Accurascale BR Mk2C FK M13520 Blue/Grey InterCity (OO)

BR Mk2C FK M13520 Blue/Grey InterCity (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C FK M13527 Provincial Trans-Pennine (OO)

BR Mk2C FK M13527 Provincial Trans-Pennine (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5505 Regional Railways (OO)

BR Mk2C TSO 5505 Regional Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5520 Provincial (Unbranded) (OO)

BR Mk2C TSO 5520 Provincial (Unbranded) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5525 Network SouthEast (OO)

BR Mk2C TSO 5525 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5569 Maroon (South Wales & West) (OO)

BR Mk2C TSO 5569 Maroon (South Wales & West) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO M5561 Blue/Grey InterCity (OO)

BR Mk2C TSO M5561 Blue/Grey InterCity (OO)Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) 6501 Network SouthEast (OO)

BR Mk2C TSO(T) 6501 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO)

BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C FK 13514 Network SouthEast (OO)

BR Mk2C FK 13514 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BFK 17120 Network SouthEast w/ WoE Route Branding (OO)

BR Mk2C BFK 17120 Network SouthEast w/ WoE Route Branding (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BFK IC17177C InterCity Executive (OO)

BR Mk2C BFK IC17177C InterCity Executive (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSK (exBFK) 35506 Regional Railways (OO)

BR Mk2C BSK (exBFK) 35506 Regional Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSK (exBFK) 35508 West Coast Railways (OO)

BR Mk2C BSK (exBFK) 35508 West Coast Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSO 9440 South Wales & West Blue (OO)

BR Mk2C BSO 9440 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5453 South Wales & West Blue (OO)

BR Mk2B TSO 5453 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5463 Maroon (South Wales & West) (OO)

BR Mk2B TSO 5463 Maroon (South Wales & West) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5491 South Wales & West Blue (OO)

BR Mk2B TSO 5491 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale Class 50 50035 'Ark Royal' BR Blue (SF)

Class 50 50035 'Ark Royal' BR Blue (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof

Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof (SF)

Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50029 'Renown' Revised NSE w/WofE Branding

Class 50 50029 'Renown' Revised NSE w/WofE Branding Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50029 'Renown' Revised NSE w/WofE Branding (SF)

Class 50 50029 'Renown' Revised NSE w/WofE Branding (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50035 'Ark Royal' BR Blue

Class 50 50035 'Ark Royal' BR Blue Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50019 'Ramillies' BR Laira Departmental Blue

Class 50 50019 'Ramillies' BR Laira Departmental Blue Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50019 'Ramillies' BR Laira Departmental Blue (SF)

Class 50 50019 'Ramillies' BR Laira Departmental Blue (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale 13T Clayhood (Unfitted) BR Grey Triple Pack (Pack A)

13T Clayhood (Unfitted) BR Grey Triple Pack (Pack A) BR built a total of 875 of these Kernow icons across several batches from 1954 up until 1960. The "Clayhoods were built to complement and eventually replace the GWR O.13 clay wagons  Running in short branchline trains all the way up to 50 wagon mega block trains, this staple of Cornish railway scene were withdrawn and replaced by the air braked CDA wagons in 1988. - OO Scale

Accurascale 13T Clayhood (Unfitted) BR Grey Triple Pack (Pack B)

13T Clayhood (Unfitted) BR Grey Triple Pack (Pack B) BR built a total of 875 of these Kernow icons across several batches from 1954 up until 1960. The "Clayhoods were built to complement and eventually replace the GWR O.13 clay wagons  Running in short branchline trains all the way up to 50 wagon mega block trains, this staple of Cornish railway scene were withdrawn and replaced by the air braked CDA wagons in 1988. - OO Scale

Accurascale PTA BSc Consett/Teesside (pre-TOPS) Pack 1 (Inners & Outers)

PTA BSc Consett/Teesside (pre-TOPS) Pack 1 (Inners & Outers)  Includes: 2548 Outer  2513 Inner 2514 Inner 2515 Inner 2559 Outer  - Working Tail Lamp - OO Scale

Accurascale PTA BSc Consett/Teesside (pre-TOPS) Pack 2 (Inners)

PTA BSc Consett/Teesside (pre-TOPS) Pack 2 (Inners) Includes: 2466 Inner 2516 Inner 2517 Inner 2518 Inner 2519 Inner - OO Scale

Accurascale PTA BSc South Wales Grey Pack 1 (Inners & Outers)

PTA BSc South Wales Grey Pack 1 (Inners & Outers) Includes: BSSW 26669 Outer  BSSW 26567 Inner BSSW 26586 Inner BSSW 26646 Inner BSSW 26677 Outer  - Working Tail Lamp - OO Scale

Accurascale PTA Foster Yeoman Silver (CAIB) Pack 1 (Inners & Outers)

PTA Foster Yeoman Silver (CAIB) Pack 1 (Inners & Outers) Includes: PR 26543  PR 26452  PR 26476  PR 26534  PR 26555 - Working Tail Lamp - OO Scale

Accurascale PTA Foster Yeoman Silver (CAIB) Pack 2 (Inners)

PTA Foster Yeoman Silver (CAIB) Pack 2 (Inners) Includes: PR 26466  PR 26500  PR 26509  PR 26515  PR 26540  - OO Scale

Accurascale Class 31 31271 Triple Grey Construction

Class 31 31271 Triple Grey Construction Features: 21-Pin DCC Decoder Socket Stay-Alive Power Pack Motorised Working Fan Directional lighting, DC and DCC Lighting clusters with appropriate day and night-time settings Switchable Red and white marker lights (red can be switched individual lights or both on) Separately switched cab lighting and illuminated, driver’s desk with auto/off on movement - OO Scale

Accurascale Class 31 31271 Triple Grey Construction (Sound Fitted)

Class 31 31271 Triple Grey Construction (Sound Fitted) Features: 21-Pin DCC Decoder Socket Stay-Alive Power Pack Motorised Working Fan Directional lighting, DC and DCC Lighting clusters with appropriate day and night-time settings Switchable Red and white marker lights (red can be switched individual lights or both on) Separately switched cab lighting and illuminated, driver’s desk with auto/off on movement - OO Scale

Accurascale Class 31 31301 BR Railfreight Red-Stripe

Class 31 31301 BR Railfreight Red-Stripe Features: 21-Pin DCC Decoder Socket Stay-Alive Power Pack Motorised Working Fan Directional lighting, DC and DCC Lighting clusters with appropriate day and night-time settings Switchable Red and white marker lights (red can be switched individual lights or both on) Separately switched cab lighting and illuminated, driver’s desk with auto/off on movement - OO Scale

Accurascale Class 31 31301 BR Railfreight Red-Stripe (Sound Fitted)

Class 31 31301 BR Railfreight Red-Stripe (Sound Fitted) Features: 21-Pin DCC Decoder Socket Stay-Alive Power Pack Motorised Working Fan Directional lighting, DC and DCC Lighting clusters with appropriate day and night-time settings Switchable Red and white marker lights (red can be switched individual lights or both on) Separately switched cab lighting and illuminated, driver’s desk with auto/off on movement - OO Scale

Accurascale Class 31 31602 'Chimaera' Fragonset

Class 31 31602 'Chimaera' Fragonset Features: 21-Pin DCC Decoder Socket Stay-Alive Power Pack Motorised Working Fan Directional lighting, DC and DCC Lighting clusters with appropriate day and night-time settings Switchable Red and white marker lights (red can be switched individual lights or both on) Separately switched cab lighting and illuminated, driver’s desk with auto/off on movement - OO Scale

Accurascale Class 31 31602 'Chimaera' Fragonset (Sound Fitted)

Class 31 31602 'Chimaera' Fragonset (Sound Fitted)  Features: 21-Pin DCC Decoder Socket Stay-Alive Power Pack Motorised Working Fan Directional lighting, DC and DCC Lighting clusters with appropriate day and night-time settings Switchable Red and white marker lights (red can be switched individual lights or both on) Separately switched cab lighting and illuminated, driver’s desk with auto/off on movement - OO Scale

Accurascale Class 30 D5501 BR Green

Class 30 D5501 BR Green Features: 21-Pin DCC Decoder Socket Stay-Alive Power Pack Motorised Working Fan Directional lighting, DC and DCC Lighting clusters with appropriate day and night-time settings Switchable Red and white marker lights (red can be switched individual lights or both on) Separately switched cab lighting and illuminated, driver’s desk with auto/off on movement - OO Scale

Accurascale HTV Hopper BR Bauxite - Pack K

HTV Hopper BR Bauxite - Pack K Features: Minimum Radius 438mm (2nd Radius Set-track) Weight 35g minimum Die-cast chassis for ideal weight RP25-110 profile OO gauge wheels with separate brake blocks in line with tread Sprung metal buffers and dummy instanter couplings Super fine plastic parts, incl. brake gear, lamp irons, handrails, hopper door operating equipment, etc. Removable, Kinetic NEM coupler mounts at correct height with mini-tension-lock couplers provided with scale Instanters included 2mm diameter axles that are 26mm over pinpoints - OO Scale

Accurascale Class 37 37903 BR Railfreight Grey Large Logo

Class 37 37903 BR Railfreight Grey Large Logo Features: Provided DCC ready [21Pin MTX Socket] Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound as well as independently controlled, smooth coreless motorised fan. Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights Heavy die-cast metal chassis High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam - OO Scale

Accurascale Class 37 37903 BR Railfreight Grey Large Logo - DCC Sound

Class 37 37903 BR Railfreight Grey Large Logo - DCC Sound Features: Provided Factory DCC Sound Fitted [ESU LokSound 5] ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound as well as independently controlled, smooth coreless motorised fan. Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights Heavy die-cast metal chassis High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam - OO Scale

Accurascale Class 37 37902 'British Steel Llanwern' Triple Grey Metals

Class 37 37902 'British Steel Llanwern' Triple Grey Metals Sector Features: Provided DCC ready [21Pin MTX Socket] Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound as well as independently controlled, smooth coreless motorised fan. Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights Heavy die-cast metal chassis High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam - OO Scale

Accurascale Hunslet Austerity VF5300 NCB North East 59

Hunslet Austerity VF5300 NCB North East 59 This Austerity was another wartime product, this time from the Vulcan foundry, Newton-le-Willows. It was completed in 1945 and allocated the WD number 75310. Following war dept service, the locomotive was purchased by the NCB and allocated to number 6 area, North West Durham. Particular to this area is the cut back cabs on all locomotives for working the restricted clearance of the tunnel on the entrance to Lambton coal drops at the port of Sunderland. Another smaller feature on this locomotive was the relocation of the injectors to above the running plate ahead of the cab. Both of these features are faithfully recreated on the model Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Accurascale Hunslet Austerity WGB2762 United Steel Company 18

Hunslet Austerity WGB2762 United Steel Company 18 This attractively liveried Austerity was built in 1945 by W. G. Bagnall in Stafford and was one of the 377 locomotives built for the War Department and originally carried the number 75174. When demobbed, the locomotives was purchased by the United Steel Companies and put to work on the steelworks system at Scunthorpe. Externally a virtually standard Austerity, our model carries the heavy duty “Yorkshire” buffers that were fitted to the prototype when it was in service. Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Accurascale Hunslet Austerity HC1775 BR Black Early Emblem 68025

Hunslet Austerity HC1775 BR Black Early Emblem 68025 This locomotive was one of a batch of 36 Austerities by Hudswell Clarke of Leeds. This particular one was completed in November 1944 and carried the WD number 71498. Purchased by the LNER in June 1946 the locomotive was classified as a J94 and numbered 8025. The distinctive extended bunker was fitted in November 1949 when it was renumbered 68025 and gained the early BR emblem. The locomotive was based at Darlington 51A until withdrawal in 1963. The locomotive did not survive and was cut up shortly after. The model replicates the period after 1949 and carries the extended bunker, smokebox numberplate and additional steps and handrails on the tank Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Accurascale Hunslet Austerity HC1775 BR Black Early Emblem 68025 - DCC Sound

Hunslet Austerity HC1775 BR Black Early Emblem 68025 - DCC Sound This locomotive was one of a batch of 36 Austerities by Hudswell Clarke of Leeds. This particular one was completed in November 1944 and carried the WD number 71498. Purchased by the LNER in June 1946 the locomotive was classified as a J94 and numbered 8025. The distinctive extended bunker was fitted in November 1949 when it was renumbered 68025 and gained the early BR emblem. The locomotive was based at Darlington 51A until withdrawal in 1963. The locomotive did not survive and was cut up shortly after. The model replicates the period after 1949 and carries the extended bunker, smokebox numberplate and additional steps and handrails on the tank Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Accurascale GWR 8750, 8763 BR Early Emblem Lined Black - DCC Sound

GWR 8750, 8763 BR Early Emblem Lined Black - DCC Sound Features: Highly detailed 0-6-0PT 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, buffer pipework, lamp irons etc. Turned brass whistles etched whistle shields (where fitted) Sliding roof ventilator Etched metal pre-painted number plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door Flickering Firebox Installed Stay Alive Power Pack Fitted - OO Scale

Accurascale Class 66 66302 Fastline - DCC Sound

Class 66 66302 Fastline - DCC Sound 66302 arrived in the uk as part of a “mixed delivery” of class 66 low emission models, alongside locos for Freightliner and DRS aboard the MV Stellanova on the 8th November 2006. Following unloading and acceptance it worked its first train of HYA’s on the 13th November. When Jarvis went in to administration, Fastline’s small fleet of class 66 locomotives were acquired by DRS before being repainted into their house colours Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 37 37429 'Eisteddfod Genedlaethol' BR Large Logo

Class 37 37429 'Eisteddfod Genedlaethol' BR Large Logo Representing the original Cardiff Canton batch of six Class 37/4 conversions is No. 37429, ‘refurbished’ by Crewe Works from No. 37300 (originally D6600) in March 1986. Nos. 37426-37431 were originally planned to join the rest of the sub class on the Scottish Region. However, before they were completed the London Midland identified a more pressing need for this batch, although they were allocated to Canton in South Wales due to this depot’s extensive knowledge of the English Electric Type 3s. The introduction of Electric Train Heat (ETH) fitted locomotives to the restricted weight Cambrian route from Wolverhampton to the Welsh coast allowed InterCity to supplement its tired Mk.1 fleet on London Euston to Aberystwyth and Pwllheli services with air-conditioned Mk.2 coaches, although Mk.1s – often Network SouthEast liveried sets – were still regulars on the summer-dated trains into the 1990s. Unlike their cousins north of the border, the Welsh ‘37/4s’ were primarily passenger machines and they also found themselves allocated to Liverpool Lime St/Manchester Piccadilly/North Wales-Cardiff and Cardiff-Bristol-Weymouth diagrams. Outshopped in large logo livery, it soon gained a small red Welsh dragon logo on the driver’s cabsides, and later acquired the Sir Dyfed / County of Dyfed nameplates from No. 37180 in April 1987. However, they were removed after just four months and the locomotive was renamed Eisteddfod Genedlaethol – after the famous festival – in the August. In January 1991 it was released from Glasgow St Rollox Works in Railfreight Construction colours, and notably retained its red-backed nameplates like the other three ‘37/4s’ to gain these particular squadron decals. It kept its name on its Regional Railways repaint in May 1993 and was stored in 2001. It was disposed of at EMR Kingsbury in February 2008. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37414 Triple Grey Construction Sector

Class 37 37414 Triple Grey Construction Sector The introduction of Class 156 ‘Super Sprinters’ on the West Highland from January 1989 and on the Far North/Kyle lines in the May triggered an exodus of Class 37/4s to freight work. By the end of that year, Laira, Motherwell and Tinsley had gained allocations, while Immingham and Thornaby both acquired three locos each in the middle of 1990, by which point half the sub class were south of the border. One of these was No. 37414, which was on china clay duties in Cornwall until transferred to the North Lincolnshire depot’s FABI pool that September. This loco, which retained its Western Region-style lamp irons at the No.2 end only, had been repainted in the Roundel triple grey scheme with Distribution decals in August 1989, but quickly swapped these for more appropriate Construction brandings after its move. This saw it mostly outbased at Buxton in the Peak District to haul aggregates, cement and the iconic ICI limestone trains.While it wasn’t completely allergic to passenger work during this period, it moved to Crewe Diesel in November 1992 to join the RCMC Regional Railways North West pool, initially to work Liverpool Lime St/Crewe-Cardiff trains, still wearing its classic Railfreight image. In March 1993 it became the first member of the fleet to receive the new Regional Railways livery along with the name Cathays C&W Works 1846-1993, becoming a stalwart of the North Wales coast and the famed ‘club’ trains from Liverpool and Manchester Victoria. It soldiered on until it was stored by EWS in March 2000 and was scrapped at TJ Thomson’s of Stockton exactly nine years later. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37421 Colas

Class 37 37421 Colas Stored by EWS at Motherwell in March 2005 and sold for preservation at the Pontypool & Blaenavon Railway in 2009, No. 37421 was one of four Class 37s that was purchased by Colas Rail in 2013 for a return to the main line, along with Nos. 37116, 37175 and 37219. While the latter pair debuted for their new owner in the middle of 2014, it would be another year before No. 37421 would re-enter traffic along with BR green-liveried former Harry Needle Class 37/0 No. 37057/D6757, just in time to assist on the newly acquired Network Rail infrastructure monitoring contract. For the next four years, the Colas Class 37/4 was a solid performer on various test formations, until called to South Wales in May 2019 to provide power for Cardiff-Rhymney line commuter turns along with hired-in Nos. 37025 and 37418. This followed a fallow few months when the locomotive was under repair and eventually returned after a bogie swap with No. 37175. The Rhymney workings ended in March 2020 and it was back to test train work, mixed in with NR saloon duties with No. 975025 Caroline and the odd infrastructure duty. Cosmetically, towards the end of that same year it swapped its Colas ‘hard hat’ logos for new diamond stickers, although it has stubbornly retained its unique arrangement of single lamp irons on different sides of the locomotive at each end. Despite the increasing number of Colas HST power cars on the NR services, No. 37421 is still a regular atop PLPR (Plain Line Pattern Recognition) and UTU (Ultrasonic Testing Unit) formations and is expected to remain a key component of the operator’s fleet for several years to come. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37408 'Loch Rannoch' EWS

Class 37 37408 'Loch Rannoch' EWS Arguably the most popular of the Class 37/4s in the British Rail and early privatisation era, No. 37408 Loch Rannoch clinged obstinately to its large logo paint scheme – the last so adorned – until being called to Toton in mid-1998 for a repaint. Following a protracted overhaul, which included a new toughened centre window, it debuted in the revised maroon and gold of its owner EWS, sans-nameplates, in November and wasn’t reunited with its famous name until the following February. Over the next seven years, the former No. 37289 (built as D6989) was a regular performer on loco-hauled services around the country, particularly Birmingham/Crewe-Bangor/Holyhead, Cardiff-Fishguard/Rhymney and Crewe/Manchester, Leeds-Carlisle/Knaresborough and even in Scotland on the Fort William sleeper. It could also be found on a wide variety of freight and even Railtrack/Network Rail test trains and was variously allocated to Crewe Diesel, Motherwell, Cardiff Canton, Toton and Margam during this period.Outshopped in the same livery in March 2002, its rock star status meant that it was never long before it gained various accoutrements, including regular bouts of Eastfield ‘Westies’, silver buffers, white lamp irons, black headcode panels and even Immingham 40B shedplates. It seemed inevitable that Rannoch would return to large logo in due course and would have been a favourite for preservation, but after running away and colliding with its stabled rake of coaches at Rhymney on 1 August 2005 the locomotive was stored and repairs were not authorised. It was eventually scrapped at EMR Kingsbury in January 2008. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 66 66789 'British Rail 1948 - 1997' GBRF BR Large Logo

Class 66 66789 'British Rail 1948 - 1997' GBRF BR Large Logo Arriving in the uk aboard MV Fairload on the 23rd June 2000, this locomotive was originally numbered 66250 and was the last EWS class 66 as part of their “red revolution” which had started with 66001 just a few years earlier. As part of a restructuring, EWS offered several locomotives for sale and 66250 was quired by GBRF in 2017 and was allocated the new number 66789. Unveiled on the 27th Feb 2018, 66789 sports a homage to the British Rail large logo blue livery to commemorate the 70th anniversary of the formation of British Railways back in 1948. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66849 'Wylam Dilly' Colas

Class 66 66849 'Wylam Dilly' Colas 66849 Started life as a Freightliner Machine numbered: 66576 and was originally named: 'Hamburg Sud Advantage', it was taken off lease from freightliner in 2011 and was taken by Colas quickly afterwards and was named 'Wylam Dilly' and is still to this day. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66421 'Gresty Bridge TMD' DRS - DCC Sound

Class 66 66421 'Gresty Bridge TMD' DRS - DCC Sound One engine that hasn’t changed operators was DRS owned 66421. This particular locomotive was delivered on the 9th September 2007. Originally carrying the DRS compass livery, the locomotive was soon put to work on a variety of the companies trains.66421 was refreshed with the new simplified DRS livery during 2015 and ran unnamed until 2018 when it featured at the DRS Crewe Gresty Bridge TMD open day where it was named after the depot. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66724 'Drax Power Station' GBRF

Class 66 66724 'Drax Power Station' GBRF  Another locomotive that was transported on the MV Fairload was GBRF’s 66724. Arriving on the 20th December 2006, this locomotive originally sported the “First group” rendition of GBRF livery ahead of the press launch on the 8th January 2007 at Old Oak Common. 66724 gained its nameplates “Drax Power Station” later the same year. Surviving in much the same condition for a decade, 66724 was given a fresh coat of GBRF’s now standard dark blue in 2017. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66789 'British Rail 1948 - 1997' GBRF BR - DCC Sound

Class 66 66789 'British Rail 1948 - 1997' GBRF BR Large Logo - DCC Sound Arriving in the uk aboard MV Fairload on the 23rd June 2000, this locomotive was originally numbered 66250 and was the last EWS class 66 as part of their “red revolution” which had started with 66001 just a few years earlier. As part of a restructuring, EWS offered several locomotives for sale and 66250 was quired by GBRF in 2017 and was allocated the new number 66789. Unveiled on the 27th Feb 2018, 66789 sports a homage to the British Rail large logo blue livery to commemorate the 70th anniversary of the formation of British Railways back in 1948. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66142 'Maritime Intermodal Three' DB - DCC Sound

Class 66 66142 'Maritime Intermodal Three' DB Maritime Blue - DCC Sound Once an anonymous EWS maroon and gold class 66, 66142 led the life of a typical EWS 66 from its delivery during August 1999 right through the acquisition by DB up until its turn in the paintshop came in 2019 at the ripe age of 20 years old! Rather than the bright red of DB, 66142 gained the vibrant blue colour of Maritime Intermodal and was named “Maritime Intermodal Three”. Following Accurascale handing out free 'a' stickers at Warley in 2022, a number of these have found their way in to a wide variety of places, including on real rolling stock. 66142 is one such locomotive and proudly wears its 'a' sticker under one set of numbers Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66142 'Maritime Intermodal Three' DB Maritime Blue

Class 66 66142 'Maritime Intermodal Three' DB Maritime Blue Once an anonymous EWS maroon and gold class 66, 66142 led the life of a typical EWS 66 from its delivery during August 1999 right through the acquisition by DB up until its turn in the paintshop came in 2019 at the ripe age of 20 years old! Rather than the bright red of DB, 66142 gained the vibrant blue colour of Maritime Intermodal and was named “Maritime Intermodal Three”. Following Accurascale handing out free 'a' stickers at Warley in 2022, a number of these have found their way in to a wide variety of places, including on real rolling stock. 66142 is one such locomotive and proudly wears its 'a' sticker under one set of numbers Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66302 Fastline

Class 66 66302 Fastline 66302 arrived in the uk as part of a “mixed delivery” of class 66 low emission models, alongside locos for Freightliner and DRS aboard the MV Stellanova on the 8th November 2006. Following unloading and acceptance it worked its first train of HYA’s on the 13th November. When Jarvis went in to administration, Fastline’s small fleet of class 66 locomotives were acquired by DRS before being repainted into their house colours Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66414 Freightliner Powerhaul

Class 66 66414 Freightliner Powerhaul 66414 was originally leased to DRS and this is how it arrived fresh from the factory aboard MV fairlift on the 16th October 2006. When that lease expired, DRS did not renew leaving the locomotive available for transfer to Freightliner. Perhaps better known for its spell as “James the Engine” in Stobart livery, it gained the new “powerhaul” version of freightliner livery in 2015 and this is how it remains to this day. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66414 Freightliner Powerhaul - DCC Sound

Class 66 66414 Freightliner Powerhaul - DCC Sound 66414 was originally leased to DRS and this is how it arrived fresh from the factory aboard MV fairlift on the 16th October 2006. When that lease expired, DRS did not renew leaving the locomotive available for transfer to Freightliner. Perhaps better known for its spell as “James the Engine” in Stobart livery, it gained the new “powerhaul” version of freightliner livery in 2015 and this is how it remains to this day. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66421 'Gresty Bridge TMD' DRS

Class 66 66421 'Gresty Bridge TMD' DRS One engine that hasn’t changed operators was DRS owned 66421. This particular locomotive was delivered on the 9th September 2007. Originally carrying the DRS compass livery, the locomotive was soon put to work on a variety of the companies trains.66421 was refreshed with the new simplified DRS livery during 2015 and ran unnamed until 2018 when it featured at the DRS Crewe Gresty Bridge TMD open day where it was named after the depot. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale LNER J69 359 (7359) LNER Lined Black - DCC Sound

LNER J69 359 (7359) LNER Lined Black - Sound Fitted Includes: - SOUND FITTED VERSION   - NOTE: To use this model, you MUST have a Digital (DCC) Controller in order to operate functions. - Scale length of 110.66mm over headstocks, 36mm across body. - Minimum Radius Operation: 438mm (2nd radius set-track). - Die-cast metal chassis and boiler, target weight in the region of 260g-275g. - Factory fitted brake rigging. - All wheel pickup, DCC ready with stay alive arrangement. - Fully detailed cab area, with easily removable roof, fixed by magnets. - Fully detailed bunker area. - Moveable roof ventilator. - Eroded metal/plastic detail parts, including grab handles, steps, buffer pipework, lamp irons etc. - Brass turned whistles/valves fitted. - Etched metal pre-painted numberplates and plaques (where applicable). - Fully sprung metal buffers, factory-installed pipework, and screw couplings. - Accurate liveries including fully lined where applicable, and detailed crests/emblems. - Magnetically removable smoke box door for access to decoder. - Small, flexible neck NEM compliant coupler mounts set at correct height, with mini-tension-lock couplers. - Factory installed DCC Sound option, with two quality sugarcube speakers contained in sound capsules located for best possible sound, in the side tanks (DCC Sound models only). - Flickering/steady Firebox glow (depending on DCC fitting). - Large coreless motor, for a haulage capacity of not less than 1kg, from a standing start, on a 3% incline. - Helical gear box for maximum performance and slow speed running. - Gearing arranged so locomotive can achieve a scale maximum top speed of 50 mph (80 kmh). - OO Scale

Accurascale Late BR J68 68646 Plain Black - DCC Sound

Late BR J68 68646 Plain Black - Sound Fitted  Includes: - SOUND FITTED VERSION   - NOTE: To use this model, you MUST have a Digital (DCC) Controller in order to operate functions. - Scale length of 110.66mm over headstocks, 36mm across body. - Minimum Radius Operation: 438mm (2nd radius set-track). - Die-cast metal chassis and boiler, target weight in the region of 260g-275g. - Factory fitted brake rigging. - All wheel pickup, DCC ready with stay alive arrangement. - Fully detailed cab area, with easily removable roof, fixed by magnets. - Fully detailed bunker area. - Moveable roof ventilator. - Eroded metal/plastic detail parts, including grab handles, steps, buffer pipework, lamp irons etc. - Brass turned whistles/valves fitted. - Etched metal pre-painted numberplates and plaques (where applicable). - Fully sprung metal buffers, factory-installed pipework, and screw couplings. - Accurate liveries including fully lined where applicable, and detailed crests/emblems. - Magnetically removable smoke box door for access to decoder. - Small, flexible neck NEM compliant coupler mounts set at correct height, with mini-tension-lock couplers. - Factory installed DCC Sound option, with two quality sugarcube speakers contained in sound capsules located for best possible sound, in the side tanks (DCC Sound models only). - Flickering/steady Firebox glow (depending on DCC fitting). - Large coreless motor, for a haulage capacity of not less than 1kg, from a standing start, on a 3% incline. - Helical gear box for maximum performance and slow speed running. - Gearing arranged so locomotive can achieve a scale maximum top speed of 50 mph (80 kmh). - OO Scale

Accurascale SR Tadpole ex-D1479 Van - British Railways Departmental - Triple

SR Tadpole ex-D1479 Van - British Railways Departmental British Railways Departmental, Circuit Branded Tadpole Classification, Yellow Dot, fitted Head, Ex D1479 patterns Triple Pack includes: Wagon Numbers:   - TDS50812   - TDS50885   - TDS50846 Model Features: - Die-cast metal chassis with plastic body - 60g Weight per Wagon - Three styles of wheel design; Split spoke, single spoke and 3-hole disc - RP25.110 chemically blackened OO gauge wheel sets - Blackened brass bearings conforming to accurascale standards of 14.4mm back-to-back on 2mm axles over 26mm pinpoints.  - Eroded metal, plastic and wire detail parts, including, but not limited to, handrails, grab handles, door handles, lamp brackets, vacuum and steam pipes, though pipes, steam heating cock and break gear.  - Turned sprung metal buffers - NEM standard coupler pockets - Accessory Bag included contains steam/vacuum hoses and screw couplings - OO Scale Vehicle information: The Southern Railways Banana Vans, to Diagrams D1478 and D1479. Found throughout Britain from 1930's through to 1978. These could be seen alongside the Great Western Railway variant Y4 Banana Vans up and down the network. Examples have been preserved.

Accurascale SR Tadpole Mixed ex-1478/1479 Van - British Railways Departmenta

SR Tadpole Mixed ex-1478/1479 Van - British Railways Departmental Tadpole Classification, Yellow Dot, fitted Head Ex D1478 and D1479 pattern Triple Pack Includes: - Wagons Numbers:   - DS50708   - DS50693   - DS50832 Model Features: - Die-cast metal chassis with plastic body - 60g Weight per Wagon - Three styles of wheel design; Split spoke, single spoke and 3-hole disc - RP25.110 chemically blackened OO gauge wheel sets - Blackened brass bearings conforming to accurascale standards of 14.4mm back-to-back on 2mm axles over 26mm pinpoints.  - Eroded metal, plastic and wire detail parts, including, but not limited to, handrails, grab handles, door handles, lamp brackets, vacuum and steam pipes, though pipes, steam heating cock and break gear.  - Turned sprung metal buffers - NEM standard coupler pockets - Accessory Bag included contains steam/vacuum hoses and screw couplings - OO Scale Vehicle information: The Southern Railways Banana Vans, to Diagrams D1478 and D1479. Found throughout Britain from 1930's through to 1978. These could be seen alongside the Great Western Railway variant Y4 Banana Vans up and down the network. Examples have been preserved.