Hornby GWR Saint 2945 'Hillingdon Court' GWR Lined Green

GWR Saint 2945 'Hillingdon Court' GWR Lined Green We are delighted to present the next run of OO Gauge GWR Saint Class locomotives in this months range launch, with this particular example being No. 2945 ‘Hillingdon Court’ in Great Western lined green. Utilising the same highly acclaimed tooling used on the first run of Saints last year, this latest release takes the model one step further by the inclusion of a revised cab footplate for improved running, as well as being DCC ready via a 21-pin decoder socket, perfect for the HM7000 system. Model Specification: High detail OO Gauge model based on extensive research and original works drawings Die-cast Chassis and Running Plate. Model Weight is 341 grams High detail cab and fully decorated backhead with decorated instrument dials Etched metal nameplates Powerful 5 Pole Skew wound motor Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast Piston Rods & valve gear Fully decorated crew figures Prototypical size metal handrails with brass stanchions Brass main drive bearings Sprung metal buffers Front and Rear NEM coupling pocket Separately fitted lamps. Lamp code can be changed Separately fitted simulated coal load Improved cab footplate design Electronics: HM7000 21-Pin DCC decoder compatible HM7000 Power Bank compatible Illuminated flickering firebox Tooling: Tall Chimney Safety valve with top feeds Later curved footplate Fluted piston rods Early boiler Churchward tender Livery: GWR Lined Green Great Western tender lettering Accurate colours and fonts - OO Scale

Hornby GNR J13 1252 GNR Plain Grey

GNR J13 1252 GNR Plain Grey The Hornby GNR J13/J52 returns for 2026 in the standout GNR grey livery of the early 1900s, numbered 1252. Model Specification: Highly detailed OO gauge model based on extensive research and original works drawings Die-cast boiler, chassis and running plate. Model weight is 235 grams Highly detailed cab and fully decorated backhead with decorated instrument dials Pogo pin wheel pick-up arrangement for easy pick-up servicing Die-cast connecting rods Prototypical size metal handrails with brass stanchions Oilite main drive bearings Opening cab roof vent Sprung metal buffers Front and rear NEM coupling pocket. Rear coupling pocket has a close coupling mechanism Wheel pick-ups on all wheels Accessory bag contains vacuum pipes, lamps and couplings Separately fitted lamps (lamp code can be changed) Separately fitted simulated coal load. Electronics: Decoder-controlled firebox flicker (decoder sold separately) HM7000 21-pin sound decoder compatible HM7000 Power Bank compatible Powerful 5-pole skew-wound motor Tooling: Raised Safari cab roof ventilator Double footstep arrangement Coal bunker with coal rails Flush-faced connecting rods Brass Ramsbottom safety valves 3’ 3” built-up chimney GNR tapered buffer stocks Livery: GNR Plain Grey Semi-gloss with matt smokebox Accurate colours and typefaces - OO Scale

Hornby Dublo: Merchant Navy 35019 'French Line CGT' BR Express Blue

Dublo: Merchant Navy 35019 'French Line CGT' BR Express Blue A further addition to the highly collectable Hornby Dublo range comes in the form of Merchant Navy No. 35019 ‘French Line CGT’, in the vibrant express blue colour scheme of early British Railways. Moulded out of diecast, this high-fidelity model of a classic Bulleid ‘Spam Can’ is the ideal locomotive for collectors of Southern Region stock and Dublo Diecast models. Model Specification: High detail OO gauge model based on extensive research and original works drawings Fully moulded in Diecast Diecast connecting rods and valve gear Accessory ‘RF’ Headboard High detail cab and fully decorated backhead with decorated instrument dials Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels 8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling. Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Accessory bag Minimum 2nd Radius curves Electronics: 21-Pin HM7000 decoder socket compatible with HM7000 system HM7000 Power Bank compatible Livery: BR Lined Express Blue with ‘Cycling Lion’ early emblem on tender French Line CGT etched nameplates Semi-gloss finish Accurate colours and fonts - OO Scale

Rapido UK HR ‘Jones Goods’ HR Yellow No. 103 (1960s condition)

HR ‘Jones Goods’ HR Yellow No. 103 (1960s condition) Highland Railway ‘Jones Goods’ 4-6-0 HR Yellow No. 103 (1960s condition) Short smokebox door straps Smokebox wing plates Louvre chimney Short tender tank with toolbox Original style safety valve 21-pin decoder socket Sprung buffers Museum quality paint finish Factory-fitted sound speaker Smooth & powerful mechanism MoPower Stay Alive included Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK HR Loch Class No.119 ‘Loch Insh’ HR Drummond Lined Green

HR Loch Class No.119 ‘Loch Insh’ HR Drummond Lined Green Highland Railway ‘Loch’ Class 4-4-0 HR Drummond I Lined Green No. 119 ‘Loch Insh’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.120 ‘Loch Ness’ HR Drummond Lined Green

HR Loch Class No.120 ‘Loch Ness’ HR Drummond Lined Green Highland Railway ‘Loch’ Class 4-4-0 HR Drummond I Lined Green No. 120 ‘Loch Ness’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.125 ‘Loch Tay’ HR Jones Lined Green

HR Loch Class No.125 ‘Loch Tay’ HR Jones Lined Green Highland Railway ‘Loch’ Class 4-4-0 HR Jones Lined Green No. 125 ‘Loch Tay’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.14383 ‘Loch An Dorb’ LMS Lined Red

HR Loch Class No.14383 ‘Loch An Dorb’ LMS Lined Red Highland Railway ‘Loch’ Class 4-4-0 LMS Lined Red No. 14383 ‘Loch an Dorb’ Tall louvred HR chimney Caledonian style smokebox door Smokebox wing plates Jones safety valves Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.14384 ‘Loch Laggan’ LMS Lined Black

HR Loch Class No.14384 ‘Loch Laggan’ LMS Lined Black Highland Railway ‘Loch’ Class 4-4-0 LMS Lined Black No. 14384 ‘Loch Laggan’ Short louvred HR chimney Short smokebox door straps Smokebox without wing plates Ross pop safety valves Tablet catcher Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK HR Loch Class No.150 ‘Loch Eye’ ‘What If’ HR Lined Yellow

HR Loch Class No.150 ‘Loch Eye’ ‘What If’ HR Lined Yellow Highland Railway ‘Loch’ Class 4-4-0 ‘What If’ HR Lined Yellow No. 150 ‘Loch Eye’ Tall louvred HR chimney Long smokebox door straps Smokebox wing plates Jones safety valves Tender toolbox Tender gong Suitable for operation on 2nd Radius curves (438mm or greater) Dynamic firebox flicker 21-pin DCC decoder socket Factory-fitted speakers in all models Sprung buffers Museum-quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale (OO gauge)

Rapido UK GWR County No.1019 'County of Merioneth' BR Lined Black (Early)

GWR County No.1019 'County of Merioneth' BR Lined Black (Early) GWR Class 1000 ‘County’ 1019 “County of Merioneth” in BR Lined Black (Early Crest) Red backed number & name plates Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1017 'County of Hereford' BR Lined Green(Egyptian)

GWR County No.1017 'County of Hereford' BR Lined Green (Egyptian) GWR Class 1000 ‘County’ 1017 “County of Hereford” in BR (Egyptian) Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1000 'County of Middlesex' BR Lined Green (Late)

GWR County No.1000 'County of Middlesex' BR Lined Green (Late) GWR Class 1000 ‘County’ 1000 “County of Middlesex” in BR Lined Green (Late Crest) Double Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1001 G.W. Lined Green

GWR County No.1001 G.W. Lined Green GWR Class 1000 ‘County’ 1001 in GW Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1005 'County of Devon' G.W. Lined Green

GWR County No.1005 'County of Devon' G.W. Lined Green GWR Class 1000 ‘County’ 1005 “County of Devon” in GW Lined Green Single Chimney Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1006 'County of Cornwall' BR Lined Green (Early)

GWR County No.1006 'County of Cornwall' BR Lined Green (Early) GWR Class 1000 ‘County’ 1006 “County of Cornwall” in BR Lined Green (Early Crest) Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1011 'County of Chester' BR Lined Green (Late)

GWR County No.1011 'County of Chester' BR Lined Green (Late) GWR Class 1000 ‘County’ 1011 “County of Chester” in BR Lined Green (Late Crest) GWR number on front bufferbeam, smokebox door plates removed Double Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Rapido UK GWR County No.1013 'County of Dorset' BR Lined Black (Early)

GWR County No.1013 'County of Dorset' BR Lined Black (Early) GWR Class 1000 ‘County’ 1013 “County of Dorset” in BR Lined Black (Early Crest) Black backed number & name plates Single Chimney Speedo Fitted Parallel Buffers Suitable for operation on 2nd Radius curves (438mm or greater) Working dynamic firebox flicker 21-pin DCC decoder socket MoPower stay-alive capacitors 2 factory-fitted speakers in all models Sprung buffers Museum quality paint finish Smooth & powerful mechanism Highly detailed NEM coupler pockets 1:76 scale, (OO gauge)

Accurascale Class 50 50029 'Renown' Revised NSE w/WofE Branding

Class 50 50029 'Renown' Revised NSE w/WofE Branding Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50035 'Ark Royal' BR Blue

Class 50 50035 'Ark Royal' BR Blue Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50019 'Ramillies' BR Laira Departmental Blue

Class 50 50019 'Ramillies' BR Laira Departmental Blue Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Hornby BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack

BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack The Class 43 HST Power Cars have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce this special commemorative train pack in OO Gauge, depicting 43128 and 43135 in ScotRail ‘InterCity 7’ livery, which are still in service as part of the last HST fleet in passenger operation in the UK. Based on the refreshed tooling suite and featuring working directional and cab lights, working roof fans, 5-pole motor with twin flywheels in the motorised car, die-cast chassis and numerous separately fitted parts, this train pack is a must-have for collectors and fans of this classic British design. Features: Twin pack of highly detailed Class 43 models Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab handrails, underframe equipment and roof exhaust shroud Detailed cab interior 5-pole motor with twin flywheels in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Working directional and cab headlights Working roof fans DCC Ready with 21-Pin decoder socket in motorised/dummy cars compatible with HM7000 system Space for HM7000-21TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Some light functions will only operate to their fullest capability on DCC - OO Scale 

Hornby Railroad: BR Class 47 47749 'Atlantic Collage' RES

Railroad: BR Class 47 47749 'Atlantic Collage' RES This OO gauge model locomotive represents a Class 47 example that emerged from Crewe Works in February 1965 as D1660.  It was allocated to Swansea’s Landore MPD, before being named ‘City of Truro’ at Truro station in June that year. It became 47076 under TOPs, then was reclassified as a 47/4 in November 1984, when it became 47625. In the 1990s, it became part of the RES pool for operating mail and parcels trains and, in November 1995, was modified to 47/7b, with longer-range fuel tanks and equipment for operating with a propelling control vehicle (PCV). It was given the number 47749 and named ‘Atlantic College’. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: GWR County 1013 'County of Dorset' BR Lined Green

Railroad: GWR County 1013 'County of Dorset' BR Lined Green  The ‘County’ Class was the last of the GWR-designed two-cylinder 4-6-0s, with 30 built at Swindon between 1945 and 1947 to the design of Chief Mechanical Engineer, Frederick Hawksworth.  ‘County of Dorset’ entered service in February 1946 and spent most of its early years in the West Country at Bristol, Plymouth, Truro and Penzance, before transferring to Shrewsbury in December 1951. Its final move was to Swindon in September 1963, from where it was withdrawn in July the following year and scrapped at Cashmore’s yard in Newport, South Wales.  Our OO gauge RailRoad replica model locomotive is a detailed, yet durable, version of the Country Class, bringing the 'County of Dorset' to your model railway collection. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 8 71000 'Duke of Gloucester' BR Lined Green

Railroad: BR Class 8 71000 'Duke of Gloucester' BR Lined Green Built as the replacement for ‘Princess Royal’ Class 4-6-2 46202 ‘Princess Anne’, which was destroyed in the Harrow and Wealdstone rail disaster of 1952, the Riddles-designed ‘Pacific’ was intended as the first of a new batch of modern locomotives that would serve BR for many years to come.  Completed at Crewe in 1954, plans to build more were turned down by the Railway Executive because the design was too expensive and complex. As a result, ‘Duke of Gloucester’ remained unique, with its three-cylinder configuration and Caprotti rotary cam-driven valve gear. It had an operational life of just eight years, being withdrawn in 1962. One of its cylinders was saved for display in the National Railway Museum, while the other was removed to balance the locomotive before going for scrap in South Wales.  It was, however, saved in 1974 and a restoration lasting 13 years ensued, including building new cylinders from scratch. When it returned to steam it became a regular on the main line and during 2025 returned from its latest overhaul, once again hauling steam specials to the delight of enthusiasts.  Bring the spirit of 'Duke of Gloucester' back to life with this OO gauge Class 08 RailRoad model locomotive. - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: Class 395 395005 Southeastern High Speed Train Pack

Railroad: Class 395 395005 Southeastern High Speed Train Pack Known as ‘Javelins’, these Class 395 trains are dual-voltage EMUs built as part of the Hitachi ‘AT300’ family for high-speed commuter services operated by Southeastern.  Introduced from June 2009, they are typically formed of six cars, though they can quickly be coupled together to form 12-cars when required. Based at Ashford and Ramsgate, there are currently 29 six-car sets in service. They can be found on services on High Speed 1, the North Kent Line, South Eastern Main Line, Chatham and Kent Coast lines, and the Ashford-Ramsgate line.  Our RailRoad model Train Pack brings the magic of the 'Javelins' to life on your OO gauge layout. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack

BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack This Virgin Class 43 HST 'Lady in Red' train pack brings the vibrant red and black livery to your model railway layout, creating quite an impression as it moves around the tracks. This OO gauge locomotive model has NEM tension lock couplings and a 21-pin socket, so you can upgrade to HM7000 control when you are ready.  Virgin Trains won both the InterCity West Coast and InterCity CrossCountry franchises following privatisation of BR, commencing services under its Virgin branding in 1997. It inherited a variety of locomotives and rolling stock from BR, including InterCity 125 HST sets.  Class 43 power car 43093 had been named ‘York Festival 88’ under BR, but was renamed ‘Lady in Red’ in 1997, which it carried until 2003, while 43097 had been called ‘The Light Infantry’ until 1990, but entered service with Virgin CrossCountry without a name. Painted in the company’s red and black livery, with white markings, both later became part of First Great Western’s HST fleet. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour)

LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour) Train Pack  In 1988, Australia celebrated its bicentenary and, to mark the occasion, the world-famous ‘Flying Scotsman’ was invited to travel from Britain to take part in a series of railtours that were part of the ‘Aus Steam 88’ Festival, arriving in October that year.  Already resident in Western Australia since 1977, in the care of the Pilbara Railway Historical Society, former GWR ‘Castle’ Class 4-6-0 ‘Pendennis Castle’ was moved by road to Perth in early 1989 to operate alongside its one-time rival ‘A3’ Class ‘Pacific’. This unlikely reunion occurred almost 9,000 miles from where a week-long locomotive exchange once took place between the LNER and GWR, in April 1925.  This LNER and GWR Train Pack celebrates that landmark event in Australia 37 years ago in 1989. Featuring OO gauge locomotive model replicas of 'Flying Scotsman' and 'Pendennis Castle', these highly detailed designs include sprung metal buffers and NEM tension lock couplings for smooth rake creation. Add a 21-pin decoder to upgrade to HM7000 control. - DCC Ready 21-Pin Socket - OO Scale

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved The BR English Electric DP1 'Deltic' is always a favourite model, and with its new blue livery, this OO gauge diesel engine is sure to be just as popular. This version features sprung metal buffers, NEM tension lock couplings and a coreless motor. It is also DCC-ready with a 21-pin socket for easy HM7000 conversion. Features include: High detail OO gauge model based on extensive research Presented as on display in Locomotion, Shildon, with grey chassis, steps and buffers; and horns removed Heavy, fully die-cast chassis and body Highly detailed cab interior Decorated driver controls with illuminated instrument dials Directional head and tail lighting Optional working Mars lights Working cab lights Engine bay lighting Physical switches on blanking plug to control the various lighting configurations Magnetic roof cover to access 21-Pin DCC socket Dual working roof fans, with manually adjustable speed controls Separately fitted etched window frames Large, powerful coreless motor with two flywheels for smooth running Dual bogie drive Sprung metal buffers Front and rear NEM coupling pocket Additional lamps supplied in the accessory bag Hand painted driver figures Supplied with 8 finely decorated etchings, including Locomotion headboard Decorated engine bay featuring printed ‘Napier Deltic’ plates Pre-fitted with a sugar cube speaker for easy digital conversion Space inside for HM7000 Enhanced Bass Speaker Space inside fuel tank for HM7070 - Power Bank Flange squeal sensor mounted in the bogies automatically detects when it is going round a curve to play flange squeal sounds dependant on speed. (Feature available once product is fitted with a HM7000 decoder) Fitted to display plinth with etched presentation plate Fully compatible with Hornby HM7000 app control system, with meticulously crafted Deltic sound profile (SD049) available for download. - DCC Ready 21-Pin Socket - OO Scale

Hornby Stanier 5MT 'Black 5' 45055 BR Lined Black (Early)

Stanier 5MT 'Black 5' 45055 BR Lined Black (Early)  Completed in November 1935, this ‘Black Five’ was built at Vulcan Foundry, near Newton-le-Willows in Lancashire.  It spent most of its working career in north-west England and North Wales, though in 1966 it had brief allocations at West Hartlepool and York, before moving back to the Liverpool area and serving at Bank Hall and then Aintree. It almost lasted to the end of steam, withdrawal coming a month shy on 6th July 1968 from Lostock Hall, Preston, with scrapping the following February.  This OO gauge locomotive model features sprung metal buffers and NEM tension lock couplings, and can be upgraded to HM7000 control with a 21-pin decoder (sold separately). Details: Running number 45055 BR Mixed Traffic livery Matt smokebox and cab roof finish 5MT long wheelbase configuration Flickering firebox Fluted die-cast connecting rods Walschaerts valve gear Parallel buffer stocks Features: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and running plate. Model weight is 360 grams High detail cab and fully decorated backhead with decorated instrument dials HM7000 21-Pin Decoder socket HM7000 Power Bank compatible Powerful 5 pole skew wound motor Illuminated flickering firebox Illuminated head lamps and tail lamps (can be controlled using a DCC Decoder) Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast connecting rods and valve gear Prototypical size metal handrails with brass stanchions Brass main drive bearings Opening cab roof vent Adjustable cab doors Sprung metal buffers Front and Rear NEM coupling pocket Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - OO Scale

Hornby GWR Castle Class 5071 'Spitfire' BR Lined Green (Early)

GWR Castle Class 5071 'Spitfire' BR Lined Green (Early)  This locomotive entered service with the GWR at Newton Abbot in June 1938, initially named ‘Clifford Castle’, but this was changed to 'Spitfire' during the Second World War following the aeroplane’s pivotal role in the Battle of Britain during 1940.  It then spent most of its career shedded in the West Country, though after nationalisation, it had spells in the late 1950s at Gloucester and Worcester. The locomotive was fitted with a double chimney and four-row superheater in June 1959, before moving to St. Philip’s Marsh, Plymouth in February 1962, from where it was withdrawn in October 1963.  This detailed OO gauge model depicts 5071 in its original form, with a smart green livery. It also features sprung metal buffers, NEM tension lock couplings and a 21-pin socket, ready for upgrade to HM7000. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Standard Class 9F 92031 BR Black (Early)

BR Standard Class 9F 92031 BR Black (Early) The smart black BR (Early) Class 9F makes a wonderful OO gauge model locomotive addition to your collection. With sprung metal buffers and NEM tecnsion lock couplings, this model is DCC ready with a 21-pin socket. New to March in Cambridgeshire in November 1954, 92031 was one of 251 ‘standard’ heavy freight locomotives built to the design of Robert Riddles between January 1954 and March 1960. Its working career took it to allocations at New England (Peterborough), Annesley, Westhouses and Newton Heath, Manchester, from where it was withdrawn in January 1967 after an incredibly short working life of just 12 years and almost two months. Scrapped at T.W. Ward at Killamarsh, near Sheffield, the locomotive was always paired with a standard BR1F tender. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Rebuilt Merchant Navy 35028 'Clan line' BR Green (Preserved)

BR Rebuilt Merchant Navy 35028 'Clan line' BR Lined Green (Preserved) The BR Rebuilt Merchant Navy 'Clan Line' is back in OO model form. This newly tooled model locomotive has sprung metal buffers and NEM tension lock couplings and is a highly detailed replica of a popular steam engine. One of the last of its class to be built, this locomotive was completed after nationalisation of Britain’s railways to Bulleid’s Southern ‘Merchant Navy’ design, complete with streamlined casing and chain-driven valve gear, entering service in December 1948. It didn’t receive its name until January 1951, during a ceremony at Southampton Docks. Like all 30 members of the class, ‘Clan Line’ was rebuilt, in its case, during 1959, and remained in service until withdrawal from Nine Elms, London in July 1947. It was subsequently saved privately for preservation and is a regular main line performer, once hauling the prestigious Belmond British Pullman. MODEL SPECIFICATION Die-cast chassis, pony truck and trailing truck Die-cast boiler and running plate Merchant Navy Bullied-Firth-Brown wheels High detail cab and fully decorated backhead with decorated instrument dials Powerful 5 pole skew wound motor with cardan shaft and flywheel Flywheel with cardan shaft arrangement for smooth running Pogo pin wheel pickup arrangement for easy pickup servicing Die-cast connecting rods and valve gear Oilite main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Optional fit rear flanged wheelset. Only recommended for larger layouts with sweeping curves or for display purposes Wheel pickups on the main locomotive and tender wheelsets Separately fitted simulated coal load. TOOLING High detail OO gauge model based on extensive research, 3D scanning and original works drawings Cast trailing truck Modern 6000 gallon tender with additional pump, air tanks and battery arrangement for main line running (as preserved) Opening cab roof vent DCC Fitted with a 21-pin decoder socket Flickering firebox Working cab light MCU controlled electric front lamps for full lamp code control Working tender lamps Eight-way locomotive to tender connection LIVERY BR Lined Green livery - OO Scale

Hornby Railroad: Class 31 31271 'Stratford' Triple Grey Construction

Railroad: Class 31 31271 'Stratford 1840 - 2001' Triple Grey Construction This Hornby RailRoad Class 31 model is presented in the Trainload construction livery, bringing a modern splash of colour to your 00-gauge layout. Based on the reliable Brush Type 2 locomotives, this model features wide-tension lock couplings and moulded plastic. DCC ready, it comes fitted with a 21-pin decoder socket, allowing for easy digital upgrade. History: Originally introduced in the late 1950s, the Class 31s became a familiar sight across the British railway network, known for their versatility and longevity. Locomotive No. 31271, preserved in working order, has seen continued use in the modern era and now wears the vibrant Trainload Construction livery — a striking nod to its role in supporting infrastructure projects across the capital. - OO Scale

Hornby LNER Class J52 68846 BR Lined Black (Late)

LNER Class J52 68846 BR Lined Black (Late) Common J13/J52 Features: New Tooling - High detail OO Gauge model based on extensive research and original works drawings. Diecast Boiler, Chassis and Running Plate. Model Weight is 235 grams. High detail cab and fully decorated backhead with decorated instrument dials. Decoder controlled firebox flicker. (decoder sold separately). HM7000 21-Pin sound decoder compatible. HM7000 Power Bank compatible. Powerful 5 Pole Skew wound motor. Pogo pin wheel pickup arrangement for easy pickup servicing. Diecast connecting rods. Prototypical size metal handrails with brass stanchions. Oilite main drive bearings. Opening cab roof vent. Sprung metal buffers. Front and Rear NEM coupling pocket. Rear coupling pocket had a close coupling mechanism. Wheel pickups on all wheels. Accessory bag contains vacuum pipes, lamps and couplings. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. History: This locomotive entered service as one of Henry Ivatt’s ‘J13’ Class as No. 1247, having been built under contract by Sharp, Stewart in 1899. It became LNER ‘J52’ 4247 at the Grouping in 1923, and later 8846 under the LNER’s 1946 renumbering scheme.  It entered BR service as 68846 and was withdrawn from King’s Cross ‘Top Shed’ in May 1959, at which point it became the first preserved locomotive to be bought directly from BR when it was acquired by Captain W.G. Smith. It is now part of the National Collection and restored as GNR 1247. - OO Scale

Hornby LMS Patriot Class 5514 'Holyhead' LMS Lined Black

LMS Patriot Class 5514 'Holyhead' LMS Lined Black This Hornby model of LMS ‘Patriot’ Class 4-6-0 No. 5514 ‘Holyhead’ is finished in accurate period detail as it appeared in the late 1930s. Designed for reliable performance on OO gauge layouts, the locomotive is DCC ready with a 21-pin decoder socket and if fitted with Metal sprung buffers and NEM tension lock couplers. History: Henry Fowler designed the ‘Patriot’ 4-6-0 for the LMS as an upgrade of the LNWR’s ‘Large Claughton’ Class for express passenger work. Built at both Crewe and Derby Works, 42 and ten respectively, 52 entered service between 1930 and 1934. ‘Holyhead’ was new from Crewe in September 1932, numbered 5983, but this was changed to 5514 in August 1938, as represented by the model.  The locomotive would later be rebuilt with a Stanier taper boiler in 1947, before becoming BR 45514, with withdrawal coming at Derby in May 1961, the first of the rebuilt ‘Patriots’ to be condemned. - OO Scale

Dapol Class 57xx Pannier 9669 BR Black Late Crest (O)

Class 57xx Pannier 9669 BR Late Crest The 5700 class were introduced in 1929, whilst the 8750 class followed in 1933 and by 1950 863 locomotives had been constructed, making this perhaps the most successful 0-6-0. G.W.R. Classification: Group C, Route Blue, changed to yellow under B.R. B.R. Classification: 3F. Designed for shunting and short freight workings, however it soon became clear that other duties could be performed such as branch passenger working and mainline freight, being widespread across the system. The 8750 class can be distinguished from the 5700 class by the totally enclosed larger cab. Whistle shields and bunker steps with handrails were added from 1936. A new water feed was introduced in 1942 with the clack valves being fitted inside a case on top of the boiler in front of the dome, which became standard for builds after 1944. Between 1956 and 1963, thirteen 5700 locomotives were sold to the London Transport being painted in the attractive lined red livery. The NCB bought five 5700 locomotives between 1959 and 1965, with number 7754 still working in 1975. Last of class withdrawn: 1966. Preserved examples: 3650, 3738, 4612, 5764/L95, 5775/L89, 5786/L92, 7714, 7715/L99, 7752/L94, 7754, 7760/L90, 9600, 9629, 9642, 9681, 9682 Features of the 57XX & 8750 include: Diecast Chassis and footplate for excellent adhesion and pulling power Powerful 5 pole motor providing fine power control Beautifully detailed body with correct body type variations applied where relevant with many separately added details Partial representation of working inside motion and many other exquisite fine details including: Four cabs for original 57XX, Later 57XX, 8750 Collett cab and London Transport cab Sprung Buffers Removable roof, secured with magnets for ease of fitting engine crew Working cab doors, where fitted Flickering fire box glow Ash pan with correct double brake rodding Expertly applied livery Wheels conform to the new O Gauge standard, suitable for O Super Fine DCC Ready with a 21 pin decoder socket - O Scale

Hornby LNER A3, 4472 'Flying Scotsman' (VE Day 80th)

LNER A3, 4472 'Flying Scotsman' (VE Day 80th Anniversary) Renowned the world over, the LNER Class A3 4472 ‘Flying Scotsman’ takes centre stage in Hornby’s Victory over Europe 80th Anniversary Collection, finished in its iconic wartime black livery, this 00 gauge model is DCC-ready with a 21-pin socket, allowing for seamless integration with modern digital control systems. This model features a die-cast running plate and flickering firebox, adding extra realism to any layout. - DCC Ready 21-Pin Socket - OO Scale

EFE Rail SR Bulleid Booster 20001 BR Green

SR Bulleid Booster 20001 BR Green Features: Pristine BR Green livery Running No. 20001 Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 235mm (over couplings) Five pole, skew wound, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic ‘Bulleid’ profile and detailing Bogie-mounted coupling pockets to NEM362 standards at each end Designed to operate on curves of second radius (438mm) or greater Metal Pantograph, sprung for posing in the up or down position Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, handrails, roof vents and whistles Sprung buffers Cab interior detailing including seats, power handle, brake wheel and dials Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker installed in all models for optimum sound reproduction DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Standard Cab Windows Vertical Handrail alongside the Left Hand Cab Window Two Windscreen Wipers Twin Whistles Route Indicator Discs Single-tread Steps between Bogies Original Axle Boxes Two Sandboxes per Bogie Square Shoe Beam Flash Guards Standpipe Vacuum Pipes Conceived in the late-1930s to take advantage of the Southern’s expansive electrified network, two of these Co-Co locomotives were built, gaining the nickname the ‘Boosters’ due to their motor-generator-flywheel drive arrangement employed to overcome ‘gapping’, when the locomotive could momentarily loose its electrical supply when travelling over gaps in the conductor rail. Produced especially for the EFE Rail range, this all-new model features a wealth of detail with a varied tooling suite allowing the first two locomotives, CC1 and CC2, to be modelled accurately at various points in their careers. Driven by a 5 pole, skew wound motor with flywheel, each of the six axles are driven whilst all twelve wheels provide electrical pickup. Directional lighting will operate in the forwards direction (the real locomotives were not fitted with tail lights), whilst cab lighting can be operated using a magnetic wand when used on analogue control, or when a 21 Pin DCC decoder is fitted, via two DCC functions. A speaker is pre-fitted to every model, allowing a sound decoder to be fitted to bring another dimension to your model in an instant. - Era 5 - OO Scale

Accurascale Class 37 37429 'Eisteddfod Genedlaethol' BR Large Logo

Class 37 37429 'Eisteddfod Genedlaethol' BR Large Logo Representing the original Cardiff Canton batch of six Class 37/4 conversions is No. 37429, ‘refurbished’ by Crewe Works from No. 37300 (originally D6600) in March 1986. Nos. 37426-37431 were originally planned to join the rest of the sub class on the Scottish Region. However, before they were completed the London Midland identified a more pressing need for this batch, although they were allocated to Canton in South Wales due to this depot’s extensive knowledge of the English Electric Type 3s. The introduction of Electric Train Heat (ETH) fitted locomotives to the restricted weight Cambrian route from Wolverhampton to the Welsh coast allowed InterCity to supplement its tired Mk.1 fleet on London Euston to Aberystwyth and Pwllheli services with air-conditioned Mk.2 coaches, although Mk.1s – often Network SouthEast liveried sets – were still regulars on the summer-dated trains into the 1990s. Unlike their cousins north of the border, the Welsh ‘37/4s’ were primarily passenger machines and they also found themselves allocated to Liverpool Lime St/Manchester Piccadilly/North Wales-Cardiff and Cardiff-Bristol-Weymouth diagrams. Outshopped in large logo livery, it soon gained a small red Welsh dragon logo on the driver’s cabsides, and later acquired the Sir Dyfed / County of Dyfed nameplates from No. 37180 in April 1987. However, they were removed after just four months and the locomotive was renamed Eisteddfod Genedlaethol – after the famous festival – in the August. In January 1991 it was released from Glasgow St Rollox Works in Railfreight Construction colours, and notably retained its red-backed nameplates like the other three ‘37/4s’ to gain these particular squadron decals. It kept its name on its Regional Railways repaint in May 1993 and was stored in 2001. It was disposed of at EMR Kingsbury in February 2008. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37414 Triple Grey Construction Sector

Class 37 37414 Triple Grey Construction Sector The introduction of Class 156 ‘Super Sprinters’ on the West Highland from January 1989 and on the Far North/Kyle lines in the May triggered an exodus of Class 37/4s to freight work. By the end of that year, Laira, Motherwell and Tinsley had gained allocations, while Immingham and Thornaby both acquired three locos each in the middle of 1990, by which point half the sub class were south of the border. One of these was No. 37414, which was on china clay duties in Cornwall until transferred to the North Lincolnshire depot’s FABI pool that September. This loco, which retained its Western Region-style lamp irons at the No.2 end only, had been repainted in the Roundel triple grey scheme with Distribution decals in August 1989, but quickly swapped these for more appropriate Construction brandings after its move. This saw it mostly outbased at Buxton in the Peak District to haul aggregates, cement and the iconic ICI limestone trains.While it wasn’t completely allergic to passenger work during this period, it moved to Crewe Diesel in November 1992 to join the RCMC Regional Railways North West pool, initially to work Liverpool Lime St/Crewe-Cardiff trains, still wearing its classic Railfreight image. In March 1993 it became the first member of the fleet to receive the new Regional Railways livery along with the name Cathays C&W Works 1846-1993, becoming a stalwart of the North Wales coast and the famed ‘club’ trains from Liverpool and Manchester Victoria. It soldiered on until it was stored by EWS in March 2000 and was scrapped at TJ Thomson’s of Stockton exactly nine years later. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37421 Colas

Class 37 37421 Colas Stored by EWS at Motherwell in March 2005 and sold for preservation at the Pontypool & Blaenavon Railway in 2009, No. 37421 was one of four Class 37s that was purchased by Colas Rail in 2013 for a return to the main line, along with Nos. 37116, 37175 and 37219. While the latter pair debuted for their new owner in the middle of 2014, it would be another year before No. 37421 would re-enter traffic along with BR green-liveried former Harry Needle Class 37/0 No. 37057/D6757, just in time to assist on the newly acquired Network Rail infrastructure monitoring contract. For the next four years, the Colas Class 37/4 was a solid performer on various test formations, until called to South Wales in May 2019 to provide power for Cardiff-Rhymney line commuter turns along with hired-in Nos. 37025 and 37418. This followed a fallow few months when the locomotive was under repair and eventually returned after a bogie swap with No. 37175. The Rhymney workings ended in March 2020 and it was back to test train work, mixed in with NR saloon duties with No. 975025 Caroline and the odd infrastructure duty. Cosmetically, towards the end of that same year it swapped its Colas ‘hard hat’ logos for new diamond stickers, although it has stubbornly retained its unique arrangement of single lamp irons on different sides of the locomotive at each end. Despite the increasing number of Colas HST power cars on the NR services, No. 37421 is still a regular atop PLPR (Plain Line Pattern Recognition) and UTU (Ultrasonic Testing Unit) formations and is expected to remain a key component of the operator’s fleet for several years to come. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37408 'Loch Rannoch' EWS

Class 37 37408 'Loch Rannoch' EWS Arguably the most popular of the Class 37/4s in the British Rail and early privatisation era, No. 37408 Loch Rannoch clinged obstinately to its large logo paint scheme – the last so adorned – until being called to Toton in mid-1998 for a repaint. Following a protracted overhaul, which included a new toughened centre window, it debuted in the revised maroon and gold of its owner EWS, sans-nameplates, in November and wasn’t reunited with its famous name until the following February. Over the next seven years, the former No. 37289 (built as D6989) was a regular performer on loco-hauled services around the country, particularly Birmingham/Crewe-Bangor/Holyhead, Cardiff-Fishguard/Rhymney and Crewe/Manchester, Leeds-Carlisle/Knaresborough and even in Scotland on the Fort William sleeper. It could also be found on a wide variety of freight and even Railtrack/Network Rail test trains and was variously allocated to Crewe Diesel, Motherwell, Cardiff Canton, Toton and Margam during this period.Outshopped in the same livery in March 2002, its rock star status meant that it was never long before it gained various accoutrements, including regular bouts of Eastfield ‘Westies’, silver buffers, white lamp irons, black headcode panels and even Immingham 40B shedplates. It seemed inevitable that Rannoch would return to large logo in due course and would have been a favourite for preservation, but after running away and colliding with its stabled rake of coaches at Rhymney on 1 August 2005 the locomotive was stored and repairs were not authorised. It was eventually scrapped at EMR Kingsbury in January 2008. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Dapol Streamlined Diesel Railcar W11 BR Chocolate/Cream (O)

Streamlined Diesel Railcar W11 BR Chocolate/Cream Locomotive Information: The first diesel railcar was introduced by the GWR in 1933. The innovation was to prove extremely successful and they continued in operation well into the 1960s when their use was eclipsed by the introduction of the BR first generation DMUs. The railcars art deco air smoothed styling has lead to their nickname of Flying Banana although later variants were produced to a more angular style. In all 38 GWR diesel railcars were produced from 1933 to 1942 at three different sites with three surviving into preservation. Includes: - Operating Directional lighting - Operating passenger compartment lighting which includes working wall lights - Cab light - On appropriate models the lamp bracket can be exchanged for a working tail lamp for prototypical running - Easy DCC fitting via removable plate. - 21 PIN DCC Ready  - Detailed cab interior - Removable gearbox covers (supplied in accessory pack) - Decorated seating - Flush glazing with a single window posed in the slid open position for passenger ventilation - Sliding luggage doors - Vestigial buffers - All wheel pick up - Engineered for passenger inclusion - Suitable for Radius 2 curves - O Gauge (1:43 Scale)