Hornby LNER Class A4 60016 'Silver King' BR (Early) Green (TT)

The LNER Gresley A4 is one of the most iconic express locomotives in Great Britain, with its streamlined casing a classic symbol of the attitude towards speed and design in the 1930s, which saw increased competition to the railways from road and air travel. The LNER Board knew that they had to make travel between the major cities faster, comfortable and more reliable. Nigel Gresley, the LNER's Chief Mechanical Officer, travelled on the Fliegende Hamburger diesel locomotive in Germany and was impressed by its streamlining, although he realized it was only efficient at high speeds. Gresley was certain that a modified A3 Pacific, with streamlining, could haul greater loads than other locomotives at the same speed or faster and a series of trials were conducted to confirm the A3's suitability. With the trials successfully completed, the LNER Board gave Gresley the go-ahead to create the "Silver Jubilee" streamlined trains, the first of the new streamlined A4s.The streamlining of the A4s' steam circuit, higher boiler pressure and extension of the firebox to create a combustion chamber made them more efficient than the A3 as they consumed less coal and water- especially later on when they were also fitted with a Kylchap double chimney. This improved their free steaming capabilities further. Their streamlined design not only made them capable of high speeds, but created an up draught of smoke, obscuring the driver's vision, a major problem on the new Class A4 engines. The story goes that during wind tunnel testing, after several unsuccessful efforts to get the smoke to lift clear, a thumbprint was inadvertently left on the clay model just behind the chimney. This succeeded in clearing the smoke and was incorporated into the final design. 2511 Silver King was the 3rd A4 locomotive to be built, designed to pull the Silver Jubilee service. The locomotive entered service in November 1935 in the unique LNER Silver livery designed for the service. The locomotive would go on to work under BR before being scrapped in 1965, making it one of the longest serving A4 locomotives. - NEXT 18 DCC Decoder Socket - TT:120 Scale

Hornby LNER Class A3 60078 'Night Hawk' BR (Early) Green (TT)

While the A1 was a fantastic locomotive that served its purpose as intended, it became clear reasonably quickly that some modifications could be made that would greatly improve its performance. These modifications however were too significant to avoid reclassifying the locomotives and as such the A1 Felstead 2743 was the first to be withdrawn from service only a handful of years after it was introduced, emerging from its shed in August 1928 as the first A3 ‘Super Pacific.’ The newly designated A3 locomotives had an improved boiler, larger cylinders and a conversion from right to left hand drive. 27 of the class were built as A3 locomotives from the get go, with all of the in service A1 examples being converted before 1950, the last such example to undergo this transformation was the then BR numbered 60068 Sir Visto. Night Hawk first entered LNER service on the fairly pleasing 24th October 1924 as locomotive number 2577 as an A1 locomotive. Rebuilt in January 1944 to an A3, the locomotive would go in to be numbered 78, and then 60078 under BR. Night Hawk would go on to be withdrawn on the 22nd October 1962, almost making it a nice round 38 years in service, before being scrapped at Doncaster in 1963. - NEXT 18 DCC Decoder Socket - TT:120 Scale

Bachmann NER E (J71) Tank 317 LNER Lined Black

NER E (J71) Tank 317 LNER Lined Black  Details on this model: Pristine LNER Lined Black Livery Running No. 317 Boiler Clack Valves Ramsbottom Safety Valves Pipe Whistle Steam Brakes Only Plain Smokebox Door Smokebox Door Handwheel Parallel Shank Buffers with Round Mounts Coal Bunker with Coal Rails fitted Rear Cab Windows without Bars Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks, cab and bunker Separately applied details including splashers, tank filler hatches, safety valves, dome and chimney, smokebox handles, clack valves* and vacuum pipes* (*where applicable) Individual metal detail components including handrails, handrail knobs, guard irons, lamp irons and turned metal whistle Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted regulator, reverser and handbrake Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, poseable lamps and three-link couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED models are used on analogue) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann NER E (J71) Tank 68260 BR Black (Early Emblem)

NER E (J71) Tank 68260 BR Black (Early Emblem) Details on this model: Pristine BR Black Early Emblem Livery Running No. 68260 Boiler Clack Valves Removed Ross Pop Safety Valves with Cover Pipe Whistle Steam Brakes Only Smokebox Door with Numberplate Twin Smokebox Door Handles Group Standard Buffers with Square Mounts Coal Bunker with Coal Rails fitted Rear Cab Windows with Bars fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks, cab and bunker Separately applied details including splashers, tank filler hatches, safety valves, dome and chimney, smokebox handles, clack valves* and vacuum pipes* (*where applicable) Individual metal detail components including handrails, handrail knobs, guard irons, lamp irons and turned metal whistle Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted regulator, reverser and handbrake Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, poseable lamps and three-link couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED models are used on analogue) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann LB&SCR E4 Tank 32473 BR Lined Black (Early Emblem)

LB&SCR E4 Tank 32473 BR Lined Black (Early Emblem) The E4 Class 0-6-2 Radial Tank was one of the most successful and versatile tank locomotives that the Southern Railway inherited upon Grouping in 1923, with all 75 locomotives that the London, Brighton & South Coast Railway had constructed around the turn of the century passing to the SR, and all but one would make it to BR ownership as well. The Bachmann Branchline model of the E4 is just as versatile, featuring diecast metal construction supplemented with high-fidelity injection moulded parts to create a model as strong and capable as its prototype. What’s more, the Branchline E4 has been upgraded for 2025 and now features a Next18 DCC decoder socket and provision for a speaker, allowing SOUND FITTED models to be offered for the first time. Details on This Model: Locomotive is now Preserved Pristine BR Lined Black (Early Emblem) Livery Running No. 32473 Dished Smokebox Door with Numberplate Westinghouse Brakes and Vacuum Brakes Lever Reverser Firebox Mounted Whistle Enclosed Coal Rails Countersunk Bufferbeam Rivets Smokebox Saddle Mounted Oil Pots Steam Injector and Pipes Boiler Clack Valves Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 149mm (over couplings) 3-Pole motor Electrical pickup from all driving wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Sprung rear radial truck Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Space is provided for a speaker to be fitted along with connection points on the PCB SOUND FITTED models include a pre-fitted speaker Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Dapol Class 56 '56007' Triple Grey Transrail (N)

Class 56 '56007' Triple Grey Transrail The British Rail Class 56 is a type of Co-Co locomotive designed for heavy freight work and was introduced between 1976 and 1983. In all 135 Class 56s were built, the first 30 by Electroputere in Romania but due to poor quality of construction the remainder were built by BREL at their Doncaster and Crewe works. The Class 56 was considered to be a successful locomotive and had a long service life. However performance and maintenance costs savings made from the deployment of the newly imported Class 66 resulted in most of the fleet of Class 56s being decommissioned or sold on by 2006. Several Class 56s are currently preserved and some class 56s are still in service today with private rail companies hauling freight and for the occasional special service.   Features: Retooled body with improvements to the body shape. cab roof and windows  Tooling options to accurately reproduce both Romanian and Doncaster bodyshell types Etched side and roof grilles in two styles  RP25.72 darkened wheels with pin point bearings  5 pole Super creep motor with controlled pulling power and incredible slow running speed  All wheel drive and pick up  Directional lights  Dapols low friction mechanism for efficient quiet running  Heavy split frame chassis for excellent running and haulage qualities    DCC Ready with a NEXT-18 decoder socket - N Scale

Gaugemaster Collection Class 56 '56031' "Merehead" BR Dutch Departmental (N)

Class 56 '56031' "Merehead" BR Dutch Departmental The British Rail Class 56 is a type of diesel locomotive designed for heavy freight work. It is a Type 5 locomotive, with a Ruston-Paxman power unit developing 3,250 bhp (2,423 kW), and has a Co-Co wheel arrangement. Enthusiasts nicknamed them "Gridirons" (or "Grids" for short), due to the grid like horn cover on the locomotive's cab ends fitted to nos. 56056 onwards. Under its Romanian railway factory nomenclature, the locomotive was named Electroputere LDE 3500, with LDE coming from Locomtiva Diesel-Electrica (Diesel-Electric locomotive) and the 3500 being the planned horsepower output. The Class 56 fleet was introduced between 1976 and 1984, a total of 135 examples were manufactured. The first 30 locomotives (56001 - 56030, factory classification LDE3500) were built by Electroputere in Romania, but these typically suffered from poor construction standards and many were withdrawn from service early for extensive rebuilding before re-entering revenue service.[3] The remaining 105 locomotives were built by British Rail Engineering Limited (BREL) at Doncaster Works (56031 to 56115) and Crewe Works (56116 to 56135). 1:148 Scale model of a Class 56 diesel locomotive decorated in Railfreight Metals livery. These models have been specially commissioned by Gaugemaster and form part of the Gaugemaster Collection Series. These models feature lots of era specific details and markings and lots of external body details as modelled on the prototype. Features: NEXT-18 DCC Decoder Socket Gaugemaster Limited Edition Detailed body with etched grills and separately fitted hand rails Darkened wheels and pin point bearings Split frame tungsten chassis 5 Pole motor for smoother operation All wheel drive All Wheel pick up Includes etched brass name and number plates Directional lighting NEM couplings Includes both standard and knuckle couplings Includes spares bag with additional detailing parts - N Scale

Gaugemaster Collection Class 56 '56032' "County of South Glamorgan" RF Metals (N)

Class 56 '56032' "County of South Glamorgan" RF Metals  The British Rail Class 56 is a type of diesel locomotive designed for heavy freight work. It is a Type 5 locomotive, with a Ruston-Paxman power unit developing 3,250 bhp (2,423 kW), and has a Co-Co wheel arrangement. Enthusiasts nicknamed them "Gridirons" (or "Grids" for short), due to the grid like horn cover on the locomotive's cab ends fitted to nos. 56056 onwards. Under its Romanian railway factory nomenclature, the locomotive was named Electroputere LDE 3500, with LDE coming from Locomtiva Diesel-Electrica (Diesel-Electric locomotive) and the 3500 being the planned horsepower output. The Class 56 fleet was introduced between 1976 and 1984, a total of 135 examples were manufactured. The first 30 locomotives (56001 - 56030, factory classification LDE3500) were built by Electroputere in Romania, but these typically suffered from poor construction standards and many were withdrawn from service early for extensive rebuilding before re-entering revenue service.[3] The remaining 105 locomotives were built by British Rail Engineering Limited (BREL) at Doncaster Works (56031 to 56115) and Crewe Works (56116 to 56135). 1:148 Scale model of a Class 56 diesel locomotive decorated in Railfreight Metals livery. These models have been specially commissioned by Gaugemaster and form part of the Gaugemaster Collection Series. These models feature lots of era specific details and markings and lots of external body details as modelled on the prototype. Features: NEXT-18 DCC Decoder Socket Gaugemaster Limited Edition Detailed body with etched grills and separately fitted hand rails Darkened wheels and pin point bearings Split frame tungsten chassis 5 Pole motor for smoother operation All wheel drive All Wheel pick up Includes etched brass name and number plates Directional lighting NEM couplings Includes both standard and knuckle couplings Includes spares bag with additional detailing parts - N Scale

Dapol Class 56 '56131' BR Blue Large Logo (N)

Class 56 '56131' BR Blue Large Logo The British Rail Class 56 is a type of Co-Co locomotive designed for heavy freight work and was introduced between 1976 and 1983. In all 135 Class 56s were built, the first 30 by Electroputere in Romania but due to poor quality of construction the remainder were built by BREL at their Doncaster and Crewe works. The Class 56 was considered to be a successful locomotive and had a long service life. However performance and maintenance costs savings made from the deployment of the newly imported Class 66 resulted in most of the fleet of Class 56s being decommissioned or sold on by 2006. Several Class 56s are currently preserved and some class 56s are still in service today with private rail companies hauling freight and for the occasional special service.   Features: Retooled body with improvements to the body shape. cab roof and windows  Tooling options to accurately reproduce both Romanian and Doncaster bodyshell types Etched side and roof grilles in two styles  RP25.72 darkened wheels with pin point bearings  5 pole Super creep motor with controlled pulling power and incredible slow running speed  All wheel drive and pick up  Directional lights  Dapols low friction mechanism for efficient quiet running  Heavy split frame chassis for excellent running and haulage qualities    DCC Ready with a NEXT-18 decoder socket - N Scale

Dapol Class 56 '56302' Fastline Freight (N)

Class 56 '56302' Fastline Freight The British Rail Class 56 is a type of Co-Co locomotive designed for heavy freight work and was introduced between 1976 and 1983. In all 135 Class 56s were built, the first 30 by Electroputere in Romania but due to poor quality of construction the remainder were built by BREL at their Doncaster and Crewe works. The Class 56 was considered to be a successful locomotive and had a long service life. However performance and maintenance costs savings made from the deployment of the newly imported Class 66 resulted in most of the fleet of Class 56s being decommissioned or sold on by 2006. Several Class 56s are currently preserved and some class 56s are still in service today with private rail companies hauling freight and for the occasional special service.   Features: Retooled body with improvements to the body shape. cab roof and windows  Tooling options to accurately reproduce both Romanian and Doncaster bodyshell types Etched side and roof grilles in two styles  RP25.72 darkened wheels with pin point bearings  5 pole Super creep motor with controlled pulling power and incredible slow running speed  All wheel drive and pick up  Directional lights  Dapols low friction mechanism for efficient quiet running  Heavy split frame chassis for excellent running and haulage qualities    DCC Ready with a NEXT-18 decoder socket - N Scale

Dapol GWR 7800 Manor '7807' "Compton Manor" GW Green w/ Crest (N)

GWR 7800 Manor '7807' "Compton Manor" GW Green w/ Crest The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol GWR 7800 Manor '7808' "Cookham Manor" BR Green (Late) (N)

GWR 7800 Manor '7808' "Cookham Manor" BR Lined Green (Late) The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol GWR 7800 Manor '7810' "Draycott Manor" BR Green (Early) (N)

GWR 7800 Manor '7810' "Draycott Manor" BR Lined Green (Early) The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol GWR 7800 Manor '7814' "Fringford Manor" GWR Green (N)

GWR 7800 Manor '7814' "Fringford Manor" GWR Green The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol GWR 7800 Manor '7818' "Granville Manor" GW Green Shirtbutton (N)

GWR 7800 Manor '7818' "Granville Manor" GW Green Shirtbutton The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol GWR 7800 Manor '7800' "Torquay Manor" BR Black (Early) (N)

GWR 7800 Manor '7800' "Torquay Manor" BR Black (Early) The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol GWR 7800 Manor '7803' "Barcote Manor" BR Green (Late) (N)

GWR 7800 Manor '7803' "Barcote Manor" BR Lined Green (Late) The GWR Manor was a versatile 4-6-0 configured locomotive designed with a lighter axle loading than the existing and popular Grange class which enabled the Manor to operate in regions of the GWR where this was not possible with a locomotive of  comparable power. In all, 30 Manor class locomotives were manufactured at Swindon in two batches: 20 between 1938 and 1939 and then a further 10 post nationalisation in 1950 which were designated 5MT. Although initially the performance of the locomotive was deemed at best mediocre, subtle internal refinements made towards the mid 1950s resulted in a successful and popular locomotive. In all nine examples of the Manor survived into preservation.  Features: Pickup from loco driving wheels and tender Coreless motor Tender body to be easily removable  Space for sugar cube speaker in tender Firebox glow  DCC Ready with provision for a NEXT-18 Decoder in the tender  Locomotive to tender with electrical connections for motor and locomotive pick-up via pin and socket vertically mounted under the cab Diecast boiler Diecast footplate Appropriate Buffer types  Tall vacuum pipe on the tender  Lower vacuum on the locomotive  Smoke box number plate for B.R. period Highly detailed cab interior Diecast chassis – split frames for live bearing pick-up  Blackened nickel plated diecast driving wheels  Brass bearings  Plastic keeper plate with brake shoe/linkage details  Sprung centre driving wheels Wheels to NMRA standard - N Scale

Dapol Class 66 '66001' DB Cargo (N)

Class 66 '66001' DB Cargo  The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor      All wheel pickup              All wheel drive via re-worked smooth drive low maintenance mechanism              Die-cast chassis             DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled                 Independent directional front/rear cab lighting control           Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets     Standard NEM fitting N Gauge couplers              RP 25 wheels     Newly tooled highly detailed body and fittings   Accessory bag with etched nameplates and detailed buffer beam fittings         Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66096' EWS (N)

Class 66 '66096' EWS The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor      All wheel pickup              All wheel drive via re-worked smooth drive low maintenance mechanism              Die-cast chassis             DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled                 Independent directional front/rear cab lighting control           Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets     Standard NEM fitting N Gauge couplers              RP 25 wheels     Newly tooled highly detailed body and fittings   Accessory bag with etched nameplates and detailed buffer beam fittings         Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66531' Freightliner Racing Green (N)

Class 66 '66531' Freightliner Racing Green The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66706' "Nene Valley" GBRf Europorte (N)

Class 66 '66706' "Nene Valley" GBRf Europorte The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66734' "Platinum Jubilee" GBRf Jubilee Pink (N)

Class 66 '66734' "Platinum Jubilee" GBRf Jubilee Pink The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66779' "Evening Star" GBRf BR Lined Green (N)

Class 66 '66779' "Evening Star" GBRf BR Lined Green The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 66 '66846' Colas Rail Freight (N)

Class 66 '66846' Colas Rail Freight The Class 66 is a type of Co-Co heavy freight locomotive and was originally ordered by EWS to replace and update the freight fleet post privatisation in 1996. 250 Class 66s were ordered from General Motors Electromotive Division (EMD) and these were built in London, Ontario, Canada. Subsequent freight operators, Freightliner, GB Railfreight and Direct Rail Services (DRS) also ordered batches of these locomotives. Overall the locomotive has been successful in service, offering improved reliability and performance over its predecessors. However the locomotive has also had its critics, partly due to the comfort the design offered drivers and staff and probably their ubiquity, ousting many different types of British built locomotives commonly seen prior to its commissioning. As a testament to the commercial success of the Class 66, it has been certified for use in many European countries (known as the Series 66) and can be seen commonly in Germany, Poland and Sweden amongst others. During its long service, the locomotive has been modified many times including low emission variants for greener running and highly geared models for hauling heavier loads albeit at slower speeds. The Class 66 is still in operation and is used by DB, GBRf, Freightliner, DRS and Colas Rail.    Features: Smooth running 5 pole next generation motor All wheel pickup All wheel drive via re-worked smooth drive low maintenance mechanism Die-cast chassis DCC Sound ready, Next-18 decoder socket (recommended 6 function decoder) Independent directional front/rear main lighting control—day and night lighting with four light clusters being modelled Independent directional front/rear cab lighting control Main lamp and cab lighting override switches for DC users (Independent front/rear control)  Two cab window designs modelled     Removable self-centring close coupling mechanism with NEM pockets Standard NEM fitting N Gauge couplers RP 25 wheels Newly tooled highly detailed body and fittings Accessory bag with etched nameplates and detailed buffer beam fittings Clip-fit body for easy DCC fitting - N Scale

Dapol Class 142 142038 Regional Railways GMPTE (N)

Class 142 142038 Regional Railways GMPTE The British Rail Class 142 is a type of diesel railbus multiple unit designed to run in pairs for use on branch lines in Northern and South Western England and North Wales. Ninety six of the sets were built by BREL at Derby between 1985 and 1987 and followed on from the design of the Class 141. Initially, the Class 142 exhibited many operational problems including the inability to negotiate tight curves, a lack of power with poor braking and a rough uncomfortable ride. The class was extensively modified in subsequent years to overcome some of these shortcomings with the adoption of a more powerful diesel engine, uprated brakes and a plethora of internal and external detail improvements. Even with these changes the Class 142 was deemed unsuitable for working the tighter curves of the South Western rail system and the fleet was transferred post privatisation between NW Trains and Northern Spirit, where they are still used primarily on commuter routes between the major cities of the region.  Features: A Powered and a dummy car in each set  NEXT-18 DCC Decoder Socket Detailed bodies with flush glazing  Close coupling mechanism with corridor connectorScharfenberg coupling mechanism fitted as standard  All wheel drive and pick up on power unit  Directional lights on both carsIndependently controllable internal (where fitted) and external lighting  Accessory bag with optional fitted components  - N Scale

Dapol Class 142 142058 BR Provincial Network Northwest (N)

Class 142 142058 BR Provincial Network Northwest The British Rail Class 142 is a type of diesel railbus multiple unit designed to run in pairs for use on branch lines in Northern and South Western England and North Wales. Ninety six of the sets were built by BREL at Derby between 1985 and 1987 and followed on from the design of the Class 141. Initially, the Class 142 exhibited many operational problems including the inability to negotiate tight curves, a lack of power with poor braking and a rough uncomfortable ride. The class was extensively modified in subsequent years to overcome some of these shortcomings with the adoption of a more powerful diesel engine, uprated brakes and a plethora of internal and external detail improvements. Even with these changes the Class 142 was deemed unsuitable for working the tighter curves of the South Western rail system and the fleet was transferred post privatisation between NW Trains and Northern Spirit, where they are still used primarily on commuter routes between the major cities of the region.  Features: A Powered and a dummy car in each set  NEXT-18 DCC Decoder Socket Detailed bodies with flush glazing  Close coupling mechanism with corridor connectorScharfenberg coupling mechanism fitted as standard  All wheel drive and pick up on power unit  Directional lights on both carsIndependently controllable internal (where fitted) and external lighting  Accessory bag with optional fitted components  - N Scale

Dapol Class 142 142070 First Great Western (exFirst NW Gold Star) (N)

Class 142 142070 First Great Western (exFirst NW Gold Star) The British Rail Class 142 is a type of diesel railbus multiple unit designed to run in pairs for use on branch lines in Northern and South Western England and North Wales. Ninety six of the sets were built by BREL at Derby between 1985 and 1987 and followed on from the design of the Class 141. Initially, the Class 142 exhibited many operational problems including the inability to negotiate tight curves, a lack of power with poor braking and a rough uncomfortable ride. The class was extensively modified in subsequent years to overcome some of these shortcomings with the adoption of a more powerful diesel engine, uprated brakes and a plethora of internal and external detail improvements. Even with these changes the Class 142 was deemed unsuitable for working the tighter curves of the South Western rail system and the fleet was transferred post privatisation between NW Trains and Northern Spirit, where they are still used primarily on commuter routes between the major cities of the region.  Features: A Powered and a dummy car in each set  NEXT-18 DCC Decoder Socket Detailed bodies with flush glazing  Close coupling mechanism with corridor connectorScharfenberg coupling mechanism fitted as standard  All wheel drive and pick up on power unit  Directional lights on both carsIndependently controllable internal (where fitted) and external lighting  Accessory bag with optional fitted components  - N Scale

Hornby BR Class 50 50016 'Barham' BR Blue (TT)

BR Class 50 50016 'Barham' BR Blue 50016 ‘Barham’ entered service on the 27th April 1968. Built at the English Electric Vulcan Foundry and first allocated to LMR Western Lines under running number D416. This model represents 50016 in early 1980’s condition in its blue and yellow BR livery with small BR logos.  The model features a powerful 5-pole motor with dual bogie drive and a heavy diecast chassis for maximum traction. A HM7000-Next18 sound decoder can be fitted for control of the full lighting package and realistic class 50 sound effects using the free to download Class 50 sound profile. Specific to TT3041: Intermediate ‘domino’ marker lights. Early design roof with air intake. BR blue livery. Separate ‘Barham’ metal name plates. Common TT Class 50 Features: High detail TT Scale model based on extensive research including 3D scanning and original works drawings. Heavy diecast chassis. Model Weight is 195 grams. Powerful 5 Pole Skew wound motor with dual flywheels. Dual bogie drive with a total of 12 driving wheels. Brass axle bearings. All wheel electrical pickup. Front and rear kinematic coupling arm system. Pre-fitted acoustic speaker chamber. Next-18 Decoder socket. Cab interior lighting (requires a DCC decoder to be fitted). Night/Day Headlights (requires a DCC decoder to be fitted). Separately controllable taillights (requires a DCC decoder to be fitted). Directional lighting. Diecast metal buffers. Separately applied metal steps, grills and handrails. Accessory bag contains optional fit snow ploughs, vacuum pipes and couplings. - TT:120 Scale

Hornby LNER Class A4 4498 'Sir Nigel Gresley' LNER Garter Blue (TT)

LNER Class A4 4498 'Sir Nigel Gresley' LNER Garter Blue Built at the Doncaster works in 1937, 4498 Sir Nigel Gresley entered service in October 1937 on the London and Northeast Railway.  This model represents the locomotive in 1930’s condition with full valances and in its classic Garter blue paint scheme. A HM7000-Next18 sound decoder can be fitted for digital control and realistic A4 Class sound effects using the free to download A4 sound profile. Specific to TT3043: A4 locomotive 4498 in Garter blue with ‘Sir Nigel Gresley’ Name plates. Single Chimney. Full valances. 1928 Corridor Tender. Common TT A4 Class Features: High detail TT Scale model based on extensive research including and original works drawings. Heavy diecast chassis. Model Weight is 150 grams. High precision coreless motor. Brass axle bearings. Locomotive and Tender wheel electrical pickups. Kinematic rear coupling system. Pre-fitted acoustic speaker chamber and Sugarcube speaker. Next-18 Decoder socket. Metal buffers. Separately fitted brass safety valves and whistle. Separately fitted metal handrails. Accessory bag contains optional fit flanged trailing track wheelset, vacuum pipes and couplings. - TT:120 Scale

EFE Rail LSWR Adams T3 560 SR Lined Maunsell Green

LSWR Adams T3 560 SR Lined Maunsell Green The first LSWR T3 Class locomotive was built in 1892 and 125 years later, the T3 was thrown into the spotlight when the National Railway Museum donated the sole preserved example, No. 563, to the Swanage Railway Trust. Ever since this controversial move there has been a desire to see a OO scale model of this Victorian masterpiece, and now, we are delighted to fulfil those wishes with this brand-new model developed for Bachmann’s EFE Rail range. Employing a large number of diecast metal components to provide the optimal weight distribution needed for this 4-4-0 locomotive to perform at its best, the EFE Rail T3 is powered by a five pole motor and flywheel which is geared to the rear driving axle. DCC provision comes in the form of a Next18 decoder socket mounted in the tender, where a speaker is also fitted, meanwhile within the cab of the model a firebox lighting system has been installed which operates on both analogue and DCC. An innovative loco-to-tender coupling design provides both integral electrical connections and a close coupling feature, whilst at either end of the model NEM coupling pockets are fitted and sprung metal buffers are mounted on each bufferbeam. Each model sports an array of locomotive- and era-specific detailing as appropriate, all of which is highlighted by the ornate livery application. Details on this Model: Pristine SR Lined Maunsell Green livery Running No. 560 Etched Numberplates* Adams Boiler Drummond Chimney Adams Smokebox Door Rivetted Smokebox Saddle Traditional Suspension Fluted Coupling Rods Rear Bogie Wheel Splashers* Single Whistle Welded Lamp Irons SR Disc Head Signals* Tender Coal Rails *supplied separately for optional fitting Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 228mm (over couplings) Five pole motor with flywheel mounted in the locomotive, driving the rear set of driving wheels Electrical pickup from all driving wheels and tender wheels Separate metal bearings fitted to each driving wheel axle and each bogie wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis fitted to both the locomotive and tender Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Discreet snap-together locomotive to tender drawbar with integral close coupling mechanism and electrical connections Sprung front bogie Front bogie features a clip-in front section with optional blank filler or coupling adapter with integral coupling pocket to NEM362 standards Tender features a close coupling mechanism which is fitted with a coupling pocket to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Firebox lighting with twin LEDs operating on DC and DCC Textured filter in the firebox hole to simulate a burning coal fire Twin speakers installed in the tender of all models for optimum sound reproduction - Era 3 - OO Scale

Rapido UK Manning Wardle L Class ‘Sir Berkeley’ (Preserved)

Manning Wardle L Class ‘Sir Berkeley’ (as Preserved) Features: Manning Wardle ‘L’ Class – ‘Sir Berkeley’ Works No. 1210 of 1890 As currently preserved at the Middleton Railway Weatherboard cab Diagonal-ended Frames Double boss wheels Tapered buffer stocks E24 DCC socket (NEXT 18) Factory-fitted speaker in all models NEM coupler pockets High quality motor and mechanism High level of detail with plenty of separately fitted parts - OO Scale  

Graham Farish Class 47/0 D1601 BR Green (Small Yellow Panels)

Class 47/0 D1601 BR Green (Small Yellow Panels) The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. This model tells the story of the Class’s early days of service, sporting original features and carrying the iconic two-tone green livery in which the majority of the fleet was outshopped, complete with small yellow warning panels at either end. Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Detail Specific To This Model: Pristine BR Green (Small Yellow Panels) livery Running No. D1601 Glazed Headcode Panels Displaying Blinds 1V54 and 1A92 Twin Arm Windscreen Wipers High Intensity Headlight Round Buffers Bodyside Step below Cab Door Full Cab Roof Vents Original Three-Piece Radiator Grilles Ribbed Exhaust Panels Spanner Mk3 Roof Boiler Port 1,250 Gallon Water Tanks with Water Chutes Open Bogie-mounted Cab Steps - Era 5 - N Scale

Graham Farish Class 47/0 D1565 BR Green (Small Yellow Panels)

Class 47/0 D1565 BR Green (Small Yellow Panels) The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. This model tells the story of the Class’s early days of service, sporting original features and carrying the iconic two-tone green livery in which the majority of the fleet was outshopped, complete with small yellow warning panels at either end. Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Detail Specific To This Model: Pristine BR Green (Small Yellow Panels) livery Running No. D1565 Glazed Headcode Panels Displaying Blinds 1E11 and 4N09 Twin Arm Windscreen Wipers High Intensity Headlight Round Buffers Bodyside Step below Cab Door Full Cab Roof Vents Original Three-Piece Radiator Grilles Ribbed Exhaust Panels Spanner Mk3 Roof Boiler Port 1,250 Gallon Water Tanks with Water Chutes Open Bogie-mounted Cab Steps - Era 5 - N Scale

Hornby BR Class 37 37704 EWS (TT)

EWS Class 37 No.37704 - DCC Ready NEXT-18 Decoder Socket - TT:120 Scale

Hornby BR Class 43 HST GNER Train Pack (TT)

BR Class 43 HST GNER Train Pack 43120 & 43115 A symbol of British high-speed rail travel, the Class 43 HST is among Hornby’s latest TT:120 releases, bringing this iconic train to life in exquisite detail. This newly tooled train pack contains motorised power car (43120) and unmotorised power car (43115) in the striking blue livery of Great North Eastern Railway.  Equipped with a precision 5-pole skew wound motor as well as being DCC-ready with an 18-pin socket to ensure effortless digital integration. This train pack also features NEM tension lock couplings, directional lighting, and interior lighting within the passenger compartments to offer a further layer of realism. Pair the GNER Class 43 HST Train Pack with GNER HST Mk3 coaches for a realistic high-speed setup. Includes: 1x Powered BR Class 43 43120 'National Galleries of Scotland' 1x Dummy BR Class 43 43115 'Aberdeenshire' - DCC Ready NEXT-18 Decoder Socket - TT:120 Scale

Hornby BR Class 43 HST Virgin Trains Train Pack (TT)

BR Class 43 HST Virgin Trains Train Pack 43093 ‘Lady in Red’ & 43097 Bringing the speed and style of the late 1990s to TT:120 scale, the Virgin Trains Class 43 HST Train Pack, contains a motorised and unmotorised power cars numbered 43093 ‘Lady in Red’ and 43097 in their bold red and white livery. This newly tooled model captures the sleek, aerodynamic design of the HST, complete with accurately reproduced branding and detailing.  A powerful 5-pole skew wound motor delivers smooth and reliable performance, while directional lighting, brings an extra touch of realism. Interior lighting highlights the detail inside, creating an immersive experience whether running at full speed or waiting at the platform, with an 18-pin DCC Ready socket and NEM tension lock couplings to ensure easy connection with additional rolling stock.  Pair the Virgin Class 43 HST Train Pack with Virgin HST Mk3 coaches for a realistic high-speed setup. Includes: 1x Powered BR Class 43 43093 'Lady in Red' 1x Dummy BR Class 43 43097 - DCC Ready NEXT-18 Decoder Socket - TT:120 Scale

Hornby LMS Princess Coronation 6233 'Duchess of Sutherland' (TT)

LMS Princess Coronation 6233 'Duchess of Sutherland' Experience the grandeur of British steam heritage with the Hornby TT:120 LMS ‘Princess Coronation’ Class ‘Pacific’ 6233 ‘Duchess of Sutherland’. Designed by the legendary Sir William Stanier, this iconic 4-6-2 locomotive has been faithfully recreated in Era 3 livery and features a 5-pole skew-wound motor & NEM coupling system.  Metal buffers complete the premium finish while its DCC Ready 18-pin socket makes digital conversion effortless. Enhance your Duchess of Sutherland locomotive with a selection of Hornby’s meticulously crafted LMS coaches. - DCC Ready NEXT-18 Decoder Socket - TT:120 Scale

Graham Farish Class 47/8 47849 BR InterCity (Swallow) (N)

Class 47/8 47849 BR InterCity (Swallow)  The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, resulting in various sub-classes being used to group locomotives that had undergone the same work, or were built with similar features, such as the Class 47/4s which were those locomotives fitted with Electric Train Heating (ETH). Whilst not an official sub-class, some Class 47/4s were fitted with extended range fuel tanks allowing them to work longer distances and such machines were identified by being renumbered into the 478xx series. With their larger fuel tanks, these Class 47s were put to work on cross country routes and following Privatisation, the 47/8s were used by Virgin Cross Country. No. 47849 received its extended range fuel tanks in 1990 and was renumbered from 47570, remaining in InterCity livery long into Privatisation before it was repainted into Virgin colours in 2000 and so making this locomotive suitable for both Era 8 and Era 9 operations. Our new InterCity model takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR InterCity (Swallow) livery Running No. 47849 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cut-Cab Locomotive Cab-Front-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Kickplate below Car Door Partially Plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish Class 47/4 47555 'The Commonwealth Spirit' RF Distribution (N)

Class 47/4 47555 'The Commonwealth Spirit' BR RF Distribution European The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s served on the front line of BR services for many decades and even in the 1990s, some 30+ years after their introduction, they were still being used for top link services, like hauling the Royal Train or in this case, as part of the fleet used for freight services via the then brand new Channel Tunnel linking the UK and the mainland Europe. The Railfreight Distribution European livery, as distinguished by the large lettering on the bodyside and blue roof, was introduced in the mid-1990s and was applied to distinguish those locomotives allocated to traffic flows serving Dollands Moor and the Channel Tunnel Freight Services, which used the Channel Tunnel from its opening in 1994. Class 47/4 No. 47555 ‘The Commonwealth Spirit’, which was something of a celebrity with spotters and enthusiasts, was one of the locomotives selected for this pool and was repainted resplendently into the new livery by Tinsley which added its Yorkshire Rose depot motif to the cab sides in the process. ‘The Commonwealth Spirit’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR Railfreight Distribution European livery Running No. 47555 Named ‘The Commonwealth Spirit’ Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Spanner Mk3 Boiler Port Water Tanks Removed NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Graham Farish Class 47/7 47712 'Lady Diana Spencer' BR ScotRail (N)

Class 47/7 47712 'Lady Diana Spencer' BR ScotRail The Class 47 was British Railways’ most prolific class of main-line diesel locomotive and so it’s no surprise that high fidelity models of these ever-popular machines are available in N Scale as part of the flagship Graham Farish range. Such was their success that Class 47s went through various upgrade and refurbishment programmes during their careers, to extend their lives or ready them for new services, and the Class 47/7 sub-class is just one example – these locomotives being fitted with extended range fuel tanks and cab-front jumper cables to work push-pull trains in Scotland. No. 47712 ‘Lady Diana Spencer’ was one of the first twelve locomotives converted to a 47/7, having entered works as Class 47/4 No. 47505, and is modelled in the striking BR ScotRail livery with bold grey, white and blue bodyside bands and large yellow ends and cab rooves. The real locomotive survives in preservation today, and has recently been returned to service on the main line, in much the same 1980s condition as depicted by our model. ‘Lady Diana Spencer’ takes full advantage to the recent upgrades that have benefited the Graham Farish Class 47, namely the technical advancements which see the model boasting a Next18 DCC decoder interface, pre-fitted speaker, cab lighting (when used on DCC) and independent control of the directional lights at each end. Features: Pristine BR ScotRail livery Running No. 47712 Named ‘Lady Diana Spencer’ Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 139mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from eight wheels Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities Bogie-mounted coupling pockets to NEM355 standards at each end Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, cab handrails and roof aerial (where applicable) Separately fitted battery box/water/fuel tank assembly Cab Interior Detailing Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting, switchable on/off (when used on DCC only) Speaker installed in all models for optimum sound reproduction Details Specific to this Model: Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Cab-Front-mounted ETH Equipment Scottish Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Plated Clayton Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps - Era 8 - N Scale

Hornby BR Class 50 50049 'Defiance' GBRf (TT)

GBRf Class 50 'Defiance' 50049 - DCC Ready NEXT18-Pin Socket - Era 11  - TT:120 Scale

Hornby Birth of the Railways Train Pack (Railway 200)

Birth of the Railways Train Pack (Railway 200) Representing the formative years of steam-powered railways, these three locomotives were built between 1825 and 1838. The first is ‘Locomotion No. 1’, designed by George and Robert Stephenson. It was built at their factory in Newcastle for the opening of the Stockton & Darlington Railway, where it became the first steam locomotive to pull a passenger train on a public railway. In doing so, it became the first steam locomotive to both operate and haul a passenger-carrying train on a public railway in September 1825. 2025 marks the 200th anniversary. With the experience they gained, Robert Stephenson & Co. entered a design for the 1829 Rainhill Trials, held to find suitable motive power for the Liverpool & Manchester Railway. Their entry, ‘Rocket’, was the clear winner and formed the basis for future steam locomotive design on the L&MR, which opened the following year. By 1838, locomotive design had already moved on, and 0-4-2 No. 57 ‘Lion’, was one of a pair of ‘luggage’ locomotives built to a Stephenson patent by Todd, Kitson & Laird of Leeds, also for the L&MR. Please note: Locomotion No.1 comes fitted with a Next 18-pin socket, but due to the locomotive's size limitations, sadly it cannot take an HM7000 Next 18-pin decoder. The 'Rocket' locomotive comes fitted with a 6-pin socket. The 'Lion' locomotive comes fitted with a Next 18 socket (NEM 662). - OO Scale

Hornby GWR, Saint Class, 'Lady of Legend' 2999

GWR Saint Class - Lady of Legend 2999 As none of the original ‘Saint’ Class survived into preservation, the last being withdrawn in 1953, the Great Western Society purchased GWR ‘Hall’ Class No. 4942 Maindy Hall from Barry scrapyard in 1974 with the intention of rebuilding it as a ‘Saint’. The ‘Hall’ was a direct development of the ‘Saint’, No. 2925 Saint Martin being used as its prototype in 1924 by Charles B. Collett, Churchward’s successor as Chief Mechanical Engineer at the GWR. Work on the conversion finally got underway in 1995 and, in April 2019, No. 2999 Lady of Legend made its first moves in steam at Didcot Railway Centre. - DCC Ready 21 Pin Socket - OO scale

Hornby Class 66 66850 'David Maidment OBE' Colas Rail (TT)

Colas Rail, Class 66, Co-Co, 66850, 'David Maidment OBE' This model will feature directional and cab lighting. Night and day headlights will also be included. All the Class 66 models have 12 axles for the current pick-up and both bogies are motor-driven. - DCC Ready NEXT18 Socket - Era 11 - TT:120 Scale

Accurascale Hunslet Austerity VF5300 NCB North East 59

Hunslet Austerity VF5300 NCB North East 59 This Austerity was another wartime product, this time from the Vulcan foundry, Newton-le-Willows. It was completed in 1945 and allocated the WD number 75310. Following war dept service, the locomotive was purchased by the NCB and allocated to number 6 area, North West Durham. Particular to this area is the cut back cabs on all locomotives for working the restricted clearance of the tunnel on the entrance to Lambton coal drops at the port of Sunderland. Another smaller feature on this locomotive was the relocation of the injectors to above the running plate ahead of the cab. Both of these features are faithfully recreated on the model Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Accurascale Hunslet Austerity WGB2762 United Steel Company 18

Hunslet Austerity WGB2762 United Steel Company 18 This attractively liveried Austerity was built in 1945 by W. G. Bagnall in Stafford and was one of the 377 locomotives built for the War Department and originally carried the number 75174. When demobbed, the locomotives was purchased by the United Steel Companies and put to work on the steelworks system at Scunthorpe. Externally a virtually standard Austerity, our model carries the heavy duty “Yorkshire” buffers that were fitted to the prototype when it was in service. Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Accurascale Hunslet Austerity HC1775 BR Black Early Emblem 68025

Hunslet Austerity HC1775 BR Black Early Emblem 68025 This locomotive was one of a batch of 36 Austerities by Hudswell Clarke of Leeds. This particular one was completed in November 1944 and carried the WD number 71498. Purchased by the LNER in June 1946 the locomotive was classified as a J94 and numbered 8025. The distinctive extended bunker was fitted in November 1949 when it was renumbered 68025 and gained the early BR emblem. The locomotive was based at Darlington 51A until withdrawal in 1963. The locomotive did not survive and was cut up shortly after. The model replicates the period after 1949 and carries the extended bunker, smokebox numberplate and additional steps and handrails on the tank Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Graham Farish LMS 10000 BR Green (Late Crest)

LMS 10000 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodyside Steps Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Graham Farish LMS 10001 BR Green (Late Crest)

LMS 10001 BR Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and now, this pioneering pair is available in N scale as part of the Graham Farish range. Features: Pristine BR Green (Late Crest) livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Modified Exhaust Panels (with vent grilles) Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm (over couplings) Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Removable coupling pockets to NEM355 standards fitted to each bogie Designed to operate on curves of second radius (263.5mm) or greater Bogies constructed from multiple components featuring full relief detail, including separately fitted metal sand pipes Separately applied underframe and roof detail components Separate lamp irons fitted to each nose Detailed cab interior Each model supplied with a full set of model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Passenger/Freight mode, switchable on Analogue control and with additional configurations available when used on DCC Cab lighting, switchable on/off (leading end, when used on DCC only) Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LMS 10000/10001 using recordings from real locomotives - Era 5 - N Scale

Hornby Inter-City 125 High Speed Train Set (TT)

Inter-City 125 High Speed Train Set This train set includes: Class 43 HST power car numbered E43063 Class 43 HST dummy car numbered E43062 two Mk3 TS coaches numbered E42064 and E42065 a transformer a train controller a buffer stop a full curve a power straight a standard straight a 3rd full curve a left-hand point a re-railer. No.E43062 No. E43062 was built by British Rail Engineering Limited at Crewe in September 1977 and was outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43062 was initially part of the 254004 set. It was repainted in an InterCity Swallow livery after a few years in service. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997, including 43062. The Class 43 locomotive was repainted in a Virgin red and black livery for use on CrossCountry services. Virgin handed over ten HST power cars in 2002. 43062 was given to Network Rail for use as part of the New Measurement Train (NMT). The locomotive was outshopped in a bright Network Rail yellow livery and because of this, the train was often referred to as the ‘Flying Banana’. The NMT travels at 125mph to monitor and record any faults on the track. 43062 was named ‘John Armitt’ after the chairman of the UK’s National Infrastructure Commission and had a red nameplate fitted. Loram UK won a Network Rail £8-million five-year contract to maintain the NMT in 2020. 43062 was recently overhauled at Loram Derby and returned to traffic in January 2024 with No. 43257 at the rear. No. E43063 No. E43063 was built by British Rail Engineering Limited at Crewe in September 1977 and outshopped in a BR blue and grey livery. The locomotive was first allocated to the Bounds Green (BN) depot and 43063 was initially part of the 254004 set. On 18th May 1991, 43063 could be seen at the Laira depot in a repainted InterCity Swallow livery and continued in service with this livery until 1997. As British Railways prepared to be privatised, it sold its HSTs to Virgin in 1997. 43063 was the first locomotive to be repainted in a Virgin CrossCountry red and black livery. Hon. Lord James Douglas-Hamilton QC & MP named the locomotive ‘Maiden Voyager’ to mark the launch of Virgin CrossCountry services, the same name given to Virgin’s first jumbo jet. Nameplates were fitted at Edinburgh station on 6th January 1997. 43063 ran in service with this name until the nameplates were removed in October 1999. In 2002, Virgin handed over 43063 to FGW who repainted it in a FGW blue and purple livery. Between 2006 and 2007, the locomotive faced an overhaul at Brush Traction and was fitted with an MTU 16V4000 R41 engine. FGW was renamed Great Western Railway in September 2015 and 43063 continued in service under the new name. Six GWR Class 43 HST power cars were stored at the Laira depot in 2020 and 43063 was among them, becoming a spares donor. - TT:120 Scale

Rapido UK Class 44 – D5 “Cross Fell” BR Green With Small Yellow Panel

Class 44 – D5 “Cross Fell” BR Green With Small Yellow Panel Details on this Model: D5 “Cross Fell” BR green with small yellow panel Livery & TOPS panel Bodyside steps Inner and outer bogie sandboxes Features: Directional Lighting Next18 Decoder Socket High quality motor and drive mechanism for smooth running DCC Sound option NEM Coupler pockets Separately fitted wipers A selection of discs so you may apply your chosen headcode Etched radiator fan grill BR ordered ten new Co-Cos from Derby Works as part of its appraisal of comparative locomotive designs (dubbed the ‘Pilot Scheme’). They were inspired by the LMS’ and Southern’s pioneer diesel designs and were outwardly similar to English Electric’s Type 4 (subsequently Class 40). Although fitted with a Sulzer 12LDA28 diesel engine capable of 2,300hp, the new BR Type 4s were heavy. Their 133 ton weight required a 1Co-Co1 wheel arrangement. The first, D1, emerged from Derby in 1959 and was named Scafell Pike. The remaining nine locomotives were also named after English and Welsh peaks and the class soon gained the nickname ‘Peak’, which was also applied to the subsequent Class 45s and Class 46s. Although a mixed traffic design, they were initially used on West Coast Main Line passenger services before being transferred en masse to the Midland Main Line. The subsequent arrival of the Sulver Type 4s (later Class 45) meant that the BR Type 4s (which would become Class 44 on TOPS) were allocated predominantly to freight work radiating out from Toton. Consequently, they could be seen as far afield as York or Severn Tunnel Junction. Any small class of locomotive was always under threat and the ‘44s’ were no exceptions. 44003 was withdrawn in July 1976 and all had gone by the end of 1980. Happily, two survive: D8 Penyghent is based at Peak Rail and D4 Great Gable is owned by the Peak Locomotive Company and is based at the Midland Railway-Butterley. - N Scale

Graham Farish LNER V2 60845 BR Lined Black (Early Emblem) (N)

LNER V2 60845 BR Lined Black (Early Emblem) Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine BR Lined Black Early Emblem livery Running No. 60845 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes BR Smokebox Door with Numberplate and with Higher Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Graham Farish LNER V2 4791 LNER Lined Green (Original) (N)

LNER V2 4791 LNER Lined Green (Original)  Some twenty years since the V2 was first produced in N scale by Graham Farish, this all-new model of the LNER Mixed Traffic icon is made to standards not even dreamt of twenty years ago. Often described as ‘the engines that won the war’, these new Graham Farish models are sure to win the heart of any discerning N scale enthusiast. Depicting one of the LNER’s most successful steam locomotive designs, this masterpiece in miniature captures the look and the character of the prototype to a tee. With highly detailed mouldings and many separate parts used on both the locomotive and tender, including era- and prototype-specific detailing to allow accurate models of any given class member throughout their working lives, the performance of these new V2s is just as impressive as their appearance. A powerful coreless motor and flywheel is incorporated into the diecast locomotive chassis, powering the driving wheels which run in separate metal bearings. With electrical pickup from the driving wheels and tender wheels and the option to have traction tyres fitted to one driving wheelset, this new V2 is on a steady footing as soon as it hits the rails. With a Next18 DCC decoder socket and pre-fitted speaker located in the tender, this model is future proofed for those wishing to operate on DCC, with or without sound. What’s more, a SOUND FITTED version is also available providing realistic sound effects on both analogue and DCC straight out of the box! Detail Variations Specific To This Model: Pristine LNER Lined Green (Original) livery Running No. 4791 Original ‘Monobloc’ Cylinder Casting with Inside Steam Pipes LNER Smokebox Door without Numberplate and with Lower Top Lamp Bracket Later Style Rocker Arm Guides Group Standard Tender with High-Front/Low-Rear Coal Space Dividers Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 141mm Coreless motor with flywheel Electrical pickup from all driving and tender wheels Separate metal bearings fitted to each driving wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 9mm (N gauge) wheels to NEM310 standards with authentic profile and detailing Sprung front pony truck Cartazzi truck with flanged wheelset (with side swing for operational necessity) Optional traction tyres fitted to the rear driving wheels (replacement wheelset without traction tyres supplied in the accessory pack) Valve gear of metal construction Discreet fixed locomotive to tender drawbar with integral electrical connections Coupling pocket to NEM355 standards fitted to the front pony truck Removable coupling pocket to NEM355 standards fitted to the tender chassis Designed to operate on curves of second radius (263.5mm) or greater Speaker installed in the tender of all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Graham Farish LNER V2 Class using recordings from real locomotives - N Scale

Hornby The Scotsman Train Set (TT)

The Scotsman Train Set A journey on a Pullman service would be regarded by many as the pinnacle of rail travel in the steam era. The LNER A1 4-6-2 locomotive and complementary Pullman coaches included in this set represent how the Flying Scotsman™ may have looked in the LNER heyday of the 1930s, that being the Flying Scotsman service and not the somewhat famous locomotive named after it. This service would run non-stop between Edinburgh and London, departing at 10:00 in each direction. This set contains a starter oval of track and a siding providing a good size layout for you to get started. This included circuit can be expanded with our easy-to-add track extension packs. This set features working lights in the coaches. Includes: 1x LNER A1 4-6-2 'Blink Bonny' Locomotive 1x Pullman Coach 'Cecilia' 1x Pullman Coach 'Chloria' 1x Pullman Brake Coach 'Car No.64 Third Class' Oval of Track Controller Loco is DCC Ready NEXT 18 Socket - TT 1:120 Scale  

Graham Farish LMS 10001 BR Lined Green (Late Crest) 10001

LMS 10001 BR Lined Green (Late Crest) 10001 The Graham Farish model of No. 10001 is a highly detailed masterpiece in miniature, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of the prototype, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a coreless motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. The Next18 DCC decoder socket and a pre-fitted speaker make it easy to equip these models for DCC and even add sound, or why not opt for our SOUND FITTED model and enjoy realistic sound effects straight out of the box – whether you’re running on analogue or DCC! Coupled with No. 10000, the LMS Twins will make the perfect addition to any early-BR layout. Features: Pristine BR Lined Green (Late Crest) livery Running No. 10001 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 127mm Coreless, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Designed to operate on curves of second radius (263.5mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - Era 5 - N Scale

Bachmann Baguley-Drewry 70hp Diesel ICI Orange & Grey

Baguley-Drewry 70hp Diesel ICI Orange & Grey The diminutive Baguley-Drewry marks Bachmann’s first foray into the world of narrow gauge diesels for the Bachmann Narrow Gauge OO9 scale range. These 70 horsepower machines were originally built for use at Royal Naval Armament Depots (RNAD) which employed narrow gauge networks to move armaments between storage locations and transhipment sites. The perfect complement to the Bachmann Narrow Gauge RNAD Wagons, these diesel locomotives pack a lot into a small space with a high proportion of diecast parts to provide the 4-wheel locomotives with a running performance befitting the prototype. Several details are fitted separately, including the air filter mounted on top of the bonnet, headlights (non-functional) at the front and rear of the cab, windscreen wipers and, inside the cab, chairs and controls are modelled too. The coreless motor, which is fitted with a flywheel, provides drive to both axles – each of which run in separate metal bearings. Electrical pick-up comes from all wheels whilst the couplings are mounted into NEM coupling pockets – these can be removed and the bufferbeams swapped out for fully detailed alternatives that do not feature the cut-outs required for the OO9 coupling. All of this detail is brought to live by the livery application which uses authentic colours, logos and typefaces to portray a locomotive in use with industrial giant ICI. The maker’s name is carried on the front of the locomotive whist the window frames are picked out in silver and the cab interior is decorated, but the icing on the cake for this model is the ‘wasp stripes’ at either which really bring it to life. Features: Pristine ICI Orange & Grey livery Running No. 05 587 Accessory Pack NEM Coupling Pockets Powerful Coreless Motor and Flywheel Detailed and Decorated Cab Interior Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 59mm (over couplings) - Era 8 - OO-9 Scale

Graham Farish Class 158 2-Car DMU 158729, ScotRail Saltire

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine ScotRail Saltire livery Running No. 158729 Two-Car Unit comprising car Nos. 52729 & 57729 Destination blinds for Dundee Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Radio Pod on Roof Revised Air Conditioning (Type B) Toilet Discharge via CET Tank Cummins Engine Revised Heather Scottish Air Dam Sanding Gear Fitted Revised LED Light Cluster Plated Gangway Doors - Era 9 - N Scale

Graham Farish Class 158 2-Car DMU 158824 Arriva Trains Wales (Revised)

The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, all but one of the original units remain in traffic to this day. This all-new Graham Farish model follows in the footsteps of the brand’s award winning Class 319 Electric Multiple Unit and captures this iconic prototype to a tee. The pinnacle of N scale second generation DMUs, the Graham Farish Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, each vehicle sports uninterrupted views of the interior which is fitted out with tables, chairs and even metal luggage racks – made visible thanks to the saloon lighting. The inter-vehicle coupling system ensure that the two vehicles work together in harmony and enables the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker, it’s easy to fit sound to your model Features: Pristine Arriva Trains Wales (Revised) livery Running No. 158824 Two-Car Unit comprising car Nos. 52824 & 57824 Destination blinds for Aberystwyth Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 315mm Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle Four axle drive (all axles on the DMS (A) vehicle) Electrical pickup from all wheels Highly detailed bodyshell with flush, tinted glazing Unobstructed interior including seat and table detail Bogies constructed from multiple components featuring full relief detail Separately applied underframe equipment and detail components Separately applied metal detail parts, including exhaust guards and interior luggage racks Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions Detail Variations Specific To This Model: Radio Pod on Roof Revised Air Conditioning (Type A) Toilet Discharge via CET Tank Cummins Engine Revised Heather Scottish Air Dam Sanding Gear Fitted Revised LED Light Cluster Plated Gangway Doors - Era 9 - N Scale

Graham Farish Class 158 2-Car DMU 158750 GWR Green (FirstGroup)

Class 158 2-Car DMU 158750 GWR Green (FirstGroup) Includes: - Pristine GWR (FirstGroup) livery - Running No. 158750 - Two-Car Unit comprising car Nos. 52750 & 57750 - Destination blinds for Penzance - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate) Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type A) - Toilet Discharge via CET Tank - Cummins Engine - Revised Heather - Scottish Air Dam - Sanding Gear Fitted - Revised LED Light Cluster - Plated Gangway Doors Lighting: - Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control - Cab and saloon interior lighting, switchable on/off via the under-chassis switches - Authentic light colours and temperatures selected for each model based on era and application DCC: - Next18 DCC decoder interface – one decoder required per unit - Easy-access DCC decoder socket located behind removable panel on underside of DMS (B) Sound: - Speaker installed in all models for optimum sound reproduction - Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - SOUND FITTED models operate on DCC and Analogue control as supplied Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours - Era 9 - N Scale

Graham Farish LMS Ivatt 2MT 6409 LMS Black

LMS Ivatt 2MT 6409 LMS Black This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times.  MODEL FEATURES: - Pristine LMS Black livery - Running No. 6409 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Length 112mm - Era 3 - N Scale IVATT 2MT HISTORY: Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network. With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today.

Graham Farish Class 158 2-Car DMU 158711 ScotRail Saltire

Class 158 2-Car DMU 158711 ScotRail Saltire Includes: - Pristine ScotRail Saltire livery - Running No. 158711 - Two-Car Unit comprising car Nos. 52711 & 57711 - Destination blinds for Edinburgh Waverley - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate)   Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type B) - Toilet Discharge via CET Tank - Cummins Engine - Revised Heather - Scottish Air Dam - Sanding Gear Fitted - Revised LED Light Cluster - Plated Gangway Doors   Lighting: Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application   DCC: Next18 DCC decoder interface – one decoder required per unit Easy-access DCC decoder socket located behind removable panel on underside of DMS (B)   Sound: - Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions SOUND FITTED models operate on DCC and Analogue control as supplied   Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours  

Graham Farish Class 158 2-Car DMU 158766 GWR Green (FirstGroup)

Class 158 2-Car DMU 158766 GWR Green (FirstGroup) Includes: - Pristine GWR (FirstGroup) livery - Running No. 158766 - Two-Car Unit comprising car Nos. 52766 & 57766 - Destination blinds for Bristol Temple Meads - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B - Coreless, twin shaft motor with two flywheels providing drive to both bogies of the DMS (A) vehicle - Electrical pickup from all wheels - Working miniature BSI Couplings at the cab ends (alternative air dams are included to allow this feature to work on second radius curves or less) - Designed to operate on curves of second radius (263.5mm) or greater - Separately applied metal detail parts, including exhaust guards and interior luggage racks - Each model is supplied with an accessory pack comprising exhaust pipes and cab end connector door covers (where appropriate)   Detail Variations Specific To This Model: - Radio Pod on Roof - Revised Air Conditioning (Type A) - Toilet Discharge via CET Tank - Cummins Engine - Revised Heather - Scottish Air Dam - Sanding Gear Fitted - Revised LED Light Cluster - Plated Gangway Doors   Lighting: Directional lighting, including illuminated destination panels, switchable on/off at either end on DCC or Analogue control Cab and saloon interior lighting, switchable on/off via the under-chassis switches Authentic light colours and temperatures selected for each model based on era and application   DCC: Next18 DCC decoder interface – one decoder required per unit Easy-access DCC decoder socket located behind removable panel on underside of DMS (B)   Sound: - Speaker installed in all models for optimum sound reproduction Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions SOUND FITTED models operate on DCC and Analogue control as supplied   Livery Application: - Authentic liveries applied to both vehicles including interior decoration - Multiple paint applications employed using BR and corporate specification colours - Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours  

Graham Farish LMS Ivatt 2MT 6418 LMS Black

LMS Ivatt 2MT 6418 LMS Black The popular LMS Ivatt 2MT returns to the Graham Farish N scale range following upgrades to allow SOUND FITTED models to be offered for the first time. With every model now featuring a Next18 DCC decoder interface and pre-fitted speaker. This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times.  MODEL FEATURES: - Pristine LMS Black livery - Running No. 6418 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Length 112mm - Era 3 - N Scale

Graham Farish LMS Ivatt 2MT 46447 BR Lined Black (Late Crest)

LMS Ivatt 2MT 46447 BR Lined Black (Late Crest) The popular LMS Ivatt 2MT returns to the Graham Farish N scale range following upgrades to allow SOUND FITTED models to be offered for the first time. With every model now featuring a Next18 DCC decoder interface and pre-fitted speaker. This Award Winning model certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, lubricators and sand boxes along the running plate and separate pipework running from below the cab to the top feed on the boiler. The turned brass safety valves and whistle contrast beautifully with the firebox on which they are mounted, whilst inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls. A hinged tender fall-plate provides the finishing touch to the highly impressive cab of this model. When it comes to performance it’s hard not to marvel as you watch the Walschaerts valve gear in motion. The powerful coreless motor provides drive to the centre pair of driving wheels, whilst all six driving wheels are fitted with separate metal bearings and a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times.  MODEL FEATURES: - Locomotive is now Preserved - Pristine BR Lined Black (Late Crest) livery - Running No. 46447 - Accessory Pack - NEM Coupling Pockets - Powerful Coreless Motor - Loco-drive Mechanism - Tender Pick-ups - Speaker Fitted - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Length 112mm - Era 5 - N Scale

Graham Farish Class 90/0 90017 'Rail Express Systems Quality Assured' RES

Class 90/0 90017 'Rail Express Systems Quality Assured' Rail Express Systems The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example depicts No. 90017 ‘Rail Express Systems Quality Assured’ in Rail Express Systems livery. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. FEATURES: Pristine Rail Express Systems livery Named ‘Rail Express Systems Quality Assured’ Running No. 90017 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers (Pantograph end) / Round (Non-Pantograph end) Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 9 - N Scale

Graham Farish Class 90/0 90048 Freightliner G&W

Class 90/0 90048 Freightliner G&W The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example is decorated in the orange, yellow and black scheme of Freightliner Genesee & Wyoming, depicting No. 90048. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. FEATURES: Pristine Freightliner G&W livery Running No. 90048 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Rectangular Freight Buffers Screw link Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Era 9 - N Scale

Graham Farish Class 90/1 90139 BR Railfreight Distribution Sector

Class 90/1 90139 BR Railfreight Distribution Sector The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this model is finished as No. 90139 in BR Railfreight Distribution Sector livery. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package. FEATURES: Pristine BR Railfreight Distribution Sector livery Running No. 90139 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Screw Link Couplings TDM Cables fitted to the Buffer Sides Small Battery Charger Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Era 8 - N Scale

Graham Farish Class 90/0 90002 'Mission: Impossible' Virgin Trains (Original)

Class 90/0 90002 'Mission: Impossible' Virgin Trains (Original) The award winning Class 90 returns to the Graham Farish range twelve months after its grand unveiling. A pinnacle of British N scale Electric Locomotives, this example depicts No. 90002 ‘Mission: Impossible’ in original Virgin Trains livery. Combining a highly accurate and detailed body shell with an authentic chassis and bogies, plus a fine reproduction of the Brecknell Willis high-speed Pantograph – the Graham Farish Class 90 captures the distinctive shape and character of the real locomotives to a tee. Add to this the impressive technical specification which includes a coreless motor with twin flywheels, all wheel drive and all wheel pickup, plus directional lights and, when used on DCC, cab lights too, and it’s easy to see why this model is the complete package.  FEATURES: Pristine Virgin Trains (Original) livery Named ‘Mission: Impossible’ Running No. 90002 Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567B Length 126mm   DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Original ‘Clipped’ Buffers Rubbing Plates Buckeye Couplings TDM Cables fitted to the Buffer Sides Large Battery Charger Battery Boxes and Switch with Smooth Sides and Sliding Access - Era 9 - N Scale

Graham Farish BR Standard 5MT with BR1 Tender 73006 BR Lined Black (Late Crest

BR Standard 5MT with BR1 Tender 73006 BR Lined Black (Late Crest) The Graham Farish model brings all the power and presence of the prototype to N scale and this masterpiece in miniature certainly packs a punch when it comes to the detail, with separate metal handrails found throughout the locomotive and tender, brass chimney and safety valves and separate pipework running from below the cab to the injectors on the boiler. Inside the cab, the moulded back head detail has been decorated to pick out the individual gauges and controls, whilst below the running plate, the Walschaerts valve gear is something to behold, especially when the locomotive is in motion. A powerful coreless motor provides drive to the centre driving wheels and each driving wheel is fitted with separate metal bearings whilst a pair of traction tyres are fitted to the rear driving wheels to aid traction. Electrical pick-up comes via all six driving wheels and all six tender wheels, with a semi-permanent loco-tender coupling system to ensure the two stay firmly coupled at all times. FEATURES: Pristine BR Lined Black (Late Crest) livery Running No. 73006 Coupled to a BR1 Tender Accessory Pack NEM Coupling Pockets Powerful Coreless Motor Loco-drive Mechanism Tender Pick-ups Speaker Fitted Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 136mm   - Era 5 - N Scale

Graham Farish Class 90/0 90042 Freightliner 'PowerHaul'

Class 90/0 90042 Freightliner 'PowerHaul' Includes: - Pristine Freightliner ‘Powerhaul’ livery - Running No. 90042 - Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A - Rectangular Freight Buffers - Screw link Couplings - TDM Cables fitted to the Buffer Sides - Large Battery Charger - Battery Boxes and Switch with Hinged Access Panels which are Ribbed - Coreless, twin shaft motor with two flywheels providing drive to both bogies - All axle drive - Electrical pickup from all wheels - Separate metal bearings fitted to each axle - Accessory Bag - N scale Locomotive information and history: Fifty Class 90 locomotives were ordered by British Rail in 1986 to replace the ageing Class 85 fleet on West Coast Main Line duties, whilst also allowing BR to cascade a number of Class 86s to East Anglia. Constructed at British Rail Engineering Limited, Crewe, the new locomotives were initially classified as 87/2s however this was soon changed to Class 90 as the design featured a completely new body-shell – although much of the technology within was shared with the Class 87s.   Construction of the 110mph rated locomotives was completed in 1990 and the fleet was split between different sectors of British Rail – 15 were allocated to InterCity services, five for Rail Express Systems (mail and parcels traffic) and the remaining 30 for Railfreight Distribution. Most of those allocated to Railfreight Distribution would later be downgraded to 75mph and reclassified as 90/1s numbered in the 901xx series following work to isolate the Electric Train Heating and push-pull equipment making them dedicated freight locos. Upon privatisation the Class 90 fleet was split between Virgin Trains, EWS and Freightliner. By 1999 all of the Class 90/1s acquired by EWS had been converted back to 90/0s due to an increased requirement for passenger locomotives to work contracted ScotRail sleeper trains and for hire to GNER for East Coast Main Line services. Further renumbering by EWS occurred when nine locos were fitted with different brake blocks and these became Class 90/2s numbered in the 902xx series. The Freightliner locos were also converted back to their original specification in the early 2000s. The Class 90s have carried numerous liveries including three decorated in European liveries for the Freightconnection event in 1992 which coincided with the opening of the Channel Tunnel to freight services. No. 90128 was decorated in SNCB turquoise (Belgium), No. 90129 in DB red (Germany) and No. 90130 in SNCF orange and grey (France) and each carried the name Freightconnection in their respective languages, alongside No. 90022 which was named ‘Freightconnection’ and carried Railfreight Distribution livery.   The majority of the Class have carried names whilst in service and the 90s have appeared a variety of other post-Privatisation liveries such as GNER, DB Schenker, First ScotRail, One (Anglia), Greater Anglia, National Express, DRS and Malcolm Logistics. Today, Class 90s remain in operation with Freightliner, DB Cargo UK (ex-EWS/DB Schenker) and most recently Locomotive Services which has acquired Nos. 90001 and 90002 and repainted them into InterCity Swallow livery for use on charters and excursions.