001. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system and these remained a feature of both locomotives thereafter, as displayed on this model of No. 10001 which is depicted in BR Green livery and with the late crests that were applied by BR from 1956. By this time the pair had returned to the Midland Region and were employed on duties across the region. The Bachmann Branchline model of No. 10001 is a highly detailed replica of the prototype, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann MR 3835 (4F) w/ Fowler Tender 43892 BR Black

MR 3835 (4F) w/ Fowler Tender 43892 BR Black The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black ‘British Railways’ livery Running No. 43892 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Fowler Tender 43892 BR Black (SF)

MR 3835 (4F) w/ Fowler Tender 43892 BR Black (Sound Fitted) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black ‘British Railways’ livery Running No. 43892 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack SOUND FITTED – Fitted with a ESU Loksound V5DCC 21 Pin DCC Sound Decoder Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Fowler Tender 43982 BR Black (Late)

MR 3835 (4F) w/ Fowler Tender 43982 BR Black (Late) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Late Crest livery Running No. 43982 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann LMS Jubliee 45671 'Prince Rupert' BR Lined Green (Early)

LMS Jubliee w/Riveted Tender 45671 'Prince Rupert' BR Lined Green (Early) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Early Emblem livery Running No. 45671 Named ‘Prince Rupert’ Etched Nameplates included Long Firebox Single Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubliee 45671 'Prince Rupert' BR Lined Green (Early) (SF)

LMS Jubliee w/Riveted Tender 45671 'Prince Rupert' BR Lined Green (Early) (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Early Emblem livery Running No. 45671 Named ‘Prince Rupert’ Etched Nameplates included Long Firebox Single Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS Jubliee 5742 'Connaught' LMS Crimson Lake

LMS Jubliee w/ Riveted Tender 5742 'Connaught' LMS Crimson Lake The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine LMS Crimson Lake livery Running No. 5742 Named ‘Connaught’ Etched Nameplates included Long Firebox Double Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS Jubliee 5742 'Connaught' LMS Crimson Lake (SF)

LMS Jubliee w/ Riveted Tender 5742 'Connaught' LMS Crimson Lake (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine LMS Crimson Lake livery Running No. 5742 Named ‘Connaught’ Etched Nameplates included Long Firebox Double Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS Jubilee 45596 'Bahamas' BR Lined Green (Late) (SF)

LMS Jubilee w/Welded Tender 45596 'Bahamas' BR Lined Green (Late) (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Locomotive is Preserved Pristine BR Lined Green Late Crest livery Running No. 45596 Named ‘Bahamas’ Etched Nameplates included Short Firebox Double Chimney Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate AWS Equipment Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubilee 45704 'Leviathan' BR Lined Green (Late)

LMS Jubilee w/Fowler Tender 45704 'Leviathan' BR Lined Green (Late) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 45704 Named ‘Leviathan’ Etched Nameplates included Long Firebox Single Chimney Riveted Fowler 3,500-gallon Tender with Water Pick-Up Gear Smokebox Door with Large Numberplate AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubilee 45704 'Leviathan' BR Lined Green (Late) (SF)

LMS Jubilee w/Fowler Tender 45704 'Leviathan' BR Lined Green (Late) (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 45704 Named ‘Leviathan’ Etched Nameplates included Long Firebox Single Chimney Riveted Fowler 3,500-gallon Tender with Water Pick-Up Gear Smokebox Door with Large Numberplate AWS Equipment Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubilee 45596 'Bahamas' BR Lined Green (Late)

LMS Jubilee w/Welded Tender 45596 'Bahamas' BR Lined Green (Late) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Locomotive is Preserved Pristine BR Lined Green Late Crest livery Running No. 45596 Named ‘Bahamas’ Etched Nameplates included Short Firebox Double Chimney Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early)

LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early) Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties and named more than a dozen after the holiday resorts that it served. We’ve selected one of the most famous destinations of them all – Blackpool – as the subject for this Branchline OO scale model. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine BR Lined Green Early Emblem livery Running No. 45524 Named ‘Blackpool’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale

Bachmann LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early) (SF)

LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early) (Sound Fitted) Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties and named more than a dozen after the holiday resorts that it served. We’ve selected one of the most famous destinations of them all – Blackpool – as the subject for this Branchline OO scale model. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine BR Lined Green Early Emblem livery Running No. 45524 Named ‘Blackpool’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale

Bachmann LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Crimson (SF)

LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Lined Crimson (Sound Fitted) Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties but sadly none were preserved, however The LMS Patriot Project was launched in 2008 to build a replica Patriot Class locomotive to represent this long-lost class and create a national memorial engine, recognising the role that class leader No. 5500 performed for the LMS from 1937. Bachmann is proud to support The LMS Patriot Project and by producing this model of ‘the Unknown Warrior’ we will be helping towards the completion of its full size counterpart. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine LMS Lined Crimson Lake livery Running No. 5551 Named ‘The Unknown Warrior’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale  

Bachmann LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Lined Crimson

LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Lined Crimson Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties but sadly none were preserved, however The LMS Patriot Project was launched in 2008 to build a replica Patriot Class locomotive to represent this long-lost class and create a national memorial engine, recognising the role that class leader No. 5500 performed for the LMS from 1937. Bachmann is proud to support The LMS Patriot Project and by producing this model of ‘the Unknown Warrior’ we will be helping towards the completion of its full size counterpart. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine LMS Lined Crimson Lake livery Running No. 5551 Named ‘The Unknown Warrior’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale  

Bachmann GCR 9J 295 GCR Lined Black (Sound Fitted)

GCR 9J 295 GCR Lined Black (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The 9Js carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme with its ornate three-colour lining is reproduced to exquisite effect, with a rich and consistent finish throughout. The Great Central lettering and company crest on the tender is the icing on the cake, comprising no fewer than six separate colours and replicated using precision printing techniques for full authenticity. The Branchline 9J runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine Great Central Railway Lined Black livery Running No. 295 Smooth Smokebox Door with original Handwheel Top Front Lamp Iron mounted above the Smokebox Door Robinson Tapered Chimney Draught Retarder Original Tall Dome Ramsbottom Safety Valves Parallel Buffer Shanks with End Collars Central Rib on Cab Roof Tender fitted with Water Pick-Up Gear Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Hornby Stainer 5MT 'Black 5' 45473 BR Lined Black (Sound/Smoke Fitted)

Stainer 5MT 'Black 5' 45473 BR Lined Black (Sound/Smoke Fitted) The latest addition to our fleet of LMS Class 5MT model locomotives features our innovative steam generator technology. This highly detailed OO gauge model sends out burst of steam in time with the movement of the wheels for the most realistic running. Fitted with HM7000, it also includes sound and control from your mobile device. With sprung metal buffers and NEM tension lock couplings, this is an impressive locomotive for your model railway layout. History The Wiiliam Stanier-designed Class 5 was introduced in 1934 onto the LMS and by the time the last was built in 1951, the class was 842-strong. No. 45473 was completed at Derby in May 1943, entering service as 5473 and spending much of its working life in Scotland, being part of Perth’s allocation at the time of Nationalisation in 1948 and finishing its career at Dundee Tay Bridge. From there, it was withdrawn in November 1966 and subsequently scrapped at W.H. Arnott, Young at Co. Ltd, Carmyle, Glasgow the following February. Specific to R30475SS Running number 45473 BR Mixed Traffic livery Matt smokebox and cab roof finish. 5MT long wheelbase configuration. Flickering firebox. Fluted die-cast connecting rods. Walschaerts valve gear. Parallel buffer stocks. Common Class 5MT features High detail OO gauge model based on extensive research and original works drawings. Pre-fitted 21-pin HM7000 decoder and speaker. The decoder compatible with NMRA DCC controllers, HM7000 APP control and has the Merchant Navy sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Die-cast chassis and running plate. Model weight is 360 grams. High detail cab and fully decorated backhead with decorated instrument dials. HM7000 Power Bank compatible. Powerful 5 pole skew wound motor. Illuminated flickering firebox. Illuminated head lamps and tail lamps (can be controlled using a DCC Decoder). Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Die-cast connecting rods and valve gear. Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Opening cab roof vent. Adjustable cab doors. Sprung metal buffers. Front and rear NEM coupling pocket. Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - DCC HM7000 TXS Sound Fitted w/ Smoke - OO Scale

Hornby LNER A4 4468 'Mallard' LNER Garter Blue (Sound/Smoke Fitted)

LNER A4 4468 'Mallard' LNER Garter Blue (Sound/Smoke Fitted) One of the most famous of all steam locomotives, ‘Mallard’ still holds the world speed record for steam. In July 1938, it reached 126mph on Stoke Bank. Entering service in March of that year in LNER Garter blue, it had full side valances and red wheels, as depicted by our highly detailed model. It was renumbered 22 in 1946, by which time it carried wartime plain black. When it was withdrawn from King’s Cross in April 1963, it was in lined BR green and numbered 60022. The locomotive is preserved in its original livery at the National Railway Museum in York. 'Mallard' has always been one of our most popular models. In 2026, we have given the A4 a tooling update and the model now includes the new Hornby steam generator technology, working headlights and tender lights. Specific to R30551SS Running number 4468 Lined Garter Blue livery Non-corridor tender Double chimney arrangement Valanced streamline body made from die-cast metal LHD cab arrangement Working headlights Working tender lights Common Class A4 features High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler High detail cab and fully decorated backhead with decorated instrument dials Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers, HM7000 APP control and has the Class A4 sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder HM7000 Power Bank compatible Powerful 5 pole skew wound motor Illuminated flickering firebox Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Fully decorated crew figures Turned brass safety valve Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Separately fitted simulated coal load. - DCC HM7000 TXS Sound Fitted w/ Smoke - OO Scale

Hornby BR Rebuilt Merchant Navy 35028 'Clan line' BR Green(Sound/Smoke)

BR Rebuilt Merchant Navy 35028 'Clan line' BR Lined Green (Sound/Smoke Fitted) The BR Rebuilt Merchant Navy 'Clan Line' is back in OO model form. This newly tooled model locomotive has sprung metal buffers and NEM tension lock couplings and is a highly detailed replica of a popular steam engine. One of the last of its class to be built, this locomotive was completed after nationalisation of Britain’s railways to Bulleid’s Southern ‘Merchant Navy’ design, complete with streamlined casing and chain-driven valve gear, entering service in December 1948. It didn’t receive its name until January 1951, during a ceremony at Southampton Docks. Like all 30 members of the class, ‘Clan Line’ was rebuilt, in its case, during 1959, and remained in service until withdrawal from Nine Elms, London in July 1947. It was subsequently saved privately for preservation and is a regular main line performer, once hauling the prestigious Belmond British Pullman. Please Note: this model requires a DCC controller or the HM7000 app to control.  Specific to R30490SS: STEAM GENERATOR Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder Water reservoir for up to 20 minutes continuous steam running MODEL SPECIFICATION Die-cast chassis, pony truck and trailing truck Die-cast boiler and running plate Merchant Navy Bullied-Firth-Brown wheels High detail cab and fully decorated backhead with decorated instrument dials Powerful 5 pole skew wound motor with cardan shaft and flywheel Flywheel with cardan shaft arrangement for smooth running Pogo pin wheel pickup arrangement for easy pickup servicing Die-cast connecting rods and valve gear Oilite main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Optional fit rear flanged wheelset. Only recommended for larger layouts with sweeping curves or for display purposes Wheel pickups on the main locomotive and tender wheelsets Separately fitted simulated coal load. TOOLING High detail OO gauge model based on extensive research, 3D scanning and original works drawings Cast trailing truck Modern 6000 gallon tender with additional pump, air tanks and battery arrangement for main line running (as preserved) Opening cab roof vent DCC Fitted with a 21-pin decoder socket Flickering firebox Working cab light MCU controlled electric front lamps for full lamp code control Working tender lamps Eight-way locomotive to tender connection LIVERY BR Lined Green livery - OO Scale

Hornby Sovereign Pullman Train Set (TXS Sound/Smoke Fitted)

Sovereign Pullman Train Set (TXS Sound/Smoke Fitted) A masterpiece of British steam engineering reimagined for the modern railway enthusiast. This premium OO gauge train set captures the elegance and power of the legendary A4 Class locomotive, complete with authentic sound, illuminated headlamps and a realistic steam generator. Paired with three exquisitely detailed Pullman coaches featuring interior lighting and glowing table lamps, the set evokes the golden age of luxury rail travel. A double-circuit track layout with siding gives you room to expand, while mains power and Bluetooth control via the free Hornby HM7000 app delivers smooth, intuitive operation from your smartphone or tablet. This is a statement set for those who value heritage, detail and cutting-edge control. Please Note: This set requires the use of the HM7000 free to download APP for control. Includes: A high quality presentation case pull-out draws. A 3rd and 2nd radius loop of track with siding and buffer stop. Points are pre-fitted with point clips for full layout power and control. HM7000 power cable to provide track power. Hornby TrackMat Rerailer A4 Locomotive – Sir Nigel Gresley High detail OO gauge model based on extensive research and original works drawings. Heavy die-cast chassis Running number 60007 BR Pussian Blue Corridor tender Double chimney arrangement. Un-valanced streamline plastic body. LHD cab arrangement. Working headlights Working tender light. High detail cab and fully decorated backhead with decorated instrument dials. Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers, HM7000 APP control and has the Merchant Navy sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder. HM7000 Power Bank compatible. Powerful 5 pole skew wound motor. Illuminated flickering firebox. Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Fully decorated crew figures. Turned brass safety valve Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Sprung metal buffers. Front and rear NEM coupling pocket. Separately fitted simulated coal load. Pullman Coaches – Ione, Lucille & Zena All steel K-Type Pullman Coaches Exquisite decoration with a wealth of separately fitted parts. Working table lamps Sprung metal buffers NEM tension lock couplers Pullman Coach Ione – Kitchen First Pullman Coach Lucille – First Class Parlour Pullman Coach Zena – First Class Parlour - OO Scale

Bachmann Class 47/7 47791 'Venice Simplon Orient Express' RES

Class 47/7 47791 'Venice Simplon Orient Express' RES Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Rail Express Systems livery Running No. 47791 Named ‘Venice Simplon Orient Express’ Etched Nameplates and Depot Plaques included Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Cut-Cab Locomotive Bufferbeam-mounted ETH Equipment Scottish Jumper Cables TDM Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight RES Taillights with Multifaceted Lenses Round Buffers Checker Plate Kickplate below Cab Door Partially-plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/7 47791 'Venice Simplon Orient Express' RES (SF Deluxe)

Class 47/7 47791 'Venice Simplon Orient Express' RES (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Rail Express Systems livery Running No. 47791 Named ‘Venice Simplon Orient Express’ Etched Nameplates and Depot Plaques included Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Cut-Cab Locomotive Bufferbeam-mounted ETH Equipment Scottish Jumper Cables TDM Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight RES Taillights with Multifaceted Lenses Round Buffers Checker Plate Kickplate below Cab Door Partially-plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/7 47791 'Venice Simplon Orient Express' RES (SF)

Class 47/7 47791 'Venice Simplon Orient Express' RES (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Rail Express Systems livery Running No. 47791 Named ‘Venice Simplon Orient Express’ Etched Nameplates and Depot Plaques included Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Cut-Cab Locomotive Bufferbeam-mounted ETH Equipment Scottish Jumper Cables TDM Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight RES Taillights with Multifaceted Lenses Round Buffers Checker Plate Kickplate below Cab Door Partially-plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/8 47826 WCRC Maroon

Class 47/8 47826 WCRC Maroon Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine West Coast Railways Company Maroon livery Running No. 47826 Plated Headcode Panels with Sealed Beam Marker Lights Twin Bufferbeam Brackets denoting a Crewe-built Machine Cut-Cab Locomotive Bufferbeam-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Checker Plate Kickplate below Cab Door Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive (fitted at the No. 2 End) Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 D1940 BR Two-Tone Green (SYP)

Class 47/0 D1940 BR Two-Tone Green (SYP) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Two-Tone Green (Small Yellow Panels) livery Running No. D1940 Glazed Headcode Panels Single Bufferbeam Bracket denoting a Brush-built Machine Double Arm Windscreen Wipers Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Clayton Roof Boiler Port 1250 Gallon Water Tanks Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 D1940 BR Two-Tone Green (SYP) (Sound Fitted)

Class 47/0 D1940 BR Two-Tone Green (SYP) (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Two-Tone Green (Small Yellow Panels) livery Running No. D1940 Glazed Headcode Panels Single Bufferbeam Bracket denoting a Brush-built Machine Double Arm Windscreen Wipers Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Clayton Roof Boiler Port 1250 Gallon Water Tanks Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47280 BR Railfreight Grey (Sound Fitted)

Class 47/0 47280 BR Railfreight Grey (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Railfreight Grey livery Running No. 47280 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port 1,200 Gallon Water Tanks with Water Filler Valves Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 D1922 BR Two-Tone Green (SYP)

Class 47/0 D1922 BR Two-Tone Green (SYP) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Two-Tone Green (Small Yellow Panels) livery Running No. D1922 Glazed Headcode Panels Single Bufferbeam Bracket denoting a Brush-built Machine Double Arm Windscreen Wipers Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Clayton Roof Boiler Port 1250 Gallon Water Tanks Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 D1922 BR Two-Tone Green (SYP) (Sound Fitted Deluxe)

Class 47/0 D1922 BR Two-Tone Green (SYP) (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Two-Tone Green (Small Yellow Panels) livery Running No. D1922 Glazed Headcode Panels Single Bufferbeam Bracket denoting a Brush-built Machine Double Arm Windscreen Wipers Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Clayton Roof Boiler Port 1250 Gallon Water Tanks Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47226 BR Blue (Sound Fitted Deluxe)

Class 47/0 47226 BR Blue (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47226 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47238 BR Blue

Class 47/0 47238 BR Blue Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47238 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47238 BR Blue (Sound Fitted Deluxe)

Class 47/0 47238 BR Blue (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47238 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47238 BR Blue (Sound Fitted)

Class 47/0 47238 BR Blue (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47238 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47280 BR Railfreight Grey

Class 47/0 47280 BR Railfreight Grey Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Railfreight Grey livery Running No. 47280 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port 1,200 Gallon Water Tanks with Water Filler Valves Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47280 BR Railfreight Grey (Sound Fitted Deluxe)

Class 47/0 47280 BR Railfreight Grey (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Railfreight Grey livery Running No. 47280 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port 1,200 Gallon Water Tanks with Water Filler Valves Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Hornby LNER Class A4 60016 'Silver King' BR (Early) Green (TT)

The LNER Gresley A4 is one of the most iconic express locomotives in Great Britain, with its streamlined casing a classic symbol of the attitude towards speed and design in the 1930s, which saw increased competition to the railways from road and air travel. The LNER Board knew that they had to make travel between the major cities faster, comfortable and more reliable. Nigel Gresley, the LNER's Chief Mechanical Officer, travelled on the Fliegende Hamburger diesel locomotive in Germany and was impressed by its streamlining, although he realized it was only efficient at high speeds. Gresley was certain that a modified A3 Pacific, with streamlining, could haul greater loads than other locomotives at the same speed or faster and a series of trials were conducted to confirm the A3's suitability. With the trials successfully completed, the LNER Board gave Gresley the go-ahead to create the "Silver Jubilee" streamlined trains, the first of the new streamlined A4s.The streamlining of the A4s' steam circuit, higher boiler pressure and extension of the firebox to create a combustion chamber made them more efficient than the A3 as they consumed less coal and water- especially later on when they were also fitted with a Kylchap double chimney. This improved their free steaming capabilities further. Their streamlined design not only made them capable of high speeds, but created an up draught of smoke, obscuring the driver's vision, a major problem on the new Class A4 engines. The story goes that during wind tunnel testing, after several unsuccessful efforts to get the smoke to lift clear, a thumbprint was inadvertently left on the clay model just behind the chimney. This succeeded in clearing the smoke and was incorporated into the final design. 2511 Silver King was the 3rd A4 locomotive to be built, designed to pull the Silver Jubilee service. The locomotive entered service in November 1935 in the unique LNER Silver livery designed for the service. The locomotive would go on to work under BR before being scrapped in 1965, making it one of the longest serving A4 locomotives. - NEXT 18 DCC Decoder Socket - TT:120 Scale

Hornby Water Tower Red Brick Collection (TT)

Water Tower Red Brick Collection Crafted from resin and hand-decorated, this red brick water tower brings authentic steam-era charm and detailed realism to your layout’s railway infrastructure - TT:120 Scale

Graham Farish GWR 4073 'Castle' 5015 'Kingswear Castle' BR Green Early (SF)(N)

GWR 4073 'Castle' 5015 'Kingswear Castle' BR Lined Green Early Emblem (Sound Fitted) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine BR Lined Green (Early Emblem) Livery Running No. 5015 Named ‘Kingswear Castle’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Straight Front Curved Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Graham Farish GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (N)

GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (GW Crest) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine GWR Lined Green (GW Crest) Livery Running No. 5055 Named ‘Earl of Eldon’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Curved Front Straight Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Graham Farish GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (SF) (N)

GWR 4073 'Castle' 5055 'Earl of Eldon' GWR Lined Green (GW Crest) (Sound Fitted) The model that started a revolution as the first British N Scale steam locomotive to be made with SOUND FITTED, the Graham Farish ‘Castle’ has a technical specification as impressive as its good looks, with a powerful coreless motor driving the wheels through a diecast metal gearbox, all wheel pickup from the driving and tender wheels and separate metal bearings fitted to the driving wheel axles, smooth and reliable running is guaranteed. The tender houses a speaker and Next18 DCC decoder socket, making it easy to add sound, or opt for a SOUND FITTED version and the work is done for you, so you can enjoy realistic sound effects straight from the box on both Analogue and DCC. Details on this model: Pristine GWR Lined Green (GW Crest) Livery Running No. 5055 Named ‘Earl of Eldon’ Collett 4,000-gallon Tender Single Chimney Inside Cylinder Chest: Box Pattern with Curved Front Straight Cylinder Steam Pipes Tapered Buffers Horizontal Cab Side Handrail Rear Sandboxes Behind Cab Steps Short Nameplates Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 145mm (over couplings) Coreless motor Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Traction tyres fitted to the rear driving wheels for assured haulage capabilities Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front bogie Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater High-precision, injection-moulded bodyshell, running plate and tender with separately fitted details parts including smokebox door, lower front lamp irons, steam pipes, whistle and reverser Separately applied metal components including handrails, buffers and sand pipes Dome, filler cap, water scoop and vacuum pipe added to the tender as separate parts Tender fitted with metal coal-effect load Detailed cab interior including boiler backhead controls and gauges, brake standard and water scoop standard Hinged and posable metal fall plate between the locomotive and tender Each model supplied with a full set of accessory parts including dummy screwlink couplings and front vacuum pipe Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - N Scale

Bachmann Class 31/1 Refurbished 31188 BR Engineers Dutch (Sound Fitted)

Class 31/1 Refurbished 31188 BR Engineers Dutch (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Engineers Grey & Yellow livery Running No. 31188 Etched Depot Plaque and BR Double Arrow Included Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods High Intensity Headlights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/4 Refurbished 31423 'Jerome K. Jerome' BR InterCity

Class 31/4 Refurbished 31423 'Jerome K. Jerome' BR InterCity The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR InterCity (Mainline) livery Running No. 31423 Named ‘Jerome K. Jerome’ Etched Nameplates Included Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/4 Refurbished 31423 'Jerome K. Jerome' InterCity (SF)

Class 31/4 Refurbished 31423 'Jerome K. Jerome' BR InterCity (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR InterCity (Mainline) livery Running No. 31423 Named ‘Jerome K. Jerome’ Etched Nameplates Included Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/4 Refurbished 31423 'Jerome K. Jerome' InterCity (SFD)

Class 31/4 Refurbished 31423 'Jerome K. Jerome' BR InterCity (Sound Fitted Deluxe) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR InterCity (Mainline) livery Running No. 31423 Named ‘Jerome K. Jerome’ Etched Nameplates Included Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 5848 BR Blue (Sound Fitted Deluxe)

Class 31/1 5848 BR Blue (Sound Fitted Deluxe) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Blue livery Running No. 5848 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 1D26 and 2B63 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 5848 BR Blue (Sound Fitted)

Class 31/1 5848 BR Blue (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Blue livery Running No. 5848 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 1D26 and 2B63 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 Refurbished 31188 BR Engineers Dutch

Class 31/1 Refurbished 31188 BR Engineers Dutch The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Engineers Grey & Yellow livery Running No. 31188 Etched Depot Plaque and BR Double Arrow Included Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods High Intensity Headlights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 Refurbished 31188 BR Engineers Dutch (SFD)

Class 31/1 Refurbished 31188 BR Engineers Dutch (Sound Fitted Deluxe)  The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Engineers Grey & Yellow livery Running No. 31188 Etched Depot Plaque and BR Double Arrow Included Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods High Intensity Headlights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 31101 BR Blue

Class 31/1 31101 BR Blue The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Blue livery Running No. 31101 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2B99 and 6M65 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 31101 BR Blue (Sound Fitted Deluxe)

Class 31/1 31101 BR Blue (Sound Fitted Deluxe)  The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Blue livery Running No. 31101 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2B99 and 6M65 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 31101 BR Blue (Sound Fitted)

Class 31/1 31101 BR Blue (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Blue livery Running No. 31101 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2B99 and 6M65 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 5848 BR Blue

Class 31/1 5848 BR Blue The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Blue livery Running No. 5848 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 1D26 and 2B63 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 30 D5574 BR Green (Small Yellow Panels) (SFD)

Class 30 D5574 BR Green (Small Yellow Panels) (Sound Fitted Deluxe)  The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Green (Small Yellow Panels) livery Running No. D5574 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 5 76 and 4M35 Original Windscreen Washer Jets (Uncovered) Full Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins Mirrlees Engine Exhaust Ports Mirrlees Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 30 D5574 BR Green (Small Yellow Panels) (Sound Fitted)

Class 30 D5574 BR Green (Small Yellow Panels) (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Green (Small Yellow Panels) livery Running No. D5574 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 5 76 and 4M35 Original Windscreen Washer Jets (Uncovered) Full Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins Mirrlees Engine Exhaust Ports Mirrlees Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 30 D5862 BR Green (Small Yellow Panels)

Class 30 D5862 BR Green (Small Yellow Panels) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Green (Small Yellow Panels) livery Running No. D5862 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2J05 and 1M77 Original Windscreen Washer Jets (Uncovered) Full Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins Mirrlees Engine Exhaust Ports Mirrlees Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 30 D5862 BR Green (Small Yellow Panels) (SFD)

Class 30 D5862 BR Green (Small Yellow Panels) (Sound Fitted Deluxe) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Green (Small Yellow Panels) livery Running No. D5862 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2J05 and 1M77 Original Windscreen Washer Jets (Uncovered) Full Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins Mirrlees Engine Exhaust Ports Mirrlees Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 30 D5862 BR Green (Small Yellow Panels) (Sound Fitted)

Class 30 D5862 BR Green (Small Yellow Panels) (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Green (Small Yellow Panels) livery Running No. D5862 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2J05 and 1M77 Original Windscreen Washer Jets (Uncovered) Full Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins Mirrlees Engine Exhaust Ports Mirrlees Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 30 D5574 BR Green (Small Yellow Panels)

Class 30 D5574 BR Green (Small Yellow Panels) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Green (Small Yellow Panels) livery Running No. D5574 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 5 76 and 4M35 Original Windscreen Washer Jets (Uncovered) Full Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins Mirrlees Engine Exhaust Ports Mirrlees Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Dapol SR WC Class '34030' "Watersmeet" BR Green (Late) (N)

SR WC Class '34030' "Watersmeet" BR Green (Late) The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Scale Model Scenery Wright's Lock-Up – Laser-cut kit (OO)

Wright's Lock-Up – Laser-cut kit Wright's Lockup is a small but perfectly formed, versatile OO gauge / 1:76 scale lockup / stores building suitable for industrial, town or harbourside scenes. Based on a real life protoype in Penzance, Cornwall, the building features heavily weathered Flemish Bond brickwork with wooden doors, sash windows, slate roof & downspouts. The side wall also features an optional ghost sign for Wright's Electrical, Hot Water & Sanitary Engineers which would have been the local plumbers & electricians back in the good old days. Also included is an alternative set of buff stone wraps which can be used to give the building a more rural feel.  The kit is supplied with laser-cut parts for ease of assembly and comes with fully weathered paper wraps and roof slates, with no additional painting or weathering required on the main components for a "Realistically Better" finish straight from the pack. The window & doors are supplied laser-cut from our eco-friendly laserboard and are packed with detail including engraved planks, hinges and locks. These will require painting with acrylic paints prior to assembly or colouring with suitable markers. We used a Plastikote Stone color for our test build which we then coated lightly with ground pastels to weather them down for a little less prestine finish. The building consists of two floors and features interior wall wraps for both the brick and stone versions, with white wash & flaking paint for added realism. Ceiling and floor details are also included for the upper floor. There's also plenty of scope for customisation too... with the slates being applied in individual strips it's easy to build it in either pristine or derelict condition (or anywhere in between). And with care, you can also pose the doors open or closed. Features: Fully weathered photo-realistic old stone or brick walls & roof slates - main structure requires no painting to acheive a realistically better finish Stone & brick wall interior detailing included Doors can be posed open or closed MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 78mm x W: 42mm x H: 72mm - OO Scale

Dapol Class 57xx Pannier 9669 BR Black Late Crest (O)

Class 57xx Pannier 9669 BR Late Crest The 5700 class were introduced in 1929, whilst the 8750 class followed in 1933 and by 1950 863 locomotives had been constructed, making this perhaps the most successful 0-6-0. G.W.R. Classification: Group C, Route Blue, changed to yellow under B.R. B.R. Classification: 3F. Designed for shunting and short freight workings, however it soon became clear that other duties could be performed such as branch passenger working and mainline freight, being widespread across the system. The 8750 class can be distinguished from the 5700 class by the totally enclosed larger cab. Whistle shields and bunker steps with handrails were added from 1936. A new water feed was introduced in 1942 with the clack valves being fitted inside a case on top of the boiler in front of the dome, which became standard for builds after 1944. Between 1956 and 1963, thirteen 5700 locomotives were sold to the London Transport being painted in the attractive lined red livery. The NCB bought five 5700 locomotives between 1959 and 1965, with number 7754 still working in 1975. Last of class withdrawn: 1966. Preserved examples: 3650, 3738, 4612, 5764/L95, 5775/L89, 5786/L92, 7714, 7715/L99, 7752/L94, 7754, 7760/L90, 9600, 9629, 9642, 9681, 9682 Features of the 57XX & 8750 include: Diecast Chassis and footplate for excellent adhesion and pulling power Powerful 5 pole motor providing fine power control Beautifully detailed body with correct body type variations applied where relevant with many separately added details Partial representation of working inside motion and many other exquisite fine details including: Four cabs for original 57XX, Later 57XX, 8750 Collett cab and London Transport cab Sprung Buffers Removable roof, secured with magnets for ease of fitting engine crew Working cab doors, where fitted Flickering fire box glow Ash pan with correct double brake rodding Expertly applied livery Wheels conform to the new O Gauge standard, suitable for O Super Fine DCC Ready with a 21 pin decoder socket - O Scale

Scenecraft Narrow Gauge (NG7) Metal Water Tank

Narrow Gauge (NG7) Metal Water Tank This metal water tank plays an essential role in the operation of any steam-worked railway, the provision of water. With a lattice base holding the metal tank above, water is supplied via gravity through a hose connected to the tank – the valve for which is chain operated and on the Scenecraft model, this feature is replicated with real metal chain. Whatever the setting, this model is vital to keep your Bachmann Narrow Gauge steam locomotives watered and ready for service. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - O-16.5 (NG7) Scale

EFE Rail LSWR Adams T3 560 SR Lined Maunsell Green

LSWR Adams T3 560 SR Lined Maunsell Green The first LSWR T3 Class locomotive was built in 1892 and 125 years later, the T3 was thrown into the spotlight when the National Railway Museum donated the sole preserved example, No. 563, to the Swanage Railway Trust. Ever since this controversial move there has been a desire to see a OO scale model of this Victorian masterpiece, and now, we are delighted to fulfil those wishes with this brand-new model developed for Bachmann’s EFE Rail range. Employing a large number of diecast metal components to provide the optimal weight distribution needed for this 4-4-0 locomotive to perform at its best, the EFE Rail T3 is powered by a five pole motor and flywheel which is geared to the rear driving axle. DCC provision comes in the form of a Next18 decoder socket mounted in the tender, where a speaker is also fitted, meanwhile within the cab of the model a firebox lighting system has been installed which operates on both analogue and DCC. An innovative loco-to-tender coupling design provides both integral electrical connections and a close coupling feature, whilst at either end of the model NEM coupling pockets are fitted and sprung metal buffers are mounted on each bufferbeam. Each model sports an array of locomotive- and era-specific detailing as appropriate, all of which is highlighted by the ornate livery application. Details on this Model: Pristine SR Lined Maunsell Green livery Running No. 560 Etched Numberplates* Adams Boiler Drummond Chimney Adams Smokebox Door Rivetted Smokebox Saddle Traditional Suspension Fluted Coupling Rods Rear Bogie Wheel Splashers* Single Whistle Welded Lamp Irons SR Disc Head Signals* Tender Coal Rails *supplied separately for optional fitting Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 228mm (over couplings) Five pole motor with flywheel mounted in the locomotive, driving the rear set of driving wheels Electrical pickup from all driving wheels and tender wheels Separate metal bearings fitted to each driving wheel axle and each bogie wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis fitted to both the locomotive and tender Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Discreet snap-together locomotive to tender drawbar with integral close coupling mechanism and electrical connections Sprung front bogie Front bogie features a clip-in front section with optional blank filler or coupling adapter with integral coupling pocket to NEM362 standards Tender features a close coupling mechanism which is fitted with a coupling pocket to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Firebox lighting with twin LEDs operating on DC and DCC Textured filter in the firebox hole to simulate a burning coal fire Twin speakers installed in the tender of all models for optimum sound reproduction - Era 3 - OO Scale

Rapido UK SECR O1 's1065' BR Plain Black (Sunshine Lettering)

SECR O1 's1065' BR Plain Black (Sunshine Lettering) Features: No.S1065 BR plain black (?sunshine? lettering) Tapered buffers Riveted bufferbeams Steam heating pipes (in detail bag) Tender water gauge Can motor and flywheel Next18 decoder socket in tender Plunger loco pickups Tender wheel bearing pickups Firebox glow Twin speakers in tender NEM pockets front and rear Cosmetic scale coupling Route indicator discs in detail bag - OO Scale

Rapido UK Andrew Barclay ‘Caledonia’ Fireless '2126' GloucesterCorporation

Andrew Barclay ‘Caledonia’ Fireless '2126' Gloucester Corporation Features: Andrew Barclay 0-4-0 ‘Caledonia’ Fireless Works No. 2126 Gloucester Corporation livery Angled reservoir supports Late style buffer guides Reducing valve fitted Water tank and injector fitted Die-cast metal and injection moulded plastic construction High quality motor and mechanism E24 decoder socket High level of detail with plenty of separately fitted parts Optional user-fitted cab window shutters, doors and lamps. NEM 363 dovetail coupling mount - OO Scale

Rapido UK Ivor the Engine Train Pack

Ivor the Engine Train Pack Features: Ivor the Engine, with working headlamps and glowing dragon egg in the firebox Two open/sheep wagons Full range of sounds and dialogue from the original colour animations on DCC SOUND versions 2D cardboard figures with bases for Jones the Steam, Dai Station, Idris the Dragon and three sheep, all produced from the original animation artwork Fold-up cardboard engine shed and water tower. A brand-new Ivor the Engine story written and illustrated by Daniel Postgate Special presentation box Compatible with other OO gauge products Die-cast metal and injection moulded plastic construction. High quality motor and mechanism. Next18 decoder socket Factory-fitted speaker in all locomotives - OO Scale

Rapido UK Ivor the Engine Train Pack (Sound Fitted)

Ivor the Engine Train Pack (Sound Fitted) Features: Ivor the Engine, with working headlamps and glowing dragon egg in the firebox Two open/sheep wagons Full range of sounds and dialogue from the original colour animations on DCC SOUND versions 2D cardboard figures with bases for Jones the Steam, Dai Station, Idris the Dragon and three sheep, all produced from the original animation artwork Fold-up cardboard engine shed and water tower. A brand-new Ivor the Engine story written and illustrated by Daniel Postgate Special presentation box Compatible with other OO gauge products Die-cast metal and injection moulded plastic construction. High quality motor and mechanism. Next18 decoder socket Factory-fitted speaker in all locomotives - OO Scale

Graham Farish Class 47/0 D1565 BR Green (Small Yellow Panels) DCC Sound

Class 47/0 D1565 BR Green (Small Yellow Panels) DCC Sound The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. This model tells the story of the Class’s early days of service, sporting original features and carrying the iconic two-tone green livery in which the majority of the fleet was outshopped, complete with small yellow warning panels at either end. Features: SOUND FITTED – Fitted with a ESU Loksound V5DCC Sound Decoder Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Detail Specific To This Model: Pristine BR Green (Small Yellow Panels) livery Running No. D1565 Glazed Headcode Panels Displaying Blinds 1E11 and 4N09 Twin Arm Windscreen Wipers High Intensity Headlight Round Buffers Bodyside Step below Cab Door Full Cab Roof Vents Original Three-Piece Radiator Grilles Ribbed Exhaust Panels Spanner Mk3 Roof Boiler Port 1,250 Gallon Water Tanks with Water Chutes Open Bogie-mounted Cab Steps - Era 5 - N Scale

Graham Farish Class 47/0 D1601 BR Green (Small Yellow Panels)

Class 47/0 D1601 BR Green (Small Yellow Panels) The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. This model tells the story of the Class’s early days of service, sporting original features and carrying the iconic two-tone green livery in which the majority of the fleet was outshopped, complete with small yellow warning panels at either end. Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Detail Specific To This Model: Pristine BR Green (Small Yellow Panels) livery Running No. D1601 Glazed Headcode Panels Displaying Blinds 1V54 and 1A92 Twin Arm Windscreen Wipers High Intensity Headlight Round Buffers Bodyside Step below Cab Door Full Cab Roof Vents Original Three-Piece Radiator Grilles Ribbed Exhaust Panels Spanner Mk3 Roof Boiler Port 1,250 Gallon Water Tanks with Water Chutes Open Bogie-mounted Cab Steps - Era 5 - N Scale

Graham Farish Class 47/0 D1565 BR Green (Small Yellow Panels)

Class 47/0 D1565 BR Green (Small Yellow Panels) The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. This model tells the story of the Class’s early days of service, sporting original features and carrying the iconic two-tone green livery in which the majority of the fleet was outshopped, complete with small yellow warning panels at either end. Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Detail Specific To This Model: Pristine BR Green (Small Yellow Panels) livery Running No. D1565 Glazed Headcode Panels Displaying Blinds 1E11 and 4N09 Twin Arm Windscreen Wipers High Intensity Headlight Round Buffers Bodyside Step below Cab Door Full Cab Roof Vents Original Three-Piece Radiator Grilles Ribbed Exhaust Panels Spanner Mk3 Roof Boiler Port 1,250 Gallon Water Tanks with Water Chutes Open Bogie-mounted Cab Steps - Era 5 - N Scale

Hornby SR, Merchant Navy 21C1 'Channel Packet' (TXS Steam Generator)

SR, Merchant Navy 21C1 'Channel Packet' (TXS Steam Generator) Locomotive 21C1 'Channel Packet' was the first of the Merchant Navy class, entering service in 1941 at Salisbury and then Exmouth Junction from 1942. Renumbered '35001' under British Railways in 1948, 'Channel Packet' was allocated to Stewarts Lane from 1957 until rebuilding in 1959. This model features DCC sound and steam functionality to recreate the first of Bulleid’s powerful and iconic Merchant Navy locomotives.  Detail features:  High detail OO gauge model based on extensive research and original works drawings  High detail cab with fully decorated backhead and decorated instrument dials  Opening cab roof vent  Removable simulated coal load with fully detailed tender bunker Accurately modelled Merchant Navy Bullied-Firth-Brown wheels Early 21C1 'widows peak' front end streamlining and chimney arrangement 5000 gallon tender in its original condition with raves yet to be cut back Cast trailing truck Separately fitted nameplate, number plate and company ownership plate Horseshoe smokebox door company plate  Sprung metal buffers Heavy die-cast chassis, pony truck and trailing truck  Electronics & traction features:  Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element)  Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers and HM7000 app control  Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect Adjustable steam output settings via the decoder  Water reservoir for up to 20 minutes of continuous steam running Die-cast connecting rods and valve gear  Powerful 5-pole skew-wound motor  Flywheel with cardan shaft arrangement for smooth running  Oilite main drive bearings  Wheel pickups on tender & driven locomotive wheelsets  Pogo pin wheel pickup arrangement for easy pickup servicing  8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling Front and rear NEM coupling pockets, with narrow tension lock couplings  Optional fit rear flanged wheelset (only recommended for larger layouts with sweeping curves or display purposes)  Please note: This model requires a DCC controller or the HM7000 app to control.  - OO Scale

Graham Farish Class 47/7 47712 'Lady Diana Spencer' BR ScotRail (SF) (N)

Class 47/7 47712 'Lady Diana Spencer' BR ScotRail The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, and the Class 47/7 sub-class is just one example – these locomotives being fitted with extended range fuel tanks and cab-front jumper cables to work push-pull trains in Scotland. No. 47712 ‘Lady Diana Spencer’ was one of the first twelve locomotives converted to a 47/7, having entered works as Class 47/4 No. 47505, and is modelled in the striking BR ScotRail livery with bold grey, white and blue bodyside bands and large yellow ends and cab rooves. The real locomotive survives in preservation today, and has recently been returned to service on the main line, in much the same 1980s condition as depicted by our model. ‘Lady Diana Spencer’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR ScotRail livery Running No. 47712 Named ‘Lady Diana Spencer’ SOUND FITTED – Fitted with a ESU Loksound V5DCC Sound Decoder Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Scottish Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish Class 47/8 47849 BR InterCity (Swallow) (N)

Class 47/8 47849 BR InterCity (Swallow)  The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, resulting in various sub-classes being used to group locomotives that had undergone the same work, or were built with similar features, such as the Class 47/4s which were those locomotives fitted with Electric Train Heating (ETH). Whilst not an official sub-class, some Class 47/4s were fitted with extended range fuel tanks allowing them to work longer distances and such machines were identified by being renumbered into the 478xx series. With their larger fuel tanks, these Class 47s were put to work on cross country routes and following Privatisation, the 47/8s were used by Virgin Cross Country. No. 47849 received its extended range fuel tanks in 1990 and was renumbered from 47570, remaining in InterCity livery long into Privatisation before it was repainted into Virgin colours in 2000 and so making this locomotive suitable for both Era 8 and Era 9 operations. Our new InterCity model takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR InterCity (Swallow) livery Running No. 47849 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cut-Cab Locomotive Cab-Front-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Kickplate below Car Door Partially Plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish Class 47/4 47555 'The Commonwealth Spirit' RF Distribution (N)

Class 47/4 47555 'The Commonwealth Spirit' BR RF Distribution European The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s served on the front line of BR services for many decades and even in the 1990s, some 30+ years after their introduction, they were still being used for top link services, like hauling the Royal Train or in this case, as part of the fleet used for freight services via the then brand new Channel Tunnel linking the UK and the mainland Europe. The Railfreight Distribution European livery, as distinguished by the large lettering on the bodyside and blue roof, was introduced in the mid-1990s and was applied to distinguish those locomotives allocated to traffic flows serving Dollands Moor and the Channel Tunnel Freight Services, which used the Channel Tunnel from its opening in 1994. Class 47/4 No. 47555 ‘The Commonwealth Spirit’, which was something of a celebrity with spotters and enthusiasts, was one of the locomotives selected for this pool and was repainted resplendently into the new livery by Tinsley which added its Yorkshire Rose depot motif to the cab sides in the process. ‘The Commonwealth Spirit’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR Railfreight Distribution European livery Running No. 47555 Named ‘The Commonwealth Spirit’ Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Spanner Mk3 Boiler Port Water Tanks Removed NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish Class 47/7 47712 'Lady Diana Spencer' BR ScotRail (N)

Class 47/7 47712 'Lady Diana Spencer' BR ScotRail The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, and the Class 47/7 sub-class is just one example – these locomotives being fitted with extended range fuel tanks and cab-front jumper cables to work push-pull trains in Scotland. No. 47712 ‘Lady Diana Spencer’ was one of the first twelve locomotives converted to a 47/7, having entered works as Class 47/4 No. 47505, and is modelled in the striking BR ScotRail livery with bold grey, white and blue bodyside bands and large yellow ends and cab rooves. The real locomotive survives in preservation today, and has recently been returned to service on the main line, in much the same 1980s condition as depicted by our model. ‘Lady Diana Spencer’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR ScotRail livery Running No. 47712 Named ‘Lady Diana Spencer’ Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Scottish Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Bachmann SR Bulleid BCC 10" Vents BR (Ex-SR) Malachite Green 'S6736' (OO)

SR Bulleid Brake Comp. Corridor 10" Vents BR (Ex-SR) Malachite Green The much-requested Diagram 2406 Brake Composite Corridor is the latest model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. Built by British Railways in the months following Nationalisation, these BCKs were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey. The Atlantic Coast Express is a prime example of the latter, whereby as many as six BCKs heading for alternative destinations might be coupled to the main set upon departure from London Waterloo, and then progressively removed during the journey to then be hauled as part of a local or branch service, or simply as a single coach, to their final destination. Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR (Ex-SR) Malachite Green livery Running No. S6736 10” Window Ventilators Smooth Bodysides Single Vacuum Brake Cylinder Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 4 - OO Scale

Bachmann SR Bulleid BCC 10" Vents BR (SR) Green 'S6733S' (OO)

SR Bulleid Brake Composite Corridor 10" Vents BR (SR) Green The much-requested Diagram 2406 Brake Composite Corridor is the latest model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. Built by British Railways in the months following Nationalisation, these BCKs were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey. The Atlantic Coast Express is a prime example of the latter, whereby as many as six BCKs heading for alternative destinations might be coupled to the main set upon departure from London Waterloo, and then progressively removed during the journey to then be hauled as part of a local or branch service, or simply as a single coach, to their final destination. Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR (SR) Green livery Running No. S6733S 10” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 5 - OO Scale

Bachmann SR Bulleid BCC 10" Vents BR (SR) Green 'S6739S' (OO)

SR Bulleid Brake Composite Corridor 10" Vents BR (SR) Green The much-requested Diagram 2406 Brake Composite Corridor is the latest model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. Built by British Railways in the months following Nationalisation, these BCKs were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey. The Atlantic Coast Express is a prime example of the latter, whereby as many as six BCKs heading for alternative destinations might be coupled to the main set upon departure from London Waterloo, and then progressively removed during the journey to then be hauled as part of a local or branch service, or simply as a single coach, to their final destination. Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR (SR) Green livery Running No. S6739S 10” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 5 - OO Scale

Bachmann SR Bulleid BCC 10" Vents BR Crimson & Cream 'S6735' (OO)

SR Bulleid Brake Composite Corridor 10" Vents BR Crimson & Cream The much-requested Diagram 2406 Brake Composite Corridor is the latest model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. Built by British Railways in the months following Nationalisation, these BCKs were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey. The Atlantic Coast Express is a prime example of the latter, whereby as many as six BCKs heading for alternative destinations might be coupled to the main set upon departure from London Waterloo, and then progressively removed during the journey to then be hauled as part of a local or branch service, or simply as a single coach, to their final destination. Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR Crimson & Cream livery Running No. S6735 10” Window Ventilators Smooth Bodysides Single Vacuum Brake Cylinder Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 4 - OO Scale

Bachmann SR Bulleid BCC 10" Vents BR Maroon 'W6715W' (OO)

SR Bulleid Brake Composite Corridor 10" Vents BR Maroon The much-requested Diagram 2406 Brake Composite Corridor is the latest model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. Built by British Railways in the months following Nationalisation, these BCKs were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey. The Atlantic Coast Express is a prime example of the latter, whereby as many as six BCKs heading for alternative destinations might be coupled to the main set upon departure from London Waterloo, and then progressively removed during the journey to then be hauled as part of a local or branch service, or simply as a single coach, to their final destination. Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR Maroon livery Running No. W6715W 10” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 5 - OO Scale

Bachmann SR Bulleid BCC 10" Vents BR (Ex-SR) Malachite Green 'S6718' (OO)

SR Bulleid Brake Comp. Corridor 10" Vents BR (Ex-SR) Malachite Green The much-requested Diagram 2406 Brake Composite Corridor is the latest model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. Built by British Railways in the months following Nationalisation, these BCKs were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey. The Atlantic Coast Express is a prime example of the latter, whereby as many as six BCKs heading for alternative destinations might be coupled to the main set upon departure from London Waterloo, and then progressively removed during the journey to then be hauled as part of a local or branch service, or simply as a single coach, to their final destination. Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR (Ex-SR) Malachite Green livery Running No. S6718 10” Window Ventilators Smooth Bodysides Single Vacuum Brake Cylinder Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 4 - OO Scale

Hornby Southern Rail, Class T9 302

Southern Rail, T9 302 This locomotive was completed at the London & South Western Railway’s Nine Elms Works in late December 1900. Of the 66 built, 35 of the T9 Class were completed at Nine Elms, with a further 31 examples built by Dübs & Co at Polmadie in Glasgow. Nicknamed ‘Greyhounds’ as they consistently ran at speeds of up to 85mph, the last in service was No. 30120, which is preserved as part of the National Collection. Originally paired with a conventional six-wheel tender, it received an eight-wheel watercart version in July 1935. Renumbered 30302 after Nationalisation in 1948, it was withdrawn in September 1952. - DCC Ready 21 Pin Socket - OO scale

Hornby BR (Early), Class T9 30338

BR (Early), Class T9 30338 Designed for express passenger work on the London & South Western Railway, 66 of these elegant 4-4-0s were built between 1899 and 1901. Built at the LSWR’s Nine Elms Works, No. 30338 entered service in October 1901 as No. 338 and lasted in service until withdrawn by British Railways in April 1961, having completed a respectable 59 years and six months. This locomotive was the last of the class to be built at Nine Elms and had a wider cab and revised splashers compared to earlier class members. It was also paired from new with an eight-wheel water-cart tender. - DCC Ready 21 Pin Socket - OO scale

Hornby Class 66 66850 'David Maidment OBE' Colas (TT) (Sound Fitted)

Class 66 66850 'David Maidment OBE' Colas (TT) (Sound Fitted) This model will feature directional and cab lighting. Night and day headlights will also be included. All the Class 66 models have 12 axles for the current pick-up and both bogies are motor-driven. - SOUND FITTED *Requires HM7000 APP or DCC controller to operate sounds and drive model. (Will not operate on analogue) - Era 11 - TT:120 Scale

Hornby BR M7 Class 0-4-4T 30244 - Era 3

BR M7 Class 0-4-4T 30244 - Era 3 Includes: - Rare Malachite Green Condition - British Railways 'Post War' Lined Malachite Green - Cab and body detailing - All wheel electrical pick up - 5 pole motor - 8 PIN DCC Ready socket - NEM couplings and pockets - Accessory bag - OO Scale

Hornby Class 66 66850 'David Maidment OBE' Colas Rail (TT)

Colas Rail, Class 66, Co-Co, 66850, 'David Maidment OBE' This model will feature directional and cab lighting. Night and day headlights will also be included. All the Class 66 models have 12 axles for the current pick-up and both bogies are motor-driven. - DCC Ready NEXT18 Socket - Era 11 - TT:120 Scale

Graham Farish LMS 10000 BR Green (Late Crest)

LMS 10000 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodyside Steps Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LMS 10001 BR Green (Late Crest)

LMS 10001 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LMS 10001 BR Green (Late Crest) - DCC Sound Fitted

LMS 10001 BR Green (Late Crest) - DCC Sound Fitted The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LMS 10000 BR Black (Early Emblem) - DCC Sound Fitted

LMS 10000 BR Black (Early Emblem) - DCC Sound Fitted The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Four Headcode Lights & Brackets at each end Bodyside Steps Original Exhaust Panels Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 4 - N Scale

Hornby Small Water Tower

Small Water Tower Includes: - Ready made and painted building - Made of resin - Hand painted - Brick base unit - Iron water tank and water detailing - Fine etch windows - Length 8cm / 80mm - Height 6cm / 60mm - Width 4cm / 40mm - OO Scale

Scenecraft Narrow Gauge (NG7) Slate Built Coal Store

Narrow Gauge (NG7) Slate Built Coal Store Coal Stores would be used to store the coal that was needed to power steam locomotives. Inspired by a coal store that was used at the Dinorwic Slate Quarry, this Scenecraft model depicts a small slate built building with green highlights. It may be used in combination with the Slate Built Engine Shed (47-0101) and Slate Built Water Tower (47-0102) to depict a full Dinorwic shed scene. Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - NG 7 Scale (O-16.5)

Bachmann LMS Fowler 3F (Jinty) 16564 LMS Black DCC Sound fitted (OO)

LMS Fowler 3F (Jinty) 16564 LMS Black DCC Sound fitted Features: Pristine LMS Black livery Running No. 16564 Running Plate-mounted Sandbox Fillers, accessed via the Water Tank Keyholes NEM Coupling Pockets Sprung Buffers Powerful 3 Pole Motor SOUND FITTED - Fitted with a ESU LokSound Micro V5DCC Sound Decoder Length 127mm - Era 3 - OO Scale The ‘Jinty’ is a timeless classic and we are delighted to welcome this LMS workhorse back to the Bachmann Branchline OO scale range with this model of No. 16564 in LMS Black livery. Taking advantage of the technical upgrades undertaken to the popular Branchline model a few years ago, the ‘Jinty’ combines a powerful 3 pole motor with a Next18 DCC decoder socket and has space for a speaker for those wishing to add sound – or why not opt for our SOUND FITTED model which has a Speaker and DCC Sound Decoder pre-fitted. The Bachmann Branchline model combines a chassis that is sure to provide smooth and powerful running and which is detailed with brake blocks, brake rigging, sandboxes and sandpipes, with a high fidelity bodyshell that is mounted to a diecast running plate. The model is adorned with numerous separately-fitted detail parts including the handrails, lamp irons and vacuum pipes, whilst the safety valves are also separate additions and are of metal construction. Inside the cab a detailed boiler back-head can be found, decorated to the same high standard as the exterior of the model with its exquisite livery application using authentic colours, logos and fonts.  

Bachmann LMS Fowler 3F (Jinty) 47406 BR Black (Early) DCC Sound (OO)

LMS Fowler 3F (Jinty) 47406 BR Black (Early) DCC Sound  Features: Locomotive is Preserved Pristine BR Black (Early Emblem) livery Running No. 47406 Running Plate-mounted Sandbox Fillers, accessed via the Water Tank Keyholes NEM Coupling Pockets Sprung Buffers Powerful 3 Pole Motor SOUND FITTED - Fitted with a ESU LokSound Micro V5DCC Sound Decoder  Length 127mm - Era 4 - OO Scale The ‘Jinty’ is a timeless classic and we are delighted to welcome this LMS workhorse back to the Bachmann Branchline OO scale range with this model of preserved locomotive No. 47406 in BR Black with Early Emblem. Taking advantage of the technical upgrades undertaken to the popular Branchline model a few years ago, the ‘Jinty’ combines a powerful 3 pole motor with a Next18 DCC decoder socket and has space for a speaker for those wishing to add sound – or why not opt for our SOUND FITTED model which has a Speaker and DCC Sound Decoder pre-fitted. The Bachmann Branchline model combines a chassis that is sure to provide smooth and powerful running and which is detailed with brake blocks, brake rigging, sandboxes and sandpipes, with a high fidelity bodyshell that is mounted to a diecast running plate. The model is adorned with numerous separately-fitted detail parts including the handrails, lamp irons and vacuum pipes, whilst the safety valves are also separate additions and are of metal construction. Inside the cab a detailed boiler back-head can be found, decorated to the same high standard as the exterior of the model with its exquisite livery application using authentic colours, logos and fonts.  

Hornby Water Tower (TT)

Water Tower  Enhance your layout with this water tower. Your layout can be brought to life quickly and simply, as you can immediately build up station, town and village scenes without the need to wait for glue to dry. These buildings are pre-formed and pre-decorated, it simply could not be easier to add this to your growing layout. - TT:120 Scale

Graham Farish LMS 10001 BR Lined Green (Late Crest) 10001

LMS 10001 BR Lined Green (Late Crest) 10001 The Graham Farish model of No. 10001 is a highly detailed masterpiece in miniature, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of the prototype, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a coreless motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. The Next18 DCC decoder socket and a pre-fitted speaker make it easy to equip these models for DCC and even add sound, or why not opt for our SOUND FITTED model and enjoy realistic sound effects straight out of the box – whether you’re running on analogue or DCC! Coupled with No. 10000, the LMS Twins will make the perfect addition to any early-BR layout. Features: Pristine BR Lined Green (Late Crest) livery Running No. 10001 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - Era 5 - N Scale

Bachmann Class 31/4 Refurbished 31407 - Mainline Freight

Class 31/4 Refurbished 31407 - Mainline Freight The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine Mainline Freight Blue livery Running No. 31407 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights - Era 8 - OO Scale

Scenecraft SR Water Column and Arm (N)

SR Water Column and Arm This Scenecraft model depicts a SR Water Column that would have been common across the south of England when steam engines were in use. This water column could be placed in a depot, on a station platform or anywhere else where a locomotive may have needed to take on water. Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - N Scale  

Bachmann Class 31/1 Refurbished 31149 BR Railfreight (RS) - Sound Fitted

Class 31/1 Refurbished 31149 BR Railfreight (Red Stripe) - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight (Red Stripe) livery Running No. 31149 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31180 BR Railfreight (RS) - Sound Fitted

Class 31/1 Refurbished 31180 BR Railfreight (Red Stripe) - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight (Red Stripe) livery Running No. 31180 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31304 BR Railfreight (PS) - Sound Fitted

Class 31/1 Refurbished 31304 BR Railfreight Petroleum Sector - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight Petroleum Sector livery Running No. 31304 Etched Depot Plaque and BR Double Arrow Included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31319 BR Railfreight (PS) - Sound Fitted

Class 31/1 Refurbished 31319 BR Railfreight Petroleum Sector - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight Petroleum Sector livery Running No. 31319 Etched Depot Plaque and BR Double Arrow Included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31319 BR Railfreight (PS) Deluxe Sound

Class 31/1 Refurbished 31319 BR Railfreight Petroleum Sector - Deluxe Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight Petroleum Sector livery Running No. 31319 Etched Depot Plaque and BR Double Arrow Included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31407 Mainline Freight - Sound Fitted

Class 31/4 Refurbished 31407 Mainline Freight - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine Mainline Freight Blue livery Running No. 31407 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31407 Mainline Freight Deluxe SoundFitted

Class 31/4 Refurbished 31407 Mainline Freight - Deluxe Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine Mainline Freight Blue livery Running No. 31407 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31435 BR Blue - Sound Fitted

Class 31/4 Refurbished 31435 BR Blue - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Blue livery Running No. 31435 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips Electric Train Heating (ETH) - Era 8 - OO Scale  

Scenecraft Brick Base Water Tower Red (N)

Brick Base Water Tower Red Water towers were a vital part of railway infrastructure during the days of steam locomotives, often being positioned near yards, depots, stations and other facilities. This Brick Base Water Tower with red window frames from Scenecraft would fit perfectly on any layout depicting areas where steam locomotives are being used or maintained. Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting - N scale

Bachmann GWR 94XX Pannier Tank 9463 BR Black (Late Crest) DCC S/F

GWR 94XX Pannier Tank 9463 BR Black (Late Crest) The 94xx Pannier Tank returns to the Bachmann Branchline range and with its unconventional appearance – with large water tanks and extended smokebox – this model will bring a real presence to any model railway. A quintessential part of the GWR for many decades, the Pannier Tank design was developed and refined before the 94xx, the final design of GWR tank engine, was produced. No. 9466, as depicted by this model, one of only two preserved examples, found fame after returning to steam in the mid-1980s and operated on the mainline hauling ‘Steam on the Met’ rail tours. Features: Pristine BR Black (Late Crest) livery Running No. 9463 Accessory Pack NEM Coupling Pockets Sprung Buffers Powerful Coreless Motor Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker Fitted SOUND FITTED – Fitted with a ESU Loksound V5DCC Sound Decoder Length 138mm Take a closer look at the Branchline model and you will see a wealth of detail, from the separately fitted pipe runs that extend all the way from the front bufferbeam to the back, to the modelling of the inside motion which is authentically decorated too. There are handrails aplenty – all separately fitted of course – whilst the metal lamp brackets, separate smokebox door dart and whilst with guard and supply pipes all catch the eye. Sprung buffers are fitted at the front and rear along with a copper cap to the chimney. Look inside the cab and a full complement of controls and dials is present, all decorated accordingly, which is only added to by the firebox lighting system which adds a further dimension of realism to every model. Technically the 94xx shines as well, with a Next18 DCC decoder socket paired with an integrated speaker making SOUND FITTED models an option if you wish to enjoy sound effects when operating your model railway. The powerful coreless motor drives the rear axle and electrical collection comes from all wheels, whilst each axle is fitted with a pair of separate metal bearings. - Era 5 - OO Scale

Rapido UK Titfield Thunderbolt Deluxe Train Pack (DCC Sound Fitted)

Titfield Thunderbolt Deluxe Train Pack (DCC Sound Fitted) Part of the Titfield Thunderbolt Collection. Includes: - Locomotive ‘Thunderbolt’ (DCC Sound fitted) - Sound functions include phrases said by the various characters thoughout the film. - Pressure gauge mounted on water gauge - Livery as seen in the film. - Complete with three 3D printed colour figures of Reverend Weech, The Bishop of Welchester and The Squire. - Die-cast metal and injection moulded plastic construction. - High quality motor and mechanism. - Next18 decoder socket. - Lots of separately fitted details. - ‘Loriot Y’ plus Dan’s House complete with interior - Toad No.W68740 - Commemorative Booklet Information and history: “We want the Titfield Thunderbolt!” – Rapido Trains UK launches range of The Titfield Thunderbolt models with FIVE new 1:76 scale models fully licensed by STUDIOCANAL. Rapido Trains UK is delighted to reveal a range of models inspired by The Titfield Thunderbolt that will be available in time to celebrate the 70th anniversary of the film’s release in 2023. These will be the most accurate The Titfield Thunderbolt models ever produced and are being developed with full co-operation of STUDIOCANAL, which owns the rights to this seminal railway film. The Titfield Thunderbolt tells the story of group of villagers determined to save their branch line after British Railways announces its closure. When a rival bus company sabotages the newly acquired train prior to an official inspection, the villagers resurrect the line’s first locomotive, Thunderbolt, and, against great odds, obtain permission to keep their line open. The story was inspired by the group of enthusiasts, led by Tom Rolt, who took over the 2ft 3in gauge Talyllyn Railway in 1951 and thus kick-started the railway preservation movement. The film was the first of Ealing Studios’ famous ‘Ealing comedies’ to be filmed in colour and it was released in March 1953.    

Graham Farish BR Standard 5MT with BR1 Tender 73006 BR Lined Black L/C S/F

BR Standard 5MT with BR1 Tender 73006 BR Lined Black L/C - Sound Fitted The Graham Farish model brings all the power and presence of the prototype to N scale and this masterpiece in miniature certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, brass chimney and safety valves and separate pipework running from below the cab to the injectors on the boiler. Inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls, whilst below the running plate, the Walschaerts valve gear is something to behold, especially when the locomotive is in motion. A powerful coreless motor provides drive to the centre driving wheels and each driving wheel is fitted with separate metal bearings whilst a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times. With SOUND FITTED, you can start enjoying authentic sound effects as soon as you place this model on your layout. FEATURES: Pristine BR Lined Black (Late Crest) livery Running No. 73006 Coupled to a BR1 Tender Accessory Pack NEM Coupling Pockets Powerful Coreless Motor Loco-drive Mechanism Tender Pick-ups Speaker Fitted SOUND FITTED - Fitted with a Zimo MS590N18 Sound Decoder Length 136mm - Era 5 - N Scale

Graham Farish BR Standard 5MT with BR1 Tender 73006 BR Lined Black (Late Crest

BR Standard 5MT with BR1 Tender 73006 BR Lined Black (Late Crest) The Graham Farish model brings all the power and presence of the prototype to N scale and this masterpiece in miniature certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, brass chimney and safety valves and separate pipework running from below the cab to the injectors on the boiler. Inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls, whilst below the running plate, the Walschaerts valve gear is something to behold, especially when the locomotive is in motion. A powerful coreless motor provides drive to the centre driving wheels and each driving wheel is fitted with separate metal bearings whilst a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times. FEATURES: Pristine BR Lined Black (Late Crest) livery Running No. 73006 Coupled to a BR1 Tender Accessory Pack NEM Coupling Pockets Powerful Coreless Motor Loco-drive Mechanism Tender Pick-ups Speaker Fitted Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 136mm   - Era 5 - N Scale

Bachmann Class 37/0 Centre Headcode 37371 BR Railfeight (RS) DCC Sound

Class 37/0 Centre Headcode 37371 BR Railfeight (Red Stipe) DCC Sound Fitted The British Rail Class 37 is a favourite among enthusiasts and modellers alike and, having been a firm fixture in the Bachmann Branchline OO scale range for many years, in 2022 an all-new model of this iconic locomotive was launched. Built to unprecedented levels of accuracy and fidelity, the new Branchline model incorporates the latest technology and shares many common features and specifications with the award winning Bachmann Branchline Class 47. Finished in BR Railfreight Red Stripe livery, this Class 37/0 depicts No. 37371 and is supplied complete with SOUND FITTED. Following in the footsteps of the Class 47, our all-new OO scale Class 37 has been designed from the rails up to ensure this classic locomotive is modelled in all its glory. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new 37 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an exceptional array of lighting features, our Dual Fitted speaker system is fitted to all models bringing this SOUND FITTED model to life. FEATURES: Pristine BR Railfreight (Red Stripe) livery Running No. 37371 SOUND FITTED - Fitted with a Zimo MS450P22 DCC Sound Decoder Length 245mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Central Headcode Panels – Plated and fitted with Marker Lights Headboard Clips High Intensity Headlight Bufferbeam Valance Removed Coupling Bash Plate Oval Buffers Original Windscreen English Electric Cantrail Grilles Welded Boiler Roof Blanked Boiler Port and Safety Valves Sealed Water Filler Door and Plated Access Steps Fabricated Bogies Original Speedo Drive Twin Fuel Tanks with Ex-Water Tank Gauges Plated Over - Era 8 - OO Scale

Scenecraft Depot Water Tower (OO)

Depot Water Tower This Scenecraft model depicts a Depot Water Tower that would have been used to collect and store water, ensuring that there is always enough for the various steam locomotives in the depot. The tower also has a ladder and platform so that the water levels could be inspected. MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout - OO scale

Metcalfe N Water Wheel (Mini Kit) N Scale

Water Wheel (Mini Kit) Water chute comes as plain card, simply cover with your stone/brick of choice. - N Scale

Metcalfe OO Water Wheel (Mini Kit) OO Scale

Water Wheel (Mini Kit) A intricate wooden waterwheel, perfect for creating watermills. Water chute comes as plain card, simply cover with your stone/brick of choice.  - OO Scale

Hornby Trackside Accessories

Trackside Accessories This accessories pack is perfect for adding those subtle yet realistic details to your railway layout, as well as a gift for the railway enthusiast in your life This pack contains: huts telegraph pole water crane loading gauge whistle sign mile and gradient posts   - OO scale

Heljan BR Class 26/1 BR Green (with tablet catcher recess) Unnumbered

BR Class 26/1 BR Green (with tablet catcher recess) Unnumbered Includes: - Detailed Diesel locomotive - Cab interiors - Recess for tablet catcher in body side. - Accessory bag (including Tablet catcher and plough detail) - Grill detail - Original water tank feat - Bogie detailing - Sprung buffers - Working head and tail lights - High-performance twin motor with fitted flywheel - All-wheel drive and pick-up - Separately switchable cab, tail and engine room lights - ESU XL pin decoder interface - Provision for DCC sound. - O Scale  

Scenecraft Watermill Race & Gate (OO)

Watermill Race & Gate Includes - Ready made Resin structure - Pre-painted and ready to place on your model - Can be added to the Watermill building - OO Scale

Parkside BR 18 Ton Sand Wagon

BR 18 Ton Sand Wagon Includes - Plastic kit - Metal components - Wheels with bearings - Option for compensated chassis - Sprung buffers (to assemble) - Water-slide Transfers - Kit requires glue and paint to complete NOT included - O Scale

Parkside GWR Mink D Goods Van

GWR Mink D Goods Van Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside LNER 12 Ton Van

LNER 12 Ton Van Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside LNER 20 Ton Hopper Wagon 100 (PC80)

LNER 20 Ton Hopper Wagon 100 Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside LNER Extra Long CCT

LNER Extra Long CCT Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside LNER Horse Box

LNER Horse Box Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside 5 Plank Mineral Wagon RCH 1923

5 Plank Mineral Wagon RCH 1923 Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside BR 12 Ton Fruit Van

BR 12 Ton Fruit Van Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside BR 21 ton Coal Hopper

BR 21 ton Coal Hopper Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside BR 21 Ton Mineral Wagon (PC32)

BR 21 Ton Mineral Wagon Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside BR Ale Pallet Wagon

BR Ale Pallet Wagon Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside BR Shock Absorbing Wagon

BR Shock Absorbing Wagon Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside GWR 00 12 Ton China Clay Wagon (013)

GWR 00 12 Ton China Clay Wagon (013) Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside GWR 10 Ton Open Goods Wagon 011/15

GWR 10 Ton Open Goods Wagon 011/15 Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside GWR 6 Ton Insulated Van Mica B X7

GWR 6 Ton Insulated Van Mica B X7 Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Parkside GWR Horse Box N13

GWR Horse Box N13 Includes - Plastic kit - Wheels - Waterslide Transfers - Requires glue and paint to complete NOT included - OO Scale

Scenecraft Wigmore Watermill (OO)

Scenecraft Wigmore Watermill - OO scale - Ready Made

Water Tower (Hornby)

Water Tower Includes - Metal Water crane - Sticker finishes include brick or stone for the walls and slate roofing) - Separate Ladder detail - Kit requires cutting tools and suitable adhesive NOT included - OO scale

Hornby Building Extension Pack 2

Building Extension Pack 2 Includes - Water Tower with Sticker building finishes and Diecast water crane - Railway Cottage (clip together construction with acetate windows) - Trackside Accessories with telegraph posts, loading gauge, trackside signage - Lineside Huts - OO scale

Scenecraft Lucston Water Crane (OO)

Lucston Water Crane  Includes - Base for platform or baseboard mounting  - Fine detail - useful addition to an engine shed or platform end  - Resin structure - OO scale

Peco Water Cranes

Water Cranes - plastic kit requires assemble - requires glue and paint to complete and enhance detail (NOT Included) - OO scale

Peco Water Tower

Water Tower - Makes traditional steam era water tower and bag pipe - Plastic kit requires glue and paint to complete NOT included - OO scale

Metcalfe N Watch Tower - N Scale

Castle Water Tower - Card Kit - Requires Glue to Complete - N Scale

Kestrel Designs Water Tower Kit

Kestrel Designs - Water Tower Kit

Ratio Water Crane & Fire Devil (N)

Water Crane & Fire Devil - plastic kit - N scale

Ratio Water Trough

Water Trough - plastic kit - N scale

Ratio Round Water Tower

Round Water Tower - plastic kit - N scale

Ratio Square Water Tower

Square Water Tower - plastic kit - N scale

Ratio Engine Shed Kit N Scale

Engine Shed Kit Provide a home for your locos, giving them cover from the elements and a place for repairs and maintenance. It is normal to find a water tower (Ratio Water Tower 215 and Large Water Tower 256 kits), and coaling stage (Ratio Loco Servicing Depot Ref 206) nearby, and an inspection pit (Peco NB-56F) was also often included. Can be used as either a single or through shed. Multiple kits can be joined together if required. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Technical Specification: Length: 95mm Width: 48mm - N Scale

Ratio Large Water Tower

Large Water Tower - plastic kit - N scale

Wills Water Tower & Stone Base

Water Tower & Stone Base A raised water supply for an engine shed or to supply platform water cranes (See Ratio 413 and Peco LK-2 Water Cranes, also Ratio 550 Water Troughs). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 66mm x 55mm. - Plastic Kit - OO scale

Wills Water Wheel & Sluice Gates

Water Wheel & Sluice Gates - plastic kit - OO scale

Wills Consevatory & garden Seat & Water Butt

Consevatory & garden Seat & Water Butt Add a conservatory to a property on your layout. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 55mm x 33mm - Plastic Kit - OO scale

Ratio Water Trough 30" (760mm)

Water Trough 30" (760mm) - plastic kit - OO scale

Ratio Water Crane & Fire Devil

Water Crane & Fire Devil - plastic kit - OO scale

Ratio Water Tower (OO)

Water Tower - plastic kit - OO scale

Ratio Water Tower - GW Pillar (conical or flat top)

Water Tower - GW Pillar (conical or flat top) - plastic kit - OO scale

Ratio Large Water Tower (760mm)

Large Water Tower (760mm) - plastic kit - OO scale

Hornby LNER A4 Class 4-6-2 4468 ‘Mallard’ - Era 3

LNER A4 Class 4-6-2 4468 ‘Mallard’ in 1938 condition Includes - Accessory bag includes brake rigging and vacume pipes - 3 Pole motor with brass fly wheel - 8 PIN DCC Ready socket (NOTE: This model is compatiable with the HM7000TXS Sound File decoders. This will require the Hornby HM7000 App or a suitable Digital Controller to operate) - NEM Couplings and Pockets - Will traverse 2nd raidus curves minimum (R606, R607) - Railroad Range - OO scale