Tamiya US Infantry Weapons Set (1:35)

Tamiya - US Infantry Weapons Set Military Miniatures - 1:35 Scale

Tamiya Schwimmwagen T166 (Wide Wheel) (1:35)

Schwimmwagen T166 (Wide Wheel) (1:35)

Tamiya Russian Heavy Tank JS3 Stalin (1:35)

Russian Heavy Tank JS3 Stalin - 1:35 scale

Tamiya M1 Super Sherman (1:35)

M1 Super Sherman Following Israel's declaration of independence in 1948, the Israeli Defense Forces (IDF) chose the M4 Sherman as its first mainstay tank. In the mid-1950s, the IDF purchased a sizable number of M4A1 Shermans, which were armed with the 76.2mm M1 gun, to counter Arab armies' T-34-85s. These tanks were designated M1 Super Sherman according to their armament in order to distinguish them from earlier variants equipped with 75mm guns. Many featured curved cast hulls, air-cooled radial gasoline engines, and Vertical Volute Spring Suspension (VVSS). They first saw action when the Suez Crisis broke out on October 29, 1956, and some soldiered on until the 1970s. Features: ★1/35 scale plastic assembly kit of the M1 Super Sherman. Length: 210mm, Width: 75mm.  ★The distinctive form of the tank including its curved cast hull and 76mm main gun is accurately reproduced based on thorough study of a full-size museum exhibit.  ★The model depicts a late-type vehicle featuring the muzzle brake and one-piece loader's hatch.  ★Realistic VVSS details and T54E1 tracks.  ★Commander and loader figures, plus 3 types of markings included.

Tamiya German 3 Ton 4x2 Cargo Truck (1:35)

German 3 Ton 4x2 Cargo Truck From 1937 to 1944, over 78,000 medium 3ton 4x2 Cargo Trucks were produced and they became the most recognized German army truck in WWII. It featured a durable rear wheel-drive chassis with superior off-road handling and a large cargo area, which enabled superb load-carrying capacity. They were used until the end of war to transport troops and supplies on all fronts. Features: ★This is a 1/35 plastic assembly model of German 3ton 4x2 Cargo Truck.  ★Length:174mm Sturdy body and unique cabin are all realistically reproduced.  ★Accurately recreated forward-bent chassis, and suspension features fewer parts for easy assembly.  ★Movable front wheels for perfect diorama situations.  ★The rear cargo area has a realistic wood pattern for greater realism.  ★Masking stickers for windows are included in kit.  ★1 driver and 1 navigator figure and four different markings included.  ★Comes with sets of fuel drums and jerry cans.

Tamiya German 8ton Semi-Track 3.7cm Flak 37 Sd.Kfz.7/2 Armored Cab(1:35

German 8ton Semi-Track 3.7cm Flak 37 Sd.Kfz.7/2 Armored Cab Type As WWII progressed and German forces lost their air superiority amid fierce Allied raids in the sky, Germany looked to bolster ground to air defense with the development of self propelled anti-aircraft guns based upon tanks and half-track vehicles. The 8ton half-track (Sd.Kfz.7/2) was one of those such weapons. The half-track chassis employed had a proven track record towing 88mm guns, but was now fitted with its own 3.7cm anti-aircraft cannon that could fire 160 rounds per minute. Produced from 1943, later variants were also fitted with armor on the driver seat and radiator. Features: ★This is a 1/35 scale plastic model assembly kit. Length: 200mm, width: 70mm.  ★The functional form of the vehicle is accurately captured, including a realistic depiction of the complex half-track suspension.  ★The model can be assembled with its tailgate in raised or lowered position. Plastic netting is also included to raise realism.  ★The 3.7cm anti-aircraft cannon features excellent attention to detail, right down to the breech and mount.  ★Includes explosive and armor piercing shell parts.

Tamiya German 5cm Anti-Tank Gun Pak 38 (1:35)

German 5cm Anti-Tank Gun Pak 38  First delivered to units in July 1940, the Pak 38 5cm was a successor to the 3.7cm Pak 36. It featured design upgrades such as a muzzle brake, aluminum alloy trail legs, and a gun shield composed of two sheets of 4mm plate; using Panzergranate 39 shells it defeated 61mm of 60-degree armor from 500 meters. First deployed in the Balkan theater in Spring 1941, the Pak 38 also saw action in the invasion of the Soviet Union, crossing swords with the famed T-34 and KV-1, while in North Africa it fought against the Matilda and Valentine British tanks. 9,600 of this trusty weapon were manufactured up to 1943. ★The Pak38 form is depicted in style.  ★Realistic renderings of sighting device, breech, gun barrel with muzzle brake, double armor plate gun shield, suspension and solid tires.  ★An ergonomic suspension parts breakdown offers plenty of detail.  ★Assemble the model in firing or towed state.  ★Comes with commander, gunner and two other crew figures in realistic pose, plus shells, casings and other accessories. - Plastic Kit Requires Glue & Paint to Complete - 1:35 Scale

Tamiya West German Leopard Tank (1:35)

West German Leopard Tank About the Model ★This is a 1/35 scale plastic model assembly kit depicting the Leopard, the first tank manufactured domestically by the former West Germany.  ★From the powerful 105mm gun to the refined lines, the form of the tank is captured in style.  ★Features realistic recreations of cast metal surfaces, plus metal engine grille components. ★Comes with one torso figure and decals for decoration. - 1:35 Scale

Tamiya Sd.Kfz.2 Kettenkraftrad Mid Production (1:35)

Sd.Kfz.2 Kettenkraftrad Mid Production A Trusty Servant The smallest of the WWII German half-track vehicles, the Kettenkraftrad was nonetheless a major presence and active in many duties. It featured a central engine and a motorcycle handlebar at the front, with superlative balance and the power and mobility to take on rough terrain. Over eight thousand were produced during WWII, and those manufactured between 1943 and 1944 had distinctive features such as a rounded taillight base, plus reinforcing plates on the armrests of the rear seat. About the Model ★This is a 1/35 scale plastic model assembl kit. Length: 139mm (with trailer), width: 29mm. ★The unmistakeable form of the Kettenkraftrad is depicted in style, right down to the complex suspension setup.  ★Features ergonomic recreations of engine and transmission, plus an opening engine hatch. ★Assembly type tracks utilize one-piece straight sections, with separate parts for the pads. ★Comes with a driver and two other figures. - 1:35 Scale

Tamiya Sand Bag Set (1:35)

Sand Bags This is a 1/35 scale plastic model assembly kit recreating sandbags that will add a whole extra level of realism to your diorama scenes. ★Includes forty-eight sand bags.

Tamiya M561 Gama Goat (1:35)

M561 Gama Goat  At Home Off of the Beaten Track Originally commissioned in 1966 as an off-road, amphibious vehicle, the M561 Gama Goat was a 6-wheel drive truck consisting of a 4-wheel tractor and a 2-wheel carrier module. What really set it apart from other vehicles of its type, however, was its employment of an articulation joint between the two modules that allowed them to move independently of one another: a most useful skill when traversing rough terrain. The 14,000 Gama Goats produced up to 1973 were used in a variety of roles by both the U.S. Army and Marine Corps, and were deployed in the fighting in Grenada in 1983, although by the start of the 1990s the Gama Goat had been largely phased out. The former half of its unusual nickname came from Roger Gamaunt, designer of the key articulation joint, and the latter half from its tenacious goat-like climbing ability. About the Model ★1/35 scale plastic model assembly kit of the M561 Gama Goat.  ★Length: 170mm, Width: 62mm.  ★The model accurately captures the unique and powerful 2-module form of the M561.  ★Articulation joint is recreated using a poly cap and provides authentic movement.  ★Includes optional front windscreen and winch parts.  ★Realistic depiction of the complex 6-wheel suspension is achieved with uncomplicated assembly.  ★Comes with 1 figure and 3 marking options. - 1:35 Scale

Tamiya M36 US Tank Destroyer (1:35)

M36 US Tank Destroyer  As U.S. forces encountered the rapidly evolving armor of their German opponents, it became clear the the M10 tank destroyer and its 76.2mm gun were insufficient and in need of replacement. Their solution was to install the more powerful 90mm gun onto the M10A1 chassis in an open top turret: the M36, which first appeared in June 1944. Its first live action was in fighting on the French-German border that October, but if faced more concerted fighting as the German forces launched a desperate counter-attack in the Battle of the Bulge in December 1944. Over a thousand M36 vehicles had been manufactured by the time of the German surrender in May 1945, and after the end of hostilities many were given to allies such as France, which used it in the First Indochina War. It is even said to have been used in the Japanese development of their first domestic post-war tank: the Type 61. About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 216mm, width: 88mm.  ★Tamiya designers based this product's design on extensive studies of the full-size M36.  ★The turret interior has realistic depictions of details such as the 90mm gun breech and sights, shell racks, crew seating and more.  ★A slide molded recreation of the bulging turret rear counterweight accurately captures the curved design and gives a fuss-free assembly process.  ★Bulkheads and sponson-top shell racks show great detail.  ★Assembly type tracks have one-piece straight sections.  ★Comes with a figure posed with a shouldered "grease gun."  ★Includes a painting guide and two marking options. - 1:35 Scale

Tamiya Jeep Willys MB. 1/4-Ton Truck (1:35)

Jeep Willys MB. 1/4-Ton Truck - Plastic Kit Requires Glue & Paints to Complete - 1:35 Scale

Tamiya German Pz. Kpfw. III Ausf. L (1:35)

German Pz. Kpfw. III Ausf. L  From the beginning and through to the middle stages of WWII, the Pz.Kpfw.IIIs along with the Pz.Kpfw.IVs were the core tanks used by German tank divisions. Each variant of the Pz.Kpfw.III including the Ausf.L was highly reliable, came armed with a long barreled 60 caliber 50mm gun and had reinforced armor. This is a 1/35 scale plastic assembly model kit of one such Ausf.L tank. Famous characteristics of the Ausf.L which include the driver's front panel and main gun mantlet have been realistically reproduced. The fighting compartment loading area, turret interior, and commander’s seat have been reproduced. You can also choose to assemble each hatch in either open or closed positions. Accessory parts seen on the hull such as spare tracks and tools feature a precise finish. A tank commander figure is included. - Plastic Kit Requires Glue & Paint to Complete - 1:35 Scale

Tamiya Pz.Kpfw. I Ausf.B (1:35)

Pz.Kpfw. I Ausf.B  The Pz.Kpfw.I was the first mass-manufactured tank produced by Germany since the post-WWI armor restrictions imposed by the Treaty of Versailles. The initial 1934 Ausf.A variant was followed in 1936 by the upgraded Ausf.B, which saw engine power increased from 57hp to 100hp, as well as a chassis that was some 40 centimeters longer. It was armed with a pair of MG13 machine guns, fired by the commander. Although originally intended only for training use, the Pz.Kpfw.I in fact saw action in the Spanish Civil War from 1936, and then in the German invasions of Poland (1939), France (1940) and the Balkans (1941), and even the ill-fated invasion of the Soviet Union in 1941. ★ This is a 1/35 scale plastic model assembly kit. Length: 123mm, width: 60mm. The compact form is captured in style based on extensive research of the actual tank.  ★ Slide molded upper hull and turret feature fine detailing.  ★ The track beam is recreated accurately.  ★ Assembly type tracks have one-piece straight sections.  ★ The model comes with a torso figure and a choice of head sections (beret or side cap).  ★ 3 marking options are included (for units in Poland, France and on the Eastern Front). ★ 1:35 Scale

Tamiya KS600 Motorcycle & Sidecar (1:35)

KS600 Motorcycle & Sidecar  Includes: - Plastic kit - Detailed bike with distinctive form with pressed steel frame - Road signs are printed on the packaging side and can be cut out to display with your model. - Detailed figures Include an NCO figure for the side car, a rider and a standing soldier - Length: 71 mm - Width: 47mm - Kit requires glue and paint to complete NOT included - 1:35 Scale

Tamiya British 2-Ton 4x2 Ambulance (1:48)

British 2-Ton 4x2 Ambulance  Includes: - Detailed plastic kit - Pre-coloured plastic parts - Clear parts for headlights and windscreen - Front grill and cab detail - Full underframe represented - Wheel and suspension detail - Driver figure included - Two sets of waterslide transfers/decals included - Kit requires glue and paint to complete NOT included - 1:48 Scale Vehicle information and history: Around 13,000 examples of this sturdy and reliable 2-ton 4x2 ambulance were produced during WWII; based upon a civilian truck, it was designed with the input of the Medical Corps and had bench seats that could be converted into two-level beds. It served in France, North Africa, Italy, and even across Western Europe after the Normandy invasion, and was often seen not just with Army units, but also at airfields and the like.

Tamiya King Tiger Prod. Turret (1:35)

King Tiger Prod. Turret Includes: - Detailed plastic kit - Heavy built body recreated - Henschel Turret featuring welded lines - Moving turret escape hatch - Interior details include gun breech and shell racks - Other hatches can be designed to be open or closed - Nylon mesh included for engine vent covers - Separate suspension arms - Belt type tracks - Commander figure - Waterslide transfers/decals - Kit requires glue and paint to complete NOT included - 1:35 Scale Vehicle information and history: The King Tiger made its debut in 1944, toward the end of WWII, and proved a fearsome foe to the Allies, with 150mm and 80mm armor on the hull front and sides respectively, and a powerful 700hp Maybach HL230-P30 engine. The first fifty had a Porsche-designed turret, but thereafter mass-produced King Tigers had an updated turret designed by Henschel. The L/71 88mm gun was upgraded from the Tiger I, and could defeat 170mm of armor from a kilometer away. Some 430 of these King Tigers were produced until the end of the run in March 1945, proving a constant threat to the end.

Tamiya M4A3 Sherman w/75mm Gun & 3 figures (1:35)

Tamiya - M4A3 Sherman w/75mm Gun & 3 figs. Includes: - Highly detailed plastic kit - Body work features surface texture of casting and hull weld lines - 75mm gun turret   - Two kinds of commanders cupolas  - Loaders hatch and hull, turret hatches can be modelled in either open or closed positions. - Two kinds of road wheels and sprockets can be selected  - Rubber padded tracks - Three crewman and One Tank commander    - Figures wear late WW2 winter uniforms with rich detail - Equipment accessories included ammunition boxes, tripod, ration boxes - Three types of waterslide/decals included - Kit requires glue and paint to complete NOT included - 1:35 Scale   Vehicle information and history: It was late 1944 and Germany was clearly losing the war. Russia was closing in on the Eastern front while American bombing raids were devastating German cities. Italy had been liberated and the Allies were quickly moving through France and the Low Counties. The end looked near for Germany unless they could succeed in a great offensive push, which is exactly what they attempted. On December 16, 1944, an American sentry reported countless "pinpoints of light" flickering along the German line. Seconds later, shells exploded around him and he realized that the lights were the muzzle flashes of hundreds of German guns. A massive German counteroffensive was underway along the 85-mile Ardennes front. In the north, the Sixth Panzer Army struck the U.S. 99th and 2nd Divisions. In the center, the fifth Panzer Army hit the 106th Division, the 14th Cavalry Group and part of the 28th Division. In the South, the Seventh Army clashed with the U.S. 4th, 9th and 28th Armored Divisions. Although the Allies were initially sent reeling, courageous troops and rugged armor such as the Sherman tank eventually turned the tides of battle. One of the most used versions of this tank was the 75mm gun-equipped M4A3 Sherman, which used a V8 450hp Ford engine. The late production version first rolled out of the factories in February 1944 with an angled front hull and 63.5mm armored plate. To the turret, a cupola for the commander and hatch for the loader were added. This version was also equipped with wet ammo storage bins, which helped prevent internal fires, a weakness of earlier Shermans.

Tamiya U.S. Multiple Gun Motor Carriage M16 Half Track (1:35)

Multiple Gun Motor Carriage M16 Half Track Includes: - Detailed plastic kit - Realistic wheel, Track suspension and vehicle ladder underframe detailing - Quadruple 12.7mm Browning heavy machine guns - Positioning turret - Vehicle and Figure Accessories - Three Figures in realistic poses - Waterslide transfers/decals - Kit requires glue and paint to complete NOT included - 1:35 Scale  Vehicle information and history: The progress of the air force and the improved mobility made with the mechanization of the ground troops greatly changed the way battles were fought during World War II. With this in mind, many kinds of anti-aircraft weapons were developed to fight against enemy aircraft attacks, which led to fierce battles seen at every front. One such anti-aircraft machine seen during WWII was the M16 self propelled gun which was manufactured from 1942 to 1943. Fitted on the M3 half-track chassis was the quad mounted 50-caliber (12.7mm) Browning automatic heavy machine gun, which had an 893m/s muzzle velocity, 6,767m range, and a discharging rate of 450-555 rounds per minute, which earned it the nickname of "the meat chopper." The Type M45 gun mount could rotate 360 degrees and elevate between -10 and +90 degrees and was electrically driven which allowed it to move 60 degrees of rotation/elevation per second. Not only was it greatly effective against enemy aircraft, it was also very influential on the ground attack. Even after WWII, the M16 was also deployed with the Japanese Ground Self Defense Forces during the Korean War.

Tamiya M3A2 Half Track U.S. Armoured Personnel Carrier (1:35)

M3A2 Half Track U.S. Armoured Personnel Carrier Includes: - Detailed plastic kit - Body and exterior detaining includes loaded accessories - Interior detailing - Armament - Mounted Gun - Nine figures in various poses  - Track, wheel and suspsension detailing - Waterslide transfers/decals - Kit requires glue and paint to complete NOT included - 1:35 Scale

Tamiya US M151A1 Utility Truck Vietnam War (1:35)

US M151A1 Utility Truck Vietnam War 1959 marked the first appearance of the M151, a vehicle which stood the test of time and served the U.S. military for a number of years. Based on a lightweight semi-monocoque and independent suspension with coil springs, it represented a leap forward in design from WWII predecessors. The M151A1 was an evolution of the vehicle which debuted in 1964 and featured design tweaks such as rear suspension improvements and turn signals on the front fenders. This versatile vehicle could be seen deployed in many different roles during the Vietnam War. Includes: - Detailed plastic kit - Interior and cab detail - Grill and front detailing - Turn signals and rear suspsension modifications captured  - Option for either U.S Marine Corps or U.S Army Spec - Comes with the Hood modelled in up position. - Driver figure in suitable pose - 2x Sets of waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya Valentine MK.II/IV (1:35)

Valentine MK.II/IV  The lighweight, compact Valentine was an infantry tank first deployed in 1940 by British forces. It came as a welcome addition for the beleagured British who had been forced into a desperate evacuation from Dunkirk, during which precious materiel had to be left behind. A total run of over 7,000 units (produced in Britain and Canada) made the Valentine the most prolifically produced British tank during WWII. The Mk.II/IV variant was equipped with the 40mm 2-pounder gun, and featured a 130 hp diesel engine as well as a "slow motion" coil sprung suspension system that gave it ample mobility for the infantry tank role. It débuted in November 1941 in North Africa, and was still serving in Tunisia, in May 1943. Valentines were also passed in significant numbers to the Soviet Union under the "lend-lease" program. They were used largely in reconnaissance roles. Includes - Detailed plastic kit - Accurate Gun - Body and engine detail - Belt assembly for tracks - Cast metal and armor plate surface textures are faithfully depicted - 2x torso figures - 3x sets of waterslide transfers/decals (covering British Army and Red Army vehicles). - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya U.S. 2.5-TON 6x6 Cargo Truck (1:35)

U.S. 2.5-TON 6x6 Cargo Truck During WWII, over 800,000 2 1/2-ton 6x6 cargo trucks were produced and became a symbol of the American victory along with the Sherman tank and the Jeep. Among them was a troop carrier of which approximately 57,000 units were made. This is a plastic assembly model kit of one such truck. The highly durable and tough form has been precisely reproduced. Features such as the robust suspension and the split type differential have a rich detailed finish.  Includes: - Detailed plastic kit - Extensive body detailing  - Tyre and underframe detailing - Cab interior and back trailer - Jerry Cans, shovel detail, various accessories - Seated driver figure  - 5x sets of Waterslide transfers/decals - kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya Sherman Easy 8 Euro Theatre (1:35)

Sherman Easy 8 Euro Theatre The U.S. M4 Sherman tank was undoubtedly one of the symbols of WWII, deployed in great quantities and numerous variants to counter the potent threat of German armor. One such variant was the M4A3E8, which was one of the final Sherman types and thus had the benefit of design improvements developed from experience in battle. These included a hardy welded late production hull, plus the welcome addition of the 76mm main gun. It was also fitted with new Horizontal Volute Spring Suspension (HVSS), and wider tracks, making for the significantly more comfortable ride that led to the M4A3E8's nickname of "Easy Eight." They were thrown into their maiden operation in the Battle of the Bulge in December 1944 as part of the 4th Armored Division under General Patton's overall command, contributing to the relief of the besieged town of Bastogne and the eventual triumph of the Allies in the European Theater. Includes - Detailed plastic kit - Extensive hull, metal surface detailing - Belt track parts - Drive sprockets - Engine and grill detail - Clear parts for headlight lenses and cupola vision blocks - Commander Torso figure - 2x sets of waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya Panzerkampfwagen III Ausf N (1:35)

Panzerkampfwagen III Ausf N (1:35) During the middles stages of WWII, most German military vehicles had trouble providing adequate support to troops, therefore the N type tank was built to help solve this problem. The N type tank replaced its Marder III main battery with a 7.5cm gun which could fire high-performance high-explosive bursting projectile shells. From June 1942 through to August 1943, existing J, L, & M models also received these upgrades and 663 tanks were fitted, and another 37 were also upgraded later in 1944. In the summer of 1942 these tanks appeared on the battlefield with their highly explosive shells, and they proved to be highly efficient in their role of reinforcing the ground troops. They were deployed into newly organized heavy tank battalions, to make up for the lack of Tiger I tanks. As a support tank, the N type was easy to manage and very reliable, and in the latter half of WWII it fought at many fronts.   Includes: - Detailed plastic kit - Accurate short Barrel 7.5cm gun reproduced from aluminium - Grill etchings - Loading area detail - Smoke discharger on left and right of turret - 2x Commander figures  - 4x Sets of waterslide transfers (including Russian and African fronts) - Track and wheel detail - Kit requires glue and paint to complete NOT included) - 1:35 Scale

Tamiya PBR31MkII PIBBER (1:35)

PBR31 MkII PIBBER This high-speed, heavily armed small craft was used heavily by U.S. forces in the Mekong Delta region.  Includes: - Detailed plastic kit - 4x figures - Various Machine guns plus grenade launcher - Various Accessories  - Base stand  - Waterslide transfers/decals - Kit requires glue and paint to complete NOT included - 1:35 Scale

Tamiya Pz.Kpfw. IV Ausf. H Early Version (1:35)

German Pz.Kpfw. IV Ausf.H Early Version During WWII, the most important tank used by German forces throughout the entire conflict, and also the most produced was the Pz.Kpfw.IV. This is a 1/35 scale plastic assembly model kit of the German Pz. Jpfw. IV Ausf.H Early Version which is generally regarded as the definitive model of the Pz.Kpfw.IV tanks.  Includes: - Detailed plastic kit - Track and wheel detailing - Tank commander figure wearing a winter issue jacket - 75mm Turret and detailed body work with 2x types of hull front plating - Waterslide transfer/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya Russian Heavy Tank KV-2 (1:35)

Russian Heavy Tank KV-2 Vehicle information and history: In December 1939 the KV-1 was officially adopted by the Soviet military; it was followed by the KV-2, a heavier design based upon the KV-1 chassis, but upgunned to a 152mm howitzer with the intention of breaking enemy strongholds; in order to accomodate the larger gun, the KV-2 was given a remarkably tall turret. Around two hundred were produced, and supply to the military began in July 1940. The following June, Nazi Germany invaded and the KV-2 - while suffering a number of breakdowns - took part in Soviet resistance against the invaders, their 152mm guns and impressive survivability enabling some amazing feats, helping stem the tide. Includes - Detailed plastic kit - Body and surface metal detailing - Accurate turret detailing - Wheel and track accurately represented  - Hatches can be modelled in open or closed positions - Full body commander figure - Crew torso figure for installation in the hatch - 2x sets of markings as waterslide transfer/decals - Kit requires glue and paint to complete NOT included) - 1:35 Scale

Tamiya M5A1 with 4 Figures (1:35)

M5A1 with 4 Figures The M3 Stuart was the representative U.S. light tank in the early years of WWII. An improved version, called the M5A1, was officially accepted for service in September 1942. Powered by two 110hp Cadillac V8 engines, it was capable of a maximum speed of 58km/h. Armament consisted of a 37mm main gun and three 7.92mm machine guns, and the turret was notable for having additional armor attached to protect the anti-aircraft machine gun position. 6,800 examples were produced from January 1943 to June 1944 and they served mainly in reconnaissance units on the Italian and Western European fronts. Some tanks used during the fighting in Normandy were seen with hedgerow cutters attached to their hulls. Includes: - Detailed plastic kit - Accurate Gun detailing - Body and engine detail - Depicts a tank equipped with distinctive hedgerow cutters - Track and wheel details - 4x figures include a machine gunner and 3x infantry figures firing mortars - 2x sets of waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya Matilda MKIII/IV British Infantry Tank (1:35)

Matilda MKIII/IV British Infantry Tank (1:35) The Matilda was developed as a heavily armored infantry tank and was the British Army's main tank in North Africa during WWII. It swept aside Italian opponents and was respectfully called the “Queen of the Desert” by German forces. During Operation Battleaxe to lift the siege of Tobruk in June 1941, German forces famously used their 88mm AA guns in the anti-tank role as they were the only effective counter against Matildas. The Matilda wrote her name into the history books as a highly effective tank which continually proved her worth during many fierce battles throughout North Africa. Includes: - Detailed plastic kit - Accurate Gun and gun mantlet - Body and engine detail - Hull features plate weld and metal surface finish - Belt assembly for tracks - 3 x figures include full body Commander and 2x torso figures - 3x sets of waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya Panther D Ausf D (1:35)

Panther D Ausf D  The Ausf.D was the debut variant of the famed German WWII tank Panther. It offered a complete performance package, with firepower from the imposing L/70 7.5cm gun, excellent protection afforded by its sloped armor, and maneuverability thanks to a roaring 700hp gasoline engine. Around 840 Ausf.D Panthers were produced between January and September of 1943, and the first time it appeared on the battlefield was in the Battle of Kursk in July of that year. While it wasn't all smooth sailing, Panthers were still able to take out some 140 Soviet tanks from a range of 1,500 to 2,000 meters, all the while protected impeccably by their sloped plate. The Ausf.D was followed by improved Ausf.A and G variants, and while the Panther was unable to stop the tide from turning against Germany it nonetheless revolutionized German armored vehicle design, and remained on the front line until the end of hostilities. Includes: - Detailed plastic kit - Accurate Gun detailing with turret-side smoke dischargers - Body and engine detail - Surface texture such as cast metal mantlet and steel armor plating - Belt tracks, wheel and suspension detailing - 2 x figures include Torso of Commander and 1x crewman stood behind turret - 3x sets of waterslide transfers/decals including The Battle of Kursk - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya Kubelwagen Type82 (Africa) (1:35)

Kubelwagen Type 82 (Africa) During WWII, the German Kübelwagen was greatly used at many fronts including North Africa. It was of a simple construction and came powered by a tough air-cooled engine and was greatly trusted by the German soldiers. The Kübelwagen type 82 which was seen at North Africa, featuring balloon type tires which allowed it to perform even on the desert sands, is now realized as a plastic assembly model kit. Includes: - Detailed plastic kit - Fully Cab interior detail - Extensive body detailing - Standing soldier figure wearing shorts and a short sleeved shirt - Accurate Balloon tyres - Jerry cans, shovels and accessories - Waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya M2A2 Bradley ODS IFV Iraq '03 (1:35)

M2A2 Bradley ODS IFV Iraq 03 Production of the M2 began in 1980, and the vehicle received plenty of updates thereafter; one notable variant was the M2A2 ODS (Operation Desert Storm), which was deployed from 1996 and took on board lessons from service in the Gulf War earlier that decade. Many of its upgrades were electronic, including an improved navigation system backed up by laser rangefinder and digital compass antenna sensor, plus the VLQ-8 missile countermeasure device. Combat Identification Panels (CIP) were added to the hull sides and rear in an effort to avoid friendly fire incidents, and the M2A2 ODS was active in the Iraq War in early 2003. Includes: - Extensive detailed plastic kit - Accurate Body detail and Bomb plating - Wheel and track detailing - 2x versions of the 25mm gun barrel included (standard, or design with improved heat dissipation). - 2x torso figures - a commander with body armor and a gunner.  - 3x Iraq War vehicle marking waterslide transfers/decals - Combat Identification Panels are joined by accessories such as sleeping rolls to give your model a busy look - A wealth of accessories to be included - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya M4A3 Sherman w 105mm Howitzer (1:35)

M4A3 Sherman w 105mm Howitzer  Excelling in both reliability and sheer production capability, the M4 Sherman series of tanks became the staple fighting-vehicles of the WWII Allies. The first version to be produced, the cast-hull M4A1, was succeeded by the welded-hull M4, the diesel engine M4A2, and finally the most widely-known tank of the series, the M4A3. Three types of main armament were used on the M4A3: on the initial production types, the 75mm main gun and on the subsequent types, the 76mm main gun for heightened penetration. Finally, to provide heavy fire support for assaults on enemy outposts, the powerful 105mm howitzer was later adopted. The 105mm howitzer was carried in a M52 combination mount and a vision cupola was fitted for the commander with a small hatch for the loader. It could fire M1 shells at angles from -10 to +35 degrees at a maximum range of 11,500m. About 500 of the M4A3 (105mm) were produced at the Chrysler factory in Detroit from May to September 1944. From September 1944 horizontal volute spring suspension was introduced on the M4A3 (105mm) together with the wider center-guide T66 tracks. The M4A3 (105mm) were deployed to European Theatre from July 1944, and played an indispensable role in the destruction of enemy positions by the U.S. infantry fighting on the front lines. Includes - Extensively detailed plastic kit - Smooth form of the cast turret with 105mm howitzer and welded hull of this late production M4A3 tank overflow with realism. - Commander's cupolas, loader's hatch and other hull and turret hatches can be modeled in the open or closed position. - 2x kinds of road wheels and sprockets can be selected - Rubber padded tracks - 3x infantrymen and one tank commander in realistic poses - Included equipment includes ammunition boxes, tripod, ration boxes, and much more. - 3x sets of waterslide transfers/decals - Kit requires glue and paint to complete (NOT included). - 1:35 Scale

Tamiya German Tiger I Early Production (1:35)

German Tiger I Early Production Vehicle information and history: The Tiger I needs little introduction, this legendary 88mm gun-toting AFV being the subject of countless war tales. Early production versions of the Tiger I were rushed from the factories by the end of 1942, bound for the harsh realities of the Eastern Front and the conflict with Soviet Russia, as well as the sweltering climes of North Africa. This kit recreates an early production variant, from the weighty overall design down to parts such as the turret with circular cupola, smoke dischargers, and large pistol port. Hull details such as air cleaners. Includes: - Detailed plastic kit - Represents early production version  - Realistic rough surface finish - Accurate 88mm Gun represented. - Track and wheel detailing - Figure in turret hatch  - 6x sets of Waterslide transfers/decals  - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya German Tiger I Mid Production (1:35)

German Tiger I Mid Production The German Tiger I Tank featured a powerful 88mm gun as well as an excellent armor and was the greatest opponent to Allied forces during WWII. The mid-production variant of which 1,354 units were produced from July 1942 to August 1944.  Includes: - Detailed plastic kit - Mechanically- complicated suspension - Loaders Hatch  - Turret gunner figure  - Link type assembly tracks - Body detailing - waterslide transfers/decals - Kit requires glue and paint to complete NOT included - 1:35 Scale

Tamiya Jerry Can set (1:35)

Jerry Can set Jerry cans used by the German army featured a functional design. Early-type cans featured simple cross-shaped indentations for structural reinforcement while later types had more complex indentation patterns. Early-type cans were seen from the Polish campaign to North Africa and the beginning of the Russian campaign, and some were continuously used until the latter half of the war. Includes: - Detailed plastic kits - Cross-shaped indentations and an indication of the "Kraftstoff 20L"are faithfully reproduced. - May be installed on Early-WWII German vehicles such as 6x4 truck Krupp Protze - Shell crates, jack, Notek light, and convoy marker. - Kit requires glue and paint to complete NOT included - 1:35 Scale  

Tamiya King Tiger Ardennes Front (1:35)

King Tiger Ardennes front In 1944, German forces unleashed a new terror on their foes - the King Tiger. The first fifty were produced with a turret designed by Porsche; thereafter, the mass production version used a Henschel turret. Packing a hefty punch with an L/71, 88mm gun and with armor up to 150mm on the front and 80mm on the sides, the King Tiger was a menace to Allied forces during the desperate December 1944 German offensive there. The DKW NZ350 motorcycle was produced from 1940, and later in the conflict some were seen with a smaller headlight and slimmer fender. Includes: - Extensively detailed plastic kit - Heavy, bulky appearance of armour plating accurately modelled - 88mm Turret - Nylon mesh is used to recreate engine cover - Grilles can be given even more detail with the use of a separately sold photo-etched parts set 2x tanker figures in realistic uniform and pose.  - Full track and wheel detailing - A DKW NZ350 is depicted with late war features such as a knee pad-less fuel tank, and comes with a rider figure with U-boat crew jacket. - Set of waterslide transfers/decals  - Kit requires glue and paint to complete (NOT included) - 1:35 Scale 

Tamiya German Tank 'Jagdpanther' (late) (1:35)

German Tank 'Jagdpanther' L.V. WWII saw numerous German tank destroyers come onto the scene, many of them a combination of existing tank chassis with a dedicated fighting compartment added; the Jagdpanther was perhaps the most successful design. It was based upon the Panther tank, and fitted with a sloped fighting compartment with 88mm gun. Manufactured from January 1944, its superb mobility and survivability made it a foe to be wary of for Allied forces after its introduction following the Normandy landings. Late version vehicles had alterations such as a larger gun shield and were deployed until the end of hostilities. Includes: - Detailed plastic kit - Accurate recreations of weld lines and metal surfaces - Track and wheel detailing - Engine grills - 88mm gun has elevation and lateral motion - Rear hull has moving hatch is a moving part  - Commanders seat and bulkhead are seperate parts - Details can be modelled in open or closed positions - Turret figure - 2x sets of waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya German Pzkpw IV Ausf. D (1:35)

German Pzkpw IV Ausf. D Includes - Detailed plastic kit - Accurate short barrelled 75mm gun turret - 3x figures in uniforms worn during invasions of Poland and France in the opening years of WW2 - Parts to recreate either early or late production variants - Track and wheel detail - Engine detail - Waterslide transfers/decals - Kit requires glue and paint to complete NOT included - 1:35 Scale 

Tamiya German Schwimmwagen Type 166 (1:35)

German Schwimmwagen Type 166 The 4WD Schwimmwagen which earned the trust of German Soldiers with excellent performance on bad roads and fording ability. Includes: - Detailed plastic kit - Body hull shape underside accurately reproduced via slide molding - Windshield is moveable  - Air-cooled four cylinder engine detail - Interior detailing includes flooring, seats and instrument panel - Folded canvas roof - Driver figure in suitable pose - Waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale 

Tamiya German Sturmgeschutz III Ausf.G (1:35)

German Sturmgeschutz III Ausf.G During WWII, the German army used self-propelled guns in large quantities with one such gun being the German Sturmgeschutz III. This kit realistically reproduces the form of the Ausf.G early version which was manufactured from December 1942. The distinctive low silhouette of the StuG III, with the fighting compartment mounted onto the Panzer III's hull, features great scale realism. Includes: - Detailed plastic kit - Kit allows to depict the Stug 3 with either a 7.5cm anti-tank howitzer or the 10.5cm gun used to support the infantry units. - Body and turret detailing - Accurate Track and wheel detailing - Armour plating over the tracks - 2x figures in relaxed poses feeding and holding puppy - Waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya U.S. M41 Walker Bulldog (1:35)

U.S. M41 Walker Bulldog Includes: - Detailed plastic kit - 72mm gun accurately captured - Metal, rough cast surface finish  - Weld plate lines depicted - 1x Commander Figure - 2x Soldier figures - 2x sets of Waterslide transfers/decals include U.S Army or Japan Ground Self defense force vehicle - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya U.S. M48A3 Patton (1:35)

U.S. M48A3 Patton The American M48A3 Patton tank, which served with distinction during the Vietnam War.   Includes: - Detailed plastic kit - Tough appearance of the tank, including its cast metal surface texture and canvas section of the gun mantlet . - The searchlight and machine gun cupola accurately reproduced - Accessories include parts such as an engine exhaust snorkel, jerry cans, and spare track links - 2x Tank crew  - Track and wheel detailing - Waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya U.S.M1A1 Abrams (1:35)

U.S.M1A1 Abrams The U.S. M1A1 Abrams Main Battle Tank, the world’s most powerful tank which featured 120mm smoothbore gun, superb fire-control system that uses a laser rangefinder, and an impressive gas turbine engine.  Includes: - Detailed plastic kit - Accurate body and detailing - Features 12.7mm and 7.62mm guns - Smoke dischargers - Nylon mesh to depict rear rack - Commander and loader figures - Wheel and track detailing - Waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya Tent Set (1:35)

Tent Set Tent kit represents a WW2 German Africa Corps tent Includes: - Plastic kit - Option to model tent with flaps open or closed - German Africa Corps Soldier in seated position - Jerry Can and Radio equipment included - Kit requires glue and paint to complete NOT included - 1:35 Scale

Tamiya Tiger I Late Version (1:35)

Tiger I Late Version During WWII, the German Tiger I was greatly feared by Allied forces for its thick armor and powerful 88mm gun. The model of the German Tiger I late production variant was put in production from January 1944 and appeared on the Normandy front. Includes: - Detailed plastic kit - Powerful 88mm gun , periscope on Commander's cupola and pressed steel wheels accurately replicated - Shell loading area  - Opening hatches  - Underside detailing - 2x types of gun barrels and gun mantlets to build the last production model - Commander figure included - Track and body detailing - Waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya SAS British Pink Panther (1:35)

SAS British Pink Panther Includes: - Detailed plastic kit - Accurate body and detailing - Tyres represent that used in desert  - Gun and weapon detailing - Figure of driver - Waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya Panther G/Late Version (1:35)

Panther G/Late Version After its appearance in mid-1943, the Panther was one of the mainstays of German armor through to the end of WWII. The Ausf.G (type G) variant was available to troops from 1944, and was itself upgraded in the second half of the year: fixes included an alteration to the lower section of the gun shield to stop direct hits from entering the crew space, and it was given more of a jutting design to further improve survivability; damped exhausts improved nighttime stealth; and air intakes were added on the engine grilles to supply the crew with warm air in cold conditions. Mobility, offensive power and survivability - the Panther achieved a remarkable balance of the three that made it a giant among WWII armor. Includes: - Detailed plastic kit - Realistic recreation of metal, rough cast surface finish - Reinforced gun shielding - Moving rear escape hatch -Depiction of the gun loading breech - Commander, driver, radio operator hatches can be modelled open or closed - Seperate parts used to depict suspension arms - Track and wheel extensively detailed - 2x Tank crew figures in winter uniform - 3x sets of waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale   - Gun and turret detailing  

Tamiya Panther Type G Early Version (1:35)

Panther Type G Early Version Initial encounters with the T-34 in 1941 were something of a shock to invading German troops, who had until that point experienced general success with their armored forces. Their response was the Panther, first fielded in 1943. The Ausf.G (Type G) variant followed on from Ausf.D and Ausf.A Panthers; debuting in March 1944, it featured sloped armor, a powerful 700hp Maybach HL-230 engine and a fearsome 75mm gun - all that added up to an imposing combination of firepower, mobility and survivability which proved a boon for German forces and something of a headache for the Allies. Includes: - Detailed plastic kit - Early spec recreated with Hell weld lines - Turret and gun detailing - Hatches can be made to be open - interior detailing - 1x Figure in overalls - Belt type  tracks - 4x sets of waterslide transfers/decals - kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya German Sd.Kfz7/1 20mm Flakvierling (1:35)

German Sd.Kfz7/1 20mm Flakvierling Includes: - Detailed Plastic kit - Body and underframe detailing - Cab and gunner detailing - Track, wheel and suspension detailing - 5x figures in various poses in winter uniforms - Waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya German Sturmgeschutz IV (1:35)

German Sturmgeschutz IV Includes: - Detailed plastic kit - 75mm gun-equipped Sturmgeschütz IV deployed by Nazi Germany in WWII captured - Optional Hull with front cement block  for armour reinforcement and Schurzen side armour plates - Wheel and track detailing - 1x Commander figure in suitable pose - Waterslide transfer/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya Hanomag Sd.Kfz. 251/1 (1:35)

Hanomag Sd.Kfz. 251/1 Includes - Detailed plastic kit and figures - Vehicle includes interior and cab detail  - Opening rear hatch - 5x figures in authentic poses - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya A34 Comet British Cruiser Tank (1:35)

A34 Comet British Cruiser Tank This ALL-NEW model kit recreates the British Cruiser Tank A34 Comet in 1/35 scale! At the end of WWII, the British Army developed the Comet – which became a base of later British Army tanks such as the Centurion - as a counter for the powerful German Tiger and Panther tanks. With the hull design based upon the structure of the existing armoured cruiser tank Cromwell, the Comet employed a larger turret with a powerful 17-pounder gun. The Comet first saw action in Operation Varsity in March 1945, and around 900 including ones produced after WWII were built. Features: 1/35 scale plastic model assembly kit. Length: 219mm, width: 88mm. The vertical-plane hull features box style assembly – accurately assembled with two bulkheads like the actual tank Features realistic renderings of front hull and turret cast surfaces, and gun shield canvas cover surface. Clear parts are included to render searchlight on turret left side. Assembly type tracks have one-piece straight sections. Choose from one-piece or two-piece (right and left) split type of the engine exhaust cover “Normandy Cowling’’. Includes two torso figures to depict crew with winter clothes. Comes with a choice of two marking options to recreate 11th Armoured Division tanks which saw action during WWII.   - 1:35 Scale

Tamiya Tiger 1 Early Production/ Eastern Front (1:48)

TIGER 1 Early Production/ Eastern Front  Includes - Plastic kit - Optional detailing parts - Detailed wheel and tracks to make up - Optional markings for 2x variants - Waterslide decals/transfers - Kit requires glue and paint to complete NOT included - 1:48 Scale 

Tamiya Russian T-62A Tank (1:35)

Russian T-62A Tank Includes - Detailed plastic kit - Turret and body detailing - Track and wheel detailing - Tank crew - Waterslide transfer/decals - Kit requires glue and paint to complete NOT included - 1:35 Scale

Tamiya R35 French Light Tank (1:35)

R35 French Light Tank  A Doughty Light Tank By the 1930s French military planners could no longer ignore the obsolescence of their masterpiece FT17 tank from late WWI, and work started on a genuine successor to fill the void. One of the answers they came up with was the R35 light tank, which utilized rolled steel lower and three-piece cast upper hull designs and was armed with the short barreled 37mm gun. It was crewed by two. When hostilities with Nazi Germany burst into life in May 1940 the R35 was right in the front line. While it showed its armor was reliable, the 37mm gun was inadequate when it came to taking out German armor. The Fall of France in June 1940 meant that production of the R35 was curtailed to approximately 1,600 units. Includes - Highly detailed Plastic kit - Turret detail - Track and wheel detail - Commander Figure included - Comes with two early WWII marking options. - Waterslide transfers/decals - Kit requires glue and paint NOT included - 1:35 Scale

Tamiya M18 Hellcat (1:35)

M18 Hellcat, US Tank Destroyer Includes - Highly detailed Plastic kit - Turret and body detail - Track Detail - Figures and accessories - Transfers/Decals - Kit requires glue and paint to complete NOT included - 1:35 scale plastic kit

Tamiya Sherman M4A3E8 Easy Eight (1:48)

Sherman M4A3E8 EASY EIGHT - 1:48 scale plastic kit - Requires glue & paints (not included)  

Tamiya British Cromwell Mk.IV (1:48)

Tamiya - British Cromwell Mk.IV 1:48 scale plastic kit Requires glue and paints to complete (not included)

Tamiya British Small Staff Car 10HP (1:48)

British Small Staff Car 10HP Includes: - Staff Car - 1x driver figure - Kit requires glue and paint to complete (Not Included) - 1:48 Scale  

Tamiya German Kubelwagen Type 82 (1:35)

German Kubelwagen Type 82 - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya German Machine Gun Troops (1:35)

German Machine Gun Troops - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya German Motorcycle Orderly Set (1:35)

German Motorcycle Orderly Set - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya German Mounted Infantry (1:35)

GERMAN MOUNTED INFANTRY  Includes - Pack of plastic figures and horse in realistic poses - Variety of weapons represented - Kit requires glue and paint to complete NOT included - 1:35 Scale

Tamiya German Panther Med. Tank (1:35)

German Panther Medium Tank - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya German Panzer Grenadiers (1:35)

German Panzer Grenadiers - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya German Panzerkampfwagen II (1:35)

German Panzerkampfwagen II Ausf F/G Tank Includes: - Tank Crew member riding in turret - 4x Combat Figures  - Kit requires glue and paint to complete (Not Included) - 1:35 Scale  

Tamiya German Pioneer & Goliath set (1:35

German Pioneer & Goliath set - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya German 2cm Flakvierling 38 (1:35)

German 2cm Flakvierling 38 - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya German 37mm Anti-tank (1:35)

German 37mm Anti-tank - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya German Front-Line Infantrymen (1:35)

German Front-Line Infantryman - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya German Fuel Drums (1:35)

German Fuel Drums - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya German Horch Type 1A (1:35)

GERMAN HORCH TYPE 1A  Includes - Plastic kit - Interior detail - Exterior detail features - Waterslide transfers/decals - Kit requires glue and paint to complete NOT included  

Tamiya German Infantry Mortar Team (1:35)

German Infantry Mortar Team Includes - Pack of Plastic Figures - Accessories included - Figures require glue and paint to complete NOT included - 1:35 Scale

Tamiya German Infantry Weapons (1:35)

German Infantry Weapons Includes - Luger P08 and Walther P38 Pistols - Kar98K and G41 Rifles - MP44 Selective Rifles - PzB 39 Anti-Tank Rifles - MG34 and MG42 Machine Guns - Magentic Mines - Panzerfaust - Accessories, Ammo and tripods - Plastic parts require glue and  paint to complete NOT included  - 1:35 Scale  

Tamiya British Challenger 1 Mk.3 (1:35)

British Challenger 1 Mk.3 British forces in the 1991 Persian Gulf War were able to rely on a significant asset in the Challenger 1, its awe-inspiring 120mm main gun accounting for numerous Iraqi T-72 tanks, and the crew protected ably by front and side composite and reactive armor. This kit can be assembled to recreate a Challenger 1 used by British forces, or also NATO troops. Nylon mesh is included to recreate the baskets encircling the turret. Two highly realistic figures are included; one depicts a bescarfed commander in desert conditions, while the other captures a commander in the distinctive NATO cold-climate uniform. - 1:35 Scale

Tamiya British Chieftain Mk. 5 Tank (1:35)

This is a 1/35 scale plastic model assembly kit depicting the 1970 Mk.5 variant of the Chieftain tank. ★ From the 120mm gun to the shape of the hull and turret, this heavyweight is recreated with aplomb. ★ Features depictions of the complex suspension, armor plates and more. ★ Hatches can be opeend, and side skirts attached or detached at will. ★ Comes with three torso figures. ★ 1:35 Scale

Tamiya British Churchill VII (1:35)

British Churchill VII - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya British Cromwell Mk.IV (1:35)

British Cromwell Mk.II - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya British Infantry on Patrol (1:35)

British Infantry on Patrol

Tamiya British SAS Jeep (1:35)

British SAS Jeep - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya British Universal Carrier Mk.II (1:35)

British Universal Carrier Mk.II - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya Challenger 2 (Desertised) (1:35)

Challenger 2 (Desertised) - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya WWI British Infantry Set x 5 figures (1:35)

 WWI British Infantry Set x 5 figs - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya WWI British Mk IV Tank Male with motor (1:35)

WWI British Mk IV Tank Male with motor Includes: - Mk IV Male Tank - Motor and gearbox to make operational - Kit requires glue and paint to complete (Not Included) - 1:35 Scale

Tamiya 88mm Gun Flak 36/37 (1:35)

German 88mm Gun Flak 36/37 Includes: - Flak Gun - 10x Figures - Ammunition Accessories - Kit requires glue and paint to complete (Not Included) - 1:35 Scale

Tamiya Allied Vehicles Accessory Set (1:35)

Allied Vehicles Accessory Set

Tamiya Armoured Car Sd.Kfz 222 Africa (1:35)

Armoured Car Sd.Kfz 222 Africa Includes: - Detailed plastic kit - Body detailing includes surface texture - Accurate square hull and weld lines - Interior detailing - Hatches can be modelled in open or closed positions - Choice of two tyre types - Underframe detailing and suspension  - Crew figures  - Radio Operator and motorcycle - Includes photo-etch parts - Waterslide transfers/decals - Kit requires glue and paint to complete NOT included - 1:35 Scale

Tamiya Austin Tilly Utility Car (1:35)

Austin Tilly Utility Car Includes: - Plastic kit - Engine bay features an engine and other components - Interior detail - Driver figure - Dashboard and seats feature realistic surface texture. - Separately molded front doors enhance realism. - Model can depict the tailgate and rear flap in open or closed positions. Suspension also features realistic details. - Length: 112mm - Width: 46mm. - Waterslide transfers/decals include four different schemes - Plastic kit requires glue and paint to complete NOT included - 1:35 Scale

Tamiya Barricades (1:35)

Barricades - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya Brick Walls (1:35)

Brick Walls - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya British 25 pounder & Quad Tractor (1:35)

Bri- 1:35 scale plastic kit - Requires glue & paints (not included)tish 25 pounder & Quad Tractor

Tamiya German Infantry Mid WWII (1:35)

German Infantry Mid WWII - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya Marder I (1:35)

Marder I - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya Pz.Kpfw.IV Ausf F (1:35)

Pz.Kpfw.IV Ausf F - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya T34/76 1943 Russian Tank (1:35)

T34/76 1943 Russian Tank - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya BSA M20 Motorcycle w/Military Police (1:35)

BSA M20 Motorcycle w Military Police - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya Archer British Self Propelled Anti Tank Gun (1:35)

Archer British Self Propelled Anti Tank Gun - 1:35 scale plastic kit - Requires glue & paints to complete (not included)