Hornby Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke)

Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke) This highly detailed model represents famed 'Spam Can' No.35028 ‘Clan Line’ in British Railways lined green livery with early cycling lion emblem on the tender. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis, pony truck and trailing truck Die-cast connecting rods and valve gear High detail cab and fully decorated backhead with decorated instrument dials Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels 8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible DCC Sound: Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of Merchant Navy locomotives Tender speaker Livery: BR Lined Green with ‘Cycling Lion’ early emblem on tender Clan Line etched nameplates Semi-gloss finish Accurate colours and fonts - OO Scale

Hornby LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke)

LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60002 ‘Sir Murrough Wilson’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights. This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any early British Railways model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Non-Corridor Tender Side valence removed Livery: BR Lined Green Named ‘Sir Murrough Wilson’ Cycling Lion on tender Accurate colours and fonts - OO Scale

Hornby LNER A4 60024 'Kingfisher' BR Exp. Ultramarine (Sound/Smoke)

LNER A4 60024 'Kingfisher' BR Experimental Ultramarine (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60024 ‘Kingfisher’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights.  This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any LNER model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Corridor Tender Side valence removed Livery: BR Express Blue Named ‘Kingfisher’ British Railways lettering on tender Accurate colours and fonts - OO Scale

Hornby GNR J13 1252 GNR Plain Grey (Sound Fitted)

GNR J13 1252 GNR Plain Grey (Sound Fitted) The Hornby GNR J13/J52 returns for 2026 in the standout GNR grey livery of the early 1900s, numbered 1252. Model Specification: Highly detailed OO gauge model based on extensive research and original works drawings Die-cast boiler, chassis and running plate. Model weight is 235 grams Highly detailed cab and fully decorated backhead with decorated instrument dials Pogo pin wheel pick-up arrangement for easy pick-up servicing Die-cast connecting rods Prototypical size metal handrails with brass stanchions Oilite main drive bearings Opening cab roof vent Sprung metal buffers Front and rear NEM coupling pocket. Rear coupling pocket has a close coupling mechanism Wheel pick-ups on all wheels Accessory bag contains vacuum pipes, lamps and couplings Separately fitted lamps (lamp code can be changed) Separately fitted simulated coal load. DCC Sound: HM7000 21-pin sound decoder fitted High fidelity sound profile of J13/J52 Electronics: Decoder-controlled firebox flicker HM7000 Power Bank compatible Powerful 5-pole skew-wound motor Tooling: Raised Safari cab roof ventilator Double footstep arrangement Coal bunker with coal rails Flush-faced connecting rods Brass Ramsbottom safety valves 3’ 3” built-up chimney GNR tapered buffer stocks Livery: GNR Plain Grey Semi-gloss with matt smokebox Accurate colours and typefaces - OO Scale

Hornby GNR J13 1252 GNR Plain Grey

GNR J13 1252 GNR Plain Grey The Hornby GNR J13/J52 returns for 2026 in the standout GNR grey livery of the early 1900s, numbered 1252. Model Specification: Highly detailed OO gauge model based on extensive research and original works drawings Die-cast boiler, chassis and running plate. Model weight is 235 grams Highly detailed cab and fully decorated backhead with decorated instrument dials Pogo pin wheel pick-up arrangement for easy pick-up servicing Die-cast connecting rods Prototypical size metal handrails with brass stanchions Oilite main drive bearings Opening cab roof vent Sprung metal buffers Front and rear NEM coupling pocket. Rear coupling pocket has a close coupling mechanism Wheel pick-ups on all wheels Accessory bag contains vacuum pipes, lamps and couplings Separately fitted lamps (lamp code can be changed) Separately fitted simulated coal load. Electronics: Decoder-controlled firebox flicker (decoder sold separately) HM7000 21-pin sound decoder compatible HM7000 Power Bank compatible Powerful 5-pole skew-wound motor Tooling: Raised Safari cab roof ventilator Double footstep arrangement Coal bunker with coal rails Flush-faced connecting rods Brass Ramsbottom safety valves 3’ 3” built-up chimney GNR tapered buffer stocks Livery: GNR Plain Grey Semi-gloss with matt smokebox Accurate colours and typefaces - OO Scale

Hornby Playtrains: Harry Potter Hogwarts Express Train Set (w/ Steam)

Playtrains: Harry Potter Hogwarts Express Train Set (with Sound & Steam) Bring the Magic of the Harry Potter Hogwarts Express Home! Delight your little ones with the Hogwarts Express, a toy train set designed to spark imagination and creativity for children aged 5–8.  Perfect for boys and girls, this beautifully crafted set captures the magic of the world-famous Hogwarts Express train from the Harry Potter films. With real steam, working lights, and authentic sound effects, playtime becomes a fully immersive Wizarding World adventure—safe, fun, and endlessly engaging. The set includes everything needed for magical journeys: the Hogwarts Castle Steam Locomotive, two coaches with magnetic couplings, an easy clip figure-of-8 track with a siding, Kings Cross Platform 9 ¾ Station, Hogsmeade Station buildings, and a hand controller for easy, intuitive operation.  Every detail is designed for hands-on fun and imaginative storytelling, making it the ultimate gift for young Harry Potter fans. This set has everything your children need for hours of fun and the Playtrains toy system offers a host of extra trains, track and buildings that can be added to this set to create a bigger toy train set.  All Playtrains products are compatible. Play, build, and explore with the Playtrains Harry Potter Hogwarts Express train set.

Hornby Playtrains: Metal Works Open and Tipper Wagon Pack

Playtrains: Metal Works Open and Tipper Wagon Pack Add even more hands-on adventure to their Playtrains railway world with this exciting Freight Wagon Pack.  Perfect for children aged 5–8, this pack includes one closed goods wagon and one open tipper wagon — ready to carry everything anything from “important deliveries” to imaginative cargo dreamed up on the living room floor.  Finished in fun yet realistic colour schemes, these wagons bring an authentic freight feel while still capturing a child’s sense of play. They’re the ideal addition to the Steam Goods Train Set (R9361), Blue Ranger Steam Engine (R9378SS) or Steam Tank Engine Express (R9364).  Whether it’s transporting supplies to a town, tipping out loads at a pretend quarry, or making special deliveries, the storytelling possibilities grow with every trip around the track. Simple magnetic couplings make attaching and detaching the wagons quick and frustration-free for little hands, helping children build confidence as they create their own railway world.  More wagons mean more adventures — and even more reasons to keep their railway moving.

Hornby Playtrains: Crimson & Cream Steam Train Coach Pack

Playtrains: Crimson & Cream Steam Train Coach Pack Expand your child's railway adventures with this delightful Playtrains Steam Train Coach Pack.  Featuring two beautifully finished passenger coaches in a classic red and cream colour scheme, these coaches are the perfect way to make your child’s train feel like a real express.  Designed for children aged 5–8, the coaches are robust, easy to handle and built for enthusiastic play. An ideal addition to the Blue Ranger Steam Engine (R9378SS) or the Steam Tank Engine Express (R9364), these extra carriages instantly create longer trains and bigger journeys — encouraging imaginative storytelling and extended play.  Simple magnetic couplings make attaching and detaching the coaches quick and frustration-free for little hands, helping children build confidence as they create their own railway world. Add more passengers, more adventures and even more excitement to every journey.

Hornby Playtrains: Harry Potter Hogwarts Express Coach Pack

Playtrains: Harry Potter Hogwarts Express Coach Pack Add even more magic to their railway adventure with the Hogwarts Express Pack of 2 Coaches. Designed as the perfect addition to the Harry Potter Back to Hogwarts Train Set, these extra carriages let young witches and wizards expand their train and bring even more of the wizarding world to life.  Easy to attach with simple magnetic couplings, the coaches click neatly into place, making them ideal for children aged 5–8 to connect and play independently. Whether they’re setting off from Platform 9¾ or imagining the journey to Hogwarts, a longer train means even bigger stories and more creative play.  Built to last and officially licensed, these Hogwarts Express coaches are a wonderful way to grow their set, encourage imaginative storytelling, and make every trip to Hogwarts feel that little bit more magical.

Accurascale Class 50 50035 'Ark Royal' BR Blue (SF)

Class 50 50035 'Ark Royal' BR Blue (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof

Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof (SF)

Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50029 'Renown' Revised NSE w/WofE Branding

Class 50 50029 'Renown' Revised NSE w/WofE Branding Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50029 'Renown' Revised NSE w/WofE Branding (SF)

Class 50 50029 'Renown' Revised NSE w/WofE Branding (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50035 'Ark Royal' BR Blue

Class 50 50035 'Ark Royal' BR Blue Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50019 'Ramillies' BR Laira Departmental Blue

Class 50 50019 'Ramillies' BR Laira Departmental Blue Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50019 'Ramillies' BR Laira Departmental Blue (SF)

Class 50 50019 'Ramillies' BR Laira Departmental Blue (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Bachmann PCA Wagon BCC11026 'Blue Circle Cement' Grey [W]

PCA Metalair Bulk Powder Wagon 'Blue Circle Cement' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Blue Circle Cement’ Grey livery Running No. BCC11026 Accessory Pack NEM Coupling Pockets Length 115mm (over couplings)

Bachmann PCA Wagon BCC11089 'Freightliner Heavy Haul' Grey [W]

PCA Wagon BCC11089 'Freightliner Heavy Haul' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Freightliner Heavy Haul’ Grey livery Running No. BCC11089 Accessory Pack NEM Coupling Pockets Length 115mm (over couplings)

Bachmann LNER 12T Ventilated Fruit Van BR Bauxite (Early)

LNER 12T Ventilated Fruit Van BR Bauxite (Early) Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, some of which were intended for specific traffic like this Fruit Van built by the London and North Eastern Railway (LNER). The fruit vans sported louvres at each end and ventilators on the roof to allow fresh air to circulate within, keeping fruit fresh during its journey. This Branchline models depicts one of those wooden bodied vans and the planked body is replicated with fine engraving, with precision moulding to capture every detail of the sliding doors and their mechanism, topped off with a separately fitted metal door handle. On the roof, the six ventilators are each moulded in full relief before being added individually, the central pair being offset as per the prototype. The chassis employs metal wheelsets of the 3-hole disc variety around which safety loops are added from formed metal wire, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Pristine BR Bauxite (Early) livery Running No. E222078 NEM Coupling Pockets Length 90mm (over couplings)

Bachmann LNER 12T Ventilated Fruit Van BR Bauxite (Late)

LNER 12T Ventilated Fruit Van BR Bauxite (Late) Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, some of which were intended for specific traffic like this Fruit Van built by the London and North Eastern Railway (LNER). The fruit vans sported louvres at each end and ventilators on the roof to allow fresh air to circulate within, keeping fruit fresh during its journey. This Branchline models depicts one of those wooden bodied vans and the planked body is replicated with fine engraving, with precision moulding to capture every detail of the sliding doors and their mechanism, topped off with a separately fitted metal door handle. On the roof, the six ventilators are each moulded in full relief before being added individually, the central pair being offset as per the prototype. The chassis employs metal wheelsets of the 3-hole disc variety around which safety loops are added from formed metal wire, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. MODEL FEATURES: Bachmann Branchline OO Scale Era 5 Pristine BR Bauxite (Late) livery Running No. E222476 Lettered ‘VANFIT’ NEM Coupling Pockets Length 90mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Bauxite (TOPS)

BR 12T Ventilated Van Plywood Sides BR Bauxite (TOPS) British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 7 Pristine BR Bauxite (TOPS) livery Running No. B769573 TOPS Code VVV NEM Coupling Pockets Length 88mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Dept. Olive w/Chevrons

BR 12T Ventilated Van Plywood Sides BR Dept. Olive w/Chevrons British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 7 Pristine BR Departmental Olive Green with Chevrons livery Running No. ADB786510 TOPS Code ZRV NEM Coupling Pockets Length 88mm (over couplings)

Bachmann BR 12T Ventilated Van Plywood Sides BR Bauxite (Early)

BR 12T Ventilated Van Plywood Sides BR Bauxite (Early) British Railways (BR) inherited a wide range of rolling stock upon Nationalisation in 1948, much of which was aging or in need of modern replacement and so a programme to build new vehicles soon commenced. These new vehicles were built to a variety of standardised designs and the 12 Ton Ventilated Van, which was used to transport general merchandise, was one of the most numerous types of freight vehicle built by BR. Employing a metal chassis, the van was constructed from corrugated metal ends with a ventilator in each, with a metal body frame which was panelled with wooden planks or plywood sheets. The Bachmann Branchline model is a faithful replica of the humble 12T Van, using a precision moulded body that accurately captures the corrugated ends and smooth plywood sides, along with finer details like the body framing, door hinges and locking mechanisms. The roof includes the characteristic rain strips above each set of double doors and the rivets securing the roof are neatly moulded at either end. The chassis is similarly detailed, being fitted with separate brake gear, brake handles and vacuum cylinders, complete with the linkage between the two ‘V’ hangers. Metal wheels and axles are employed, along with turned metal buffers; meanwhile the couplings are fitted via NEM coupling pockets allowing full interchangeability for those wishing to use an alternative coupling system. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Pristine BR Bauxite (Early) livery Running No. B775484 NEM Coupling Pockets Length 88mm (over couplings)

Bachmann LMS Ivatt 2MT 46464 BR Lined Black (Early) (Preserved)

LMS Ivatt 2MT 46464 BR Lined Black (Early) (Preserved)  Ivatt’s 2MT ‘Mogul’ 2-6-0 Tender Locomotives were popular, go-anywhere engines which served the LMS and BR for two decades and across a wide area, making this Bachmann Branchline model a great choice for many modellers wishing to depict the steam age or preservation, as the type remains strongly represented today. The Branchline model of Ivatt’s 2-6-0 mogul employs a diecast running plate and locomotive chassis to provide an impressive weight, ensuring that the model’s performance matches that of the prototype. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails and lamp irons to the safety valves, whistle and sprung buffers, each of which are turned brass. Further details are added individually like the lubricators and sand boxes adorning the running plate and the brake blocks, brake rigging and metal wire sandpipes mounted to the chassis. Within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. Moving to the tender and two lengths of locomotive to tender drawbar are provided to suit different layout conditions whilst the tender itself is finely moulded, with several separately applied details including the lamp irons, handrails, handwheels and sprung metal buffers. A realistic coal load is included, with the empty coal space modelled below, whilst the tender chassis includes brake rigging and the water scoop. The livery application is executed to the highest standard with the rich, uniform paintwork enhanced by the three-colour lining, emulating the BR lined black livery to full effect. Numbering, lettering and the BR Early Emblem is reproduced in high definition, resulting in a model fit for any collection. MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Locomotive is Preserved Pristine BR Lined Black (Early Emblem) livery Running No. 46464 Long Tender Ladder and Fabricated Cab Footsteps Two lengths of Tender Drawbar Supplied Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 8 Pin DCC Decoder Socket – Recommend Decoder item No. 36-566A Length 226mm (over couplings) IVATT 2MT HISTORY Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network. With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today.

Bachmann LMS Ivatt 2MT 46521 BR Lined Green (Early) (Preserved)

LMS Ivatt 2MT 46521 BR Lined Green (Early) (Preserved) Ivatt’s 2MT ‘Mogul’ 2-6-0 Tender Locomotives were popular, go-anywhere engines which served the LMS and BR for two decades and across a wide area, making this Bachmann Branchline model a great choice for many modellers wishing to depict the steam age or preservation, as the type remains strongly represented today. The Branchline model of Ivatt’s 2-6-0 mogul employs a diecast running plate and locomotive chassis to provide an impressive weight, ensuring that the model’s performance matches that of the prototype. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails and lamp irons to the safety valves, whistle and sprung buffers, each of which are turned brass. Further details are added individually like the lubricators and sand boxes adorning the running plate and the brake blocks, brake rigging and metal wire sandpipes mounted to the chassis. Within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. Moving to the tender and two lengths of locomotive to tender drawbar are provided to suit different layout conditions whilst the tender itself is finely moulded, with several separately applied details including the lamp irons, handrails, handwheels and sprung metal buffers. A realistic coal load is included, with the empty coal space modelled below, whilst the tender chassis includes brake rigging and the water scoop. The livery application is executed to the highest standard with the rich, uniform paintwork enhanced by the black and orange lining, emulating the BR lined green livery to full effect. Numbering, lettering and the BR Early Emblem is reproduced in high definition, resulting in a model fit for any collection.   MODEL FEATURES: Bachmann Branchline OO Scale Era 4 Locomotive is Preserved Pristine BR Lined Green (Early Emblem) livery Running No. 46521 Short Tender Ladder and Oval Cab Footsteps Two lengths of Tender Drawbar Supplied Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 8 Pin DCC Decoder Socket – Recommend Decoder item No. 36-566A Length 226mm (over couplings) IVATT 2MT HISTORY Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network. With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today.

Bachmann LMS Ivatt 2MT 46447 BR Lined Black (Late) (Preserved)

LMS Ivatt 2MT 46447 BR Lined Black (Late) (Preserved) LMS Ivatt 2MT 46447 BIvatt’s 2MT ‘Mogul’ 2-6-0 Tender Locomotives were popular, go-anywhere engines which served the LMS and BR for two decades and across a wide area, making this Bachmann Branchline model a great choice for many modellers wishing to depict the steam age or preservation, as the type remains strongly represented today. The Branchline model of Ivatt’s 2-6-0 mogul employs a diecast running plate and locomotive chassis to provide an impressive weight, ensuring that the model’s performance matches that of the prototype. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails and lamp irons to the safety valves, whistle and sprung buffers, each of which are turned brass. Further details are added individually like the lubricators and sand boxes adorning the running plate and the brake blocks, brake rigging and metal wire sandpipes mounted to the chassis. Within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. Moving to the tender and two lengths of locomotive to tender drawbar are provided to suit different layout conditions whilst the tender itself is finely moulded, with several separately applied details including the lamp irons, handrails, handwheels and sprung metal buffers. A realistic coal load is included, with the empty coal space modelled below, whilst the tender chassis includes brake rigging and the water scoop. The livery application is executed to the highest standard with the rich, uniform paintwork enhanced by the three-colour lining, emulating the BR lined black livery to full effect. Numbering, lettering and the BR Late Crest is reproduced in high definition, resulting in a model fit for any collection.   MODEL FEATURES: Bachmann Branchline OO Scale Era 5 Locomotive is Preserved Pristine BR Lined Black (Late Crest) livery Running No. 46447 Long Tender Ladder and Oval Cab Footsteps Two lengths of Tender Drawbar Supplied Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 8 Pin DCC Decoder Socket – Recommend Decoder item No. 36-566A Length 226mm (over couplings)     IVATT 2MT HISTORY   Designed by H. G. Ivatt for the London, Midland & Scottish Railway (LMS), 128 of these Class 2 Moguls were built for light freight and passenger duties. With construction commencing in 1946, just twenty examples were built by the LMS and the remaining 108 were outshopped by British Railways following Nationalisation in 1948. The construction programme was completed in 1952 and these Mixed Traffic locomotives would go on to operate on all the BR regions, with the exception of the Southern. Light axle loadings allowed the Ivatt 2MTs to be used on most routes including branch lines, where their almost enclosed cabs made them ideal for working tender first when no turning facilities existed. The design provided the basis for the BR Standard Class 2MT 2-6-0, and the two are very similar in appearance, with the Standard version having only a modified cab and tender profile to allow unrestricted route availability across the British network.   With BR progressively closing more and more branch lines, and rationalising others – often employing new diesel multiple units to provide a more economical passenger service – duties for small locomotives like the Ivatt 2MTs began to disappear and the decline of the class began in 1961 when the first example was withdrawn. The Mogul’s versatility and its relatively modern design however ensured that many examples were still in traffic until the mid-1960s, but by 1967 all had been withdrawn. Thankfully, seven Ivatt 2MT have been preserved and the type is an ideal source of motive power for many of the trains running on heritage railways today. BR Lined Black (Late) (Preserved)

Bachmann MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black

MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine LMS Black livery Running No. 3850 Johnson-Deeley Tender Tall Chimney with Capuchon Ramsbottom Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Hornby SR Merchant Navy 21C4 'Cunard White Star' (TXS Steam Generator)

SR Merchant Navy 21C4 'Cunard White Star' (TXS Steam Generator) The popular Bulleid Pacific Merchant Navy is back in OO gauge with a brand new livery and steam generator technology. This highly detailed model represents the air-smoothed 'Spam Can', also known as 21C4 'Cunard White Star' in Southern Railways' malachite green. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Details: Highly detailed cab with fully decorated backhead and decorated instrument dials  Opening cab roof vent  Removable simulated coal load with fully detailed tender bunker  Accurately modelled Merchant Navy Bullied-Firth-Brown wheels  Modified 21C4 'widows peak' front end streamlining and chimney arrangement  5000 gallon tender with rear access ladders.  Cast trailing truck  Separately fitted nameplate, number plate, and company ownership plate  Circular smokebox door company plate  Sprung metal buffers  Heavy die-cast chassis, pony truck, and trailing truck  Features: Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element).  Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers and HM7000 app control.  Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect.  Adjustable steam output settings via the decoder  Water reservoir for up to 20 minutes of continuous steam running  Die-cast connecting rods and valve gear  Powerful 5-pole skew-wound motor  Flywheel with cardan shaft arrangement for smooth running  Oilite main drive bearings Wheel pickups on tender and driven locomotive wheelsets  Pogo pin wheel pickup arrangement for easy pickup servicing  8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling.  Front and rear NEM coupling pockets, with narrow tension lock couplings  Optional fit rear flanged wheelset (only recommended for larger layouts with sweeping curves or display purposes).  - OO Scale 

Bachmann SSA Scrap Wagon EWS 470078 [W]

SSA Scrap Wagon EWS 470078 [W] The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Weathered EWS livery Running No. 470078 Features: Length 126mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van BR Bauxite (Early) S49107

SR 12T Even Planked Ventilated Van BR Bauxite (Early) S49107 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine BR Bauxite (Early) livery Running No. S49107 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van Express Dairy Company N48359

SR 12T Even Planked Ventilated Van Express Dairy Company N48359 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine Express Dairy Company Blue livery Running No. N48359 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van SR Brown 48472

SR 12T Even Planked Ventilated Van SR Brown 48472 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine SR Brown livery Running No. 48472 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5010

POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5010 The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Pristine Standard Railfreight Blue & Yellow livery Running No. RLS5010 Features: Length 126mm (over couplings) - OO Scale

Bachmann POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5952 [W]

POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5952 [W] The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Weathered Standard Railfreight Blue & Yellow livery Running No. RLS5952 Features: Length 126mm (over couplings) - OO Scale

Bachmann POA Mineral Wagon 'ARC/Tiger' Yellow TRL5313

POA Mineral Wagon 'ARC/Tiger' Yellow TRL5313 The POA Mineral Wagons were created in the late-1980s by building new bodies onto the chassis of redundant tank wagons in order to move aggregates. Owned by Tiger Rail, the wagons were leased to ARC and Foster Yeoman but within a few years, larger bogie wagons were being introduced and the POAs were gradually displaced onto a variety of traffic including scrap metal and coal. Later the wagons were purchased by British Rail and most ended up in engineering use. The Bachmann Branchline model employs a precision bodyshell with panel lines and ribs moulded both inside and out. Individual ladders are fitted to the body and chassis on each side. The chassis features separate brake shoes, brake handles, linkage and auxiliary gear, meanwhile the bufferbeam is completed with metal buffer heads, a coupling hook and lamp iron. Like all Branchline models, metal wheelsets are fitted as standard to ensure smooth running, and NEM coupling pockets make it easy to fit an alternative coupling system where required. Details: Pristine ARC/Tiger Yellow livery Running No. TRL5313 Features: NEM Coupling Pockets Length 121mm (over couplings) - OO Scale

Bachmann POA Mineral Wagon 'ARC/Tiger' Yellow TRL5314 [W]

POA Mineral Wagon 'ARC/Tiger' Yellow TRL5314 [W] The POA Mineral Wagons were created in the late-1980s by building new bodies onto the chassis of redundant tank wagons in order to move aggregates. Owned by Tiger Rail, the wagons were leased to ARC and Foster Yeoman but within a few years, larger bogie wagons were being introduced and the POAs were gradually displaced onto a variety of traffic including scrap metal and coal. Later the wagons were purchased by British Rail and most ended up in engineering use. The Bachmann Branchline model employs a precision bodyshell with panel lines and ribs moulded both inside and out. Individual ladders are fitted to the body and chassis on each side. The chassis features separate brake shoes, brake handles, linkage and auxiliary gear, meanwhile the bufferbeam is completed with metal buffer heads, a coupling hook and lamp iron. Like all Branchline models, metal wheelsets are fitted as standard to ensure smooth running, and NEM coupling pockets make it easy to fit an alternative coupling system where required. Details: Weathered ARC/Tiger Yellow livery Running No. TRL5314 Features: NEM Coupling Pockets Length 121mm (over couplings) - OO Scale

Bachmann POA Mineral Wagon 'Yeoman/Tiger' Grey TRL5355

POA Mineral Wagon 'Yeoman/Tiger' Grey TRL5355 The POA Mineral Wagons were created in the late-1980s by building new bodies onto the chassis of redundant tank wagons in order to move aggregates. Owned by Tiger Rail, the wagons were leased to ARC and Foster Yeoman but within a few years, larger bogie wagons were being introduced and the POAs were gradually displaced onto a variety of traffic including scrap metal and coal. Later the wagons were purchased by British Rail and most ended up in engineering use. The Bachmann Branchline model employs a precision bodyshell with panel lines and ribs moulded both inside and out. Individual ladders are fitted to the body and chassis on each side. The chassis features separate brake shoes, brake handles, linkage and auxiliary gear, meanwhile the bufferbeam is completed with metal buffer heads, a coupling hook and lamp iron. Like all Branchline models, metal wheelsets are fitted as standard to ensure smooth running, and NEM coupling pockets make it easy to fit an alternative coupling system where required. Details: Pristine Yeoman/Tiger Grey livery Running No. TRL5355 Features: NEM Coupling Pockets Length 121mm (over couplings) - OO Scale

Bachmann POA Mineral Wagon 'Yeoman/Tiger' Grey TRL5363 [W]

POA Mineral Wagon 'Yeoman/Tiger' Grey TRL5363 [W] The POA Mineral Wagons were created in the late-1980s by building new bodies onto the chassis of redundant tank wagons in order to move aggregates. Owned by Tiger Rail, the wagons were leased to ARC and Foster Yeoman but within a few years, larger bogie wagons were being introduced and the POAs were gradually displaced onto a variety of traffic including scrap metal and coal. Later the wagons were purchased by British Rail and most ended up in engineering use. The Bachmann Branchline model employs a precision bodyshell with panel lines and ribs moulded both inside and out. Individual ladders are fitted to the body and chassis on each side. The chassis features separate brake shoes, brake handles, linkage and auxiliary gear, meanwhile the bufferbeam is completed with metal buffer heads, a coupling hook and lamp iron. Like all Branchline models, metal wheelsets are fitted as standard to ensure smooth running, and NEM coupling pockets make it easy to fit an alternative coupling system where required. Details: Weathered Yeoman/Tiger Grey livery Running No. TRL5363 Features: NEM Coupling Pockets Length 121mm (over couplings) - OO Scale

Bachmann BR OCA Open Wagon BR Railfreight Red 112038

BR OCA Open Wagon BR Railfreight Red 112038 The OCA wagons were introduced at the start of the 1980s, becoming British Rail’s final standard design for a general purpose open wagon with wide, low sides made up of three hinged sections etc. to allow all manner of cargo to be loaded and unloaded. Introduced at a time when general merchandise traffic was in decline, the type was soon redeployed to other areas like departmental use, or rebuilt as timber carriers becoming OTAs. The Bachmann Branchline model features fine moulding throughout; from the bodysides and the representation of the doors on each side including hinge and securing chain detailing, to the interior and in particular the wagon floor with engraved planks and further moulded details. The chassis features an ensemble of brake equipment while each axle is mounted to chassis via a separate axlebox assembly, allowing a degree of pivot and rotation to ensure this long wheelbase wagon can negotiate model railway curves. Details: Pristine BR Railfreight Red livery Running No. 112038 Features: NEM Coupling Pockets Length 156mm (over couplings) - OO Scale

Bachmann BR 35T 'Covhop' Covered Hopper BR Bauxite (TOPS) B870780

BR 35T 'Covhop' Covered Hopper BR Bauxite (TOPS) B870780 British Railways produced many standard designs for locomotives and rolling stock, amongst which was the CovHop introduced from 1952 to become the standard covered hopper wagon to transport powders such as sand, soda ash and sugar. The Branchline Covhop boasts a number of interchangeable features allowing individual wagons to be modelled accurately and the wagon depicted here is one with roller bearing axle boxes, OLEO buffers, and disc brakes – these are fitted to one side of the wagon only and necessitate that the wheels on that side are plain disc wheels, as opposed to the 3-hole disc wheels found on the non-braked side. The highly detailed bodyshell is adorned with separate walkways, roof hatches and end bracing, while gravity discharge doors are incorporated into the chassis amongst the running gear. Details: Pristine BR Bauxite (TOPS) livery Running No. B870780 Features: NEM Coupling Pockets Length 104mm (over couplings) - OO Scale

Bachmann LMS 10001 BR Lined Green (Late Crest) (Sound Fitted)

LMS 10001 BR Lined Green (Late Crest) (Sound Fitted) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model pays homage to the youngest of the pair, 10001. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system and these remained a feature of both locomotives thereafter, as displayed on this model of No. 10001 which is depicted in BR Green livery and with the late crests that were applied by BR from 1956. By this time the pair had returned to the Midland Region and were employed on duties across the region. The Bachmann Branchline model of No. 10001 is a highly detailed replica of the prototype, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10000 BR Black (Early)

LMS 10000 BR Black (Early) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model tells the story of No. 10000 during its time working on the Southern Region. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system as displayed on this model of No. 10000, which is depicted in its striking black and silver livery with early emblems. The Bachmann Branchline model is a highly detailed replica of the pioneering prototype, adorned with numerous separately fitted components to accurately capture the appearance of this iconic machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodysides Steps Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10000 BR Black (Early) (Sound Fitted)

LMS 10000 BR Black (Early) (Sound Fitted) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model tells the story of No. 10000 during its time working on the Southern Region. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system as displayed on this model of No. 10000, which is depicted in its striking black and silver livery with early emblems. The Bachmann Branchline model is a highly detailed replica of the pioneering prototype, adorned with numerous separately fitted components to accurately capture the appearance of this iconic machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodysides Steps Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10001 BR Lined Green (Late Crest)

LMS 10001 BR Lined Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model pays homage to the youngest of the pair, 10001. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system and these remained a feature of both locomotives thereafter, as displayed on this model of No. 10001 which is depicted in BR Green livery and with the late crests that were applied by BR from 1956. By this time the pair had returned to the Midland Region and were employed on duties across the region. The Bachmann Branchline model of No. 10001 is a highly detailed replica of the prototype, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann MR 3835 (4F) w/ Fowler Tender 43892 BR Black

MR 3835 (4F) w/ Fowler Tender 43892 BR Black The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black ‘British Railways’ livery Running No. 43892 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Fowler Tender 43892 BR Black (SF)

MR 3835 (4F) w/ Fowler Tender 43892 BR Black (Sound Fitted) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black ‘British Railways’ livery Running No. 43892 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack SOUND FITTED – Fitted with a ESU Loksound V5DCC 21 Pin DCC Sound Decoder Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Fowler Tender 43982 BR Black (Late)

MR 3835 (4F) w/ Fowler Tender 43982 BR Black (Late) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Late Crest livery Running No. 43982 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black (SF)

MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black (Sound Fitted) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine LMS Black livery Running No. 3850 Johnson-Deeley Tender Tall Chimney with Capuchon Ramsbottom Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack SOUND FITTED – Fitted with a ESU Loksound V5DCC 21 Pin DCC Sound Decoder Length 221mm (over couplings) OO Scale 

Bachmann LMS Jubliee 45671 'Prince Rupert' BR Lined Green (Early)

LMS Jubliee w/Riveted Tender 45671 'Prince Rupert' BR Lined Green (Early) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Early Emblem livery Running No. 45671 Named ‘Prince Rupert’ Etched Nameplates included Long Firebox Single Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubliee 45671 'Prince Rupert' BR Lined Green (Early) (SF)

LMS Jubliee w/Riveted Tender 45671 'Prince Rupert' BR Lined Green (Early) (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Early Emblem livery Running No. 45671 Named ‘Prince Rupert’ Etched Nameplates included Long Firebox Single Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS Jubliee 5742 'Connaught' LMS Crimson Lake

LMS Jubliee w/ Riveted Tender 5742 'Connaught' LMS Crimson Lake The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine LMS Crimson Lake livery Running No. 5742 Named ‘Connaught’ Etched Nameplates included Long Firebox Double Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS Jubliee 5742 'Connaught' LMS Crimson Lake (SF)

LMS Jubliee w/ Riveted Tender 5742 'Connaught' LMS Crimson Lake (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine LMS Crimson Lake livery Running No. 5742 Named ‘Connaught’ Etched Nameplates included Long Firebox Double Chimney Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS Jubilee 45596 'Bahamas' BR Lined Green (Late) (SF)

LMS Jubilee w/Welded Tender 45596 'Bahamas' BR Lined Green (Late) (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Locomotive is Preserved Pristine BR Lined Green Late Crest livery Running No. 45596 Named ‘Bahamas’ Etched Nameplates included Short Firebox Double Chimney Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate AWS Equipment Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubilee 45704 'Leviathan' BR Lined Green (Late)

LMS Jubilee w/Fowler Tender 45704 'Leviathan' BR Lined Green (Late) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 45704 Named ‘Leviathan’ Etched Nameplates included Long Firebox Single Chimney Riveted Fowler 3,500-gallon Tender with Water Pick-Up Gear Smokebox Door with Large Numberplate AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubilee 45704 'Leviathan' BR Lined Green (Late) (SF)

LMS Jubilee w/Fowler Tender 45704 'Leviathan' BR Lined Green (Late) (Sound Fitted) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 45704 Named ‘Leviathan’ Etched Nameplates included Long Firebox Single Chimney Riveted Fowler 3,500-gallon Tender with Water Pick-Up Gear Smokebox Door with Large Numberplate AWS Equipment Features: SOUND FITTED – Fitted with a Zimo MS450P22 Plux22 DCC Sound Decoder Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale  

Bachmann LMS Jubilee 45596 'Bahamas' BR Lined Green (Late)

LMS Jubilee w/Welded Tender 45596 'Bahamas' BR Lined Green (Late) The LMS Jubilee Class locomotive has long been a popular model in the Bachmann Branchline steam portfolio and for 2026 the Jubilee returns, better than ever before and with new tooling to allow models of the entire Class to be offered to modern standards for the first time. The Branchline model is constructed around a diecast metal running plate and employs precision moulded components like the boiler, firebox and cab which are then adorned with countless separate detailing parts like the metal handrails, turned brass safety valves and whistle, lamp irons, lubricators and sandboxes. With authentic pattern driving wheels and a detailed front bogie, the chassis is further enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. With a powerful three pole motor and a proven drive train, the Branchline Jubilee is surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Upgraded to include a firebox lighting system that works on both analogue and DCC, the DCC provision has also been enhanced and a Plux22 DCC decoder socket is now fitted in the tender along with a pre-fitted speaker making it easy to add sound. Details: Locomotive is Preserved Pristine BR Lined Green Late Crest livery Running No. 45596 Named ‘Bahamas’ Etched Nameplates included Short Firebox Double Chimney Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – Recommend Decoder  item No. 36-570A Length 261mm (over couplings) Three pole motor mounted in the locomotive, driving the central set of driving wheels Electrical pickup from all driving wheels along with tender pickups Diecast metal chassis block (locomotive) Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front bogie with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate Precision moulded boiler & firebox, cab, tender tank and tender chassis Separately fitted smokebox door which is mounted on hinges and can be posed open or closed Separately applied details including chimney, smokebox saddle, splashers, sandboxes, lubricators, water pick-up gear, reverser, lamp irons and smokebox door handles Individual metal detail components including handrails, handrail knobs, whistle, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator and reverser Hinged and posable metal fall plate between the locomotive and tender Sliding cab roof ventilator which can be posed open or closed Tender fitted with removable coal-effect load, with empty coal space modelled beneath Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in the tender of all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder pre-installed in SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Jubilee using recordings from real locomotives OO Scale

Bachmann LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early)

LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early) Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties and named more than a dozen after the holiday resorts that it served. We’ve selected one of the most famous destinations of them all – Blackpool – as the subject for this Branchline OO scale model. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine BR Lined Green Early Emblem livery Running No. 45524 Named ‘Blackpool’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale

Bachmann LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early) (SF)

LMS 5XP 'Patriot' 45524 'Blackpool' BR Lined Green (Early) (Sound Fitted) Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties and named more than a dozen after the holiday resorts that it served. We’ve selected one of the most famous destinations of them all – Blackpool – as the subject for this Branchline OO scale model. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine BR Lined Green Early Emblem livery Running No. 45524 Named ‘Blackpool’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale

Bachmann LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Crimson (SF)

LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Lined Crimson (Sound Fitted) Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties but sadly none were preserved, however The LMS Patriot Project was launched in 2008 to build a replica Patriot Class locomotive to represent this long-lost class and create a national memorial engine, recognising the role that class leader No. 5500 performed for the LMS from 1937. Bachmann is proud to support The LMS Patriot Project and by producing this model of ‘the Unknown Warrior’ we will be helping towards the completion of its full size counterpart. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine LMS Lined Crimson Lake livery Running No. 5551 Named ‘The Unknown Warrior’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale  

Bachmann LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Lined Crimson

LMS 5XP 'Patriot' 5551 'The Unknown Warrior' LMS Lined Crimson Add some LMS express power to your locomotive line up with the Bachmann Branchline LMS Patriot. The LMS built 52 of these locomotives for express passenger duties but sadly none were preserved, however The LMS Patriot Project was launched in 2008 to build a replica Patriot Class locomotive to represent this long-lost class and create a national memorial engine, recognising the role that class leader No. 5500 performed for the LMS from 1937. Bachmann is proud to support The LMS Patriot Project and by producing this model of ‘the Unknown Warrior’ we will be helping towards the completion of its full size counterpart. Boasting a high level of detail, the Branchline Patriot is constructed with a diecast metal running plate paired with a precision moulded boiler, firebox and cab capturing the loco’s distinctive appearance, most notably the parallel boiler and Fowler-designed cab. Etched metal smoke deflectors are then added, along with countless separate detailing parts like the metal handrails, turned brass safety valves, lamp irons and lubricators. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender, which itself is another precision moulded part, with several separately applied details including the lamp irons, tank vents, coal rails and handwheels. A realistic coal load is included whilst the tender chassis sports brake rigging and water pick-up gear. Sprung metal buffers are fitted to both the front of the locomotive and the rear of the tender. Within the cab, a detailed boiler backhead is present and the pipework and controls are enhanced with individual decoration. The ventilator on the cab roof is a separate part, allowing it to be posed in the open or closed position, or somewhere in between. The high level of decoration is not reserved only for the cab interior of course, and the model boasts an authentic rendition of the BR Lined Green livery complete with full-colour early emblems. The beautifully crafted livery application is finished with precision printed details like the running number, shed code and builders plaques, whilst etched nameplates are supplied for user-fitting to complete the look of this express locomotive. With a powerful three pole motor and a proven drive train, the Branchline Patriot is a surefooted machine that boasts electrical pickups from the driving wheels and tender wheels. Meanwhile, DCC provision comes in the form of a 21 Pin decoder socket and it’s easy to fit a speaker if you’re adding sound. Detail: Pristine LMS Lined Crimson Lake livery Running No. 5551 Named ‘The Unknown Warrior’ Etched Nameplates included Riveted Fowler Tender Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 260mm (over couplings) - OO Scale  

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem)

GCR 9J (J11) 64305 BR Black (Early Emblem) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted)

GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J 295 GCR Lined Black (Sound Fitted)

GCR 9J 295 GCR Lined Black (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The 9Js carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme with its ornate three-colour lining is reproduced to exquisite effect, with a rich and consistent finish throughout. The Great Central lettering and company crest on the tender is the icing on the cake, comprising no fewer than six separate colours and replicated using precision printing techniques for full authenticity. The Branchline 9J runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine Great Central Railway Lined Black livery Running No. 295 Smooth Smokebox Door with original Handwheel Top Front Lamp Iron mounted above the Smokebox Door Robinson Tapered Chimney Draught Retarder Original Tall Dome Ramsbottom Safety Valves Parallel Buffer Shanks with End Collars Central Rib on Cab Roof Tender fitted with Water Pick-Up Gear Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Composite S&DJR Lined Blue

54ft non-Corridor Composite S&DJR Lined Blue The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine S&DJR Lined Blue livery Running No. 55 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Third Caledonian Railway Plum & Off-White

54ft non-Corridor Third Caledonian Railway Plum & Off-White The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine Caledonian Railway Plum & Off-White livery Running No. 1422 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Third LBSCR Raw Umber

54ft non-Corridor Third LBSCR Raw Umber The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine LBSCR Raw Umber livery Running No. 2186 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Third S&DJR Lined Blue

54ft non-Corridor Third S&DJR Lined Blue The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine S&DJR Lined Blue livery Running No. 42 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale  

EFE Rail 54ft non-Corridor Brake Third Caledonian Railway Plum & OffWhite

54ft non-Corridor Brake Third Caledonian Railway Plum & Off-White The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine Caledonian Railway Plum & Off-White livery Running No. 1301 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Brake Third LBSCR Raw Umber

54ft non-Corridor Brake Third LBSCR Raw Umber The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine LBSCR Raw Umber livery Running No. 4935 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Brake Third S&DJR Lined Blue

54ft non-Corridor Brake Third S&DJR Lined Blue The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine S&DJR Lined Blue livery Running No. 134 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Composite Caledonian Railway Plum & Off-White

54ft non-Corridor Composite Caledonian Railway Plum & Off-White The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine Caledonian Railway Plum & Off-White livery Running No. 460 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

EFE Rail 54ft non-Corridor Composite LBSCR Raw Umber

54ft non-Corridor Composite LBSCR Raw Umber The EFE Rail 54ft non-Corridor Bogie Coaches are based on the brand’s highly acclaimed Isle of Wight Coaching stock – the prototypes for which were rebuilt from former London, Brighton & South Coast Railway vehicles before their move to the island. With no authentic coaching stock available to depict passenger operations of many of the Victorian railway companies, these EFE models give a true feel of train travel from yesteryear and come finished in authentic liveries for some of the pre-Grouping companies that have so far been uncatered for when it comes to ready to run coaching stock. Each model is produced using a high fidelity injection moulded bodyshell adorned with extra details, like the ornate metal handrails that are each separately fitted, the etched metal end steps and the emergency brake gear. Beneath each coach the truss rods have been authentically modelled alongside separate battery boxes, the Westinghouse brake components complete the look. Metal wheelsets are used throughout whilst the NEM coupling pockets are mounted on close-coupling mechanisms fitted to the coach chassis, providing close coupling whilst still allowing the models to negotiate second radius curves. Features: Pristine LBSCR Raw Umber livery Running No. 6162 NEM Coupling Pockets Length 236mm (over couplings) - OO Scale

Hornby Railroad: BR Class 60 60038 'Avesta Polarit' EWS (Sound Fitted)

Railroad: BR Class 60 60038 'Avesta Polarit' EWS (Sound Fitted) A growth in demand in the heavy haulage sector led to a review of BR’s available motive power in the 1980s. With 185 locomotives of the Type 5, 3,000+ horsepower category available, made up of its Classes 56 and 58, it was clear that more would be needed, and BR put out an invitation to tender for new locomotives in 1987.  The 100 locomotive order was awarded to Brush in Loughborough, and these entered service between 1989 and 1993. No.60038 was named ‘Bidean nam Bian’ after the Scottish ‘Munro’ in Glen Coe.  With BR’s trainload freight business broken up into shadow franchises, the locomotive became part of Loadhaul, based in the north-east. By 1996, this had become part of EWS and 60038 was named 'Avesta Polarit' after the steel making company at the DFDS Immingham sea terminal on 19th March 2002. It is now one of 14 owned by DC Rail and currently in store.  Our detailed RailRoad replica Class 60 model retains all the charm of the original, with enhanced durability and pre-fitted DCC sound features. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60039 'Dove Holes' DB Cargo

Railroad: BR Class 60 60039 'Dove Holes' DB Cargo  Entering service at Cardiff Canton in 1991, 60039 was originally named ‘Glastonbury Tor’ as part of the hills and peaks theme of the initial Class 60 naming convention.  It was later one of the locomotives selected for the ‘Super 60’ upgrade programme announced by DBS/DB Cargo in November 2010 that was designed to extend their working life by a further 15 years. No.60039 was named ‘Dove Holes’ in April 2015 and was used on limestone traffic out of Derbyshire. It is still owned by DB Cargo and is one of 52 members of the class put into storage by the company.  We've recreated this impressive locomotive in RailRoad form, bringing the most important details to life and adding features to enhance durability, making this the perfect model for regular layout use. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 60 60039 'Dove Holes' DB Cargo (Sound Fitted)

Railroad: BR Class 60 60039 'Dove Holes' DB Cargo (Sound Fitted)  Entering service at Cardiff Canton in 1991, 60039 was originally named ‘Glastonbury Tor’ as part of the hills and peaks theme of the initial Class 60 naming convention.  It was later one of the locomotives selected for the ‘Super 60’ upgrade programme announced by DBS/DB Cargo in November 2010 that was designed to extend their working life by a further 15 years. No.60039 was named ‘Dove Holes’ in April 2015 and was used on limestone traffic out of Derbyshire. It is still owned by DB Cargo and is one of 52 members of the class put into storage by the company.  We've recreated this impressive locomotive in RailRoad form, bringing the most important details to life and adding features to enhance durability, making this the perfect model for regular layout use. We've even included a pre-fitted sound chip so you can play authentic railway sounds as the model moves around your layout. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60069 'Humphrey Davy' (Sound Fitted)

Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector (Sound Fitted)  The Class 60s were the last heavy haulers built for BR. No.60069 was allocated to BR’s Train Load Freight (TLF) Coal Sector and named ‘Humphrey Davy’, in honour of the inventor of the miner’s safety lamp.  Following the break-up of TLF, the Class 60s were divided between three of the shadow franchises: Mainline Freight, Loadhaul, and Transrail Freight, but not long after they were formed they were absorbed into English, Welsh & Scottish (EWS). By 2007, it was estimated that the operational fleet was down to just 60 locomotives, the rest either in store or undergoing repair. That year, EWS was acquired by DB Schenker, a wholly-owned subsidiary of German railway company, Deutche Bahn.  Our RailRoad Class 60 model represents 'Humphrey Davy' in detail, but with added features that make for a much more durable locomotive. Plus, it is pre-fitted with a DCC sound chip for the most authentic model railway experience. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector

Railroad: BR Class 60 60069 'Humphrey Davy' Coal Sector The Class 60s were the last heavy haulers built for BR. No.60069 was allocated to BR’s Train Load Freight (TLF) Coal Sector and named ‘Humphrey Davy’, in honour of the inventor of the miner’s safety lamp.  Following the break-up of TLF, the Class 60s were divided between three of the shadow franchises: Mainline Freight, Loadhaul and Transrail Freight, but not long after they were formed they were absorbed into English, Welsh & Scottish (EWS). By 2007, it was estimated that the operational fleet was down to just 60 locomotives, the rest either in store or undergoing repair. That year, EWS was acquired by DB Schenker, a wholly-owned subsidiary of German railway company, Deutche Bahn.  Our RailRoad Class 60 model represents 'Humphrey Davy' in detail, but with added features that make for a much more durable locomotive. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby Railroad: BR Class 60 60038 'Avesta Polarit' EWS

Railroad: BR Class 60 60038 'Avesta Polarit' EWS  A growth in demand in the heavy haulage sector led to a review of BR’s available motive power in the 1980s.  With 185 locomotives of the Type 5, 3,000+ horsepower category available, made up of its Classes 56 and 58, it was clear that more would be needed, and BR put out an invitation to tender for new locomotives in 1987. The 100 locomotive order was awarded to Brush in Loughborough, and these entered service between 1989 and 1993. No.60038 was named ‘Bidean nam Bian’ after the Scottish ‘Munro’ in Glen Coe.  With BR’s trainload freight business broken up into shadow franchises, the locomotive became part of Loadhaul, based in the north-east. By 1996, this had become part of EWS and 60038 was named 'Avesta Polarit' after the steel making company, at the DFDS Immingham sea terminal on 19th March 2002. It is now one of 14 owned by DC Rail and currently in store.  Our RailRoad model is an accurate replica of this Class 60 locomotive, with high detail and design features for enhanced durability. Product features: Design based on extensive research and original drawings HM7000-21 Pin decoder compatible Space for a additional R7408 Enhanced Bass Speaker Working directional lights All wheel electrical pickup NEM couplings Brass axle bearings Separately fitted handrails, horns and exhaust - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST EMR 43274 & Intercity Swallow 43102 Pack

BR Class 43 HST EMR 43274 & Intercity Swallow 43102 Pack  This hybrid train pack represents the final months of HST operation with East Midland Railway in 2021, when 43274 became the first and only Class 43 to carry the interim EMR purple aubergine livery. Owned by Colas, it is still in service today. Meanwhile, 43102 was turned out in retro InterCity ‘Swallow’ livery in February 2021, recalling its record-setting feat with 43159, when they became the world’s fastest diesel locomotives attaining a speed of 148.5mph in November 1987. Withdrawn in May 2021, it is now part of the National Collection and on display at Shildon.  Our models feature NEM tension lock couplings, with the EMR locomotive sporting a stylish purple livery and the Intercity train painted in the iconic grey and white colours. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack

BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack This Virgin Class 43 HST 'Lady in Red' train pack brings the vibrant red and black livery to your model railway layout, creating quite an impression as it moves around the tracks. This OO gauge locomotive model has NEM tension lock couplings and a 21-pin socket, so you can upgrade to HM7000 control when you are ready.  Virgin Trains won both the InterCity West Coast and InterCity CrossCountry franchises following privatisation of BR, commencing services under its Virgin branding in 1997. It inherited a variety of locomotives and rolling stock from BR, including InterCity 125 HST sets.  Class 43 power car 43093 had been named ‘York Festival 88’ under BR, but was renamed ‘Lady in Red’ in 1997, which it carried until 2003, while 43097 had been called ‘The Light Infantry’ until 1990, but entered service with Virgin CrossCountry without a name. Painted in the company’s red and black livery, with white markings, both later became part of First Great Western’s HST fleet. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 43 HST Virgin West Coast Train Pack (Sound Fitted)

BR Class 43 HST Virgin West Coast 'Lady in Red' Train Pack (Sound Fitted) This Virgin Class 43 HST "Lady in Red' Train Pack brings the bold red branding of Virgin to your model railway layout, ensuring an eye-catching visual as it charges round the track. This OO model locomotive pack features NEM tension lock couplings and is ready-fited with HM7000 sound control, giving you a digital model railway experience.  Virgin Trains won both the InterCity West Coast and InterCity CrossCountry franchises following privatisation of BR, commencing services under its Virgin branding in 1997. It inherited a variety of locomotives and rolling stock from BR, including InterCity 125 HST sets.  Class 43 power car 43093 had been named ‘York Festival 88’ under BR, but was renamed ‘Lady in Red’ in 1997, which it carried until 2003, while 43097 had been called ‘The Light Infantry’ until 1990, but entered service with Virgin CrossCountry without a name. Painted in the company’s red and black livery, with white markings, both later became part of First Great Western’s HST fleet. - DCC HM7000 TXS Sound Fitted - OO Scale

Hornby LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour)

LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour) Train Pack  In 1988, Australia celebrated its bicentenary and, to mark the occasion, the world-famous ‘Flying Scotsman’ was invited to travel from Britain to take part in a series of railtours that were part of the ‘Aus Steam 88’ Festival, arriving in October that year.  Already resident in Western Australia since 1977, in the care of the Pilbara Railway Historical Society, former GWR ‘Castle’ Class 4-6-0 ‘Pendennis Castle’ was moved by road to Perth in early 1989 to operate alongside its one-time rival ‘A3’ Class ‘Pacific’. This unlikely reunion occurred almost 9,000 miles from where a week-long locomotive exchange once took place between the LNER and GWR, in April 1925.  This LNER and GWR Train Pack celebrates that landmark event in Australia 37 years ago in 1989. Featuring OO gauge locomotive model replicas of 'Flying Scotsman' and 'Pendennis Castle', these highly detailed designs include sprung metal buffers and NEM tension lock couplings for smooth rake creation. Add a 21-pin decoder to upgrade to HM7000 control. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition)

LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition) (150th Anniversary Collection) The LNER Class A4 Sir Nigel Gresley model locomotive is a limited edition model and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Gresley's birth, and this locomotive includes a figure.  With a shiny new blue livery and NEM tension lock couplings, this steam locomotive is a wonderful collector's piece.  Entering service with the LNER as 4498 in Garter blue with streamlined side-skirting and red wheels, this was the 100th Gresley ‘Pacific’ to be built when it emerged from Doncaster Works in October 1937. Allocated to King’s Cross ‘Top Shed’ and used on front-line express services such as the prestigious ‘Coronation’ between London and Edinburgh, ‘SNG’ was built with a single chimney and had stainless steel numbers and letters for the tender added at a general overhaul in January 1939.  After a period in wartime black, when the side-skirts were permanently removed, the locomotive returned to lined Garter blue in March 1947. Painted into BR’s express passenger blue in September 1950, as 60007, it set a post-war steam record speed of 112mph on 23 May 1959. Withdrawn in February 1966, by now in BR green, it was saved for preservation by the A4 Locomotive Society. - DCC Ready 21-Pin Socket - OO Scale

Hornby LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition)

LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition) (150th Anniversary Collection) The LMS Streamlined 'Coronation' model locomotive is a limited edition item and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Stanier's birth, and this locomotive includes a figure. With a shiny bold red livery and NEM tension lock couplings, this steam locomotive is a must-have for collectors. The ‘Princess Coronation’ Class, also known as the ‘Duchess’ Class, was an enlarged and improved version of William Stanier’s successful ‘Princess Royal’ Class ‘Pacific’. The first ten class members emerged from Crewe Works in a streamlined form during 1937 and five of these were put aside specifically for hauling the prestigious ‘Coronation Scot’ between London Euston and Glasgow Central. These were painted in Caledonian blue and had silver horizontal lining, which matched the carriages they pulled. No. 6220 set a new British steam speed record of 114mph in 1937, but this was beaten by the LNER’s ‘Mallard’ in 1938. Built with a single chimney, 6220 was the last of the original 15 to be fitted with a double blast pipe and chimney in 1944. The locomotive’s streamlined casing was removed in November 1946, and it finished its career in its rebuilt form with smoke deflectors as BR’s 46220 in April 1963. - DCC Ready 21-Pin Socket - OO Scale

Hornby Ruston & Hornsby 88DS 97088 Loadhaul (DVLR)

Ruston & Hornsby 88DS 97088 Loadhaul (DVLR) A total of 271 of Ruston & Hornsby’s ‘88DS’ four-wheel diesels were supplied mainly to industrial sites in the UK and overseas, and were rated at 80/88hp. Built in Lincoln between 1938 and 1967, seven of these were also used by BR’s North Eastern Region on departmental duties.  This model is finished in the distinctive ‘Loadhaul’ livery of black and orange. Formed in 1994 as part of the privatisation of BR, Loadhaul Ltd became part of EWS and subsequently DB Cargo. This OO design also features NEM tension lock couplings. - DCC Ready 6-Pin Socket - OO Scale

Hornby Ruston & Hornsby 88DS No.245030 Glenochil Yeast Factory

Ruston & Hornsby 88DS No.245030 Glenochil Yeast Factory Display the bold logo of Glenochil Yeast Factory on this 88DS model locomotive. This diesel features NEM tension lock couplings and a lovely green livery.  The 80/88hp Ruston & Hornsby 4wDM was a reliable machine and ideal for the modest demands of smaller industrial concerns. Several found use in Scotland shunting rail-connected whisky distillery yards – in this case the yeast factory alongside the distillery of the same name, located just south of Menstrie in Clackmannanshire, where sidings connected with the Cambus-Alva branch line.  Works No. 245030 was built in 1947 and worked the factory yard until 1969, when it was sold to William Kerr Ltd in Stirling. It moved to Babcock & Wilcox Ltd., boiler makers in Renfrew, in 1971, where it remained until about 1978, then presumably scrapped. - DCC Ready 6-Pin Socket - OO Scale

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved The BR English Electric DP1 'Deltic' is always a favourite model, and with its new blue livery, this OO gauge diesel engine is sure to be just as popular. This version features sprung metal buffers, NEM tension lock couplings and a coreless motor. It is also DCC-ready with a 21-pin socket for easy HM7000 conversion. Features include: High detail OO gauge model based on extensive research Presented as on display in Locomotion, Shildon, with grey chassis, steps and buffers; and horns removed Heavy, fully die-cast chassis and body Highly detailed cab interior Decorated driver controls with illuminated instrument dials Directional head and tail lighting Optional working Mars lights Working cab lights Engine bay lighting Physical switches on blanking plug to control the various lighting configurations Magnetic roof cover to access 21-Pin DCC socket Dual working roof fans, with manually adjustable speed controls Separately fitted etched window frames Large, powerful coreless motor with two flywheels for smooth running Dual bogie drive Sprung metal buffers Front and rear NEM coupling pocket Additional lamps supplied in the accessory bag Hand painted driver figures Supplied with 8 finely decorated etchings, including Locomotion headboard Decorated engine bay featuring printed ‘Napier Deltic’ plates Pre-fitted with a sugar cube speaker for easy digital conversion Space inside for HM7000 Enhanced Bass Speaker Space inside fuel tank for HM7070 - Power Bank Flange squeal sensor mounted in the bogies automatically detects when it is going round a curve to play flange squeal sounds dependant on speed. (Feature available once product is fitted with a HM7000 decoder) Fitted to display plinth with etched presentation plate Fully compatible with Hornby HM7000 app control system, with meticulously crafted Deltic sound profile (SD049) available for download. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Dark Blue

BR Class 08 08593/D3760 'Colchester TMD' Retro Lined Dark Blue  Add the Class 08 'Colchester TMD' model locomotive to your diesel collection in this elegant blue livery. With sprung metal buffers and NEM tension lock couplings, this is a delightful, highly detailed model.  Built at Crewe Works, this standard 350hp diesel electric shunter started life in November 1959 as D3760 and was allocated to Dannycraig depot at Swansea in South Wales. Under TOPS it was renumbered to 08593 and, in the 1990s, it was reallocated to Colchester where it received a retro-style red-lined BR livery with early ‘cycling lion’ emblem and its old number D3760.  It was also named ‘Colchester TMD’ which was applied in a cursive hand-writing style. It became part of the EWS fleet and, by 2010, it was withdrawn and then stored. It was acquired by Railway Support Services at Wishaw in 2016. - DCC Ready 8-Pin Socket - OO Scale

Hornby BR Class 10 10119 'Margaret Ethel-Thomas Alfred Naylor' BR Blue

BR Class 10 10119 'Margaret Ethel-Thomas Alfred Naylor' BR Blue (GCR Preserved)  This BR Class 10 is a stunning example of a non-standard locomotive, beautifully displayed in OO gauge model form. With sprung metal buffers and NEM tension lock couplings, this blue diesel locomotive is a highly detailled design for your model railway collection.  The BR Class 10 was a variation on the standard BR Class 08 shunter, fitted with Blackstone engines and GEC traction motors. Built at Darlington and Doncaster, 146 were produced between 1955 and 1962, but due to their non-standard nature, they were withdrawn early, between February 1967 and June 1972.  Built as D4067 in 1961 at Darlington, this locomotive initially worked at Darnall, Sheffield, followed by Langwith Junction and Shirebrook. Withdrawn in 1970, it was sold to the NCB and used at Betteshanger Colliery in Kent. It moved to Loughborough in 1980 for preservation and has been numbered 10119 and named after the owner’s parents. - DCC Ready 8-Pin Socket - OO Scale

Hornby BR Class 56 56001 BR Blue (TXS Sound Fitted)

BR Class 56 56001 BR Blue (TXS Sound Fitted) This BR Class 56 model locomotive is pre-fitted with sound and controllable via your HM7000 app for an impressive digital hobby experience. With sprung metal buffers and NEM tension lock couplings, this stylish blue and yellow model is a wonderful addition to your model railway layout.  The 50th anniversary of the completion of the first Class 56 is marked in 2026. The first of the 135-strong class arrived at Harwich from Romania in 1976, before commissioning by BR the following year. Only 30 examples were imported, due to relatively poor build quality, and these were subsequently rebuilt.  The remainder of the class were assembled by BREL at Doncaster and Crewe, with Ashford, Eastleigh, and Swindon supplying sub-assemblies, while Ruston-Paxman supplied the power units. No.56001 was new to Tinsley and withdrawn from Cardiff Canton in September 1996 after 19 years and six months in service with BR. - DCC Sound Fitted (HM7000) - OO Scale

Hornby BR Class 56 56047 Dutch Transrail (TXS Sound Fitted)

BR Class 56 56047 Dutch Transrail (TXS Sound Fitted) This Transrail Class 56 OO gauge model locomotive features a striking grey and yellow livery, with sprung metal buffers and NEM tension lock couplings. The highly detailed model is also pre-fitted with HM7000 sound capability for the most authentic experience.  Built at Doncaster Works, 56047 entered service at Toton in July 1978. Transrail Freight was set up as a trainload freight operator based in St Blazey, Cornwall, formed in 1994 from part of BR’s Trainload Freight division during the privatisation of British Rail. During this period, it acquired a number of Class 56 locomotives, retaining the Dutch-style livery but with the addition of Transrail’s logo and markings.  Transrail was one of a number of main line companies to be bought in 1996 to form new freight operator, English Welsh & Scottish (EWS). It was withdrawn in October 2003 and scrapped at Immingham. - DCC Sound Fitted (HM7000) - OO Scale

Hornby Stainer 5MT 'Black 5' 45473 BR Lined Black (Sound/Smoke Fitted)

Stainer 5MT 'Black 5' 45473 BR Lined Black (Sound/Smoke Fitted) The latest addition to our fleet of LMS Class 5MT model locomotives features our innovative steam generator technology. This highly detailed OO gauge model sends out burst of steam in time with the movement of the wheels for the most realistic running. Fitted with HM7000, it also includes sound and control from your mobile device. With sprung metal buffers and NEM tension lock couplings, this is an impressive locomotive for your model railway layout. History The Wiiliam Stanier-designed Class 5 was introduced in 1934 onto the LMS and by the time the last was built in 1951, the class was 842-strong. No. 45473 was completed at Derby in May 1943, entering service as 5473 and spending much of its working life in Scotland, being part of Perth’s allocation at the time of Nationalisation in 1948 and finishing its career at Dundee Tay Bridge. From there, it was withdrawn in November 1966 and subsequently scrapped at W.H. Arnott, Young at Co. Ltd, Carmyle, Glasgow the following February. Specific to R30475SS Running number 45473 BR Mixed Traffic livery Matt smokebox and cab roof finish. 5MT long wheelbase configuration. Flickering firebox. Fluted die-cast connecting rods. Walschaerts valve gear. Parallel buffer stocks. Common Class 5MT features High detail OO gauge model based on extensive research and original works drawings. Pre-fitted 21-pin HM7000 decoder and speaker. The decoder compatible with NMRA DCC controllers, HM7000 APP control and has the Merchant Navy sound profile pre-installed for accurate locomotive sounds, synchronised with the chuff rate. Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Die-cast chassis and running plate. Model weight is 360 grams. High detail cab and fully decorated backhead with decorated instrument dials. HM7000 Power Bank compatible. Powerful 5 pole skew wound motor. Illuminated flickering firebox. Illuminated head lamps and tail lamps (can be controlled using a DCC Decoder). Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Die-cast connecting rods and valve gear. Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Opening cab roof vent. Adjustable cab doors. Sprung metal buffers. Front and rear NEM coupling pocket. Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - DCC HM7000 TXS Sound Fitted w/ Smoke - OO Scale

Hornby Stanier 5MT 'Black 5' 45055 BR Lined Black (Early)

Stanier 5MT 'Black 5' 45055 BR Lined Black (Early)  Completed in November 1935, this ‘Black Five’ was built at Vulcan Foundry, near Newton-le-Willows in Lancashire.  It spent most of its working career in north-west England and North Wales, though in 1966 it had brief allocations at West Hartlepool and York, before moving back to the Liverpool area and serving at Bank Hall and then Aintree. It almost lasted to the end of steam, withdrawal coming a month shy on 6th July 1968 from Lostock Hall, Preston, with scrapping the following February.  This OO gauge locomotive model features sprung metal buffers and NEM tension lock couplings, and can be upgraded to HM7000 control with a 21-pin decoder (sold separately). Details: Running number 45055 BR Mixed Traffic livery Matt smokebox and cab roof finish 5MT long wheelbase configuration Flickering firebox Fluted die-cast connecting rods Walschaerts valve gear Parallel buffer stocks Features: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and running plate. Model weight is 360 grams High detail cab and fully decorated backhead with decorated instrument dials HM7000 21-Pin Decoder socket HM7000 Power Bank compatible Powerful 5 pole skew wound motor Illuminated flickering firebox Illuminated head lamps and tail lamps (can be controlled using a DCC Decoder) Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Electrical pickups on main drive wheels and tender wheels Die-cast connecting rods and valve gear Prototypical size metal handrails with brass stanchions Brass main drive bearings Opening cab roof vent Adjustable cab doors Sprung metal buffers Front and Rear NEM coupling pocket Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - OO Scale

Hornby SECR H Class 161 SECR Green

SECR H Class 161 SECR Green This OO gauge SECR H Class locomotive model is a faithful representation of Harry Wainwright's H Class. With sprung metal buffers and NEM tension lock couplings, this model is DCC ready with an 8-pin socket ready for upgrading to digital control.  Designed by Harry Wainwright, 66 of these locomotives were built for the South Eastern & Chatham Railway at its Ashford Works between 1904 and 1915 for London suburban and semi-fast trains. Completed in June 1909, 161 engines carried the elaborate SECR livery, like the locomotive depicted by the model, until receiving a lined olive green livery when taken into SR stock and renumbered 1161 at the Grouping in 1923.  It later became BR 31161 and was withdrawn at Tunbridge Wells West in November 1961 after a creditable 51 years and 5 months’ service - DCC Ready 6-Pin Socket - OO Scale

Hornby LNER K1 2005 LNER Apple Green (Preserved)

LNER K1 2005 LNER Apple Green (Preserved) The LNER K1 Class is a must-have addition to your steam model railway. With sprung metal buffers and NEM tension lock couplings, you can upgrade to DCC control by adding a 21-pin decoder (sold seperately).  The ‘K1s’ were useful and versatile engines, working extensively across former LNER territory, but were mostly associated with north-east England and also the West Highland Line to Fort William and Mallaig.  No. 62005 was the final member of the 70-strong class to remain in service, being withdrawn from Leeds Holbeck in December 1967. Though it survives today in preservation, it was initially acquired as a source of spares for already-preserved ‘K4’ 3442. However, in 1972 it was donated to the North Eastern Locomotive Preservation Group and based at the North Yorkshire Moors Railway, where it was restored in its own right, returning to steam in 1975. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER K1 62046 BR Lined Black (Early)

LNER K1 62046 BR Lined Black (Early) Add a BR (Early) K1 Class locomotive to your model railway layout today. This stylish OO steam engine features sprung metal buffers and NEM tension lock couplings, and you can upgrade to DCC control by adding a 21 pin decoder (sold seperately).  Built in 1949/50, after the formation of BR in 1948, but to an LNER design that was instigated by Edward Thompson, with the conversion of a three-cylinder ‘K4’ at Darlington in 1945, the two-cylinder ‘K1s’ were much modified by Thompson’s successor as Chief Mechanical Engineer, Arthur H Peppercorn. No.62046 emerged from the North British Locomotive Works in Glasgow in October 1949 and was first allocated to Darlington shed. After a reallocation to York (North) in June 1956, the locomotive ended its career there in February 1967 and was scrapped by Hughes Bolckow at Blyth during April. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER P2 2004 'Mons Meg' LNER Apple Green

LNER P2 2004 'Mons Meg' LNER Apple Green 'Mons Meg' is a stunning example of one of Nigel Gresley's P2 engines, sporting a stylish green livery. It has sprung metal buffers and NEM tension lock couplings, with a 21-pin socket ready for upgrade to HM7000 control.  Nigel Gresley designed the P2s for hauling heavy express trains along the demanding route between Edinburgh and Aberdeen. Six were introduced between 1934 and 1936. The first three locomotives differed in appearance, the third having the wedge-shaped front similar to the A4s which was adopted for the remainder of the class. The first two also later converted.  Even then, 2004 was fitted with an experimental butterfly valve blastpipe bypass and the last two also had design differences, meaning that none of the six were built the same. All were subsequently rebuilt by Thompson as conventional Pacifics in 1943/4 by Gresley’s successor, Edward Thompson. - DCC Ready 21-Pin Socket - OO Scale  

Hornby LNER B12 61516 BR Lined Black (Late)

LNER B12 61516 BR Lined Black (Late)  A shining replica of the BR B12 Class, this OO gauge model is highly detailed, with sprung metal buffers and NEM tension lock couplings. Upgrade to HM7000 with a 21-pin decoder (sold seperately).  Stephen D Holden designed the ‘S69’ inside cylinder 4-6-0s for the Great Eastern Railway. First introduced in 1911, it was the last of 71 built before the Grouping appeared in 1921. However, a further ten were constructed by Beyer, Peacock for the LNER in 1928, by which time they had been designated the ‘B12’ Class.  Built at Stratford Works in 1913, 1516 entered traffic on GER expresses out of London’s Liverpool Street station in the November. In 1924, it was renumbered 8516, then 1516 under the LNER’s 1947 renumbering scheme. A year later it became BR’s 61516 and was withdrawn from Cambridge in July 1958. - DCC Ready 8-Pin Socket - OO Scale

Hornby LNER B12 8572 LNER Apple Green

LNER B12 8572 LNER Apple Green  This locomotive was one of the final batch of ten ‘B12s’ built by Beyer, Peacock in Manchester in 1928. It was renumbered 1572 by the LNER in 1946, but soon became BR’s 61572 in 1948.  Withdrawn from Norwich Thorpe in September 1961, it was acquired by the Midland & Great Northern Joint Railway Society and moved to the nascent North Norfolk Railway at Sheringham in 1967, where, since completion of its overhaul in 1995, it has been a mainstay of heritage services.  The original is currently out of ticket, undergoing overhaul, so the model is presented in as-preserved condition – the only surviving example of a British inside-cylinder 4-6-0. This highly detailed model features sprung metal buffers and NEM tension lock couplings for effortless rake-building. - DCC Ready 8-Pin Socket - OO Scale  

Hornby L&MR Robert Stephenson’s 'Rocket'

L&MR Robert Stephenson’s 'Rocket'  For the first time, Stephenson's Rocket is presented as a solo locomotive, with a sleek yellow livery, fixed metal buffers and chain couplings. This highly detailed, diminuitive locomotive model is a must-have model for steam collectors, due to its historical importance and incredible model engineering.  This historically important locomotive was built in 1929 to participate in the Rainhill Trials, a competition set-up by the promoters of the Liverpool and Manchester Railway to find suitable motive power for its opening the following year. Built to the order of his father George (who was the L&MR’s principal engineer at the time), ‘Rocket’ was designed by Robert Stephenson and built at his Forth Street Works in Newcastle-upon-Tyne.  The design was the most advanced in its day and ‘Rocket’ won the Trials. The locomotive then became one of four that took part in the L&MR’s opening parade in September 1930. - DCC Ready 6-Pin Socket - OO Scale

Hornby GWR Castle Class 5071 'Spitfire' BR Lined Green (Early)

GWR Castle Class 5071 'Spitfire' BR Lined Green (Early)  This locomotive entered service with the GWR at Newton Abbot in June 1938, initially named ‘Clifford Castle’, but this was changed to 'Spitfire' during the Second World War following the aeroplane’s pivotal role in the Battle of Britain during 1940.  It then spent most of its career shedded in the West Country, though after nationalisation, it had spells in the late 1950s at Gloucester and Worcester. The locomotive was fitted with a double chimney and four-row superheater in June 1959, before moving to St. Philip’s Marsh, Plymouth in February 1962, from where it was withdrawn in October 1963.  This detailed OO gauge model depicts 5071 in its original form, with a smart green livery. It also features sprung metal buffers, NEM tension lock couplings and a 21-pin socket, ready for upgrade to HM7000. - DCC Ready 21-Pin Socket - OO Scale

Hornby GWR Large Prairie 51xx Class 5153 BR Lined Green (Late)

GWR Large Prairie 51xx Class 5153 BR Lined Green (Late) Our highly detailed Large Prairie Locomotives feature sprung metal buffers and NEM tension lock couplings for smooth running and effortless rake creation. This Class 5101 model sports a lovely green livery and is a delightful addition to any steam collection.  Designed for suburban and local passenger services, 140 of these large ‘Prairies’ were built at Swindon between 1929 and 1949. These locomotives were a development of Churchward’s 1903 ‘31XX/51XX’ Class overseen by GWR Chief Mechanical Engineer, Charles Collett. New to Chester West shed, 5153 entered service in March 1930 and enjoyed a career that lasted almost 35 years.  After moving to Newton Abbot in the 1940s, it had a spell at Kidderminster before reaching Leamington in 1964, which was its final shed, withdrawal coming just three months later. It was scrapped in June 1965. - DCC Ready 8-Pin Socket - OO Scale

Hornby GWR Large Prairie 61xx Class 6126 British Railways Green

GWR Large Prairie 61xx Class 6126 British Railways Green A lovely addition to any OO gauge layout, this BR Class 61XX Large Prairie Locomotive is gorgeous in green. With sprung metal buffers and NEM tension lock couplings, this is a deligtful, highly detailed steam locomotive.  The ‘61XX’ Class was a direct development of the earlier ‘5101’ Class by Charles Collett, with a total of 70 locomotives turned out at Swindon Works between 1931 and 1935. The main difference was an increase in boiler pressure, which was raised to 225psi and gave a consequent increase in tractive effort.  No. 6126 entered service in October 1931 and spent much of its career based along the main Paddington to Bristol line, with postings at Slough, Southall, Reading, and Didcot. Its last shed was Oxford from May 1964, where it was withdrawn in December 1965 and sent for scrapping at Cashmore’s in Newport. - DCC Ready 8-Pin Socket - OO Scale

Hornby BR Standard Class 9F 92031 BR Black (Early)

BR Standard Class 9F 92031 BR Black (Early) The smart black BR (Early) Class 9F makes a wonderful OO gauge model locomotive addition to your collection. With sprung metal buffers and NEM tecnsion lock couplings, this model is DCC ready with a 21-pin socket. New to March in Cambridgeshire in November 1954, 92031 was one of 251 ‘standard’ heavy freight locomotives built to the design of Robert Riddles between January 1954 and March 1960. Its working career took it to allocations at New England (Peterborough), Annesley, Westhouses and Newton Heath, Manchester, from where it was withdrawn in January 1967 after an incredibly short working life of just 12 years and almost two months. Scrapped at T.W. Ward at Killamarsh, near Sheffield, the locomotive was always paired with a standard BR1F tender. - DCC Ready 21-Pin Socket - OO Scale

Hornby BR Rebuilt Merchant Navy 35028 'Clan line' BR Green (Preserved)

BR Rebuilt Merchant Navy 35028 'Clan line' BR Lined Green (Preserved) The BR Rebuilt Merchant Navy 'Clan Line' is back in OO model form. This newly tooled model locomotive has sprung metal buffers and NEM tension lock couplings and is a highly detailed replica of a popular steam engine. One of the last of its class to be built, this locomotive was completed after nationalisation of Britain’s railways to Bulleid’s Southern ‘Merchant Navy’ design, complete with streamlined casing and chain-driven valve gear, entering service in December 1948. It didn’t receive its name until January 1951, during a ceremony at Southampton Docks. Like all 30 members of the class, ‘Clan Line’ was rebuilt, in its case, during 1959, and remained in service until withdrawal from Nine Elms, London in July 1947. It was subsequently saved privately for preservation and is a regular main line performer, once hauling the prestigious Belmond British Pullman. MODEL SPECIFICATION Die-cast chassis, pony truck and trailing truck Die-cast boiler and running plate Merchant Navy Bullied-Firth-Brown wheels High detail cab and fully decorated backhead with decorated instrument dials Powerful 5 pole skew wound motor with cardan shaft and flywheel Flywheel with cardan shaft arrangement for smooth running Pogo pin wheel pickup arrangement for easy pickup servicing Die-cast connecting rods and valve gear Oilite main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Optional fit rear flanged wheelset. Only recommended for larger layouts with sweeping curves or for display purposes Wheel pickups on the main locomotive and tender wheelsets Separately fitted simulated coal load. TOOLING High detail OO gauge model based on extensive research, 3D scanning and original works drawings Cast trailing truck Modern 6000 gallon tender with additional pump, air tanks and battery arrangement for main line running (as preserved) Opening cab roof vent DCC Fitted with a 21-pin decoder socket Flickering firebox Working cab light MCU controlled electric front lamps for full lamp code control Working tender lamps Eight-way locomotive to tender connection LIVERY BR Lined Green livery - OO Scale

Hornby BR Rebuilt Merchant Navy 35028 'Clan line' BR Green(Sound/Smoke)

BR Rebuilt Merchant Navy 35028 'Clan line' BR Lined Green (Sound/Smoke Fitted) The BR Rebuilt Merchant Navy 'Clan Line' is back in OO model form. This newly tooled model locomotive has sprung metal buffers and NEM tension lock couplings and is a highly detailed replica of a popular steam engine. One of the last of its class to be built, this locomotive was completed after nationalisation of Britain’s railways to Bulleid’s Southern ‘Merchant Navy’ design, complete with streamlined casing and chain-driven valve gear, entering service in December 1948. It didn’t receive its name until January 1951, during a ceremony at Southampton Docks. Like all 30 members of the class, ‘Clan Line’ was rebuilt, in its case, during 1959, and remained in service until withdrawal from Nine Elms, London in July 1947. It was subsequently saved privately for preservation and is a regular main line performer, once hauling the prestigious Belmond British Pullman. Please Note: this model requires a DCC controller or the HM7000 app to control.  Specific to R30490SS: STEAM GENERATOR Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Adjustable steam output settings via the decoder Water reservoir for up to 20 minutes continuous steam running MODEL SPECIFICATION Die-cast chassis, pony truck and trailing truck Die-cast boiler and running plate Merchant Navy Bullied-Firth-Brown wheels High detail cab and fully decorated backhead with decorated instrument dials Powerful 5 pole skew wound motor with cardan shaft and flywheel Flywheel with cardan shaft arrangement for smooth running Pogo pin wheel pickup arrangement for easy pickup servicing Die-cast connecting rods and valve gear Oilite main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Optional fit rear flanged wheelset. Only recommended for larger layouts with sweeping curves or for display purposes Wheel pickups on the main locomotive and tender wheelsets Separately fitted simulated coal load. TOOLING High detail OO gauge model based on extensive research, 3D scanning and original works drawings Cast trailing truck Modern 6000 gallon tender with additional pump, air tanks and battery arrangement for main line running (as preserved) Opening cab roof vent DCC Fitted with a 21-pin decoder socket Flickering firebox Working cab light MCU controlled electric front lamps for full lamp code control Working tender lamps Eight-way locomotive to tender connection LIVERY BR Lined Green livery - OO Scale

Hornby Battle of Britain Class (Rebuilt) 34053 '303 Squadron' BR Green

Battle of Britain Class (Rebuilt) 34053 '303 Squadron' BR Lined Green The BR Battle of Britain Class '303 Squadron' model locomotive brings military pride to your model railway layout. With sprung metal buffers and NEM tension lock couplings, you can upgrade this OO model to HM7000 control by adding a 21-pin decoder (sold seperately).  This locomotive was built in 1947 at the SR’s Brighton Works as 21C153 and named ‘Sir Keith Park’. It was built to Bulleid’s three-cylinder air-smoothed design with chain drive and an oil-bath for lubrication. Along with many of its classmates, it was rebuilt to Jarvis’ more conventional design with air smooth casing removed and Walschaerts valve gear fitted.  Withdrawn in 1965, it was later rescued from Barry scrapyard and returned to steam by Southern Locomotives Ltd. In 2024, it was temporarily renamed ‘303 Squadron’ at the Spa Valley Railway in honour of the Polish fighter squadron that fought in the Battle of Britain. - DCC Ready 21-Pin Socket - OO Scale

Bachmann Class 47/7 47791 'Venice Simplon Orient Express' RES

Class 47/7 47791 'Venice Simplon Orient Express' RES Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Rail Express Systems livery Running No. 47791 Named ‘Venice Simplon Orient Express’ Etched Nameplates and Depot Plaques included Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Cut-Cab Locomotive Bufferbeam-mounted ETH Equipment Scottish Jumper Cables TDM Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight RES Taillights with Multifaceted Lenses Round Buffers Checker Plate Kickplate below Cab Door Partially-plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/7 47791 'Venice Simplon Orient Express' RES (SF Deluxe)

Class 47/7 47791 'Venice Simplon Orient Express' RES (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Rail Express Systems livery Running No. 47791 Named ‘Venice Simplon Orient Express’ Etched Nameplates and Depot Plaques included Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Cut-Cab Locomotive Bufferbeam-mounted ETH Equipment Scottish Jumper Cables TDM Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight RES Taillights with Multifaceted Lenses Round Buffers Checker Plate Kickplate below Cab Door Partially-plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/7 47791 'Venice Simplon Orient Express' RES (SF)

Class 47/7 47791 'Venice Simplon Orient Express' RES (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Rail Express Systems livery Running No. 47791 Named ‘Venice Simplon Orient Express’ Etched Nameplates and Depot Plaques included Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Cut-Cab Locomotive Bufferbeam-mounted ETH Equipment Scottish Jumper Cables TDM Jumper Cables Single Arm Windscreen Wipers High Intensity Headlight RES Taillights with Multifaceted Lenses Round Buffers Checker Plate Kickplate below Cab Door Partially-plated Cab Roof Vents Serck Radiator Grilles Smooth Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/8 47826 WCRC Maroon

Class 47/8 47826 WCRC Maroon Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine West Coast Railways Company Maroon livery Running No. 47826 Plated Headcode Panels with Sealed Beam Marker Lights Twin Bufferbeam Brackets denoting a Crewe-built Machine Cut-Cab Locomotive Bufferbeam-mounted ETH Equipment Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Checker Plate Kickplate below Cab Door Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Later Extended Range Fuel Tanks NRN Aerials Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive (fitted at the No. 2 End) Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 D1940 BR Two-Tone Green (SYP)

Class 47/0 D1940 BR Two-Tone Green (SYP) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Two-Tone Green (Small Yellow Panels) livery Running No. D1940 Glazed Headcode Panels Single Bufferbeam Bracket denoting a Brush-built Machine Double Arm Windscreen Wipers Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Clayton Roof Boiler Port 1250 Gallon Water Tanks Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 D1940 BR Two-Tone Green (SYP) (Sound Fitted)

Class 47/0 D1940 BR Two-Tone Green (SYP) (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Two-Tone Green (Small Yellow Panels) livery Running No. D1940 Glazed Headcode Panels Single Bufferbeam Bracket denoting a Brush-built Machine Double Arm Windscreen Wipers Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Clayton Roof Boiler Port 1250 Gallon Water Tanks Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47280 BR Railfreight Grey (Sound Fitted)

Class 47/0 47280 BR Railfreight Grey (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Railfreight Grey livery Running No. 47280 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port 1,200 Gallon Water Tanks with Water Filler Valves Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 D1922 BR Two-Tone Green (SYP)

Class 47/0 D1922 BR Two-Tone Green (SYP) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Two-Tone Green (Small Yellow Panels) livery Running No. D1922 Glazed Headcode Panels Single Bufferbeam Bracket denoting a Brush-built Machine Double Arm Windscreen Wipers Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Clayton Roof Boiler Port 1250 Gallon Water Tanks Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 D1922 BR Two-Tone Green (SYP) (Sound Fitted Deluxe)

Class 47/0 D1922 BR Two-Tone Green (SYP) (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Two-Tone Green (Small Yellow Panels) livery Running No. D1922 Glazed Headcode Panels Single Bufferbeam Bracket denoting a Brush-built Machine Double Arm Windscreen Wipers Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Clayton Roof Boiler Port 1250 Gallon Water Tanks Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47226 BR Blue (Sound Fitted Deluxe)

Class 47/0 47226 BR Blue (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47226 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47238 BR Blue

Class 47/0 47238 BR Blue Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47238 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47238 BR Blue (Sound Fitted Deluxe)

Class 47/0 47238 BR Blue (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47238 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47238 BR Blue (Sound Fitted)

Class 47/0 47238 BR Blue (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47238 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47280 BR Railfreight Grey

Class 47/0 47280 BR Railfreight Grey Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Railfreight Grey livery Running No. 47280 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port 1,200 Gallon Water Tanks with Water Filler Valves Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47280 BR Railfreight Grey (Sound Fitted Deluxe)

Class 47/0 47280 BR Railfreight Grey (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Railfreight Grey livery Running No. 47280 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Twin Bufferbeam Brackets denoting a Crewe-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port 1,200 Gallon Water Tanks with Water Filler Valves Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

EFE Rail Class 313 3-Car EMU 313036 BR Blue & Grey

Class 313 3-Car EMU 313036 BR Blue & Grey Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Blue & Grey livery Running No. 313036 Three-car unit comprising car Nos. E62564, E71248 & E62628 Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313061 BR Network SouthEast

Class 313 3-Car EMU 313061 BR Network SouthEast Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Network SouthEast livery Running No. 313026 Three-car unit comprising car Nos. 62554, 71228 & 62618 Destination blinds displaying ‘Moorgate’ & ‘Stevenage’ Features ‘Great Northern Line’ branding Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313114 Silverlink Metro

Class 313 3-Car EMU 313114 Silverlink Metro Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine Silverlink Metro livery Running No. 313114 Three-car unit comprising car Nos. 62542, 71226 & 62606 Destination blinds displaying ‘Richmond’ & ‘North Woolwich’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313121 Network Rail Yellow

Class 313 3-Car EMU 313121 Network Rail Yellow Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine Network Rail yellow livery Running No. 313121 Three-car unit comprising car Nos. 62549, 71233 & 62613 Destination boards displaying ‘Special’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313201 BR Blue & Grey (Southern)

Class 313 3-Car EMU 313201 BR Blue & Grey (Southern) Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine retro BR Blue & Grey (Southern) livery Running No. 313201 Three-car unit comprising car Nos. 62529, 71213 & 63593 Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313211 Southern (Coastway)

Class 313 3-Car EMU 313211 Southern (Coastway) Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine Southern (Coastway) livery Running No. 313211 Three-car unit comprising car Nos. 62539, 71223 & 62603 Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 314 3-Car EMU 314201 Strathclyde PTA Carmine & Cream

Class 314 3-Car EMU 314201 Strathclyde PTA Carmine & Cream Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine Strathclyde PTA Carmine & Cream livery Running No. 314201 Three-car unit comprising car Nos. 64583, 71450 & 64584 Destination boards displaying ‘Glasgow Central’ & ‘Neilston’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 314 3-Car EMU 314202 BR Strathclyde PTE Orange & Black

Class 314 3-Car EMU 314202 BR Strathclyde PTE Orange & Black Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Strathclyde PTE Orange & Black livery Running No. 314202 Three-car unit comprising car Nos. SC64585, SC71451 & SC64586 Destination boards displaying ‘Newton via Queens Park’ & ‘Glasgow Central via Queens Park’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 314 3-Car EMU 314211 BR Blue & Grey 'Trans-Clyde'

Class 314 3-Car EMU 314211 BR Blue & Grey 'Trans-Clyde' Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Blue & Grey ‘Trans-Clyde’ livery Running No. 314211 Three-car unit comprising car Nos. 64603, 71460 & 64604 Destination boards displaying ‘Dumbarton Central via Singer, Glasgow Central and Blantyre’ and ‘Larhall via Singer, Glasgow Central and Blantyre’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 314 3-Car EMU 314212 ScotRail Saltire

Class 314 3-Car EMU 314212 ScotRail Saltire Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine Scotrail Saltire livery Running No. 314212 Three-car unit comprising car Nos. 64605, 71461 & 64606 Destination boards displaying ‘Glasgow Central’ & ‘Gourock’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313018 BR Network SouthEast

Class 313 3-Car EMU 313018 BR Network SouthEast Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Network SouthEast livery Running No. 313018 Three-car unit comprising car Nos. 62546, 71230 & 62610 Destination blinds displaying ‘Watford Junction’ & ‘Euston’ Features ‘North London Lines’ branding Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313026 West Anglia Great Northern (WAGN)

Class 313 3-Car EMU 313026 West Anglia Great Northern (WAGN) Purple Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine West Anglia Great Northern Purple livery Running No. 313024 Three-car unit comprising car Nos. 62552, 71236 & 61616 Destination blinds displaying ‘Moorgate’ & ‘Hertford North’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

EFE Rail Class 313 3-Car EMU 313034 BR Blue & Grey

Class 313 3-Car EMU 313034 BR Blue & Grey Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework. Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles. Details: Pristine BR Blue & Grey with deep brown chassis livery Running No. 313034 Three-car unit comprising car Nos. E62562, E71246 & E62626 Destination blinds displaying ‘2K12 Moorgate’ Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 799mm Coreless motor powering both bogies in centre car Diecast metal chassis provides strong driving mechanism and low centre of gravity 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing NEM coupling fitted at driving cab ends Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode and destination panels Cab lighting High-intensity headlights where applicable Passenger saloon lighting Door interlock lights (controllable via DCC) - OO Scale

Bachmann Class 13 D4502 BR Green (Wasp Stripes) DCC Sound Fitted

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied

Bachmann Class 13 D4502 BR Green (Wasp Stripes) Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied

Bachmann Class 13 13003 BR Blue - DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 13003 BR Blue - Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 D4502 BR Green (Wasp Stripes)

Bachmann Branchline OO Scale Era 6 Pristine BR Green (Wasp Stripes) livery Running No. D4502 LMS Pattern Buffers Equipped with two Plux22 DCC Decoder Sockets – recommended Decoder item No. 36-570B (x2) Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only

Hornby Railroad: Class 31 31271 'Stratford' Triple Grey Construction

Railroad: Class 31 31271 'Stratford 1840 - 2001' Triple Grey Construction This Hornby RailRoad Class 31 model is presented in the Trainload construction livery, bringing a modern splash of colour to your 00-gauge layout. Based on the reliable Brush Type 2 locomotives, this model features wide-tension lock couplings and moulded plastic. DCC ready, it comes fitted with a 21-pin decoder socket, allowing for easy digital upgrade. History: Originally introduced in the late 1950s, the Class 31s became a familiar sight across the British railway network, known for their versatility and longevity. Locomotive No. 31271, preserved in working order, has seen continued use in the modern era and now wears the vibrant Trainload Construction livery — a striking nod to its role in supporting infrastructure projects across the capital. - OO Scale

Hornby Railroad: Class 37 093 PoliceAdvert (Sound Fitted)

Railroad: Class 37 37093 Police BR 125 Advert (Sound Fitted) Recognised for its memorable role in a television advert – flagging down a speeding HST power car, this highly detailed model of Class 37 No. 37093 comes presented in its unique ‘Police’ promotional livery. Complete with a roof-mounted working blue light and DCC sound-fitted with Class 37 and effects, functions, and an authentic police siren straight out of the box. Equipped with NEM tension lock couplings and plastic buffers, this Co-Co diesel is built to perform on second radius curves or greater. History: Built at English Electric’s Robert Stephenson & Hawthorns works, this locomotive entered BR service as D6793 in 1963, allocated to Gateshead. Re-numbered 37093 in February 1974, it was painted into ‘Police’ livery, complete with blue light, for a BR television advertising campaign in July 1985, before returning to a more traditional livery at Stratford in August. It was renumbered 37509 in June 1986 and in 1989 allocated to the Freight Metals sector Thornaby pool. It finished its career with EWS and was cut up at Cardiff Canton in August 2005. - OO Scale

Hornby Railroad: Class 37 37419 'Carl Haviland' DRS Compass (SF)

Railroad: Class 37 37419 'Carl Haviland' DRS Compass (Sound Fitted) This sound-fitted Hornby RailRoad Class 37 No. 37419 ‘Carl Haviland’ is presented in Direct Rail Services livery complete with commemorative nameplate. Equipped with a 21-pin decoder preloaded with authentic Class 37 sound profiles, it delivers rich, immersive audio straight from the box.  Detail highlights include separately fitted plastic buffers, NEM tension lock couplings, and an accessory bag for added customisation. Designed to run on second radius curves or greater, this model combines performance, presentation, and sound in one standout locomotive. History: This locomotive entered service with BR in 1965 as D6991 allocated to Cardiff Canton, but was renumbered to 37291 in March 1974. It was rebuilt as a Class 37/4 and renumbered 37419 in 1985 and transferred to Scotland, entering the Provincial General Pool at inverness in 1989.  Reallocated to Thornaby as part of the Railfreight Construction sub-sector the following year, after many moves and sector allocations, it passed via EWS to Direct Rail Services in 2011. Since 2019 it has carried InterCity mainline livery and was named ‘Carl Haviland 1954-2012’.  - OO Scale

Hornby Railroad: Class 31 31271 'Stratford' Construction (Sound Fitted)

Railroad: Class 31 31271 'Stratford 1840 - 2001' Triple Grey Construction (Sound Fitted) This Hornby RailRoad Class 31 model is presented in the Trainload construction livery, bringing a modern splash of colour to your 00-gauge layout. Based on the reliable Brush Type 2 locomotives, this model features wide-tension lock couplings and moulded plastic. DCC ready, it comes fitted with a 21-pin decoder socket, allowing for easy digital upgrade. History: Originally introduced in the late 1950s, the Class 31s became a familiar sight across the British railway network, known for their versatility and longevity. Locomotive No. 31271, preserved in working order, has seen continued use in the modern era and now wears the vibrant Trainload Construction livery — a striking nod to its role in supporting infrastructure projects across the capital. - OO Scale

Hornby Class 67 67015 DB Cargo "Leading the Next Generation"

Class 67 67015 DB Cargo "Leading the Next Generation of Rail Freight" This Class 67 No. 67015 model is finished in the vibrant DB Schenker red livery, reflecting its current use on premium services with Transport for Wales. Fitted with a 21-pin decoder socket, it is DCC ready for easy digital conversion. Sprung metal buffers and NEM couplings provide enhanced realism. With its powerful modern profile and push-pull capability, 67015 makes an ideal addition to any contemporary diesel or mixed-traffic collection. History: Thirty of these locomotives were built for EWS by Alstom in Spain in 1999/2000 as replacements for Class 47s, for use mainly on Royal Mail trains, but after mail contracts were lost in 2003/4 have been used on passenger trains.Transferred to DB Cargo by 2015, 67015 spent a period on lease to Wrexham & Shropshire trains and was named ‘David J. Lloyd’.  It is now one of a dozen leased to Transport for Wales for its premium services, currently running in DB Schenker red, and can be used in push-pull mode with Mk4 coaches and a DVT (Driving Van Trailer). - OO Scale

Hornby BR Class 153 153360 Serco Northern Rail

BR Class 153 153360 Serco Northern Rail The Hornby Class 153 No. 153360 is finished in the distinctive Northern Rail livery, representing its appearance during regular service in the north of England. It is DCC ready with a 21-pin decoder socket for easy digital upgrade and fitted with NEM couplings. History: The Northern Rail franchise commenced in December 2004 and inherited its fleet from those of Arriva Trains Northern and First North Western, including a large number of Class 153 single units, of which No. 153360 was one.  Under Northern Rail, the unit saw considerable use in the Carlisle area, including services on the Settle and Carlisle line and the Cumbria coastal line to Barrow-in-Furness.  Arriva Rail North, Northern Rail’s successor from 2016, operated the largest fleet of Class 153 units in the UK. No. 153360 went into storage in late 2021 and was subsequently scrapped. - OO Scale

Hornby SR Class M7 318 Southern Olive Green

SR Class M7 318 Southern Olive Green This Hornby model of Southern Railway ‘M7’ Class No. 318 is presented in authentic Era 3 condition, reflecting the locomotive’s appearance during its SR service. DCC ready with an 8-pin socket, it offers an easy route to digital control, while sprung metal buffers and NEM couplings ensure realistic detail. A faithful tribute to one of Drummond’s iconic tank engines. History: Dugald Drummond designed the ‘M7’ 0-4-4Ts as a more powerful replacement for the ageing Adams ‘T1’ Class used on the LSWR’s London suburban passenger services, with 105 examples built at Nine Elms (95) and Eastleigh (10) between 1897 and 1911.  No. 318 entered service in August 1900, and kept its number throughout its Southern Railway days until becoming 30318 under BR in 1950. Withdrawal came just nine years later, in December 1959, when it was scrapped. - OO Scale

Hornby LNER Class J52 68846 BR Lined Black (Late)

LNER Class J52 68846 BR Lined Black (Late) Common J13/J52 Features: New Tooling - High detail OO Gauge model based on extensive research and original works drawings. Diecast Boiler, Chassis and Running Plate. Model Weight is 235 grams. High detail cab and fully decorated backhead with decorated instrument dials. Decoder controlled firebox flicker. (decoder sold separately). HM7000 21-Pin sound decoder compatible. HM7000 Power Bank compatible. Powerful 5 Pole Skew wound motor. Pogo pin wheel pickup arrangement for easy pickup servicing. Diecast connecting rods. Prototypical size metal handrails with brass stanchions. Oilite main drive bearings. Opening cab roof vent. Sprung metal buffers. Front and Rear NEM coupling pocket. Rear coupling pocket had a close coupling mechanism. Wheel pickups on all wheels. Accessory bag contains vacuum pipes, lamps and couplings. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. History: This locomotive entered service as one of Henry Ivatt’s ‘J13’ Class as No. 1247, having been built under contract by Sharp, Stewart in 1899. It became LNER ‘J52’ 4247 at the Grouping in 1923, and later 8846 under the LNER’s 1946 renumbering scheme.  It entered BR service as 68846 and was withdrawn from King’s Cross ‘Top Shed’ in May 1959, at which point it became the first preserved locomotive to be bought directly from BR when it was acquired by Captain W.G. Smith. It is now part of the National Collection and restored as GNR 1247. - OO Scale

Bachmann Class 66/5 66501 Freightliner 60 1965-2025 Orange

Class 66/5 66501 Freightliner 60 1965-2025 Orange  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Orange livery Running No. 66501 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Widely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/5 66501 Freightliner 60 1965-2025 Orange (SFD)

Class 66/5 66501 Freightliner 60 1965-2025 Orange (Sound Fitted Deluxe) The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Orange livery Running No. 66501 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Widely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/5 66501 Freightliner 60 1965-2025 Orange (Sound Fitted)

Class 66/5 66501 Freightliner 60 1965-2025 Orange (Sound Fitted)  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Orange livery Running No. 66501 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Widely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/6 66601 Freightliner 60 1965-2025 Green

Class 66/6 66601 Freightliner 60 1965-2025 Green  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Green livery Running No. 66601 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/6 66601 Freightliner 60 1965-2025 Green (SFD)

Class 66/6 66601 Freightliner 60 1965-2025 Green (Sound Fitted Deluxe)  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Green livery Running No. 66601 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/6 66601 Freightliner 60 1965-2025 Green (Sound Fitted)

Class 66/6 66601 Freightliner 60 1965-2025 Green (Sound Fitted) The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Green livery Running No. 66601 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/0 66096 EWS

Class 66/0 66096 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66096 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66015 EWS

Class 66/0 66015 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66015 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann JGA Bogie Hopper DB Schenker Red 'RMC 19232'

JGA Bogie Hopper DB Schenker Red 'RMC 19232' The JGA Bogie Hoppers were built in Slovakia in the mid-1990s for Buxton Lime Industries and Tilcon, primarily working from Tunstead Quarry, operated by Buxton Lime Industries, near Buxton on the edge of the Peak District. Consisting of a large hopper with three pairs of bottom discharge doors, the wagons were used to transport lime products from the quarry for distribution around the UK and the type remains in use in limited numbers today. Reproduced in OO Scale by Bachmann Branchline, the JGA model features a precision moulded bodyshell which captures the wagon’s distinctive sloping ends with their ribbed constructed. Below the solebar, the three sets of discharge doors are added separately, meanwhile a metal weight is concealed above each bogie to ensure smooth running. The bogies themselves are fitted with metal wheels and axles whilst the integrated NEM coupling pockets allow alternative couplings to be fitted with ease. Separate brakes are added and the bogies each sport spring and suspension detailing in full relief. The bold red livery of DB Schenker faithfully adorns the model, complete with the various markings and operating instructions that are found on the real wagons. Features: Pristine DB Schenker Red livery Running No. RMC 19232 NEM Coupling Pockets Length 199mm (over couplings) - Era 9 - OO Scale

Bachmann JGA Bogie Hopper VTG Grey 'VTG 19214'

JGA Bogie Hopper VTG Grey 'VTG 19214' The JGA Bogie Hoppers were built in Slovakia in the mid-1990s for Buxton Lime Industries and Tilcon, primarily working from Tunstead Quarry, operated by Buxton Lime Industries, near Buxton on the edge of the Peak District. Consisting of a large hopper with three pairs of bottom discharge doors, the wagons were used to transport lime products from the quarry for distribution around the UK and the type remains in use in limited numbers today. Reproduced in OO Scale by Bachmann Branchline, the JGA model features a precision moulded bodyshell which captures the wagon’s distinctive sloping ends with their ribbed constructed. Below the solebar, the three sets of discharge doors are added separately, meanwhile a metal weight is concealed above each bogie to ensure smooth running. The bogies themselves are fitted with metal wheels and axles whilst the integrated NEM coupling pockets allow alternative couplings to be fitted with ease. Separate brakes are added and the bogies each sport spring and suspension detailing in full relief. Whilst it could be said that the plain grey livery is the very definition of simplicity, the model’s paintwork is applied flawlessly complete with the VTG lettering and logo alongside the various markings and operating instructions that are found on the real wagons. Features: Pristine VTG Grey livery Running No. VTG 19214 NEM Coupling Pockets Length 199mm (over couplings) - Era 9 - OO Scale

Bachmann HKA Bogie Hopper DB Schenker '300649'

HKA Bogie Hopper DB Schenker '300649' The HKA Bogie Hopper Wagons originated from JMA Coal Hoppers which were ordered by National Power in the mid-1990s. After being acquired by EWS, many of the JMA fleet were fitted with new bogies and the resulting wagons received the TOPS code HKA – with their use subsequently expanded to aggregate traffic too. It is these wagons that form the prototype for this Bachmann Branchline model and the two variants – inner or outer wagons – can be modelled to suit individual needs. In normal operation HKAs run in fixed rakes with only buffers and conventional couplings fitted to the outer ends of the rake. Wagon-to-wagon coupling is by means of a buckeye, negating the need for buffers. The Branchline model can be configured as either; for an outer wagon the rectangular buffers, drawbar hook and screw-link coupling are fitted into the relevant bufferbeam receptacles, with a dummy tail lamp provided too, while for an inner variant the buckeye coupling and buckeye coupling lever is added. Features: Pristine DB Schenker Red Livery Running No. 300649 Accessory Pack NEM Coupling Pockets Length 267mm (over couplings) - Era 9 - OO Scale

Bachmann 35 Ton PAV Bulk Grain Wagon BRT Brown

35 Ton PAV Bulk Grain Wagon BRT Brown The 35 Ton Grain Hopper Wagons, sometimes known as Whisky Covhops (COVered HOPpers), were built in the late-1960s for the transportation of grain from growing regions like East Anglia and South East England to the whisky distilleries of Scotland. The 4 wheel hopper wagons provided an increased payload over the types they replaced and were operated by Associated British Maltsters Ltd. And Scottish Malt Distillers. At first bold and colourful advertising boards were carried on the sides of wagons, but these were soon removed leaving just the brown livery, although some were later painted into the more eye catching ‘Grainflow’ scheme of green and grey. In later years some wagons were used on Alumina traffic in Scotland but all had been withdrawn before the end of the twentieth century. Features: Pristine BRT Brown Livery Running No. 7587 Length 118mm (over couplings) - Era 7 - OO Scale

Bachmann 35 Ton PAV Bulk Grain Wagon BRT Brown [W]

35 Ton PAV Bulk Grain Wagon BRT Brown [W] The 35 Ton Grain Hopper Wagons, sometimes known as Whisky Covhops (COVered HOPpers), were built in the late-1960s for the transportation of grain from growing regions like East Anglia and South East England to the whisky distilleries of Scotland. The 4 wheel hopper wagons provided an increased payload over the types they replaced and were operated by Associated British Maltsters Ltd. And Scottish Malt Distillers. At first bold and colourful advertising boards were carried on the sides of wagons, but these were soon removed leaving just the brown livery, although some were later painted into the more eye catching ‘Grainflow’ scheme of green and grey. In later years some wagons were used on Alumina traffic in Scotland but all had been withdrawn before the end of the twentieth century. Features: Weathered BRT Brown Livery Running No. 7616 Length 118mm (over couplings) - Era 7 - OO Scale

Bachmann 35 Ton PAA Bulk Grain Wagon 'Grainflow' Green & Grey [W]

35 Ton PAA Bulk Grain Wagon 'Grainflow' Green & Grey [W]  The 35 Ton Grain Hopper Wagons, sometimes known as Whisky Covhops (COVered HOPpers), were built in the late-1960s for the transportation of grain from growing regions like East Anglia and South East England to the whisky distilleries of Scotland. The 4 wheel hopper wagons provided an increased payload over the types they replaced and were operated by Associated British Maltsters Ltd. And Scottish Malt Distillers. At first bold and colourful advertising boards were carried on the sides of wagons, but these were soon removed leaving just the brown livery, although some were later painted into the more eye catching ‘Grainflow’ scheme of green and grey. In later years some wagons were used on Alumina traffic in Scotland but all had been withdrawn before the end of the twentieth century. Features: Weathered ‘Grainflow’ Green & Grey Livery Running No. BRT 7781 Length 118mm (over couplings) - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31188 BR Engineers Dutch (Sound Fitted)

Class 31/1 Refurbished 31188 BR Engineers Dutch (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Engineers Grey & Yellow livery Running No. 31188 Etched Depot Plaque and BR Double Arrow Included Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods High Intensity Headlights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/4 Refurbished 31423 'Jerome K. Jerome' BR InterCity

Class 31/4 Refurbished 31423 'Jerome K. Jerome' BR InterCity The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR InterCity (Mainline) livery Running No. 31423 Named ‘Jerome K. Jerome’ Etched Nameplates Included Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/4 Refurbished 31423 'Jerome K. Jerome' InterCity (SF)

Class 31/4 Refurbished 31423 'Jerome K. Jerome' BR InterCity (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR InterCity (Mainline) livery Running No. 31423 Named ‘Jerome K. Jerome’ Etched Nameplates Included Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/4 Refurbished 31423 'Jerome K. Jerome' InterCity (SFD)

Class 31/4 Refurbished 31423 'Jerome K. Jerome' BR InterCity (Sound Fitted Deluxe) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR InterCity (Mainline) livery Running No. 31423 Named ‘Jerome K. Jerome’ Etched Nameplates Included Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 5848 BR Blue (Sound Fitted Deluxe)

Class 31/1 5848 BR Blue (Sound Fitted Deluxe) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Blue livery Running No. 5848 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 1D26 and 2B63 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 5848 BR Blue (Sound Fitted)

Class 31/1 5848 BR Blue (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Blue livery Running No. 5848 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 1D26 and 2B63 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 Refurbished 31188 BR Engineers Dutch

Class 31/1 Refurbished 31188 BR Engineers Dutch The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Engineers Grey & Yellow livery Running No. 31188 Etched Depot Plaque and BR Double Arrow Included Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods High Intensity Headlights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 Refurbished 31188 BR Engineers Dutch (SFD)

Class 31/1 Refurbished 31188 BR Engineers Dutch (Sound Fitted Deluxe)  The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Engineers Grey & Yellow livery Running No. 31188 Etched Depot Plaque and BR Double Arrow Included Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods High Intensity Headlights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 31101 BR Blue

Class 31/1 31101 BR Blue The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Blue livery Running No. 31101 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2B99 and 6M65 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 31101 BR Blue (Sound Fitted Deluxe)

Class 31/1 31101 BR Blue (Sound Fitted Deluxe)  The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Blue livery Running No. 31101 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2B99 and 6M65 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 31101 BR Blue (Sound Fitted)

Class 31/1 31101 BR Blue (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Blue livery Running No. 31101 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2B99 and 6M65 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 5848 BR Blue

Class 31/1 5848 BR Blue The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Blue livery Running No. 5848 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 1D26 and 2B63 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 30 D5574 BR Green (Small Yellow Panels) (SFD)

Class 30 D5574 BR Green (Small Yellow Panels) (Sound Fitted Deluxe)  The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Green (Small Yellow Panels) livery Running No. D5574 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 5 76 and 4M35 Original Windscreen Washer Jets (Uncovered) Full Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins Mirrlees Engine Exhaust Ports Mirrlees Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 30 D5574 BR Green (Small Yellow Panels) (Sound Fitted)

Class 30 D5574 BR Green (Small Yellow Panels) (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Green (Small Yellow Panels) livery Running No. D5574 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 5 76 and 4M35 Original Windscreen Washer Jets (Uncovered) Full Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins Mirrlees Engine Exhaust Ports Mirrlees Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 30 D5862 BR Green (Small Yellow Panels)

Class 30 D5862 BR Green (Small Yellow Panels) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Green (Small Yellow Panels) livery Running No. D5862 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2J05 and 1M77 Original Windscreen Washer Jets (Uncovered) Full Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins Mirrlees Engine Exhaust Ports Mirrlees Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 30 D5862 BR Green (Small Yellow Panels) (SFD)

Class 30 D5862 BR Green (Small Yellow Panels) (Sound Fitted Deluxe) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Green (Small Yellow Panels) livery Running No. D5862 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2J05 and 1M77 Original Windscreen Washer Jets (Uncovered) Full Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins Mirrlees Engine Exhaust Ports Mirrlees Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 30 D5862 BR Green (Small Yellow Panels) (Sound Fitted)

Class 30 D5862 BR Green (Small Yellow Panels) (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Green (Small Yellow Panels) livery Running No. D5862 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2J05 and 1M77 Original Windscreen Washer Jets (Uncovered) Full Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins Mirrlees Engine Exhaust Ports Mirrlees Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 30 D5574 BR Green (Small Yellow Panels)

Class 30 D5574 BR Green (Small Yellow Panels) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Green (Small Yellow Panels) livery Running No. D5574 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 5 76 and 4M35 Original Windscreen Washer Jets (Uncovered) Full Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins Mirrlees Engine Exhaust Ports Mirrlees Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann NER E Tank 495 NER Lined Green & Maroon (Sound Fitted)

NER E Tank 495 NER Lined Green & Maroon (Sound Fitted) Details on this model: Pristine NER Lined Green & Maroon Livery Running No. 495 Boiler Clack Valves Ramsbottom Safety Valves Bell Whistle Steam Brakes Only Plain Smokebox Door Twin Smokebox Door Handles Parallel Shank Buffers with Round Mounts Original Bunker without Coal Rails Rear Cab Windows without Bars Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks, cab and bunker Separately applied details including splashers, tank filler hatches, safety valves, dome and chimney, smokebox handles, clack valves* and vacuum pipes* (*where applicable) Individual metal detail components including handrails, handrail knobs, guard irons, lamp irons and turned metal whistle Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted regulator, reverser and handbrake Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, poseable lamps and three-link couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED models are used on analogue) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann NER E (J71) Tank 317 LNER Lined Black

NER E (J71) Tank 317 LNER Lined Black  Details on this model: Pristine LNER Lined Black Livery Running No. 317 Boiler Clack Valves Ramsbottom Safety Valves Pipe Whistle Steam Brakes Only Plain Smokebox Door Smokebox Door Handwheel Parallel Shank Buffers with Round Mounts Coal Bunker with Coal Rails fitted Rear Cab Windows without Bars Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks, cab and bunker Separately applied details including splashers, tank filler hatches, safety valves, dome and chimney, smokebox handles, clack valves* and vacuum pipes* (*where applicable) Individual metal detail components including handrails, handrail knobs, guard irons, lamp irons and turned metal whistle Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted regulator, reverser and handbrake Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, poseable lamps and three-link couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED models are used on analogue) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann NER E (J71) Tank 317 LNER Lined Black (Sound Fitted)

NER E (J71) Tank 317 LNER Lined Black (Sound Fitted) Details on this model: Pristine LNER Lined Black Livery Running No. 317 Boiler Clack Valves Ramsbottom Safety Valves Pipe Whistle Steam Brakes Only Plain Smokebox Door Smokebox Door Handwheel Parallel Shank Buffers with Round Mounts Coal Bunker with Coal Rails fitted Rear Cab Windows without Bars Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks, cab and bunker Separately applied details including splashers, tank filler hatches, safety valves, dome and chimney, smokebox handles, clack valves* and vacuum pipes* (*where applicable) Individual metal detail components including handrails, handrail knobs, guard irons, lamp irons and turned metal whistle Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted regulator, reverser and handbrake Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, poseable lamps and three-link couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED models are used on analogue) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann NER E (J71) Tank 68260 BR Black (Early Emblem)

NER E (J71) Tank 68260 BR Black (Early Emblem) Details on this model: Pristine BR Black Early Emblem Livery Running No. 68260 Boiler Clack Valves Removed Ross Pop Safety Valves with Cover Pipe Whistle Steam Brakes Only Smokebox Door with Numberplate Twin Smokebox Door Handles Group Standard Buffers with Square Mounts Coal Bunker with Coal Rails fitted Rear Cab Windows with Bars fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks, cab and bunker Separately applied details including splashers, tank filler hatches, safety valves, dome and chimney, smokebox handles, clack valves* and vacuum pipes* (*where applicable) Individual metal detail components including handrails, handrail knobs, guard irons, lamp irons and turned metal whistle Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted regulator, reverser and handbrake Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, poseable lamps and three-link couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED models are used on analogue) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann NER E (J71) Tank 68260 BR Black (Early Emblem) (Sound Fitted)

NER E (J71) Tank 68260 BR Black (Early Emblem) (Sound Fitted) Details on this model: Pristine BR Black Early Emblem Livery Running No. 68260 Boiler Clack Valves Removed Ross Pop Safety Valves with Cover Pipe Whistle Steam Brakes Only Smokebox Door with Numberplate Twin Smokebox Door Handles Group Standard Buffers with Square Mounts Coal Bunker with Coal Rails fitted Rear Cab Windows with Bars fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 118mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks, cab and bunker Separately applied details including splashers, tank filler hatches, safety valves, dome and chimney, smokebox handles, clack valves* and vacuum pipes* (*where applicable) Individual metal detail components including handrails, handrail knobs, guard irons, lamp irons and turned metal whistle Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted regulator, reverser and handbrake Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, poseable lamps and three-link couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED models are used on analogue) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted)

LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black

LMS 8F with Riveted Tender 8233 LMS Black The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted Deluxe)

LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted)

LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (SF)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (SFD)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest) (SF)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest) (SFD)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W]

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (SF)

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (SFD)

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black

LMS 8F with Riveted Tender 8036 LMS Black The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted Deluxe)

LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LB&SCR E4 Tank 2487 SR Black (Sunshine) (Sound Fitted)

LB&SCR E4 Tank 2487 SR Black (Sunshine) (Sound Fitted) The E4 Class 0-6-2 Radial Tank was one of the most successful and versatile tank locomotives that the Southern Railway inherited upon Grouping in 1923, with all 75 locomotives that the London, Brighton & South Coast Railway had constructed around the turn of the century passing to the SR, and all but one would make it to BR ownership as well. The Bachmann Branchline model of the E4 is just as versatile, featuring diecast metal construction supplemented with high-fidelity injection moulded parts to create a model as strong and capable as its prototype. What’s more, the Branchline E4 has been upgraded for 2025 and now features a Next18 DCC decoder socket and provision for a speaker, allowing SOUND FITTED models to be offered for the first time. Details on This Model: Pristine SR Black (Sunshine) Livery Running No. 2487 Dished Smokebox Door Westinghouse Brakes and Vacuum Brakes Lever Reverser Cab Roof Mounted Whistle Enclosed Coal Rails Raised Smokebox Rivets Countersunk Bufferbeam Rivets Steam Injector and Pipes Boiler Clack Valves Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 149mm (over couplings) 3-Pole motor Electrical pickup from all driving wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Sprung rear radial truck Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Space is provided for a speaker to be fitted along with connection points on the PCB SOUND FITTED models include a pre-fitted speaker Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann LB&SCR E4 Tank 2505 SR Maunsell Green (Sound Fitted)

LB&SCR E4 Tank 2505 SR Maunsell Green (Sound Fitted) The E4 Class 0-6-2 Radial Tank was one of the most successful and versatile tank locomotives that the Southern Railway inherited upon Grouping in 1923, with all 75 locomotives that the London, Brighton & South Coast Railway had constructed around the turn of the century passing to the SR, and all but one would make it to BR ownership as well. The Bachmann Branchline model of the E4 is just as versatile, featuring diecast metal construction supplemented with high-fidelity injection moulded parts to create a model as strong and capable as its prototype. What’s more, the Branchline E4 has been upgraded for 2025 and now features a Next18 DCC decoder socket and provision for a speaker, allowing SOUND FITTED models to be offered for the first time. Details on This Model: Pristine SR Maunsell Green Livery Running No. 2505 Dished Smokebox Door Westinghouse Brakes and Vacuum Brakes Lever Reverser Cab Roof Mounted Whistle Enclosed Coal Rails Raised Smokebox Rivets Countersunk Bufferbeam Rivets Steam Injector and Pipes Boiler Clack Valves Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 149mm (over couplings) 3-Pole motor Electrical pickup from all driving wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Sprung rear radial truck Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Space is provided for a speaker to be fitted along with connection points on the PCB SOUND FITTED models include a pre-fitted speaker Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann LB&SCR E4 Tank 32473 BR Lined Black (Early Emblem)

LB&SCR E4 Tank 32473 BR Lined Black (Early Emblem) The E4 Class 0-6-2 Radial Tank was one of the most successful and versatile tank locomotives that the Southern Railway inherited upon Grouping in 1923, with all 75 locomotives that the London, Brighton & South Coast Railway had constructed around the turn of the century passing to the SR, and all but one would make it to BR ownership as well. The Bachmann Branchline model of the E4 is just as versatile, featuring diecast metal construction supplemented with high-fidelity injection moulded parts to create a model as strong and capable as its prototype. What’s more, the Branchline E4 has been upgraded for 2025 and now features a Next18 DCC decoder socket and provision for a speaker, allowing SOUND FITTED models to be offered for the first time. Details on This Model: Locomotive is now Preserved Pristine BR Lined Black (Early Emblem) Livery Running No. 32473 Dished Smokebox Door with Numberplate Westinghouse Brakes and Vacuum Brakes Lever Reverser Firebox Mounted Whistle Enclosed Coal Rails Countersunk Bufferbeam Rivets Smokebox Saddle Mounted Oil Pots Steam Injector and Pipes Boiler Clack Valves Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 149mm (over couplings) 3-Pole motor Electrical pickup from all driving wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Sprung rear radial truck Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Space is provided for a speaker to be fitted along with connection points on the PCB SOUND FITTED models include a pre-fitted speaker Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Bachmann LB&SCR E4 Tank 32473 BR Lined Black (Early Emblem)(Sound Fitted)

LB&SCR E4 Tank 32473 BR Lined Black (Early Emblem) (Sound Fitted) The E4 Class 0-6-2 Radial Tank was one of the most successful and versatile tank locomotives that the Southern Railway inherited upon Grouping in 1923, with all 75 locomotives that the London, Brighton & South Coast Railway had constructed around the turn of the century passing to the SR, and all but one would make it to BR ownership as well. The Bachmann Branchline model of the E4 is just as versatile, featuring diecast metal construction supplemented with high-fidelity injection moulded parts to create a model as strong and capable as its prototype. What’s more, the Branchline E4 has been upgraded for 2025 and now features a Next18 DCC decoder socket and provision for a speaker, allowing SOUND FITTED models to be offered for the first time. Details on This Model: Locomotive is now Preserved Pristine BR Lined Black (Early Emblem) Livery Running No. 32473 Dished Smokebox Door with Numberplate Westinghouse Brakes and Vacuum Brakes Lever Reverser Firebox Mounted Whistle Enclosed Coal Rails Countersunk Bufferbeam Rivets Smokebox Saddle Mounted Oil Pots Steam Injector and Pipes Boiler Clack Valves Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 149mm (over couplings) 3-Pole motor Electrical pickup from all driving wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Sprung rear radial truck Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Space is provided for a speaker to be fitted along with connection points on the PCB SOUND FITTED models include a pre-fitted speaker Zimo MS590N18 DCC Sound Decoder fitted to SOUND FITTED versions - OO Scale

Dapol KQA/KTA Container Wagon Tiphook Blue 4907 011 7 (OO)

KQA/KTA Container Wagon Tiphook Blue 4907 011 7 During the 1990's the growing use of 9'6" tall (High Cube) containers was causing problems for freight  operators transporting them on height restricted UK railway lines using standard intermodal flat bed wagons. The Tiphook approach to solve this problem was not the conventional solution of lowering the platform and using smaller wheels, instead they designed a latticed platform that sat low down, below the top level of the bogies and a pocket was formed with the slab sides that gave the wagon strength and rigidity. In total seventy five of these wagons were built by Rautaruuki in Finland. They were delivered in two batches between 1997 and 1998 and bore a blue Tiphook livery. Features: Highly detailed body moulding  Accurately applied livery  NEM pockets and couplings fitted as standard  Previous models shown for illustration only  *Containers sold separately    - OO Scale

Dapol KQA/KTA Container Wagon Tiphook Blue 4907 033 1 (OO)

KQA/KTA Container Wagon Tiphook Blue 4907 033 1 During the 1990's the growing use of 9'6" tall (High Cube) containers was causing problems for freight  operators transporting them on height restricted UK railway lines using standard intermodal flat bed wagons. The Tiphook approach to solve this problem was not the conventional solution of lowering the platform and using smaller wheels, instead they designed a latticed platform that sat low down, below the top level of the bogies and a pocket was formed with the slab sides that gave the wagon strength and rigidity. In total seventy five of these wagons were built by Rautaruuki in Finland. They were delivered in two batches between 1997 and 1998 and bore a blue Tiphook livery. Features: Highly detailed body moulding  Accurately applied livery  NEM pockets and couplings fitted as standard  Previous models shown for illustration only  *Containers sold separately    - OO Scale

Dapol KQA/KTA Container Wagon Touax GERS 97752 (OO)

KQA/KTA Container Wagon Touax GERS 97752  During the 1990's the growing use of 9'6" tall (High Cube) containers was causing problems for freight  operators transporting them on height restricted UK railway lines using standard intermodal flat bed wagons. The Tiphook approach to solve this problem was not the conventional solution of lowering the platform and using smaller wheels, instead they designed a latticed platform that sat low down, below the top level of the bogies and a pocket was formed with the slab sides that gave the wagon strength and rigidity. In total seventy five of these wagons were built by Rautaruuki in Finland. They were delivered in two batches between 1997 and 1998 and bore a blue Tiphook livery. Features: Highly detailed body moulding  Accurately applied livery  NEM pockets and couplings fitted as standard  Previous models shown for illustration only  *Containers sold separately    - OO Scale

Dapol KQA/KTA Container Wagon Touax GERS 97763 (OO)

KQA/KTA Container Wagon Touax GERS 97763 During the 1990's the growing use of 9'6" tall (High Cube) containers was causing problems for freight  operators transporting them on height restricted UK railway lines using standard intermodal flat bed wagons. The Tiphook approach to solve this problem was not the conventional solution of lowering the platform and using smaller wheels, instead they designed a latticed platform that sat low down, below the top level of the bogies and a pocket was formed with the slab sides that gave the wagon strength and rigidity. In total seventy five of these wagons were built by Rautaruuki in Finland. They were delivered in two batches between 1997 and 1998 and bore a blue Tiphook livery. Features: Highly detailed body moulding  Accurately applied livery  NEM pockets and couplings fitted as standard  Previous models shown for illustration only  *Containers sold separately    - OO Scale

Dapol GWR Toplight Mainline City BR Maroon Composite 7911 S6

GWR Toplight Mainline City BR Maroon Composite 7911 S6 The Dapol OO Gauge GWR Toplight Mainline City coaches  have the following features and details:  Highly accurate injection moulded body with bolection window mouldings and frosted Toplight windows. Separate metal door and commode handles Wire end hand rails and separately applied end communication details Correct number of roof ventilators depending on the prototypical period being modelled Highly detailed chassis with vacuum tanks, battery boxes and brake linkages all to a high degree of fidelity 9ft bogie bolster with dicast side frames and split axles for electrical pick up Highly detailed interior with period specific decorations being applied Technical Specification:  Kinematic couplings with NEM pockets including special coupling bar to give close coupling Coaches are capable of negotiating R2 radius curves Sprung metal buffers Heavy Diecast chassis Internal lighting. Can be optionally DCC fitted with a six pin decoder such as the Dapol Imperium 5. - OO Scale

Dapol HIA Hopper (Early Build) Freightliner White 369025 (OO)

HIA Hopper (Early Build) Freightliner White 369025 The HIA limestone hopper was designed for the haulage of limestone, stone and sand and was introduced in 2005 for exclusive operation by Freightliner Heavy Haul Limited. 122 HIA limestone hoppers were manufactured by Wagony Swidinica in Poland. The HIA limestone hopper was 14 metres long with a maximum carrying capacity of 90 tonnes. The wagons worked all over England, typically transporting limestone from Derbyshire (Dowlow) to Yorkshire, Kent, Cambridgeshire, Norfolk and Lancashire.  Features: Finely applied livery with accurately printed detail  Highly level of detail Profiled wheels for exceptionally smooth running NEM pockets with self-centring couplings    - OO Scale

EFE Rail LSWR Adams T3 560 SR Lined Maunsell Green

LSWR Adams T3 560 SR Lined Maunsell Green The first LSWR T3 Class locomotive was built in 1892 and 125 years later, the T3 was thrown into the spotlight when the National Railway Museum donated the sole preserved example, No. 563, to the Swanage Railway Trust. Ever since this controversial move there has been a desire to see a OO scale model of this Victorian masterpiece, and now, we are delighted to fulfil those wishes with this brand-new model developed for Bachmann’s EFE Rail range. Employing a large number of diecast metal components to provide the optimal weight distribution needed for this 4-4-0 locomotive to perform at its best, the EFE Rail T3 is powered by a five pole motor and flywheel which is geared to the rear driving axle. DCC provision comes in the form of a Next18 decoder socket mounted in the tender, where a speaker is also fitted, meanwhile within the cab of the model a firebox lighting system has been installed which operates on both analogue and DCC. An innovative loco-to-tender coupling design provides both integral electrical connections and a close coupling feature, whilst at either end of the model NEM coupling pockets are fitted and sprung metal buffers are mounted on each bufferbeam. Each model sports an array of locomotive- and era-specific detailing as appropriate, all of which is highlighted by the ornate livery application. Details on this Model: Pristine SR Lined Maunsell Green livery Running No. 560 Etched Numberplates* Adams Boiler Drummond Chimney Adams Smokebox Door Rivetted Smokebox Saddle Traditional Suspension Fluted Coupling Rods Rear Bogie Wheel Splashers* Single Whistle Welded Lamp Irons SR Disc Head Signals* Tender Coal Rails *supplied separately for optional fitting Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 228mm (over couplings) Five pole motor with flywheel mounted in the locomotive, driving the rear set of driving wheels Electrical pickup from all driving wheels and tender wheels Separate metal bearings fitted to each driving wheel axle and each bogie wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis fitted to both the locomotive and tender Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Discreet snap-together locomotive to tender drawbar with integral close coupling mechanism and electrical connections Sprung front bogie Front bogie features a clip-in front section with optional blank filler or coupling adapter with integral coupling pocket to NEM362 standards Tender features a close coupling mechanism which is fitted with a coupling pocket to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Firebox lighting with twin LEDs operating on DC and DCC Textured filter in the firebox hole to simulate a burning coal fire Twin speakers installed in the tender of all models for optimum sound reproduction - Era 3 - OO Scale

Rapido UK LNER J52/2 '68817' British Railways Black

LNER J52/2 '68817' British Railways Black Features: No.68817 BRITISH RAILWAYS black Cast tapered chimney Pop-type safety valves Short dome Tapered buffers Plate-type front step 3 handrail knobs Closed bunker coal rails Smokebox numberplate Can motor Flywheel Plunger pickups Sprung buffers Detailed cab interior Firebox glow Factory-fitted speaker Optional scale couplings Diecast chassis block Next18 decoder socket - OO Scale

Rapido UK LNER J52/2 '68832' BR Plain Black (Early Emblem)

LNER J52/2 '68832' BR Plain Black (Early Emblem) Features: No.68832 BR black (early crest) Stovepipe chimney Pop-type safety valves Short dome Parallel buffers Pole-type front step 3 handrail knobs Closed bunker coal rails Smokebox numberplate Can motor Flywheel Plunger pickups Sprung buffers Detailed cab interior Firebox glow Factory-fitted speaker Optional scale couplings Diecast chassis block Next18 decoder socket - OO Scale  

Rapido UK LNER J52/2 '68846' BR Lined Black (Late Emblem) (Sound Fitted)

LNER J52/2 '68846' BR Lined Black (Late Emblem) (Sound Fitted) Features: No.68846 BR lined black (late crest) Cast tapered chimney Pop-type safety valves Short dome Parallel buffers Pole-type front step 4 handrail knobs Closed bunker coal rails Smokebox numberplate Can motor Flywheel Plunger pickups Sprung buffers Detailed cab interior Firebox glow Factory-fitted speaker Optional scale couplings Diecast chassis block Next18 decoder socket - OO Scale

Rapido UK LNER J52/2 '2' BR Plain Black (Early Emblem) (Departmental)

LNER J52/2 '2' BR Plain Black (Early Emblem) (Departmental) Features: No.2 BR black (departmental) Cast tapered chimney Pop-type safety valves Tall dome Parallel buffers Plate-type front step 3 handrail knobs Closed bunker coal rails Smokebox numberplate Can motor Flywheel Plunger pickups Sprung buffers Detailed cab interior Firebox glow Factory-fitted speaker Optional scale couplings Diecast chassis block Next18 decoder socket - OO Scale

Rapido UK LNER J52/2 '4217' LNER Plain Black (Sound Fitted)

LNER J52/2 '4217' LNER Plain Black (Sound Fitted) Features: No.4217 LNER black (shaded lettering) Cast tapered chimney Pop-type safety valves Tall dome Tapered buffers Plate-type front step 3 handrail knobs Closed bunker coal rails Can motor Flywheel Plunger pickups Sprung buffers Detailed cab interior Firebox glow Factory-fitted speaker Optional scale couplings Diecast chassis block Next18 decoder socket - OO Scale

Rapido UK LNER J52/2 '4226' LNER Lined Black

LNER J52/2 '4226' LNER Lined Black Features: No.4226 LNER lined black Cast tapered chimney Ramsbottom-type safety valves Tall dome Tapered buffers Pole-type front step 3 handrail knobs Open bunker coal rails Can motor Flywheel Plunger pickups Sprung buffers Detailed cab interior Firebox glow Factory-fitted speaker Optional scale couplings Diecast chassis block Next18 decoder socket - OO Scale

Bachmann LMS 20T Brake Van LMS (L M S) Grey '730037' (OO)

LMS 20T Brake Van LMS (L M S) Grey '730037' This new Bachmann Branchline model of the LMS Standard 20 Ton Brake Van sets a new standard for these iconic vehicles, of which 2,774 examples were built between 1935 and 1950, first by the London, Midland and Scottish Railway (LMS) and then by British Railways (BR) who recognised the merits of the LMS design. With an extensive tooling suite catering for many of the variations that were incorporated into the real vans during their construction and subsequent use, authentic models can be produced of brake vans in their early years when first entering traffic in the 1930s, to their final days in departmental use at the end of the twentieth century. Boasting a wealth of detail, from the separately fitted metal handrails to the individual brake components and cabin interior, the new Branchline models are fitted with blackened metal wheelsets and NEM coupling pockets, providing smooth running and operational versatility alongside their good looks. The icing on the cake is the livery application, with rich paintwork and authentic numbering and markings, completing this valuable addition to the extensive range of Branchline goods rolling stock. Features: Pristine LMS Grey (L M S) livery Running No. 730037 Model depicts a Diagram D1919 van with: Through Vacuum Pipes Shallow Guard Duckets Narrow Ducket Beading Rivetted End Panels Extended Buffers Shallow Ballast Weights Accessory Pack NEM Coupling Pockets Length 118mm (over couplings) - Era 3 - OO Scale

Bachmann LMS 20T Brake Van LMS Grey '730203' (OO)

LMS 20T Brake Van LMS Grey '730203' This new Bachmann Branchline model of the LMS Standard 20 Ton Brake Van sets a new standard for these iconic vehicles, of which 2,774 examples were built between 1935 and 1950, first by the London, Midland and Scottish Railway (LMS) and then by British Railways (BR) who recognised the merits of the LMS design. With an extensive tooling suite catering for many of the variations that were incorporated into the real vans during their construction and subsequent use, authentic models can be produced of brake vans in their early years when first entering traffic in the 1930s, to their final days in departmental use at the end of the twentieth century. Boasting a wealth of detail, from the separately fitted metal handrails to the individual brake components and cabin interior, the new Branchline models are fitted with blackened metal wheelsets and NEM coupling pockets, providing smooth running and operational versatility alongside their good looks. The icing on the cake is the livery application, with rich paintwork and authentic numbering and markings, completing this valuable addition to the extensive range of Branchline goods rolling stock. Features: Pristine LMS Grey (LMS) livery Running No. 730203 Model depicts a Diagram D1919 van with: Through Vacuum Pipes Shallow Guard Duckets Narrow Ducket Beading Rivetted End Panels Extended Buffers Shallow Ballast Weights Accessory Pack NEM Coupling Pockets Length 118mm (over couplings) - Era 3 - OO Scale

Bachmann BR Mk2F TSO Anglia '6148' (OO)

BR Mk2F TSO Anglia '6148' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine Anglia livery Running No. 6148 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F TSO Anglia '6148' (OO) (DCC)

BR Mk2F TSO Anglia '6148' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 6148 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets Door Interlock Lights (when used on DCC, the lights on each side are controlled independently of each other) DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F FO Anglia '3336' (OO)

BR Mk2F FO Anglia '3336' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine Anglia livery Running No. 3336 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F FO Anglia '3336' (OO) (DCC)

BR Mk2F FO Anglia '3336' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 3336 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F FO BR Blue & Grey (Inter-City) 'M3430' (OO)

BR Mk2F FO BR Blue & Grey (Inter-City) 'M3430' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. M3430 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F FO BR InterCity (Swallow) '3414' (OO)

BR Mk2F FO BR InterCity (Swallow) '3414' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity Swallow livery Running No. 3414 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Bachmann BR Mk2F FO BR InterCity (Swallow) '3414' (OO) (DCC)

BR Mk2F FO BR InterCity (Swallow) '3414' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine BR InterCity Swallow livery Running No. 3414 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Bachmann BR Mk2F RFB Anglia '1218' (OO)

BR Mk2F RFB Anglia '1218' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine Anglia livery Running No. 1218 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F RFB Anglia '1218' (OO) (DCC)

BR Mk2F RFB Anglia '1218' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 1218 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets Door Interlock Lights (when used on DCC, the lights on each side are controlled independently of each other) DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F TSO Anglia '5921' (OO)

BR Mk2F TSO Anglia '5921' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine Anglia livery Running No. 5921 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F TSO Anglia '5921' (OO) (DCC)

BR Mk2F TSO Anglia '5921' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 5921 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets Door Interlock Lights (when used on DCC, the lights on each side are controlled independently of each other) DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F DBSO BR Blue & Grey (Inter-City) 'SC9703' (OO) (DCC)

BR Mk2F DBSO BR Blue & Grey (Inter-City) 'SC9703' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. The DBSOs were used in Scotland to work push-pull services, usually with a Class 47/7 locomotive at the other end that had been specially modified to allow push-pull operations. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F DBSO in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panel is completed with metal wire grab handles. The inner end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the inner end, including the ETH socket and cabling, along with pipework and dummy knuckle couplings. It's the cab that makes the DBSO instantly recognisable amongst the Mk2 fleet and here, every detail has been considered, from the glazed cab windows with their separate window wiper to the corridor gangway with its optional cover. Again, a full set of bufferbeam pipework and accessories is included, along with the obstacle deflector, a characteristic feature of the DBSOs when viewed front-on. The light clusters complete the front end and working lights are fitted as standard. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief along with additional details like the speedometers found on the DBSOs. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, guard’s compartment and luggage area, complete with the caging which enclosed it. The livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC four separate lighting features can be enjoyed with individual control of the interior, Guard’s compartment and cab lights, plus the directional lights which display red or white according to the direction of travel. When used on analogue control, the interior lights and directional lights will work when power is applied. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. SC9703 Directional Lighting Interior Lighting DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F DBSO BR ScotRail '9709' (OO) (DCC)

BR Mk2F DBSO BR ScotRail '9709' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. The DBSOs were used in Scotland to work push-pull services, usually with a Class 47/7 locomotive at the other end that had been specially modified to allow push-pull operations. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F DBSO in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panel is completed with metal wire grab handles. The inner end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the inner end, including the ETH socket and cabling, along with pipework and dummy knuckle couplings. It's the cab that makes the DBSO instantly recognisable amongst the Mk2 fleet and here, every detail has been considered, from the glazed cab windows with their separate window wiper to the corridor gangway with its optional cover. Again, a full set of bufferbeam pipework and accessories is included, along with the obstacle deflector, a characteristic feature of the DBSOs when viewed front-on. The light clusters complete the front end and working lights are fitted as standard. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief along with additional details like the speedometers found on the DBSOs. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, guard’s compartment and luggage area, complete with the caging which enclosed it. The livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC four separate lighting features can be enjoyed with individual control of the interior, Guard’s compartment and cab lights, plus the directional lights which display red or white according to the direction of travel. When used on analogue control, the interior lights and directional lights will work when power is applied. Features: Pristine BR ScotRail livery Running No. 9709 Directional Lighting Interior Lighting DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Bachmann BR Mk2F BSO BR Blue & Grey (Inter-City) 'M9516' (OO)

BR Mk2F BSO BR Blue & Grey (Inter-City) 'M9516' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. M9516 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F BSO BR InterCity (Swallow) '9513' (OO)

BR Mk2F BSO BR InterCity (Swallow) '9513' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity Swallow livery Running No. 9513 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Hornby SR, Merchant Navy 21C1 'Channel Packet' (TXS Steam Generator)

SR, Merchant Navy 21C1 'Channel Packet' (TXS Steam Generator) Locomotive 21C1 'Channel Packet' was the first of the Merchant Navy class, entering service in 1941 at Salisbury and then Exmouth Junction from 1942. Renumbered '35001' under British Railways in 1948, 'Channel Packet' was allocated to Stewarts Lane from 1957 until rebuilding in 1959. This model features DCC sound and steam functionality to recreate the first of Bulleid’s powerful and iconic Merchant Navy locomotives.  Detail features:  High detail OO gauge model based on extensive research and original works drawings  High detail cab with fully decorated backhead and decorated instrument dials  Opening cab roof vent  Removable simulated coal load with fully detailed tender bunker Accurately modelled Merchant Navy Bullied-Firth-Brown wheels Early 21C1 'widows peak' front end streamlining and chimney arrangement 5000 gallon tender in its original condition with raves yet to be cut back Cast trailing truck Separately fitted nameplate, number plate and company ownership plate Horseshoe smokebox door company plate  Sprung metal buffers Heavy die-cast chassis, pony truck and trailing truck  Electronics & traction features:  Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element)  Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers and HM7000 app control  Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect Adjustable steam output settings via the decoder  Water reservoir for up to 20 minutes of continuous steam running Die-cast connecting rods and valve gear  Powerful 5-pole skew-wound motor  Flywheel with cardan shaft arrangement for smooth running  Oilite main drive bearings  Wheel pickups on tender & driven locomotive wheelsets  Pogo pin wheel pickup arrangement for easy pickup servicing  8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling Front and rear NEM coupling pockets, with narrow tension lock couplings  Optional fit rear flanged wheelset (only recommended for larger layouts with sweeping curves or display purposes)  Please note: This model requires a DCC controller or the HM7000 app to control.  - OO Scale

Accurascale HTV Hopper BR Bauxite - Pack K

HTV Hopper BR Bauxite - Pack K Features: Minimum Radius 438mm (2nd Radius Set-track) Weight 35g minimum Die-cast chassis for ideal weight RP25-110 profile OO gauge wheels with separate brake blocks in line with tread Sprung metal buffers and dummy instanter couplings Super fine plastic parts, incl. brake gear, lamp irons, handrails, hopper door operating equipment, etc. Removable, Kinetic NEM coupler mounts at correct height with mini-tension-lock couplers provided with scale Instanters included 2mm diameter axles that are 26mm over pinpoints - OO Scale

Bachmann SR Bulleid SO 15" Vents BR (SR) Green 'S1472S' (OO)

SR Bulleid Second Open 15" Vents BR (SR) Green The Diagram 2017 Third Open is the next model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. The majority of these vehicles were built by British Railways following Nationalisation and most were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey, meaning you can either add one or more to any existing train or use these to kickstart a new rake of coaches! Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR (SR) Green livery Running No. S1472S 15” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Mk1-pattern Battery Boxes, Mounted Offset Mk1-pattern Dynamo Long Footboards Long Roof Tank - Era 5 - OO Scale

Bachmann SR Bulleid SO 15" Vents BR (SR) Green 'S1496S' (OO)

SR Bulleid Second Open 15" Vents BR (SR) Green The Diagram 2017 Third Open is the next model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. The majority of these vehicles were built by British Railways following Nationalisation and most were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey, meaning you can either add one or more to any existing train or use these to kickstart a new rake of coaches! Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR (SR) Green livery Running No. S1496S 15” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Mk1-pattern Battery Boxes, Mounted Offset Mk1-pattern Dynamo Long Footboards Long Roof Tank - Era 5 - OO Scale

Bachmann SR Bulleid SO 15" Vents BR Maroon 'E1469S' (OO)

SR Bulleid Second Open 15" Vents BR Maroon The Diagram 2017 Third Open is the next model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. The majority of these vehicles were built by British Railways following Nationalisation and most were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey, meaning you can either add one or more to any existing train or use these to kickstart a new rake of coaches! Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR Maroon livery Running No. E1469S 15” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Mk1-pattern Battery Boxes, Mounted Offset Mk1-pattern Dynamo Long Footboards Long Roof Tank - Era 5 - OO Scale

Bachmann SR Bulleid SO 15" Vents BR Maroon 'Sc1500S' (OO)

SR Bulleid Second Open 15" Vents BR Maroon The Diagram 2017 Third Open is the next model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. The majority of these vehicles were built by British Railways following Nationalisation and most were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey, meaning you can either add one or more to any existing train or use these to kickstart a new rake of coaches! Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR Maroon livery Running No. Sc1500S 15” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Mk1-pattern Battery Boxes, Mounted Offset Mk1-pattern Dynamo Long Footboards Long Roof Tank - Era 5 - OO Scale

Bachmann SR Bulleid TO 15" Vents BR Crimson & Cream 'S1478' (OO)

SR Bulleid Third Open 15" Vents BR Crimson & Cream The Diagram 2017 Third Open is the next model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. The majority of these vehicles were built by British Railways following Nationalisation and most were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey, meaning you can either add one or more to any existing train or use these to kickstart a new rake of coaches! Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR Crimson & Cream livery Running No. S1478 15” Window Ventilators Smooth Bodysides Single Vacuum Brake Cylinder Mk1-pattern Battery Boxes, Mounted Offset Mk1-pattern Dynamo Long Footboards Long Roof Tank - Era 4 - OO Scale

Bachmann SR Bullied CC 10'' Vents BR (SR) Green 'S5762S' (OO)

SR Bullied Composite Corridor 10'' Vents BR (SR) Green Modellers of the BR Southern Region can look forward to forming an authentic Bulleid 3-coach set thanks in part to this new model of the Diagram 2318 Composite Corridor, which was one of three Bulleid coaches that made up ‘L Set’ No. 781. The Southern Railway had a long tradition of forming much of its coaching stock into semi-permanent sets and set No. 781 was formed in March 1947 when the three vehicles entered traffic; they would remain in this formation until the set was disbanded in 1967. Combine this model with 34-726A and 34-726B to create the authentic 3-coach set, and why not add some of our ‘loose’ coaches like the Brake Composite Corridor (34-761/A) and Second Open (34-826/A) to expand your fleet even further and provide extra capacity for busy services! The highly acclaimed Bachmann Branchline models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR (SR) Green livery Running No. S5762S 10” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Mk1-pattern Battery Boxes, Mounted Offset Mk1-pattern Dynamo Long Footboards Short Roof Tank - Era 5 - OO Scale

Bachmann SR Bulleid BCC 10" Vents BR (Ex-SR) Malachite Green 'S6736' (OO)

SR Bulleid Brake Comp. Corridor 10" Vents BR (Ex-SR) Malachite Green The much-requested Diagram 2406 Brake Composite Corridor is the latest model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. Built by British Railways in the months following Nationalisation, these BCKs were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey. The Atlantic Coast Express is a prime example of the latter, whereby as many as six BCKs heading for alternative destinations might be coupled to the main set upon departure from London Waterloo, and then progressively removed during the journey to then be hauled as part of a local or branch service, or simply as a single coach, to their final destination. Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR (Ex-SR) Malachite Green livery Running No. S6736 10” Window Ventilators Smooth Bodysides Single Vacuum Brake Cylinder Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 4 - OO Scale

Bachmann SR Bulleid BCC 10" Vents BR (SR) Green 'S6733S' (OO)

SR Bulleid Brake Composite Corridor 10" Vents BR (SR) Green The much-requested Diagram 2406 Brake Composite Corridor is the latest model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. Built by British Railways in the months following Nationalisation, these BCKs were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey. The Atlantic Coast Express is a prime example of the latter, whereby as many as six BCKs heading for alternative destinations might be coupled to the main set upon departure from London Waterloo, and then progressively removed during the journey to then be hauled as part of a local or branch service, or simply as a single coach, to their final destination. Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR (SR) Green livery Running No. S6733S 10” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 5 - OO Scale

Bachmann SR Bulleid BCC 10" Vents BR (SR) Green 'S6739S' (OO)

SR Bulleid Brake Composite Corridor 10" Vents BR (SR) Green The much-requested Diagram 2406 Brake Composite Corridor is the latest model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. Built by British Railways in the months following Nationalisation, these BCKs were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey. The Atlantic Coast Express is a prime example of the latter, whereby as many as six BCKs heading for alternative destinations might be coupled to the main set upon departure from London Waterloo, and then progressively removed during the journey to then be hauled as part of a local or branch service, or simply as a single coach, to their final destination. Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR (SR) Green livery Running No. S6739S 10” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 5 - OO Scale

Bachmann SR Bulleid BCC 10" Vents BR Crimson & Cream 'S6735' (OO)

SR Bulleid Brake Composite Corridor 10" Vents BR Crimson & Cream The much-requested Diagram 2406 Brake Composite Corridor is the latest model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. Built by British Railways in the months following Nationalisation, these BCKs were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey. The Atlantic Coast Express is a prime example of the latter, whereby as many as six BCKs heading for alternative destinations might be coupled to the main set upon departure from London Waterloo, and then progressively removed during the journey to then be hauled as part of a local or branch service, or simply as a single coach, to their final destination. Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR Crimson & Cream livery Running No. S6735 10” Window Ventilators Smooth Bodysides Single Vacuum Brake Cylinder Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 4 - OO Scale

Bachmann SR Bulleid BCC 10" Vents BR Maroon 'W6715W' (OO)

SR Bulleid Brake Composite Corridor 10" Vents BR Maroon The much-requested Diagram 2406 Brake Composite Corridor is the latest model to join the highly acclaimed Bachmann Branchline range of Bulleid Coaches. Built by British Railways in the months following Nationalisation, these BCKs were used as ‘loose’ coaches to strengthen services at peak times or were included in trains from which they would be detached part way through a journey. The Atlantic Coast Express is a prime example of the latter, whereby as many as six BCKs heading for alternative destinations might be coupled to the main set upon departure from London Waterloo, and then progressively removed during the journey to then be hauled as part of a local or branch service, or simply as a single coach, to their final destination. Produced to the same high level of detail and fidelity as the current Bullied Coaches from Bachmann Branchline, these new models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR Maroon livery Running No. W6715W 10” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 5 - OO Scale

Bachmann SR Bulleid BS Semi-Open 10'' Vents BR (SR) Green 'S4323S' (OO)

SR Bulleid Brake Second Semi-Open 10'' Vents BR (SR) Green Modellers of the BR Southern Region can look forward to forming an authentic Bulleid 3-coach set thanks in part to this new model of the Diagram 2123 Brake Second Semi-Open, which was one of three Bulleid coaches that made up ‘L Set’ No. 781. The Southern Railway had a long tradition of forming much of its coaching stock into semi-permanent sets and set No. 781 was formed in March 1947 when the three vehicles entered traffic; they would remain in this formation until the set was disbanded in 1967. The model accurately includes set No. 781 on the coach end and can be combined with 34-726B and 34-752 to create the authentic 3-coach set, and why not add some of our ‘loose’ coaches like the Brake Composite Corridor (34-761/A) and Second Open (34-826/A) to expand your fleet even further and provide extra capacity for busy services! The highly acclaimed Bachmann Branchline models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR (SR) Green livery Running No. S4323S 10” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards 4-piece Bogie Steps at the Brake end Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 5 - OO Scale

Bachmann SR Bulleid BS Semi-Open 10'' Vents BR (SR) Green 'S4324S' (OO)

SR Bulleid Brake Second Semi-Open 10'' Vents BR (SR) Green Modellers of the BR Southern Region can look forward to forming an authentic Bulleid 3-coach set thanks in part to this new model of the Diagram 2123 Brake Second Semi-Open, which was one of three Bulleid coaches that made up ‘L Set’ No. 781. The Southern Railway had a long tradition of forming much of its coaching stock into semi-permanent sets and set No. 781 was formed in March 1947 when the three vehicles entered traffic; they would remain in this formation until the set was disbanded in 1967. The model accurately includes set No. 781 on the coach end and can be combined with 34-726B and 34-752 to create the authentic 3-coach set, and why not add some of our ‘loose’ coaches like the Brake Composite Corridor (34-761/A) and Second Open (34-826/A) to expand your fleet even further and provide extra capacity for busy services! The highly acclaimed Bachmann Branchline models capture every element of Bulleid’s modernistic design to a tee. Every model incorporates a wealth of detail including separately fitted components such as roof vents, lamp irons, toilet filler & overflow pipework and the portrayal of a complete vacuum pipe-run between the sockets at each end of the vehicles. The bogies incorporate electrical pickups, brake details and footsteps as appropriate whilst authentic interiors are also included along with full underframe gear. Features: Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) Details on this Model: Pristine BR (SR) Green livery Running No. S4324S 10” Window Ventilators Strengthening Ribs on the Bodysides Twin Vacuum Brakes Cylinders Bullied-pattern Battery Boxes, Mounted Offset Bulleid-pattern Dynamo Long Footboards 4-piece Bogie Steps at the Brake end Single, Long Guard’s Door Handrail Twin Luggage Door Handrails Short Roof Tank - Era 5 - OO Scale