Accurascale BR Mk2C FK M13520 Blue/Grey InterCity (OO)

BR Mk2C FK M13520 Blue/Grey InterCity (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C FK M13527 Provincial Trans-Pennine (OO)

BR Mk2C FK M13527 Provincial Trans-Pennine (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5505 Regional Railways (OO)

BR Mk2C TSO 5505 Regional Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5520 Provincial (Unbranded) (OO)

BR Mk2C TSO 5520 Provincial (Unbranded) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5525 Network SouthEast (OO)

BR Mk2C TSO 5525 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO 5569 Maroon (South Wales & West) (OO)

BR Mk2C TSO 5569 Maroon (South Wales & West) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO M5561 Blue/Grey InterCity (OO)

BR Mk2C TSO M5561 Blue/Grey InterCity (OO)Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) 6501 Network SouthEast (OO)

BR Mk2C TSO(T) 6501 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO)

BR Mk2C TSO(T) SC6518 Blue/Grey Scotrail (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C FK 13514 Network SouthEast (OO)

BR Mk2C FK 13514 Network SouthEast (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BFK 17120 Network SouthEast w/ WoE Route Branding (OO)

BR Mk2C BFK 17120 Network SouthEast w/ WoE Route Branding (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BFK IC17177C InterCity Executive (OO)

BR Mk2C BFK IC17177C InterCity Executive (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSK (exBFK) 35506 Regional Railways (OO)

BR Mk2C BSK (exBFK) 35506 Regional Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSK (exBFK) 35508 West Coast Railways (OO)

BR Mk2C BSK (exBFK) 35508 West Coast Railways (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2C BSO 9440 South Wales & West Blue (OO)

BR Mk2C BSO 9440 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5453 South Wales & West Blue (OO)

BR Mk2B TSO 5453 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5463 Maroon (South Wales & West) (OO)

BR Mk2B TSO 5463 Maroon (South Wales & West) (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Accurascale BR Mk2B TSO 5491 South Wales & West Blue (OO)

BR Mk2B TSO 5491 South Wales & West Blue (OO) Highly-detailed OO Gauge / 1:76.2 Scale Models on 16.5mm track Extremely fine exterior rivet detail on roof and coach ends Separately-applied etched metal and high-fidelity plastic parts, including handrails, brake/steam heat pipes, ETH cabling and sockets, footsteps, dummy drophead knuckle coupler, and roof vents Prism Free Glazing Pre-painted etched metal water filler covers provided for customer to install Fully-detailed underframe with numerous separate parts, pipe runs and accurate differences between versions The most accurate B4 bogies ever produced, with provision for re-gauging to EM or P4 (18.83mm) gauges Blackened RP25.110 profile wheel-sets with 14.4mm back-to-back measurements, and 26mm over pinpoints Different buffers for retracted and non-retracted positions Accurate interiors with characteristic 'winged' headrests, separate metal interior handrails on the brake and corridor vehicles and fully-detailed guard's compartment Correct height NEM standard coupling sockets with mini tension lock couplers and kinematic close-coupling Easy conversion to Kadee-compatiable knuckle couplers Full lighting package, including magnet 'wand' controlled interior lighting 'Stay-Alive' capacitor in all coaches directional lighting with DC or DCC control (Driving Trailer only) Minimum Radius 438mm (2nd Radius Set-track) Coach Length: 269mm

Scenecraft Street Lamps (x4) (OO)

Street Lamps (x4) Scenecraft helps you create any scene or diorama with buildings, structures and accessories that are fully finished and ready to place on your layout. No street scene is complete without street lights so once you have arranged your buildings – whether full buildings or low relief – add these Street Lamps to provide light to your miniature inhabitants on those dark nights (*lamps do not illuminate). MODEL FEATURES: Highly detailed, hand painted model Fully decorated and ready to place on your layout Pack of 4 - OO scale

Hornby RailRoad: Peppercorn A1 60163 'Tornado' BR Lined Apple Green

RailRoad: Peppercorn A1 60163 'Tornado' BR Lined Apple Green Peppercorn A1 60163 ‘Tornado’, a true icon of the current railway scene, rejoins the RailRoad range in a new livery scheme: Apple Green with British Railway tender lettering. Designed to be robust this RailRoad model features fully working piston and connecting rods, accurate paint application and DCC capability. Model Specification: RailRoad specification Peppercorn A1 Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: 21-pin DCC decoder socket compatible with HM7000 system Livery: British Railways lined apple green Modern warning flashes - OO Scale  

Hornby RailRoad: Peppercorn A1 60163 ‘Tornado’ BR Apple Green (Sound)

RailRoad: Peppercorn A1 60163 ‘Tornado’ BR Lined Apple Green (Sound Fitted) Peppercorn A1 60163 ‘Tornado’, a true icon of the current railway scene, rejoins the RailRoad range in a new livery scheme: Apple Green with British Railway tender lettering. Designed to be robust this RailRoad model features fully working piston and connecting rods, accurate paint application and DCC capability. Model Specification: RailRoad specification Peppercorn A1 Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius DCC Sound: Pre fitted 21-pin DCC Sound decoder, compatible with HMRA compliant systems and HM7000 High fidelity sound profile assembled from recordings of 60163 Tornado Livery: British Railways lined apple green Modern warning flashes - OO Scale  

Hornby Robert Stephenson’s L&MR ‘Planet’

Robert Stephenson’s L&MR ‘Planet’ Building on the success of our other Era 1 steam locomotives, ‘Planet’ is an impeccable replication of the historic Stephenson design, utilising high quality diecast and plastic mouldings to capture the distinctive shape of the locomotive. Initially available in its preserved condition, this wonderful model will be a great addition to any model railway collection. Model Specification: High detail model of replica L&MR Planet locomotive based on extensive research Diecast locomotive chassis and tender body Coreless motor All-wheel pick up High detail cab backhead Decorated crew figures Separate buffers Numerous separately fitted parts such as steam pipes, control levers, strengthening truss rods, and handrails Accessory Bag Minimum 2nd radius Electronics: Next18 DCC decoder socket compatible with HM7000 system Livery: As preserved in the Manchester Science Museum Wood grain printing on boiler Gold plated dome and boiler details - OO Scale

Hornby RailRoad: GWR County 1023 'County of Oxford' GW Lined Green

RailRoad: GWR County 1023 'County of Oxford' GW Lined Green The ‘County’ Class was the last of the GWR-designed two-cylinder 4-6-0s, with 30 built at Swindon between 1945 and 1947 to the design of Chief Mechanical Engineer, Frederick Hawksworth. This latest RailRoad County Class model depicts No. 1023 ‘County of Oxford’ in Great Western lined green. Model specification: RailRoad specification model of County Class Moulded details Working running gear NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: 21-pin DCC Decoder socket compatible with HM7000 Livery: Great Western lined green with GW tender crest Accurate colours and font - OO Scale

Hornby RailRoad: Fowler 3F Jinty 16440 LMS Lined Crimson

RailRoad: Fowler 3F Jinty 16440 LMS Lined Crimson Wearing the vibrant lined crimson livery of the LMS, this RailRoad Fowler 3F Jinty numbered 16440 in preservation condition is perfect for all your shunting needs, regardless of the setting! This 0-6-0 tank locomotive has working running gear and a neatly applied paint scheme. Model Specification: RailRoad specification LMS 3F Jinty Moulded details Working connector rods NEM coupling sockets Accessory Pack Minimum 2nd Radius Electronics: Analogue Livery: LMS lined crimson as preserved Accurate colours and fonts - OO Scale

Hornby Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke)

Merchant Navy 35028 'Clan Line' BR Green (Early) (Sound/Smoke) This highly detailed model represents famed 'Spam Can' No.35028 ‘Clan Line’ in British Railways lined green livery with early cycling lion emblem on the tender. A must-have model for Southern Region collectors, this feature-packed locomotive is pre-fitted with HM7000 control, for the most satisfying model railway experience yet. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis, pony truck and trailing truck Die-cast connecting rods and valve gear High detail cab and fully decorated backhead with decorated instrument dials Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels 8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible DCC Sound: Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of Merchant Navy locomotives Tender speaker Livery: BR Lined Green with ‘Cycling Lion’ early emblem on tender Clan Line etched nameplates Semi-gloss finish Accurate colours and fonts - OO Scale

Hornby LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke)

LNER A4 60002 ‘Sir Murrough Wilson' BR Green (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60002 ‘Sir Murrough Wilson’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights. This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any early British Railways model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Non-Corridor Tender Side valence removed Livery: BR Lined Green Named ‘Sir Murrough Wilson’ Cycling Lion on tender Accurate colours and fonts - OO Scale

Hornby LNER A4 60024 'Kingfisher' BR Exp. Ultramarine (Sound/Smoke)

LNER A4 60024 'Kingfisher' BR Experimental Ultramarine (Sound/Smoke) The famous LNER A4 pacific, known for its streamlined casing, returns to the range as No. 60024 ‘Kingfisher’ fitted with steam generator and DCC Sound functionality, as well as working lights and tender lights.  This gorgeous Gresley locomotive is highly detailed, featuring a great number of intricate separate parts, and would make for a standout addition to any LNER model railway collection. Please Note: This model requires a DCC controller or the HM7000 App to control. Model Specification: High detail OO gauge model based on extensive research and original works drawings Die-cast chassis and boiler Die-cast connecting rods and valve gear High detail cab and fully decorated back head with decorated instrument dials Decorated crew figures Turned brass safety valves Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels Quick release locomotive to tender connector Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Working lights  Working Tender Lights Accessory bag contains tablet catcher, vacuum pipes, lamps and couplings Minimum 2nd Radius curves Steam Generator: Pre-fitted Gen 2 steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element). Water reservoir large enough for 20 minutes of continuous steam running Adjustable steam output settings via the decoder Electronics: Pre-fitted 21-Pin HM7000 decoder and speaker. Compatible with NMRA DCC controllers and HM7000 system HM7000 Power Bank compatible Flickering firebox DCC Sound: Pre-installed LNER A4 sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect. Assembled using live recordings of LNER A4 locomotives Tender speaker Tooling: Smokebox door numberplate Single Chimney Corridor Tender Side valence removed Livery: BR Express Blue Named ‘Kingfisher’ British Railways lettering on tender Accurate colours and fonts - OO Scale

Hornby Dublo: Merchant Navy 35019 'French Line CGT' BR Express Blue

Dublo: Merchant Navy 35019 'French Line CGT' BR Express Blue A further addition to the highly collectable Hornby Dublo range comes in the form of Merchant Navy No. 35019 ‘French Line CGT’, in the vibrant express blue colour scheme of early British Railways. Moulded out of diecast, this high-fidelity model of a classic Bulleid ‘Spam Can’ is the ideal locomotive for collectors of Southern Region stock and Dublo Diecast models. Model Specification: High detail OO gauge model based on extensive research and original works drawings Fully moulded in Diecast Diecast connecting rods and valve gear Accessory ‘RF’ Headboard High detail cab and fully decorated backhead with decorated instrument dials Large number of separately fitted parts Separately fitted simulated coal load with fully detailed tender bunker Powerful 5 pole skew wound motor Electrical pickups on main drive wheels and tender wheels 8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling. Pogo pin wheel pickup arrangement for easy pickup servicing Brass main drive bearings Sprung metal buffers Front and rear NEM coupling pocket Accessory bag Minimum 2nd Radius curves Electronics: 21-Pin HM7000 decoder socket compatible with HM7000 system HM7000 Power Bank compatible Livery: BR Lined Express Blue with ‘Cycling Lion’ early emblem on tender French Line CGT etched nameplates Semi-gloss finish Accurate colours and fonts - OO Scale

Hornby A1X 'Terrier' 643 LB&SCR Marsh Brown

A1X 'Terrier' 643 LB&SCR Marsh Brown The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.643 in London Brighton & South Coast Railway Marsh Brown. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Flush smokebox door Four lamp brackets on front and rear Low bufferstock with no lamp brackets Steam pipes Small cab bunker with no coal rails Westinghouse pump Livery: LB&SCR Marsh Brown Accurate colours and typefaces - OO Scale

Hornby A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company

A1X 'Terrier' 72 'Fenchurch' Newhaven Harbour Company The famous LB&SCR A1/A1X 0-6-0 Terrier is back for the 2026 range launch, utilising the highly accurate OO Gauge tooling suite that expertly captures the charming characteristics of the southern steam engine. It has been designed for smooth and reliable operation, including the provision for digital command control via a 6-pin decoder socket. This particular example depicts No.72 ‘Fenchurch’ in Newhaven Harbour Company lined black. Model Specification: Expertly moulded die-cast body and chassis for added realism and weight Number of separately fitted parts, including smokebox door, water filler caps, handrails, lamp irons and buffers Brass connector rods with metal securing pins Detailed cab interior with painted instrument dials Pivoting NEM sockets for improved coupling around tight curves Precision-engineered coreless motor for smooth running All-wheel pick-ups Accessory pack Minimum 2nd radius Electronics: 6-Pin DCC Decoder socket compatible with HM7000 system Tooling: Stroudley chimney Rivetted smokebox door Six lamp brackets on front and rear  Low bufferstock with lamp brackets Steam pipes removed Small cab bunker with no coal rails Westinghouse pump Livery: Newhaven Harbour Company lined black Accurate colours and typefaces - OO Scale

Hornby Playtrains: Signal Box

Playtrains: Signal Box Add another layer of imagination to their railway adventures with this signal box, created especially for Hornby Playtrains. An ideal structure for bringing your child’s train set to life, this classic signal box gives every journey a sense of purpose and storytelling.  Children aged 5–8 will love imagining the railway controller inside, deciding when trains can depart, when they must stop, changing the points and keeping everything running smoothly. Made from robust plastic and supplied in a simple kit form, it’s easy to assemble and designed to stand up to enthusiastic everyday play.  The realistic colours add an authentic touch to their Playtrains railway play set-up, helping to create a miniature railway world that feels both fun and believable. Fully compatible with all Hornby Playtrains toys, it’s a simple way to expand their set, encourage creative role play and keep their railway adventures on track.  

Accurascale Class 50 50035 'Ark Royal' BR Blue (SF)

Class 50 50035 'Ark Royal' BR Blue (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof

Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof (SF)

Class 50 50046 'Ajax' BR Blue Large Logo w/ Grey Roof (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50029 'Renown' Revised NSE w/WofE Branding

Class 50 50029 'Renown' Revised NSE w/WofE Branding Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50029 'Renown' Revised NSE w/WofE Branding (SF)

Class 50 50029 'Renown' Revised NSE w/WofE Branding (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50035 'Ark Royal' BR Blue

Class 50 50035 'Ark Royal' BR Blue Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50019 'Ramillies' BR Laira Departmental Blue

Class 50 50019 'Ramillies' BR Laira Departmental Blue Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Accurascale Class 50 50019 'Ramillies' BR Laira Departmental Blue (SF)

Class 50 50019 'Ramillies' BR Laira Departmental Blue (Sound Fitted) Features: Highly-detailed OO scale model, 1:76 scale Minimum Radius 438mm (2nd Radius Set-track) in OO Die-cast metal chassis RP25-110 profile OO wheels with provision for re-gauging with scale-sized wheels for P4/EM gauges – with simple ride height adjustment – and ability to set brake blocks in line with wheels Separately-applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Etched metal pre-painted nameplates and crests (where applicable) provided for customer to install Interchangeable printed headcodes with full description covering the first nine years of the class plus preservation era Scale-sized and mounted snowploughs provided for customer to install, with one-piece NEM mounted option Full underframe tank, battery box and full-formed compressor detail with extensive pipework and other separate parts Fully sprung metal buffers and bufferplate, factory-fitted pipework and screw couplings (for display) Fully sprung buffers, super-fine pipework and screw couplings (for display) Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers Five-Pole motor with two flywheels Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a realistic scale speed All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Switchable Red and white marker lights with correctly configured lights for preservation era oddballs 50008 and 50044 Interior lighting with cast electrical compartment and engine bay detail on metal motor enclosure Separately switched cab lighting and illuminated, driver’s desk, auto/off on movement 21-Pin DCC ready with PowerPack capacitor for uninterrupted power Separately powered working radiator fan with different speed settings  PowerPack capacitor for uninterrupted power Custom ‘Accurathrash’  Speaker Technology including large ‘Accurathrash’ Style Bass Speaker (on DCC Sound-fitted models only)  Hall sensor for flange squeal effect (on DCC Sound-fitted models only)

Hornby BR Class 43 HST 43128 & 43135 Scotrail Inter7City (Sound Fitted)

BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack (Sound Fitted) The Class 43 HST Power Cars have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce this special commemorative train pack in OO Gauge, depicting 43128 and 43135 in ScotRail ‘InterCity 7’ livery, which are still in service as part of the last HST fleet in passenger operation in the UK. Based on the refreshed tooling suite and featuring working directional and cab lights, working roof fans, 5-pole motor with twin flywheels in the motorised car, diecast chassis and numerous separately fitted parts, this train pack is a must-have for collectors and fans of this classic British design. This train pack is DCC Sound Fitted with a sound decoder in both power cars. Features: Twin pack of highly detailed Class 43 models Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab handrails, underframe equipment and roof exhaust shroud Detailed cab interior 5-pole motor with twin flywheels in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Working directional and cab headlights Working roof fans 21-Pin sound decoder fitted in both power cars Speaker in both power cars Space for HM7070 Power Bank for uninterrupted running Utilises high-fidelity HM7000 sound file created using live recordings of Class 43 locomotives. - OO Scale

Hornby BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack

BR Class 43 HST 43128 & 43135 Scotrail Inter7City Train Pack The Class 43 HST Power Cars have been a mainstay of the Hornby OO and TT:120 ranges for many years and we are delighted to announce this special commemorative train pack in OO Gauge, depicting 43128 and 43135 in ScotRail ‘InterCity 7’ livery, which are still in service as part of the last HST fleet in passenger operation in the UK. Based on the refreshed tooling suite and featuring working directional and cab lights, working roof fans, 5-pole motor with twin flywheels in the motorised car, die-cast chassis and numerous separately fitted parts, this train pack is a must-have for collectors and fans of this classic British design. Features: Twin pack of highly detailed Class 43 models Motorised Power Car and Unmotorised Dummy Car Die-cast chassis Separately fitted parts including cab handrails, underframe equipment and roof exhaust shroud Detailed cab interior 5-pole motor with twin flywheels in motorised car capable of pulling full-length HST rakes Electrical pick-ups on both motorised/unmotorised bogies Pivoting NEM coupling sockets Accessory pack Minimum 2nd radius curves Working directional and cab headlights Working roof fans DCC Ready with 21-Pin decoder socket in motorised/dummy cars compatible with HM7000 system Space for HM7000-21TXS Sound Decoder to be fitted Space for HM7070 Power Bank for uninterrupted running Some light functions will only operate to their fullest capability on DCC - OO Scale 

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem)

GCR 9J (J11) 64305 BR Black (Early Emblem) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted)

GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J 295 GCR Lined Black (Sound Fitted)

GCR 9J 295 GCR Lined Black (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The 9Js carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme with its ornate three-colour lining is reproduced to exquisite effect, with a rich and consistent finish throughout. The Great Central lettering and company crest on the tender is the icing on the cake, comprising no fewer than six separate colours and replicated using precision printing techniques for full authenticity. The Branchline 9J runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine Great Central Railway Lined Black livery Running No. 295 Smooth Smokebox Door with original Handwheel Top Front Lamp Iron mounted above the Smokebox Door Robinson Tapered Chimney Draught Retarder Original Tall Dome Ramsbottom Safety Valves Parallel Buffer Shanks with End Collars Central Rib on Cab Roof Tender fitted with Water Pick-Up Gear Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Hornby LNER 'West Riding Limited' Double Open First Pack

LNER 'West Riding Limited' Double Open First Pack Following the success of the LNER’s newly-introduced ‘Coronation’ trains in 1935, a new train was introduced to operate between London King’s Cross and Leeds and Bradford in 1937. A new set of carriages was built that was identical to the ‘Coronation’ with four twin articulated coaches, though not the streamlined beavertail observation car, named the ‘West Riding Limited’. Carriages were in pairs, sharing a bogie between the two, thus reducing friction and improving ride quality. The train first ran on 27th September 1937 and achieved an average speed of 63.3mph (101.9km/h) between King’s Cross and Bradford. It was hauled by Gresley's ‘A4’ No. 4492 ‘Dominion of New Zealand’, which had emerged from Doncaster Works only three months earlier. Services were suspended for the duration of the Second World War, but were reinstated in 1949. A modern version of the train is still operated by the present-day LNER with a 6.30am departure from Bradford Forster Square station. The next vehicles in the rake are coaches ‘C’ and ‘D’ and these comprise of two identical first class open coaches which offered enhanced comfort and also had a lavatory at each end. Those coaches are the ones presented in this highly detailed OO gauge coach pack. - OO Scale

Hornby LNER 'West Riding Limited' Open Third & Brake Third Pack

LNER 'West Riding Limited' Open Third & Brake Third Pack Following the success of the LNER’s newly-introduced ‘Coronation’ trains in 1935, a new train was introduced to operate between London King’s Cross and Leeds and Bradford in 1937. A new set of carriages was built that was identical to the ‘Coronation’ with four twin articulated coaches, though not the streamlined beavertail observation car, named the ‘West Riding Limited’. Carriages were in pairs, sharing a bogie between the two, thus reducing friction and improving ride quality. The train first ran on 27th September 1937 and achieved an average speed of 63.3mph (101.9km/h) between King’s Cross and Bradford. It was hauled by Gresley's ‘A4’ No. 4492 ‘Dominion of New Zealand’, which had emerged from Doncaster Works only three months earlier. Services were suspended for the duration of the Second World War, but were reinstated in 1949. A modern version of the train is still operated by the present-day LNER with a 6.30am departure from Bradford Forster Square station. The final pair are made up of an open third class coach with lavatory, plus another third class brake coach with alternative accommodation for the train’s guard, and those are the highly detailed OO gauge model coaches shown in this pack. - OO Scale

Hornby LNER 'West Riding Limited' Open Third & Kitchen Third Pack

LNER 'West Riding Limited' Open Third & Kitchen Third Pack Following the success of the LNER’s newly-introduced ‘Coronation’ trains in 1935, a new train was introduced to operate between London King’s Cross, Leeds and Bradford in 1937. A new set of carriages was built that was identical to the ‘Coronation’ with four twin articulated coaches, though not the streamlined beavertail observation car, and was named the ‘West Riding Limited’. Carriages were in pairs, sharing a bogie between the two, thus reducing friction and improving ride quality. The train first ran on 27th September 1937 and achieved an average speed of 63.3mph (101.9km/h) between King’s Cross and Bradford. It was hauled by Gresley's ‘A4’ No. 4492 ‘Dominion of New Zealand’, which had emerged from Doncaster Works only three months earlier. Services were suspended for the duration of the Second World War, but were reinstated in 1949. A modern version of the train is still operated by the present-day LNER with a 6.30am departure from Bradford Forster Square station. Vehicles ‘E’ and ‘F’ include a Third Class Open Coach and a another coach with third class seating and a second kitchen area. These highly detailed OO gauge LNER coaches are excellent replicas of the 'West Riding Limited' carriages.  - OO Scale

Metcalfe OO Roofing Tiles (OO)

Roofing Tiles  A mixed variety of card builder sheets printed in different roof styles. Printed onto 0.5mm thick card. Printed area on each sheet varies with a minimum size of 165mm x 225mm Multipack contains: Blue Slate Tiles x 2 Grey Slate Tiles x 1 Red Clay Pantiles x 2 Red Clay Tiles x 2 York Stone Tiles x 2 - OO Scale

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight (SFD)

Class 66/8 66847 'Terry Baker' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SF)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (SFD)

Class 66/8 66850 'David Maidment OBE' Colas Rail Freight (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66850 Named ‘David Maidment OBE’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SF)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association' GBRf (SFD)

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66761 'Wensleydale Railway Association'GBRf Europorte

Class 66/7 66761 'Wensleydale Railway Association' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66761 Named ‘Wensleydale Railway Association’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte

Class 66/7 66777 'Annette' GBRf Europorte The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted Deluxe)

Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted)

Class 66/7 66777 'Annette' GBRf Europorte (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine GBRf ‘Europorte’ livery Running No. 66777 Named ‘Annette’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof and Modern Communication Pod Fitted 2 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Wrap-Around Control Panels Revised Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/8 66847 'Terry Baker' Colas Rail Freight

Class 66/8 66847 'Terry Baker' Colas Rail Freight The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Colas Rail Freight livery Running No. 66847 Named ‘Terry Baker’ Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original ‘Bug-Eye’ Light Clusters (2-Lamps, Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted)

Class 66/3 66304 DRS Plain Blue (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SF)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted)  The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SFD)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/5 66501 Freightliner 60 1965-2025 Orange

Class 66/5 66501 Freightliner 60 1965-2025 Orange  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Orange livery Running No. 66501 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Widely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/5 66501 Freightliner 60 1965-2025 Orange (SFD)

Class 66/5 66501 Freightliner 60 1965-2025 Orange (Sound Fitted Deluxe) The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Orange livery Running No. 66501 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Widely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/5 66501 Freightliner 60 1965-2025 Orange (Sound Fitted)

Class 66/5 66501 Freightliner 60 1965-2025 Orange (Sound Fitted)  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Orange livery Running No. 66501 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Widely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/5 66515 Freightliner Racing Green (Sound Fitted Deluxe)

Class 66/5 66515 Freightliner Racing Green (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Freightliner Green livery Running No. 66515 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/6 66601 Freightliner 60 1965-2025 Green

Class 66/6 66601 Freightliner 60 1965-2025 Green  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Green livery Running No. 66601 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/6 66601 Freightliner 60 1965-2025 Green (SFD)

Class 66/6 66601 Freightliner 60 1965-2025 Green (Sound Fitted Deluxe)  The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Green livery Running No. 66601 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/6 66601 Freightliner 60 1965-2025 Green (Sound Fitted)

Class 66/6 66601 Freightliner 60 1965-2025 Green (Sound Fitted) The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. Details: Pristine Freightliner 60 1965-2025 Freightliner Green livery Running No. 66601 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Revised LED Light Clusters (2-Lamps, Small Light Boxes) Small Top Light Box with LED Light Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod Removed from Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 66/6 66606 Freightliner Racing Green (Sound Fitted Deluxe)

Class 66/6 66606 Freightliner Racing Green (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine Freightliner Green livery Running No. 66606 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66096 EWS

Class 66/0 66096 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66096 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue

Class 66/3 66304 DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe)

Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/0 66015 EWS

Class 66/0 66015 EWS The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine EWS livery Running No. 66015 Original 4-Door Locomotive 3-Piece Cab Side Windows with Separate Quarterlights Original WIPAC Light Clusters (3-Lamps) Small Top Light Box Standard UK Pattern Buffers Combination Drawgear with Buckeye Couplings Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 2 Securing Lugs at each End Cab Front Handrails with 5 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Angled Sandpipe Brackets Smooth Bogie Lifeguards Cab Front Steps Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted)

LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black

LMS 8F with Riveted Tender 8233 LMS Black The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted Deluxe)

LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted)

LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (SF)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (SFD)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest) (SF)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest) (SFD)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W]

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (SF)

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (SFD)

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black

LMS 8F with Riveted Tender 8036 LMS Black The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted Deluxe)

LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Scale Model Scenery Pearce's Machine Shop – Laser-cut kit (OO)

Pearce's Machine Shop – Laser-cut kit A versatile workshop / machine shop building suitable for industrial, mining, farm or railway use. The design is typical of many buildings of this type that can still be seen all over the British Isles, with stone walls, slate roof & brick chimney. The walls are finished in our popular old stone texture, enabling it to fit in with any location or railway region but the kit also comes complete with a set of weathered red brick wraps should you prefer a brick finish. The kit is supplied with laser-cut parts for ease of assembly and comes with fully weathered paper wraps and roof slates, with no additional painting or weathering required for a "Realistically Better" finish straight from the pack.The windows & doors are supplied laser-cut from our eco-friendly laserboard and are packed with detail. Doors & window frames require painting before the kit is assembled which can be done with solvent or acrylic based paints. We used a Plastikote Stone colour for our test build which we then dry-brushed with burnt umber, white & slate grey artists acrylics to create a weathered wood look. There's also plenty of scope for customisation too... with the slates being applied in individual strips it's easy to build it in either pristine or derelict condition (or anywhere in between) . There's lots of detail on both door types including engraved planks, hinges and locks. The traditional casement style windows can be glazed with the kit packaging if desired. There's also the opportunity to build the kit without the chimney and with a choice of arched or square doors so you can easily customise it to suit your needs. Step-by-step instructions are included giving great results for modellers of all ages and abilities. Fully compatible with all model railway brands & buildings. Dimensions: L: 108mm x W: 63mm x H: 66mm - OO Scale

Scenecraft Newsagent Platform Kiosk - Blue 'WHSmith'

Newsagent Platform Kiosk - Blue Any station worth stopping at should provide passengers with somewhere to grab a good read and refreshments for the journey ahead, and whilst some locations offered a shop within the station building complex, many relied on standalone kiosks to provide the latest news and light snacks and drinks. If you want to give your miniature passengers the same amenities, then look no further than this Scenecraft model to do the job! Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - OO Scale

Scenecraft Newsagent Platform Kiosk - Orange & Brown 'WHSmith'

Newsagent Platform Kiosk - Orange & Brown Any station worth stopping at should provide passengers with somewhere to grab a good read and refreshments for the journey ahead, and whilst some locations offered a shop within the station building complex, many relied on standalone kiosks to provide the latest news and light snacks and drinks. If you want to give your miniature passengers the same amenities, then look no further than this Scenecraft model to do the job! Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout - OO Scale

Bachmann BR Mk2F TSO Anglia '6148' (OO)

BR Mk2F TSO Anglia '6148' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine Anglia livery Running No. 6148 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F TSO Anglia '6148' (OO) (DCC)

BR Mk2F TSO Anglia '6148' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 6148 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets Door Interlock Lights (when used on DCC, the lights on each side are controlled independently of each other) DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F FO Anglia '3336' (OO)

BR Mk2F FO Anglia '3336' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine Anglia livery Running No. 3336 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F FO Anglia '3336' (OO) (DCC)

BR Mk2F FO Anglia '3336' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 3336 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F FO BR Blue & Grey (Inter-City) 'M3430' (OO)

BR Mk2F FO BR Blue & Grey (Inter-City) 'M3430' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. M3430 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F FO BR InterCity (Swallow) '3414' (OO)

BR Mk2F FO BR InterCity (Swallow) '3414' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity Swallow livery Running No. 3414 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Bachmann BR Mk2F FO BR InterCity (Swallow) '3414' (OO) (DCC)

BR Mk2F FO BR InterCity (Swallow) '3414' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine BR InterCity Swallow livery Running No. 3414 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Bachmann BR Mk2F RFB Anglia '1218' (OO)

BR Mk2F RFB Anglia '1218' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine Anglia livery Running No. 1218 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F RFB Anglia '1218' (OO) (DCC)

BR Mk2F RFB Anglia '1218' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 1218 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets Door Interlock Lights (when used on DCC, the lights on each side are controlled independently of each other) DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F TSO Anglia '5921' (OO)

BR Mk2F TSO Anglia '5921' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine Anglia livery Running No. 5921 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F TSO Anglia '5921' (OO) (DCC)

BR Mk2F TSO Anglia '5921' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC up to five lighting features can be enjoyed namely the passenger saloon lighting, guard’s compartment lights (where applicable), Door interlock lights (where applicable and each side of the coach is controlled separately) and the tail light which can be set to flash or be constantly on or off – both battery and oil lamps are provided along with a lamp bracket ‘blank’ allowing full customisation of the tail lamp feature to suit any scenario. When used on analogue control, interior lights and the tail lamps will work when power is applied – the latter being switchable between flashing, constant on or off using the switch mounted within the chassis of the model. Features: Pristine Anglia livery Running No. 5921 Interior Lighting Working Tail Lights – Switchable between Flashing/On/Off and with interchangeable lamps/brackets Door Interlock Lights (when used on DCC, the lights on each side are controlled independently of each other) DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 9 - OO Scale

Bachmann BR Mk2F DBSO BR Blue & Grey (Inter-City) 'SC9703' (OO) (DCC)

BR Mk2F DBSO BR Blue & Grey (Inter-City) 'SC9703' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. The DBSOs were used in Scotland to work push-pull services, usually with a Class 47/7 locomotive at the other end that had been specially modified to allow push-pull operations. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F DBSO in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panel is completed with metal wire grab handles. The inner end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the inner end, including the ETH socket and cabling, along with pipework and dummy knuckle couplings. It's the cab that makes the DBSO instantly recognisable amongst the Mk2 fleet and here, every detail has been considered, from the glazed cab windows with their separate window wiper to the corridor gangway with its optional cover. Again, a full set of bufferbeam pipework and accessories is included, along with the obstacle deflector, a characteristic feature of the DBSOs when viewed front-on. The light clusters complete the front end and working lights are fitted as standard. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief along with additional details like the speedometers found on the DBSOs. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, guard’s compartment and luggage area, complete with the caging which enclosed it. The livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC four separate lighting features can be enjoyed with individual control of the interior, Guard’s compartment and cab lights, plus the directional lights which display red or white according to the direction of travel. When used on analogue control, the interior lights and directional lights will work when power is applied. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. SC9703 Directional Lighting Interior Lighting DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F DBSO BR ScotRail '9709' (OO) (DCC)

BR Mk2F DBSO BR ScotRail '9709' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. The DBSOs were used in Scotland to work push-pull services, usually with a Class 47/7 locomotive at the other end that had been specially modified to allow push-pull operations. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F DBSO in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panel is completed with metal wire grab handles. The inner end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the inner end, including the ETH socket and cabling, along with pipework and dummy knuckle couplings. It's the cab that makes the DBSO instantly recognisable amongst the Mk2 fleet and here, every detail has been considered, from the glazed cab windows with their separate window wiper to the corridor gangway with its optional cover. Again, a full set of bufferbeam pipework and accessories is included, along with the obstacle deflector, a characteristic feature of the DBSOs when viewed front-on. The light clusters complete the front end and working lights are fitted as standard. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief along with additional details like the speedometers found on the DBSOs. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, guard’s compartment and luggage area, complete with the caging which enclosed it. The livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC four separate lighting features can be enjoyed with individual control of the interior, Guard’s compartment and cab lights, plus the directional lights which display red or white according to the direction of travel. When used on analogue control, the interior lights and directional lights will work when power is applied. Features: Pristine BR ScotRail livery Running No. 9709 Directional Lighting Interior Lighting DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Bachmann BR Mk2F BSO BR Blue & Grey (Inter-City) 'M9516' (OO)

BR Mk2F BSO BR Blue & Grey (Inter-City) 'M9516' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. M9516 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F BSO BR InterCity (Swallow) '9513' (OO)

BR Mk2F BSO BR InterCity (Swallow) '9513' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR InterCity Swallow livery Running No. 9513 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 8 - OO Scale

Accurascale HTV Hopper BR Bauxite - Pack K

HTV Hopper BR Bauxite - Pack K Features: Minimum Radius 438mm (2nd Radius Set-track) Weight 35g minimum Die-cast chassis for ideal weight RP25-110 profile OO gauge wheels with separate brake blocks in line with tread Sprung metal buffers and dummy instanter couplings Super fine plastic parts, incl. brake gear, lamp irons, handrails, hopper door operating equipment, etc. Removable, Kinetic NEM coupler mounts at correct height with mini-tension-lock couplers provided with scale Instanters included 2mm diameter axles that are 26mm over pinpoints - OO Scale

Bachmann LNWR 50ft Arc Roof TC M&GN Brown '81040'

LNWR 50ft Arc Roof Third Corridor M&GN Brown Features: Pristine M&GN Brown livery Running No. 81040 Steel Wheels Gas Lighting – with Roof-mounted Gas Lights and Gas Pipes Gas Cylinders Vacuum Brakes Two-Piece Lavatory Windows Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 223mm (over couplings) - Era 3 - OO Scale

Bachmann LNWR 50ft Arc Roof CC LMS Crimson Lake '4415'

LNWR 50ft Arc Roof Composite Corridor LMS Crimson Lake Features: Pristine LMS Crimson Lake livery Running No. 4415 Steel Wheels Electric Lighting – Roof-mounted Gas Lights and Gas Pipes Removed Battery Boxes Vacuum Brakes Two-Piece Lavatory Windows Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 223mm (over couplings) - Era 3 - OO Scale

Bachmann LNWR 50ft Arc Roof TC LMS Crimson Lake '2326'

LNWR 50ft Arc Roof Third Corridor LMS Crimson Lake Features: Pristine LMS Crimson Lake livery Running No. 2326 Steel Wheels Electric Lighting – Roof-mounted Gas Lights and Gas Pipes Removed Battery Boxes Vacuum Brakes One-Piece Lavatory Windows Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 223mm (over couplings) - Era 3 - OO Scale

Hornby RailRoad: BR Class 55, 55002 'KOYLI' BR Green (Sound Fitted)

RailRoad: BR Class 55, 55002 'KOYLI' BR Green (Sound Fitted) This RailRoad Class 55 ‘Deltic’ diesel was built for high-speed express trains making it the perfect diesel for pulling a rake of coaches. It comes DCC-ready with a Next 18-pin plug, meaning it can be upgraded to run on DCC and with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive. The production ‘Deltics’ were a powerful Type 5 locomotive, designed for high-speed express passenger services on the East Coast Main Line. When introduced in 1961, these were the most powerful diesel locomotives in the world. Powered by two big Napier diesel engines, these locomotives – later known as Class 55s – were capable of speeds of up to 117mph (188km/h) and all were given names in the best tradition of East Coast express locomotives. Known affectionately as ‘KOYLI’ by enthusiasts, 55002 is finished in a two-tone green livery, reminiscent of the early 1960s, but with full yellow ends and the classic white cab window surrounds. - DCC Sound Fitted (HM7000 Decoder) - OO Scale

Hornby Freight Runner Train Set

Freight Runner Train Set A train set is the perfect way to start building a model railway of your own, whether for the fun of driving trains or as the beginning of a detailed scenic railway layout, a Hornby train set has all you need to build a simple working model railway.  This freight-themed train set includes a motorised B4 tank engine that is quick and strong at pulling the three wagons also included. It comes with a simple oval of track that is easy to set up, a mains power supply and a controller, so no batteries are required.  This train set is compatible with other Hornby products, so you can add more track, buildings and many more train options, taking you on an adventure in creating your own miniature railway world with guaranteed creativity and hours of fun along the way. - This Set is Analogue Only  - OO scale

Hornby LMS, 'Salmon' Bogie Wagon - Era 3

LMS, 'Salmon' Bogie Wagon - Era 3 Includes: - Detailed wagon body - LMS bauxite Livery - Sprung buffers - NEM coupling pockets  - Tension lock couplings - Will traverse minimum 2nd radius curves (R606 / R607) - Era 3 - OO Scale

Hornby Class 60 60008 'Gypsum Queen II' Loadhaul - (DCC Sound Fitted)

Class 60 60008 'Gypsum Queen II' Loadhaul - (DCC Sound Fitted) Includes: - Detailed body and cabs - Etch Nameplates - Working directional lights - Metal sprung buffers - NEM couplings and pockets - 5 Pole Skew wound motor - Accessory bag includes buffer beam hoses and parts - DCC Sound Fitted HM7000 (NOTE: This model and sound functions can ONLY be operated with the HM7000 App via bluetooth or a DCC digital controller) - Model will traverse minimum of 2nd radius curves (R606/R607) - OO Scale

Hornby SR, 'H' Class 0-4-4T 1552 - Era 3

SR, 'H' Class 0-4-4T 1552 - Era 3 Includes: - Southern Railway unlined black livery - SR 'Sunshine' lettering style - Detailed body and cab interior - Sprung buffers - Accessory bag - NEM couplings and pockets - 5 pole Motor - 8 PIN DCC Socket NOTE: This model is compatible for the Hornby HM7000 TXS decoders. Requires Hornby HM7000 App or suitable DCC Digital controller to operate - Will traverse minimum of 2nd radius curves (R606/R607) - OO Scale

Hornby LNER, Thompson Class A2/3, 4-6-2, 511 'Airborne'

LNER, Thompson Class A2/3, 4-6-2, 511 'Airborne' Includes: - Highly detailed bodywork - LNER Doncaster / Apple lined Green Livery - Post War Plain Gill Sans numbers and Letter - Cab interior detailing - Accessory bag includes steam cocks and flanged wheelset - NEM Couplings and pockets - 5 Pole Motor - 8 PIN DCC ready socket NOTE: This is compatible with Hornby HM7000 TXS Sound Decoders. Will require the HM7000 App or suitable DCC controller to operate functions. - Will traverse minimum 2nd radius curves (R606 and R607) - Length: 295mm - OO scale

Hornby LNER, Class J52, 0-6-0ST 4225 - Era 3

LNER, Class J52, 0-6-0ST 4225 - Era 3 Includes: - Body and cab detailing - LNER plain black livery - Gill Sans Gold and red/black shadowed lettering/numbers - Sprung buffers - Accessory bag - NEM couplings and pockets - 5 pole skewed wound motor - 21 PIN DCC Ready socket NOTE: this model is compatible with the Hornby HM7000 TXS Decoders. This requires the Hornby HM7000 App or suitable DCC controller - Will traverse 2nd radius curves minimum (R606 /R607) - OO Scale

Hornby BR, Thompson Class A2/2, 4-6-2, 60502 'Earl Marischal'

BR, Thompson Class A2/2, 4-6-2, 60502 'Earl Marischal' Includes: - Highly detailed bodywork - British Railway express Green lined livery - BR late crest  - Accessory bag includes steam cocks and flanged wheelset - NEM Couplings and pockets - 8 PIN DCC ready socket NOTE: This is compatible with Hornby HM7000 TXS Sound Decoders. Will require the HM7000 App or suitable DCC controller to operate functions. - Will traverse minimum 2nd radius curves (R606 and R607) - OO scale

Hornby BR, Merchant Navy Class, 4-6-2, 35012 'United States Lines'

BR, Merchant Navy Class, 4-6-2, 35012 'United States Lines'  Includes: - SR 'Post War' Malachite lined Green Livery - British Railways style number font - Detailed body work - Fully detailed cab interior  - Accessory bag - 5 pole Motor and brass flywheel - NEM couplings and pockets - 21 PIN DCC Socket NOTE: this locomotive is suitable for Hornby HM7000 TXS decoders. Requires the Hornby HM7000 app or suitable DCC digital controller to operate. - Will traverse minimum 2nd radius (R606/ R607) - OO Scale 

Hornby BR, H Class 0-4-4T 31177 - Era 4

BR, H Class 0-4-4T 31177 - Era 4  Includes: - British Railways Lined Black livery - BR early crest - Detailed body and cab interior - Sprung buffers - Accessory bag - NEM couplings and pockets - 5 pole Motor - 8 PIN DCC Socket - Will traverse minimum of 2nd radius curves (R606/R607) - OO Scale

Hornby BR (Early), Class J52, 0-6-0ST 68873 - Era 4

BR (Early), Class J52, 0-6-0ST 68873 - Era 4 Includes: - Body and cab detailing - British Railways plain black livery - Sprung buffers - Accessory bag - NEM couplings and pockets - 5 pole skewed wound motor - 21 PIN DCC Ready socket NOTE: this model is compatible with the Hornby HM7000 TXS Decoders. This requires the Hornby HM7000 App or suitable DCC controller - Will traverse 2nd radius curves minimum (R606 /R607) - OO Scale

Hornby Dublo: BR, English Electric DP1, Co-Co, DP1 'Deltic'

Hornby Dublo: BR, English Electric DP1, Co-Co, DP1 'Deltic'  Includes: - Detailed diecast body - BR Prototype Blue and Cream livery - Cab interior detailing - Distinctive Nose chevrons and Headlight - Sprung buffers - 5 Pole Motor - NEM couplings and pockets - 21 PIN DCC Socket NOTE: This is compatible with the HM7000TXS decoder. This will require the Hornby HM7000 App or suitable Digital Controller to operate - Era 4 - Will traverse minimum of 2nd radius curves (R606, R607)  - OO Scale

Accurascale Class 37 37903 BR Railfreight Grey Large Logo

Class 37 37903 BR Railfreight Grey Large Logo Features: Provided DCC ready [21Pin MTX Socket] Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound as well as independently controlled, smooth coreless motorised fan. Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights Heavy die-cast metal chassis High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam - OO Scale

Accurascale Class 37 37903 BR Railfreight Grey Large Logo - DCC Sound

Class 37 37903 BR Railfreight Grey Large Logo - DCC Sound Features: Provided Factory DCC Sound Fitted [ESU LokSound 5] ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound as well as independently controlled, smooth coreless motorised fan. Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights Heavy die-cast metal chassis High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam - OO Scale

Accurascale Class 37 37902 'British Steel Llanwern' Triple Grey Metals

Class 37 37902 'British Steel Llanwern' Triple Grey Metals Sector Features: Provided DCC ready [21Pin MTX Socket] Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound as well as independently controlled, smooth coreless motorised fan. Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights Heavy die-cast metal chassis High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam - OO Scale

Bachmann MR 1532 (1P) Tank 58040 BR Lined Black (BR) - DCC Sound Fitted

MR 1532 (1P) Tank 58040 BR Lined Black (British Railways) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black ‘British Railways’ Livery Running No. 58040 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 58051 BR Lined Black (E/E) - DCC Sound Fitted

MR 1532 (1P) Tank 58051 BR Lined Black (Early Emblem) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black Early Emblem Livery Running No. 58051 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 58056 BR Lined Black (E/E) - DCC Sound Fitted

MR 1532 (1P) Tank 58056 BR Lined Black (Early Emblem) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black Early Emblem Livery Running No. 58056 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 1295 LMS Black - DCC Sound Fitted

MR 1532 (1P) Tank 1295 LMS Black - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine LMS Black Livery Running No. 1295 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 4-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with MR/LMS Style Numberplate Low Smokebox Door Handrail Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. The LMS embarked on a programme to replace the 1P’s original round-top boilers with Belpaire boilers and No. 1370 is one such locomotive to have undergone this treatment. A miniature marvel, the Branchline model is packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 3 - OO Scale

Bachmann MR 1532 (1P) Tank 1370 LMS Black - DCC Sound Fitted

MR 1532 (1P) Tank 1370 LMS Black - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine LMS Black Livery Running No. 1370 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 4-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with MR/LMS Style Numberplate Low Smokebox Door Handrail Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. The LMS embarked on a programme to replace the 1P’s original round-top boilers with Belpaire boilers and No. 1370 is one such locomotive to have undergone this treatment. A miniature marvel, the Branchline model is packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 3 - OO Scale

Hornby Class 153 FGW No.153361 - Era 10

Class 153 FGW No.153361 Includes: - Detailed body and chassis - Interior detail - Interior lighting - DCC Ready 21 Pin Decoder Socket - Era 10 - OO scale

Accurascale Hunslet Austerity VF5300 NCB North East 59

Hunslet Austerity VF5300 NCB North East 59 This Austerity was another wartime product, this time from the Vulcan foundry, Newton-le-Willows. It was completed in 1945 and allocated the WD number 75310. Following war dept service, the locomotive was purchased by the NCB and allocated to number 6 area, North West Durham. Particular to this area is the cut back cabs on all locomotives for working the restricted clearance of the tunnel on the entrance to Lambton coal drops at the port of Sunderland. Another smaller feature on this locomotive was the relocation of the injectors to above the running plate ahead of the cab. Both of these features are faithfully recreated on the model Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Accurascale Hunslet Austerity WGB2762 United Steel Company 18

Hunslet Austerity WGB2762 United Steel Company 18 This attractively liveried Austerity was built in 1945 by W. G. Bagnall in Stafford and was one of the 377 locomotives built for the War Department and originally carried the number 75174. When demobbed, the locomotives was purchased by the United Steel Companies and put to work on the steelworks system at Scunthorpe. Externally a virtually standard Austerity, our model carries the heavy duty “Yorkshire” buffers that were fitted to the prototype when it was in service. Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Accurascale Hunslet Austerity HC1775 BR Black Early Emblem 68025

Hunslet Austerity HC1775 BR Black Early Emblem 68025 This locomotive was one of a batch of 36 Austerities by Hudswell Clarke of Leeds. This particular one was completed in November 1944 and carried the WD number 71498. Purchased by the LNER in June 1946 the locomotive was classified as a J94 and numbered 8025. The distinctive extended bunker was fitted in November 1949 when it was renumbered 68025 and gained the early BR emblem. The locomotive was based at Darlington 51A until withdrawal in 1963. The locomotive did not survive and was cut up shortly after. The model replicates the period after 1949 and carries the extended bunker, smokebox numberplate and additional steps and handrails on the tank Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Accurascale Hunslet Austerity HC1775 BR Black Early Emblem 68025 - DCC Sound

Hunslet Austerity HC1775 BR Black Early Emblem 68025 - DCC Sound This locomotive was one of a batch of 36 Austerities by Hudswell Clarke of Leeds. This particular one was completed in November 1944 and carried the WD number 71498. Purchased by the LNER in June 1946 the locomotive was classified as a J94 and numbered 8025. The distinctive extended bunker was fitted in November 1949 when it was renumbered 68025 and gained the early BR emblem. The locomotive was based at Darlington 51A until withdrawal in 1963. The locomotive did not survive and was cut up shortly after. The model replicates the period after 1949 and carries the extended bunker, smokebox numberplate and additional steps and handrails on the tank Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Hornby BR, YMO 'Salmon' Bogie Bolster Wagon - Era 7

BR, YMO 'Salmon' Bogie Bolster Wagon The Hornby Salmon range is a new tooling for 2023 with almost all variants of the wagon catered for. Fitted with diecast chassis, these wagons have fantastic weight that rolls freely on metal wheels. Bolsters are included in the accessory Includes: - Detailed wagon body - BR black Livery - Sprung buffers - NEM coupling pockets  - Tension lock couplings - Will traverse minimum 2nd radius curves (R606 / R607) - Era 7 - OO Scale

Accurascale GWR 8750, 8763 BR Early Emblem Lined Black - DCC Sound

GWR 8750, 8763 BR Early Emblem Lined Black - DCC Sound Features: Highly detailed 0-6-0PT 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, buffer pipework, lamp irons etc. Turned brass whistles etched whistle shields (where fitted) Sliding roof ventilator Etched metal pre-painted number plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door Flickering Firebox Installed Stay Alive Power Pack Fitted - OO Scale

Accurascale Class 66 66302 Fastline - DCC Sound

Class 66 66302 Fastline - DCC Sound 66302 arrived in the uk as part of a “mixed delivery” of class 66 low emission models, alongside locos for Freightliner and DRS aboard the MV Stellanova on the 8th November 2006. Following unloading and acceptance it worked its first train of HYA’s on the 13th November. When Jarvis went in to administration, Fastline’s small fleet of class 66 locomotives were acquired by DRS before being repainted into their house colours Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 37 37429 'Eisteddfod Genedlaethol' BR Large Logo

Class 37 37429 'Eisteddfod Genedlaethol' BR Large Logo Representing the original Cardiff Canton batch of six Class 37/4 conversions is No. 37429, ‘refurbished’ by Crewe Works from No. 37300 (originally D6600) in March 1986. Nos. 37426-37431 were originally planned to join the rest of the sub class on the Scottish Region. However, before they were completed the London Midland identified a more pressing need for this batch, although they were allocated to Canton in South Wales due to this depot’s extensive knowledge of the English Electric Type 3s. The introduction of Electric Train Heat (ETH) fitted locomotives to the restricted weight Cambrian route from Wolverhampton to the Welsh coast allowed InterCity to supplement its tired Mk.1 fleet on London Euston to Aberystwyth and Pwllheli services with air-conditioned Mk.2 coaches, although Mk.1s – often Network SouthEast liveried sets – were still regulars on the summer-dated trains into the 1990s. Unlike their cousins north of the border, the Welsh ‘37/4s’ were primarily passenger machines and they also found themselves allocated to Liverpool Lime St/Manchester Piccadilly/North Wales-Cardiff and Cardiff-Bristol-Weymouth diagrams. Outshopped in large logo livery, it soon gained a small red Welsh dragon logo on the driver’s cabsides, and later acquired the Sir Dyfed / County of Dyfed nameplates from No. 37180 in April 1987. However, they were removed after just four months and the locomotive was renamed Eisteddfod Genedlaethol – after the famous festival – in the August. In January 1991 it was released from Glasgow St Rollox Works in Railfreight Construction colours, and notably retained its red-backed nameplates like the other three ‘37/4s’ to gain these particular squadron decals. It kept its name on its Regional Railways repaint in May 1993 and was stored in 2001. It was disposed of at EMR Kingsbury in February 2008. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37414 Triple Grey Construction Sector

Class 37 37414 Triple Grey Construction Sector The introduction of Class 156 ‘Super Sprinters’ on the West Highland from January 1989 and on the Far North/Kyle lines in the May triggered an exodus of Class 37/4s to freight work. By the end of that year, Laira, Motherwell and Tinsley had gained allocations, while Immingham and Thornaby both acquired three locos each in the middle of 1990, by which point half the sub class were south of the border. One of these was No. 37414, which was on china clay duties in Cornwall until transferred to the North Lincolnshire depot’s FABI pool that September. This loco, which retained its Western Region-style lamp irons at the No.2 end only, had been repainted in the Roundel triple grey scheme with Distribution decals in August 1989, but quickly swapped these for more appropriate Construction brandings after its move. This saw it mostly outbased at Buxton in the Peak District to haul aggregates, cement and the iconic ICI limestone trains.While it wasn’t completely allergic to passenger work during this period, it moved to Crewe Diesel in November 1992 to join the RCMC Regional Railways North West pool, initially to work Liverpool Lime St/Crewe-Cardiff trains, still wearing its classic Railfreight image. In March 1993 it became the first member of the fleet to receive the new Regional Railways livery along with the name Cathays C&W Works 1846-1993, becoming a stalwart of the North Wales coast and the famed ‘club’ trains from Liverpool and Manchester Victoria. It soldiered on until it was stored by EWS in March 2000 and was scrapped at TJ Thomson’s of Stockton exactly nine years later. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37421 Colas

Class 37 37421 Colas Stored by EWS at Motherwell in March 2005 and sold for preservation at the Pontypool & Blaenavon Railway in 2009, No. 37421 was one of four Class 37s that was purchased by Colas Rail in 2013 for a return to the main line, along with Nos. 37116, 37175 and 37219. While the latter pair debuted for their new owner in the middle of 2014, it would be another year before No. 37421 would re-enter traffic along with BR green-liveried former Harry Needle Class 37/0 No. 37057/D6757, just in time to assist on the newly acquired Network Rail infrastructure monitoring contract. For the next four years, the Colas Class 37/4 was a solid performer on various test formations, until called to South Wales in May 2019 to provide power for Cardiff-Rhymney line commuter turns along with hired-in Nos. 37025 and 37418. This followed a fallow few months when the locomotive was under repair and eventually returned after a bogie swap with No. 37175. The Rhymney workings ended in March 2020 and it was back to test train work, mixed in with NR saloon duties with No. 975025 Caroline and the odd infrastructure duty. Cosmetically, towards the end of that same year it swapped its Colas ‘hard hat’ logos for new diamond stickers, although it has stubbornly retained its unique arrangement of single lamp irons on different sides of the locomotive at each end. Despite the increasing number of Colas HST power cars on the NR services, No. 37421 is still a regular atop PLPR (Plain Line Pattern Recognition) and UTU (Ultrasonic Testing Unit) formations and is expected to remain a key component of the operator’s fleet for several years to come. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37408 'Loch Rannoch' EWS

Class 37 37408 'Loch Rannoch' EWS Arguably the most popular of the Class 37/4s in the British Rail and early privatisation era, No. 37408 Loch Rannoch clinged obstinately to its large logo paint scheme – the last so adorned – until being called to Toton in mid-1998 for a repaint. Following a protracted overhaul, which included a new toughened centre window, it debuted in the revised maroon and gold of its owner EWS, sans-nameplates, in November and wasn’t reunited with its famous name until the following February. Over the next seven years, the former No. 37289 (built as D6989) was a regular performer on loco-hauled services around the country, particularly Birmingham/Crewe-Bangor/Holyhead, Cardiff-Fishguard/Rhymney and Crewe/Manchester, Leeds-Carlisle/Knaresborough and even in Scotland on the Fort William sleeper. It could also be found on a wide variety of freight and even Railtrack/Network Rail test trains and was variously allocated to Crewe Diesel, Motherwell, Cardiff Canton, Toton and Margam during this period.Outshopped in the same livery in March 2002, its rock star status meant that it was never long before it gained various accoutrements, including regular bouts of Eastfield ‘Westies’, silver buffers, white lamp irons, black headcode panels and even Immingham 40B shedplates. It seemed inevitable that Rannoch would return to large logo in due course and would have been a favourite for preservation, but after running away and colliding with its stabled rake of coaches at Rhymney on 1 August 2005 the locomotive was stored and repairs were not authorised. It was eventually scrapped at EMR Kingsbury in January 2008. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 66 66789 'British Rail 1948 - 1997' GBRF BR Large Logo

Class 66 66789 'British Rail 1948 - 1997' GBRF BR Large Logo Arriving in the uk aboard MV Fairload on the 23rd June 2000, this locomotive was originally numbered 66250 and was the last EWS class 66 as part of their “red revolution” which had started with 66001 just a few years earlier. As part of a restructuring, EWS offered several locomotives for sale and 66250 was quired by GBRF in 2017 and was allocated the new number 66789. Unveiled on the 27th Feb 2018, 66789 sports a homage to the British Rail large logo blue livery to commemorate the 70th anniversary of the formation of British Railways back in 1948. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66849 'Wylam Dilly' Colas

Class 66 66849 'Wylam Dilly' Colas 66849 Started life as a Freightliner Machine numbered: 66576 and was originally named: 'Hamburg Sud Advantage', it was taken off lease from freightliner in 2011 and was taken by Colas quickly afterwards and was named 'Wylam Dilly' and is still to this day. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66421 'Gresty Bridge TMD' DRS - DCC Sound

Class 66 66421 'Gresty Bridge TMD' DRS - DCC Sound One engine that hasn’t changed operators was DRS owned 66421. This particular locomotive was delivered on the 9th September 2007. Originally carrying the DRS compass livery, the locomotive was soon put to work on a variety of the companies trains.66421 was refreshed with the new simplified DRS livery during 2015 and ran unnamed until 2018 when it featured at the DRS Crewe Gresty Bridge TMD open day where it was named after the depot. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66724 'Drax Power Station' GBRF

Class 66 66724 'Drax Power Station' GBRF  Another locomotive that was transported on the MV Fairload was GBRF’s 66724. Arriving on the 20th December 2006, this locomotive originally sported the “First group” rendition of GBRF livery ahead of the press launch on the 8th January 2007 at Old Oak Common. 66724 gained its nameplates “Drax Power Station” later the same year. Surviving in much the same condition for a decade, 66724 was given a fresh coat of GBRF’s now standard dark blue in 2017. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66789 'British Rail 1948 - 1997' GBRF BR - DCC Sound

Class 66 66789 'British Rail 1948 - 1997' GBRF BR Large Logo - DCC Sound Arriving in the uk aboard MV Fairload on the 23rd June 2000, this locomotive was originally numbered 66250 and was the last EWS class 66 as part of their “red revolution” which had started with 66001 just a few years earlier. As part of a restructuring, EWS offered several locomotives for sale and 66250 was quired by GBRF in 2017 and was allocated the new number 66789. Unveiled on the 27th Feb 2018, 66789 sports a homage to the British Rail large logo blue livery to commemorate the 70th anniversary of the formation of British Railways back in 1948. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66142 'Maritime Intermodal Three' DB - DCC Sound

Class 66 66142 'Maritime Intermodal Three' DB Maritime Blue - DCC Sound Once an anonymous EWS maroon and gold class 66, 66142 led the life of a typical EWS 66 from its delivery during August 1999 right through the acquisition by DB up until its turn in the paintshop came in 2019 at the ripe age of 20 years old! Rather than the bright red of DB, 66142 gained the vibrant blue colour of Maritime Intermodal and was named “Maritime Intermodal Three”. Following Accurascale handing out free 'a' stickers at Warley in 2022, a number of these have found their way in to a wide variety of places, including on real rolling stock. 66142 is one such locomotive and proudly wears its 'a' sticker under one set of numbers Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66142 'Maritime Intermodal Three' DB Maritime Blue

Class 66 66142 'Maritime Intermodal Three' DB Maritime Blue Once an anonymous EWS maroon and gold class 66, 66142 led the life of a typical EWS 66 from its delivery during August 1999 right through the acquisition by DB up until its turn in the paintshop came in 2019 at the ripe age of 20 years old! Rather than the bright red of DB, 66142 gained the vibrant blue colour of Maritime Intermodal and was named “Maritime Intermodal Three”. Following Accurascale handing out free 'a' stickers at Warley in 2022, a number of these have found their way in to a wide variety of places, including on real rolling stock. 66142 is one such locomotive and proudly wears its 'a' sticker under one set of numbers Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66302 Fastline

Class 66 66302 Fastline 66302 arrived in the uk as part of a “mixed delivery” of class 66 low emission models, alongside locos for Freightliner and DRS aboard the MV Stellanova on the 8th November 2006. Following unloading and acceptance it worked its first train of HYA’s on the 13th November. When Jarvis went in to administration, Fastline’s small fleet of class 66 locomotives were acquired by DRS before being repainted into their house colours Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66414 Freightliner Powerhaul

Class 66 66414 Freightliner Powerhaul 66414 was originally leased to DRS and this is how it arrived fresh from the factory aboard MV fairlift on the 16th October 2006. When that lease expired, DRS did not renew leaving the locomotive available for transfer to Freightliner. Perhaps better known for its spell as “James the Engine” in Stobart livery, it gained the new “powerhaul” version of freightliner livery in 2015 and this is how it remains to this day. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66414 Freightliner Powerhaul - DCC Sound

Class 66 66414 Freightliner Powerhaul - DCC Sound 66414 was originally leased to DRS and this is how it arrived fresh from the factory aboard MV fairlift on the 16th October 2006. When that lease expired, DRS did not renew leaving the locomotive available for transfer to Freightliner. Perhaps better known for its spell as “James the Engine” in Stobart livery, it gained the new “powerhaul” version of freightliner livery in 2015 and this is how it remains to this day. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Accurascale Class 66 66421 'Gresty Bridge TMD' DRS

Class 66 66421 'Gresty Bridge TMD' DRS One engine that hasn’t changed operators was DRS owned 66421. This particular locomotive was delivered on the 9th September 2007. Originally carrying the DRS compass livery, the locomotive was soon put to work on a variety of the companies trains.66421 was refreshed with the new simplified DRS livery during 2015 and ran unnamed until 2018 when it featured at the DRS Crewe Gresty Bridge TMD open day where it was named after the depot. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Hornby BR Class 56 56060 'The Cardiff Rod Mill' (Sound Fitted)

BR Railfreight, Class 56, Co-Co, 56060 'The Cardiff Rod Mill' - Era 8 (TXS DCC Sound Fitted)  Includes: - Highly detailed with fine grill parts - BR railfreight two tone grey livery - Metal Sector logo - TXS DCC Sound Fitted    (NOTE: This model and sound functions can ONLY be operated with the HM7000 App via bluetooth or a DCC digital controller) - Accessory bag - Sprung buffers - NEM couplings and pockets - 5 pole motor - Model will traverse 2nd radius curves minimum (R606/R607) - Era 8 - OO Scale

Hornby RailRoad Procor, PVA Van - Era 8

RailRoad Procor, PVA Van - Era 8 Includes: - Railroad range - Procor Livery - Body side detail and fine printing - Will traverse Radius 2 curves - Fixed Tension lock couplings - OO scale  

Scenecraft Low Relief Dispensing Chemist White (OO)

Low Relief Dispensing Chemist White Features: Highly detailed, hand painted model Fully decorated and ready to place on your layout The Low Relief Dispensing Chemist is an essential addition to any street scene to ensure that your miniature people have easy access to medications and other healthcare supplies. Being produced in Low Relief and decorated with white highlights, this model will take up minimal space and can be combined with other Low Relief buildings from Scenecraft to quickly and easily create a realistic street scene. - OO Scale

Bachmann BR Mk1 RMB Restaurant Miniature Buffet BR Maroon SC1839

BR Mk1 RMB Restaurant Miniature Buffet BR Maroon SC1839 Features: Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 RMB Restaurant Miniature Buffet BR Maroon [PF] SC1839

BR Mk1 RMB Restaurant Miniature Buffet BR Maroon [PF] SC1839 Features: Passenger Fitted Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 5 - OO Scale

Bachmann BR Mk1 RMB Restaurant Miniature Buffet BR InterCity (Exec) 1848

BR Mk1 RMB Restaurant Miniature Buffet BR InterCity (Executive) 1848 Features: Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 8 - OO Scale

Bachmann BR Mk1 RMB Restaurant Mini Buffet BR InterCity (Exec) [PF]1848

BR Mk1 RMB Restaurant Miniature Buffet BR InterCity (Executive) [PF] 1848 Features: Passenger Fitted Commonwealth Bogies Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. - Era 8 - OO Scale

Accurascale LNER J69 359 (7359) LNER Lined Black - DCC Sound

LNER J69 359 (7359) LNER Lined Black - Sound Fitted Includes: - SOUND FITTED VERSION   - NOTE: To use this model, you MUST have a Digital (DCC) Controller in order to operate functions. - Scale length of 110.66mm over headstocks, 36mm across body. - Minimum Radius Operation: 438mm (2nd radius set-track). - Die-cast metal chassis and boiler, target weight in the region of 260g-275g. - Factory fitted brake rigging. - All wheel pickup, DCC ready with stay alive arrangement. - Fully detailed cab area, with easily removable roof, fixed by magnets. - Fully detailed bunker area. - Moveable roof ventilator. - Eroded metal/plastic detail parts, including grab handles, steps, buffer pipework, lamp irons etc. - Brass turned whistles/valves fitted. - Etched metal pre-painted numberplates and plaques (where applicable). - Fully sprung metal buffers, factory-installed pipework, and screw couplings. - Accurate liveries including fully lined where applicable, and detailed crests/emblems. - Magnetically removable smoke box door for access to decoder. - Small, flexible neck NEM compliant coupler mounts set at correct height, with mini-tension-lock couplers. - Factory installed DCC Sound option, with two quality sugarcube speakers contained in sound capsules located for best possible sound, in the side tanks (DCC Sound models only). - Flickering/steady Firebox glow (depending on DCC fitting). - Large coreless motor, for a haulage capacity of not less than 1kg, from a standing start, on a 3% incline. - Helical gear box for maximum performance and slow speed running. - Gearing arranged so locomotive can achieve a scale maximum top speed of 50 mph (80 kmh). - OO Scale

Accurascale Late BR J68 68646 Plain Black - DCC Sound

Late BR J68 68646 Plain Black - Sound Fitted  Includes: - SOUND FITTED VERSION   - NOTE: To use this model, you MUST have a Digital (DCC) Controller in order to operate functions. - Scale length of 110.66mm over headstocks, 36mm across body. - Minimum Radius Operation: 438mm (2nd radius set-track). - Die-cast metal chassis and boiler, target weight in the region of 260g-275g. - Factory fitted brake rigging. - All wheel pickup, DCC ready with stay alive arrangement. - Fully detailed cab area, with easily removable roof, fixed by magnets. - Fully detailed bunker area. - Moveable roof ventilator. - Eroded metal/plastic detail parts, including grab handles, steps, buffer pipework, lamp irons etc. - Brass turned whistles/valves fitted. - Etched metal pre-painted numberplates and plaques (where applicable). - Fully sprung metal buffers, factory-installed pipework, and screw couplings. - Accurate liveries including fully lined where applicable, and detailed crests/emblems. - Magnetically removable smoke box door for access to decoder. - Small, flexible neck NEM compliant coupler mounts set at correct height, with mini-tension-lock couplers. - Factory installed DCC Sound option, with two quality sugarcube speakers contained in sound capsules located for best possible sound, in the side tanks (DCC Sound models only). - Flickering/steady Firebox glow (depending on DCC fitting). - Large coreless motor, for a haulage capacity of not less than 1kg, from a standing start, on a 3% incline. - Helical gear box for maximum performance and slow speed running. - Gearing arranged so locomotive can achieve a scale maximum top speed of 50 mph (80 kmh). - OO Scale

Hornby RailRoad Satlink Western, 45t ZRA Closed Van, KDC201003 - Era 8

RailRoad Satlink Western, 45t ZRA Closed Van, KDC201003 - Era 8 Includes: - Satlink Western Red and Yellow Livery - Body side detail and fine printing - Will traverse Radius 2 curves - Fixed Tension lock couplings - OO scale Vehicle information: The VDA van is a type of air-braked closed van built by BR between 1969 and 1977. The vans, reminiscent of a classic vent van albeit extended served a very similar purpose to their stout predecessors. The VDA was a general use van designed to haul anything and everything.  The VDA vans were used on 'Speedlink' services designed to quickly haul general freight around the country. The wagons were rapidly withdrawn after the 'Speedlink' service was discontinued; 436 vans were in service at the end of 1990 but by August 1994 only 97 were shown on BR books. By 2008, only two VDA vans remained.

Peco Small Radius Curved Turnout Left Hand Code 100 Unifrog

Peco - Streamline Small Radius Curved Turnout L/H Adapted from the existing PECO Setrack Curved turnout, this brand new development allows us to add a really useful component into the classic Streamline OO/HO Code 100 range. At last we are able to offer a tighter radius turnout for Streamline users, something that has been requested on and off for a long time.  Curved turnouts are fantastic space savers and their benefits are often overlooked. Given that so many layouts are built to be located in small spaces the use of curved turnouts ought to be greater than it is, so these new Streamline turnouts may well address many concerns that modellers have when planning their model railway. This turnout has been derived from the existing Setrack curved turnout the geometry departs from the common frog angle adopted by the Streamline system (which is based on a common frog angle of 12 degrees) - this turnout has a 11.25 degree frog angle and the inner radius is just 438mm, or 17.2 inches. This should not be seen as any disadvantage and the real benefit is that they will allow much tighter access where it is needed, such as in restricted places where a layout has to loop around into a fiddle yard, for example.  The standard Streamline curved turnout has a minimum inside radius of 762mm, 30 inches, so the difference is quite clear to see. Technical Specification: Length: 168mm Radius: 438mm - OO Scale

Peco Small Radius Curved Turnout Right Hand Code 100 Unifrog

Streamline Small Radius Curved Turnout R/H Adapted from the existing PECO Setrack Curved turnout, this brand new development allows us to add a really useful component into the classic Streamline OO/HO Code 100 range. At last we are able to offer a tighter radius turnout for Streamline users, something that has been requested on and off for a long time.  Curved turnouts are fantastic space savers and their benefits are often overlooked. Given that so many layouts are built to be located in small spaces the use of curved turnouts ought to be greater than it is, so these new Streamline turnouts may well address many concerns that modellers have when planning their model railway. This turnout has been derived from the existing Setrack curved turnout the geometry departs from the common frog angle adopted by the Streamline system (which is based on a common frog angle of 12 degrees) - this turnout has a 11.25 degree frog angle and the inner radius is just 438mm, or 17.2 inches. This should not be seen as any disadvantage and the real benefit is that they will allow much tighter access where it is needed, such as in restricted places where a layout has to loop around into a fiddle yard, for example.  The standard Streamline curved turnout has a minimum inside radius of 762mm, 30 inches, so the difference is quite clear to see. Technical Specification: Length: 168mm Radius: 438mm - OO Scale

Scenecraft Low Relief Stone Terrace Left Hand Door Brown (OO)

Low Relief Stone Terrace Left Hand Door Brown Terraced houses built from stone are common in many areas of the UK as buildings are often constructed from locally available materials, and these Low Relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. This model is designed to work alongside the other Low Relief Stone Terraces in the Scenecraft range and has a door painted in brown on the left-hand side of the building, with windows and a drainpipe on the right. Features: Low Relief Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting - OO Scale

Scenecraft Low Relief Stone Terrace Left Hand Door White (OO)

Low Relief Stone Terrace Left Hand Door White Terraced houses built from stone are common in many areas of the UK as buildings are often constructed from locally available materials, and these Low Relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. This model is designed to work alongside the other Low Relief Stone Terraces in the Scenecraft range and has a door painted in white on the left-hand side of the building, with windows and a drainpipe on the right. Features: Low Relief Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting - OO Scale

Scenecraft Low Relief Stone Terrace Right Hand Door Green (OO)

Low Relief Stone Terrace Right Hand Door Green Terraced houses built from stone are common in many areas of the UK as buildings are often constructed from locally available materials, and these Low Relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. This model is designed to work alongside the other Low Relief Stone Terraces in the Scenecraft range and has a door painted in green on the right-hand side of the building, with windows and a drainpipe on the left. Features: Low Relief Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting - OO Scale

Scenecraft Low Relief Stone Terrace Right Hand Door Red (OO)

Low Relief Stone Terrace Right Hand Door Red Terraced houses built from stone are common in many areas of the UK as buildings are often constructed from locally available materials, and these Low Relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. This model is designed to work alongside the other Low Relief Stone Terraces in the Scenecraft range and has a door painted in red on the right-hand side of the building, with windows and a drainpipe on the left. Features: Low Relief Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting - OO Scale

Bachmann Class 158 2-Car DMU 158856 Central Trains

Class 158 2-Car DMU 158856 Central Trains The Class 158 is one of British Rail’s most successful second generation Diesel Multiple Units (DMUs); first introduced in 1989, the entire fleet remains in traffic to this day. Over the years many colourful liveries have adorned the units, none more so that the vivid green scheme of Central Trains and one such unit is depicted by this Bachmann Branchline model. The pinnacle of OO scale second generation DMUs, the Branchline Class 158 combines high fidelity bodyshells with an underframe that’s adorned with separate components depicting the engines, electrical equipment, and auxiliary gear. It’s the livery application which really brings these models to life and every element has been replicated in miniature. Whilst the main colours are spray painted, the myriad smaller logos, symbols and lettering are applied using a specialist printing process, using BR and corporate specification fonts, logos and colours. Driven by the low-level drive mechanism, which is fitted to each vehicle, the conductive couplings ensure that the two vehicles work together in harmony and enable the use of a single decoder for DCC operation. Fitting that decoder couldn’t be easier thanks to the clip-off underframe panel behind which the decoder socket is fitted and combined with the pre-fitted speaker in each car, it’s easy to fit sound to your model, or why not let us do the work for you by choosing a SOUND FITTED model for a fully immersive operating experience straight out of the box. FEATURES: Pristine Central Trains livery Running No. 158856 Two-Car Unit comprising car Nos. 52856 & 57856 Destination blinds for Leicester Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 610mm - Era 9 - OO Scale

Scenecraft Low Relief Rear of Terrace (Right) Hand Door Blue (OO)

Low Relief Rear of Terrace (Right) Hand Door Blue Includes: - Low Relief - Highly detailed, hand painted model - Fully decorated and ready to place on your layout - Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting - Dimensions: 60mm (L) x 34.5mm (W) x 105.5mm (H) - OO Scale Historical information: Terraced houses are common through much of the UK and these Low Relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. This model is designed to work alongside the other Low Relief Rear of Terrace models in the Scenecraft range. It has a painted blue door in a lean-to located on the left hand side.

Scenecraft Low Relief Rear of Terrace (Right) Hand Door Green (OO)

Low Relief Rear of Terrace (Right) Hand Door Green Includes: - Low Relief - Highly detailed, hand painted model - Fully decorated and ready to place on your layout - Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting - Dimensions: 60mm (L) x 34.5mm (W) x 105.5mm (H) - OO Scale  Historical information: Terraced houses are common through much of the UK and these Low Relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. This model is designed to work alongside the other Low Relief Rear of Terrace models in the Scenecraft range. It has a painted Green door in a lean-to located on the Left hand side

Scenecraft Low Relief Left Hand Bay Terrace Blue (OO)

Scenecraft - Low Relief Left Hand Bay Terrace Blue Terraced houses are common through much of the UK and these Low Relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. This model is designed to work alongside the other Low Relief Terrace models in the Scenecraft range. It has the bay window on the left-hand side of the building with the blue-painted door on the right hand side. MODEL FEATURES: Low Relief Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting Dimensions: 36mm (W) x 68mm (L) x 132mm (H) - OO Scale

Scenecraft Low Relief Right Hand Bay Terrace Black (OO)

Scenecraft - Low Relief Right Hand Bay Terrace Black Terraced houses are common through much of the UK and these Low Relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. This model is designed to work alongside the other Low Relief Terrace models in the Scenecraft range. It has the bay window on the right-hand side of the building with the black painted door on the left-hand side. MODEL FEATURES: Low Relief Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting Dimensions: 36mm (W) x 68mm (L) x 132mm (H) - OO Scale

Scenecraft Low Relief Terrace Courtyard Entrance (OO)

Scenecraft - Low Relief Terrace Courtyard Entrance Terraced houses are common through much of the UK and these Low Relief models from Scenecraft make it easy to incorporate this familiar sight into minimal space, as a backdrop to any layout or diorama. This Terrace Courtyard Entrance model is designed to fit between two of the Low Relief Terrace models from the Scenecraft range, in order to provide access to the yards and gardens behind the houses. MODEL FEATURES: Low Relief Highly detailed, hand painted model Fully decorated and ready to place on your layout Etched metal window frames with realistic glazing - making it perfect for use with Woodland Scenics JustPlug lighting Dimensions: 27mm (W) x 32mm (L) x 122mm (H) - OO Scale

Metcalfe OO Water Wheel (Mini Kit) OO Scale

Water Wheel (Mini Kit) A intricate wooden waterwheel, perfect for creating watermills. Water chute comes as plain card, simply cover with your stone/brick of choice.  - OO Scale

Hornby Track Planning Symbols

Track Planning Symbols Before you spend money on the real track: model your track layout ideas with these quarter scale track section replicas. Sections clip together to build your layout in miniature. Pack contains more than 100 track pieces, representing most types of section that you may use.  

Thomas the Tank Range Henry the Green Engine with Moving Eyes

Henry the Green Engine with Moving Eyes No. 3 Henry the Green Engine is one of the largest engines to operate on the Island of Sodor, being fast and powerful he can handle the biggest trains with ease. Carefully reproduced in miniature, Henry’s smiley face will bring joy to any model railway. Suitable for use on OO gauge track, watch his eyes move from side to side as he goes! Henry can be controlled using a traditional analogue controller, or fit a DCC decoder – a quick and easy task thanks to the built in socket – to operate Henry using Digital Command Control (DCC). Fitted with ‘Tension Lock’ couplings, Henry can couple up to other models from Bachmann Europe’s OO Scale Thomas & FriendsTM range, as well as models from the Bachmann Branchline OO scale range. Includes: - Moving Eyes - Equipped with a Next18 DCC decoder socket – recommended decoder No. 36-567A - Suitable for young Thomas & Friends fans aged 3+ - Length 241mm - OO Scale

Peco Streamline Bullhead flexible Track (914mm) C75

Streamline Bullhead flexible Track (914mm) - Streamline Code 75 Finescale  - Available to buy in Store. - Telephone for mail orders of 'full boxes' of track or minimum orders of 10X lengths. - OO Scale

Peco Wooden sleeper type - flexi track (914mm) C75

Wooden sleeper type - flexi track (914mm) - Streamline Code 75 Finescale - Available to buy in Store. - Telephone for mail orders of 'full boxes' of track or minimum orders of 10X lengths. - OO Scale

Peco Wooden sleeper type - nickel silver rail (914mm) Code 100

Wooden sleeper type - nickel silver rail (914mm) Code 100 *Minimum order quantity - 10 lengths  - OO Scale Due to length of parcel, will be despatched via courier, usually UPS.

Peco Steel Sleeper Type - flexi track (914mm) C75

Steel Sleeper Type - flexi track (914mm) - Streamline Code 75 Finescale - Available to buy in Store. - Telephone for mail orders of 'full boxes' of track or minimum orders of 10X lengths. - OO Scale

Peco Concrete sleeper type - flexi track (914mm) C75

Concrete sleeper type - flexi track (914mm) - Streamline Code 75 Finescale - Available to buy in Store. - Telephone for mail orders of 'full boxes' of track or minimum orders of 10X lengths. - OO Scale

DCC Concepts DCD-ZNmini.4 Zen Black Decoder Mini 8Pin

DCD-ZNmini.4 Zen Black Decoder Mini 8Pin Includes – 1.1 Amps peak power– 750mA continuous power– 4 functions at 100mA each– 19mm x 11mm x 6mm– 8-pin & harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Brown-Out Protection on-board– Stay-Alive connection

Peco Long Straight - 670mm long

Long Straight 670mm long - Code 100 - OO scale *Minimum order 6 lengths

Hornby Long Straight

Long Straight - OO scale - length 670mm *Mimimum order 6 lengths

Hornby LNER A4 Class 4-6-2 4468 ‘Mallard’ - Era 3

LNER A4 Class 4-6-2 4468 ‘Mallard’ in 1938 condition Includes - Accessory bag includes brake rigging and vacume pipes - 3 Pole motor with brass fly wheel - 8 PIN DCC Ready socket (NOTE: This model is compatiable with the HM7000TXS Sound File decoders. This will require the Hornby HM7000 App or a suitable Digital Controller to operate) - NEM Couplings and Pockets - Will traverse 2nd raidus curves minimum (R606, R607) - Railroad Range - OO scale