Hornby HM7000: 6 BLE Decoder 6 Pin w/ Fine Wire (No Sound)

HM7000: 6 BLE Decoder 6 Pin w/ Fine Wire (No Sound) Part of the innovative HM7000 range, this new 6-pin Bluetooth® and DCC decoder is designed to get smaller locomotives working on the HM7000 system. The 6-pin connectors are located on the end of flexible wires, giving you more flexibility when installing the decoder in models with limited space. The decoder is designed to supply 1000mA continuous load to the main motor and a peak demand of 1500mA, making it highly suitable for most N scale locos and small TT, HO and OO locomotives. An R7377 Power Bank can be purchased separately and added to this decoder. We recommend for ease you do this during the first install. The Power Bank will keep the loco operating during short power outages when running over dirty track or complex points.

Hornby HM7000: Power Bank Maxi

HM7000: Power Bank Maxi The R7416 Power Bank Maxi is our largest power bank and will keep locomotives with larger motors that require more pulling power, running over any potential dead spots. The space require inside a locomotive for this power bank is 22 x 12 x 10mm.  The Power Bank Maxi can be connected into the current range of HM7000 DCC Bluetooth decoders. A simple plug & play socket means there's no soldering required! Why use one? Your layout will occasionally suffer from dirty track or small electrical dead spots at points and crossings. The small loss of power can cause locomotives to stop, but with DCC Sound Decoders it can also cause the sounds to reset and restart. Avoid both issues by fitting a Power Bank. Perfect locomotive running and optimal control! (The Power Bank is not suitable for use without an HM7000 decoder, connecting it directly to other decoders or directly to the wiring of a model locomotive may cause damage to the Power Bank, your locomotive or your non-HM7000 decoder). For small locomotives we have a smaller Power Bank available R7377 Power Bank

Hornby LB&SCR 6 Wheel Third Class Brake Coach 106

LB&SCR 6 Wheel Third Class Brake Coach 106 This charming LB&SCR 6-Wheel 3rd Class Brake Coach No. 106 looks incredible in its London Brighton & South Coast Railway Lined brown livery. The distinctive 6-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s.  Perfect for pairing with the delightful A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 6-wheel 3rd Class Brake Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory pack Livery: LBSCR Lined Brown Gold lettering Painted red seating - OO Scale

Hornby LB&SCR 6 Wheel Third Class Coach 612

LB&SCR 6 Wheel Third Class Coach 612 This charming LB&SCR 6-Wheel 3rd Class Coach No. 612 looks incredible in its London Brighton & South Coast Railway Lined brown livery. The distinctive 6-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s.  Perfect for pairing with the delightful A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 6-wheel 3rd Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory pack Livery: LBSCR Lined Brown Gold lettering Painted red seating - OO Scale

Hornby LB&SCR 4 Wheel Passenger Brake Coach 90

LB&SCR 4 Wheel Passenger Brake Coach 90 This charming LB&SCR 4-Wheel Full Brake Coach No. 90 looks incredible in its London Brighton & South Coast Railway Lined brown livery. The distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s.  Perfect for pairing with the delightful A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 4-wheel Full Brake Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory pack Livery: LBSCR Lined Brown Gold lettering Moulded interior - OO Scale  

Hornby LB&SCR 6 Wheel First Class Coach 452

LB&SCR 6 Wheel First Class Coach 452 This charming LB&SCR 6-Wheel 1st Class Coach No. 452 looks incredible in its London Brighton & South Coast Railway Lined brown livery. The distinctive 6-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s.  Perfect for pairing with the delightful A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 6-wheel 1st Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory pack Livery: LBSCR Lined Brown Gold lettering Painted blue seating - OO Scale  

Hornby BR Mk1 TSO 4914 Network South East

BR Mk1 TSO 4914 Network South East The British Railways Mark 1 coach family includes some of the most successful designs in railway history, with thousands constructed and lasting from the early 50’s right up until the present day. In the blue, white and red livery of NSE, this Tourist Second Open No. 4914 is the perfect accompaniment for 1980s and 1990s British diesel locomotives! Model Specification: Highly detailed model of Mk1 Tourist Second Open Defined bogie mouldings Detailed roof and underframe Moulded and painted interior Kinematic NEM coupling mechanism Accessory pack Livery: Network Southeast Crisp paint application using accurate colours and fonts - OO Scale

Hornby BR Mk1 BSK 35010 Network South East

BR Mk1 BSK 35010 Network South East The British Railways Mark 1 coach family includes some of the most successful designs in railway history, with thousands constructed and lasting from the early 50’s right up until the present day. In the blue, white and red livery of NSE, this Brake Second Corridor No. 35010 is the perfect accompaniment for 1980s and 1990s British diesel locomotives! Model Specification: Highly detailed model of Mk1 Brake Standard Corridor Defined bogie mouldings Detailed roof and underframe Moulded and painted interior Kinematic NEM coupling mechanism Accessory pack Livery: Network Southeast Crisp paint application using accurate colours and fonts - OO Scale

Hornby RailRoad: TEA 100T Tanker Esso BRT 20060

RailRoad: TEA 100T Tanker Esso BRT 20060 Being a Railroad product, this TEA tanker painted in all over grey and red with Esso and BRT brandings is a durable, free-running wagon perfect for those looking to bolster their wagon fleet at an affordable price - OO Scale

Hornby RailRoad: TEA 100T Tanker Shell 87155

RailRoad: TEA 100T Tanker Shell 87155 Being a Railroad product, this TEA tanker, finished in Shell's corporate livery and carrying a small TLF Petrol sector decal, is a durable, free-running wagon, perfect for those looking to bolster their wagon fleet at an affordable price. - OO Scale

Hornby RailRoad: 7 Plank Open Wagon C.Dunning & Son Ltd Greenwich 279

RailRoad: 'C Dunning' Open Wagon This RailRoad open plank wagon carries the branding ‘C. Dunning & Son Ltd’ and is an ideal model to add to a steam-period freight train. Private owner wagons were built in their thousands and were used throughout the 20th century to transport goods.  Wagons could be found in countless different liveries belonging to independent companies as well as railway companies. As well as transporting manufactured goods, simple wagons like this could also be found moving loose materials such as coal, stone or sand. - OO Scale

Hornby RailRoad: 7 Plank Open Wagon Faulkner Co. Ltd Coal Coke 234

RailRoad: 'Faulkner' Open Wagon This RailRoad open plank wagon carries the branding ‘Faulkner Co. Ltd’ and is an ideal model to add to a steam-period freight train. Private owner wagons were built in their thousands and were used throughout the 20th century to transport goods.  Wagons could be found in countless different liveries belonging to independent companies as well as railway companies. As well as transporting manufactured goods, simple wagons like this could also be found moving loose materials such as coal, stone or sand. - OO Scale

Hornby RailRoad: 12T Box Van O.M.Raeburn Precision Tools London 32652

RailRoad: 'O Raeburn' Box Van Short wheelbase vans were a prevalent feature of the railways in the 1900s, used for transporting all manner of dry goods, such as canned items, boxed commodities, or manufactured tools. Many such vans eventually ended up in private ownership and this RailRoad OO gauge model depicts a fictional company: ‘O. M. Raeburn’ based in London who specialise in the fabrication of precision tools. - OO Scale

Hornby RailRoad: Class 800 MC Coach 4 Great British Railways

RailRoad: Class 800 MC Coach 4 Great British Railways Utilising the popular Railroad Class 800 tooling, we are thrilled to present a vision of the future: an Azuma in Great British Railways livery!  Based on official documentation of what passenger trains will look like under GBR, this Class 800 Motor Standard Coach makes for a striking addition to your train set or model railway when paired with R30561 Class 800 train pack!  Why not form a complete 5 car train by adding further motor standard coaches, available separately! Model Specification: Railroad specification Class 800 motor standard coach model Durable bodyshell Detailed moulded bogies Matches R30561 Class 800 train pack and other induvial passenger coaches R40570/R40571 Livery: Great British Railways - OO Scale

Hornby RailRoad: Class 800 MS Coach 2 Great British Railways

RailRoad: Class 800 MS Coach 2 Great British Railways Utilising the popular Railroad Class 800 tooling, we are thrilled to present a vision of the future: an Azuma in Great British Railways livery!  Based on official documentation of what passenger trains will look like under GBR, this Class 800 Motor Standard Coach makes for a striking addition to your train set or model railway when paired with R30561 Class 800 train pack!  Why not form a complete 5 car train by adding further motor standard coaches, available separately! Model Specification: Railroad specification Class 800 motor standard coach model Durable bodyshell Detailed moulded bogies Matches R30561 Class 800 train pack and other induvial passenger coaches R40571/R40572 Livery: Great British Railways - OO Scale

Hornby RailRoad: Class 800 MS Coach 3 Great British Railways

RailRoad: Class 800 MS Coach 3 Great British Railways Utilising the popular Railroad Class 800 tooling, we are thrilled to present a vision of the future: an Azuma in Great British Railways livery!  Based on official documentation of what passenger trains will look like under GBR, this Class 800 Motor Standard Coach makes for a striking addition to your train set or model railway when paired with R30561 Class 800 train pack!  Why not form a complete 5 car train by adding further motor standard coaches, available separately! Model Specification: Railroad specification Class 800 motor standard coach model Durable bodyshell Detailed moulded bogies Matches R30561 Class 800 train pack and other induvial passenger coaches R40571/R40572 Livery: Great British Railways - OO Scale

Hornby BR Tavern Coach Pack ‘At the Sign of the Dolphin’

BR Tavern Coach Pack ‘At the Sign of the Dolphin’ This expertly detailed and colourful Southern Region Tavern Car twin pack offers modellers a unique set of restaurant cars, which feature intricate paint and print application, crisply moulded details, and interior lighting. This latest release includes Tavern Car No. S7894 and Composite Saloon No. S7835, and both are decorated in Crimson & Cream livery and named ‘At the Sign of the Dolphin’. Model Specification: Highly detailed models of KB and RCO Tavern Cars Defined bogie mouldings Detailed roof mouldings Separately fitted underframe and gangway end equipment Moulded interior Interior Lighting Kinematic NEM coupling mechanism Accessory Pack Tooling: Original condition Tavern Car without side beading Original condition Composite Saloon with high windows and without side beading Livery: BR Crimson & Cream Faux-pub exterior painted on Tavern Car Accurate colours and fonts - OO Scale  

Hornby RailRoad: Class 73 73235 Intercity Swallow

RailRoad: Class 73 73235 Intercity Swallow The Railroad Class 73 is the perfect mixed traffic locomotive and is ideally suited for both use on InterCity services and short freight workings across Southern England. Decorated in the colourful tri-colour scheme of BR InterCity Swallow, 73235 would be a small but mighty addition to your model railway collection. Model specification: Railroad specification Class 73 model Durable bodyshell Reliable motor for continued and long-lasting use Accurate livery application Electronics: 21-pin DCC decoder socket compatible with HM7000 system Livery: BR InterCity Swallow Headcodes displaying ‘20’ at one end and red markers at the other - OO Scale

Hornby RailRoad: Class 73 73235 Intercity Swallow (Sound Fitted)

RailRoad: Class 73 73235 Intercity Swallow (Sound Fitted) The Railroad Class 73 is the perfect mixed traffic locomotive and is ideally suited for both use on InterCity services and short freight workings across Southern England. Decorated in the colourful tri-colour scheme of BR InterCity Swallow, 73235 would be a small but mighty addition to your model railway collection.  This model is fitted with a TXS sound decoder for added realism when running on DCC layouts. Model specification: Railroad specification Class 73 model Durable bodyshell Reliable motor for continued and long-lasting use Accurate livery application Electronics: 21-pin DCC Sound decoder fitted compatible with HM7000 system Realistic sound profile based on recordings of Class 73 locomotives Livery: BR InterCity Swallow Headcodes displaying ‘20’ at one end and red markers at the other - OO Scale

Hornby RailRoad: Class 800 Great British Railways Train Pack

RailRoad: Class 800 Great British Railways Train Pack Utilising the popular Railroad Class 800 tooling, we are thrilled to present a vision of the future: an Azuma in Great British Railways livery! Based on official documentation of what passenger trains will look like under GBR, this Class 800 train pack consisting of a driving car and dummy car makes for a striking addition to your train set or model railway! Model Specification: Railroad specification Class 800 model Durable bodyshell Reliable motor for continued and long-lasting use Directional Lighting DCC Ready Matches induvial passenger coaches R40570/R40571/R40572 Electronics: 21-pin DCC decoder socket compatible with HM7000 system Compatible with R7322 HM7000-21TXS Sound Decoder and speaker Space for HM7070 power bank for uninterrupted running Livery: Great British Railways - OO Scale  

Hornby RailRoad: Peppercorn A1 60163 'Tornado' BR Lined Apple Green

RailRoad: Peppercorn A1 60163 'Tornado' BR Lined Apple Green Peppercorn A1 60163 ‘Tornado’, a true icon of the current railway scene, rejoins the RailRoad range in a new livery scheme: Apple Green with British Railway tender lettering. Designed to be robust this RailRoad model features fully working piston and connecting rods, accurate paint application and DCC capability. Model Specification: RailRoad specification Peppercorn A1 Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: 21-pin DCC decoder socket compatible with HM7000 system Livery: British Railways lined apple green Modern warning flashes - OO Scale  

Hornby RailRoad: Peppercorn A1 60163 ‘Tornado’ BR Apple Green (Sound)

RailRoad: Peppercorn A1 60163 ‘Tornado’ BR Lined Apple Green (Sound Fitted) Peppercorn A1 60163 ‘Tornado’, a true icon of the current railway scene, rejoins the RailRoad range in a new livery scheme: Apple Green with British Railway tender lettering. Designed to be robust this RailRoad model features fully working piston and connecting rods, accurate paint application and DCC capability. Model Specification: RailRoad specification Peppercorn A1 Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius DCC Sound: Pre fitted 21-pin DCC Sound decoder, compatible with HMRA compliant systems and HM7000 High fidelity sound profile assembled from recordings of 60163 Tornado Livery: British Railways lined apple green Modern warning flashes - OO Scale  

Hornby Robert Stephenson’s L&MR ‘Planet’

Robert Stephenson’s L&MR ‘Planet’ Building on the success of our other Era 1 steam locomotives, ‘Planet’ is an impeccable replication of the historic Stephenson design, utilising high quality diecast and plastic mouldings to capture the distinctive shape of the locomotive. Initially available in its preserved condition, this wonderful model will be a great addition to any model railway collection. Model Specification: High detail model of replica L&MR Planet locomotive based on extensive research Diecast locomotive chassis and tender body Coreless motor All-wheel pick up High detail cab backhead Decorated crew figures Separate buffers Numerous separately fitted parts such as steam pipes, control levers, strengthening truss rods, and handrails Accessory Bag Minimum 2nd radius Electronics: Next18 DCC decoder socket compatible with HM7000 system Livery: As preserved in the Manchester Science Museum Wood grain printing on boiler Gold plated dome and boiler details - OO Scale

Hornby RailRoad: GWR County 1023 'County of Oxford' GW Lined Green

RailRoad: GWR County 1023 'County of Oxford' GW Lined Green The ‘County’ Class was the last of the GWR-designed two-cylinder 4-6-0s, with 30 built at Swindon between 1945 and 1947 to the design of Chief Mechanical Engineer, Frederick Hawksworth. This latest RailRoad County Class model depicts No. 1023 ‘County of Oxford’ in Great Western lined green. Model specification: RailRoad specification model of County Class Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: 21-pin DCC Decoder socket compatible with HM7000 Livery: Great Western lined green with GW tender crest Accurate colours and font - OO Scale

Hornby RailRoad: Fowler 3F Jinty 16440 LMS Lined Crimson

RailRoad: Fowler 3F Jinty 16440 LMS Lined Crimson Wearing the vibrant lined crimson livery of the LMS, this RailRoad Fowler 3F Jinty numbered 16440 in preservation condition is perfect for all your shunting needs, regardless of the setting! This 0-6-0 tank locomotive has working running gear and a neatly applied paint scheme. Model Specification: RailRoad specification LMS 3F Jinty Moulded details Working connector rods NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: Analogue Livery: LMS lined crimson as preserved Accurate colours and fonts - OO Scale

Hornby Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke)

Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke) This highly detailed model represents famed 'Spam Can' No.35028 ‘Clan Line’ in British Railways lined green livery with early cycling lion emblem on the tender. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis, pony truck and trailing truck Die-cast connecting rods and valve gear High detail cab and fully decorated backhead with decorated instrument dials Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels 8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible DCC Sound: Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of Merchant Navy locomotives Tender speaker Livery: BR Lined Green with ‘Cycling Lion’ early emblem on tender Clan Line etched nameplates Semi-gloss finish Accurate colours and fonts - OO Scale

Hornby LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke)

LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60002 ‘Sir Murrough Wilson’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights. This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any early British Railways model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Non-Corridor Tender Side valence removed Livery: BR Lined Green Named ‘Sir Murrough Wilson’ Cycling Lion on tender Accurate colours and fonts - OO Scale

Hornby LNER A4 60024 'Kingfisher' BR Exp. Ultramarine (Sound/Smoke)

LNER A4 60024 'Kingfisher' BR Experimental Ultramarine (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60024 ‘Kingfisher’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights.  This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any LNER model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Corridor Tender Side valence removed Livery: BR Express Blue Named ‘Kingfisher’ British Railways lettering on tender Accurate colours and fonts - OO Scale

Hornby GWR Saint 2945 'Hillingdon Court' GWR Lined Green

GWR Saint 2945 'Hillingdon Court' GWR Lined Green We are delighted to present the next run of OO Gauge GWR Saint Class locomotives in this months range launch, with this particular example being No. 2945 ‘Hillingdon Court’ in Great Western lined green. Utilising the same highly acclaimed tooling used on the first run of Saints last year, this latest release takes the model one step further by the inclusion of a revised cab footplate for improved running, as well as being DCC ready via a 21-pin decoder socket, perfect for the HM7000 system. Model Specification: High detail OO Gauge model based on extensive research and original works drawings Die-cast Chassis and Running Plate. Model Weight is 341 grams High detail cab and fully decorated backhead with decorated instrument dials Etched metal nameplates Powerful 5 Pole Skew wound motor Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast Piston Rods & valve gear Fully decorated crew figures Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and Rear NEM coupling pocket Separately fitted lamps. Lamp code can be changed Separately fitted simulated coal load Improved cab footplate design Electronics: HM7000 21-Pin DCC decoder compatible HM7000 Power Bank compatible Illuminated flickering firebox Tooling: Tall Chimney Safety valve with top feeds Later curved footplate Fluted piston rods Early boiler Churchward tender Livery: GWR Lined Green Great Western tender lettering Accurate colours and fonts - OO Scale

Hornby GWR Saint 2980 'Coeur de Lion' GWR Lined Green (Sound/Smoke)

GWR Saint 2980 'Coeur de Lion' GWR Lined Green (Sound/Smoke) We are delighted to present the next run of OO Gauge GWR Saint Class locomotives in this months range launch, with this particular example being No. 2980 ‘Coeur de Lion’ in Great Western lined green. Utilising the same highly acclaimed tooling used on the first run of Saints last year, this latest release takes the model one step further by the inclusion of a DCC Sound decoder and speaker, 2nd generation steam generator, and revised cab footplate for improved running. Model Specification: High detail OO Gauge model based on extensive research and original works drawings Die-cast Chassis and Running Plate. Model Weight is 341 grams High detail cab and fully decorated backhead with decorated instrument dials Etched metal nameplates Powerful 5 Pole Skew wound motor Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast Piston Rods & valve gear Fully decorated crew figures Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and Rear NEM coupling pocket Separately fitted lamps. Lamp code can be changed Separately fitted simulated coal load Improved cab footplate design Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: 21-Pin DCC Sound decoder pre-fitted HM7000 Power Bank compatible Illuminated flickering firebox DCC Sound: Pre-installed Saint Class sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of Saint Class locomotives Tender speaker Tooling: Tall Chimney Later safety valve with Top Feeds Later curved footplate Fluted piston rods Superheated boiler Collett Tender Livery: GWR Lined Green Great Western tender lettering Accurate colours and fonts - OO Scale

Hornby GNR J13 1252 GNR Plain Grey (Sound Fitted)

GNR J13 1252 GNR Plain Grey (Sound Fitted) The Hornby GNR J13/J52 returns for 2026 in the standout GNR grey livery of the early 1900s, numbered 1252. Model Specification: Highly detailed OO gauge model based on extensive research and original works drawings Die-cast boiler, chassis and running plate. Model weight is 235 grams Highly detailed cab and fully decorated backhead with decorated instrument dials Pogo pin wheel pick-up arrangement for easy pick-up servicing Die-cast connecting rods Prototypical size metal handrails with brass stanchions Oilite main drive bearings Opening cab roof vent Sprung metal buffers Front and rear NEM coupling pocket. Rear coupling pocket has a close coupling mechanism Wheel pick-ups on all wheels Accessory bag contains vacuum pipes, lamps and couplings Separately fitted lamps (lamp code can be changed) Separately fitted simulated coal load. DCC Sound: HM7000 21-pin sound decoder fitted High fidelity sound profile of J13/J52 Electronics: Decoder-controlled firebox flicker HM7000 Power Bank compatible Powerful 5-pole skew-wound motor Tooling: Raised Safari cab roof ventilator Double footstep arrangement Coal bunker with coal rails Flush-faced connecting rods Brass Ramsbottom safety valves 3’ 3” built-up chimney GNR tapered buffer stocks Livery: GNR Plain Grey Semi-gloss with matt smokebox Accurate colours and typefaces - OO Scale

Hornby GNR J13 1252 GNR Plain Grey

GNR J13 1252 GNR Plain Grey The Hornby GNR J13/J52 returns for 2026 in the standout GNR grey livery of the early 1900s, numbered 1252. Model Specification: Highly detailed OO gauge model based on extensive research and original works drawings Die-cast boiler, chassis and running plate. Model weight is 235 grams Highly detailed cab and fully decorated backhead with decorated instrument dials Pogo pin wheel pick-up arrangement for easy pick-up servicing Die-cast connecting rods Prototypical size metal handrails with brass stanchions Oilite main drive bearings Opening cab roof vent Sprung metal buffers Front and rear NEM coupling pocket. Rear coupling pocket has a close coupling mechanism Wheel pick-ups on all wheels Accessory bag contains vacuum pipes, lamps and couplings Separately fitted lamps (lamp code can be changed) Separately fitted simulated coal load. Electronics: Decoder-controlled firebox flicker (decoder sold separately) HM7000 21-pin sound decoder compatible HM7000 Power Bank compatible Powerful 5-pole skew-wound motor Tooling: Raised Safari cab roof ventilator Double footstep arrangement Coal bunker with coal rails Flush-faced connecting rods Brass Ramsbottom safety valves 3’ 3” built-up chimney GNR tapered buffer stocks Livery: GNR Plain Grey Semi-gloss with matt smokebox Accurate colours and typefaces - OO Scale

Hornby Dublo: Merchant Navy 35019 'French Line CGT' BR Express Blue

Dublo: Merchant Navy 35019 'French Line CGT' BR Express Blue A further addition to the highly collectable Hornby Dublo range comes in the form of Merchant Navy No. 35019 ‘French Line CGT’, in the vibrant express blue colour scheme of early British Railways. Moulded out of diecast, this high-fidelity model of a classic Bulleid ‘Spam Can’ is the ideal locomotive for collectors of Southern Region stock and Dublo Diecast models. Model Specification: High detail OO gauge model based on extensive research and original works drawings Fully moulded in Diecast Diecast connecting rods and valve gear Accessory ‘RF’ Headboard High detail cab and fully decorated backhead with decorated instrument dials Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels 8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling. Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Accessory bag Minimum 2nd Radius curves Electronics: 21-Pin HM7000 decoder socket compatible with HM7000 system HM7000 Power Bank compatible Livery: BR Lined Express Blue with ‘Cycling Lion’ early emblem on tender French Line CGT etched nameplates Semi-gloss finish Accurate colours and fonts - OO Scale

Hornby A1X 'Terrier' 643 LB&SCR Marsh Brown

A1X 'Terrier' 643 LB&SCR Marsh Brown The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.643 in London Brighton & South Coast Railway Marsh Brown. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes Small cab bunker with no coal rails Westinghouse pump Livery: LB&SCR Marsh Brown Accurate colours and typefaces - OO Scale

Hornby A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company

A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.72 ‘Fenchurch’ in Newhaven Harbour Company lined black. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Rivetted smokebox door Six lamp brackets on front and rear  Low bufferstock with lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump Livery: Newhaven Harbour Company lined black Accurate colours and typefaces - OO Scale

Hornby Playtrains: Tunnel

Playtrains: Tunnel Bring their railway world to life with this exciting tunnel building, designed especially for use with Hornby Playtrains. The perfect way to add scenery and storytelling to your child’s layout, this robust plastic tunnel comes in a simple kit form that’s easy to assemble together.  Once built, it can be configured as either a single or double track tunnel, giving you flexibility as their railway grows. Finished in realistic colours, it adds an authentic touch to their train set while still being tough enough for everyday play.  Children will love guiding their train into the tunnel and waiting for the magical moment it emerges from the “darkness” with its headlight shining — a simple feature that sparks big imagination. Compatible with all Hornby Playtrains toys, it’s an easy way to expand their set, encourage creative layout building, and add even more adventure to every journey around the track.

Hornby Playtrains: Harry Potter Hogwarts Express Train Set (w/ Steam)

Playtrains: Harry Potter Hogwarts Express Train Set (with Sound & Steam) Bring the Magic of the Harry Potter Hogwarts Express Home! Delight your little ones with the Hogwarts Express, a toy train set designed to spark imagination and creativity for children aged 5–8.  Perfect for boys and girls, this beautifully crafted set captures the magic of the world-famous Hogwarts Express train from the Harry Potter films. With real steam, working lights, and authentic sound effects, playtime becomes a fully immersive Wizarding World adventure—safe, fun, and endlessly engaging. The set includes everything needed for magical journeys: the Hogwarts Castle Steam Locomotive, two coaches with magnetic couplings, an easy clip figure-of-8 track with a siding, Kings Cross Platform 9 ¾ Station, Hogsmeade Station buildings, and a hand controller for easy, intuitive operation.  Every detail is designed for hands-on fun and imaginative storytelling, making it the ultimate gift for young Harry Potter fans. This set has everything your children need for hours of fun and the Playtrains toy system offers a host of extra trains, track and buildings that can be added to this set to create a bigger toy train set.  All Playtrains products are compatible. Play, build, and explore with the Playtrains Harry Potter Hogwarts Express train set.

Hornby Playtrains: Metal Works Open and Tipper Wagon Pack

Playtrains: Metal Works Open and Tipper Wagon Pack Add even more hands-on adventure to their Playtrains railway world with this exciting Freight Wagon Pack.  Perfect for children aged 5–8, this pack includes one closed goods wagon and one open tipper wagon — ready to carry everything anything from “important deliveries” to imaginative cargo dreamed up on the living room floor.  Finished in fun yet realistic colour schemes, these wagons bring an authentic freight feel while still capturing a child’s sense of play. They’re the ideal addition to the Steam Goods Train Set (R9361), Blue Ranger Steam Engine (R9378SS) or Steam Tank Engine Express (R9364).  Whether it’s transporting supplies to a town, tipping out loads at a pretend quarry, or making special deliveries, the storytelling possibilities grow with every trip around the track. Simple magnetic couplings make attaching and detaching the wagons quick and frustration-free for little hands, helping children build confidence as they create their own railway world.  More wagons mean more adventures — and even more reasons to keep their railway moving.

Hornby Playtrains: Signal Box

Playtrains: Signal Box Add another layer of imagination to their railway adventures with this signal box, created especially for Hornby Playtrains. An ideal structure for bringing your child’s train set to life, this classic signal box gives every journey a sense of purpose and storytelling.  Children aged 5–8 will love imagining the railway controller inside, deciding when trains can depart, when they must stop, changing the points and keeping everything running smoothly. Made from robust plastic and supplied in a simple kit form, it’s easy to assemble and designed to stand up to enthusiastic everyday play.  The realistic colours add an authentic touch to their Playtrains railway play set-up, helping to create a miniature railway world that feels both fun and believable. Fully compatible with all Hornby Playtrains toys, it’s a simple way to expand their set, encourage creative role play and keep their railway adventures on track.  

Hornby Playtrains: Station and Platform

Playtrains: Station and Platform Complete their railway world with this charming station building set, specially designed for Hornby Playtrains. The perfect way to bring a child’s train set to life, this station adds purpose and storytelling to every journey. With a detailed station building and four platform sections, children can create their very own bustling stop where passengers hop on and off before the next adventure begins.  Made from robust plastic and supplied in a simple kit form, it’s easy to assemble and built to handle enthusiastic play from children aged 5–8. The realistic colours give the layout an authentic feel, while the sturdy construction provides the reassurance parents look for.  Whether they’re announcing arrivals, planning departures or imagining busy travel days, this station set encourages creative role play and longer, more engaging play sessions. Fully compatible with all Hornby Playtrains toys, it’s a wonderful way to expand their railway and make every trip feel like a real journey.

Hornby Playtrains: Crimson & Cream Steam Train Coach Pack

Playtrains: Crimson & Cream Steam Train Coach Pack Expand your child's railway adventures with this delightful Playtrains Steam Train Coach Pack.  Featuring two beautifully finished passenger coaches in a classic red and cream colour scheme, these coaches are the perfect way to make your child’s train feel like a real express.  Designed for children aged 5–8, the coaches are robust, easy to handle and built for enthusiastic play. An ideal addition to the Blue Ranger Steam Engine (R9378SS) or the Steam Tank Engine Express (R9364), these extra carriages instantly create longer trains and bigger journeys — encouraging imaginative storytelling and extended play.  Simple magnetic couplings make attaching and detaching the coaches quick and frustration-free for little hands, helping children build confidence as they create their own railway world. Add more passengers, more adventures and even more excitement to every journey.

Hornby Playtrains: Harry Potter Hogwarts Express Coach Pack

Playtrains: Harry Potter Hogwarts Express Coach Pack Add even more magic to their railway adventure with the Hogwarts Express Pack of 2 Coaches. Designed as the perfect addition to the Harry Potter Back to Hogwarts Train Set, these extra carriages let young witches and wizards expand their train and bring even more of the wizarding world to life.  Easy to attach with simple magnetic couplings, the coaches click neatly into place, making them ideal for children aged 5–8 to connect and play independently. Whether they’re setting off from Platform 9¾ or imagining the journey to Hogwarts, a longer train means even bigger stories and more creative play.  Built to last and officially licensed, these Hogwarts Express coaches are a wonderful way to grow their set, encourage imaginative storytelling, and make every trip to Hogwarts feel that little bit more magical.

Hornby Playtrains: Harry Potter Hogwarts Express Train (w/ Steam)

Playtrains: Harry Potter Hogwarts Express Train (w/ Steam) Bring the magic to life with the Hogwarts Castle steam engine – the locomotive that pulls the Hogwarts Express on its unforgettable journey to Hogwarts School.  Inspired by the beloved world of Harry Potter, this feature-packed toy steam engine adds excitement, realism and plenty of “wow” moments to your child’s railway adventures. Safe, water-based vapour gently puffs from the chimney to create a realistic steam effect, giving young witches and wizards the thrill of a real steam train without any of the worry.  With authentic train sounds and a working front light, the engine makes every departure feel just like it does in the films. Designed for children aged 5–8, it’s robust, engaging and compatible with other Hornby Playtrains toys. The locomotive is battery powered (4 x AA batteries required). It operates using an IR hand controller (sold separately R7407), making it easy for children to take control of their very own magical journey.  A wonderful way to enhance their Hogwarts Express experience, this steam engine brings storytelling, independence and spellbinding fun together in one truly magical addition.

Hornby Playtrains: "Blue Ranger" Steam Train (w/ Steam)

Playtrains: "Blue Ranger" Steam Train (w/ Steam) Meet Blue Ranger – the blue steam engine ready to take your child on their next big Playtrains adventure! Playtrains is designed especially for children aged 5–8, Blue Ranger captures all the excitement of a real passenger express train in a fun, child-friendly way. Finished in a striking blue livery and named Blue Ranger, this eye-catching locomotive is built to inspire imaginative journeys around your home.  What makes it truly magical is the realistic steam effect. Simply add water and watch safe, vapourised mist gently puff from the chimney – giving all the drama of a real steam train, with complete peace of mind for parents.  Add in authentic train sounds and a working front headlight, and every journey feels even more lifelike. Blue Ranger is battery powered (4 x AA batteries required). It’s operated using an easy-to-use IR hand controller (sold separately R7407), perfectly suited to small hands and growing confidence.  As your child’s railway world expands, Blue Ranger is fully compatible with the Playtrains Steam Train Coach Pack R9373 and other Playtrains toys, making it simple to add more coaches and create a longer, grander express. Big adventures start with one engine — and Blue Ranger is ready to lead the way.  

2026 Hornby TT120 Catalogue

2026 Hornby TT120 Catalogue The Hornby TT:120 Catalogue presents the full annual range of Hornby products in vibrant full colour, complete with detailed specifications and premium photography. This comprehensive edition highlights new releases, key technical details, and the latest additions to the collection. A must-have reference for enthusiasts and catalogue collectors alike!

Hornby Country Cottage (TT)

Country Cottage  The TT:120 scale range of scenic items gains its first residential building in this year's April announcements, in the form of the charming Country Cottage.  Typical of a dwelling nestled along a country lane, this half render/half brick cottage is highly detailed, comes pre-painted, and is fitted with separate glazed windows and gutter piping. It would be well suited for a number of TT layout styles, regardless of time period or location. - TT:120 Scale

Hornby YGB Seacow Civil Engineers "Dutch" 980100 (TT)

YGB Seacow Civil Engineers "Dutch" 980100 Civil Engineers YGB Seacow Wagon 980100 is a newly tooled model with a 'Dutch' Grey and Yellow livery. Featuring intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell, it carries number DB980100.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: ‘Dutch’ Grey and Yellow Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGH Sealion Civil Engineers "Dutch" 982838 (TT)

YGH Sealion Civil Engineers "Dutch" 982838 This model is an accurate depiction of Civil Engineers 982838 YGH Sealion Wagon, in its 'Dutch' Grey and Yellow livery. It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius Livery: ‘Dutch’ Grey and Yellow Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGH Sealion Departmental Olive 982786, 982788, & 982791 (TT)

YGH Sealion Departmental Olive Green 982786, 982788, & 982791 Triple Pack The newly tooled Civil Engineers YGH Sealion Wagon Triple Pack depicts numbers DB982786, DB982788, and DB982791 in Departmental Olive Green.  They feature intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision-moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: Departmental Olive Green Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGH Sealion Departmental Olive Green 982792 (TT)

YGH Sealion Departmental Olive Green 982792 In the elegant Departmental Olive Green livery, this Civil Engineers YGH Sealion Wagon is a newly tooled delight. It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: Departmental Olive Green Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby TTA Tanker Amoco BRT 57484, 57485 & 57486 Triple Pack (TT)

TTA Tanker Amoco BRT 57484, 57485 & 57486 Triple Pack  Our highly detailed, popular TT:120 TTA Tanker returns with a new livery. This fantastic model is based on the CAD from the acclaimed OO version, which features intricate catwalk, ladder and underframe detailing. Decorated using accurate colours and numerous printed labels and warning stickers, this new range of TTA Tankers will look amazing mixed in with the previous colourful TTA releases and sat behind locos such as the Class 37 and 66. This triple pack of TTA Tankers depicts No.57484, 57485 and 57486 in Procor/Amoco Grey livery, which ran during the 1980s when Procor UK Ltd took over the BRT operations and began branding their wagons with the new name. Model Specification: Expertly detailed models of the TTA Tank Wagon based on highly acclaimed OO Gauge version Wealth of separate parts, like the etched metal roof catwalk and ladder, as well as underframe brake equipment Metal buffers. Tooling: 35T chassis Single end ladder 3 hole disc wheels. Livery: Procor/Amoco Grey livery Still features previous owner ‘BRT’ decals Various brightly coloured warning labels Semi-gloss finish - TT:120 Scale

Hornby TTA Tanker Amoco BRT 57502 (TT)

TTA Tanker Amoco BRT 57502  Our popular, highly detailed TT:120 TTA Tanker returns with a new livery. This fantastic model is based on the CAD from the acclaimed OO version, which features intricate catwalk, ladder and underframe detailing.  Decorated using accurate colours and numerous printed labels and warning stickers, this new range of TTA Tankers will look amazing mixed in with the previous colourful TTA releases and sat behind locos such as the Class 37 and 66. This single TTA Tanker depicts No.57502 in Procor/Amoco Grey livery, which ran during the 1980s when Procor UK Ltd took over the BRT operations and began branding their wagons with the new name. Model Specification: Expertly detailed model of TTA Tank Wagon based on highly acclaimed OO Gauge version Wealth of separate parts, like the etched metal roof catwalk and ladder, as well as underframe brake equipment Metal buffers. Tooling: 35T chassis Single end ladder 3 hole disc wheels. Livery: Procor/Amoco Grey livery Still features previous owner ‘BRT’ decals Various brightly coloured warning labels Semi-gloss finish - TT:120 Scale

Hornby YGA Seacow EWS 980076 (TT)

YGA Seacow EWS 980076  This newly tool EWS YGA Seacow Wagon 980076 displays a striking maroon livery. It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius. Livery: EWS Maroon Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby YGB Seacow Civil Engineers "Dutch" 980062, 980049, & 980074 (TT)

YGB Seacow Civil Engineers "Dutch" 980062, 980049, & 980074 Triple Pack  This newly tooled Civil Engineers YGB Seacow Wagon Triple Pack includes numbers DB980062, DB980049, and DB980074 in a stylish Grey and Yellow livery.  It features intricate detailing such as guard rails, handwheels, catwalks, brake equipment and buffers, as well as a precision-moulded bodyshell.  A mainstay of engineering trains for many years, these ballast wagons would transport and deposit fresh ballast on top of newly laid track via the chute located between the bogies, and could be seen operating with a huge variety of locomotive traction over their lifetime – from BR Blue diesels in the 70’s, to Civil Engineers ‘Dutch’ 31, 37 & 47s in the 90’s, and finally Class 66s in the privatised era.  These ‘fishy’ wagons are sure to be a staple of your TT:120 wagon pool for many years to come! Model Specification: Brand new tooling depicting Seacow and Sealion family of bogie hopper wagons Accurate body panel detailing Vast number of separate parts Die-cast chute detail for improved running capabilities Differences in body types and bogies between Seacow/Sealion catered for Kinematic NEM coupling system Minimum second radius Livery: Civil Engineers ‘Dutch’ Grey & Yellow Various printed warning labels and information panels Accurate paint colours and typefaces Semi-gloss finish - TT:120 Scale

Hornby PO 7 Plank Wagon A & H Betts Stewards Lane SE&CRY 45 (TT)

PO 7 Plank Wagon A & H Betts Stewards Lane SE&CRY 45 Few railway designs are as recognisable or numerous as the private owner 3, 5 and 7 plank open wagons from the early 1900s.  Built in the tens, if not hundreds, of thousands, these simple four axle merchandise wagons would’ve carried all manner of goods, from loose material like sand and coal, to finished products like bricks or cement bags. Finished in colourful schemes devised by the wagon owner, these plank wagons could be seen all over Great Britain during the ‘Big Four’ and early nationalisation in the 1950s.  Our TT:120 scale model covers the 7-plank design, which often featured the most vibrant and interesting brandings. This model is an example of a 7-plank wagon owned by A&H Betts, who operated as coal traders for many years in the 1900’s in south London, hence the Stewarts Lane branding. Running No. 45. Model Specifications: Detailed planked bodyshell Detailed interior Clasp-style brake rigging Separately fitted buffers Kinematic NEM couplings Livery: ‘A&H Betts’ grey Brown interior Satin finish - TT:120 Scale

Hornby PO 7 Plank Wagon Arthur Wharton Ltd Leeds 3018 (TT)

PO 7 Plank Wagon Arthur Wharton Ltd Leeds 3018  Few railway designs are as recognisable or numerous as the private owner 3, 5 and 7 plank open wagons from the early 1900s. Built in the tens, if not hundreds, of thousands, these simple four axle merchandise wagons would’ve carried all manner of goods, from loose material like sand and coal, to finished products like bricks or cement bags.  Finished in colourful schemes devised by the wagon owner, these plank wagons could be seen all over Great Britain during the ‘Big Four’ and early nationalisation in the 1950s.  Our TT:120 scale model covers the 7-plank design, which often featured the most vibrant and interesting brandings. This model is an example of a 7-plank wagon in the ownership of Arthur Wharton Ltd, a coal and coke merchant operating in the Yorkshire area during the 1920s and 30s. It features running No.3018. Model Specifications: Detailed planked bodyshell Detailed interior Clasp-style brake rigging Separately fitted buffers Kinematic NEM couplings. Livery: ‘Arthur Wharton Ltd’ Grey Brown interior Satin finish - TT:120 Scale

Hornby PO 7 Plank Wagon Mortimore Chippenham No.56 (TT)

PO 7 Plank Wagon Mortimore Chippenham No.56  Few railway designs are as recognisable or numerous as the private owner 3, 5 and 7 plank open wagons from the early 1900s.  Built in the tens, if not hundreds, of thousands, these simple four-axle merchandise wagons would’ve carried all manner of goods, from loose material like sand and coal, to finished products like bricks or cement bags. Finished in colourful schemes devised by the wagon owner, these plank wagons could be seen all over Great Britain during the ‘Big Four’ and early nationalisation in the 1950s.  Our TT:120 scale model covers the 7-plank design, which often featured the most vibrant and interesting brandings. This model is an example of a 7-plank wagon owned by Frederick Cotton Mortimore who was a coal trader in the Somerset and Forest of Dean area. Model Specifications: Detailed planked bodyshell Detailed interior Clasp-style brake rigging Separately fitted buffers Kinematic NEM couplings. Livery: ‘Mortimore’ red Brown interior Satin finish - TT:120 Scale

Hornby HAA Hopper Trainload Coal Sector 350412 (TT)

HAA Hopper Trainload Coal Sector 350412 The HAA ‘Merry Go Round’ coal hopper wagon rejoins the TT:120 range as part of the April launch announcement, in the popular Trainload Freight Coal Sector yellow livery of the 1980s and 90s.  This highly detailed and colourful hopper wagon has been expertly researched and captures the angular look of the HAA well. With a wealth of separately fitted parts, crisp paint application, die-cast weight and kinematic NEM couplings, this modern image wagon will not only look good on your layout, it will run smoothly too! TT6093 depicts No.350412 HAA coal hopper wagon in TLF Coal Sector livery. Model Specification: Extensively researched model of HAA coal hopper wagon Highly detailed Separate parts including hand brake, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius Livery: TLF Coal Sector yellow and silver ‘Barry’ pool markings Accurate colours and fonts Semi-gloss finish - TT:120 Scale

Hornby HAA Hopper Trainload Coal Sector 350428, 350472, & 350468 (TT)

HAA Hopper Trainload Coal Sector 350428, 350472, & 350468 Triple Pack  The HAA ‘Merry Go Round’ coal hopper wagon rejoins the TT:120 range as part of the April launch announcement, in the popular Trainload Freight Coal Sector yellow livery of the 1980s and 90s.  This highly detailed and colourful hopper wagon has been expertly researched and captures the angular look of the HAA well. With a wealth of separately fitted parts, crisp paint application, die-cast weight and kinematic NEM couplings, this modern image wagon will not only look good on your layout, it will run smoothly too! TT6094 is a triple pack and depicts No.350428, 350472, and 350468 HAA coal hopper wagons in TLF Coal Sector livery. Model Specification: Extensively researched models of HAA coal hopper wagon Highly detailed Separate parts including hand brake, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius Livery: TLF Coal Sector yellow and silver ‘Barry’ pool markings Accurate colours and fonts Semi-gloss finish - TT:120 Scale

Hornby HBA Wagon BR Bauxite 360626 (TT)

HBA Wagon BR Bauxite 360626 The BR HBA Wagon 360626 is a 4-axle coal hopper wagon, in BR Bauxite. This British Rail standard design was built to transport domestic coal to urban areas – differing to the classic ‘Merry-Go-Round’ hoppers which took coal directly to power stations. This new wagon is based on extensive research and underwent a painstaking design process, culminating in a product that is highly accurate, features numerous separately fitted parts including brake piping, and includes a die-cast weight for smooth running.  Often seen running in long block rakes or mixed into ‘Speedlink’ railfreight services, the new HBA/HEA family is sure fit in perfectly on any 1970s or later-themed layout. Model Specification:  Extensively researched model of HBA coal hopper wagon Highly detailed Separate parts including brake piping, ladders, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius Tooling: Original suspension Offset ladders Livery: BR Bauxite HBA TOPS code Authentic colours and fonts Semi-gloss finish - TT:120 Scale

Hornby HEA Wagon BR Railfreight 360531,360575,&361303 Triple Pack (TT)

HEA Wagon BR Railfreight 360531, 360575, & 361303 Triple Pack The Railfreight HEA Wagon Triple Pack of models depicts 4-axle coal hopper wagons in BR Railfreight livery numbered 360531, 360575, and 361303. This British Rail standard design was built to transport domestic coal to urban areas – differing to the classic ‘Merry-Go-Round’ hoppers which took coal directly to power stations. These new wagon models are based on extensive research and underwent a painstaking design process, culminating in products that are highly accurate, features numerous separately fitted parts including brake piping, and includes a die-cast weight for smooth running.  Often seen running in long block rakes or mixed into ‘Speedlink’ railfreight services, the new HBA/HEA family is sure fit in perfectly on any 1970s or later themed layout. Model Specification: Extensively researched triple pack of HEA coal hopper wagons Highly detailed Separate parts including brake piping, ladders, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Tooling: Bruninghaus suspension Offset ladders. Livery: BR Railfreight flame red and grey HEA TOPS code Authentic colours and fonts Semi-gloss finish - TT:120 Scale

Hornby HEA Wagon BR Railfreight 360587 (TT)

HEA Wagon BR Railfreight 360587 The Railfreight HEA Wagon 360587 model is an ecample of a HEA 4-axle coal hopper wagon in BR Refreight livery. This British Rail standard design was built to transport domestic coal to urban areas – differing to the classic ‘Merry-Go-Round’ hoppers which took coal directly to power stations. This new wagon is based on extensive research and underwent a painstaking design process, culminating in a product that is highly accurate, features numerous separately fitted parts including brake piping, and includes a die-cast weight for smooth running. Often seen running in long block rakes or mixed into ‘Speedlink’ railfreight services, the new HBA/HEA family is sure fit in perfectly on any 1970s or later themed layout. Model Specification: Extensively researched model of a HEA coal hopper wagon Highly detailed Separate parts including brake piping, ladders, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Tooling: Bruninghaus suspension Offset ladders. Livery: BR Railfreight flame red and grey HEA TOPS code Authentic colours and fonts Semi-gloss finish - TT:120 Scale

Hornby KFA Touax Blue 93374 w/ SCI 20ft, GE 20ft, Bulkhaul 20ft (TT)

KFA Touax Blue 93374 w/ SCI 20ft, GE 20ft, Bulkhaul 20ft  This fantastic model depicts KFA No. 93374 in Touax Blue livery, with SCI 20ft container, GE 20ft tanktainer, and Bulkhaul 20ft tanktainer. It features a die-cast chassis, separately fitted brake detailing and pivoting NEM couplings. Decorated using accurate colours and numerous printed labels, this new selection of KFA Container wagons will look great mixed in with the previous KFA releases and hauled by locos such as the Class 08 and 66.Model Specification:- Expertly detailed model of KFA Container wagon based on highly acclaimed OO Gauge version- Wealth of separate parts, like the brake equipment, handbrake wheel and buffers- 20ft container, 40ft container and 20ft tanktainer all available optionsLivery:- Touax Blue- Various separately printed warning labels- Semi-gloss finish- Era 11History:The KFA intermodal wagons were produced using bogies and components reclaimed from redundant wagons, such as the ‘TEA’ tankers, and were built in Finland in the late 1980s for Tiphook Rail. This example has three 20ft containers, a TIP Tanktainer, a SCI Container and a Bulk Haul Tanktainer. - TT:120 Scale

Hornby KFA Touax Blue 93458 w/ Bell 20ft & Genstar 40ft (TT)

KFA Touax Blue 93458 w/ Bell 20ft & Genstar 40ft  This vibrant model depicts KFA No. 93458 in Touax Blue livery, with Bell 20ft container, and Genstar 40ft container. It features a die-cast chassis, separately fitted brake detailing and pivoting NEM couplings.  Decorated using accurate colours and numerous printed labels, this new selection of KFA Container wagons will look great mixed in with the previous KFA releases and hauled by locos such as the Class 08 and 66. Model Specification: Expertly detailed model of KFA Container wagon based on highly acclaimed OO Gauge version Wealth of separate parts, like the brake equipment, handbrake wheel and buffers 20ft container, 40ft container and 20ft tanktainer all available options. Livery: Touax Blue Various separately printed warning labels Semi-gloss finish - TT:120 Scale

Hornby MEA Wagon EWS 391340, 391434 & 391569 Triple Pack (TT)

MEA Wagon EWS 391340, 391434 & 391569 Triple Pack  The EWS MEA Wagon Triple Pack of models depict 4-acle open mineral wagons numbered 391340, 391434 and 391569, in EWS Maroon.  The MEA was a conversion of the HEA hopper wagon, by removing the hopper bodyshell and replacing it with an open box design with a flat base. Just like the HEA, the MEA was used to convey coal to domestic sites, as well as other bulk material like scrap or ballast. These new wagon are based on extensive research and underwent a painstaking design process, culminating in products that are highly accurate, feature numerous separately fitted parts including brake details, and include a die-cast weight for smooth running.  Often seen running in long block rakes or mixed into ‘Speedlink’ railfreight services, the MEA is perfect for late sectorisation and post-privatisation era layouts, running behind classic locos like the 37 and 66. Model Specification: Extensively researched triple pack of MEA open wagons Highly detailed Separate parts including brake equipment, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Livery: EWS Maroon Yellow lettering 2000s style yellow OHLE stickers Authentic colours and fonts Semi-gloss finish - TT:120 Scale

Hornby MEA Wagon EWS 391456 (TT)

MEA Wagon EWS 391456  The EWS MEA Wagon 391456 model depicts a 4-axle open mineral wagon and features a bold EWS Maroon livery.  The MEA was a conversion of the HEA hopper wagon, by removing the hopper bodyshell and replacing it with an open box design with a flat base. Just like the HEA, the MEA was used to convey coal to domestic sites, as well as other bulk material like scrap or ballast. This new wagon is based on extensive research and underwent a painstaking design process, culminating in a product that is highly accurate, features numerous separately fitted parts including brake details, and includes a die-cast weight for smooth running.  Often seen running in long block rakes or mixed into ‘Speedlink’ railfreight services, the MEA is perfect for late sectorisation and post-privatisation era layouts, running behind classic locos like the 37 and 66. Model Specification: Extensively researched model of MEA open wagon Highly detailed Separate parts including brake equipment, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Livery: EWS Maroon Yellow lettering 1990s style red OHLE stickers Authentic colours and fonts Semi-gloss finish - TT:120 Scale

Hornby MEA Wagon Trainload Coal Sector 391020 (TT)

MEA Wagon Trainload Coal Sector 391020  The Coal Sector MEA Wagon 391020 model depicts a 4-axle open mineral wagon in TLF Coal Sector Grey and Yellow.  The MEA was a conversion of the HEA hopper wagon, by removing the hopper bodyshell and replacing it with an open box design with a flat base. Just like the HEA, the MEA was used to convey coal to domestic sites, as well as other bulk material like scrap or ballast. This new wagon model is based on extensive research and underwent a painstaking design process, culminating in a product that is highly accurate, features numerous separately fitted parts including brake details, and includes a die-cast weight for smooth running.  Often seen running in long block rakes or mixed into ‘Speedlink’ railfreight services, the MEA is perfect for late sectorisation and post-privatisation era layouts, running behind classic locos like the 37 and 66. Model Specification: Extensively researched model of MEA open wagon Highly detailed Separate parts including brake equipment, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Livery: TLF Coal Sector 1990s style red OHLE stickers Authentic colours and fonts Semi-gloss finish - TT:120 Scale

Hornby CDA Hopper EWS 375071 (TT)

CDA Hopper EWS 375071 The CDA China clay hopper wagon model rejoins the TT:120 range in the long lasting EWS silver and maroon livery of the 2000s.  This highly detailed and colourful hopper wagon has been expertly researched and captures the unique look of the CDA well. With a wealth of separately fitted parts, crisp paint application, die-cast weight and kinematic NEM couplings, this modern image wagon will not only look good on your layout, it will run smoothly too! This model depicts No.375071 CDA Hopper Wagon in EWS maroon and silver livery. Model Specification: Extensively researched model of CDA China clay hopper wagon Highly detailed Separate parts including hand brake, canvas roof, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Livery: EWS maroon and silver St Blazey depot plaques Accurate colours and fonts Semi-gloss finish - TT:120 Scale

Hornby CDA Hopper EWS 375072, 375073, & 375074 Triple Pack (TT)

CDA Hopper EWS 375072, 375073, & 375074 Triple Pack The CDA China clay hopper wagon rejoins the TT:120 range in the long lasting EWS silver and maroon livery of the 2000s.  This highly detailed and colourful hopper wagon triple pack has been expertly researched and captures the unique look of the CDA well. With a wealth of separately fitted parts, crisp paint application, die-cast weight and kinematic NEM couplings, these modern image wagons will not only look good on your layout, they will run smoothly too! This triple pack includes No.375072, No.375073, and No.375074 CDA hopper wagon models in EWS maroon and silver livery. Model Specification: Extensively researched model of CDA China clay hopper wagon Highly detailed Separate parts including hand brake, canvas roof, underframe equipment, and buffers Die-cast weight Kinematic NEM coupling Minimum second radius. Livery: EWS maroon and silver St Blazey depot plaques Accurate colours and fonts Semi-gloss finish - TT:120 Scale

Hornby 10T Vent Van LMS Grey 581932 (TT)

10T Vent Van LMS Grey 581932 The covered ventilated van was an extremely common sight across the country during the time of the ‘Big Four’, with each company inheriting a plethora of vans from the pre-grouping operators, as well as creating their own. Thousands were built to various designs with the intention that they would carry all manner of goods – from canned food and bananas to cement and fertiliser. The model depicted here is an LMS grey example with running number 581932. Model Specification: Crisp plank detailing Detailed underframe Separately fitted brake equipment Kinematic NEM couplings Recommended for use on 2nd radius curves or higher, but capable of traversing 1st radius. Livery: LMS Grey Accurate colours and typefaces used Satin finish - TT:120 Scale

Hornby 12T Tank Power Petroleum Silver 115 (TT)

12T Tank Power Petroleum Silver 115 This Power Petroleum 12T Tank Wagon 115 model is presented in the silver ‘Power’ livery from the early 20th century.  Bulk liquid in various forms such as petroleum, oil, and chemicals transported via wagons have been a perennial feature of British Railways, with a multitude of privately owned companies owning fleets of tanker wagons brandished in their own paint schemes.  Power Petroleum Company, formed in 1923 for the distribution of imported Russian oil, was no different, painting their wagons silver with green lettering. Model Specification: Detailed model of 12T Tank wagon Rivetted tank design Separately fitted parts such as retaining wires and underframe equipment Tiebar between axle boxes Kinematic NEM couplings Minimum 2nd radius, but capable of traversing 1st radius. Livery: Power Petroleum Silver Accurate livery colours and typefaces - TT:120 Scale

Hornby 12T Tank Power Petroleum Silver 118, 119 & 120 Triple Pack (TT)

12T Tank Power Petroleum Silver 118, 119 & 120 Triple Pack  Get three lots of silver power in this Power Petroleum 12T Tank Wagon Triple Pack, with models numbered 118, 119 and 120. They represent wagons from the early 20th century.  Bulk liquid in various forms such as petroleum, oil, and chemicals transported via wagons have been a perennial feature of British Railways, with a multitude of privately owned companies owning fleets of tanker wagons brandished in their own paint schemes.  Power Petroleum Company, formed in 1923 for the distribution of imported Russian oil, was no different, painting their wagons silver with green lettering. Model Specification: Detailed models of 12T Tank wagon Rivetted tank design Separately fitted parts such as retaining wires and underframe equipment Tiebar between axle boxes Kinematic NEM couplings Minimum 2nd radius, but capable of traversing 1st radius. Livery: Power Petroleum silver Accurate livery colours and typefaces - TT:120 Scale

Hornby 12T Vent Van Banana Van Bauxite ‘Fyffes’ B880681 (TT)

12T Vent Van Banana Van Bauxite ‘Fyffes’ B880681 The Hornby TT:120 model is a faithful rendition of a useful little covered van, with intricate planking detail, separately fitted brake equipment, and a crisp paint application. The covered ventilated van was an extremely common sight across the country during the time of the ‘Big Four’ and early British Railways, with each of the four and BR themselves building thousands to various designs with the intention that they would carry all manner of goods – from canned food and bananas to cement and fertiliser.  TT6068 is an example of a Ventilated Van in Bauxite Brown livery, adorned with ‘Fyffes’ labels and ‘Banana’ marking, numbered B880681. Model Specification: Crisp plank detailing Detailed underframe Separately fitted brake equipment Kinematic NEM couplings Recommended for use on 2nd radius curves or higher, but capable of traversing 1st radius Livery: BR Bauxite with ‘Banana’ coding ‘Fyffes’ label Accurate colours and typefaces used Satin finish - TT:120 Scale

Hornby LNER A1 4472 'Flying Scotsman' LNER Apple Green (TT)

TT3004M LNER Class A1 4-6-2 4472 'Flying Scotsman' The A1 is a locomotive that will always be tied to the names Sir Nigel Gresley and LNER, however only one of these was involved in the design and construction from the beginning. The A1 was originally a Great Northern Railway design, with number 1470 ‘Great Northern’ being one of only two examples to outshop into GNR service. These locomotives were powerful, and almost immediately served their purpose of comfortably outperforming the older ‘Atlantic’ locomotives that were being pushed to their limit between London and the North. These ‘Pacific’ locomotives did just that, and they would go on to become one of the most versatile locomotives in Britain. Upon amalgamation onto the LNER, some minor changes were made to the Class, but being a recent design at the time they were already close to the pinnacle of what could be achieved by any locomotive designer, let alone Sir Nigel Gresley. 4472 is a number that is engrained into the brain of every man who was once a little boy staring starry eyed and an Apple Green streak thundering though the countryside. ‘Flying Scotsman’ was built in 1923 as one of the A1 locomotives built under the LNER, it is the only member of the class to go on to be preserved. The trials and tribulations faced by Flying Scotsman in preservation have cemented its status as one of the most famous steam locomotives ever built. - TT:120 Scale

Hornby Pullman Brake Parlour Third 'Car No.209' (TT)

Pullman Brake Parlour Third 'Car No.209'  Capture the elegance of luxury train travel with the K-Type Pullman Cars in TT:120, with crisp moulded bodyshells, detailed interiors and working table lamps.  This new offering of 3rd Class Brake numbered 209 is perfect for pairing with previous runs of Pullman coaches, and could easily run behind a 1940s steam locomotive, or a modern Class 50 or 66 on a charter train! Model Specification: Highly detailed model of 3rd Class Brake Defined bogie mouldings with rivet detailing Detailed underframe Moulded interior Kinematic NEM coupling mechanism Accessory Pack Electronics: Working table lamps on analogue or DCC. Livery: Lined Pullman cream and brown Grey roof Printed ‘Car No.209 Third Class’ running number Semi-gloss finish - TT:120 Scale

Hornby Pullman Kitchen Parlour First 'Fingall' (TT)

Kitchen Parlour First 'Fingall' Capture the elegance of luxury train travel with the K-Type Pullman Cars in TT:120, with crisp moulded bodyshells, detailed interiors and working table lamps. This new offering of 1st Class Kitchen named ‘Fingall’ is perfect for pairing with previous runs of Pullman coaches, and could easily run behind a 1940s steam locomotive, or a modern Class 50 or 66 on a charter train. Model Specification: Highly detailed model of 1st Class Kitchen Car Defined bogie mouldings with rivet detailing Detailed underframe Moulded interior Kinematic NEM coupling mechanism Accessory Pack Electronics: Working table lamps on analogue or DCC. Livery: Lined Pullman cream and brown Grey roof ‘Fingall’ painted names Semi-gloss finish - TT:120 Scale

Hornby BR Mk3 TF 41131 (H) FGW Gold Stripe (TT)

BR Mk3 TF 41131 FGW Gold Stripe  This meticulously researched and detailed FGW MK3 model depicts a Trailer First No. 41131 in the iconic First Great Western Green, Gold and White scheme from the early 2000s. The Class 43 HST Power Cars and Mk3 trailing coaches have been a mainstay of the Hornby OO and TT:120 ranges for many years and this updated collection allows you to build a fully prototypical eight-car train, which is sure to make a statement on your TT:120 layout! Each Mk3 vehicle has been expertly adorned with accurate colours and typefaces, with coach lettering. Model Specification: Highly detailed model of Mk3 Trailer First Defined bogie mouldings Detailed underframe and roof Moulded interior Kinematic NEM coupling mechanism Accessory Pack Livery: First Great Western Green, Gold and White, commonly referred to as ‘Fag Packet’ livery ‘H’ coach number decals Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Mk3 TF 41132 (G) FGW Gold Stripe (TT)

BR Mk3 TF 41132 FGW Gold Stripe The ever-popular Mk3 are back, and this model coach depicts Trailer First No. 41132 in FGW Green, Gold and White scheme from the early 2000s.  The Class 43 HST Power Cars and Mk3 trailing coaches have been a mainstay of the Hornby OO and TT:120 ranges for many years and this updated collection allows you to build a fully prototypical eight-car train, which is sure to make a statement on your TT:120 layout! Each Mk3 vehicle has been expertly adorned with accurate colours and typefaces, with coach lettering. Model Specification: Highly detailed model of Mk3 Trailer First Defined bogie mouldings Detailed underframe and roof Moulded interior Kinematic NEM coupling mechanism Accessory pack. Livery: First Great Western Green, Gold and White, commonly referred to as ‘Fag Packet’ livery ‘G’ coach number decals Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Mk3 TGS 44033 (A) FGW Gold Stripe (TT)

BR Mk3 TGS 44033 (A) FGW Gold Stripe Complete your Class 43 HST rake with this Mk3 Trailer Guard Standard No. 44033 in the First Great Western Green, Gold and White scheme from the early 2000s.  The Class 43 HST Power Cars and Mk3 trailing coaches have been a mainstay of the Hornby OO and TT:120 ranges for many years and this collection allows you to build a fully prototypical eight-car train, which is sure to make a statement on your TT:120 layout! Each Mk3 vehicle has been meticulously researched and features correct tooling depending on the type, expertly adorned with accurate colours and typefaces, and coach lettering. Model Specification: Highly detailed model of Mk3 Trailer Guard Standard Defined bogie mouldings Detailed underframe and roof Moulded interior Kinematic NEM coupling mechanism Accessory pack. Livery: First Great Western Green, Gold and White, commonly referred to as ‘Fag Packet’ livery 'A’ coach number decals Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Mk3 TRFB 40736 (F) FGW Gold Stripe (TT)

BR Mk3 TRFB 40736 (F) FGW Gold Stripe Add FGW Mk3 TRFB Coach 40736 to your Class 43 rake, along with our other matching coaches to create a fully prototypical eight-car train.  Depicting a Trailer Restaurant First Buffet car in the First Great Western Green, Gold and White scheme from the early 2000s, these coaches are sure to make a statement on your TT:120 layout! Each Mk3 vehicle has been meticulously researched and features correct tooling depending on the type and has been expertly adorned with accurate colours and typefaces, with coach lettering. Model Specification: Highly detailed model of Mk3 Trailer Restaurant First Buffet Defined bogie mouldings Detailed underframe and roof Moulded interior Kinematic NEM coupling mechanism Accessory pack. Livery: First Great Western Green, Gold and White, commonly referred to as ‘Fag Packet’ livery ‘F’ coach number decals Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Mk3 TS 42073 (D) FGW Gold Stripe (TT)

BR Mk3 TS 42073 (D) FGW Gold Stripe This highly detailed and meticulously designed Mk3 TS Coach depicts Trailer Standard No. 42073 in First Great Western Green, Gold and White scheme.  The Class 43 HST Power Cars and Mk3 trailing coaches have been a mainstay of the Hornby OO and TT:120 ranges for many years and this latest collection allows you to build a fully prototypical eight-car train, which is sure to make a statement on your TT:120 layout! Each Mk3 vehicle has been carefully researched and features correct tooling depending on the type, expertly adorned with accurate colours and typefaces, and coach lettering. Model Specification: Highly detailed model of Mk3 Trailer Standard Defined bogie mouldings Detailed underframe and roof Moulded interior Kinematic NEM coupling mechanism Accessory pack. Livery: First Great Western Green, Gold and White, commonly referred to as ‘Fag Packet’ livery ‘D’ coach number decals Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Mk3 TS 42271 (E) FGW Gold Stripe (TT)

BR Mk3 TS 42271 (E) FGW Gold Stripe Featuring the First Great Western Green, Gold, and White scheme from the early 2000s, this Mk3 coach model depicts a Trailer Standard No. 42271.  The Class 43 HST Power Cars and Mk3 trailing coaches have been a mainstay of the Hornby OO and TT:120 ranges for many years and this collection allows you to build a fully prototypical eight-car train, which is sure to make a statement on your TT:120 layout! Each Mk3 vehicle has been meticulously researched and features correct tooling depending on the type and has been expertly adorned with accurate colours and typefaces, with coach lettering. Model Specification: Highly detailed model of Mk3 Trailer Standard Defined bogie mouldings Detailed underframe and roof Moulded interior Kinematic NEM coupling mechanism Accessory pack. Livery: First Great Western Green, Gold and White, commonly referred to as ‘Fag Packet’ livery ‘E’ coach number decals Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Mk3 TS 42272 (C) FGW Gold Stripe (TT)

BR Mk3 TS 42272 (C) FGW Gold Stripe A must-have model for your Class 43 rake, this FGW Mk3 TS Coach depicts Trailer Standard No. 42272 in the First Great Western Green, Gold and White scheme from the early 2000s.  The Class 43 HST Power Cars and Mk3 trailing coaches have been a mainstay of the Hornby OO and TT:120 ranges for many years and this collection allows you to build a fully prototypical eight-car train, which is sure to make a statement on your TT:120 layout! Each Mk3 vehicle has been meticulously researched and features correct tooling depending on the type, expertly adorned with accurate colours and typefaces, and coach lettering. Model Specification: Highly detailed model of Mk3 Trailer Standard Defined bogie mouldings Detailed underframe and roof Moulded interior Kinematic NEM coupling mechanism Accessory pack. Livery: First Great Western Green, Gold and White, commonly referred to as ‘Fag Packet’ livery ‘C’ coach number decals Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Mk3 TS 42273 (B) FGW Gold Stripe (TT)

BR Mk3 TS 42273 (B) FGW Gold Stripe Another Mk3 coach for you rake - this time depicting Trailer Standard No.42273 in the First Great Western Gold, Green and White scheme.  The Class 43 HST Power Cars and Mk3 trailing coaches have been a mainstay of the Hornby OO and TT:120 ranges for many years and this latest collection allows you to build a fully prototypical eight-car train, which is sure to make a statement on your TT:120 layout! Each Mk3 vehicle has been meticulously researched and features correct tooling depending on the type and has been expertly adorned with accurate colours and typefaces, as well as featuring coach lettering. Model Specification: Highly detailed model of Mk3 Trailer Standard Defined bogie mouldings Detailed underframe and roof Moulded interior Kinematic NEM coupling mechanism Accessory pack. Livery: First Great Western Green, Gold and White, commonly referred to as ‘Fag Packet’ livery ‘B’ coach number decals Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby IOW 4 Wheel 1st Class Coach 19 (TT)

IOW 4 Wheel 1st Class Coach 19  Take a trip down South with the IOW 4 Wheel 1st Class Coach 19 model, in its Isle of Wight Central Railway lined Teak livery.  The charming and distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 1st Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory Pack. Livery: Isle of Wight Central Railway Lined Teak Gold lettering Painted blue seating Satin finish - TT:120 Scale

Hornby IOW 4 Wheel 3rd Class Brake Coach 12 (TT)

IOW 4 Wheel 3rd Class Brake Coach 12  Bring some island magic to your rake with the IOW 4 Wheel 3rd Class Brake Coach 12, featuring the Isle of Wight Central Railway lined Teak livery.  The distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic Brake 3rd Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior, including guards’ compartment Kinematic NEM coupling mechanism Accessory Pack. Livery: Isle of Wight Central Railway Lined Teak Gold lettering Painted red seating Satin finish - TT:120 Scale

Hornby IOW 4 Wheel 3rd Class Coach 10 (TT)

IOW 4 Wheel 3rd Class Coach 10  IOW 4 Wheel 3rd Class Coach 10 is a charming model to add to your island-bound model train, featuring the Isle of Wight Central Railway lined Teak livery. The distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 3rd Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory Pack. Livery: Isle of Wight Central Railway Lined Teak Gold lettering Painted red seating Satin finish - TT:120 Scale

Hornby LSWR 4 Wheel 1st Class Coach 123 (TT)

LSWR 4 Wheel 1st Class Coach 123  This charming LSWR 4 Wheel 1st Class Coach 123 looks incredible in its London and South Western Railway Lined Salmon and Brown livery.  The distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 4-wheel 1st Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory pack. Livery: LSWR Lined Salmon and Brown Gold lettering Painted blue seating Satin finish - TT:120 Scale

Hornby LSWR 4 Wheel 3rd Class Brake Coach 140 (TT)

LSWR 4 Wheel 3rd Class Brake Coach 140  LSWR 4 Wheel 3rd Class Brake Coach 140 is a charm personified in its London and South Westen Railway lined Salmon and Brown livery.  The distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 4-wheel Full Brake Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory Pack. Livery: LSWR Lined Salmon and Brown Gold lettering Satin finish - TT:120 Scale

Hornby LSWR 4 Wheel 3rd Class Brake Coach 179 (TT)

LSWR 4 Wheel 3rd Class Brake Coach 179 The LSWR 4 Wheel 3rd Class Brake Class 179 is a lovely addition to your TT:120 rake, featuring the London and South Western Railway lined Salmon and Brown livery.  The distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 4-wheel Brake 3rd Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior, including guards’ compartment Kinematic NEM coupling mechanism Accessory Pack. Livery: LSWR Lined Salmon and Brown Gold lettering Painted red seating Satin finish - TT:120 Scale

Hornby LSWR 4 Wheel 3rd Class Coach 302 (TT)

LSWR 4 Wheel 3rd Class Coach 302  Bring 4-wheel model charm to your layout with the LSWR 4 Wheel 3rd Class Coach 302 in its London and South Western Railway lined Salmon and Brown livery.  The distinctive 4-wheel coach returns with new guises, this time covering operations in the south of England during the late 1800s and early 1900s. Perfect for pairing with the delightful TT:120 A1/A1X Terriers, these diminutive coaches are based on designs typical of the early steam era and make for a fine addition to your model layout, be it a picturesque branchline, busy station scene or heritage railway! Model Specification: Highly detailed model of generic 4-wheel 3rd Class Coach Bodyshell featuring panel detail, rain strips, door hinges and lamp brackets Separately fitted roof equipment, buffers, and brake detailing Moulded interior Kinematic NEM coupling mechanism Accessory pack. Livery: LSWR Lined Salmon and Brown Gold lettering Painted red seating Satin finish - TT:120 Scale

Hornby BR Mk1 BSK E35266 BR Blue & Grey (TT)

BR Mk1 BSK E35266 BR Blue & Grey The British Railways Mark 1 coach family includes some of the most successful designs in railway history, with thousands constructed and lasting from the early 50’s right up until the present day. Perfect for accompanying the TT:120 range of diesel locomotives like the Class 31, 37 and 50, these coaches add the next level of realism to your railway! Model Specification: Highly detailed model of Mk1 Composite Corridor Defined bogie mouldings Detailed roof and underframe Moulded interior Kinematic NEM coupling mechanism Accessory pack. - TT:120 Scale

Hornby BR Mk1 BSK W34916 BR Blue & Grey (TT)

BR Mk1 BSK W34916 BR Blue & Grey The British Railways Mark 1 coach family includes some of the most successful designs in railway history, with thousands constructed and lasting from the early 50’s right up until the present day. Perfect for accompanying the TT:120 range of diesel locomotives like the Class 31, 37 and 50, these coaches add the next level of realism to your railway! Model Specification: Highly detailed model of Mk1 Composite Corridor Defined bogie mouldings Detailed roof and underframe Moulded interior Kinematic NEM coupling mechanism Accessory pack. - TT:120 Scale

Hornby BR Mk1 CK E15712 BR Blue & Grey (TT)

BR Mk1 CK E15712 BR Blue & Grey  The British Railways Mark 1 coach family includes some of the most successful designs in railway history, with thousands constructed and lasting from the early 50’s right up until the present day. Perfect for accompanying the TT:120 range of diesel locomotives like the Class 31, 37 and 50, these coaches add the next level of realism to your railway! Model Specification: Highly detailed model of Mk1 Composite Corridor Defined bogie mouldings Detailed roof and underframe Moulded interior Kinematic NEM coupling mechanism Accessory pack. - TT:120 Scale

Hornby BR Mk1 CK E15746 BR Blue & Grey (TT)

BR Mk1 CK E15746 BR Blue & Grey The British Railways Mark 1 coach family includes some of the most successful designs in railway history, with thousands constructed and lasting from the early 50’s right up until the present day. Perfect for accompanying the TT:120 range of diesel locomotives like the Class 31, 37 and 50, these coaches add the next level of realism to your railway! Model Specification: Highly detailed model of Mk1 Composite Corridor Defined bogie mouldings Detailed roof and underframe Moulded interior Kinematic NEM coupling mechanism Accessory pack. - TT:120 Scale

Hornby BR Mk1 CK M15842 BR Blue & Grey (TT)

BR Mk1 CK M15842 BR Blue & Grey The British Railways Mark 1 coach family includes some of the most successful designs in railway history, with thousands constructed and lasting from the early 50’s right up until the present day. Perfect for accompanying the TT:120 range of diesel locomotives like the Class 31, 37 and 50, these coaches add the next level of realism to your railway! Model Specification: Highly detailed model of Mk1 Composite Corridor Defined bogie mouldings Detailed roof and underframe Moulded interior Kinematic NEM coupling mechanism Accessory pack. - TT:120 Scale

Hornby BR Mk1 CK M15848 BR Blue & Grey (TT)

BR Mk1 CK M15848 BR Blue & Grey The British Railways Mark 1 coach family includes some of the most successful designs in railway history, with thousands constructed and lasting from the early 50’s right up until the present day. Perfect for accompanying the TT:120 range of diesel locomotives like the Class 31, 37 and 50, these coaches add the next level of realism to your railway! Model Specification: Highly detailed model of Mk1 Composite Corridor Defined bogie mouldings Detailed roof and underframe Moulded interior Kinematic NEM coupling mechanism Accessory pack. - TT:120 Scale

Hornby BR Class 50 D403 BR Blue (TT)

BR Class 50 D403 BR Blue  The latest 'Hoover' to the TT:120 range is the BR Class D403. Featuring a five-pole motor, directional and cab lighting, die-cast chassis and highly detailed bodyshell, the illustrious Class 50 will make an mpressive addition to your TT:120 fleet. This model depicts pre-TOPS numbered D403 in all-over BR Blue with small cab side BR Double Arrows and headcode panels. Model Specification: Highly detailed model based on extensive research including 3D scanning and original works drawings Heavy die-cast chassis and underframe, giving an overall weight of 195g Powerful five-pole skew-wound motor with dual flywheels Dual bogie drive with a total of 12 driving wheels Brass axle bearings All wheel electrical pickup Front and rear kinematic NEM coupling system Die-cast metal buffers Separately fitted metal steps, grills and handrails Accessory bag contains optional fit snow ploughs, vacuum pipes and couplings Electronics: Directional lighting Cab interior lighting (requires DCC to operate) Separately controllable taillights (requires DCC to operate) Next-18 Decoder socket compatible with HM7000 system Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Original headcode box Original boiler port Flush nose ends Livery: BR Blue with cab side double arrows Pre-Tops number Unnamed - TT:120 Scale

Hornby BR Class 50 50026 'Indomitable' BR Large Logo (TT)

BR Class 50 50026 'Indomitable' BR Large Logo Here comes another 'Hoover'! BR Class 50 50026 'Indomitable' features a five-pole motor, directional and cab lighting, die-cast chassis and highly detailed bodyshell, making an imposing addition to your TT:120 fleet. This illustrious model depicts TOPS numbered 50026 ‘Indomitable’ in BR Blue with large double arrow logos, plated headcode panels and high intensity light. Model Specification: Highly detailed model based on extensive research including 3D scanning and original works drawings Heavy die-cast chassis and underframe, giving an overall weight of 195g Powerful five-pole skew-wound motor with dual flywheels Dual bogie drive with a total of 12 driving wheels Brass axle bearings All wheel electrical pickup Front and rear kinematic NEM coupling system Die-cast metal buffers Separately fitted metal steps, grills and handrails Accessory bag contains optional fit snow ploughs, vacuum pipes and couplings Electronics: Directional lighting Cab interior lighting (requires DCC to operate) Separately controllable taillights (requires DCC to operate) Next-18 Decoder socket compatible with HM7000 system Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode box with marker lights fitted Plated boiler port High intensity light fitted in nose ends Livery: BR Blue with large double arrows Grey roof Indomitable name plates - TT:120 Scale

Hornby BR Class 37 37413 'Loch Eil Outward Bound' Transrail (TT)

BR Class 37 37413 'Loch Eil Outward Bound' Transrail Introducing Transrail Class 37 'Loch Eil Outward Bound' 37413, including all the same great features presented on the English Electric Class 37 model releases late last year, such as working lights, weighty die-cast chassis, and optional bodyshells depending on subclass. The ‘Tractor’ is a must have for any TT:120 layout, with this model representing No.37413 ‘Loch Eil Outward Bound’ in Transrail Triple Grey Livery, complete with Transrail company logos. Model Specification: Highly detailed model based on extensive research and design, including historical drawings and laser scans Die-cast chassis and underframe giving the mode a weight of 170g Assortment of separately fitted parts, including lamp brackets, speedometer, sandpipes, and roof horns Etched metal roof grille Detailed cab interior Powerful five-pole motor with dual flywheels providing power to all wheels Electrical pick-ups on all wheels Brass axle bearings Pivoting NEM coupling sockets Accessory pack that includes body removal tool, optional snowplough and bufferbeam pipes Minimum 2nd radius curves Electronics: Working directional and cab lights, including Day/Night mode (please note some functionality will only work on DCC) Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-on body Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Class 37/4 Plated headcodes High intensity lights Nose-mounted ETH Oval buffers Plated roof boiler plate Livery: Transrail Triple Grey Livery Named ‘Loch Eil Outward Bound’ St Blazey Lizard Depot plaques Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 43 HST 43136 & 43189 FGW Gold Stripe (TT)

BR Class 43 HST 43136 & 43189 FGW Gold Stripe  The Class 43 HST Power Cars and Mk3 trailing coaches have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce a further example in TT:120, depicting 43136 and 43189 ‘Railway Heritage Trust’ in First Great Western Green, Gold and White livery. Featuring working directional and cab lights, a coreless motor, die-cast chassis and numerous separately fitted parts, the TT:120 Class 43 HST makes an excellent addition to your collection. Model Specification: Twin pack of highly detailed models extensive research and design Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab and guard door handrails, ETH sockets, underframe equipment Brass exhaust cover Detailed cab interior Coreless motor in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Electronics: Working directional and cab lights Next18 DCC Decoder socket in motorised/unmotorised cars compatible with HM7000 system Decoder socket housed underneath clip-on body for easy access. No screwdriver required Space for HM7000-N18TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Tooling: Single roof fan Long exhaust shroud Early style of marker lights Livery: First Great Western Green, Gold and White, commonly referred to as ‘Fag Packet’ livery Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 08 08499 EWS (TT)

BR Class 08 08499 EWS  Hornby are pleased to present a further two new colourful identities of the ever-popular BR Class 08 shunting diesel engine in the April Range Launch. Featuring a diecast chassis, coreless motor, all-wheel drive, immaculate paint application and much more, this ubiquitous shunting loco is undoubtedly going to stand out on your TT:120 layout. This example depicts No.08499 in early 2000’s corporate EWS Maroon & Gold livery, whilst allocated to depots in the South-West of England. Model Specification: Highly detailed model based on extensive research and design Diecast chassis Assortment of separately fitted parts, including body grabrails, cab steps, sandpipe fillers and buffer stocks Brass coupling rods Detailed cab interior Powerful coreless motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes bufferbeam pipes Minimum 2nd radius curves Electronics: 6-Pin DCC Decoder Socket compatible with HM7000 system Livery: EWS Maroon & Gold Yellow Coupling Rods Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Purple (TT)

BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Purple Adding to the ever-popular BR Class 08 diesel range, is Colchester TMD D3760. Featuring a die-cast chassis, coreless motor, all-wheel drive, and immaculate paint application, this ubiquitous shunting locomotive will stand out on your TT:120 layout. This example depicts No.08593/D3760 in retro BR Lined Purple livery, complete with ‘Cycling Lion’ Early Emblem and named ‘Colchester TMD’ as per 1990’s condition when based at either Colchester or Ipswich. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Assortment of separately fitted parts, including body grabrails, cab steps, sandpipe fillers and buffer stocks Brass coupling rods Detailed cab interior Powerful coreless motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes bufferbeam pipes Minimum 2nd radius curves Electronics: 6-Pin DCC Decoder Socket compatible with HM7000 system Livery: Retro BR Lined Purple, complete with early emblems Crisply applied Red lining White roof Wasp stripes Semi-gloss finish Faithfully created using accurate colours and fonts - TT:120 Scale

Hornby BR Class 30 D5502 BR Green (Sound Fitted) (TT)

BR Class 30 D5502 BR Green (Sound Fitted) Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3071TXSM is DCC Sound Fitted and depicts Class 30 D5502 in BR Green with duck egg blue stripes. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional buffer beam pipes Minimum 2nd radius curves Electronics: Space for HM7070 Power Bank for uninterrupted running Sound: Utilises high-fidelity HM7000 sound file Chassis-mounted speaker Tooling: Indicator headcode discs 'Skinhead’ roof Toffee Apple cab style Mirrlees exhaust Side steps Oil filler Water filler Open boiler port Without door louvres Livery: BR Green with duck egg stripes Later British Railways crests Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 30 D5502 BR Green (TT)

BR Class 30 D5502 BR Green w/ Duck Egg Lining Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3071M depicts Class 30 D5502 in BR Green with duck egg blue stripes. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional buffer beam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Indicator headcode discs ‘Skinhead’ roof Toffee Apple cab style Mirrlees exhaust Side steps Oil filler Water filler Open boiler port Without door louvres Livery: BR Green with duck egg stripes Later British Railways crests Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31219 BR Civil Engineers "Dutch" (TT)

BR Class 31 31219 BR Civil Engineers "Dutch" Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3074M depicts Class 31219 in BR Civil Engineers ‘Dutch’ Grey & Yellow. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode roof High intensity light NRN roof pods Later cab style English Electric exhaust Plated side steps Plated oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Civil Engineers ‘Dutch’ Grey and Yellow Silver BR double arrows Blue Stratford Sparrow depot plaques Full yellow ends Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31237 BR Railfreight Red Stripe (TT)

BR Class 31 31237 BR Railfreight Red Stripe Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3073M depicts Class 31237 in BR Railfreight Grey with solebar red stripe. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Plated headcode roof Later cab style English Electric exhaust Plated side steps Plated oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Railfreight grey Solebar red stripe Full yellow ends Large bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31270 BR Blue (Sound Fitted) (TT)

BR Class 31 31270 BR Blue (Sound Fitted) Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3072TXSM is DCC Sound Fitted depicts Class 31270 in BR Blue. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed underneath clip-fit body for easy access Space for HM7070 Power Bank for uninterrupted running Sound: Utilises high-fidelity HM7000 sound file Chassis-mounted speaker Tooling: Glazed headcode roof Later cab style English Electric exhaust Plated side steps Oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Blue Full yellow ends Small bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby BR Class 31 31270 BR Blue (TT)

BR Class 31 31270 BR Blue Hornby are delighted to present the newest addition to the TT:120 diesel locomotive family: the Brush Type 2 Class 30 and 31. This brand-new, highly detailed tooling covers the extensive history of the ‘Gargoyles’: from skinhead examples from the late 50s, to modern Class 31s retrofitted with high intensity lights and NRN roof pods. This exciting new range of Type 2s will be available in either DCC Ready or Sound Fitted format. TT3072M depicts Class 31270 in BR Blue. Model Specification: Highly detailed model based on extensive research and design Die-cast chassis Wealth of separately fitted parts, including front end handrails, disc headcodes (where applicable) and roof grille Detailed cab interior Powerful five-pole motor providing power to all wheels Electrical pick-ups on all wheels Pivoting NEM coupling sockets Accessory pack that includes optional bufferbeam pipes Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system. Decoder socket housed underneath clip-fit body for easy access. Space for HM7070 Power Bank for uninterrupted running Tooling: Glazed headcode roof Later cab style English Electric exhaust Plated side steps Oil filler Plated water filler Plated boiler port Plated front door With door louvres Livery: BR Blue Full yellow ends Small bodyside double arrows Authentic livery colours and font types Semi-gloss finish - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 45315 BR Lined Black (Early) (SF) (TT)

Stanier 5MT 'Black 5' 45315 BR Lined Black (Early) (Sound Fitted) The Stanier 5MT 'Black 5' is the latest addition to the TT:120 steam locomotive family., featuring the expertly researched and highly accurate CAD from its OO gauge cousin. This DCC sound-fitted version if the LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout. This BR Stanier 5MT model depicts No.45315 in British Railways Lined Black livery, with early ‘Cycling Lion’ emblem on the tender. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC sound decoder fitted is compatible with HM7000 system Space for HM7070 Power Bank for uninterrupted running Sound: Utilises same high-fidelity HM7000 sound file present on OO gauge version Assembled using live recordings of Black 5 locomotives. Tender speaker Tooling: Riveted smokebox door High smokebox steam lance Rivetted bufferbeam Capped top feed Without AWS Welded tender Livery: BR Lined Black with early ‘Cycling Lion’ emblem Authentic colours and typefaces used Gloss finish to locomotive except for cab and smokebox, which are matt. Era 4 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 45315 BR Lined Black (Early) (TT)

Stanier 5MT 'Black 5' 45315 BR Lined Black (Early) The 'Black 5's are now available in TT:120 scale! This iconic Stanier 5MT ‘Black 5’ model features the expertly researched and highly accurate CAD from its OO gauge cousin and is DCC ready for upgrade to HM7000 control. This LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout. This 'Black 5' model depicts No.45315 in British Railways Lined Black livery, with early ‘Cycling Lion’ emblem on the tender. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed in tender for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Riveted smokebox door High smokebox steam lance Rivetted bufferbeam Capped top feed Without AWS Welded tender Livery: BR Lined Black with early ‘Cycling Lion’ emblem Authentic colours and typefaces used Gloss finish to locomotive except for cab and smokebox, which are matt. Era 4 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 45446 BR Lined Black (Late) (SF) (TT)

Stanier 5MT 'Black 5' 45446 BR Lined Black (Late) (SF) Here come the 'Black 5's - our latest addition to the TT:120 steam locomotive family. Featuring the expertly researched and highly accurate CAD from its OO gauge cousin, this BR Stanier 5MT is pre-Sound Fitted. This LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout, depicting No.45446 in British Railways Lined Black livery, with later ‘Lion and Wheel’ crest on the tender. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC sound decoder fitted is compatible with HM7000 system Space for HM7070 Power Bank for uninterrupted running Sound: Utilises same high-fidelity HM7000 sound file present on OO gauge version Assembled using live recordings of Black 5 locomotives. Tender speaker Tooling: Riveted smokebox door No smokebox steam lance Rivetted bufferbeam Capped top feed With AWS Welded tender Livery: BR Lined Black with late crest on the tender 1960’s style OHWL stickers Sir W.G Armstrong Whitworth & Co. LTD builders plate Authentic colours and typefaces used Gloss finish to locomotive except for cab and smokebox, which are matt. Era 5 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 45446 BR Lined Black (Late) (TT)

Stanier 5MT 'Black 5' 45446 BR Lined Black (Late) This BR Stanier 5MT 'Black 5' 45446 was created using the expertly researched and highly accurate CAD from its OO gauge cousin, and is DCC Ready for upgrade to digital control if required. This LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout, depicting No.45446 in British Railways Lined Black livery, with later ‘Lion and Wheel’ crest on the tender. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed in tender for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Riveted smokebox door No smokebox steam lance Rivetted bufferbeam Capped top feed With AWS Welded tender Livery: BR Lined Black with late crest on the tender 1960’s style OHWL stickers Sir W.G Armstrong Whitworth & Co. LTD builders plate Authentic colours and typefaces used Gloss finish to locomotive except for cab and smokebox, which are matt. Era 5 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 5408 LMS Lined Black (Sound Fitted) (TT)

Stanier 5MT 'Black 5' 5408 LMS Lined Black (Sound Fitted) The iconic Stanier 5MT ‘Black 5’ is the latest addition to the TT:120 steam locomotive family. Featuring the expertly researched and highly accurate CAD from its OO gauge cousin, and available in a Sound-Fitted format, this LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout.This BR Stanier 5MT 'Black 5' model depicts No. 5408 in late 1930’s LMS black livery with red lining, shaded gold lettering and numerals. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC sound decoder fitted, which is compatible with HM7000 system Space for HM7070 Power Bank for uninterrupted running Sound: Utilises same high-fidelity HM7000 sound file present on OO gauge version Assembled using live recordings of Black 5 locomotives. Tender speaker Tooling: Riveted smokebox door High smokebox steam lance Flush bufferbeam Capped top feed Slide bar vacuum pump fitted Without AWS Welded tender Livery: LMS Lined Black 1936 style vermillion shaded gold lettering and numerals Gloss finish to locomotive except for cab and smokebox, which are matt. Era 3 - TT:120 Scale

Hornby Stanier 5MT 'Black 5' 5408 LMS Lined Black (TT)

Stanier 5MT 'Black 5' 5408 LMS Lined Black  The latest addition to the TT:120 steam locomotive family is the iconic Stanier 5MT ‘Black 5’. Featuring the expertly researched and highly accurate CAD from its OO gauge cousin, and with a DCC Ready decoder socket, this LMS mixed-traffic workhorse is sure to make an impression on any TT:120 layout.This model depicts No. 5408 in its late 1930’s LMS black livery, with red lining, shaded gold lettering and numerals. Model Specification: Highly detailed model based on extensive research and design from the critically acclaimed OO Gauge version Die-cast boiler and running plate Wealth of separately fitted parts, including boiler handrails, steam pipes, whistles, steps, and sanding pipes. Detailed cab interior Powerful coreless motor providing power to locomotive driving wheels Electrical pick-ups on driving wheels and tender wheels Brass connector rods and slide bars Pivoting NEM coupling sockets Accessory pack that includes optional snowplough and decorative coupling hook Minimum 2nd radius curves Electronics: Next18 DCC Decoder socket compatible with HM7000 system Decoder socket housed in tender for easy access Space for HM7070 Power Bank for uninterrupted running Tooling: Riveted smokebox door High smokebox steam lance Flush bufferbeam Capped top feed Slide bar vacuum pump fitted Without AWS Welded tender Livery: LMS Lined Black 1936 style vermillion shaded gold lettering and numerals Gloss finish to locomotive except for cab and smokebox, which are matt. Era 3 - TT:120 Scale

Hornby LNER J50 Class 68958 BR Black (Early) (TT)

LNER J50 Class 68958 BR Black (Early) Hot on the heels of the first run of J50’s, is this BR (Early) J50 Class 68958 tank engine for your TT:120 collection. Moulded in both die-cast and plastic, this characterful locomotive looks and performs excellently thanks to all-wheel pickups and a smooth coreless motor. For those operating on DCC, a 6-Pin decoder socket is located within the boiler and is compatible with HM7000.  This example depicts No.68958 in BR Black livery, with early emblems on the tank sides. Model Specification: Based on new J50 tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, chimney, safety valves, handrails, lamp irons and buffers. Brass double-jointed connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system. Tooling: Smokebox door numberplate Coal rails Livery: BR Plain Black Livery ‘Cycling Lion’ Early Emblem on tank sides Authentic colours and typefaces used Semi-gloss finish Era 4. - TT:120 Scale

Hornby A1X Terrier 10 Isle of Wight Central Railway Lined Maroon (TT)

A1X Terrier 10 Isle of Wight Central Railway Lined Maroon The delightful LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive is back in TT:120 scale, featuring the latest tooling suite from 2025. This beautiful representation of the ever-popular Class A1 perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including the option for digital command control via a 6-pin decoder socket (decoder sold seperately). This particular example depicts No.10 in Isle of Wight Central Railway Lined Maroon livery. Model Specification: Based on the highly accurate 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump fitted Livery: IOW Lined Maroon - TT:120 Scale

Hornby A1X Terrier 655 'Stepney' LB&SCR Improved Engine Green (TT)

A1X Terrier 655 'Stepney' LB&SCR Improved Engine Green The delightful TT:120 scale LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive is back, utilising the highly accurate tooling suite from 2025. This beautiful representation of the ever-popular Class A1 perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket.  This particular example depicts No.655 ‘Stepney’ in London Brighton & South Coast Railway Improved Engine Green. Model Specification: Based on 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system. Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump fitted. Livery: LB&SCR Improved Engine Green Maroon chassis Era 2. - TT:120 Scale

Hornby A1X Terrier 735 LSWR Lined Green (TT)

A1X Terrier 735 LSWR Lined Green  This delightful TT:120 scale LB&SCR A1/A1X 0-6-0 Terrier Steam Locomotive model features the highly accurate 2025 tooling suite. A beautiful representation of the ever-popular Class A1, the model perfectly captures the diminutive character of the prototype, and has been designed for smooth and reliable operation, including provision for digital command control via a 6-pin decoder socket. This particular example depicts No.735 in London and South Western Railway Lined Green livery. Model Specification: Based on new 2025 A1/A1X Terrier tooling suite Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers. Brass connector rods with metal securing pins Detailed cab interior Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Capable of traversing 1st radius curves, but recommended minimum is 2nd radius. Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes fitted Small cab bunker with no coal rails Westinghouse pump removed Livery: LSWR Lined Green Livery Maroon edging to tank and cab sides - TT:120 Scale

Hornby Coalfield Freight Class 37 Train Set (Sound Fitted) (TT)

Coalfield Freight Class 37 Train Set (Sound Fitted) Take a step back in time with ‘Coalfield Freight’ Train Set, the perfect introduction into the terrific world of TT:120 gauge from Hornby.  Whether you’re a beginner, returning to the hobby or a seasoned railway modeller, this starter set has everything you need to get started in the space-saving scale of ‘Tabletop’ TT:120. This set includes a highly detailed model of a Class 37 Diesel locomotive, three colourful wagons, oval starter track, siding and controller. Not only is this set easy to build and endlessly entertaining, the well-designed and durable TT:120 locomotives mean you can rest assured your train set will work for many years to come. With a plethora of separately available extension track packs, rolling stock, buildings and accessories, the possibilities for expanding your collection are endless! Inside the box, you’ll find a highly detailed, motorised diesel locomotive alongside three British Railway freight hopper wagons, each beautifully decorated. The set includes all the track you need to create your miniature railway, as well as an electric controller for smooth operation. Includes: BR Class 37 37799 'Sir Dyfed County of Dyfed' in Triple Grey Coal Sector Livery 3x HFA MGR Coal Hoppers in Coal Sector Livery 3rd Radius Oval of Track with siding (125cm x 84cm) Wall Plug Transformer DCC Power Connecting Track Re-Railer - TT:120 Scale

Hornby Coalfield Freight Class 37 Train Set (TT)

Coalfield Freight Class 37 Train Set Take a step back in time with ‘Coalfield Freight’ Train Set, the perfect introduction into the terrific world of TT:120 gauge from Hornby.  Whether you’re a beginner, returning to the hobby or a seasoned railway modeller, this starter set has everything you need to get started in the space-saving scale of ‘Tabletop’ TT:120. This set includes a highly detailed model of a Class 37 Diesel locomotive, three colourful wagons, oval starter track, siding and controller. Not only is this set easy to build and endlessly entertaining, the well-designed and durable TT:120 locomotives mean you can rest assured your train set will work for many years to come. With a plethora of separately available extension track packs, rolling stock, buildings and accessories, the possibilities for expanding your collection are endless! Inside the box, you’ll find a highly detailed, motorised diesel locomotive alongside three British Railway freight hopper wagons, each beautifully decorated. The set includes all the track you need to create your miniature railway, as well as an electric controller for smooth operation. Includes: BR Class 37 37799 'Sir Dyfed County of Dyfed' in Triple Grey Coal Sector Livery 3x HFA MGR Coal Hoppers in Coal Sector Livery 3rd Radius Oval of Track with siding (125cm x 84cm) DC Train Controller Wall Plug Transformer Power Connecting Track Re-Railer - TT:120 Scale

Hornby BR Class 43 HST 43128 & 43135 Scotrail Inter7City (Sound Fitted)

BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack (Sound Fitted) The Class 43 HST Power Cars have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce this special commemorative train pack in OO Gauge, depicting 43128 and 43135 in ScotRail ‘InterCity 7’ livery, which are still in service as part of the last HST fleet in passenger operation in the UK. Based on the refreshed tooling suite and featuring working directional and cab lights, working roof fans, 5-pole motor with twin flywheels in the motorised car, diecast chassis and numerous separately fitted parts, this train pack is a must-have for collectors and fans of this classic British design. This train pack is DCC Sound Fitted with a sound decoder in both power cars. Features: Twin pack of highly detailed Class 43 models Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab handrails, underframe equipment and roof exhaust shroud Detailed cab interior 5-pole motor with twin flywheels in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Working directional and cab headlights Working roof fans 21-Pin sound decoder fitted in both power cars Speaker in both power cars Space for HM7070 Power Bank for uninterrupted running Utilises high-fidelity HM7000 sound file created using live recordings of Class 43 locomotives. - OO Scale

Hornby BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack

BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack The Class 43 HST Power Cars have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce this special commemorative train pack in OO Gauge, depicting 43128 and 43135 in ScotRail ‘InterCity 7’ livery, which are still in service as part of the last HST fleet in passenger operation in the UK. Based on the refreshed tooling suite and featuring working directional and cab lights, working roof fans, 5-pole motor with twin flywheels in the motorised car, die-cast chassis and numerous separately fitted parts, this train pack is a must-have for collectors and fans of this classic British design. Features: Twin pack of highly detailed Class 43 models Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab handrails, underframe equipment and roof exhaust shroud Detailed cab interior 5-pole motor with twin flywheels in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Working directional and cab headlights Working roof fans DCC Ready with 21-Pin decoder socket in motorised/dummy cars compatible with HM7000 system Space for HM7000-21TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Some light functions will only operate to their fullest capability on DCC - OO Scale 

Hornby SR Merchant Navy 21C4 'Cunard White Star' (TXS Steam Generator)

SR Merchant Navy 21C4 'Cunard White Star' (TXS Steam Generator) The popular Bulleid Pacific Merchant Navy is back in OO gauge with a brand new livery and steam generator technology. This highly detailed model represents the air-smoothed 'Spam Can', also known as 21C4 'Cunard White Star' in Southern Railways' malachite green. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Details: Highly detailed cab with fully decorated backhead and decorated instrument dials  Opening cab roof vent  Removable simulated coal load with fully detailed tender bunker  Accurately modelled Merchant Navy Bullied-Firth-Brown wheels  Modified 21C4 'widows peak' front end streamlining and chimney arrangement  5000 gallon tender with rear access ladders.  Cast trailing truck  Separately fitted nameplate, number plate, and company ownership plate  Circular smokebox door company plate  Sprung metal buffers  Heavy die-cast chassis, pony truck, and trailing truck  Features: Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element).  Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers and HM7000 app control.  Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect.  Adjustable steam output settings via the decoder  Water reservoir for up to 20 minutes of continuous steam running  Die-cast connecting rods and valve gear  Powerful 5-pole skew-wound motor  Flywheel with cardan shaft arrangement for smooth running  Oilite main drive bearings Wheel pickups on tender and driven locomotive wheelsets  Pogo pin wheel pickup arrangement for easy pickup servicing  8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling.  Front and rear NEM coupling pockets, with narrow tension lock couplings  Optional fit rear flanged wheelset (only recommended for larger layouts with sweeping curves or display purposes).  - OO Scale 

Hornby Railroad: Class 66 GBRf 66775 'HMS Argyll'

Railroad: Class 66 GBRf 66775 'HMS Argyll' Product Information: The Railroad GBRf Class 66 66775 'HMS Argyll' model is a faithful replica of the original locomotive, with realistic detailing and space for a 21-pin sound decoder for effortless upgrade. History: Built in Muncie, Indiana and entering service under No. 66775, this locomotive was named in 2017 after the famous and oldest serving Type 23 frigates in the Royal Navy, ‘HMS Argyll’. It carries the pennant number F231 on its bodyside with the Royal Navy white ensign and crest on the cab sides in celebration of the famous Frigate. 

Hornby Railroad: Class 66 GBRf 66775 'HMS Argyll' (DCC Sound Fitted)

Railroad: Class 66 GBRf 66775 'HMS Argyll' (DCC Sound Fitted) Product Information: The Railroad GBRf Class 66 66775 'HMS Argyll' model is a faithful replica of the original locomotive, featuring a HM7000 21-pin sound decoder preloaded with realistic Class 66 sound recordings and etched nameplates. History: Built in Muncie, Indiana and entering service under No. 66775, this locomotive was named in 2017 after the famous and oldest serving Type 23 frigates in the Royal Navy, ‘HMS Argyll’. It carries the pennant number F231 on its bodyside with the Royal Navy white ensign and crest on the cab sides in celebration of the famous Frigate. 

Hornby Railroad: Royal Mail Travelling Post Office 80331

Railroad: Royal Mail Travelling Post Office 80331 The Traveling Post Office (TPO) has been a fixture on Britain’s railways since mail was first carried on trains in the 1830s.  The sorting of mail in transit gradually reduced in the 21st century as mechanised sorting at depots became commonplace and concerns about the safety of workers carrying out letter-sorting at increased main line speeds. The last TPO using carriages in the UK took place during the night of 9th January 2004. After that, a fleet of Royal Mail-branded Class 325 EMUs continued to carry parcels by rail, but these too ceased in 2024. TPOs could collect and deposit mail on the move by means of lineside apparatus. Several of these vehicles have survived in preservation. This Hornby RailRoad model coach features a working mailbag transfer mechanism. - OO Scale

Hornby Railroad: TTA Tanker Esso, Mobil & Total Triple Pack

Railroad: TTA Tanker Esso, Mobil & Total Triple Pack ‘TTA’ petroleum tankers such as these were a regular sight on Britain’s railways from the 1960s, with the last withdrawn in early 2000.  This colourful OO gauge model triple back offers three of the most popular liveries to be seen during that time: Esso, with its distinctive blue oval and red lettering on a grey tank; Mobil fuel oils, with its distinctive ‘flying horse’ emblem and bright red tank; and Total, with its tri-colour stripe logo against a plain black tank.  This RailRoad triple pack is great way to expand your oil or petroleum tanker train. - OO Scale

Hornby Railroad: 12T Tank Wagon Mobil Black No.64

Railroad: 12T Tank Wagon Mobil Black No.64 Based on the Railway Clearing House standard tank wagon design of 1907, hundreds of these 12-ton wagons were used by private owners to transport liquid products, including fuel oil and kerosene, among other products.  The tanks sat on a wooden frame and were secured using steel bracing straps. They were commonplace through the 1960s, when they started to be replaced by larger capacity tank wagons, though examples could still be found in use into the 1980s.  This OO gauge model tank wagon example is in the distinctive ‘Mobil’ colour scheme. - OO Scale

Hornby Railroad: 12T Tank, PO 7 Plank & Cattle Wagon Triple Pack

Railroad: 12T Tank, PO 7 Plank & Cattle Wagon Triple Pack Triple-wagon packs are a great way to increase the freight stock on any layout and save money at the same time. This OO gauge model railway wagon pack includes three different types of wagon to add variety, including a private owner open wagon, a 12-ton tank wagon, and a cattle wagon. - OO Scale

Hornby Railroad: 20T ZTV Brake Van BR Departmental "Dutch" DB950406

Railroad: 20T ZTV Brake Van BR Departmental "Dutch" DB950406 Brake vans were an essential fixture on freight trains where the continuous brake was not available. Loose-coupled wagons only had hand-operated ‘sprag’ brakes which had to be applied individually, for example, before descending a gradient.  Trains were prone to broken coupling chains, so the brake van was essential for bringing a train to a halt under such circumstances. From 1968, the requirement for a brake van to be coupled to a fitted train (wagons with vacuum brakes) was removed from the rule book. BR adopted the LNER ‘Toad D’ van as the basis for its own standard brake van design.  This OO gauge model van is an example of a BR 20T Brake Van. - OO Scale

Hornby Railroad: BR Mk1 NKA 94157 "Super GUV" RES

Railroad: BR Mk1 NKA 94157 "Super GUV" RES Rail Express Services (RES) was the BR sector responsible for the transport of mail and parcels, including the Travelling Post Office. General Utility Vans (GUVs) were used in large numbers to transport mail and parcels, though some were used as newspaper vans.  These vehicles were part of the BR Mk1 coach family and 907 examples were built between 1956 and 1960 by BR at its York, Doncaster and Glasgow works. A number were also produced under contract by the Pressed Steel Company Ltd at Cowley, near Oxford. With a carrying capacity of 13.8 tons (14 tonnes) these multi-door bogie vans were versatile, some even being converted for carrying motor vehicles. Some train operating companies still use them, and a number have found further use at heritage railways.  This RailRoad RES Mk1 Super Guv model coach is a durable, detailed option for your model railway collection. - OO Scale

Hornby Railroad: Cattle Wagon North British Grey

Railroad: Cattle Wagon North British Grey Used primarily for transporting cattle, although they were also used to move sheep, these wagons were a common sight across Britain’s railways. They could be found at rural stations where there was a cattle dock and pens. This OO gauge model cattle wagon example is grey with North British markings. - OO Scale

Hornby Railroad: Lumo Class 803 842001 Coach

Railroad: Lumo Class 803 842001 Coach Lumo are an open-access operator owned by FirstGroup, running train services between London King’s Cross and Edinburgh Waverley using a fleet of Hitachi AT300 Class 803 electric multiple units. Five sets are currently operated, each of five cars, with a single class of accommodation throughout. This OO gauge RailRoad Lumo coach model is a detailed, durable way to bring this design to life on your model railway layout. Additional model coaches are available to create realistic five-coach formations. - OO Scale

Hornby Railroad: Lumo Class 803 843001 Coach

Railroad: Lumo Class 803 843001 Coach Lumo are an open-access operator owned by FirstGroup, running train services between London King’s Cross and Edinburgh Waverley using a fleet of Hitachi AT300 Class 803 electric multiple units. Five sets are currently operated, each of five cars, with a single class of accommodation throughout. This OO gauge RailRoad Lumo coach model offers a durable, detailed way to bring the design to life on your model railway layout. Additional model coaches are available to create realistic five-coach formations. - OO Scale

Hornby Railroad: Lumo Class 803 844001 Coach

Railroad: Lumo Class 803 844001 Coach Lumo are an open-access operator owned by FirstGroup, running train services between London King’s Cross and Edinburgh Waverley using a fleet of Hitachi AT300 Class 803 electric multiple units. Five sets are currently operated, each of five cars, with a single class of accommodation throughout. This OO gauge RailRoad Lumo Coach model offers a durable, detailed way to bring this design to life on your model railway layout. Additional model coaches are available to create realistic five-coach formations. - OO Scale

Hornby Railroad: Southeastern Highspeed Class 395 Coach

Railroad: Southeastern Highspeed Class 395 Coach Class 395 ‘Javelins’ are dual-voltage EMUs built for high-speed commuter services, operated by Southeastern. Add this OO gauge single coach to your Class 395 Train Pack to create a five- or six-coach formation. - OO Scale

Hornby Railroad: BR Mk3 TGS 44086 GWR

Railroad: BR Mk3 TGS 44086 GWR British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, initially they were intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. GWR-liveried Mk3 coaches were formed into full-length HST sets and from 2019, in sets of four, to operate as GWR ‘Castle’ sets, which ran as such until May 2024. This RailRoad coach model represents a Trailer Guard Standard coach in GWR livery. - OO Scale

Hornby Railroad: BR Mk4 DVT 82200 Intercity

Railroad: BR Mk4 DVT 82200 Intercity Following on from the Mk3 coach, the Mk4s were built between 1989 and 1992 at Metro-Cammell’s Washwood Heath facility for the newly-electrified InterCity 225 services on the East Coast Main Line. A total of 282 carriages were built, to maintain a fleet of 30 fixed formations. Each comprised of nine vehicles, operating with a Class 91 locomotive and a Driving Van Trailer on the other end to allow trains to operate in both directions without needing to turn the locomotive. The Mk4 is an all-steel design which incorporates a number of improvements over the previous Mk3s. Most notably, the inclusion of automatic push-button operated plug-type doors in place of the manually-operated slam doors. The body shells, which were built by BREL and Breda in Milan, also have fully sealed gangways and controlled emission toilets (CETs). This OO gauge model coach represents a Driving Van Trailer (DVT) in BR InterCity livery. - OO Scale

Hornby Railroad: BR Mk4 FO 11241 Intercity

Railroad: BR Mk4 FO 11241 Intercity Following on from the Mk3 coach, the Mk4s were built between 1989 and 1992 at Metro-Cammell’s Washwood Heath facility for the newly-electrified InterCity 225 services on the East Coast Main Line. A total of 282 carriages were built to maintain a fleet of 30 fixed formations. Each one comprised of nine vehicles, operating with a Class 91 locomotive and a Driving Van Trailer on the other end to allow trains to operate in both directions without needing to turn the locomotive. The Mk4 is an all-steel design which incorporates a number of improvements over the previous Mk3s, most-notably the inclusion of automatic push-button operated plug-type doors in place of the manually-operated slam doors. The body shells, which were built by BREL and Breda in Milan, also have fully sealed gangways and controlled emission toilets (CETs). This RailRoad model coach is a durable replica of a First Class Open coach in BR InterCity livery. - OO Scale

Hornby Railroad: BR Mk4 RFB 10321 Intercity

Railroad: BR Mk4 RFB 10321 Intercity Following on from the Mk3 coach, the Mk4s were built between 1989 and 1992 at Metro-Cammell’s Washwood Heath facility for the newly-electrified InterCity 225 services on the East Coast Main Line. A total of 282 carriages were built, to maintain a fleet of 30 fixed formations. Each comprised of nine vehicles, operating with a Class 91 locomotive and a Driving Van Trailer on the other end to allow trains to operate in both directions without needing to turn the locomotive. The Mk4 is an all-steel design which incorporates a number of improvements over the previous Mk3s. Most notably, the inclusion of automatic push-button operated plug-type doors in place of the manually operated slam doors. The body shells, which were built by BREL and Breda in Milan, also have fully sealed gangways and controlled emission toilets (CETs). This OO gauge model coach represents a Buffet Car in BR InterCity livery. - OO Scale

Hornby Railroad: BR Mk4 TSO 12440 Intercity

Railroad: BR Mk4 TSO 12440 Intercity Following on from the Mk3 coach, the Mk4s were built between 1989 and 1992 at Metro-Cammell’s Washwood Heath facility for the newly-electrified InterCity 225 services on the East Coast Main Line. A total of 282 carriages were built, to maintain a fleet of 30 fixed formations. Each comprised of nine vehicles, operating with a Class 91 locomotive and a Driving Van Trailer on the other end to allow trains to operate in both directions without needing to turn the locomotive. The Mk4 is an all-steel design which incorporates a number of improvements over the previous Mk3s. Most notably, the inclusion of automatic push-button operated plug-type doors in place of the manually-operated slam doors. The body shells, which were built by BREL and Breda in Milan, also have fully sealed gangways and controlled emission toilets (CETs). This OO gauge coach model is a replica of a Second Class (Trailer Second) open coach in BR InterCity livery. - OO Scale

Hornby The Beatles: Magical Mystery Tour Mk1 GUV

The Beatles: Magical Mystery Tour Mk1 GUV Bring a piece of music history to your layout with the Hornby Magical Mystery Tour GUV, inspired by The Beatles’ iconic 1967 film. Featuring a vibrant, eye-catching livery that faithfully captures the psychedelic style of the original tour, this GUV adds a splash of colour and nostalgia to any OO gauge railway.  Expertly detailed and crafted with Hornby’s signature quality, it’s a must-have for collectors, Beatles fans, and model railway enthusiasts alike. Relive the magic of The Beatles while enhancing your layout with this unique and collectible piece. - OO Scale

Hornby PO 5 Plank Wagon Charles Gush & Son Exminster No.20

PO 5 Plank Wagon Charles Gush & Son Exminster No.20 Established in the late 1870s by Charles Gush’s father, Samuel, the business started as a baker and grocer in Exminster, Devon, before expanding as General Merchants. Their services included the collection of coal from local sidings and distribution by lorry, and it operated through the 1950s and ‘60s.  Three wooden-bodied wagons were acquired for the movement of coal, numbered 10, 20 and 30. Our 5 Plank Wagon model replica is a faithful example of No.20 and the perfect addition to your freight model railway. - OO Scale

Hornby PO 5 Plank Wagon Snow & Sons Coal & Coke Wallingford No.65

PO 5 Plank Wagon Snow & Sons Coal & Coke Wallingford No.65 H.W. Snow & Sons were coal and coke merchants based in Wallingford, Oxfordshire. Their wagons featured the distinctive diagonal red lozenge and transported coal from the GWR main line at Cholsey along the branch line to Wallingford for transfer to road.  This charming 5 Plank Wagon model beautifully replicates one of their fleet, bringing coal freight to your model railway layout. - OO Scale

Hornby PO 7 Plank Wagon Mortimore Chippenham No.56

PO 7 Plank Wagon Mortimore Chippenham No.56 Thousands of coal wagons were built to a broadly standard design for use by private companies who had rail-connected coal yards. Mortimore’s were coal merchants at Chippenham, Wiltshire.  This highly detailed OO gauge scale model is an excellent representation of their 7 plank wagon, and is perfect for your freight model railway. - OO Scale

Hornby PO 7 Plank Wagon S.Skinner Coal Melksham No.1

PO 7 Plank Wagon S.Skinner Coal Melksham No.1 Although the Southern Railway was predominantly a passenger-carrying network, a surprising amount of freight was moved by rail too, especially coal, as this was needed to heat the homes of the railway’s passengers. Stephen Skinner was a Kent-based coal merchant established in the late 1800s.  This highly detailed OO gauge scale model is an excellent representation of their 7 plank wagon, and is perfect for your freight model railway. - OO Scale

Hornby 21T Hopper 'E269527' BR Grey

21T Hopper 'E269527' BR Grey The BR 21-ton hopper wagon was based on an earlier LNER design which it continued to build in large numbers through the 1950s. Designed for carrying coal, they either had riveted or welded bodies. Many were rebodied from the mid-1960s as they had become badly corroded or distorted through heavy usage.  This OO gauge model 21T Hopper Wagon is an excellent replica of these popuar designs. - OO Scale

Hornby Touax KFA Intermodal Flat '93461' (Empty)

Touax KFA Intermodal Flat '93461' (Empty) The KFA intermodal wagons were produced using bogies and components reclaimed from redundant wagons, such as the TEA tankers, and were built in Finland in the late 1980s for Tiphook Rail. In total, 240 of these 60ft-long wagons were produced.  This highly detailed flatbed wagon OO gauge model is a stylish addition to your freight model railway. - OO Scale

Hornby Shepherd Neame Brewery 'Spitfire Amber Ale' Tanker Wagon

Shepherd Neame Brewery 'Spitfire Amber Ale' Tanker Wagon This is a beautifully detailed Hornby model of the Shepherd Neame brewery tanker, proudly featuring the iconic Spitfire Kentish Amber Ale logo. A six-wheeled tanker wagon that is the ideal model for an adult's model railway layout or a gift for someone who loves an ale! - OO Scale

Hornby Moor Brewery 'Bitter' Tanker Wagon

Moor Brewery 'Bitter' Tanker Wagon Celebrate Kent’s brewing excellence with this finely detailed Hornby model of the Moor Brewery tanker. Featuring the bold ‘Bitter’ logo, it makes a striking addition to any OO gauge railway or collector’s display. - OO Scale

Hornby Gadds Brewery 'No3' Tanker Wagon

Gadds Brewery 'No3' Tanker Wagon Celebrate the rich brewing heritage of Kent with this exquisitely detailed Hornby model of the Ramsgate Brewery tanker. Featuring the distinctive Gadd No.3 logo, it's a must-have for collectors and beer enthusiasts alike. - OO Scale

Hornby TTA Class A Tank BRT 57502 Amoco

TTA Class A Tank BRT 57502 Amoco The TTA tank wagons were introduced by BR in the 1960s, with 1,000s built to replace ageing tank wagons of smaller capacity that it had inherited from private-owner fleets. Used to transport oil and petroleum products, they were still being built into the 1970s, with the last remaining in service until the early 2000s.  This highly detailed scale model represents one of the Amoco fleet, which became a common sight in the 1990s. - OO Scale

Hornby ZCV 'CLAM' DB973347 Dutch Departmental EWS

ZCV 'CLAM' DB973347 Dutch Departmental EWS These wagons were introduced into BR service in 1989 and utilised redundant MGR hopper wagon chassis, with new, low-sided steel bodies. ‘Clam’ wagons were used in engineering and permanent way trains for carrying ballast, spoil and sleepers. They had fixed sides and ends and were fitted with vacuum brakes. A total of 400 were built and they were given the TOPS code ‘ZCV’.  This highly detailed CLAM Wagon model makes a delightful addition to your freight model railway. - OO Scale

Hornby ZCV 'TOPE' DB970569 Dutch Departmental Transrail

ZCV 'TOPE' DB970569 Dutch Departmental Transrail Also classified ‘ZCV’ or ‘ZDV’ under the TOPS scheme were ‘Tope’ wagons. Introduced in 1988, they were rebuilt from MGR hopper wagon, but had cut-down and welded hopper wagon bodies with a simplified side-bracing. Mainly used for carrying ballast and for spoil disposal in departmental trains, 856 conversions had been completed by the time the last was turned out in 1991.  This highly detailed TOPE Wagon model makes a delightful addition to your freight model railway. - OO Scale

Hornby The Beatles: 'Hard Days Night' US Album Wagon

The Beatles: 'Hard Days Night' US Album Wagon Celebrate the Fab Four with the Hornby ‘Hard Day’s Night’ US Album Wagon. Featuring bold, eye-catching artwork from the legendary album, this OO gauge wagon brings a pop of 1960s energy to any layout. A perfect gift for Beatles fans and collectors, it adds character and vibrancy to your model railway while paying tribute to one of the band’s most famous releases. - OO Scale

Hornby The Beatles: 'Please Please Me' UK Album Wagon

The Beatles: 'Please Please Me' UK Album Wagon Celebrate the start of Beatlemania with the Hornby ‘Please Please Me’ UK Album Wagon.  Featuring vibrant livery inspired by The Beatles’ debut album, this OO gauge wagon brings a classic piece of music history to your layout. Expertly crafted with attention to detail, it’s perfect for Beatles fans, collectors, and model railway enthusiasts alike. - OO Scale

Hornby 2026 Christmas Wagon

2026 Christmas Wagon Add a touch of holiday magic to your model railway with the Hornby 2026 Christmas Wagon. Featuring a vibrant blue livery and stacked with festive presents, this charming wagon brings seasonal cheer to any layout, or makes a delightful display under the tree. Make your collection merry this Christmas! - OO Scale

2026 Hornby Wagon

2026 Hornby Wagon Celebrate the year ahead with this striking limited-edition Hornby 2026 Hopper Wagon, finished in a bold, eye-catching red livery. The clean, modern styling is complemented by the crisp ‘2026’ branding along the body sides, making it a standout addition to any layout or collector’s display. - OO Scale

Hornby BR Mk3 TS 42175 Virgin West Coast

BR Mk3 TS 42175 Virgin West Coast British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby BR Mk3 TF 41045 Virgin West Coast

BR Mk3 TF 41045 Virgin West Coast  British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby BR Mk3 TGS 44081 Virgin West Coast

BR Mk3 TGS 44081 Virgin West Coast  British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby BR Mk3 TRSB 40437 Virgin West Coast

BR Mk3 TRSB 40437 Virgin West Coast British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby BR Mk1 TSO W3817 BR Lined Maroon (WR)

BR Mk1 TSO W3817 BR Lined Maroon (WR)  The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 SK E24453 BR Lined Maroon (ER)

BR Mk1 SK E24453 BR Lined Maroon (ER) The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 SK M24404 BR Lined Maroon (LM)

BR Mk1 SK M24404 BR Lined Maroon (LM)  The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 SK S24314 BR Southern Green (SR)

BR Mk1 SK S24314 BR Southern Green (SR)  The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 SK W24371 BR Lined Maroon (WR)

BR Mk1 SK W24371 BR Lined Maroon (WR)  The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 TSO E4050 BR Lined Maroon (ER)

BR Mk1 TSO E4050 BR Lined Maroon (ER)  The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 TSO M3764 BR Lined Maroon (LM)

BR Mk1 TSO M3764 BR Lined Maroon (LM)  The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 TSO S3827 BR Southern Green (SR)

BR Mk1 TSO S3827 BR Southern Green (SR) The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 CK S15036 BR Southern Green (SR)

BR Mk1 CK S15036 BR Southern Green (SR)  The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 CK W15114 BR Lined Maroon (WR)

BR Mk1 CK W15114 BR Lined Maroon (WR)  The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 CK E15276 BR Lined Maroon (ER)

BR Mk1 CK E15276 BR Lined Maroon (ER) The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 CK M15374 BR Lined Maroon (LM)

BR Mk1 CK M15374 BR Lined Maroon (LM)  The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 BSK E34740 BR Lined Maroon (ER)

BR Mk1 BSK E34740 BR Lined Maroon (ER)  The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 BSK M35125 BR Lined Maroon (LM)

BR Mk1 BSK M35125 BR Lined Maroon (LM) The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 BSK S34257 BR Southern Green (SR)

BR Mk1 BSK S34257 BR Southern Green (SR)  The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby BR Mk1 BSK W34897 BR Lined Maroon (WR)

BR Mk1 BSK W34897 BR Lined Maroon (WR) The Mk1 was BR’s first standardised design of railway carriage with thousands built across BR’s carriage works in Derby, Wolverton, Doncaster, York, Eastleigh, and Swindon between 1951 and 1963. The design was also used on first generation Diesel Multiple Units (DMUs) until 1974 and for non-passenger stock such as parcel vans and full brake vehicles. The new coaches gradually replaced older designs inherited from the ‘Big Four’ at nationalisation in 1968 and were used on all British Railways regions. The standard underframe length was 63ft 5in (19.33m) with gangwayed bodies 64ft 6in (19.7m), though suburban coaches and parcel vans were shorter. Coaches were either fully open or were corridor coaches with seating compartments. Bodywork was of steel panels on wooden frames, with a separate underframe consisting of heavy steel sections braced with steel trusses, originally mounted on ‘BR1’ bogies, though these were superseded by a new cast-steel design from 1958 known as the ‘Commonwealth’ bogie. Later examples utilised a Swindon-designed ‘B4’ bogie which gave a much-improved ride and was adopted for use on Southern Region Mk1 Electric Multiple Units (EMUs). - OO Scale

Hornby TTA Class A Tank Amoco Triple Pack

TTA Class A Tank Amoco Triple Pack BRT 57484, BRT 57485 and BRT 57486. Amoco was founded in American in 1889 by the Standard Oil Company. During the 1990s, it merged with BP and was owned by the British company from 1998. As a result, it was common to see these wagons coupled to BP-branded wagons.  This model wagon Triple Pack offers a good way to increase the size of your ‘TTA’ tanker train, with each wagon having a different running number; BRT 57484, BRT 57485 and BRT 57486. - OO Scale

Hornby 21T Hopper Grimethorpe Coalite Triple Pack

21T Hopper Grimethorpe Coalite Triple Pack 206, 210 and 640. Grimethorpe Colliery was part of a large and highly productive Coalite facility near Barnsley in South Yorkshire. Coalite was a type of low-temperature coke used as smokeless fuel. Wagons such as these were used on the internal rail system and in coal trains. The colliery closed in 1993 and the Coalite plant closed the following year.  Each highly detailed scale model in this 21T Hopper Wagon Triple Pack has a different running number: 206, 210 and 640. - OO Scale

Hornby Tavern Coach Pack 'At the Sign of the Three Plovers'

BR Kitchen and Buttery Car & Composite Restaurant 'At the Sign of the Three Plovers' Coach Pack  This highly detailed OO gauge model coach pack represents one of eight pairs of vehicles introduced by BR in 1949 to provide catering facilities with a difference.  The idea came from Oliver Bulleid, the former Southern Railway’s Chief Mechanical Engineer. This pair operated on the Eastern Region and consisted of a Composite Dining Car and a ‘Tavern Coach’. Internally, each ‘tavern’ was decorated to mimic an olde English pub, with tiled floor, whitewashed walls, ‘oak’ beams, high-backed settles and illuminated by ‘lanterns’. - OO Scale

Hornby BR Mk3 Virgin West Coast 4 Car Coach Pack

BR Mk3 Virgin West Coast 4 Car Coach Pack  Includes: Trailer Standard 42176 Trailer Standard 42177 Trailer Standard 42105 Trailer First 41059 British Rail introduced the production version of the Mk3 coach in 1975 with improved standards of comfort in response to competition from airlines and increased use of private motor cars. Designed and built by BREL, they were initially intended as locomotive-hauled stock, but with the development of the High Speed Train (HST), were soon adapted for use at speeds of up to 125mph (220km/h). The first version of the Mk3 coach had actually been built in 1972, with ten coaches produced for the prototype HST. Mk3 coaches continued to be built until 1988, but multiple units based on the Mk3 body shell were built until the early 1990s. The standard length of a Mk3 coach is 75ft (23m), which is ten feet longer than its predecessor, the Mk2, and is of monocoque construction with an all-welded mild steel stressed skin. Virgin operated several sets of these coaches for use with its HST power cars. Following introduction of its Pendolinos, most of Virgin’s Mk3 coaches moved on to other operators, though it did retain one set for peak time cover and had them refurbished at Doncaster and painted into the same livery as its Pendolino and Voyager trains. However, these too were stood-down in November 2014 when they were transferred to Abellio Greater Anglia. - OO Scale

Hornby Railroad: Class 66 66022 'Lafarge Charnwood' EWS

Railroad: Class 66 66022 'Lafarge Charnwood' EWS Entering service in 1998, this was one of the original 250 locomotives ordered for EWS.  Funded by Locomotion Capital Ltd, it was leased to EWS until December 2008. No. 66022 was one of 60 locomotives sub-let to its Euro Cargo Rail subsidiary in France, starting in June 2006. It was then sold by to Angel Trains, who leased it to DB Schenker Rail UK, but the locomotive remained in service in France, returning to the UK for heavy maintenance when required via the Channel Tunnel. Today it is part of the DB Cargo fleet.  Our RailRoad model faithfully replicates this Class 66 locomotive, with an emphasis on durability for regular model railway use. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 66 66022 'Lafarge Charnwood' EWS (Sound Fitted)

Railroad: Class 66 66022 'Lafarge Charnwood' EWS (Sound Fitted) Entering service in 1998, this was one of the original 250 locomotives ordered for EWS. Funded by Locomotion Capital Ltd, it was leased to EWS until December 2008.  No. 66022 was one of 60 locomotives sub-let to its Euro Cargo Rail subsidiary in France, starting in June 2006. It was then sold to Angel Trains, who leased it to DB Schenker Rail UK, but the locomotive remained in service in France, returning to the UK for heavy maintenance when required via the Channel Tunnel. Today it is part of the DB Cargo fleet.  Our RailRoad replica model is a faithful representation of the Class 66 locomotive, with added durability and pre-fitted with a DCC sound chip for extra authenticity. - OO Scale

Hornby Railroad: Class 66 66601 Freightliner 60th Green

Railroad: Class 66 66601 Freightliner 60th Green First introduced in 1998, the Class 66 revolutionised the rail freight sector in Britain and have become the most prolific type for heavy freight work. In 2000, a new 66/6 sub-class was created with a lower gear ratio version enabling heavier trains to be hauled, albeit at slower speeds.  A total of 25 were put into service by Freightliner, numbered 66601-625 and some of these have since moved overseas for use with Freightliner Poland. Used mainly on oil, aggregate, and cement trains, 66601 is one of 22 still operating in the UK and, on 18th March 2025, was turned out at Eastleigh Works in a new green ‘Freightliner 60’ livery.  We've faithfully recreated this locomotive in RailRoad model form, keeping plenty of detail but incorporating more durable features, making it ideal for a busy model railway layout. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 66 66601 Freightliner 60th Green (Sound Fitted)

Railroad: Class 66 66601 Freightliner 60th Green (Sound Fitted) First introduced in 1998, the Class 66 revolutionised the rail freight sector in Britain and have become the most prolific type for heavy freight work.  In 2000, a new 66/6 sub-class was created with a lower gear ratio version enabling heavier trains to be hauled, albeit at slower speeds. A total of 25 were put into service by Freightliner, numbered 66601-625 and some of these have since moved overseas for use with Freightliner Poland.  Used mainly on oil, aggregate, and cement trains, 66601 is one of 22 still operating in the UK and, on 18th March 2025, was turned out at Eastleigh Works in a new green ‘Freightliner 60’ livery.  We've faithfully recreated this locomotive in RailRoad model form, keeping plenty of detail but incorporating more durable features, making it ideal for a busy model railway layout. Plus, this locomotive model has been pre-fitted with a DCC sound chip for the most authentic experience. - OO Scale

Hornby Railroad: Class 66 66790 'Louise' GBRf/Colas

Railroad: Class 66 66790 'Louise' GBRf/Colas This RailRoad model locomotive represents one of three EMD Class 66s imported by Beacon Rail from Sweden that were converted for use on Network Rail at EMD Longport and designated as part of the Class 66/7 subclass.  On long-term lease to operator GBRF, 66790 is currently working under agreement for Colas Rail. The locomotive was named ‘Louise’ after Louise Garwood at Ipswich on 16 July 2023, as part of GB Railfreight’s annual ladies naming ceremony.  Our RailRoad models combine high detail with added durability, making them ideal for beginners, younger modellers, or those who spend a lot of time on their model railway hobby. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 66 66790 'Louise' GBRf/Colas (Sound Fitted)

Railroad: Class 66 66790 'Louise' GBRf/Colas (Sound Fitted) This model locomotive represents one of three EMD Class 66s imported by Beacon Rail from Sweden that were converted for use on Network Rail at EMD Longport and designated as part of the Class 66/7 subclass.  On long-term lease to operator GBRF, 66790 is currently working under agreement for Colas Rail. The locomotive was named ‘Louise’ after Louise Garwood at Ipswich on 16 July 2023, as part of GB Railfreight’s annual ladies naming ceremony.  Our RailRoad models combine high detail with added durability, making them ideal for beginners, younger modellers, or those who spend a lot of time on their model railway hobby. And this one is pre-fitted with a DCC sound chip for extra authenticity. - OO Scale

Hornby Railroad: BR Class 60 60038 'Avesta Polarit' EWS (Sound Fitted)

Railroad: BR Class 60 60038 'Avesta Polarit' EWS (Sound Fitted) A growth in demand in the heavy haulage sector led to a review of BR’s available motive power in the 1980s. With 185 locomotives of the Type 5, 3,000+ horsepower category available, made up of its Classes 56 and 58, it was clear that more would be needed, and BR put out an invitation to tender for new locomotives in 1987.  The 100 locomotive order was awarded to Brush in Loughborough, and these entered service between 1989 and 1993. No.60038 was named ‘Bidean nam Bian’ after the Scottish ‘Munro’ in Glen Coe.  With BR’s trainload freight business broken up into shadow franchises, the locomotive became part of Loadhaul, based in the north-east. By 1996, this had become part of EWS and 60038 was named 'Avesta Polarit' after the steel making company at the DFDS Immingham sea terminal on 19th March 2002. It is now one of 14 owned by DC Rail and currently in store.  Our detailed RailRoad replica Class 60 model retains all the charm of the original, with enhanced durability and pre-fitted DCC sound features. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60039 'Dove Holes' DB Cargo

Railroad: BR Class 60 60039 'Dove Holes' DB Cargo  Entering service at Cardiff Canton in 1991, 60039 was originally named ‘Glastonbury Tor’ as part of the hills and peaks theme of the initial Class 60 naming convention.  It was later one of the locomotives selected for the ‘Super 60’ upgrade programme announced by DBS/DB Cargo in November 2010 that was designed to extend their working life by a further 15 years. No.60039 was named ‘Dove Holes’ in April 2015 and was used on limestone traffic out of Derbyshire. It is still owned by DB Cargo and is one of 52 members of the class put into storage by the company.  We've recreated this impressive locomotive in RailRoad form, bringing the most important details to life and adding features to enhance durability, making this the perfect model for regular layout use. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 60 60039 'Dove Holes' DB Cargo (Sound Fitted)

Railroad: BR Class 60 60039 'Dove Holes' DB Cargo (Sound Fitted)  Entering service at Cardiff Canton in 1991, 60039 was originally named ‘Glastonbury Tor’ as part of the hills and peaks theme of the initial Class 60 naming convention.  It was later one of the locomotives selected for the ‘Super 60’ upgrade programme announced by DBS/DB Cargo in November 2010 that was designed to extend their working life by a further 15 years. No.60039 was named ‘Dove Holes’ in April 2015 and was used on limestone traffic out of Derbyshire. It is still owned by DB Cargo and is one of 52 members of the class put into storage by the company.  We've recreated this impressive locomotive in RailRoad form, bringing the most important details to life and adding features to enhance durability, making this the perfect model for regular layout use. We've even included a pre-fitted sound chip so you can play authentic railway sounds as the model moves around your layout. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60069 'Humphrey Davy' (Sound Fitted)

Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector (Sound Fitted)  The Class 60s were the last heavy haulers built for BR. No.60069 was allocated to BR’s Train Load Freight (TLF) Coal Sector and named ‘Humphrey Davy’, in honour of the inventor of the miner’s safety lamp.  Following the break-up of TLF, the Class 60s were divided between three of the shadow franchises: Mainline Freight, Loadhaul, and Transrail Freight, but not long after they were formed they were absorbed into English, Welsh & Scottish (EWS). By 2007, it was estimated that the operational fleet was down to just 60 locomotives, the rest either in store or undergoing repair. That year, EWS was acquired by DB Schenker, a wholly-owned subsidiary of German railway company, Deutche Bahn.  Our RailRoad Class 60 model represents 'Humphrey Davy' in detail, but with added features that make for a much more durable locomotive. Plus, it is pre-fitted with a DCC sound chip for the most authentic model railway experience. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector

Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector The Class 60s were the last heavy haulers built for BR. No.60069 was allocated to BR’s Train Load Freight (TLF) Coal Sector and named ‘Humphrey Davy’, in honour of the inventor of the miner’s safety lamp.  Following the break-up of TLF, the Class 60s were divided between three of the shadow franchises: Mainline Freight, Loadhaul and Transrail Freight, but not long after they were formed they were absorbed into English, Welsh & Scottish (EWS). By 2007, it was estimated that the operational fleet was down to just 60 locomotives, the rest either in store or undergoing repair. That year, EWS was acquired by DB Schenker, a wholly-owned subsidiary of German railway company, Deutche Bahn.  Our RailRoad Class 60 model represents 'Humphrey Davy' in detail, but with added features that make for a much more durable locomotive. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 90 90001 'Royal Scot' LSL Intercity

Railroad: BR Class 90 90001 'Royal Scot' LSL Intercity  As the first member of class (originally to be designated Class 87/2 as the locomotives were seen as an upgraded version of the existing Class 87s), 90001 initially went to the Rail Technical Centre at Derby for testing in October 1987.  It entered service at Willesden depot in October 1987 and, in 1989, was named ‘BBC Midlands Today’. That name was removed in 2004 and, ten years later, it was given the name ‘Crown Point’ while based at Norwich with Abellio Greater Anglia. In April 2020, it was bought by Locomotive Services Limited, Crewe for main line excursion work. They repainted it in the original InterCity ‘Swallow’ livery and renamed it ‘Royal Scot’. It is one of three Class 90s currently owned by LSL, the others being 90002 and 90026.  This RailRoad locomotive model is a faithful representation of the electric engine, but with more durable features that make it perfect for regular model railway running. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 90 90001 'Royal Scot' LSL Intercity (Sound)

Railroad: BR Class 90 90001 'Royal Scot' LSL Intercity (Sound Fitted) As the first member of class (originally to be designated Class 87/2 as the locomotives were seen as an upgraded version of the existing Class 87s), 90001 initially went to the Rail Technical Centre at Derby for testing in October 1987.  It entered service at Willesden depot in October 1987 and, in 1989, was named ‘BBC Midlands Today’. That name was removed in 2004 and, ten years later, it was given the name ‘Crown Point’ while based at Norwich with Abellio Greater Anglia.  In April 2020, it was bought by Locomotive Services Limited, Crewe for main line excursion work. They repainted it in its original InterCity ‘Swallow’ livery and renamed it ‘Royal Scot’. It is one of three Class 90s currently owned by LSL, the others being 90002 and 90026.  This RailRoad model brings the locomotive to life in OO scale form, but with more durable features than found on our main range. It is also pre-fitted with a DCC sound chip, for the most authentic model railway experience. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 90 90020 'Collingwood' EWS

Railroad: BR Class 90 90020 'Collingwood' EWS The Class 90 is a type of locomotive designed for mixed traffic work on the 25kV AC overhead network as replacements for aging electrics such as the Classes 81, 82, 83, 84 and 85 that dated back to the 1960s.  Between 1987 and 1990, 50 examples were built at BREL Crewe and put into traffic on the West Coast Main Line during the latter years of British Rail and were equally at home on freight as they were on passenger traffic. Following privatisation of BR, the type served with various operators, such as Abellio Greater Anglia, Virgin Trains West Coast, GNER, and freight operators Freightliner and EWS.  This RailRoad locomotive model of 90020 is depicted during its time as part of the EWS fleet when named ‘Collingwood’, in a striking red and yellow livery. The original locomotive is currently in short-term storage for potential further use by DB Cargo. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 90 90020 'Collingwood' EWS (Sound Fitted)

Railroad: BR Class 90 90020 'Collingwood' EWS (Sound Fitted) The Class 90 is a type of locomotive designed for mixed traffic work on the 25kV AC overhead network as replacements for aging electrics such as the Classes 81, 82, 83, 84 and 85 that dated back to the 1960s.  Between 1987 and 1990, 50 examples were built at BREL Crewe and put into traffic on the West Coast Main Line during the latter years of British Rail and were equally at home on freight and passenger traffic. Following privatisation of BR, the type served with various operators, such as Abellio Greater Anglia, Virgin Trains West Coast, GNER, and freight operators Freightliner and EWS.  This RailRoad locomotive model of 90020 is depicted during its time as part of the EWS fleet when named ‘Collingwood’. Sporting a striking red and yellow livery, this model is DCC sound fitted, for an extra authentic touch. The original locomotive is currently in short-term storage for potential further use by DB Cargo. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 91 91018 'Robert Louis Stevenson' (Sound)

Railroad: BR Class 91 91018 'Robert Louis Stevenson' Intercity (Sound Fitted)  A total of 31 Class 91s were built between 1988 and 1991 for high-speed express passenger train haulage as part of the East Coast electrification programme of the late 1980s. Also known as InterCity 225s in anticipation of their service speed of 225km/h (140mph), they were also referred to as ‘Electras’ by BR during their development phase.  No. 91018 was built at BREL Crewe and entered service in 1990. It received the name ‘Robert Louis Stevenson’ in November 1993, and this was changed to ‘Bradford Film Festival’ in February 2000. It was modified to Class 91/1 in 2002 and renumbered 91118, and remained in service until withdrawn by LNER in May 2020, before going into storage. It was scrapped by February 2023.  Bringing RailRoad detail and durability to the iconic design, this OO gauge model locomotive also features pre-fitted sound. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 91 91018 'Robert Louis Stevenson' Intercity

Railroad: BR Class 91 91018 'Robert Louis Stevenson' Intercity A total of 31 Class 91s were built between 1988 and 1991 for high-speed express passenger train haulage as part of the East Coast electrification programme of the late 1980s. Also known as InterCity 225s in anticipation of their service speed of 225km/h (140mph), they were also referred to as ‘Electras’ by BR during their development phase.  No. 91018 was built at BREL Crewe and entered service in 1990. It received the name ‘Robert Louis Stevenson’ in November 1993, and this was changed to ‘Bradford Film Festival’ in February 2000. It was modified to Class 91/1 in 2002 and renumbered 91118, and remained in service until withdrawn by LNER in May 2020, before going into storage. It was scrapped by February 2023.  This RailRoad model locomotive is a faithful representation of the BR Intercity Class 91 'Robert Louis Stevenson', with a more durable construction that makes it perfect for beginner modellers. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG BS

Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG British Steel Blue Built by English Electric at its Vulcan Foundry in Lancashire, the locomotive this RailRoad model is based on started life in January 1961 as D6705, going new to Stratford depot in London.  After becoming 37005 under TOPS, it was rebuilt as a Class 37/5 in April 1985, which included replacing its EE generator with a new Brush unit, and a complete re-wire, with a consequent renumbering to 37501. It was then painted into its distinctive British Steel pale blue colour scheme, gaining Thornaby Kingfisher motif and British Steel logos. It was then named ‘Teesside Steelmaster’ in 1987.  It was later modified for the proposed Channel Tunnel sleeper ‘Nightstar’ project (which was later aborted) to become a 37/6 in February 1995 and renumbered to 37601. It is currently one of six Class 37s leased by Rail Operations Group from Europhoenix for contracted movement of passenger stock, including EMUs. It was returned to its 1987 guise during a repaint in 2025.  This RailRoad model locomotive is a durable design, perfect for model railway beginners, younger enthusiasts, or anyone who enjoys running their trains daily. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 37 37501 'Teesside Steelmaster'(Sound Fitted)

Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG British Steel Blue (Sound Fitted) Built by English Electric at its Vulcan Foundry in Lancashire, the locomotive this RailRoad model is based on started life in January 1961 as D6705, going new to Stratford depot in London.  After becoming 37005 under TOPS, it was rebuilt as a Class 37/5 in April 1985, which included replacing its EE generator with a new Brush unit, and a complete re-wire, with a consequent renumbering to 37501. It was then painted into its distinctive British Steel pale blue colour scheme, gaining Thornaby Kingfisher motif and British Steel logos. It was then named ‘Teesside Steelmaster’ in 1987.  It was later modified for the proposed Channel Tunnel sleeper ‘Nightstar’ project (which was later aborted) to become a 37/6 in February 1995 and renumbered to 37601. It is currently one of six Class 37s leased by Rail Operations Group from Europhoenix for contracted movement of passenger stock, including EMUs. It was returned to its 1987 guise during a repaint in 2025.  This RailRoad model locomotive is a durable design, perfect for model railway beginners, younger enthusiasts, or anyone who enjoys running their trains daily. Plus, it has been pre-fitted with a DCC sound chip for HM7000 control. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 47 47749 'Atlantic Collage' RES

Railroad: BR Class 47 47749 'Atlantic Collage' RES This OO gauge model locomotive represents a Class 47 example that emerged from Crewe Works in February 1965 as D1660.  It was allocated to Swansea’s Landore MPD, before being named ‘City of Truro’ at Truro station in June that year. It became 47076 under TOPs, then was reclassified as a 47/4 in November 1984, when it became 47625. In the 1990s, it became part of the RES pool for operating mail and parcels trains and, in November 1995, was modified to 47/7b, with longer-range fuel tanks and equipment for operating with a propelling control vehicle (PCV). It was given the number 47749 and named ‘Atlantic College’. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 47 47787 'Windsor Castle' EWS

Railroad: BR Class 47 47787 'Windsor Castle' EWS Built by Brush, this locomotive started life as D1757 in September 1964 at Cardiff Canton, and, under TOPS, became 47163 in 1974.  It received various modifications between 1976 and 1979 and was reclassified as a 47/4 and renumbered 47610 in April 1984. It was renumbered and again in April 1989, when it became a 47/8 and was given the number 47823, before becoming 47787 as part of the EWS fleet and being named ‘Windsor Castle’. Previously, it had carried the names ‘SS Great Britain' and ‘Victim Support’. It became part of the West Coast Railways operation at Carnforth in February 2007.  Our Class 47 RailRoad model faithfully depicts this locomotive in its EWS form, with added features for enhanced durability. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 47 47787 'Windsor Castle' EWS (Sound Fitted)

Railroad: BR Class 47 47787 'Windsor Castle' EWS (Sound Fitted) Built by Brush, this locomotive started life as D1757 in September 1964 at Cardiff Canton, and under TOPS became 47163 in 1974.  It received various modifications between 1976 and 1979 and was reclassified as a 47/4 and renumbered 47610 in April 1984. It was renumbered again in April 1989, when it became a 47/8 and was given the number 47823, before becoming 47787 as part of the EWS fleet and being named ‘Windsor Castle’. Previously, it had carried the names ‘SS Great Britain' and ‘Victim Support’. It became part of the West Coast Railways operation at Carnforth in February 2007.  Our Class 47 RailRoad model faithfully depicts this locomotive in its EWS form, with added features for enhanced durability and a pre-fitted sound chip for authentic railway sounds. - DCC Sound Fitted (HM7000) - OO Scale

Hornby Railroad: BR Class 60 60038 'Avesta Polarit' EWS

Railroad: BR Class 60 60038 'Avesta Polarit' EWS  A growth in demand in the heavy haulage sector led to a review of BR’s available motive power in the 1980s.  With 185 locomotives of the Type 5, 3,000+ horsepower category available, made up of its Classes 56 and 58, it was clear that more would be needed, and BR put out an invitation to tender for new locomotives in 1987. The 100 locomotive order was awarded to Brush in Loughborough, and these entered service between 1989 and 1993. No.60038 was named ‘Bidean nam Bian’ after the Scottish ‘Munro’ in Glen Coe.  With BR’s trainload freight business broken up into shadow franchises, the locomotive became part of Loadhaul, based in the north-east. By 1996, this had become part of EWS and 60038 was named 'Avesta Polarit' after the steel making company, at the DFDS Immingham sea terminal on 19th March 2002. It is now one of 14 owned by DC Rail and currently in store.  Our RailRoad model is an accurate replica of this Class 60 locomotive, with high detail and design features for enhanced durability. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 08 08256 BR Blue (Sound Fitted)

Railroad: BR Class 08 08256 BR Blue (Sound Fitted) A total of 996 of the diesel electric shunters were built at various BR works between 1952 and 1962. As the standard BR general-purpose diesel shunter, the type became a common sight at major stations and freight yards across the country.  The locomotive this example is based on started life as 13326 in November 1956, having been completed at Darlington, and was new to New England, Peterborough. It later served at Sheffield Darnall, Tinsley, Finsbury Park, Hitchin, Startford and finally, from May 1968 at Colchester, from where it was withdrawn in February 1984. It was cut-up at Doncaster Works by January the following year.  Our RailRoad range is more durable than our standard range, making it perfect for beginners, children, and the most enthusiastic of model railway runners. Plus, it's been pre-fitted with a DCC sound chip for HM700 control. - DCC Sound Fitted (HM7000) - OO Scale

Hornby Railroad: BR Class 37 37422 'Pegasus' Swietelsky (Sound Fitted)

Railroad: BR Class 37 37422 'Pegasus' Swietelsky Rail Services (Sound Fitted)  Originally new from Vulcan Foundry in February 1965 as D6966, the locomotive this RailRoad model is based on became 37266 under the TOPS numbering system in 1974.  Its career started at Tinsley, Sheffield and it also had postings at Stratford and Landore under BR. In January 1986 it was reclassified to 37/4 and renumbered 37422. The locomotive has worn several liveries and had several different operators, including EWS, DB Schenker, and DRS. It became part of the Harry Needle Railroad Company spot hire fleet based at Barrow Hill, which was taken over by Swietelsky, an Austrian-based railway construction and maintenance contractor, in January 2025. The locomotive was named ‘Pegasus’ later the same year.  This OO gauge locomotive version is pre-fitted with a sound chip for the most authentic model railway experience. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 08 08256 BR Blue

Railroad: BR Class 08 08256 BR Blue A total of 996 of the diesel electric shunters were built at various BR works between 1952 and 1962. As the standard BR general-purpose diesel shunter, the type became a common sight at major stations and freight yards across the country.  The locomotive this model example is based on started life as 13326 in November 1956, having been completed at Darlington, and was new to New England, Peterborough. It later served at Sheffield Darnall, Tinsley, Finsbury Park, Hitchin, Startford and finally, from May 1968 at Colchester, from where it was withdrawn in February 1984. It was cut-up at Doncaster Works by January the following year.  Our RailRoad range is more durable than our standard range, making it perfect for beginners, children, and the most enthusiastic of model railway runners. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 3F 'Jinty' Hart and Weaver Limited No.5

Railroad: Class 3F 'Jinty' Hart and Weaver Limited No.5 The LMS ‘Jinties’ were used widely for shunting and station pilot duties and were so versatile, they were even capable of running at speeds of up to 60mph. When the first diesel shunters started to be introduced, surplus ‘Jinties’ were sold to industrial users and some received bright liveries, such as this fictitious, but highly attractive, blue ‘Hart & Weaver’ livery.  This OO gauge RailRoad model of "Jinty" No.5 is perfect for shunting your industrial sidings. - DCC Ready 6-Pin Socket - OO Scale

Hornby Railroad: GWR County 1013 'County of Dorset' BR Lined Green

Railroad: GWR County 1013 'County of Dorset' BR Lined Green  The ‘County’ Class was the last of the GWR-designed two-cylinder 4-6-0s, with 30 built at Swindon between 1945 and 1947 to the design of Chief Mechanical Engineer, Frederick Hawksworth.  ‘County of Dorset’ entered service in February 1946 and spent most of its early years in the West Country at Bristol, Plymouth, Truro and Penzance, before transferring to Shrewsbury in December 1951. Its final move was to Swindon in September 1963, from where it was withdrawn in July the following year and scrapped at Cashmore’s yard in Newport, South Wales.  Our OO gauge RailRoad replica model locomotive is a detailed, yet durable, version of the Country Class, bringing the 'County of Dorset' to your model railway collection. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 8 71000 'Duke of Gloucester' (Sound Fitted)

Railroad: BR Class 8 71000 'Duke of Gloucester' BR Lined Green (Sound Fitted) Built as the replacement for ‘Princess Royal’ Class 4-6-2 46202 ‘Princess Anne’, which was destroyed in the Harrow and Wealdstone rail disaster of 1952, the Riddles-designed ‘Pacific’ was intended as the first of a new batch of modern locomotives that would serve BR for many years to come.  Completed at Crewe in 1954, plans to build more were turned down by the Railway Executive because the design was too expensive and complex. As a result, ‘Duke of Gloucester’ remained unique, with its three-cylinder configuration and Caprotti rotary cam-driven valve gear. It had an operational life of just eight years, being withdrawn in 1962.  One of its cylinders was saved for display in the National Railway Museum, while the other was removed to balance the locomotive before going for scrap in South Wales. It was, however, saved in 1974 and a restoration lasting 13 years ensued, including building new cylinders from scratch. When it returned to steam it became a regular on the main line and, during 2025, returned from its latest overhaul, once again hauling steam specials to the delight of enthusiasts.  This model locomotive replica of the Class 08 'Duke of Gloucester' beautifully emulates this famous machine and is pre-fitted with HM7000 sound. - DCC HM7000 TXS Sound Fitted - OO Scale  

Hornby Railroad: BR Class 8 71000 'Duke of Gloucester' BR Lined Green

Railroad: BR Class 8 71000 'Duke of Gloucester' BR Lined Green Built as the replacement for ‘Princess Royal’ Class 4-6-2 46202 ‘Princess Anne’, which was destroyed in the Harrow and Wealdstone rail disaster of 1952, the Riddles-designed ‘Pacific’ was intended as the first of a new batch of modern locomotives that would serve BR for many years to come.  Completed at Crewe in 1954, plans to build more were turned down by the Railway Executive because the design was too expensive and complex. As a result, ‘Duke of Gloucester’ remained unique, with its three-cylinder configuration and Caprotti rotary cam-driven valve gear. It had an operational life of just eight years, being withdrawn in 1962. One of its cylinders was saved for display in the National Railway Museum, while the other was removed to balance the locomotive before going for scrap in South Wales.  It was, however, saved in 1974 and a restoration lasting 13 years ensued, including building new cylinders from scratch. When it returned to steam it became a regular on the main line and during 2025 returned from its latest overhaul, once again hauling steam specials to the delight of enthusiasts.  Bring the spirit of 'Duke of Gloucester' back to life with this OO gauge Class 08 RailRoad model locomotive. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER 'West Riding Limited' Double Open First Pack

LNER 'West Riding Limited' Double Open First Pack Following the success of the LNER’s newly-introduced ‘Coronation’ trains in 1935, a new train was introduced to operate between London King’s Cross and Leeds and Bradford in 1937. A new set of carriages was built that was identical to the ‘Coronation’ with four twin articulated coaches, though not the streamlined beavertail observation car, named the ‘West Riding Limited’. Carriages were in pairs, sharing a bogie between the two, thus reducing friction and improving ride quality. The train first ran on 27th September 1937 and achieved an average speed of 63.3mph (101.9km/h) between King’s Cross and Bradford. It was hauled by Gresley's ‘A4’ No. 4492 ‘Dominion of New Zealand’, which had emerged from Doncaster Works only three months earlier. Services were suspended for the duration of the Second World War, but were reinstated in 1949. A modern version of the train is still operated by the present-day LNER with a 6.30am departure from Bradford Forster Square station. The next vehicles in the rake are coaches ‘C’ and ‘D’ and these comprise of two identical first class open coaches which offered enhanced comfort and also had a lavatory at each end. Those coaches are the ones presented in this highly detailed OO gauge coach pack. - OO Scale

Hornby LNER 'West Riding Limited' Open Third & Brake Third Pack

LNER 'West Riding Limited' Open Third & Brake Third Pack Following the success of the LNER’s newly-introduced ‘Coronation’ trains in 1935, a new train was introduced to operate between London King’s Cross and Leeds and Bradford in 1937. A new set of carriages was built that was identical to the ‘Coronation’ with four twin articulated coaches, though not the streamlined beavertail observation car, named the ‘West Riding Limited’. Carriages were in pairs, sharing a bogie between the two, thus reducing friction and improving ride quality. The train first ran on 27th September 1937 and achieved an average speed of 63.3mph (101.9km/h) between King’s Cross and Bradford. It was hauled by Gresley's ‘A4’ No. 4492 ‘Dominion of New Zealand’, which had emerged from Doncaster Works only three months earlier. Services were suspended for the duration of the Second World War, but were reinstated in 1949. A modern version of the train is still operated by the present-day LNER with a 6.30am departure from Bradford Forster Square station. The final pair are made up of an open third class coach with lavatory, plus another third class brake coach with alternative accommodation for the train’s guard, and those are the highly detailed OO gauge model coaches shown in this pack. - OO Scale

Hornby LNER 'West Riding Limited' Open Third & Kitchen Third Pack

LNER 'West Riding Limited' Open Third & Kitchen Third Pack Following the success of the LNER’s newly-introduced ‘Coronation’ trains in 1935, a new train was introduced to operate between London King’s Cross, Leeds and Bradford in 1937. A new set of carriages was built that was identical to the ‘Coronation’ with four twin articulated coaches, though not the streamlined beavertail observation car, and was named the ‘West Riding Limited’. Carriages were in pairs, sharing a bogie between the two, thus reducing friction and improving ride quality. The train first ran on 27th September 1937 and achieved an average speed of 63.3mph (101.9km/h) between King’s Cross and Bradford. It was hauled by Gresley's ‘A4’ No. 4492 ‘Dominion of New Zealand’, which had emerged from Doncaster Works only three months earlier. Services were suspended for the duration of the Second World War, but were reinstated in 1949. A modern version of the train is still operated by the present-day LNER with a 6.30am departure from Bradford Forster Square station. Vehicles ‘E’ and ‘F’ include a Third Class Open Coach and a another coach with third class seating and a second kitchen area. These highly detailed OO gauge LNER coaches are excellent replicas of the 'West Riding Limited' carriages.  - OO Scale

Hornby Railroad: Class 395 395005 Southeastern High Speed Train Pack

Railroad: Class 395 395005 Southeastern High Speed Train Pack Known as ‘Javelins’, these Class 395 trains are dual-voltage EMUs built as part of the Hitachi ‘AT300’ family for high-speed commuter services operated by Southeastern.  Introduced from June 2009, they are typically formed of six cars, though they can quickly be coupled together to form 12-cars when required. Based at Ashford and Ramsgate, there are currently 29 six-car sets in service. They can be found on services on High Speed 1, the North Kent Line, South Eastern Main Line, Chatham and Kent Coast lines, and the Ashford-Ramsgate line.  Our RailRoad model Train Pack brings the magic of the 'Javelins' to life on your OO gauge layout. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 57 57306 GBRf

Railroad: Class 57 57306 GBRf - OO Scale - 21 pin DCC Ready

Hornby Railroad: Class 57 57306 GBRf (Sound Fitted)

Railroad: class57 57306 GBRf (sound fitted) - OO scale - DCC TXS Sound Fitted (requires DCC or HM7000 App to operate)   -  NEM Tension Lock

Hornby Railroad: Class 803 803001 Lumo Train Pack

Railroad: Class 803 803001 Lumo Train Pack  Lumo are an open-access operator owned by FirstGroup running train services between London King’s Cross and Edinburgh Waverley using a fleet of Hitachi AT300 Class 803 electric multiple units.  Five sets are currently operated, each of five cars, with a single class of accommodation throughout. Built in 2020/1 and based on the successful Class 800 IEP ‘Azuma’ design, these units don’t have auxiliary diesel engines, but instead carry batteries intended to power on-board facilities in case of overhead power failure. In December 2024, FirstGroup announced that it was acquiring a further 14 of the five car units for its expanding operations.  This RailRoad model Train Pack brings the Lumo Class 800 to life on your layout. - DCC Ready 21-Pin Socket - OO Scale

Hornby Class 802/3 802301 'Amy Johnson' Hull Trains Pack

Class 802/3 802301 'Amy Johnson' Hull Trains Pack  In 2019, Hull Trains launched a poll to find suggestions for naming its five Class 802-3 ‘Paragon’ trains.  As a result, set 802301 was named ‘Amy Johnson’ after the Hull-born pioneering pilot who became the first woman to fly solo between London and Australia in the 1930s, setting many long-distance flying records. This unit was the first of Hull Trains’ Class 802-3 bi-mode units, entering service on 25th November 2019. The five 5-car sets work express services between Hull and London King’s Cross. Our OO model Train Pack is a fantastic replica of this modern design, with HM7000 capability if you add a 21-pin decoder (sold separately). - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST EMR 43274 & Intercity Swallow 43102 Pack

BR Class 43 HST EMR 43274 & Intercity Swallow 43102 Pack  This hybrid train pack represents the final months of HST operation with East Midland Railway in 2021, when 43274 became the first and only Class 43 to carry the interim EMR purple aubergine livery. Owned by Colas, it is still in service today. Meanwhile, 43102 was turned out in retro InterCity ‘Swallow’ livery in February 2021, recalling its record-setting feat with 43159, when they became the world’s fastest diesel locomotives attaining a speed of 148.5mph in November 1987. Withdrawn in May 2021, it is now part of the National Collection and on display at Shildon.  Our models feature NEM tension lock couplings, with the EMR locomotive sporting a stylish purple livery and the Intercity train painted in the iconic grey and white colours. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack

BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack This Virgin Class 43 HST 'Lady in Red' train pack brings the vibrant red and black livery to your model railway layout, creating quite an impression as it moves around the tracks. This OO gauge locomotive model has NEM tension lock couplings and a 21-pin socket, so you can upgrade to HM7000 control when you are ready.  Virgin Trains won both the InterCity West Coast and InterCity CrossCountry franchises following privatisation of BR, commencing services under its Virgin branding in 1997. It inherited a variety of locomotives and rolling stock from BR, including InterCity 125 HST sets.  Class 43 power car 43093 had been named ‘York Festival 88’ under BR, but was renamed ‘Lady in Red’ in 1997, which it carried until 2003, while 43097 had been called ‘The Light Infantry’ until 1990, but entered service with Virgin CrossCountry without a name. Painted in the company’s red and black livery, with white markings, both later became part of First Great Western’s HST fleet. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST Virgin West Coast Train Pack (Sound Fitted)

BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack (Sound Fitted) This Virgin Class 43 HST "Lady in Red' Train Pack brings the bold red branding of Virgin to your model railway layout, ensuring an eye-catching visual as it charges round the track. This OO model locomotive pack features NEM tension lock couplings and is ready-fited with HM7000 sound control, giving you a digital model railway experience.  Virgin Trains won both the InterCity West Coast and InterCity CrossCountry franchises following privatisation of BR, commencing services under its Virgin branding in 1997. It inherited a variety of locomotives and rolling stock from BR, including InterCity 125 HST sets.  Class 43 power car 43093 had been named ‘York Festival 88’ under BR, but was renamed ‘Lady in Red’ in 1997, which it carried until 2003, while 43097 had been called ‘The Light Infantry’ until 1990, but entered service with Virgin CrossCountry without a name. Painted in the company’s red and black livery, with white markings, both later became part of First Great Western’s HST fleet. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby The Beatles, The Liverpool Connection:EP Collection Side B

The Beatles, The Liverpool Connection:EP Collection Side B - OO scale

Hornby Railroad: GNR N2 1606 GNR Lined Green

Railroad: GNR N2 1606 GNR Lined Green Introduced to a design by Nigel Gresley for the Great Northern Railway in 1920, 1744 was built by the North British Locomotive Company in Glasgow in February 1921. At the Grouping two years later, it became LNER 4744 and then 9523 under the 1946 renumbering scheme, before finally becoming BR 69523 at nationalisation. Withdrawn from New England shed, Peterborough in September 1962, it was purchased by the Gresley Society Trust for preservation the following year. It has been based variously at the Keighley & Worth Valley Railway, the Great Central Railway and – most recently – the North Norfolk Railway, where, following a major overhaul, it is set to return to steam in time to celebrate ‘Gresley 150’ during 2026. - OO Scale

Hornby LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour)

LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour) Train Pack  In 1988, Australia celebrated its bicentenary and, to mark the occasion, the world-famous ‘Flying Scotsman’ was invited to travel from Britain to take part in a series of railtours that were part of the ‘Aus Steam 88’ Festival, arriving in October that year.  Already resident in Western Australia since 1977, in the care of the Pilbara Railway Historical Society, former GWR ‘Castle’ Class 4-6-0 ‘Pendennis Castle’ was moved by road to Perth in early 1989 to operate alongside its one-time rival ‘A3’ Class ‘Pacific’. This unlikely reunion occurred almost 9,000 miles from where a week-long locomotive exchange once took place between the LNER and GWR, in April 1925.  This LNER and GWR Train Pack celebrates that landmark event in Australia 37 years ago in 1989. Featuring OO gauge locomotive model replicas of 'Flying Scotsman' and 'Pendennis Castle', these highly detailed designs include sprung metal buffers and NEM tension lock couplings for smooth rake creation. Add a 21-pin decoder to upgrade to HM7000 control. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition)

LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition) (150th Anniversary Collection) The LNER Class A4 Sir Nigel Gresley model locomotive is a limited edition model and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Gresley's birth, and this locomotive includes a figure.  With a shiny new blue livery and NEM tension lock couplings, this steam locomotive is a wonderful collector's piece.  Entering service with the LNER as 4498 in Garter blue with streamlined side-skirting and red wheels, this was the 100th Gresley ‘Pacific’ to be built when it emerged from Doncaster Works in October 1937. Allocated to King’s Cross ‘Top Shed’ and used on front-line express services such as the prestigious ‘Coronation’ between London and Edinburgh, ‘SNG’ was built with a single chimney and had stainless steel numbers and letters for the tender added at a general overhaul in January 1939.  After a period in wartime black, when the side-skirts were permanently removed, the locomotive returned to lined Garter blue in March 1947. Painted into BR’s express passenger blue in September 1950, as 60007, it set a post-war steam record speed of 112mph on 23 May 1959. Withdrawn in February 1966, by now in BR green, it was saved for preservation by the A4 Locomotive Society. - DCC Ready 21-Pin Socket - OO Scale

Hornby LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition)

LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition) (150th Anniversary Collection) The LMS Streamlined 'Coronation' model locomotive is a limited edition item and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Stanier's birth, and this locomotive includes a figure. With a shiny bold red livery and NEM tension lock couplings, this steam locomotive is a must-have for collectors. The ‘Princess Coronation’ Class, also known as the ‘Duchess’ Class, was an enlarged and improved version of William Stanier’s successful ‘Princess Royal’ Class ‘Pacific’. The first ten class members emerged from Crewe Works in a streamlined form during 1937 and five of these were put aside specifically for hauling the prestigious ‘Coronation Scot’ between London Euston and Glasgow Central. These were painted in Caledonian blue and had silver horizontal lining, which matched the carriages they pulled. No. 6220 set a new British steam speed record of 114mph in 1937, but this was beaten by the LNER’s ‘Mallard’ in 1938. Built with a single chimney, 6220 was the last of the original 15 to be fitted with a double blast pipe and chimney in 1944. The locomotive’s streamlined casing was removed in November 1946, and it finished its career in its rebuilt form with smoke deflectors as BR’s 46220 in April 1963. - DCC Ready 21-Pin Socket - OO Scale

Hornby Ruston & Hornsby 88DS 97088 Loadhaul (DVLR)

Ruston & Hornsby 88DS 97088 Loadhaul (DVLR) A total of 271 of Ruston & Hornsby’s ‘88DS’ four-wheel diesels were supplied mainly to industrial sites in the UK and overseas, and were rated at 80/88hp. Built in Lincoln between 1938 and 1967, seven of these were also used by BR’s North Eastern Region on departmental duties.  This model is finished in the distinctive ‘Loadhaul’ livery of black and orange. Formed in 1994 as part of the privatisation of BR, Loadhaul Ltd became part of EWS and subsequently DB Cargo. This OO design also features NEM tension lock couplings. - DCC Ready 6-Pin Socket - OO Scale

Hornby Ruston & Hornsby 88DS No.245030 Glenochil Yeast Factory

Ruston & Hornsby 88DS No.245030 Glenochil Yeast Factory Display the bold logo of Glenochil Yeast Factory on this 88DS model locomotive. This diesel features NEM tension lock couplings and a lovely green livery.  The 80/88hp Ruston & Hornsby 4wDM was a reliable machine and ideal for the modest demands of smaller industrial concerns. Several found use in Scotland shunting rail-connected whisky distillery yards – in this case the yeast factory alongside the distillery of the same name, located just south of Menstrie in Clackmannanshire, where sidings connected with the Cambus-Alva branch line.  Works No. 245030 was built in 1947 and worked the factory yard until 1969, when it was sold to William Kerr Ltd in Stirling. It moved to Babcock & Wilcox Ltd., boiler makers in Renfrew, in 1971, where it remained until about 1978, then presumably scrapped. - DCC Ready 6-Pin Socket - OO Scale

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved The BR English Electric DP1 'Deltic' is always a favourite model, and with its new blue livery, this OO gauge diesel engine is sure to be just as popular. This version features sprung metal buffers, NEM tension lock couplings and a coreless motor. It is also DCC-ready with a 21-pin socket for easy HM7000 conversion. Features include: High detail OO gauge model based on extensive research Presented as on display in Locomotion, Shildon, with grey chassis, steps and buffers; and horns removed Heavy, fully die-cast chassis and body Highly detailed cab interior Decorated driver controls with illuminated instrument dials Directional head and tail lighting Optional working Mars lights Working cab lights Engine bay lighting Physical switches on blanking plug to control the various lighting configurations Magnetic roof cover to access 21-Pin DCC socket Dual working roof fans, with manually adjustable speed controls Separately fitted etched window frames Large, powerful coreless motor with two flywheels for smooth running Dual bogie drive Sprung metal buffers Front and rear NEM coupling pocket Additional lamps supplied in the accessory bag Hand painted driver figures Supplied with 8 finely decorated etchings, including Locomotion headboard Decorated engine bay featuring printed ‘Napier Deltic’ plates Pre-fitted with a sugar cube speaker for easy digital conversion Space inside for HM7000 Enhanced Bass Speaker Space inside fuel tank for HM7070 - Power Bank Flange squeal sensor mounted in the bogies automatically detects when it is going round a curve to play flange squeal sounds dependant on speed. (Feature available once product is fitted with a HM7000 decoder) Fitted to display plinth with etched presentation plate Fully compatible with Hornby HM7000 app control system, with meticulously crafted Deltic sound profile (SD049) available for download. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Dark Blue

BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Dark Blue  Add the Class 08 'Colchester TMD' model locomotive to your diesel collection in this elegant blue livery. With sprung metal buffers and NEM tension lock couplings, this is a delightful, highly detailed model.  Built at Crewe Works, this standard 350hp diesel electric shunter started life in November 1959 as D3760 and was allocated to Dannycraig depot at Swansea in South Wales. Under TOPS it was renumbered to 08593 and, in the 1990s, it was reallocated to Colchester where it received a retro-style red-lined BR livery with early ‘cycling lion’ emblem and its old number D3760.  It was also named ‘Colchester TMD’ which was applied in a cursive hand-writing style. It became part of the EWS fleet and, by 2010, it was withdrawn and then stored. It was acquired by Railway Support Services at Wishaw in 2016. - DCC Ready 8-Pin Socket - OO Scale

Hornby BR Class 10 10119 'Margaret Ethel-Thomas Alfred Naylor' BR Blue

BR Class 10 10119 'Margaret Ethel-Thomas Alfred Naylor' BR Blue (GCR Preserved)  This BR Class 10 is a stunning example of a non-standard locomotive, beautifully displayed in OO gauge model form. With sprung metal buffers and NEM tension lock couplings, this blue diesel locomotive is a highly detailled design for your model railway collection.  The BR Class 10 was a variation on the standard BR Class 08 shunter, fitted with Blackstone engines and GEC traction motors. Built at Darlington and Doncaster, 146 were produced between 1955 and 1962, but due to their non-standard nature, they were withdrawn early, between February 1967 and June 1972.  Built as D4067 in 1961 at Darlington, this locomotive initially worked at Darnall, Sheffield, followed by Langwith Junction and Shirebrook. Withdrawn in 1970, it was sold to the NCB and used at Betteshanger Colliery in Kent. It moved to Loughborough in 1980 for preservation and has been numbered 10119 and named after the owner’s parents. - DCC Ready 8-Pin Socket - OO Scale

Hornby BR Class 56 56001 BR Blue (TXS Sound Fitted)

BR Class 56 56001 BR Blue (TXS Sound Fitted) This BR Class 56 model locomotive is pre-fitted with sound and controllable via your HM7000 app for an impressive digital hobby experience. With sprung metal buffers and NEM tension lock couplings, this stylish blue and yellow model is a wonderful addition to your model railway layout.  The 50th anniversary of the completion of the first Class 56 is marked in 2026. The first of the 135-strong class arrived at Harwich from Romania in 1976, before commissioning by BR the following year. Only 30 examples were imported, due to relatively poor build quality, and these were subsequently rebuilt.  The remainder of the class were assembled by BREL at Doncaster and Crewe, with Ashford, Eastleigh, and Swindon supplying sub-assemblies, while Ruston-Paxman supplied the power units. No.56001 was new to Tinsley and withdrawn from Cardiff Canton in September 1996 after 19 years and six months in service with BR. - DCC Sound Fitted (HM7000) - OO Scale

Hornby BR Class 56 56047 Dutch Transrail (TXS Sound Fitted)

BR Class 56 56047 Dutch Transrail (TXS Sound Fitted) This Transrail Class 56 OO gauge model locomotive features a striking grey and yellow livery, with sprung metal buffers and NEM tension lock couplings. The highly detailed model is also pre-fitted with HM7000 sound capability for the most authentic experience.  Built at Doncaster Works, 56047 entered service at Toton in July 1978. Transrail Freight was set up as a trainload freight operator based in St Blazey, Cornwall, formed in 1994 from part of BR’s Trainload Freight division during the privatisation of British Rail. During this period, it acquired a number of Class 56 locomotives, retaining the Dutch-style livery but with the addition of Transrail’s logo and markings.  Transrail was one of a number of main line companies to be bought in 1996 to form new freight operator, English Welsh & Scottish (EWS). It was withdrawn in October 2003 and scrapped at Immingham. - DCC Sound Fitted (HM7000) - OO Scale

Hornby Stainer 5MT 'Black 5' 45473 BR Lined Black (Sound/Smoke Fitted)

Stainer 5MT 'Black 5' 45473 BR Lined Black (Sound/Smoke Fitted) The latest addition to our fleet of LMS Class 5MT model locomotives features our innovative steam generator technology. This highly detailed OO gauge model sends out burst of steam in time with the movement of the wheels for the most realistic running. Fitted with HM7000, it also includes sound and control from your mobile device. With sprung metal buffers and NEM tension lock couplings, this is an impressive locomotive for your model railway layout. History The Wiiliam Stanier-designed Class 5 was introduced in 1934 onto the LMS and by the time the last was built in 1951, the class was 842-strong. No. 45473 was completed at Derby in May 1943, entering service as 5473 and spending much of its working life in Scotland, being part of Perth’s allocation at the time of Nationalisation in 1948 and finishing its career at Dundee Tay Bridge. From there, it was withdrawn in November 1966 and subsequently scrapped at W.H. Arnott, Young at Co. Ltd, Carmyle, Glasgow the following February. Specific to R30475SS Running number 45473 BR Mixed Traffic livery Matt smokebox and cab roof finish. 5MT long wheelbase configuration. Flickering firebox. Fluted die-cast connecting rods. Walschaerts valve gear. Parallel buffer stocks. Common Class 5MT features High detail OO gauge model based on extensive research and original works drawings. Pre-fitted 21-pin HM7000 decoder and speaker. The decoder compatible with NMRA DCC controllers, HM7000 APP control and has the Merchant Navy sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Die-cast chassis and running plate. Model weight is 360 grams. High detail cab and fully decorated backhead with decorated instrument dials. HM7000 Power Bank compatible. Powerful 5 pole skew wound motor. Illuminated flickering firebox. Illuminated head lamps and tail lamps (can be controlled using a DCC Decoder). Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Die-cast connecting rods and valve gear. Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Opening cab roof vent. Adjustable cab doors. Sprung metal buffers. Front and rear NEM coupling pocket. Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - DCC HM7000 TXS Sound Fitted w/ Smoke - OO Scale

Hornby Stanier 5MT 'Black 5' 45055 BR Lined Black (Early)

Stanier 5MT 'Black 5' 45055 BR Lined Black (Early)  Completed in November 1935, this ‘Black Five’ was built at Vulcan Foundry, near Newton-le-Willows in Lancashire.  It spent most of its working career in north-west England and North Wales, though in 1966 it had brief allocations at West Hartlepool and York, before moving back to the Liverpool area and serving at Bank Hall and then Aintree. It almost lasted to the end of steam, withdrawal coming a month shy on 6th July 1968 from Lostock Hall, Preston, with scrapping the following February.  This OO gauge locomotive model features sprung metal buffers and NEM tension lock couplings, and can be upgraded to HM7000 control with a 21-pin decoder (sold separately). Details: Running number 45055 BR Mixed Traffic livery Matt smokebox and cab roof finish 5MT long wheelbase configuration Flickering firebox Fluted die-cast connecting rods Walschaerts valve gear Parallel buffer stocks Features: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and running plate. Model weight is 360 grams High detail cab and fully decorated backhead with decorated instrument dials HM7000 21-Pin Decoder socket HM7000 Power Bank compatible Powerful 5 pole skew wound motor Illuminated flickering firebox Illuminated head lamps and tail lamps (can be controlled using a DCC Decoder) Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast connecting rods and valve gear Prototypical size metal handrails with brass stanchions Brass main drive bearings Opening cab roof vent Adjustable cab doors Sprung metal buffers Front and Rear NEM coupling pocket Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - OO Scale

Hornby SECR H Class 161 SECR Green

SECR H Class 161 SECR Green This OO gauge SECR H Class locomotive model is a faithful representation of Harry Wainwright's H Class. With sprung metal buffers and NEM tension lock couplings, this model is DCC ready with an 8-pin socket ready for upgrading to digital control.  Designed by Harry Wainwright, 66 of these locomotives were built for the South Eastern & Chatham Railway at its Ashford Works between 1904 and 1915 for London suburban and semi-fast trains. Completed in June 1909, 161 engines carried the elaborate SECR livery, like the locomotive depicted by the model, until receiving a lined olive green livery when taken into SR stock and renumbered 1161 at the Grouping in 1923.  It later became BR 31161 and was withdrawn at Tunbridge Wells West in November 1961 after a creditable 51 years and 5 months’ service - DCC Ready 6-Pin Socket - OO Scale

Hornby LNER K1 2005 LNER Apple Green (Preserved)

LNER K1 2005 LNER Apple Green (Preserved) The LNER K1 Class is a must-have addition to your steam model railway. With sprung metal buffers and NEM tension lock couplings, you can upgrade to DCC control by adding a 21-pin decoder (sold seperately).  The ‘K1s’ were useful and versatile engines, working extensively across former LNER territory, but were mostly associated with north-east England and also the West Highland Line to Fort William and Mallaig.  No. 62005 was the final member of the 70-strong class to remain in service, being withdrawn from Leeds Holbeck in December 1967. Though it survives today in preservation, it was initially acquired as a source of spares for already-preserved ‘K4’ 3442. However, in 1972 it was donated to the North Eastern Locomotive Preservation Group and based at the North Yorkshire Moors Railway, where it was restored in its own right, returning to steam in 1975. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER K1 62046 BR Lined Black (Early)

LNER K1 62046 BR Lined Black (Early) Add a BR (Early) K1 Class locomotive to your model railway layout today. This stylish OO steam engine features sprung metal buffers and NEM tension lock couplings, and you can upgrade to DCC control by adding a 21 pin decoder (sold seperately).  Built in 1949/50, after the formation of BR in 1948, but to an LNER design that was instigated by Edward Thompson, with the conversion of a three-cylinder ‘K4’ at Darlington in 1945, the two-cylinder ‘K1s’ were much modified by Thompson’s successor as Chief Mechanical Engineer, Arthur H Peppercorn. No.62046 emerged from the North British Locomotive Works in Glasgow in October 1949 and was first allocated to Darlington shed. After a reallocation to York (North) in June 1956, the locomotive ended its career there in February 1967 and was scrapped by Hughes Bolckow at Blyth during April. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER P2 2004 'Mons Meg' LNER Apple Green

LNER P2 2004 'Mons Meg' LNER Apple Green 'Mons Meg' is a stunning example of one of Nigel Gresley's P2 engines, sporting a stylish green livery. It has sprung metal buffers and NEM tension lock couplings, with a 21-pin socket ready for upgrade to HM7000 control.  Nigel Gresley designed the P2s for hauling heavy express trains along the demanding route between Edinburgh and Aberdeen. Six were introduced between 1934 and 1936. The first three locomotives differed in appearance, the third having the wedge-shaped front similar to the A4s which was adopted for the remainder of the class. The first two also later converted.  Even then, 2004 was fitted with an experimental butterfly valve blastpipe bypass and the last two also had design differences, meaning that none of the six were built the same. All were subsequently rebuilt by Thompson as conventional Pacifics in 1943/4 by Gresley’s successor, Edward Thompson. - DCC Ready 21-Pin Socket - OO Scale  

Hornby LNER A4 4468 'Mallard' LNER Garter Blue (Sound/Smoke Fitted)

LNER A4 4468 'Mallard' LNER Garter Blue (Sound/Smoke Fitted) One of the most famous of all steam locomotives, ‘Mallard’ still holds the world speed record for steam. In July 1938, it reached 126mph on Stoke Bank. Entering service in March of that year in LNER Garter blue, it had full side valances and red wheels, as depicted by our highly detailed model. It was renumbered 22 in 1946, by which time it carried wartime plain black. When it was withdrawn from King’s Cross in April 1963, it was in lined BR green and numbered 60022. The locomotive is preserved in its original livery at the National Railway Museum in York. 'Mallard' has always been one of our most popular models. In 2026, we have given the A4 a tooling update and the model now includes the new Hornby steam generator technology, working headlights and tender lights. Specific to R30551SS Running number 4468 Lined Garter Blue livery Non-corridor tender Double chimney arrangement Valanced streamline body made from die-cast metal LHD cab arrangement Working headlights Working tender lights Common Class A4 features High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler High detail cab and fully decorated backhead with decorated instrument dials Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers, HM7000 APP control and has the Class A4 sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder HM7000 Power Bank compatible Powerful 5 pole skew wound motor Illuminated flickering firebox Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Fully decorated crew figures Turned brass safety valve Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Separately fitted simulated coal load. - DCC HM7000 TXS Sound Fitted w/ Smoke - OO Scale

Hornby LNER B12 61516 BR Lined Black (Late)

LNER B12 61516 BR Lined Black (Late)  A shining replica of the BR B12 Class, this OO gauge model is highly detailed, with sprung metal buffers and NEM tension lock couplings. Upgrade to HM7000 with a 21-pin decoder (sold seperately).  Stephen D Holden designed the ‘S69’ inside cylinder 4-6-0s for the Great Eastern Railway. First introduced in 1911, it was the last of 71 built before the Grouping appeared in 1921. However, a further ten were constructed by Beyer, Peacock for the LNER in 1928, by which time they had been designated the ‘B12’ Class.  Built at Stratford Works in 1913, 1516 entered traffic on GER expresses out of London’s Liverpool Street station in the November. In 1924, it was renumbered 8516, then 1516 under the LNER’s 1947 renumbering scheme. A year later it became BR’s 61516 and was withdrawn from Cambridge in July 1958. - DCC Ready 8-Pin Socket - OO Scale

Hornby LNER B12 8572 LNER Apple Green

LNER B12 8572 LNER Apple Green  This locomotive was one of the final batch of ten ‘B12s’ built by Beyer, Peacock in Manchester in 1928. It was renumbered 1572 by the LNER in 1946, but soon became BR’s 61572 in 1948.  Withdrawn from Norwich Thorpe in September 1961, it was acquired by the Midland & Great Northern Joint Railway Society and moved to the nascent North Norfolk Railway at Sheringham in 1967, where, since completion of its overhaul in 1995, it has been a mainstay of heritage services.  The original is currently out of ticket, undergoing overhaul, so the model is presented in as-preserved condition – the only surviving example of a British inside-cylinder 4-6-0. This highly detailed model features sprung metal buffers and NEM tension lock couplings for effortless rake-building. - DCC Ready 8-Pin Socket - OO Scale  

Hornby L&MR Robert Stephenson’s 'Rocket'

L&MR Robert Stephenson’s 'Rocket'  For the first time, Stephenson's Rocket is presented as a solo locomotive, with a sleek yellow livery, fixed metal buffers and chain couplings. This highly detailed, diminuitive locomotive model is a must-have model for steam collectors, due to its historical importance and incredible model engineering.  This historically important locomotive was built in 1929 to participate in the Rainhill Trials, a competition set-up by the promoters of the Liverpool and Manchester Railway to find suitable motive power for its opening the following year. Built to the order of his father George (who was the L&MR’s principal engineer at the time), ‘Rocket’ was designed by Robert Stephenson and built at his Forth Street Works in Newcastle-upon-Tyne.  The design was the most advanced in its day and ‘Rocket’ won the Trials. The locomotive then became one of four that took part in the L&MR’s opening parade in September 1930. - DCC Ready 6-Pin Socket - OO Scale

Hornby GWR Castle Class 5071 'Spitfire' BR Lined Green (Early)

GWR Castle Class 5071 'Spitfire' BR Lined Green (Early)  This locomotive entered service with the GWR at Newton Abbot in June 1938, initially named ‘Clifford Castle’, but this was changed to 'Spitfire' during the Second World War following the aeroplane’s pivotal role in the Battle of Britain during 1940.  It then spent most of its career shedded in the West Country, though after nationalisation, it had spells in the late 1950s at Gloucester and Worcester. The locomotive was fitted with a double chimney and four-row superheater in June 1959, before moving to St. Philip’s Marsh, Plymouth in February 1962, from where it was withdrawn in October 1963.  This detailed OO gauge model depicts 5071 in its original form, with a smart green livery. It also features sprung metal buffers, NEM tension lock couplings and a 21-pin socket, ready for upgrade to HM7000. - DCC Ready 21-Pin Socket - OO Scale

Hornby GWR Large Prairie 51xx Class 5153 BR Lined Green (Late)

GWR Large Prairie 51xx Class 5153 BR Lined Green (Late) Our highly detailed Large Prairie Locomotives feature sprung metal buffers and NEM tension lock couplings for smooth running and effortless rake creation. This Class 5101 model sports a lovely green livery and is a delightful addition to any steam collection.  Designed for suburban and local passenger services, 140 of these large ‘Prairies’ were built at Swindon between 1929 and 1949. These locomotives were a development of Churchward’s 1903 ‘31XX/51XX’ Class overseen by GWR Chief Mechanical Engineer, Charles Collett. New to Chester West shed, 5153 entered service in March 1930 and enjoyed a career that lasted almost 35 years.  After moving to Newton Abbot in the 1940s, it had a spell at Kidderminster before reaching Leamington in 1964, which was its final shed, withdrawal coming just three months later. It was scrapped in June 1965. - DCC Ready 8-Pin Socket - OO Scale

Hornby GWR Large Prairie 61xx Class 6126 British Railways Green

GWR Large Prairie 61xx Class 6126 British Railways Green A lovely addition to any OO gauge layout, this BR Class 61XX Large Prairie Locomotive is gorgeous in green. With sprung metal buffers and NEM tension lock couplings, this is a deligtful, highly detailed steam locomotive.  The ‘61XX’ Class was a direct development of the earlier ‘5101’ Class by Charles Collett, with a total of 70 locomotives turned out at Swindon Works between 1931 and 1935. The main difference was an increase in boiler pressure, which was raised to 225psi and gave a consequent increase in tractive effort.  No. 6126 entered service in October 1931 and spent much of its career based along the main Paddington to Bristol line, with postings at Slough, Southall, Reading, and Didcot. Its last shed was Oxford from May 1964, where it was withdrawn in December 1965 and sent for scrapping at Cashmore’s in Newport. - DCC Ready 8-Pin Socket - OO Scale

Hornby BR Standard Class 9F 92031 BR Black (Early)

BR Standard Class 9F 92031 BR Black (Early) The smart black BR (Early) Class 9F makes a wonderful OO gauge model locomotive addition to your collection. With sprung metal buffers and NEM tecnsion lock couplings, this model is DCC ready with a 21-pin socket. New to March in Cambridgeshire in November 1954, 92031 was one of 251 ‘standard’ heavy freight locomotives built to the design of Robert Riddles between January 1954 and March 1960. Its working career took it to allocations at New England (Peterborough), Annesley, Westhouses and Newton Heath, Manchester, from where it was withdrawn in January 1967 after an incredibly short working life of just 12 years and almost two months. Scrapped at T.W. Ward at Killamarsh, near Sheffield, the locomotive was always paired with a standard BR1F tender. - DCC Ready 21-Pin Socket - OO Scale