Bachmann PCA Wagon BCC11026 'Blue Circle Cement' Grey [W]

PCA Metalair Bulk Powder Wagon 'Blue Circle Cement' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Blue Circle Cement’ Grey livery Running No. BCC11026 Accessory Pack NEM Coupling Pockets Length 115mm (over couplings)

Bachmann PCA Wagon BCC11050 'Freightliner Heavy Haul' Grey [W]

PCA Metalair Bulk Powder Wagon 'Freightliner Heavy Haul' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Freightliner Heavy Haul’ Grey livery Running No. BCC11050 Accessory Pack NEM Coupling Pockets

Bachmann PCA Wagon BCC11089 'Freightliner Heavy Haul' Grey [W]

PCA Wagon BCC11089 'Freightliner Heavy Haul' Grey [W] Rail has long been the favoured mode of transport for moving bulk goods and cement is just one commodity for which specialised wagons have been developed to facilitate this. In the mid-Twentieth century British Railways introduced the ‘Presflo’ wagons to carry powdered cement, which had previously been conveyed in goods vans in bagged form, and as time moved on new designs were sought to replace the distinctive ‘Presflos’. Many of the new cement wagons, which were coded PCAs under the Total Operations Processing System (TOPS), featured depressed centres or ‘V’ tanks, but the ‘Metalairs’ built for Blue Circle Cement had parallel tanks. The wagons were built by Powell Duffryn and Procor in the mid-1980s and used a discharge system developed by Metalair; many remain in use today. The Bachmann Branchline ‘Metalair’ wagons are faithful 4mm scale replicas of the real thing, using injection moulded bodyshells to capture the distinctive shape of the parallel tank that is then adorned with separate tank filler hatches, walkways, ladders and end pipework. The chassis boasts a wealth of fine detail too, from the suspension and axleboxes which are modelled in full relief to the discharge pipework and brake components that are each added individually. The bufferbeams are finished with metal buffer heads, a cosmetic coupling hook and lamp iron, while metal wheelsets are employed along with NEM coupling pockets. MODEL FEATURES: Bachmann Branchline OO Scale Era 9 Weathered ‘Freightliner Heavy Haul’ Grey livery Running No. BCC11089 Accessory Pack NEM Coupling Pockets Length 115mm (over couplings)

Bachmann SSA Scrap Wagon EWS 470078 [W]

SSA Scrap Wagon EWS 470078 [W] The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Weathered EWS livery Running No. 470078 Features: Length 126mm (over couplings) - OO Scale

Bachmann SR 12T Even Planked Ventilated Van Express Dairy Company N48359

SR 12T Even Planked Ventilated Van Express Dairy Company N48359 Britain’s railways were developed primarily to move freight and the early railway companies employed vans of many different designs to transport goods and merchandise that required covered transport. Each railway company had its own designs, and a defining feature of the Southern Railway’s standard vans was the elliptical roof. The vans were clad with planks of an even width, although later builds employed two widths of plank in a 2+2 formation, and later still plywood cladding was also used. The ventilators fitted at either end of the van allowed fresh air to circulate inside keeping perishable items cool whilst in transport. This Branchline models depicts one of the many ventilated vans built with even cladding, replicated with fine engraving whilst precision moulding captures the external bracing of the van body and the door hinges and locking detail, even down to individual rivets. The chassis employs metal wheelsets of the 3-hole disc variety, whilst the brakes, brake handles and associated gear is all included. Representing a van fitted with vacuum brakes, the brake cylinder is mounted underneath the wagon and brake pipes are fitted to each bufferbeam alongside metal buffer heads cosmetic coupling hooks. Details: Pristine Express Dairy Company Blue livery Running No. N48359 Features: NEM Coupling Pockets Length 86mm (over couplings) - OO Scale

Bachmann POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5010

POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5010 The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Pristine Standard Railfreight Blue & Yellow livery Running No. RLS5010 Features: Length 126mm (over couplings) - OO Scale

Bachmann POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5952 [W]

POA Scrap Wagon 'Standard Railfreight' Blue & Yellow RLS5952 [W] The POA Scrap Wagons were built from new or converted from other, redundant types, during the 1980s to carry scrap metal. The open box design was loaded and unloaded using grab machines or electro-magnets and the wagons entered traffic in a bold blue and yellow colour scheme. Built by Standard Wagon and owned privately by Standard Railfreight, in 1990 British Rail purchased the fleet of 191 wagons upon which they were recoded as SSA under the Total Operations Processing System (TOPS). The Bachmann Branchline model boasts an injection moulded bodyshell with separately fitted ladders on either side. The chassis incorporates a heavy metal weight providing a low centre of gravity which, combined with the blackened metal wheelsets, ensures smooth and reliable running. Details: Weathered Standard Railfreight Blue & Yellow livery Running No. RLS5952 Features: Length 126mm (over couplings) - OO Scale

Bachmann BR FVX Carflat Wagon BR Blue 'Motorail' 'B745075'

BR FVX Carflat Wagon BR Blue 'Motorail' 'B745075' Carflat Wagons allowed cars to be transported by rail, a practice that had started during the early twentieth century, but which became more common after World War Two as more families began realising the dream of owning their own motor vehicle. Many were built from old coach underframes that had had their bodies scrapped, with the type really coming to the fore in 1966 when British Rail launched its Motorail service, providing British holidaymakers with long distance train services where they could take their car on holiday with them, giving the convenience of independent transport whilst on holiday but without the long drive to get there. This Bachmann Branchline model depicts a BR-built Carflat, which to all intents and purposes is a standard BR Mk1 coach underframe running on a pair of BR B1 bogies. The deck of the vehicle is planked, and low side railings are fitted to prevent vehicles from accidentally driving off the side. Like a Mk1 coach, the underside of the vehicle is not overly populated but still features the typical truss frame along with vacuum brake cylinders and, unlike Mk1 coaches, has hand brake levers.     Details: Pristine BR Blue ‘Motorail’ livery Running No. B745075 Features: Accessory Pack NEM Coupling Pockets Length 270mm - OO Scale

Bachmann BR 22T CPV Presflo Bulk Powder Wagon 'Blue Circle' 'B888556'

BR 22T CPV Presflo Bulk Powder Wagon 'Blue Circle' 'B888556' When British Railways was formed in 1948, it inherited thousands of wagons from the big four. Whilst many of these wagons were perfectly suited for their intended purposes, BR identified a need for a purpose-built wagon to transport powered goods, such as cement, which previously were transported in bags in vans. So, in 1954 the first ‘Presflo’ (short for pressure flow) was built, which utilised the science of air fluidisation, a process which pumps air into the powder to prevent clumping and keep it loose, allowing the powder to be drained from the wagon efficiently. The design was very successful and lasted well into the 1980’s, finding use on different traffic flows up and down the country. This particular model depicts a ‘Presflo’ in BR Bauxite livery with ‘Blue Circle Bulk Cement’ company boards. This Bachmann Branchline ‘Presflo’ tooling suite comprehensively covers the history of these wagons, allowing us to produce a variety of different Presflo types. Our model features a wealth of separately fitted parts, including an end ladder, roof catwalk, handrails and underframe equipment. The ubiquitous BR Bauxite livery is applied using accurate colours and typefaces to produce an iconic wagon fit for any OO scale model railway.     Details: Pristine BR Bauxite ‘Blue Circle Cement’ livery Running No. B888556 Features: Accessory Pack NEM Coupling Pockets Length 87mm - OO Scale

Bachmann Class 47/0 47226 BR Blue (Sound Fitted Deluxe)

Class 47/0 47226 BR Blue (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47226 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47238 BR Blue

Class 47/0 47238 BR Blue Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47238 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47238 BR Blue (Sound Fitted Deluxe)

Class 47/0 47238 BR Blue (Sound Fitted Deluxe) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47238 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 47/0 47238 BR Blue (Sound Fitted)

Class 47/0 47238 BR Blue (Sound Fitted) Bachmann’s award-winning Class 47 is back, and our brilliant Brush is better than ever following a brief spell in the works to add further enhancements to this stunning OO scale model. Every Branchline Class 47 now comes with our Bach-Up Stay Alive System pre-installed, providing uninterrupted power when running on DCC to eliminate stalling, light flicker and sound cut-outs. Talking of sound and our SOUND FITTED and SOUND FITTED DELUXE models now boast the Dual Fitted XL speaker system, combining two speakers for optimum sound reproduction – including the new enhanced bass reproduction speaker, a patented component which incorporates a passive radiator design for sound effects like you’ve never experienced before. To define the Class 47 look we’ve turned our attention to the cab windscreen glazing and made improvements to the fit and finish of this important area. Snowploughs were a significant feature of some Class 47s too, and we’ve totally redesigned this component which now attaches to the chassis of the locomotive, providing a fixed position for a realistic appearance even when running on curved track, and allowing the bufferbeam detail to be fitted at the same time. These enhancements only add to the stunning model that is the Branchline Class 47, with its high fidelity mouldings, a wealth of fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives - ensuring each model is faithful to its prototype. Details: Pristine BR Blue livery Running No. 47238 Plated Headcode Panels with Sealed Beam Marker Lights at No. 2 End Single Bufferbeam Bracket denoting a Brush-built Machine Single Arm Windscreen Wipers High Intensity Headlight Round Buffers Full Cab Roof Vents Serck Radiator Grilles Ribbed Exhaust Panels Blanked Roof Boiler Port Water Tanks Removed Plated Bogie-mounted Cab Steps Slow Speed Speedo Drive Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570A Length 255mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder pre-installed in SOUND FITTED and SOUND FITTED DELUXE versions - OO Scale

Bachmann Class 150/1 2-Car DMU 150101 Northern

Class 150/1 2-Car DMU 150101 Northern The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including Northern Trains. The distinctive blue and white livery of Northern makes a return to the Branchline Class 150 DMU, this time on a Class 150/1 as classmate 150101. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, roof ariels and exhaust, the Branchline model replicates the Class 150/1 faithfully. This announcement is also the first time we have produced Class 150/1’s with an accessible toilet in the DMSL, as signified by the blanked off toilet window on one side. The underframe boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and plug and play DCC compatibility makes the Class 150 DMU the perfect addition to any modern OO scale collection. This model is a sales area exclusive and is only available from stockists in Scotland and Northern England. Details: Pristine Northern livery Running No. 150101 Comprises Car Nos. 52101 and 57101 Destination Blinds for Buxton Features: Accessory Pack NEM Coupling Pockets Powerful 5 Pole Motor with Flywheel Interior Detailing and Lighting Directional Lighting Equipped with one 21 Pin DCC Decoder Socket – recommended Decoder 36-557A  Length 540mm - OO Scale

Bachmann Class 150/1 2-Car DMU 150101 Northern (Sound Fitted)

Class 150/1 2-Car DMU 150101 Northern (Sound Fitted) The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including Northern Trains. The distinctive blue and white livery of Northern makes a return to the Branchline Class 150 DMU, this time on a Class 150/1 as classmate 150101. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, roof ariels and exhaust, the Branchline model replicates the Class 150/1 faithfully. This announcement is also the first time we have produced Class 150/1’s with an accessible toilet in the DMSL, as signified by the blanked off toilet window on one side. The underframe boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and plug and play DCC compatibility makes the Class 150 DMU the perfect addition to any modern OO scale collection. This model is a sales area exclusive and is only available from stockists in Scotland and Northern England. Details: Pristine Northern livery Running No. 150101 Comprises Car Nos. 52101 and 57101 Destination Blinds for Buxton Features: Accessory Pack NEM Coupling Pockets Powerful 5 Pole Motor with Flywheel Interior Detailing and Lighting Directional Lighting Equipped with one 21 Pin DCC Decoder Socket – recommended Decoder 36-557A  Length 540mm - OO Scale

Bachmann Class 13 13003 BR Blue - DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 13 13003 BR Blue - Deluxe DCC Sound Fitted

Bachmann Branchline OO Scale Era 7 Pristine BR Blue livery Running No. 13003 OLEO Buffers (Master unit, cab end only) / LMS Pattern Buffers (Master unit radiator end, and Slave unit) SOUND FITTED – Fitted with a Zimo MS450P22 DCC Sound Decoder (Master unit) and a Zimo MN330P22 Loco Decoder (Slave unit) – See below for the function list Length 244mm   BACHMANN BRANCHLINE CLASS 13 SPECIFICATION EACH CLASS 13 COMPRISES 1x MASTER UNIT AND 1x SLAVE UNIT, BOTH OF WHICH ARE MOTORISED AND FULLY FUNCTIONAL MECHANISM (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at the cab end of the Master unit and the radiator end of the Slave unit Master and Slave units connect with a rigid coupling bar that fits into NEM362 coupling pockets mounted to integral close coupling mechanisms Auto-Release Couplings fitted at the cab end of the master unit and the radiator end of the slave unit – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater DETAILING (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT, WHERE APPLICABLE): Precision moulded bodyshell and frames/running board with numerous separately fitted parts including footsteps, bonnet grilles and lamp irons Separately applied metal detail parts, including sand boxes and sand pipes, grab handles, windscreen wipers, light conduits and lifting points Authentic outside-framed running gear Frames constructed from multiple components, including separate springs and brake gear allowing full relief detailing Sprung metal buffers Cab interior detailing which includes the control desk, instruments & dials, equipment cabinets and handbrake, all with era-specific decoration Each model supplied with a full set of decorated bufferbeam pipework, master-to-slave pipes and cables, bufferbeam infills and accessory parts including screw-link couplings (cosmetic) LIGHTING – MASTER UNIT: Four fully operational marker lights on the cab end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Master and Slave unit), or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control All marker lights on the Master unit can be turned on/off independent of the Slave unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application Lights fitted to the radiator end are prototypically non-functional LIGHTING – SLAVE UNIT: Four fully operational marker lights on the radiator end, controlled by microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configured light patterns and colours* (*selected lights only, choose between red or white) Shunting lights (one red and one white light) operated via a dedicated function on DCC (one DCC function controls the shunting lights on both the Slave and Master unit), or using an easy access microswitch on Analogue control All marker lights on the Slave unit can be turned on/off independent of the Master unit via two dedicated functions on DCC, or using an easy access microswitch on Analogue control Authentic light colours and temperatures selected for each model based on era and application DCC (COMMON FEATURES FOUND ON BOTH THE MASTER AND SLAVE UNIT): Plux22 DCC decoder interface Easy-access DCC decoder socket via a removable roof panel – secured by clips for ensured fit and alignment 2-pin connector wire for use between the Master and Slave units to ensure full DCC-functionality Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) SOUND: Two quality speakers employed for optimum sound reproduction, one in the Master unit and one in the Slave unit, fitted to every model as standard SOUND FITTED and SOUND FITTED DELUXE versions come with a pre-installed Zimo MS450P22 DCC Sound Decoder in the Master unit and a Zimo MN330P22 Loco Decoder in the Slave Unit Sound files produced specifically for the Bachmann Branchline Class 13 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied LIVERY APPLICATION: Authentic liveries applied to all models Multiple paint applications employed on each model using BR specification colours Logos, numerals and text added as appropriate using multi-stage tampo printing process, incorporating authentic typefaces, logos and colours SOUNDS F0 - Directional Lights - On / Off (plus Light Switch Sound) F1 - Sound On/Off F2 - Brake F3 - Whistle Toot F4 - Horn F5 - Light Engine Mode/Cold Start (engage F5 before turning F1 On) F6 - Coasting / Engine Idle F7 - Speed Lock F8 - Exhauster (Vacuum Train Brakes) F9 - Flange Squeal (Speed Related) F10 - Guard’s Whistle F11* - Auto-Release Coupling Sequence - Radiator End (Slave Unit) F12* - Auto-Release Coupling Sequence - Cab End (Master Unit) F13 - Buffer Clash F14 - Sanders F15 - Handbrake F16 - Fuel Transfer Pump F17 - Auto Wagon Buffering F18 - Shunting Lights (Master Unit and Slave Unit) F19 - Fade All Sounds F20 - All Radiator End (Slave Unit) Directional Lights Off F21 - All Cab End (Master Unit) Directional Lights Off F22 - Cab Light (Master Unit) F23 - Compressor F24 - On - “I'm Going Under” / Off - “Clear” F25 - Automatic Drain Trap F26 - On - Cab Door Opening / Off - Cab Door Closing F27 - Volume Down F28 - Volume Up *Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, disengagement of the couplings, and the movement of the locomotive to prevent coupling up reoccurring, along with associated sound effects.

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted)

Class 66/3 66304 DRS Plain Blue (Sound Fitted) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SF)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted)  The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (SFD)

Class 66/4 66422 'Max Joule 1958-1999' DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66422 Named ‘Max Joule 1958-1999’ ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue

Class 66/3 66304 DRS Plain Blue The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe)

Class 66/3 66304 DRS Plain Blue (Sound Fitted Deluxe) The Class 66 Diesel Locomotive revolutionised the British rail freight landscape when the first examples arrived in 1998, and more than a quarter of a century later, the type remains at the forefront of freight operations the length and breadth of the country. Now, we are delighted to present the all-new Bachmann Branchline OO Scale Class 66 which has been designed from the rails up, capturing this modern icon like never before. Details Specific to this Model: Pristine DRS Compass (Small Logo) livery Running No. 66304 ‘Low-Emission’ 5-Door Locomotive 2-Piece Double-Glazed, Aluminium-Framed Cab Side Windows Original WIPAC LED Light Clusters (2-Lamps, Mounted on Large Light Boxes) Large Top Light Box Standard UK Pattern Buffers Standard Drawgear Standard Horn Box NRN Radio Pod on Roof 4 Cab Vents 4 Securing Lugs at each End – Closely Spaced Cab Front Handrails with 7 Mounting Points Cab Interiors with Pedestal Control Panels Original Sandboxes Straight Sandpipe Brackets Perforated Bogie Lifeguards Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 282mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Directional lighting, switchable on/off at either end on DCC or Analogue control Day/Night mode, selectable on DCC or Analogue control Directional lights and Day/Night Mode selection is controlled via easy-access switches on the roof when operated on Analogue control Stabling lights mode* (red tail lights only, displayed at both ends) Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Easy-access DCC decoder socket via a removable roof panel – magnetically secured Bach-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Speaker Fitted – a pre-fitted speaker is included with every model as standard The new Class 66 combines a high-fidelity, injection-moulded bodyshell with a heavy, diecast chassis to which separate main frames are fitted. A multitude of individual parts are then added, manufactured in both metal and plastic, to capture every element of the prototype. The HTCR radial bogies are reproduced in miniature using multiple components, with many separately added details, resulting in these true to life replicas which interface neatly with the locomotive’s frames for an authentic appearance and accurate ride height. The separate axle heads that each rotate smoothly and reliably when the model is moving, mimicking this characteristic feature of the prototype, is the finishing touch. The colourful liveries of modern operators present some challenges when it comes to decorating our models, but with extensive research, close collaboration with the operators themselves and decades of experience producing beautifully finished models, we are able to replicate every detail. Paintwork is applied with a rich, uniform finish using original specification colours, which is then adorned with logos, typefaces and graphics, all reproduced authentically using multi-stage printing techniques to produce a model with the finest of looks. Meanwhile, ‘under the bonnet’ the new Class 66 boasts a high specification that utilises the latest advancements in model railway technology. A full lighting suite includes directional lights, with day and night mode and stabling mode, along with cab lights and machine room lights, all of which can be controlled to full effect when the model is used on DCC. To fit a DCC decoder, it’s simply a case of removing the magnetic roof panel and swapping out the blanking plate for a Plux22 decoder. DCC users also benefit from the integrated Bach-Up Stay Alive System which provides uninterrupted power to prevent stalling, light flicker and, for those fitting sound to their model, sound cut-outs. Already using DCC? Then why not opt for one of our SOUND FITTED models instead and start enjoying authentic sounds, a full complement of lights and the Bach-Up Stay Alive System straight out of the box! - OO Scale

Bachmann Wickham Type 27 Trolley Car WD9033 LMR Blue

Wickham Type 27 Trolley Car WD9033 LMR Blue The Wickham Trolley is undoubtedly the smallest powered model that can be found in the Bachmann Branchline OO Scale range yet still, this impressive model still packs a punch with a high level of detail and a smooth drive mechanism making this a striking addition to any OO collection. The Branchline model combines the trolley car, with its open cabin and seating for several personnel, with a trailer and it is here that the motor and mechanism is located, cleverly concealed by a ballast/spoil load. The trailer also sports a diecast metal chassis, with separate metal bearings fitted to the two axles and the gearing from the coreless motor to the driving axle is housed in a diecast metal gearbox. The driven wheelset is also fitted with traction tyres for assured running from this diminutive model. The semi-permanent coupling between the trolley and trailer allows electrical connections to be carried between the two, so that all eight wheels of the model can be equipped with pickups. With its wheels on full show, it’s easy to see that these have been replicated faithfully with the correct pattern and profile and brakes are added separately too. Meanwhile the trolley car itself has glazed windscreens with a separate windscreen wiper, headlights at the front and rear (non-functional), and a representation of the sheeting (that would have supposedly provided riders with protection from inclement weather!) rolled up and stowed along the roof edge. The real WD9033 arrived at the Longmoor Military Railway (LMR) in Hampshire in 1954, later finding fame in the 1960s film ‘The Great St. Trinians Train Robbery’ before it moved away from the LMR in 1970 and more recently the trolley has been preserved. Features: Trolley is now Preserved Pristine LMR Blue Livery Running No. WD9033 Coreless Motor Length 76mm - Era 4 - OO Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black

Class 69 69013 Andy's Man Club GBRf Black Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted Deluxe)

Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted Deluxe) Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted)

Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted) Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Bachmann Class 31/1 5848 BR Blue (Sound Fitted Deluxe)

Class 31/1 5848 BR Blue (Sound Fitted Deluxe) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Blue livery Running No. 5848 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 1D26 and 2B63 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 5848 BR Blue (Sound Fitted)

Class 31/1 5848 BR Blue (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Blue livery Running No. 5848 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 1D26 and 2B63 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 31101 BR Blue

Class 31/1 31101 BR Blue The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Blue livery Running No. 31101 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2B99 and 6M65 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 31101 BR Blue (Sound Fitted Deluxe)

Class 31/1 31101 BR Blue (Sound Fitted Deluxe)  The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Blue livery Running No. 31101 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2B99 and 6M65 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 31101 BR Blue (Sound Fitted)

Class 31/1 31101 BR Blue (Sound Fitted) The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Locomotive is now Preserved Pristine BR Blue livery Running No. 31101 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 2B99 and 6M65 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann Class 31/1 5848 BR Blue

Class 31/1 5848 BR Blue The Brush Type Twos – Class 30s and Class 31s – by Bachmann Branchline are back and better than ever, now featuring a Bach-Up Stay Alive System fitted as standard and all-wheel electrical pickup assuring the smooth and powerful performance you’ve come to expect from Bachmann Branchline models. Details on this model: Pristine BR Blue livery Running No. 5848 Original Body Original Gangway Doors Glazed Headcode Panels – displaying Blinds 1D26 and 2B63 Windscreen Washer Jets with Covers Modified Bufferbeam Cowling Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Exhaust Ports English Electric Engine Block Detail Original Open Boiler Port Original Water Filler Hatch Open Bodyside Steps Original Battery Boxes Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels on each bogie Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts including three-piece, body-mounted snow ploughs Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or twin red tail lights* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) - OO Scale

Bachmann BR Mk2F FO BR Blue & Grey (Inter-City) 'M3430' (OO)

BR Mk2F FO BR Blue & Grey (Inter-City) 'M3430' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. M3430 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F DBSO BR Blue & Grey (Inter-City) 'SC9703' (OO) (DCC)

BR Mk2F DBSO BR Blue & Grey (Inter-City) 'SC9703' - DCC Fitted The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. The DBSOs were used in Scotland to work push-pull services, usually with a Class 47/7 locomotive at the other end that had been specially modified to allow push-pull operations. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F DBSO in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panel is completed with metal wire grab handles. The inner end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the inner end, including the ETH socket and cabling, along with pipework and dummy knuckle couplings. It's the cab that makes the DBSO instantly recognisable amongst the Mk2 fleet and here, every detail has been considered, from the glazed cab windows with their separate window wiper to the corridor gangway with its optional cover. Again, a full set of bufferbeam pipework and accessories is included, along with the obstacle deflector, a characteristic feature of the DBSOs when viewed front-on. The light clusters complete the front end and working lights are fitted as standard. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief along with additional details like the speedometers found on the DBSOs. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, guard’s compartment and luggage area, complete with the caging which enclosed it. The livery application is nothing short of exceptional, using authentic colours, logos and fonts to give every model an exquisite appearance. The icing on the cake of this DCC On Board model is the full suite of lighting that is controlled by an integrated DCC Decoder. When used on DCC four separate lighting features can be enjoyed with individual control of the interior, Guard’s compartment and cab lights, plus the directional lights which display red or white according to the direction of travel. When used on analogue control, the interior lights and directional lights will work when power is applied. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. SC9703 Directional Lighting Interior Lighting DCC On Board – Integrated DCC Decoder provides full DCC control of the light features Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR Mk2F BSO BR Blue & Grey (Inter-City) 'M9516' (OO)

BR Mk2F BSO BR Blue & Grey (Inter-City) 'M9516' The Mk2Fs were the final evolution of the Mk2 family, British Rail’s second generation of standard coach design, and these coaches featured full air conditioning, interior panelling made of plastic, a new style of seating and tinted windows. Initially only three types were built, Tourist Second Opens, First Opens and Brake Second Opens, but some First Opens were later converted into Restaurant First Buffets, whilst several Brake Second Opens were fitted with a driving cab at one end, becoming Driving Brake Second Opens for push-pull use. When it comes to the Bachmann Branchline model, we’ve gone to great lengths to replicate every detail of the Mk2F in miniature. The Distinctive Mk2 shape is captured to a tee whilst on the roof, the ventilators are expertly moulded, and the toilet panels are completed with metal wire grab handles. Each end features separately fitted metal handrails, the corridor gangway doors are modelled faithfully, even down to the two small windows, and the end footsteps at each corner are also included. Additional accessories are supplied which can be fitted to the ends, including the ETH socket and cabling, a choice of interchangeable tail lamps and lamp brackets, and alternative buffers allowing users to choose between extended or retracted buffers. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst the flush, tinted glazing gives these coaches their characteristic streamlined appearance. Part way through their careers the Mk2Fs were fitted with door interlock lights, and these too are modelled where appropriate and are fully functional on DCC On Board models (when used on DCC). Take a look below the solebar and you will find a full complement of equipment – all necessary for the braking, electrical and air-conditioning systems. The B4 bogies are fitted with metal wheelsets that run in metal bearings, with each bogie constructed from several components to ensure that the springs, suspension, brakes and, where relevant, footsteps can all be modelled in full relief. The tension lock couplings fit into NEM pockets that are mounted on a close-coupling mechanism which is fitted to the coach floor, operating in tandem with the bogie as it turns. Inside each model is an interior featuring the prototypical layout of tables and chairs, and brake vehicles even contain the luggage compartment caging, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey (Inter-City) livery Running No. M9516 Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 273mm (over couplings) - Era 7 - OO Scale

Bachmann BR MK1 FO BR Blue & Grey 'M3116' (OO)

BR MK1 FO First Open BR Blue & Grey 'M3116' The Bachmann Branchline Mk1 Coaches have long been the model of choice for the discerning enthusiast wishing to add the iconic Mk1 Coach to their collection and today, these models continue to provide OO scale modellers with the finest models, carrying all the hallmarks of this iconic design. The distinctive profile of the Mk1 coach is captured to a tee and on the roof, the finely moulded ventilators are complemented by separately fitted metal handrails and, where appropriate, toilet filler pipes. On the bodysides each door is complete with hinges, handles and even door bumper details, whilst even the sliding window ventilators are discernible. Footboards are present on the solebars below each door whilst the underframe sports a full complement of equipment, with the truss rod frames modelled in all their glory and flanked by battery boxes, vacuum cylinders, dynamo and, where appropriate, other auxiliary equipment. The bogies are fitted with metal wheelsets, whilst the standard tension lock coupling is attached via a NEM coupling pocket to the close coupling mechanism that is fitted to the carriage floor, which operates in tandem with the bogie. Inside each model is an interior featuring the prototypical layout of tables and chairs, whilst the icing on the cake is the livery application, using authentic colours, logos and fonts to give every model an exquisite appearance. Features: Pristine BR Blue & Grey livery Running No. M3116 Commonwealth Bogies End Steps Removed Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 270mm (over couplings) - Era 6 - OO Scale

Bachmann Class 69 69003 'The Railway Observer' GBRf (OO)

Class 69 69003 'The Railway Observer' GBRf  The real Class 69 Diesel Locomotives have been created for GBRf through the conversion of redundant Class 56s and we are delighted to present this Bachmann Branchline OO scale model of Britain’s newest mainline diesel. Produced under an exclusive agreement with GBRf, the Branchline model has been painstakingly developed hand-in-hand with the introduction of the GBRf fleet. With the Class 69s being built from donor locomotives that were first built by three different works and have themselves seen almost fifty years of use and modification, Bachmann has worked closely with GBRf to accommodate any detail differences that were present on the donors and have remained apparent on the rebuilt machines, along with any changes made to the final design of the Class 69 during the ongoing build programme. This diligent approach has resulted in a truly magnificent model which befits the Branchline name, capturing the Class 56 shape to a tee alongside the modern adornments and many changes made to the locomotives to create the 69s. The bodyshell features crisp, accurate mouldings to depict the main features along with separately fitted parts, including etched bodyside and roof fan grilles, metal windscreen wipers and separately fitted driver’s door handrails. Inside the cab there is interior detailing which will be decorated appropriately whilst machine room detailing is visible through the bodyside grilles. The underframe equipment is all present and correct, composed of many separate parts along with sandboxes and sandpipes and sprung metal buffers, but it is the bogies that really bring this model to life. It’s hard to describe these as anything but a work of art, using countless separate components to model every aspect of the bogie in full relief, from the brakes to the suspension, even down to the separately fitted bogie-body securing chains. All of this detail, both inside and out, will be brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos and with the help of GBRf official livery diagrams. Under the body, the Branchline Class 69 features our proven drive system using a 5 pole motor with twin flywheels driving all axles on each bogie. Electrical pick-up comes from all wheels whilst DCC provision comes in the form of a Plux22 interface. Directional lighting is of course provided, along with cab and machine room lighting when used on DCC. Whilst every model comes with a pre-fitted speaker, for those looking for sound then our SOUND FITTED and SOUND FITTED DELUXE variants with their Dual Fitted XL Speaker System is the obvious choice. Talking of SOUND FITTED DELUXE, opt for our top of the range model and you can enjoy the additional features of motorised radiator fans and DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine GBRf livery Running No. 69003 Named 'The Railway Observer' Etched Nameplates included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities Bogies constructed from multiple components featuring full relief detail Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker Fitted – a pre-fitted speaker is included with every model as standard - Era 9 - OO Scale

Bachmann Class 69 69005 'Eastleigh' GBRf BR Green (SF Deluxe) (OO)

Class 69 69005 'Eastleigh' GBRf BR Green (SF Deluxe) The real Class 69 Diesel Locomotives have been created for GBRf through the conversion of redundant Class 56s and we are delighted to present this Bachmann Branchline OO scale model of Britain’s newest mainline diesel. Produced under an exclusive agreement with GBRf, the Branchline model has been painstakingly developed hand-in-hand with the introduction of the GBRf fleet. With the Class 69s being built from donor locomotives that were first built by three different works and have themselves seen almost fifty years of use and modification, Bachmann has worked closely with GBRf to accommodate any detail differences that were present on the donors and have remained apparent on the rebuilt machines, along with any changes made to the final design of the Class 69 during the ongoing build programme. This diligent approach has resulted in a truly magnificent model which befits the Branchline name, capturing the Class 56 shape to a tee alongside the modern adornments and many changes made to the locomotives to create the 69s. The bodyshell features crisp, accurate mouldings to depict the main features along with separately fitted parts, including etched bodyside and roof fan grilles, metal windscreen wipers and separately fitted driver’s door handrails. Inside the cab there is interior detailing which will be decorated appropriately whilst machine room detailing is visible through the bodyside grilles. The underframe equipment is all present and correct, composed of many separate parts along with sandboxes and sandpipes and sprung metal buffers, but it is the bogies that really bring this model to life. It’s hard to describe these as anything but a work of art, using countless separate components to model every aspect of the bogie in full relief, from the brakes to the suspension, even down to the separately fitted bogie-body securing chains. All of this detail, both inside and out, will be brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos and with the help of GBRf official livery diagrams. Under the body, the Branchline Class 69 features our proven drive system using a 5 pole motor with twin flywheels driving all axles on each bogie. Electrical pick-up comes from all wheels whilst DCC provision comes in the form of a Plux22 interface. Directional lighting is of course provided, along with cab and machine room lighting when used on DCC. Whilst every model comes with a pre-fitted speaker, for those looking for sound then our SOUND FITTED and SOUND FITTED DELUXE variants with their Dual Fitted XL Speaker System is the obvious choice. Talking of SOUND FITTED DELUXE, opt for our top of the range model and you can enjoy the additional features of motorised radiator fans and DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Green (Late Crest) (GBRf) livery Running No. 69005 Named 'Eastleigh' Etched Nameplates included SOUND FITTED – Fitted with a ESU V5DCC Sound Decoder Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities Bogies constructed from multiple components featuring full relief detail Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker Fitted – a pre-fitted speaker is included with every model as standard - Era 9 - OO Scale

Bachmann Class 69 69001 'Mayflower' GBRf (UK & US Flags) (OO)

Class 69 69001 'Mayflower' GBRf (UK & US Flags) The real Class 69 Diesel Locomotives have been created for GBRf through the conversion of redundant Class 56s and we are delighted to present this Bachmann Branchline OO scale model of Britain’s newest mainline diesel. Produced under an exclusive agreement with GBRf, the Branchline model has been painstakingly developed hand-in-hand with the introduction of the GBRf fleet. With the Class 69s being built from donor locomotives that were first built by three different works and have themselves seen almost fifty years of use and modification, Bachmann has worked closely with GBRf to accommodate any detail differences that were present on the donors and have remained apparent on the rebuilt machines, along with any changes made to the final design of the Class 69 during the ongoing build programme. This diligent approach has resulted in a truly magnificent model which befits the Branchline name, capturing the Class 56 shape to a tee alongside the modern adornments and many changes made to the locomotives to create the 69s. The bodyshell features crisp, accurate mouldings to depict the main features along with separately fitted parts, including etched bodyside and roof fan grilles, metal windscreen wipers and separately fitted driver’s door handrails. Inside the cab there is interior detailing which will be decorated appropriately whilst machine room detailing is visible through the bodyside grilles. The underframe equipment is all present and correct, composed of many separate parts along with sandboxes and sandpipes and sprung metal buffers, but it is the bogies that really bring this model to life. It’s hard to describe these as anything but a work of art, using countless separate components to model every aspect of the bogie in full relief, from the brakes to the suspension, even down to the separately fitted bogie-body securing chains. All of this detail, both inside and out, will be brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos and with the help of GBRf official livery diagrams. Under the body, the Branchline Class 69 features our proven drive system using a 5 pole motor with twin flywheels driving all axles on each bogie. Electrical pick-up comes from all wheels whilst DCC provision comes in the form of a Plux22 interface. Directional lighting is of course provided, along with cab and machine room lighting when used on DCC. Whilst every model comes with a pre-fitted speaker, for those looking for sound then our SOUND FITTED and SOUND FITTED DELUXE variants with their Dual Fitted XL Speaker System is the obvious choice. Talking of SOUND FITTED DELUXE, opt for our top of the range model and you can enjoy the additional features of motorised radiator fans and DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine GBRf (UK & US Flags) livery Running No. 69001 Named ‘Mayflower’ Etched Nameplates included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities Bogies constructed from multiple components featuring full relief detail Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker Fitted – a pre-fitted speaker is included with every model as standard - Era 9 - OO Scale

Bachmann Class 69 69002 'Bob Tiller CM&EE' GBRf BR Blue Large Logo (OO)

Class 69 69002 'Bob Tiller CM&EE' GBRf BR Blue Large Logo The real Class 69 Diesel Locomotives have been created for GBRf through the conversion of redundant Class 56s and we are delighted to present this Bachmann Branchline OO scale model of Britain’s newest mainline diesel. Produced under an exclusive agreement with GBRf, the Branchline model has been painstakingly developed hand-in-hand with the introduction of the GBRf fleet. With the Class 69s being built from donor locomotives that were first built by three different works and have themselves seen almost fifty years of use and modification, Bachmann has worked closely with GBRf to accommodate any detail differences that were present on the donors and have remained apparent on the rebuilt machines, along with any changes made to the final design of the Class 69 during the ongoing build programme. This diligent approach has resulted in a truly magnificent model which befits the Branchline name, capturing the Class 56 shape to a tee alongside the modern adornments and many changes made to the locomotives to create the 69s. The bodyshell features crisp, accurate mouldings to depict the main features along with separately fitted parts, including etched bodyside and roof fan grilles, metal windscreen wipers and separately fitted driver’s door handrails. Inside the cab there is interior detailing which will be decorated appropriately whilst machine room detailing is visible through the bodyside grilles. The underframe equipment is all present and correct, composed of many separate parts along with sandboxes and sandpipes and sprung metal buffers, but it is the bogies that really bring this model to life. It’s hard to describe these as anything but a work of art, using countless separate components to model every aspect of the bogie in full relief, from the brakes to the suspension, even down to the separately fitted bogie-body securing chains. All of this detail, both inside and out, will be brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos and with the help of GBRf official livery diagrams. Under the body, the Branchline Class 69 features our proven drive system using a 5 pole motor with twin flywheels driving all axles on each bogie. Electrical pick-up comes from all wheels whilst DCC provision comes in the form of a Plux22 interface. Directional lighting is of course provided, along with cab and machine room lighting when used on DCC. Whilst every model comes with a pre-fitted speaker, for those looking for sound then our SOUND FITTED and SOUND FITTED DELUXE variants with their Dual Fitted XL Speaker System is the obvious choice. Talking of SOUND FITTED DELUXE, opt for our top of the range model and you can enjoy the additional features of motorised radiator fans and DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Blue (Large Logo) (GBRf) livery Running No. 69002 Named 'Bob Tiller CM&EE' Etched Nameplates included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities Bogies constructed from multiple components featuring full relief detail Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker Fitted – a pre-fitted speaker is included with every model as standard - Era 9 - OO Scale

Bachmann Class 69 69002 'Bob Tiller CM&EE' GBRf LL (SF Deluxe) (OO)

Class 69 69002 'Bob Tiller CM&EE' GBRf BR Blue Large Logo (SF Deluxe) The real Class 69 Diesel Locomotives have been created for GBRf through the conversion of redundant Class 56s and we are delighted to present this Bachmann Branchline OO scale model of Britain’s newest mainline diesel. Produced under an exclusive agreement with GBRf, the Branchline model has been painstakingly developed hand-in-hand with the introduction of the GBRf fleet. With the Class 69s being built from donor locomotives that were first built by three different works and have themselves seen almost fifty years of use and modification, Bachmann has worked closely with GBRf to accommodate any detail differences that were present on the donors and have remained apparent on the rebuilt machines, along with any changes made to the final design of the Class 69 during the ongoing build programme. This diligent approach has resulted in a truly magnificent model which befits the Branchline name, capturing the Class 56 shape to a tee alongside the modern adornments and many changes made to the locomotives to create the 69s. The bodyshell features crisp, accurate mouldings to depict the main features along with separately fitted parts, including etched bodyside and roof fan grilles, metal windscreen wipers and separately fitted driver’s door handrails. Inside the cab there is interior detailing which will be decorated appropriately whilst machine room detailing is visible through the bodyside grilles. The underframe equipment is all present and correct, composed of many separate parts along with sandboxes and sandpipes and sprung metal buffers, but it is the bogies that really bring this model to life. It’s hard to describe these as anything but a work of art, using countless separate components to model every aspect of the bogie in full relief, from the brakes to the suspension, even down to the separately fitted bogie-body securing chains. All of this detail, both inside and out, will be brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos and with the help of GBRf official livery diagrams. Under the body, the Branchline Class 69 features our proven drive system using a 5 pole motor with twin flywheels driving all axles on each bogie. Electrical pick-up comes from all wheels whilst DCC provision comes in the form of a Plux22 interface. Directional lighting is of course provided, along with cab and machine room lighting when used on DCC. Whilst every model comes with a pre-fitted speaker, for those looking for sound then our SOUND FITTED and SOUND FITTED DELUXE variants with their Dual Fitted XL Speaker System is the obvious choice. Talking of SOUND FITTED DELUXE, opt for our top of the range model and you can enjoy the additional features of motorised radiator fans and DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Blue (Large Logo) (GBRf) livery Running No. 69002 Named 'Bob Tiller CM&EE' Etched Nameplates included SOUND FITTED – Fitted with a ESU V5DCC Sound Decoder Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities Bogies constructed from multiple components featuring full relief detail Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker Fitted – a pre-fitted speaker is included with every model as standard - Era 9 - OO Scale

Bachmann Class 121 Single-Car DMU 55022 BR NSE (Original)

Class 121 Single-Car DMU 55022 BR Network SouthEast (Original) 55022 Detail Variations Specific To This Model: Unit is Preserved Pristine BR Network SouthEast (Original) Livery Running No. 55022 Destination Blinds for Ealing Broadway and Greenford Original Cab Fronts with Marker/Tail Lights Plated Headcode Boxes Shortened Cab Handrails Round Buffers Exhausts with Small Silencers Leyland 680 L Engine Bodyside Heater Louvres Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 278mm Three pole motor and flywheel providing drive to the bogie at the guard’s compartment end Two axle drive Separate metal bearings fitted to each driven axle Trailing axles run in metal pinpoint bearings Electrical pickup from all wheels Diecast metal, multi-stage gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each bogie Designed to operate on curves of second radius (438mm) or greater Separately applied detail parts, including metal lamp irons and cab end handrails, exhaust pipes and windscreen wipers Bogies constructed from multiple components featuring brake and suspension detail and steps where prototypically appropriate Speedometer with flexible connection between bogie and solebar A wealth of separately fitted underframe components including engines, exhaust systems, electrical gear and auxiliary equipment Interior detailing including seating, partitions and driver’s chair and control desk in each cab Sprung metal buffers Each model is supplied with a full set of decorated bufferbeam pipework and accessory parts Directional lighting, including illuminated headcode panels* and high intensity headlights*, switchable on/off independently at either end via the chassis-mounted switches or via dedicated DCC functions (*where applicable to the prototype being modelled) Separately illuminated destination panels, switchable on/off independently at either end via the chassis-mounted switches or via dedicated DCC functions Passenger saloon lighting – switchable on/off via the chassis-mounted switches or via a dedicated DCC function Cab interior lighting – switchable on/off via the chassis-mounted switches or via a dedicated DCC function Authentic light colours and temperatures selected for each lighting application A quality speaker employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTEDversions Sound files produced specifically for the Bachmann Branchline Class 121 DMU using recordings from real units The Class 121 single-car Diesel Multiple Unit (DMU) is Bachmann Branchline’s flagship First Generation multiple unit, equalled only by its 3-car Class 117 stablemate. Employing cutting edge technology, these high fidelity models boast a wealth of detail and era-specific options to depict specific railcars at various points during their working careers which, for some, extended towards 60 years in service. Returning to the Branchline range in a selection of new liveries, these iconic suburban DMUs will make a fine addition to any model railway set in the steam-diesel transition period onwards. Capturing the look and character of the prototype, this Class 121 is adorned with many separate detail components whilst underneath the engine, drive gear and auxiliary equipment is all depicted faithfully. It may be hard to believe, but within these components and integrated into the underframe is hidden the drive mechanism, which is totally invisible with no intrusion into the interior of the model. Talking of the interior and the fine detail extends inside the model too, complete with prototypical decoration. The livery application is executed to a high standard both inside and out, using accurate colours and authentic fonts, typefaces and logos to stunning effect. Driven by the low profile mechanism, the technology continues with the lighting suite which includes directional lights, interior cab and passenger saloon lights, and Illuminated headcode boxes and destination blinds, all of which can be enjoyed by analogue users – controlled with the under-chassis switches – or via dedicated functions on DCC. With a Plux22 DCC decoder socket and pre-fitted speaker. - Era 8 - OO Scale

Bachmann LNER Thompson Full Brake BR Blue E105E

LNER Thompson Full Brake BR Blue E105E New Tooling has been developed to expand the Bachmann Branchline range of LNER Thompson Coaches with this Full Brake vehicle. Used to transport parcels and luggage, this vehicle is an ideal complement to a passenger train or could be marshalled as part of a dedicated parcels train operating across the LNER network and into bordering regions. Features: Pristine BR Blue livery Running No. E105E Accessory Pack NEM Coupling Pockets Close Coupling Mechanism Length 264mm - Era 6 - OO Scale

Bachmann Class 31/4 Refurbished 31407 - Mainline Freight

Class 31/4 Refurbished 31407 - Mainline Freight The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine Mainline Freight Blue livery Running No. 31407 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 45 SC H/C D49 'The Manchester Regiment' BR Green (SYP)

Class 45 Split Centre H/C D49 'The Manchester Regiment' BR Green (SYP) The Bachmann Branchline model combines a finely-proportioned bodyshell with extensive detailing throughout, including separately fitted cab handrails, windscreen wipers, lamp brackets and sandpipes. With a powerful 5-pole motor fitted with twin flywheels which drives both bogies, these models have plenty of pulling power to haul even the longest trains. With a 21 Pin DCC decoder interface, it’s easy to add a decoder or sound decoder and speaker for use on DCC Features: Pristine BR Green (Small Yellow Panels) livery Running No. D49 Named ‘The Manchester Regiment’ Etched Nameplates included Split Centre Headcode Panels displaying headcodes 1C58 and 1N78 NEM Coupling Pockets Sprung Buffers Powerful 5 Pole Motor with Twin Flywheels Detailed Cab Interior with pre-fitted Driver in one cab Directional Lighting Locomotive Ready to Accept a Speaker Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – recommended Decoder item No. 36-557A Length 275mm - Era 5 - OO Scale

Bachmann Class 46 Centre Headcode D138 BR Green (SYP)

Class 46 Centre Headcode D138 BR Green (Small Yellow Panels) The Bachmann Branchline model combines a finely-proportioned bodyshell with extensive detailing throughout, including separately fitted cab handrails, windscreen wipers, lamp brackets and sandpipes. With a powerful 5-pole motor fitted with twin flywheels which drives both bogies, these models have plenty of pulling power to haul even the longest trains. With a 21 Pin DCC decoder interface, it’s easy to add a decoder or sound decoder and speaker for use on DCC Features: Pristine BR Green (Small Yellow Panels) livery Running No. D138 Centre Headcode Panels displaying headcodes 1M67 and 1N37 NEM Coupling Pockets Sprung Buffers Powerful 5 Pole Motor with Twin Flywheels Detailed Cab Interior with pre-fitted Driver in one cab Directional Lighting Locomotive Ready to Accept a Speaker Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – recommended Decoder item No. 36-557A Length 275mm - Era 5 - OO Scale

Bachmann Class 31/1 Refurbished 31149 BR Railfreight (RS) - Sound Fitted

Class 31/1 Refurbished 31149 BR Railfreight (Red Stripe) - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight (Red Stripe) livery Running No. 31149 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31180 BR Railfreight (RS) - Sound Fitted

Class 31/1 Refurbished 31180 BR Railfreight (Red Stripe) - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight (Red Stripe) livery Running No. 31180 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31304 BR Railfreight (PS) - Sound Fitted

Class 31/1 Refurbished 31304 BR Railfreight Petroleum Sector - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight Petroleum Sector livery Running No. 31304 Etched Depot Plaque and BR Double Arrow Included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/1 Refurbished 31319 BR Railfreight (PS) - Sound Fitted

Class 31/1 Refurbished 31319 BR Railfreight Petroleum Sector - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Railfreight Petroleum Sector livery Running No. 31319 Etched Depot Plaque and BR Double Arrow Included Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Modified Main Fan Grilles with Vertical Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31407 Mainline Freight - Sound Fitted

Class 31/4 Refurbished 31407 Mainline Freight - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine Mainline Freight Blue livery Running No. 31407 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31407 Mainline Freight Deluxe SoundFitted

Class 31/4 Refurbished 31407 Mainline Freight - Deluxe Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine Mainline Freight Blue livery Running No. 31407 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips NRN Radio Pods Roof Fan Grille with ‘Top Hat’ Electric Train Heating (ETH) Fitted High Intensity Headlights - Era 8 - OO Scale

Bachmann Class 31/4 Refurbished 31435 BR Blue - Sound Fitted

Class 31/4 Refurbished 31435 BR Blue - DCC Sound Fitted The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counterparts from Graham Farish, these new OO scale models have all the hallmarks of the Branchline Class 37 & 47 locomotives and more. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30/31 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an unprecedented array of lighting features, our Dual Fitted speaker system is fitted to all models – bringing to life our SOUND FITTED models. For the ultimate experience, choose one of our SOUND FITTED DELUXE models with their motorised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System! Features: Pristine BR Blue livery Running No. 31435 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 228mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all outer wheels on each bogie Designed to operate on curves of second radius (438mm) or greater Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only) Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Engine Room lighting* Single or win red tail lights (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Two quality speakers employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine) Detail Variations Specific To This Model: Refurbished Body Gangway Doors Plated Plated Headcode Panels fitted with Marker Lights Windscreen Washer Jets with Covers Bufferbeam Cowling Removed Original Windscreen Original Main Fan Grilles with Horizontal Fins English Electric Engine Exhaust Ports English Electric Engine Block Detail Plated Boiler Port Plated Water Filler Hatch Plated Bodyside Steps Battery Boxes with Additional Safety Clips Electric Train Heating (ETH) - Era 8 - OO Scale  

Bachmann Class 37/0 Centre Headcode 37371 BR Railfeight (RS) DCC Sound

Class 37/0 Centre Headcode 37371 BR Railfeight (Red Stipe) DCC Sound Fitted The British Rail Class 37 is a favourite among enthusiasts and modellers alike and, having been a firm fixture in the Bachmann Branchline OO scale range for many years, in 2022 an all-new model of this iconic locomotive was launched. Built to unprecedented levels of accuracy and fidelity, the new Branchline model incorporates the latest technology and shares many common features and specifications with the award winning Bachmann Branchline Class 47. Finished in BR Railfreight Red Stripe livery, this Class 37/0 depicts No. 37371 and is supplied complete with SOUND FITTED. Following in the footsteps of the Class 47, our all-new OO scale Class 37 has been designed from the rails up to ensure this classic locomotive is modelled in all its glory. With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new 37 is brought to life with an exquisite livery application using true-to-prototype colours, fonts and logos. Along with an exceptional array of lighting features, our Dual Fitted speaker system is fitted to all models bringing this SOUND FITTED model to life. FEATURES: Pristine BR Railfreight (Red Stripe) livery Running No. 37371 SOUND FITTED - Fitted with a Zimo MS450P22 DCC Sound Decoder Length 245mm DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Central Headcode Panels – Plated and fitted with Marker Lights Headboard Clips High Intensity Headlight Bufferbeam Valance Removed Coupling Bash Plate Oval Buffers Original Windscreen English Electric Cantrail Grilles Welded Boiler Roof Blanked Boiler Port and Safety Valves Sealed Water Filler Door and Plated Access Steps Fabricated Bogies Original Speedo Drive Twin Fuel Tanks with Ex-Water Tank Gauges Plated Over - Era 8 - OO Scale