Scale Model Scenery Wright's Lock-Up – Laser-cut kit (OO)

Wright's Lock-Up – Laser-cut kit Wright's Lockup is a small but perfectly formed, versatile OO gauge / 1:76 scale lockup / stores building suitable for industrial, town or harbourside scenes. Based on a real life protoype in Penzance, Cornwall, the building features heavily weathered Flemish Bond brickwork with wooden doors, sash windows, slate roof & downspouts. The side wall also features an optional ghost sign for Wright's Electrical, Hot Water & Sanitary Engineers which would have been the local plumbers & electricians back in the good old days. Also included is an alternative set of buff stone wraps which can be used to give the building a more rural feel.  The kit is supplied with laser-cut parts for ease of assembly and comes with fully weathered paper wraps and roof slates, with no additional painting or weathering required on the main components for a "Realistically Better" finish straight from the pack. The window & doors are supplied laser-cut from our eco-friendly laserboard and are packed with detail including engraved planks, hinges and locks. These will require painting with acrylic paints prior to assembly or colouring with suitable markers. We used a Plastikote Stone color for our test build which we then coated lightly with ground pastels to weather them down for a little less prestine finish. The building consists of two floors and features interior wall wraps for both the brick and stone versions, with white wash & flaking paint for added realism. Ceiling and floor details are also included for the upper floor. There's also plenty of scope for customisation too... with the slates being applied in individual strips it's easy to build it in either pristine or derelict condition (or anywhere in between). And with care, you can also pose the doors open or closed. Features: Fully weathered photo-realistic old stone or brick walls & roof slates - main structure requires no painting to acheive a realistically better finish Stone & brick wall interior detailing included Doors can be posed open or closed MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 78mm x W: 42mm x H: 72mm - OO Scale

Scale Model Scenery Weathered Asphalt Texture Paper (Pk of 5) (OO)

Weathered Asphalt Texture Paper (Pk of 5) A pack of 5 unique A4 sheets (210mm x 297mm) of photo-realistic, weathered asphalt paper sheets. Ideal for use when scratch-building yards, car parks, forecourts and more on your OO gauge model railway layouts and 1:76 scale dioramas. The pack comprised of 5 uniquely weathered sheet with an assortment of cracks and patched asphalt etc. Can be easily cut to size and glued onto your chosen surface (MDF, card, plywood etc) using UHU, Pritt Stick or Deluxe Materials View Glue. - OO Scale

Scale Model Scenery Stoney's Workshops – Laser-cut kit (OO)

Stoney's Workshops – Laser-cut kit A versatile OO gauge / 1:76 scale set of 3 laser cut workshop buildings which can be configured in a number of arrangements to suit your requirements. Based on a real life building near to our factory, Stoney's Workshops feature lots of detail and realism captured from the prototype. A mix of a double entrance long workshop with sliding doors, two storey workshop with double, hinged doors to the side and single, hinged personnel door to the front, then a smaller, lean-to style workshop with single, hinged personnel door on the end. There's also the option to build the windows glazed or boarded up, plus guttering and downpipes for added detail. The walls are finished in pre-weathered grey render wraps with lots of added realism including staining, cracks and algae. Interior textures are also provided, finished in worn whitewashed brick, again with a variety of stains and discolouration. Once assembled, the buildings can be arranged however you wish; in a cluster configured to suit your needs, or as individual buildings dotted around your layout or diorama. The kit is straightforward to assemble with paper texture wraps over a series of MDF layers which leave no unsightly visible when construction is complete. Some very small parts are used on the sliding doors, so tweezers are definitely recommended. An additional pair of hinged doors & frames are also included for those that don't fancy the challenge of the sliding doors. - OO Scale

Scale Model Scenery Polsue Stables/Stores – Laser-cut kit (OO)

Stables/Stores – Laser-cut kit A versatile OO gauge / 1:76 scale stables / stores building suitable for farm, railway or industrial use. The design is typical of many buildings of this type that can still be seen all over the British Isles, with stone/brick walls & slate roof. The kit is supplied with laser-cut parts for ease of assembly and comes with fully weathered paper wraps and roof slates, with no additional painting or weathering required for a "Realistically Better" finish straight from the pack. The windows & vent are supplied laser-cut from our eco-friendly laserboard and are packed with detail including engraved planks, hinges and locks. The building consists of two rooms; the main stable & tack room. An alternative solid door is also included to replace the split, stable door if the building is to be used as a stores rather than for horses. And all interior walls feature stone wall detail enabling you to easily detail the interior and pose any of the doors part of fully open. Doors & other woodwork require painting before the kit is assembled which can be done with solvent or acrylic based paints. We used a Plastikote Stone color for our test build which we then dry-brushed with burnt sienna, white & slate grey artists acrylics to create a weathered wood look. There's also plenty of scope for customisation too... with the slates being applied in individual strips it's easy to build it in either pristine or derelict condition (or anywhere in between). Features: Fully weathered photo-realistic old stone or brick walls & roof slates - main structure requires no painting to acheive a realistically better finish Stone & brick wall interior detailing included Doors can be posed open or closed MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 77.6mm x W: 43mm x H: 42mm  - OO Scale

Scale Model Scenery Pre-Weathered Laser Cut Roof Slates – Laser-cut kit (OO)

Pre-Weathered Laser Cut Roof Slates – Laser-cut kit An A4 sheet of pre-weathered, laser cut roof slates, ready to apply to the roofs of your model buildings. These laser cut, pre-weathered slate roofing strips are the fastest way for the discerning modeller to create a realistic roof on a model building. No painting or weathering required. Simply release the strips from the card sheet, trim & glue into place... Job done! Our OO gauge roof tiles are based off the real life equivalent allowing you to build a realistic roof which is accurate. These tiles are sturdy but can be manipulated meaning you can get your roof exactly how you want it. Assembly is easy due to the pre-cut nature, saving you stress and time.  A single pack covers a roof area approximately 280mm x 115mm, and includes three ridge strips as well as wider slates for the ends of every other run, to give an incredibly realistic finish with no fuss. - OO Scale

Scale Model Scenery Old Dairy – Laser-cut kit (OO)

Old Dairy – Laser-cut kit  Based on a real old dairy building situated in Grampound, a little village between Truro and St Austell, this building will look at home on any layout regardless of the era or region you're modelling. The kit is supplied with pre-weathered paper texture wraps to give a realistically better finish straight from the packet. And components apart from the paper wraps are supplied pre-cut for ease of assembly. The windows & doors are supplied laser-cut from our eco-friendly laserboard and are loaded with lots detail including engraved planks, hinges and locks (separately applied - so they are tiny!). There's also a choice between a "slatted gate" style door for the arched doorway or a solid wooden arch topped door. Separately applied downpipes add an extra finishing touch. The building consists of two main "rooms": Main dairy / stores and the the lean-to to the left hand side. A full set of interior wraps are also included so you can pose any of the doors or shutters open should you wish. Doors & window frames on this OO gauge dairy kit require painting before the kit is assembled which can be done with solvent or acrylic based paints. We used a Plastikote Stone colour which we then dry-brushed with burnt sienna, white & slate grey artists acrylics to create a weathered wood look. There is an abundance of opportunities for customization with this oo gauge building kit. The slates are applied in individual strips, making it effortless to construct a pristine or derelict appearance, or anything in between. Features: Fully weathered photo-realistic old stone walls & roof slates - main structure requires no painting to acheive a realistically better finish Stone wall interior detailing included Doors can be posed open or closed MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 102mm x W: 56mm x H: 80mm  - OO Scale

Scale Model Scenery Lightly Weathered Roof Slates – Laser-cut kit (OO)

Lightly Weathered Roof Slates – Laser-cut kit An A4 sheet of lightly weathered, laser cut roof slates, ready to apply to the roofs of your model buildings. These laser cut, pre-weathered slate strips are the fastest way for the discerning modeller to create a realistic roof on a model building. No painting or weathering required. Simply release the strips from the card sheet, trim & glue into place... Job done! A single pack covers a roof area approximately 280mm x 115mm, and includes three ridge strips as well as wider slates for the ends of every other run, to give an incredibly realistic finish with no fuss. Key Features: Pre-weathered finish, with lichen & moss effect. Three rows of ridge tiles Extra-wide slates for the ends of every other row. Perfect for any OO / 1:76 / 4mm model railway layout or diorama. Compatible with all makes of OO gauge model railway. Supplied with easy to follow instructions, in a cellophane packet.. Area covered by a single pack approx: 280mm x 115mm Individual strip length: 280mm - OO Scale

Scale Model Scenery Farmhouse – Laser-cut kit (OO)

Farmhouse – Laser-cut kit Based on a number of real examples around the UK this versatile OO gauge farm house kit can be assembled as either a pristine building, derelict, or anywhere in between and has lots of scope for kit-bashing Supplied with a choice of brick & stone paper wraps for the walls plus laser-cut pre-weathered roof slates, and super-realistic windows & doors you can really go to town customising this OO gauge farm house to fit perfectly into your layout. A detailed front doorway adds an extra level of realism to our OO gauge farm house kit, creating a grand entrance to the farm house, and the rear porch gives the farmer somewhere to remove his filthy wellington boots before he enters the main house. The model features lots of laser cut detail including roof slates & fully detailed windows and doors for a very realistic finish once assembled. Doors, window frames, guttering, front porch surround and chimney tops require painting before the kit is assembled which can be done with solvent or acrylic based paints. - OO Scale

Scale Model Scenery Garden Sheds – Laser-cut kit (2Pk) (OO)

Garden Sheds – Laser-cut kit A laser-cut model kit to build two small OO gauge garden sheds for allotments and garden scenes on your model railway layout or diecast diorama. Easy to assemble with full instructions supplied. Can be painted and weathered as required with acrylic paints or real wood stain / preserver. Features engraved detail for ship-lap cladding, hinges and lock. Printed paper felt texture for roof also included.  Features: Kit builds two sheds Dimensions: L: 26mm x W: 22mm x H: 27mm Step By Step Photographic instructions included Deluxe Materials Laser Cut Kit Glue recommended - OO Scale

Scale Model Scenery Dutch Barn – Laser-cut kit (OO)

Dutch Barn – Laser-cut kit A versatile OO gauge dutch barn laser cut building kit, suitable for any farm scene on your OO scale model railway layout or can be repurposed as a saw mill, stores or goods shed for railway or industrial use. The design is typical of steel framed Dutch Barns seen all over the British Isles, with detailed steel frame and rusty, black painted corrugated iron. Based on a real Dutch Barn down on the Roseland, not far from our factory, this barn captures the essence of a traditional barn that's been exposed to the elements for many years. The walls of the OO gauge barn are finished with our unique TX104-OO rusty, painted corrugated iron texture for a realistically better finish straight from the pack. And the base is wrapped in weathered concrete paper. All textures are supplied pre-weathered, only the framework will need painting & weathering. We used a dark brown acrylic spray then brushed it over with rust coloured weathering powder while the paint was still a little tacky. And components apart from the paper wraps are supplied pre-cut for ease of assembly. The barn isn't really suitable for a beginner as there are some small, delicate parts. But if you take your time with the assembly you will be rewarded with a very detailed building once complete. There is an abundance of opportunities for customization with this oo gauge building kit. You can leave either end wall off, leaving one side and one end open for a more derelict look (or more accessible stores / saw mill building). Features Fully weathered photo-realistic rusty black painted corrugated iron walls for a realistically better finish Unpainted, weathered corrugated iron interior finish MDF & Laserboard pre-cut components to simplify construction Dimensions: L: 190mm x W: 88mm x H: 86mm  - OO Scale

Scale Model Scenery Coach House & Stables – Laser-cut kit (OO)

Coach House & Stables – Laser-cut kit This OO gauge coach house & stables laser cut building kit is ideal for virtually any era model railway layout or 1:76 scale diecast diorama. Ideal for rural and country scenes as a coach house, or it can of course be repurposed as an industrial building or even as a dockside fisherman's cottage with attached boat storage and net loft. It's really up to you how you use it and the options are endless. The coach house & stables features lots of detail such as hinge overlays on the doors, layered, glazed windows, pre-weathered roof slates, painted white stone wall wraps with brick arches. Soot stained chimneys and separately applied drainpipes complete the realistically better finish. There's even the prototypical uneven roofline, just like you see on many older buildings constructed with detailed roof trusses for authenticity. The roof slates are cut to length and pre-weathered with lots of lichen and staining. Simply glue them on to the marked trusses to create a super-realistic roof. The central larger carriage store is separated from the stables & accommodation via internal walls. These sections also feature a floor between the ground floor and the upper floor, allowing you to go to town with interior detailing on these sections. No interior wraps are supplied for these sections. We've also included an optional solid wooden door which you can use in place of the stable door, making it more suitable for use as an industrial workshop with store room and office. Or fisherman's cottage with workshop/boat store and net loft. The kit is straightforward to assemble with paper texture wraps over a series of MDF base layers which leave no unsightly joints visible when construction is complete. As with many of our kits, there are some small, delicate parts in the kit, so tweezers are definitely recommended.  You will need to paint the doors, windows, guttering and downpipes etc as these are supplied unpainted. Artists acrylic paints or "rattle can" spray paints are recommended prior to assembly. Some of the larger unpainted parts can be easily coloured with a simple permanent marker. Features: Fully weathered finish for a Realistically Better finish Laser cut MDF core parts for quick and easy construction Weathered whitewashed walls & pre-weathered roof slates No visible cut edges when complete Step by Step photographic instructions included. Full colour texture layers printed onto 100gsm photo-quality laser paper Dimensions: L:193mm x W: 70mm x H: 100mm Main double doorway opening dimensions: W: 36mm  X H (side of doorway): 38mm X H (to top of the center arch) 42mm - OO Scale

Scale Model Scenery 4ft Fence Posts (pre-drilled) – Laser-cut kit (OO)

4ft Fence Posts (pre-drilled) – Laser-cut kit A pack of 44 laser cut birch plywood fence posts for making your own post and wire fencing. These are the same posts we supply with our LX056-OO Post & Wire Fencing kit, just without the wire! Each post stands approx 16mm tall once installed, and has 4 holes pre-drilled to accept wires. Simply drill a row of 2.5mm holes at approximately 24mm spacing. Glue the posts into place, then thread with your choice of wire, fishing line or thread. The fence posts can then be easily weathered if required using artists acrylics or weathering powders. Features: 44 Laser Cut Birch Plywood fence posts. Sturdy and durable. Perfect for any era OO / 1:76 / 4mm model railway layout or diorama. Compatible with all makes of OO gauge model railway. Supplied with easy to follow instructions, in a cellophane packet. Post Dimensions: D: 1.5mm x W: 1.5mm x H: 16mm (Installed) - OO Scale

Scale Model Scenery 4ft Post & Wire Fencing – Laser-cut kit (OO)

4ft Post & Wire Fencing – Laser-cut kit Post & Wire lineside model railway fencing offers a quick, simple & low cost method for detailing your lineside model railway & diorama scenes. In real life, it's a simple way for farmers to keep livestock away from busy railway lines. Employed all over the UK, for many many years, this easy to install laser cut OO scale kit will look right at home on any model railway layout or diecast diorama. And with real wood fence posts, it looks just the job straight from the packet. Simple to build, making up to 1 metre of fencing from a single pack. Simply drill a row of 2.5mm holes at approximately 24mm spacing. Glue the posts into place, then thread the included wire through the posts and secure with a little glue. The fence posts and wire can then be easily weathered if required using artists acrylics. Features: 44 Laser Cut Birch Plywood model railway fence posts. 4m of stiff wire included - kink resistant for easy installation. Straightforward assembly with step by step instructions. Sturdy and durable. Perfect for any era 1:76 scale model diorama & OO gauge model railway. Compatible with all makes of 1:76 scale model railway accessories Supplied with easy to follow instructions, in a cellophane packet. Post Dimensions: D: 1.5mm x W: 2mm x H: 16mm (Installed) - OO Scale

Scale Model Scenery 3ft x 2ft Paving Slabs – Laser-cut kit (OO)

3ft x 2ft Paving Slabs – Laser-cut kit A quick and easy way to create a slabbed pavement, patio or pedestrian area on your layout with a 3ft x 2ft paving slab effect. Can be easily painted and weathered with acrylic brush or spray paints and weathering powders etc. Also suitable for use with LX213-OO Platform Edging. Features: Engraved 0.8mm thick laserboard sheet Perfect for any era OO / 1:76 / 4mm model railway layout or diorama Compatible with all makes of OO gauge model railway Dimensions: L: 272mm x W: 144mm x H: 0.8mm Supplied unpainted - OO Scale