Tamiya German 3 Ton 4x2 Cargo Truck (1:35)

German 3 Ton 4x2 Cargo Truck From 1937 to 1944, over 78,000 medium 3ton 4x2 Cargo Trucks were produced and they became the most recognized German army truck in WWII. It featured a durable rear wheel-drive chassis with superior off-road handling and a large cargo area, which enabled superb load-carrying capacity. They were used until the end of war to transport troops and supplies on all fronts. Features: ★This is a 1/35 plastic assembly model of German 3ton 4x2 Cargo Truck.  ★Length:174mm Sturdy body and unique cabin are all realistically reproduced.  ★Accurately recreated forward-bent chassis, and suspension features fewer parts for easy assembly.  ★Movable front wheels for perfect diorama situations.  ★The rear cargo area has a realistic wood pattern for greater realism.  ★Masking stickers for windows are included in kit.  ★1 driver and 1 navigator figure and four different markings included.  ★Comes with sets of fuel drums and jerry cans.

Tamiya M561 Gama Goat (1:35)

M561 Gama Goat  At Home Off of the Beaten Track Originally commissioned in 1966 as an off-road, amphibious vehicle, the M561 Gama Goat was a 6-wheel drive truck consisting of a 4-wheel tractor and a 2-wheel carrier module. What really set it apart from other vehicles of its type, however, was its employment of an articulation joint between the two modules that allowed them to move independently of one another: a most useful skill when traversing rough terrain. The 14,000 Gama Goats produced up to 1973 were used in a variety of roles by both the U.S. Army and Marine Corps, and were deployed in the fighting in Grenada in 1983, although by the start of the 1990s the Gama Goat had been largely phased out. The former half of its unusual nickname came from Roger Gamaunt, designer of the key articulation joint, and the latter half from its tenacious goat-like climbing ability. About the Model ★1/35 scale plastic model assembly kit of the M561 Gama Goat.  ★Length: 170mm, Width: 62mm.  ★The model accurately captures the unique and powerful 2-module form of the M561.  ★Articulation joint is recreated using a poly cap and provides authentic movement.  ★Includes optional front windscreen and winch parts.  ★Realistic depiction of the complex 6-wheel suspension is achieved with uncomplicated assembly.  ★Comes with 1 figure and 3 marking options. - 1:35 Scale

Tamiya KS600 Motorcycle & Sidecar (1:35)

KS600 Motorcycle & Sidecar  Includes: - Plastic kit - Detailed bike with distinctive form with pressed steel frame - Road signs are printed on the packaging side and can be cut out to display with your model. - Detailed figures Include an NCO figure for the side car, a rider and a standing soldier - Length: 71 mm - Width: 47mm - Kit requires glue and paint to complete NOT included - 1:35 Scale

Tamiya U.S. Multiple Gun Motor Carriage M16 Half Track (1:35)

Multiple Gun Motor Carriage M16 Half Track Includes: - Detailed plastic kit - Realistic wheel, Track suspension and vehicle ladder underframe detailing - Quadruple 12.7mm Browning heavy machine guns - Positioning turret - Vehicle and Figure Accessories - Three Figures in realistic poses - Waterslide transfers/decals - Kit requires glue and paint to complete NOT included - 1:35 Scale  Vehicle information and history: The progress of the air force and the improved mobility made with the mechanization of the ground troops greatly changed the way battles were fought during World War II. With this in mind, many kinds of anti-aircraft weapons were developed to fight against enemy aircraft attacks, which led to fierce battles seen at every front. One such anti-aircraft machine seen during WWII was the M16 self propelled gun which was manufactured from 1942 to 1943. Fitted on the M3 half-track chassis was the quad mounted 50-caliber (12.7mm) Browning automatic heavy machine gun, which had an 893m/s muzzle velocity, 6,767m range, and a discharging rate of 450-555 rounds per minute, which earned it the nickname of "the meat chopper." The Type M45 gun mount could rotate 360 degrees and elevate between -10 and +90 degrees and was electrically driven which allowed it to move 60 degrees of rotation/elevation per second. Not only was it greatly effective against enemy aircraft, it was also very influential on the ground attack. Even after WWII, the M16 was also deployed with the Japanese Ground Self Defense Forces during the Korean War.

Tamiya M3A2 Half Track U.S. Armoured Personnel Carrier (1:35)

M3A2 Half Track U.S. Armoured Personnel Carrier Includes: - Detailed plastic kit - Body and exterior detaining includes loaded accessories - Interior detailing - Armament - Mounted Gun - Nine figures in various poses  - Track, wheel and suspsension detailing - Waterslide transfers/decals - Kit requires glue and paint to complete NOT included - 1:35 Scale

Tamiya U.S. 2.5-TON 6x6 Cargo Truck (1:35)

U.S. 2.5-TON 6x6 Cargo Truck During WWII, over 800,000 2 1/2-ton 6x6 cargo trucks were produced and became a symbol of the American victory along with the Sherman tank and the Jeep. Among them was a troop carrier of which approximately 57,000 units were made. This is a plastic assembly model kit of one such truck. The highly durable and tough form has been precisely reproduced. Features such as the robust suspension and the split type differential have a rich detailed finish.  Includes: - Detailed plastic kit - Extensive body detailing  - Tyre and underframe detailing - Cab interior and back trailer - Jerry Cans, shovel detail, various accessories - Seated driver figure  - 5x sets of Waterslide transfers/decals - kit requires glue and paint to complete (NOT included) - 1:35 Scale

Tamiya M4A3 Sherman w 105mm Howitzer (1:35)

M4A3 Sherman w 105mm Howitzer  Excelling in both reliability and sheer production capability, the M4 Sherman series of tanks became the staple fighting-vehicles of the WWII Allies. The first version to be produced, the cast-hull M4A1, was succeeded by the welded-hull M4, the diesel engine M4A2, and finally the most widely-known tank of the series, the M4A3. Three types of main armament were used on the M4A3: on the initial production types, the 75mm main gun and on the subsequent types, the 76mm main gun for heightened penetration. Finally, to provide heavy fire support for assaults on enemy outposts, the powerful 105mm howitzer was later adopted. The 105mm howitzer was carried in a M52 combination mount and a vision cupola was fitted for the commander with a small hatch for the loader. It could fire M1 shells at angles from -10 to +35 degrees at a maximum range of 11,500m. About 500 of the M4A3 (105mm) were produced at the Chrysler factory in Detroit from May to September 1944. From September 1944 horizontal volute spring suspension was introduced on the M4A3 (105mm) together with the wider center-guide T66 tracks. The M4A3 (105mm) were deployed to European Theatre from July 1944, and played an indispensable role in the destruction of enemy positions by the U.S. infantry fighting on the front lines. Includes - Extensively detailed plastic kit - Smooth form of the cast turret with 105mm howitzer and welded hull of this late production M4A3 tank overflow with realism. - Commander's cupolas, loader's hatch and other hull and turret hatches can be modeled in the open or closed position. - 2x kinds of road wheels and sprockets can be selected - Rubber padded tracks - 3x infantrymen and one tank commander in realistic poses - Included equipment includes ammunition boxes, tripod, ration boxes, and much more. - 3x sets of waterslide transfers/decals - Kit requires glue and paint to complete (NOT included). - 1:35 Scale

Tamiya British Small Staff Car 10HP (1:48)

British Small Staff Car 10HP Includes: - Staff Car - 1x driver figure - Kit requires glue and paint to complete (Not Included) - 1:48 Scale  

Tamiya British Challenger 1 Mk.3 (1:35)

British Challenger 1 Mk.3 British forces in the 1991 Persian Gulf War were able to rely on a significant asset in the Challenger 1, its awe-inspiring 120mm main gun accounting for numerous Iraqi T-72 tanks, and the crew protected ably by front and side composite and reactive armor. This kit can be assembled to recreate a Challenger 1 used by British forces, or also NATO troops. Nylon mesh is included to recreate the baskets encircling the turret. Two highly realistic figures are included; one depicts a bescarfed commander in desert conditions, while the other captures a commander in the distinctive NATO cold-climate uniform. - 1:35 Scale

Tamiya British Universal Carrier Mk.II (1:35)

British Universal Carrier Mk.II - 1:35 scale plastic kit - Requires glue & paints (not included)

Tamiya Armoured Car Sd.Kfz 222 Africa (1:35)

Armoured Car Sd.Kfz 222 Africa Includes: - Detailed plastic kit - Body detailing includes surface texture - Accurate square hull and weld lines - Interior detailing - Hatches can be modelled in open or closed positions - Choice of two tyre types - Underframe detailing and suspension  - Crew figures  - Radio Operator and motorcycle - Includes photo-etch parts - Waterslide transfers/decals - Kit requires glue and paint to complete NOT included - 1:35 Scale