Tamiya Sd.Kfz.2 Kettenkraftrad Mid Production (1:35)

Sd.Kfz.2 Kettenkraftrad Mid Production A Trusty Servant The smallest of the WWII German half-track vehicles, the Kettenkraftrad was nonetheless a major presence and active in many duties. It featured a central engine and a motorcycle handlebar at the front, with superlative balance and the power and mobility to take on rough terrain. Over eight thousand were produced during WWII, and those manufactured between 1943 and 1944 had distinctive features such as a rounded taillight base, plus reinforcing plates on the armrests of the rear seat. About the Model ★This is a 1/35 scale plastic model assembl kit. Length: 139mm (with trailer), width: 29mm. ★The unmistakeable form of the Kettenkraftrad is depicted in style, right down to the complex suspension setup.  ★Features ergonomic recreations of engine and transmission, plus an opening engine hatch. ★Assembly type tracks utilize one-piece straight sections, with separate parts for the pads. ★Comes with a driver and two other figures. - 1:35 Scale

Tamiya M561 Gama Goat (1:35)

M561 Gama Goat  At Home Off of the Beaten Track Originally commissioned in 1966 as an off-road, amphibious vehicle, the M561 Gama Goat was a 6-wheel drive truck consisting of a 4-wheel tractor and a 2-wheel carrier module. What really set it apart from other vehicles of its type, however, was its employment of an articulation joint between the two modules that allowed them to move independently of one another: a most useful skill when traversing rough terrain. The 14,000 Gama Goats produced up to 1973 were used in a variety of roles by both the U.S. Army and Marine Corps, and were deployed in the fighting in Grenada in 1983, although by the start of the 1990s the Gama Goat had been largely phased out. The former half of its unusual nickname came from Roger Gamaunt, designer of the key articulation joint, and the latter half from its tenacious goat-like climbing ability. About the Model ★1/35 scale plastic model assembly kit of the M561 Gama Goat.  ★Length: 170mm, Width: 62mm.  ★The model accurately captures the unique and powerful 2-module form of the M561.  ★Articulation joint is recreated using a poly cap and provides authentic movement.  ★Includes optional front windscreen and winch parts.  ★Realistic depiction of the complex 6-wheel suspension is achieved with uncomplicated assembly.  ★Comes with 1 figure and 3 marking options. - 1:35 Scale

Tamiya British 2-Ton 4x2 Ambulance (1:48)

British 2-Ton 4x2 Ambulance  Includes: - Detailed plastic kit - Pre-coloured plastic parts - Clear parts for headlights and windscreen - Front grill and cab detail - Full underframe represented - Wheel and suspension detail - Driver figure included - Two sets of waterslide transfers/decals included - Kit requires glue and paint to complete NOT included - 1:48 Scale Vehicle information and history: Around 13,000 examples of this sturdy and reliable 2-ton 4x2 ambulance were produced during WWII; based upon a civilian truck, it was designed with the input of the Medical Corps and had bench seats that could be converted into two-level beds. It served in France, North Africa, Italy, and even across Western Europe after the Normandy invasion, and was often seen not just with Army units, but also at airfields and the like.

Tamiya U.S. Multiple Gun Motor Carriage M16 Half Track (1:35)

Multiple Gun Motor Carriage M16 Half Track Includes: - Detailed plastic kit - Realistic wheel, Track suspension and vehicle ladder underframe detailing - Quadruple 12.7mm Browning heavy machine guns - Positioning turret - Vehicle and Figure Accessories - Three Figures in realistic poses - Waterslide transfers/decals - Kit requires glue and paint to complete NOT included - 1:35 Scale  Vehicle information and history: The progress of the air force and the improved mobility made with the mechanization of the ground troops greatly changed the way battles were fought during World War II. With this in mind, many kinds of anti-aircraft weapons were developed to fight against enemy aircraft attacks, which led to fierce battles seen at every front. One such anti-aircraft machine seen during WWII was the M16 self propelled gun which was manufactured from 1942 to 1943. Fitted on the M3 half-track chassis was the quad mounted 50-caliber (12.7mm) Browning automatic heavy machine gun, which had an 893m/s muzzle velocity, 6,767m range, and a discharging rate of 450-555 rounds per minute, which earned it the nickname of "the meat chopper." The Type M45 gun mount could rotate 360 degrees and elevate between -10 and +90 degrees and was electrically driven which allowed it to move 60 degrees of rotation/elevation per second. Not only was it greatly effective against enemy aircraft, it was also very influential on the ground attack. Even after WWII, the M16 was also deployed with the Japanese Ground Self Defense Forces during the Korean War.

Tamiya Panzerkampfwagen III Ausf N (1:35)

Panzerkampfwagen III Ausf N (1:35) During the middles stages of WWII, most German military vehicles had trouble providing adequate support to troops, therefore the N type tank was built to help solve this problem. The N type tank replaced its Marder III main battery with a 7.5cm gun which could fire high-performance high-explosive bursting projectile shells. From June 1942 through to August 1943, existing J, L, & M models also received these upgrades and 663 tanks were fitted, and another 37 were also upgraded later in 1944. In the summer of 1942 these tanks appeared on the battlefield with their highly explosive shells, and they proved to be highly efficient in their role of reinforcing the ground troops. They were deployed into newly organized heavy tank battalions, to make up for the lack of Tiger I tanks. As a support tank, the N type was easy to manage and very reliable, and in the latter half of WWII it fought at many fronts.   Includes: - Detailed plastic kit - Accurate short Barrel 7.5cm gun reproduced from aluminium - Grill etchings - Loading area detail - Smoke discharger on left and right of turret - 2x Commander figures  - 4x Sets of waterslide transfers (including Russian and African fronts) - Track and wheel detail - Kit requires glue and paint to complete NOT included) - 1:35 Scale

Tamiya Kubelwagen Type82 (Africa) (1:35)

Kubelwagen Type 82 (Africa) During WWII, the German Kübelwagen was greatly used at many fronts including North Africa. It was of a simple construction and came powered by a tough air-cooled engine and was greatly trusted by the German soldiers. The Kübelwagen type 82 which was seen at North Africa, featuring balloon type tires which allowed it to perform even on the desert sands, is now realized as a plastic assembly model kit. Includes: - Detailed plastic kit - Fully Cab interior detail - Extensive body detailing - Standing soldier figure wearing shorts and a short sleeved shirt - Accurate Balloon tyres - Jerry cans, shovels and accessories - Waterslide transfers/decals - Kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya M4A3 Sherman w 105mm Howitzer (1:35)

M4A3 Sherman w 105mm Howitzer  Excelling in both reliability and sheer production capability, the M4 Sherman series of tanks became the staple fighting-vehicles of the WWII Allies. The first version to be produced, the cast-hull M4A1, was succeeded by the welded-hull M4, the diesel engine M4A2, and finally the most widely-known tank of the series, the M4A3. Three types of main armament were used on the M4A3: on the initial production types, the 75mm main gun and on the subsequent types, the 76mm main gun for heightened penetration. Finally, to provide heavy fire support for assaults on enemy outposts, the powerful 105mm howitzer was later adopted. The 105mm howitzer was carried in a M52 combination mount and a vision cupola was fitted for the commander with a small hatch for the loader. It could fire M1 shells at angles from -10 to +35 degrees at a maximum range of 11,500m. About 500 of the M4A3 (105mm) were produced at the Chrysler factory in Detroit from May to September 1944. From September 1944 horizontal volute spring suspension was introduced on the M4A3 (105mm) together with the wider center-guide T66 tracks. The M4A3 (105mm) were deployed to European Theatre from July 1944, and played an indispensable role in the destruction of enemy positions by the U.S. infantry fighting on the front lines. Includes - Extensively detailed plastic kit - Smooth form of the cast turret with 105mm howitzer and welded hull of this late production M4A3 tank overflow with realism. - Commander's cupolas, loader's hatch and other hull and turret hatches can be modeled in the open or closed position. - 2x kinds of road wheels and sprockets can be selected - Rubber padded tracks - 3x infantrymen and one tank commander in realistic poses - Included equipment includes ammunition boxes, tripod, ration boxes, and much more. - 3x sets of waterslide transfers/decals - Kit requires glue and paint to complete (NOT included). - 1:35 Scale

Tamiya A34 Comet British Cruiser Tank (1:35)

A34 Comet British Cruiser Tank This ALL-NEW model kit recreates the British Cruiser Tank A34 Comet in 1/35 scale! At the end of WWII, the British Army developed the Comet – which became a base of later British Army tanks such as the Centurion - as a counter for the powerful German Tiger and Panther tanks. With the hull design based upon the structure of the existing armoured cruiser tank Cromwell, the Comet employed a larger turret with a powerful 17-pounder gun. The Comet first saw action in Operation Varsity in March 1945, and around 900 including ones produced after WWII were built. Features: 1/35 scale plastic model assembly kit. Length: 219mm, width: 88mm. The vertical-plane hull features box style assembly – accurately assembled with two bulkheads like the actual tank Features realistic renderings of front hull and turret cast surfaces, and gun shield canvas cover surface. Clear parts are included to render searchlight on turret left side. Assembly type tracks have one-piece straight sections. Choose from one-piece or two-piece (right and left) split type of the engine exhaust cover “Normandy Cowling’’. Includes two torso figures to depict crew with winter clothes. Comes with a choice of two marking options to recreate 11th Armoured Division tanks which saw action during WWII.   - 1:35 Scale

Tamiya British Chieftain Mk. 5 Tank (1:35)

This is a 1/35 scale plastic model assembly kit depicting the 1970 Mk.5 variant of the Chieftain tank. ★ From the 120mm gun to the shape of the hull and turret, this heavyweight is recreated with aplomb. ★ Features depictions of the complex suspension, armor plates and more. ★ Hatches can be opeend, and side skirts attached or detached at will. ★ Comes with three torso figures. ★ 1:35 Scale