Dapol Class 59/0 59002 "Alan J Day" MRL Mendip Rail (Sound/Smoke)

Class 59/0 59002 "Alan J Day" MRL Mendip Rail (Sound/Smoke Fitted) - OO Scale The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Other than 59003 (which after return from loan to HHPI in Germany, is operated by GBRf), the Class 59 fleet is operated today by DB Schenker and Mendip Rail (an ARC and FY joint venture). Model Based on the huge success of the first production run of OO Gauge Class 59’s Dapol have decided to announce the launch of the second production run of this fantastic model. These models will feature lots of era specific details and markings and lots of external body details. They will also include a fully detailed cab. Features DCC fitted Sound Module Installed Smoke Unit Installed Finely moulded body with many applied fine details Printed name plates (Etched plates supplied separately) Cast wheels with fine relief and appropriate colouring Heavy diecast chassis with all wheel pick up NEM coupling pockets as standard All class 59 versions tooled Operating, independently controlled headlight and cab lights (all lighting variations tooled) DCC controlled fully independent lighting: Push/Pull and light engine modes for head and tail lights Day/Night headlamp selection Marker lamp control (where applicable) Independent cab lighting (leading cab /trailing cab /off) (DCC Only) Optional clag smoke simulation on initial acceleration

Dapol Bulk Grain Hopper BR B885327 (N)

Dapol Bulk Grain Hopper BR B885327 (N) 1:148 Scale Model Metal Wheels Highly Detailed Body and Chassis Design Pristine Paint Finish

Dapol Bulk Grain Hopper LMS 700366 (N)

Dapol Bulk Grain Hopper LMS 700366 (N) 1:148 Scale Model Metal Wheels Highly Detailed Body and Chassis Design Pristine Paint Finish

Dapol Class 59/2 59206 "John F Yeoman" Freightliner G&W Orange

Class 59/2 59206 "John F Yeoman" Freightliner G&W Orange  The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/0 59002 "Alan J Day" Aggregate Industries

Class 59/0 59002 "Alan J Day" Aggregate Industries  The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/0 59004 "Paul A Hammond" Foster Yeoman (Late)

Class 59/0 59004 "Paul A Hammond" Foster Yeoman (Late) The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/1 59101 "Village of Whatley" ARC (Revised)

Class 59/1 59101 "Village of Whatley" ARC (Revised) The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/1 59104 "Village of Great Elm" Hanson

Class 59/1 59104 "Village of Great Elm" Hanson The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 59/2 59201 "Vale of York" EWS

Class 59/2 59201 "Vale of York" EWS The Class 59 is a Co-Co formation diesel locomotive and the first US produced, privately-owned locomotive to operate regularly in the UK. The ordering of the first Class 59 was a result of quarry company Foster Yeomans dissatisfaction with the performance of the BR Class 56. The first 4 locomotives built by GMs Electromotive Division were delivered to Foster Yeoman during 1986 and 59005 in 1989. Proving very successful; one locomotive setting a new UK haulage record for a single locomotive of 4639 tonnes. Foster Yeomans rivals, Amey Roadstone Corp. (ARC) also ordered four modified Class 59s (59/1) as did National Power, who ordered six (59/2). GM invested in this initial UK success by extensively modifying the class 59 internally to produce the Class 66, also hugely successful, within both the UK and Continental Europe. Features: PLUX-22 DCC Decoder Socket Finely moulded body with many applied fine details  Printed name plates (Etched plates supplied separately)  Cast wheels with fine relief and appropriate colouring  Heavy diecast chassis with all wheel pick up  NEM pockets as standard  DC lighting with independent control of #1 & #2 end lamps (push/pull/light engine) and cab lighting (controlled by switches)  DCC controlled fully independent lighting:  Push/Pull and light engine modes for head and tail lights  Day/Night headlamp selection  Marker lamp control (where applicable)  Independent cab lighting (leading cab /trailing cab /off)   - OO Scale 

Dapol Class 87/0 '87002' "Royal Sovereign" Caledonian Sleeper (N)

Class 87/0 '87002' "Royal Sovereign" Caledonian Sleeper 36 Class 87 locomotives were introduced from 1973 to work the newly electrified northern section of the West Coast Mainline to Glasgow. These locomotives were based on the successful Class 86 design, featuring a modernised design and capable of generating 5000HP. The final loco in the build was revised to test new thyristor controls and was numbered 87101.   With new Mark 3 coaches, the 87s became known as the Electric Scots and significantly reduced journey times between Euston and Glasgow. The 87s provided front-line service with British Rail and latterly Virgin Trains until 2005, when replaced by Pendolino EMUs, with many locos transferring to other operators or being exported abroad. Features: Finely detailed body & roof with many extra fitted detail items  5 pole Super Creep motor with incredible controllable slow running speed  NEXT 18 DCC Decoder Socket All wheel drive and pick up  Finely detailed (posable/non functional) High-Speed and Cross-Arm pantographs (as appropriate)  Accessory bag with optional fitted parts  - N Scale

Dapol Class 87/0 '87017' "Iron Duke" Intercity Swallow (N)

Class 87/0 '87017' "Iron Duke" Intercity Swallow 36 Class 87 locomotives were introduced from 1973 to work the newly electrified northern section of the West Coast Mainline to Glasgow. These locomotives were based on the successful Class 86 design, featuring a modernised design and capable of generating 5000HP. The final loco in the build was revised to test new thyristor controls and was numbered 87101.   With new Mark 3 coaches, the 87s became known as the Electric Scots and significantly reduced journey times between Euston and Glasgow. The 87s provided front-line service with British Rail and latterly Virgin Trains until 2005, when replaced by Pendolino EMUs, with many locos transferring to other operators or being exported abroad. Features: Finely detailed body & roof with many extra fitted detail items  5 pole Super Creep motor with incredible controllable slow running speed  NEXT 18 DCC Decoder Socket All wheel drive and pick up  Finely detailed (posable/non functional) High-Speed and Cross-Arm pantographs (as appropriate)  Accessory bag with optional fitted parts  - N Scale

Dapol Class 87/0 '87022' DRS Original (N)

Class 87/0 '87022' DRS Original 36 Class 87 locomotives were introduced from 1973 to work the newly electrified northern section of the West Coast Mainline to Glasgow. These locomotives were based on the successful Class 86 design, featuring a modernised design and capable of generating 5000HP. The final loco in the build was revised to test new thyristor controls and was numbered 87101.   With new Mark 3 coaches, the 87s became known as the Electric Scots and significantly reduced journey times between Euston and Glasgow. The 87s provided front-line service with British Rail and latterly Virgin Trains until 2005, when replaced by Pendolino EMUs, with many locos transferring to other operators or being exported abroad. Features: Finely detailed body & roof with many extra fitted detail items  5 pole Super Creep motor with incredible controllable slow running speed  NEXT 18 DCC Decoder Socket All wheel drive and pick up  Finely detailed (posable/non functional) High-Speed and Cross-Arm pantographs (as appropriate)  Accessory bag with optional fitted parts  - N Scale

Dapol Class 87/1 '87101' "Stephenson" BR Blue (N)

Class 87/1 '87101' "Stephenson" BR Blue 36 Class 87 locomotives were introduced from 1973 to work the newly electrified northern section of the West Coast Mainline to Glasgow. These locomotives were based on the successful Class 86 design, featuring a modernised design and capable of generating 5000HP. The final loco in the build was revised to test new thyristor controls and was numbered 87101.   With new Mark 3 coaches, the 87s became known as the Electric Scots and significantly reduced journey times between Euston and Glasgow. The 87s provided front-line service with British Rail and latterly Virgin Trains until 2005, when replaced by Pendolino EMUs, with many locos transferring to other operators or being exported abroad. Features: Finely detailed body & roof with many extra fitted detail items  5 pole Super Creep motor with incredible controllable slow running speed  NEXT 18 DCC Decoder Socket All wheel drive and pick up  Finely detailed (posable/non functional) High-Speed and Cross-Arm pantographs (as appropriate)  Accessory bag with optional fitted parts  - N Scale

Dapol Class 56 '56007' Triple Grey Transrail (N)

Class 56 '56007' Triple Grey Transrail The British Rail Class 56 is a type of Co-Co locomotive designed for heavy freight work and was introduced between 1976 and 1983. In all 135 Class 56s were built, the first 30 by Electroputere in Romania but due to poor quality of construction the remainder were built by BREL at their Doncaster and Crewe works. The Class 56 was considered to be a successful locomotive and had a long service life. However performance and maintenance costs savings made from the deployment of the newly imported Class 66 resulted in most of the fleet of Class 56s being decommissioned or sold on by 2006. Several Class 56s are currently preserved and some class 56s are still in service today with private rail companies hauling freight and for the occasional special service.   Features: Retooled body with improvements to the body shape. cab roof and windows  Tooling options to accurately reproduce both Romanian and Doncaster bodyshell types Etched side and roof grilles in two styles  RP25.72 darkened wheels with pin point bearings  5 pole Super creep motor with controlled pulling power and incredible slow running speed  All wheel drive and pick up  Directional lights  Dapols low friction mechanism for efficient quiet running  Heavy split frame chassis for excellent running and haulage qualities    DCC Ready with a NEXT-18 decoder socket - N Scale

Dapol Class 56 '56131' BR Blue Large Logo (N)

Class 56 '56131' BR Blue Large Logo The British Rail Class 56 is a type of Co-Co locomotive designed for heavy freight work and was introduced between 1976 and 1983. In all 135 Class 56s were built, the first 30 by Electroputere in Romania but due to poor quality of construction the remainder were built by BREL at their Doncaster and Crewe works. The Class 56 was considered to be a successful locomotive and had a long service life. However performance and maintenance costs savings made from the deployment of the newly imported Class 66 resulted in most of the fleet of Class 56s being decommissioned or sold on by 2006. Several Class 56s are currently preserved and some class 56s are still in service today with private rail companies hauling freight and for the occasional special service.   Features: Retooled body with improvements to the body shape. cab roof and windows  Tooling options to accurately reproduce both Romanian and Doncaster bodyshell types Etched side and roof grilles in two styles  RP25.72 darkened wheels with pin point bearings  5 pole Super creep motor with controlled pulling power and incredible slow running speed  All wheel drive and pick up  Directional lights  Dapols low friction mechanism for efficient quiet running  Heavy split frame chassis for excellent running and haulage qualities    DCC Ready with a NEXT-18 decoder socket - N Scale

Dapol Class 56 '56302' Fastline Freight (N)

Class 56 '56302' Fastline Freight The British Rail Class 56 is a type of Co-Co locomotive designed for heavy freight work and was introduced between 1976 and 1983. In all 135 Class 56s were built, the first 30 by Electroputere in Romania but due to poor quality of construction the remainder were built by BREL at their Doncaster and Crewe works. The Class 56 was considered to be a successful locomotive and had a long service life. However performance and maintenance costs savings made from the deployment of the newly imported Class 66 resulted in most of the fleet of Class 56s being decommissioned or sold on by 2006. Several Class 56s are currently preserved and some class 56s are still in service today with private rail companies hauling freight and for the occasional special service.   Features: Retooled body with improvements to the body shape. cab roof and windows  Tooling options to accurately reproduce both Romanian and Doncaster bodyshell types Etched side and roof grilles in two styles  RP25.72 darkened wheels with pin point bearings  5 pole Super creep motor with controlled pulling power and incredible slow running speed  All wheel drive and pick up  Directional lights  Dapols low friction mechanism for efficient quiet running  Heavy split frame chassis for excellent running and haulage qualities    DCC Ready with a NEXT-18 decoder socket - N Scale

Dapol SR BOB Class '34066' "Spitfire" BR Green (Late) (N)

SR BOB Class '34066' "Spitfire" BR Green (Late) The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol SR BOB Class '34081' "92 Squadron" Malachite Green BR (N)

SR BOB Class '34081' "92 Squadron" Malachite Green BR The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol SR WC Class '21C113' "Okehampton" Malachite Green (N)

SR WC Class '21C113' "Okehampton" Malachite Green The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol SR WC Class '34001' "Exeter" BR Green (Early) (N)

SR WC Class '34001' "Exeter" BR Green (Early) The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol SR WC Class '34030' "Watersmeet" BR Green (Late) (N)

SR WC Class '34030' "Watersmeet" BR Green (Late) The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol SR BOB Class '21C164' "Fighter Command" Malachite Green (N)

SR BOB Class '21C164' "Fighter Command" Malachite Green The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale   

Dapol SR BOB Class '34051' "Winston Churchill" BR Green (Late) (N)

SR BOB Class '34051' "Winston Churchill" BR Green (Late) The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol SR BOB Class '34063' "229 Squadron" BR Green (Early) (N)

SR BOB Class '34063' "229 Squadron" BR Green (Early)  The Southern Region West Country and Battle of Britain classes with their 4-6-2 wheel arrangement were also known as Light Pacifics or informally as Spam Cans due to their unorthodox appearance. The class was designed by Oliver Bulleid and developed to be cheaper and easier to build using much of the innovations developed during wartime. The Battle of Britain Class and its sister, the Merchant Navy Class were the first to use welded steel in the manufacture of many key components, which reduced weight and building time. In all 110 were built between 1945 and 1950 and continued into service until the end of the steam era on the Southern Region in 1967. Due to some initial design limitations,  fifty of the class were rebuilt during the late 1950s, after which they resembled the rebuilt Merchant Navy Class. Twenty of the class survive into preservation.  Features: NEXT-18 Decoder Socket Powerful new coreless motor mounted in the locomotive boiler Robust locomotive to tender connection with electrical pick up from all locomotive driving wheels and tender wheels Heavy diecast chassis with weight balanced low down and over the driving wheels offering superb traction and pulling power The overall weight of the loco and tender is 102g. The loco without tender is 81g Highly detailed injection moulded locomotive and tender body with exquisite plate and rivet detail accurately recreated  Partial chassis compensation for smooth running and to aid electrical pick up  Many prototype specific details including three cab types, two tender versions, long and short smoke deflectors Superb dicast wheels· Firebox glow effect  Standard NEM fitting N Gauge couplers Printed name plates  Accessory bag with etched nameplates and detailed buffer beam fittings  - N Scale 

Dapol LMS Ivatt 2MT '41204' BR Lined Black (Late) (N)

LMS Ivatt 2MT '41204' BR Lined Black (Late) The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol LMS Ivatt 2MT '41208' BR Lined Black (Early) (N)

LMS Ivatt 2MT '41208' BR Lined Black (Early) The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol LMS Ivatt 2MT '41227' British Railways Lined Black (N)

LMS Ivatt 2MT '41227' British Railways Lined Black The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol LMS Ivatt 2MT '41236' BR Lined Black (Early) (N)

LMS Ivatt 2MT '41236' BR Lined Black (Early) The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol LMS Ivatt 2MT '41241' KWVR Lined Crimson Lake (N)

LMS Ivatt 2MT '41241' KWVR Lined Crimson Lake The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol LMS Ivatt 2MT '41319' BR Lined Black (Late) (N)

LMS Ivatt 2MT '41319' BR Lined Black (Late) The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol GWR 7800 Manor '7807' "Compton Manor" GW Green w/ Crest (N)

GWR 7800 Manor '7807' "Compton Manor" GW Green w/ Crest The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol GWR 7800 Manor '7808' "Cookham Manor" BR Green (Late) (N)

GWR 7800 Manor '7808' "Cookham Manor" BR Lined Green (Late) The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol GWR 7800 Manor '7810' "Draycott Manor" BR Green (Early) (N)

GWR 7800 Manor '7810' "Draycott Manor" BR Lined Green (Early) The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol GWR 7800 Manor '7814' "Fringford Manor" GWR Green (N)

GWR 7800 Manor '7814' "Fringford Manor" GWR Green The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol GWR 7800 Manor '7818' "Granville Manor" GW Green Shirtbutton (N)

GWR 7800 Manor '7818' "Granville Manor" GW Green Shirtbutton The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol LMS Ivatt 2MT '1207' LMS Unlined Black (N)

LMS Ivatt 2MT '1207' LMS Unlined Black The LMS Class 2 2-6-2 tank engines were designed by H. G. Ivatt and constructed between 1946 and 1952 to replace older locomotives.  This versatile class was built primarily for branch line duties for which their “Prairie” wheelbase was well suited. Ivatt also included several labour-saving features such as self-cleaning ashpans to improve operating economies.  Following an initial batch of ten locomotives built by the LMS, British Railways decided to enlarge the class and a further 120 examples were built.     During BR days, they were allocated to the LMR, SR and WR regions and were equally at home hauling passenger and goods services. The last member of the class was withdrawn in 1967, but four examples of this popular locomotive type have been preserved and all are presently operational. Features: Highly detailed body with many separately added parts   Expertly applied liveries  Die-cast wheels  Die-cast chassis  Keyed axles (similar to the Dapol N Gauge A4/A3) to prevent quartering slippage  DCC Raady with 6 pin decoder socket  3 pole can motor providing smooth slow speed running and a realistic top speed.  - N Scale

Dapol GWR 4300 Mogul '6324' BR Black (Early) (N)

GWR 4300 Mogul '6324' BR Black (Early) The series of models being manufactured by Dapol are to the later Churchward build from numbers 5390 through to 7321, constructed between 1920 and 1923 with the final eight (6362-6369) in 1925 under Collett. These Collett locomotives had outside cylinder steam pipes fitted from new, whilst this feature was added to the majority of the earlier batch from the late 1940s to the early 1950s. The last to be withdrawn was 6395 on 21-11-1964.  Features: Pickup from loco driving wheels and tender  Coreless motor  Tender body to be easily removable  Firebox Glow Space for sugar cube speaker in tender  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler  Smokebox with/without cylinder steam pipes  Diecast footplate  Churchward tapered buffers  Collett straight shank buffers  Tall vacuum pipe for early version  Lower vacuum pipe for later period  Tall safety valve coverShort safety valve cover  Smoke box top mounted lamp bracket  Smoke box door mounted lamp bracket for B.R. period  Smoke box number plate for B.R. period  Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels  Wheels to NMRA standard - N Scale

Dapol GWR 4300 Mogul '6336' BR Lined Green (Early) (N)

GWR 4300 Mogul '6336' BR Lined Green (Early) The series of models being manufactured by Dapol are to the later Churchward build from numbers 5390 through to 7321, constructed between 1920 and 1923 with the final eight (6362-6369) in 1925 under Collett. These Collett locomotives had outside cylinder steam pipes fitted from new, whilst this feature was added to the majority of the earlier batch from the late 1940s to the early 1950s. The last to be withdrawn was 6395 on 21-11-1964.  Features: Pickup from loco driving wheels and tender  Coreless motor  Tender body to be easily removable  Firebox Glow Space for sugar cube speaker in tender  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler  Smokebox with/without cylinder steam pipes  Diecast footplate  Churchward tapered buffers  Collett straight shank buffers  Tall vacuum pipe for early version  Lower vacuum pipe for later period  Tall safety valve coverShort safety valve cover  Smoke box top mounted lamp bracket  Smoke box door mounted lamp bracket for B.R. period  Smoke box number plate for B.R. period  Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels  Wheels to NMRA standard - N Scale

Dapol GWR 4300 Mogul '6336' Great Western Green (N)

GWR 4300 Mogul '6336' Great Western Green The series of models being manufactured by Dapol are to the later Churchward build from numbers 5390 through to 7321, constructed between 1920 and 1923 with the final eight (6362-6369) in 1925 under Collett. These Collett locomotives had outside cylinder steam pipes fitted from new, whilst this feature was added to the majority of the earlier batch from the late 1940s to the early 1950s. The last to be withdrawn was 6395 on 21-11-1964.  Features: Pickup from loco driving wheels and tender  Coreless motor  Tender body to be easily removable  Firebox Glow Space for sugar cube speaker in tender  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler  Smokebox with/without cylinder steam pipes  Diecast footplate  Churchward tapered buffers  Collett straight shank buffers  Tall vacuum pipe for early version  Lower vacuum pipe for later period  Tall safety valve coverShort safety valve cover  Smoke box top mounted lamp bracket  Smoke box door mounted lamp bracket for B.R. period  Smoke box number plate for B.R. period  Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels  Wheels to NMRA standard - N Scale

Dapol GWR 4300 Mogul '6385' GWR Green Shirtbutton (N)

GWR 4300 Mogul '6385' GWR Green Shirtbutton The series of models being manufactured by Dapol are to the later Churchward build from numbers 5390 through to 7321, constructed between 1920 and 1923 with the final eight (6362-6369) in 1925 under Collett. These Collett locomotives had outside cylinder steam pipes fitted from new, whilst this feature was added to the majority of the earlier batch from the late 1940s to the early 1950s. The last to be withdrawn was 6395 on 21-11-1964.  Features: Pickup from loco driving wheels and tender  Coreless motor  Tender body to be easily removable  Firebox Glow Space for sugar cube speaker in tender  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler  Smokebox with/without cylinder steam pipes  Diecast footplate  Churchward tapered buffers  Collett straight shank buffers  Tall vacuum pipe for early version  Lower vacuum pipe for later period  Tall safety valve coverShort safety valve cover  Smoke box top mounted lamp bracket  Smoke box door mounted lamp bracket for B.R. period  Smoke box number plate for B.R. period  Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels  Wheels to NMRA standard - N Scale

Dapol GWR 4300 Mogul '7301' GWR Green (N)

GWR 4300 Mogul '7301' GWR Green The series of models being manufactured by Dapol are to the later Churchward build from numbers 5390 through to 7321, constructed between 1920 and 1923 with the final eight (6362-6369) in 1925 under Collett. These Collett locomotives had outside cylinder steam pipes fitted from new, whilst this feature was added to the majority of the earlier batch from the late 1940s to the early 1950s. The last to be withdrawn was 6395 on 21-11-1964.  Features: Pickup from loco driving wheels and tender  Coreless motor  Tender body to be easily removable  Firebox Glow Space for sugar cube speaker in tender  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler  Smokebox with/without cylinder steam pipes  Diecast footplate  Churchward tapered buffers  Collett straight shank buffers  Tall vacuum pipe for early version  Lower vacuum pipe for later period  Tall safety valve coverShort safety valve cover  Smoke box top mounted lamp bracket  Smoke box door mounted lamp bracket for B.R. period  Smoke box number plate for B.R. period  Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels  Wheels to NMRA standard - N Scale

Dapol GWR 4300 Mogul '7310' BR Lined Green (Late) (N)

GWR 4300 Mogul '7310' BR Lined Green (Late) The series of models being manufactured by Dapol are to the later Churchward build from numbers 5390 through to 7321, constructed between 1920 and 1923 with the final eight (6362-6369) in 1925 under Collett. These Collett locomotives had outside cylinder steam pipes fitted from new, whilst this feature was added to the majority of the earlier batch from the late 1940s to the early 1950s. The last to be withdrawn was 6395 on 21-11-1964.  Features: Pickup from loco driving wheels and tender  Coreless motor  Tender body to be easily removable  Firebox Glow Space for sugar cube speaker in tender  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler  Smokebox with/without cylinder steam pipes  Diecast footplate  Churchward tapered buffers  Collett straight shank buffers  Tall vacuum pipe for early version  Lower vacuum pipe for later period  Tall safety valve coverShort safety valve cover  Smoke box top mounted lamp bracket  Smoke box door mounted lamp bracket for B.R. period  Smoke box number plate for B.R. period  Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels  Wheels to NMRA standard - N Scale

Dapol GWR 7800 Manor '7800' "Torquay Manor" BR Black (Early) (N)

GWR 7800 Manor '7800' "Torquay Manor" BR Black (Early) The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol GWR 7800 Manor '7803' "Barcote Manor" BR Green (Late) (N)

GWR 7800 Manor '7803' "Barcote Manor" BR Lined Green (Late) The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol Class 66 '66001' EWS (O)

Class 66 '66001' EWS Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol Class 66 '66421' "Gresty Bridge TMD" DRS Plain Blue (O)

Class 66 '66421' "Gresty Bridge TMD" DRS Plain Blue Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol Class 66 '66504' Freightliner Powerhaul (O)

Class 66 '66504' Freightliner Powerhaul Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol Class 66 '66709' "Sorento" GBRf Europorte MSC (O)

Class 66 '66709' "Sorento" GBRf Europorte MSC Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol Class 66 '66783' "The Flying Dustman" GBRf Biffa (O)

Class 66 '66783' "The Flying Dustman" GBRf Biffa Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol Class 66 '66789' "British Rail 1949 - 1997" GBRf Large Logo (O)

Class 66 '66789' "British Rail 1949 - 1997" GBRf Large Logo  Features: Operating front/rear lights (independent operation for DCC, (switched for DC use) Includes day/night mode) Operating ‘side’ lights (where lighting cluster is applicable) Cab light (independent operation) Detailed cab with illuminated cab control panel Two motors (balanced & matched) for maximum pulling power and slow speed running control DC control switches to be accessible via lift-off roof panel DCC Ready with two PLUX 22 decoder sockets Etched grills now with added detail showing radiator equipment with engine room lighting Separate detail (Handrails, Handles, Grills etc.) Heavyweight Diecast chassis Diecast bogie frames  Rotating axle centres Appropriate couplings attached O gauge society wheel profiles Sprung buffers Interchangeable front buffer beams with the option for an auto coupler to be used The entire buffer beam assembly can be swapped out leaving no unsightly seams on the valance     - O Scale

Dapol KQA/KTA Container Wagon Tiphook Blue 4907 011 7 (OO)

KQA/KTA Container Wagon Tiphook Blue 4907 011 7 During the 1990's the growing use of 9'6" tall (High Cube) containers was causing problems for freight  operators transporting them on height restricted UK railway lines using standard intermodal flat bed wagons. The Tiphook approach to solve this problem was not the conventional solution of lowering the platform and using smaller wheels, instead they designed a latticed platform that sat low down, below the top level of the bogies and a pocket was formed with the slab sides that gave the wagon strength and rigidity. In total seventy five of these wagons were built by Rautaruuki in Finland. They were delivered in two batches between 1997 and 1998 and bore a blue Tiphook livery. Features: Highly detailed body moulding  Accurately applied livery  NEM pockets and couplings fitted as standard  Previous models shown for illustration only  *Containers sold separately    - OO Scale

Dapol KQA/KTA Container Wagon Tiphook Blue 4907 033 1 (OO)

KQA/KTA Container Wagon Tiphook Blue 4907 033 1 During the 1990's the growing use of 9'6" tall (High Cube) containers was causing problems for freight  operators transporting them on height restricted UK railway lines using standard intermodal flat bed wagons. The Tiphook approach to solve this problem was not the conventional solution of lowering the platform and using smaller wheels, instead they designed a latticed platform that sat low down, below the top level of the bogies and a pocket was formed with the slab sides that gave the wagon strength and rigidity. In total seventy five of these wagons were built by Rautaruuki in Finland. They were delivered in two batches between 1997 and 1998 and bore a blue Tiphook livery. Features: Highly detailed body moulding  Accurately applied livery  NEM pockets and couplings fitted as standard  Previous models shown for illustration only  *Containers sold separately    - OO Scale

Dapol KQA/KTA Container Wagon Touax GERS 97752 (OO)

KQA/KTA Container Wagon Touax GERS 97752  During the 1990's the growing use of 9'6" tall (High Cube) containers was causing problems for freight  operators transporting them on height restricted UK railway lines using standard intermodal flat bed wagons. The Tiphook approach to solve this problem was not the conventional solution of lowering the platform and using smaller wheels, instead they designed a latticed platform that sat low down, below the top level of the bogies and a pocket was formed with the slab sides that gave the wagon strength and rigidity. In total seventy five of these wagons were built by Rautaruuki in Finland. They were delivered in two batches between 1997 and 1998 and bore a blue Tiphook livery. Features: Highly detailed body moulding  Accurately applied livery  NEM pockets and couplings fitted as standard  Previous models shown for illustration only  *Containers sold separately    - OO Scale

Dapol KQA/KTA Container Wagon Touax GERS 97763 (OO)

KQA/KTA Container Wagon Touax GERS 97763 During the 1990's the growing use of 9'6" tall (High Cube) containers was causing problems for freight  operators transporting them on height restricted UK railway lines using standard intermodal flat bed wagons. The Tiphook approach to solve this problem was not the conventional solution of lowering the platform and using smaller wheels, instead they designed a latticed platform that sat low down, below the top level of the bogies and a pocket was formed with the slab sides that gave the wagon strength and rigidity. In total seventy five of these wagons were built by Rautaruuki in Finland. They were delivered in two batches between 1997 and 1998 and bore a blue Tiphook livery. Features: Highly detailed body moulding  Accurately applied livery  NEM pockets and couplings fitted as standard  Previous models shown for illustration only  *Containers sold separately    - OO Scale

Dapol Class 66 '66001' DB Cargo (N)

Class 66 '66001' DB Cargo  The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor      All wheel pickup              All wheel drive via re-worked smooth drive low maintenance mechanism              Die-cast chassis             DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled                 Independent directional front/rear cab lighting control           Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets     Standard NEM fitting N Gauge couplers              RP 25 wheels     Newly tooled highly detailed body and fittings   Accessory bag with etched nameplates and detailed buffer beam fittings         Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66096' EWS (N)

Class 66 '66096' EWS The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor      All wheel pickup              All wheel drive via re-worked smooth drive low maintenance mechanism              Die-cast chassis             DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled                 Independent directional front/rear cab lighting control           Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets     Standard NEM fitting N Gauge couplers              RP 25 wheels     Newly tooled highly detailed body and fittings   Accessory bag with etched nameplates and detailed buffer beam fittings         Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66531' Freightliner Racing Green (N)

Class 66 '66531' Freightliner Racing Green The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66706' "Nene Valley" GBRf Europorte (N)

Class 66 '66706' "Nene Valley" GBRf Europorte The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66734' "Platinum Jubilee" GBRf Jubilee Pink (N)

Class 66 '66734' "Platinum Jubilee" GBRf Jubilee Pink The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66779' "Evening Star" GBRf BR Lined Green (N)

Class 66 '66779' "Evening Star" GBRf BR Lined Green The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66846' Colas Rail Freight (N)

Class 66 '66846' Colas Rail Freight The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 33/0 '33025' DRS Minimodal (N)

Class 33/0 '33025' DRS Minimodal The British Rail Class 33 is a class of Bo-Bo diesel-electric locomotive built by BRCW for the Southern Region of BR between 1960 and 1962. 98 class 33s were originally built and bore the numbers D6500 - D6597. The class was affectionately known as ‘Cromptons’ after the brand of electrical equipment installed and shared many features with its lesser powered sisters, the Class 26 and 27. In all 26 examples of the Class 33 survive preservation.  Features: Detailed body with etched grills and separately fitted handrails  RP25.72 darkened wheels with pin point bearings  5 pole Super creep motor with huge pulling power and incredible slow running speed NEXT-18 DCC Decoder Socket All wheel drive and pick up  Independently controllable directional lighting  Dapol’s low friction mechanism for efficient quiet running  Heavy split frame chassis for excellent running and haulage qualities    - N Scale

Dapol Class 33/1 '33103' "Swordfish" Fragonset (N)

Class 33/1 '33103' "Swordfish" Fragonset The British Rail Class 33 is a class of Bo-Bo diesel-electric locomotive built by BRCW for the Southern Region of BR between 1960 and 1962. 98 class 33s were originally built and bore the numbers D6500 - D6597. The class was affectionately known as ‘Cromptons’ after the brand of electrical equipment installed and shared many features with its lesser powered sisters, the Class 26 and 27. In all 26 examples of the Class 33 survive preservation.  Features: Detailed body with etched grills and separately fitted handrails  RP25.72 darkened wheels with pin point bearings  5 pole Super creep motor with huge pulling power and incredible slow running speed NEXT-18 DCC Decoder Socket All wheel drive and pick up  Independently controllable directional lighting  Dapol’s low friction mechanism for efficient quiet running  Heavy split frame chassis for excellent running and haulage qualities    - N Scale

Dapol Class 33/1 'D6580' BR Green VSYP (N)

Class 33/1 'D6580' BR Green VSYP The British Rail Class 33 is a class of Bo-Bo diesel-electric locomotive built by BRCW for the Southern Region of BR between 1960 and 1962. 98 class 33s were originally built and bore the numbers D6500 - D6597. The class was affectionately known as ‘Cromptons’ after the brand of electrical equipment installed and shared many features with its lesser powered sisters, the Class 26 and 27. In all 26 examples of the Class 33 survive preservation.  Features: Detailed body with etched grills and separately fitted handrails  RP25.72 darkened wheels with pin point bearings  5 pole Super creep motor with huge pulling power and incredible slow running speed NEXT-18 DCC Decoder Socket All wheel drive and pick up  Independently controllable directional lighting  Dapol’s low friction mechanism for efficient quiet running  Heavy split frame chassis for excellent running and haulage qualities    - N Scale

Dapol NER Class E1 (LNER J72) '2173' NER Lined Black (N)

NER Class E1 (LNER J72) '2173' NER Lined Black First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '2183' LNER Pre-War Black (N)

LNER J72 '2183' LNER Pre-War Black First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68723' BR Black (Early) (Newcastle Station Pilot) (N)

LNER J72 '68723' BR Black (Early) (Newcastle Station Pilot) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68736' BR Lined Apple Green (York Station Pilot) (N)

LNER J72 '68736' BR Lined Apple Green (York Station Pilot) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '68745' BR Black (Early) (N)

LNER J72 '68745' BR Black (Early) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '69007' BR Black (Late) (N)

LNER J72 '69007' BR Black (Late) First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '69023' BR Lined Apple Green (Preserved) (N)

LNER J72 '69023' BR Lined Apple Green (Preserved)  First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol LNER J72 '8680' LNER Lined Green (N)

LNER J72 '8680' LNER Lined Green First built in 1898 as a smaller wheel shunting variant of the successful J71 class, the J72 continued to be built, with minor changes over the next 53 years. In 1937 two of the class were fitted with vacuum braking to work as carriage shunters and more followed from 1947 onwards, eventually leading to 41 members of the class being so fitted. Several of the vacuum brake fitted locomotives were repainted in lined passenger liveries by both the LNER and British Railways for use as station pilots. Locomotives so painted were generally keep very clean by shed staff and crews. The 113 members of the class all continued their sterling work until the first locomotive was withdrawn in 1958. The final locomotive was withdrawn out of normal service in 1964 but two were transferred to Departmental Stock, one of these locomotives lasted in this roll until 1967. One member of the class, number 69023 is preserved.  Features: Pickup from all six driving wheels  Coreless motor  Flywheel  Provision for Next-18 Decoder in cab  Access for decoder fitting via four screws  Direct springing to centre driving wheel bearings to ensure electrical contact Diecast footplate  Diecast tanks· NER tapered buffers LNER “Group Standard” buffers  NER wheel and handle smokebox door locking  Later, LNER two handle style smokebox door locking  Vacuum brake equipment for locomotives so fitted  Smokebox numberplate for B.R. period  Ross Pop safety valves  NER style “trumpet” safety valve cover Diecast chassis – split frames for live bearing pickup Blackened nickel plated driving wheels Brass bearings  Plastic keeper plate with brake shoe/linkage details Sprung centre driving wheels Wheels to NMRA standards - N Scale

Dapol BR Mk3A FO 'M11058' BR Blue/Grey Inter-City (N)

BR Mk3A FO 'M11058' BR Blue/Grey Inter-City The British Rail Mk 3 coach was developed primarily for the Class 43 HST, but incorporated design features to enable it to be hauled by conventional locomotives. The first coach entered service in 1975 and the last were made in 1988. Most Mk.3 coaches built are still in service today, including the Royal Train.  Features: Finely detailed body, underframe and bogies  Innovative lightbar feature where an optional Dapol Lightbar can be fitted  NEM coupling as standard  Fine application of livery and decoration details   Full internal detail   - N Scale

Dapol BR Mk3A TSO 'M12017' BR Blue/Grey Inter-City (N)

BR Mk3A TSO 'M12017' BR Blue/Grey Inter-City The British Rail Mk 3 coach was developed primarily for the Class 43 HST, but incorporated design features to enable it to be hauled by conventional locomotives. The first coach entered service in 1975 and the last were made in 1988. Most Mk.3 coaches built are still in service today, including the Royal Train.  Features: Finely detailed body, underframe and bogies  Innovative lightbar feature where an optional Dapol Lightbar can be fitted  NEM coupling as standard  Fine application of livery and decoration details   Full internal detail   - N Scale

Dapol BR Mk3A TSO 'M12018' BR Blue/Grey Inter-City (N)

BR Mk3A TSO 'M12018' BR Blue/Grey Inter-City The British Rail Mk 3 coach was developed primarily for the Class 43 HST, but incorporated design features to enable it to be hauled by conventional locomotives. The first coach entered service in 1975 and the last were made in 1988. Most Mk.3 coaches built are still in service today, including the Royal Train.  Features: Finely detailed body, underframe and bogies  Innovative lightbar feature where an optional Dapol Lightbar can be fitted  NEM coupling as standard  Fine application of livery and decoration details   Full internal detail   - N Scale

Dapol BR Mk3 QXA 'RDB975984' BR RTC Laboratory 15 'Argus' (N)

BR Mk3 QXA 'RDB975984' BR RTC Laboratory 15 'Argus' The British Rail Mk 3 coach was developed primarily for the Class 43 HST, but incorporated design features to enable it to be hauled by conventional locomotives. The first coach entered service in 1975 and the last were made in 1988. Most Mk.3 coaches built are still in service today, including the Royal Train.  Features: Finely detailed body, underframe and bogies  Innovative lightbar feature where an optional Dapol Lightbar can be fitted  NEM coupling as standard  Fine application of livery and decoration details   Full internal detail   - N Scale

Dapol BR Mk3 QXA 'ADB975814' BR RTC Test Car 10 (N)

BR Mk3 QXA 'ADB975814' BR RTC Test Car 10 The British Rail Mk 3 coach was developed primarily for the Class 43 HST, but incorporated design features to enable it to be hauled by conventional locomotives. The first coach entered service in 1975 and the last were made in 1988. Most Mk.3 coaches built are still in service today, including the Royal Train.  Features: Finely detailed body, underframe and bogies  Innovative lightbar feature where an optional Dapol Lightbar can be fitted  NEM coupling as standard  Fine application of livery and decoration details   Full internal detail   - N Scale

Dapol Class 142 142038 Regional Railways GMPTE (N)

Class 142 142038 Regional Railways GMPTE The British Rail Class 142 is a type of diesel railbus multiple unit designed to run in pairs for use on branch lines in Northern and South Western England and North Wales. Ninety six of the sets were built by BREL at Derby between 1985 and 1987 and followed on from the design of the Class 141. Initially, the Class 142 exhibited many operational problems including the inability to negotiate tight curves, a lack of power with poor braking and a rough uncomfortable ride. The class was extensively modified in subsequent years to overcome some of these shortcomings with the adoption of a more powerful diesel engine, uprated brakes and a plethora of internal and external detail improvements. Even with these changes the Class 142 was deemed unsuitable for working the tighter curves of the South Western rail system and the fleet was transferred post privatisation between NW Trains and Northern Spirit, where they are still used primarily on commuter routes between the major cities of the region.  Features: A Powered and a dummy car in each set  NEXT-18 DCC Decoder Socket Detailed bodies with flush glazing  Close coupling mechanism with corridor connectorScharfenberg coupling mechanism fitted as standard  All wheel drive and pick up on power unit  Directional lights on both carsIndependently controllable internal (where fitted) and external lighting  Accessory bag with optional fitted components  - N Scale

Dapol Class 142 142058 BR Provincial Network Northwest (N)

Class 142 142058 BR Provincial Network Northwest The British Rail Class 142 is a type of diesel railbus multiple unit designed to run in pairs for use on branch lines in Northern and South Western England and North Wales. Ninety six of the sets were built by BREL at Derby between 1985 and 1987 and followed on from the design of the Class 141. Initially, the Class 142 exhibited many operational problems including the inability to negotiate tight curves, a lack of power with poor braking and a rough uncomfortable ride. The class was extensively modified in subsequent years to overcome some of these shortcomings with the adoption of a more powerful diesel engine, uprated brakes and a plethora of internal and external detail improvements. Even with these changes the Class 142 was deemed unsuitable for working the tighter curves of the South Western rail system and the fleet was transferred post privatisation between NW Trains and Northern Spirit, where they are still used primarily on commuter routes between the major cities of the region.  Features: A Powered and a dummy car in each set  NEXT-18 DCC Decoder Socket Detailed bodies with flush glazing  Close coupling mechanism with corridor connectorScharfenberg coupling mechanism fitted as standard  All wheel drive and pick up on power unit  Directional lights on both carsIndependently controllable internal (where fitted) and external lighting  Accessory bag with optional fitted components  - N Scale

Dapol Class 142 142070 First Great Western (exFirst NW Gold Star) (N)

Class 142 142070 First Great Western (exFirst NW Gold Star) The British Rail Class 142 is a type of diesel railbus multiple unit designed to run in pairs for use on branch lines in Northern and South Western England and North Wales. Ninety six of the sets were built by BREL at Derby between 1985 and 1987 and followed on from the design of the Class 141. Initially, the Class 142 exhibited many operational problems including the inability to negotiate tight curves, a lack of power with poor braking and a rough uncomfortable ride. The class was extensively modified in subsequent years to overcome some of these shortcomings with the adoption of a more powerful diesel engine, uprated brakes and a plethora of internal and external detail improvements. Even with these changes the Class 142 was deemed unsuitable for working the tighter curves of the South Western rail system and the fleet was transferred post privatisation between NW Trains and Northern Spirit, where they are still used primarily on commuter routes between the major cities of the region.  Features: A Powered and a dummy car in each set  NEXT-18 DCC Decoder Socket Detailed bodies with flush glazing  Close coupling mechanism with corridor connectorScharfenberg coupling mechanism fitted as standard  All wheel drive and pick up on power unit  Directional lights on both carsIndependently controllable internal (where fitted) and external lighting  Accessory bag with optional fitted components  - N Scale

Dapol Chiltern Railways 8x PC Slam Door Set with DVT (N)

Chiltern Railways 8 Piece Slam Door Set with DVT (N) Includes: - 5 x Mk3a TSO, 2 x Mk3a FO, 1 x Mk3 DVT - Finely detailed body with many extra fitted items - All wheel electrical pick up - Directional lights - NEXT-18 Decoder Socket - Accessory bag with optional fitted parts

Dapol Class 57xx Pannier 9669 BR Black Late Crest (O)

Class 57xx Pannier 9669 BR Late Crest The 5700 class were introduced in 1929, whilst the 8750 class followed in 1933 and by 1950 863 locomotives had been constructed, making this perhaps the most successful 0-6-0. G.W.R. Classification: Group C, Route Blue, changed to yellow under B.R. B.R. Classification: 3F. Designed for shunting and short freight workings, however it soon became clear that other duties could be performed such as branch passenger working and mainline freight, being widespread across the system. The 8750 class can be distinguished from the 5700 class by the totally enclosed larger cab. Whistle shields and bunker steps with handrails were added from 1936. A new water feed was introduced in 1942 with the clack valves being fitted inside a case on top of the boiler in front of the dome, which became standard for builds after 1944. Between 1956 and 1963, thirteen 5700 locomotives were sold to the London Transport being painted in the attractive lined red livery. The NCB bought five 5700 locomotives between 1959 and 1965, with number 7754 still working in 1975. Last of class withdrawn: 1966. Preserved examples: 3650, 3738, 4612, 5764/L95, 5775/L89, 5786/L92, 7714, 7715/L99, 7752/L94, 7754, 7760/L90, 9600, 9629, 9642, 9681, 9682 Features of the 57XX & 8750 include: Diecast Chassis and footplate for excellent adhesion and pulling power Powerful 5 pole motor providing fine power control Beautifully detailed body with correct body type variations applied where relevant with many separately added details Partial representation of working inside motion and many other exquisite fine details including: Four cabs for original 57XX, Later 57XX, 8750 Collett cab and London Transport cab Sprung Buffers Removable roof, secured with magnets for ease of fitting engine crew Working cab doors, where fitted Flickering fire box glow Ash pan with correct double brake rodding Expertly applied livery Wheels conform to the new O Gauge standard, suitable for O Super Fine DCC Ready with a 21 pin decoder socket - O Scale

Dapol SR 12T Van - Dinky Toys (O)

SR 12T Van - Dinky Toys Features: Accurately moulded body & chassis Self-compensating chassis for smooth trouble free running Metal sprung buffers Metal Instanter coupling  Finely profiled wheels and axles with brass bearing pockets  Fine application of livery    - O Scale

Dapol SR 12T Van - Mamod (O)

SR 12T Van - Mamod Features: Accurately moulded body & chassis Self-compensating chassis for smooth trouble free running Metal sprung buffers Metal Instanter coupling  Finely profiled wheels and axles with brass bearing pockets  Fine application of livery    - O Scale

Dapol SR 12T Van - Matchbox (O)

SR 12T Van - Matchbox Features: Accurately moulded body & chassis Self-compensating chassis for smooth trouble free running Metal sprung buffers Metal Instanter coupling  Finely profiled wheels and axles with brass bearing pockets  Fine application of livery    - O Scale

Dapol GWR Toplight Mainline City BR Maroon Composite 7911 S6

GWR Toplight Mainline City BR Maroon Composite 7911 S6 The Dapol OO Gauge GWR Toplight Mainline City coaches  have the following features and details:  Highly accurate injection moulded body with bolection window mouldings and frosted Toplight windows. Separate metal door and commode handles Wire end hand rails and separately applied end communication details Correct number of roof ventilators depending on the prototypical period being modelled Highly detailed chassis with vacuum tanks, battery boxes and brake linkages all to a high degree of fidelity 9ft bogie bolster with dicast side frames and split axles for electrical pick up Highly detailed interior with period specific decorations being applied Technical Specification:  Kinematic couplings with NEM pockets including special coupling bar to give close coupling Coaches are capable of negotiating R2 radius curves Sprung metal buffers Heavy Diecast chassis Internal lighting. Can be optionally DCC fitted with a six pin decoder such as the Dapol Imperium 5. - OO Scale

Dapol HIA Hopper (Early Build) Freightliner White 369025 (OO)

HIA Hopper (Early Build) Freightliner White 369025 The HIA limestone hopper was designed for the haulage of limestone, stone and sand and was introduced in 2005 for exclusive operation by Freightliner Heavy Haul Limited. 122 HIA limestone hoppers were manufactured by Wagony Swidinica in Poland. The HIA limestone hopper was 14 metres long with a maximum carrying capacity of 90 tonnes. The wagons worked all over England, typically transporting limestone from Derbyshire (Dowlow) to Yorkshire, Kent, Cambridgeshire, Norfolk and Lancashire.  Features: Finely applied livery with accurately printed detail  Highly level of detail Profiled wheels for exceptionally smooth running NEM pockets with self-centring couplings    - OO Scale

Dapol Dogfish Ballast Hopper BR 'Dutch' DB983174 (N)

Dogfish Ballast Hopper BR 'Dutch' DB983174 The Catfish and Dogfish were BR’s standard small ballast hopper wagons, almost 2000 being built between 1955-1961. Measuring in with a 14ft wheelbase, they were 22ft 6in over headstocks. The Dogfish was designed to carry 24 Tons of ballast. All were fitted with vacuum brakes from new, many lasted into the 1990s while a programme to fit air-brakes to surviving Dogfish wagons was started in 2000. Despite this, the last examples types were withdrawn in 2006. Many have survived into preservation.  Features: Finely moulded body with many separately added details  Accurately applied livery and painted details  NEM pockets with self centring couplings    - N Scale

Dapol Dogfish Ballast Hopper BR 'Dutch' Mainline Logos DB983192 (N)

Dogfish Ballast Hopper BR 'Dutch' Mainline Logos DB983192 The Catfish and Dogfish were BR’s standard small ballast hopper wagons, almost 2000 being built between 1955-1961. Measuring in with a 14ft wheelbase, they were 22ft 6in over headstocks. The Dogfish was designed to carry 24 Tons of ballast. All were fitted with vacuum brakes from new, many lasted into the 1990s while a programme to fit air-brakes to surviving Dogfish wagons was started in 2000. Despite this, the last examples types were withdrawn in 2006. Many have survived into preservation.  Features: Finely moulded body with many separately added details  Accurately applied livery and painted details  NEM pockets with self centring couplings    - N Scale

Dapol Dogfish Ballast Hopper BR Black 983233 (N)

Dogfish BR Black 983233 The Catfish and Dogfish were BR’s standard small ballast hopper wagons, almost 2000 being built between 1955-1961. Measuring in with a 14ft wheelbase, they were 22ft 6in over headstocks. The Dogfish was designed to carry 24 Tons of ballast. All were fitted with vacuum brakes from new, many lasted into the 1990s while a programme to fit air-brakes to surviving Dogfish wagons was started in 2000. Despite this, the last examples types were withdrawn in 2006. Many have survived into preservation.  Features: Finely moulded body with many separately added details  Accurately applied livery and painted details  NEM pockets with self centring couplings    - N Scale

Dapol Dogfish Ballast Hopper BR Black 992769 (N)

Dogfish Ballast Hopper BR Black 992769 The Catfish and Dogfish were BR’s standard small ballast hopper wagons, almost 2000 being built between 1955-1961. Measuring in with a 14ft wheelbase, they were 22ft 6in over headstocks. The Dogfish was designed to carry 24 Tons of ballast. All were fitted with vacuum brakes from new, many lasted into the 1990s while a programme to fit air-brakes to surviving Dogfish wagons was started in 2000. Despite this, the last examples types were withdrawn in 2006. Many have survived into preservation.  Features: Finely moulded body with many separately added details  Accurately applied livery and painted details  NEM pockets with self centring couplings    - N Scale

Dapol Dogfish Ballast Hopper BR Olive DB983195 (N)

Dogfish Ballast Hopper BR Olive DB983195 The Catfish and Dogfish were BR’s standard small ballast hopper wagons, almost 2000 being built between 1955-1961. Measuring in with a 14ft wheelbase, they were 22ft 6in over headstocks. The Dogfish was designed to carry 24 Tons of ballast. All were fitted with vacuum brakes from new, many lasted into the 1990s while a programme to fit air-brakes to surviving Dogfish wagons was started in 2000. Despite this, the last examples types were withdrawn in 2006. Many have survived into preservation.  Features: Finely moulded body with many separately added details  Accurately applied livery and painted details  NEM pockets with self centring couplings    - N Scale

Dapol Dogfish Ballast Hopper BR Olive DB993592 (N)

Dogfish Ballast Hopper BR Olive DB993592 The Catfish and Dogfish were BR’s standard small ballast hopper wagons, almost 2000 being built between 1955-1961. Measuring in with a 14ft wheelbase, they were 22ft 6in over headstocks. The Dogfish was designed to carry 24 Tons of ballast. All were fitted with vacuum brakes from new, many lasted into the 1990s while a programme to fit air-brakes to surviving Dogfish wagons was started in 2000. Despite this, the last examples types were withdrawn in 2006. Many have survived into preservation.  Features: Finely moulded body with many separately added details  Accurately applied livery and painted details  NEM pockets with self centring couplings    - N Scale

Dapol Class 144 144011 West Yorkshire PTE Metro Red/Cream (N)

Class 144 011 West Yorkshire PTE Metro Red/Cream Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 144 144013 Regional Railways (N)

Class 144 013 Regional Railways Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143001 BR Provincial Light Blue (N)

Class 143 001 BR Provincial Light Blue Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143602 Arriva Blue Transport For Wales (N)

Class 143 602 Arriva Blue Transport For Wales Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143609 Arriva Trains Wales Turquoise (N)

Class 143 609 Arriva Trains Wales Turquoise Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143620 GWR Green (N)

Class 143 620 GWR Green Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 143 143621 First Great Western Local Lines (N)

Class 143 621 First Great Western Local Lines Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Class 144 144004 Northern Rail Blue/Purple (N)

Class 144 004 Northern Rail Blue/Purple Features: A powered and a dummy car in each set All-new super-detailed bodywork with flush glazing Separate handrails, wipers and exhaust pipes Correct underframes for Class 143 and Class 144 NEM Pockets Tooling variants for front end and roof differences (original and combined light clusters / With or without radio pod) Scharfenberg-style end coupling compatible with our Class 142, 153 and 156 units. Finely applied detail and decoration Close coupling with extendable corridor connections Electrical through coupling for improved running All wheel drive on the powered car NEXT 18 DCC Decoder Socket Light-Bar ready Directional lights on both cars, independently controllable internal (where fitted) and external lighting  - N Scale

Dapol Kitmaster Platform Ramp Edging Stone Set

Kitmaster Platform Ramp Edging Stone Set - Platform Edging Stones – Ramp Pack3 pack of platform edging with 1 x LH Ramp, 1 x RH Ramp, 1 x Straight.Ramp pieces. Width = 21.5mm·  Ramp Angle = 171.5°· Downward length = 188.5mm· Straight Section = 42mmStraight Piece is 21.5mm x 294mm                      - Note only the edging stones/slabs are sold, brickwork and pathing surfaces are not supplied    - O Scale

Dapol Kitmaster Posable Station Doors Green

Kitmaster Posable Station Doors Green - Double Doors hole size = 34mm wide x 54mm high   - Single Door hole size = 21mm wide x 45mm high.   - All of the doors are Posable / openable.  - They come with a glazing panel  to fit into the window apertures  - All necessary door frames are supplied and a jig to help drill the locating holes for the door “hinges” to locate into. - O Scale

Dapol Kitmaster Round 4 Pane Sash Windows (6)

Kitmaster Round 4 Pane Sash Windows (6)                   - 4 Pane Sash WindowsHole size = 28mm wide x 47mm high                 - Sash windows are Posable  - They come with a glazing panel  to fit into the window apertures - O Scale

Dapol Kitmaster Round Top Industrial Windows (6)

Kitmaster Round Top Industrial Windows (6)             - Round Top Industrial WindowsHole size = 28mm wide x 47mm high                      - They come with a glazing panel  to fit into the window apertures - O Scale

Dapol Kitmaster Straight Platform Edging Stones (3)

Kitmaster Straight Platform Edging Stones (3) - Platform Edging Stones - Straight3 pack of platform edging, each section is 21.5mm wide x 294mm length  - Note only the edging stones/slabs are sold, brickwork and pathing surfaces are not supplied    - O Scale

Dapol Kitmaster Stretcher Bond Brick Sheets 310 X 84mm (4)

Kitmaster Stretcher Bond Brick Sheets 310 X 84mm (4)  - 310 x 84 Stretcher Bond Brick Sheets Each pack includes 4 sheets of card                         - Fully textures surface  - Bricks have recessed mortar joints  - O Scale    

Dapol Streamlined Diesel Railcar W11 BR Chocolate/Cream (O)

Streamlined Diesel Railcar W11 BR Chocolate/Cream Locomotive Information: The first diesel railcar was introduced by the GWR in 1933. The innovation was to prove extremely successful and they continued in operation well into the 1960s when their use was eclipsed by the introduction of the BR first generation DMUs. The railcars art deco air smoothed styling has lead to their nickname of Flying Banana although later variants were produced to a more angular style. In all 38 GWR diesel railcars were produced from 1933 to 1942 at three different sites with three surviving into preservation. Includes: - Operating Directional lighting - Operating passenger compartment lighting which includes working wall lights - Cab light - On appropriate models the lamp bracket can be exchanged for a working tail lamp for prototypical running - Easy DCC fitting via removable plate. - 21 PIN DCC Ready  - Detailed cab interior - Removable gearbox covers (supplied in accessory pack) - Decorated seating - Flush glazing with a single window posed in the slid open position for passenger ventilation - Sliding luggage doors - Vestigial buffers - All wheel pick up - Engineered for passenger inclusion - Suitable for Radius 2 curves - O Gauge (1:43 Scale)

Dapol Kitmaster Windmill Kit

Windmill Kit The kit can be designed to be operational and would require a suitable electric motor to turn the sails (Faller) Also ideal for any Thomas the Tank Engine enthusiasts - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Telegraph Poles Kit

Telegraph Poles Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Thatched Cottage Kit

Thatched Cottage Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Turntable Kit

Turntable Kit - Makes typical steam era turntable (GWR Design) - Designed to build on flat baseboard and build the tracks up to the Turntable deck height - Manual turning as built or can be motorised using "Meccano" Gears and a handle or suitable electric motor kit (Peco/ Expo tools) - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Twin Silo Wagon Kit

Twin Silo Wagon Kit - Plastic Kit requires glue and paint to complete (NOT included) - OO Scale

Dapol Kitmaster Station Accessories Kit

Station Accessories Kit Includes - Passengers/station staff - luggage and trolleys - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Station Platform Kit

Station Platform Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Stephensons Rocket Static Locomotive Kit

Stephenson's Rocket Static Locomotive Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Signal Box Kit

Signal Box Kit This famous kit is based on the Signal Box at Oakham on the Peterborough-Stamford Line in Rutland, which is preserved today as a Grade 1 listed building. The design also makes up a typical "Midland" type signal box. - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Signal Gantry Kit

Signal Gantry Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Railway Workmen Kit

Railway Workmen Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Refrigerated Van Kit

Kitmaster Refrigerated Van Kit - OO Scale

Dapol Kitmaster Shop & Flat Kit

Shop & Flat Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Meat Van Kit

Kitmaster Meat Van Kit - OO Scale

Dapol Kitmaster Platform Fittings Kit

Platform Fittings Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Presflo Cement Wagon Kit

Presflo Cement Wagon Kit - Plastic Kit requires glue and paint to complete and enhance (NOT included) - Couplings and Metal wheels included - OO Scale

Dapol Kitmaster Pub Sign & Horse Trough Kit

Pub Sign & Horse Trough Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Level Crossing Kit

Level Crossing Kit - Plastic kit - Requires glue and paint to complete NOT included - OO Scale

Dapol Kitmaster General Stores Kit

General Stores Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Girder Bridge Kit

Girder Bridge Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Cattle Wagon Kit

Kitmaster Cattle Wagon Kit - OO Scale

Dapol Kitmaster Detached Bungalow Kit

Detached Bungalow Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Detached House Kit

Detached House Kit - Plastic kit requires glue and paint to complete and enhance (NOT included)

Dapol Kitmaster 20t BP Tank Wagon Kit

20t BP Tank Wagon Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Kitmaster Booking Hall Kit

Booking Hall Kit - Plastic kit requires glue and paint to complete and enhance detail (NOT included) - OO Scale

Dapol Imperium 21 Pin 8 Function Decoder

Dapol - Imperium 21 Pin 8 Function Decoder

Dapol Imperium 21 Pin MTC 6 Function Decoder

Dapol - Imperium 21 Pin MTC 6 Function Decoder