Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted)

GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J 295 GCR Lined Black (Sound Fitted)

GCR 9J 295 GCR Lined Black (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The 9Js carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme with its ornate three-colour lining is reproduced to exquisite effect, with a rich and consistent finish throughout. The Great Central lettering and company crest on the tender is the icing on the cake, comprising no fewer than six separate colours and replicated using precision printing techniques for full authenticity. The Branchline 9J runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine Great Central Railway Lined Black livery Running No. 295 Smooth Smokebox Door with original Handwheel Top Front Lamp Iron mounted above the Smokebox Door Robinson Tapered Chimney Draught Retarder Original Tall Dome Ramsbottom Safety Valves Parallel Buffer Shanks with End Collars Central Rib on Cab Roof Tender fitted with Water Pick-Up Gear Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann Class 150/1 2-Car DMU 150101 Northern (Sound Fitted)

Class 150/1 2-Car DMU 150101 Northern (Sound Fitted) The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including Northern Trains. The distinctive blue and white livery of Northern makes a return to the Branchline Class 150 DMU, this time on a Class 150/1 as classmate 150101. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, roof ariels and exhaust, the Branchline model replicates the Class 150/1 faithfully. This announcement is also the first time we have produced Class 150/1’s with an accessible toilet in the DMSL, as signified by the blanked off toilet window on one side. The underframe boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and plug and play DCC compatibility makes the Class 150 DMU the perfect addition to any modern OO scale collection. This model is a sales area exclusive and is only available from stockists in Scotland and Northern England. Details: Pristine Northern livery Running No. 150101 Comprises Car Nos. 52101 and 57101 Destination Blinds for Buxton Features: Accessory Pack NEM Coupling Pockets Powerful 5 Pole Motor with Flywheel Interior Detailing and Lighting Directional Lighting Equipped with one 21 Pin DCC Decoder Socket – recommended Decoder 36-557A  Length 540mm - OO Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted Deluxe)

Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted Deluxe) Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Bachmann Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted)

Class 69 69013 Andy's Man Club GBRf Black (Sound Fitted) Bachmann Europe Plc has teamed up with GB Railfreight (GBRf) to produce a OO Scale model of Class 69 Diesel Locomotive No. 69013, which will be sold to help raise funds for Andy’s Man Club, the mental health charity that encourages men to talk and aims to prevent male suicide. The real loco debuted in its striking black livery at the end of April 2025, complete with Andy’s Man Club branding and contact details along with the hashtag #itsoktotalk. Bachmann will be donating proceeds from every sale of this model and with it being the 13th member of the Class 69 fleet, we aim to raise £13,000 to help Andy’s Man Club get men talking all over the UK. No. 69013 is the first model to be unveiled for the second batch of Branchline Class 69s which will be released in 2026. The real locomotive is unique amongst the 16-strong fleet of converted Class 56s in having the lower portions of its cab sheeting removed. This modification was made to the donor locomotive No. 56312 and has been carried over to No. 69013 but is not present on the other 15 locomotives. Every Branchline model is manufactured using complex and expensive tooling suites and producing a model with this unique feature is not possible using the current tooling that Bachmann has developed. Therefore, to model this variant would require new tooling, including a new bodyshell, underframe and chassis block. The cost of such additional tooling would be prohibitive for a single locomotive, preventing any meaningful donation to Andy’s Man Club. Features: Pristine Andy’s Man Club GBRf Black livery Running No. 69013 Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 254mm Five pole, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block and bogie towers Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Close coupling mechanism fitted at each end, each of which is fitted with coupling pockets to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Bogies constructed from multiple components featuring full relief detail Rotating radiator fans, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only) Separately applied metal detail parts, including lifting eyes, windscreen wipers and etched bodyside and fan grilles Sprung metal buffers Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Directional lighting, switchable on/off at either end on DCC or Analogue control Cab lighting*, assigned to two DCC functions for separate switching of each Separately switched Machine Room lighting* (*when used on DCC) Authentic light colours and temperatures selected for each model based on era and application Speaker Fitted – a pre-fitted speaker is included with every model as standard Dual Fitted XL Speaker System – SOUND FITTED and SOUND FITTED DELUXE models feature two speakers, including our new speaker with enhanced bass reproduction – a patented component which incorporates a passive radiator design for optimum sound performance ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 69 using recordings from real locomotives SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied - Era 10 - OO Scale

Rapido UK Ivor the Engine Train Pack (Sound Fitted)

Ivor the Engine Train Pack (Sound Fitted) Features: Ivor the Engine, with working headlamps and glowing dragon egg in the firebox Two open/sheep wagons Full range of sounds and dialogue from the original colour animations on DCC SOUND versions 2D cardboard figures with bases for Jones the Steam, Dai Station, Idris the Dragon and three sheep, all produced from the original animation artwork Fold-up cardboard engine shed and water tower. A brand-new Ivor the Engine story written and illustrated by Daniel Postgate Special presentation box Compatible with other OO gauge products Die-cast metal and injection moulded plastic construction. High quality motor and mechanism. Next18 decoder socket Factory-fitted speaker in all locomotives - OO Scale

Rapido UK 16" Hunslet - "Primrose No.2" (1970s/preserved) - (Sound Fitted)

16" Hunslet - "Primrose No.2" (1970s / preserved) - DCC SOUND Features: NCB red livery as seen during the 1970’s and preservation career with stovepipe chimney. Die-cast metal construction. High quality motor and mechanism. DCC Sound Fitted. High level of detail with plenty of separately fitted parts. NEM coupler pockets. Sprung buffers. - OO Scale

Hornby SR, Merchant Navy 21C1 'Channel Packet' (TXS Steam Generator)

SR, Merchant Navy 21C1 'Channel Packet' (TXS Steam Generator) Locomotive 21C1 'Channel Packet' was the first of the Merchant Navy class, entering service in 1941 at Salisbury and then Exmouth Junction from 1942. Renumbered '35001' under British Railways in 1948, 'Channel Packet' was allocated to Stewarts Lane from 1957 until rebuilding in 1959. This model features DCC sound and steam functionality to recreate the first of Bulleid’s powerful and iconic Merchant Navy locomotives.  Detail features:  High detail OO gauge model based on extensive research and original works drawings  High detail cab with fully decorated backhead and decorated instrument dials  Opening cab roof vent  Removable simulated coal load with fully detailed tender bunker Accurately modelled Merchant Navy Bullied-Firth-Brown wheels Early 21C1 'widows peak' front end streamlining and chimney arrangement 5000 gallon tender in its original condition with raves yet to be cut back Cast trailing truck Separately fitted nameplate, number plate and company ownership plate Horseshoe smokebox door company plate  Sprung metal buffers Heavy die-cast chassis, pony truck and trailing truck  Electronics & traction features:  Pre-fitted steam generator system featuring an optical sensor for accurate chuff rate synchronised with the wheel speed. Steam output is created using piezo element technology. This is a cold water-based system (no heating element)  Pre-fitted 21-pin HM7000 decoder and speaker. The decoder is compatible with NMRA DCC controllers and HM7000 app control  Pre-installed Merchant Navy sound profile for accurate locomotive sounds, synchronised with the chuff rate and steam effect Adjustable steam output settings via the decoder  Water reservoir for up to 20 minutes of continuous steam running Die-cast connecting rods and valve gear  Powerful 5-pole skew-wound motor  Flywheel with cardan shaft arrangement for smooth running  Oilite main drive bearings  Wheel pickups on tender & driven locomotive wheelsets  Pogo pin wheel pickup arrangement for easy pickup servicing  8-way locomotive to tender drawbar, with integrated electrical connection for easy coupling and decoupling Front and rear NEM coupling pockets, with narrow tension lock couplings  Optional fit rear flanged wheelset (only recommended for larger layouts with sweeping curves or display purposes)  Please note: This model requires a DCC controller or the HM7000 app to control.  - OO Scale

Accurascale Class 37 37903 BR Railfreight Grey Large Logo - DCC Sound

Class 37 37903 BR Railfreight Grey Large Logo - DCC Sound Features: Provided Factory DCC Sound Fitted [ESU LokSound 5] ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound as well as independently controlled, smooth coreless motorised fan. Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights Heavy die-cast metal chassis High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam - OO Scale

Bachmann MR 1532 (1P) Tank 58040 BR Lined Black (BR) - DCC Sound Fitted

MR 1532 (1P) Tank 58040 BR Lined Black (British Railways) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black ‘British Railways’ Livery Running No. 58040 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 58051 BR Lined Black (E/E) - DCC Sound Fitted

MR 1532 (1P) Tank 58051 BR Lined Black (Early Emblem) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black Early Emblem Livery Running No. 58051 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 58056 BR Lined Black (E/E) - DCC Sound Fitted

MR 1532 (1P) Tank 58056 BR Lined Black (Early Emblem) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black Early Emblem Livery Running No. 58056 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 1295 LMS Black - DCC Sound Fitted

MR 1532 (1P) Tank 1295 LMS Black - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine LMS Black Livery Running No. 1295 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 4-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with MR/LMS Style Numberplate Low Smokebox Door Handrail Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. The LMS embarked on a programme to replace the 1P’s original round-top boilers with Belpaire boilers and No. 1370 is one such locomotive to have undergone this treatment. A miniature marvel, the Branchline model is packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 3 - OO Scale

Bachmann MR 1532 (1P) Tank 1370 LMS Black - DCC Sound Fitted

MR 1532 (1P) Tank 1370 LMS Black - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine LMS Black Livery Running No. 1370 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 4-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with MR/LMS Style Numberplate Low Smokebox Door Handrail Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. The LMS embarked on a programme to replace the 1P’s original round-top boilers with Belpaire boilers and No. 1370 is one such locomotive to have undergone this treatment. A miniature marvel, the Branchline model is packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 3 - OO Scale

Accurascale Hunslet Austerity HC1775 BR Black Early Emblem 68025 - DCC Sound

Hunslet Austerity HC1775 BR Black Early Emblem 68025 - DCC Sound This locomotive was one of a batch of 36 Austerities by Hudswell Clarke of Leeds. This particular one was completed in November 1944 and carried the WD number 71498. Purchased by the LNER in June 1946 the locomotive was classified as a J94 and numbered 8025. The distinctive extended bunker was fitted in November 1949 when it was renumbered 68025 and gained the early BR emblem. The locomotive was based at Darlington 51A until withdrawal in 1963. The locomotive did not survive and was cut up shortly after. The model replicates the period after 1949 and carries the extended bunker, smokebox numberplate and additional steps and handrails on the tank Features: Highly detailed 0-6-0ST 00 gauge model, 1:76.2 scale on 16.5mm track Minimum Radius 438mm (2nd radius set track) RP25-110 profile 00 gauge wheels Coreless motor with flywheel geared for maximum performance and slow speed running Die-cast metal chassis and pickups to all wheels. Next18 DCC ready or ESU LokSound V5 sound fitted, slot mounted in smokebox PowerPack capacitor for uninterrupted power Two quality sugar cube speakers contained in sound capsule located for best possible sound. Small, flexible neck NEM coupler mounts set at correct height, with mini-tension-lock couplers. Brake rigging factory fitted Brake blocks aligned with wheels Scale width wire handrails and sand pipes Fully detailed cab interior with twin LED pulsing/steady Firebox glow Etched metal/plastic detail parts, including grab handles, steps, pipework, lamp irons etc. Sliding roof ventilator Etched metal pre-painted name plates and works plates. Fully sprung metal buffers, factory-installed pipework and screw/3 link couplings Magnetically removable smoke box door for DCC decoder access - OO Scale

Accurascale Class 66 66421 'Gresty Bridge TMD' DRS - DCC Sound

Class 66 66421 'Gresty Bridge TMD' DRS - DCC Sound One engine that hasn’t changed operators was DRS owned 66421. This particular locomotive was delivered on the 9th September 2007. Originally carrying the DRS compass livery, the locomotive was soon put to work on a variety of the companies trains.66421 was refreshed with the new simplified DRS livery during 2015 and ran unnamed until 2018 when it featured at the DRS Crewe Gresty Bridge TMD open day where it was named after the depot. Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Hornby BR Class 56 56060 'The Cardiff Rod Mill' (Sound Fitted)

BR Railfreight, Class 56, Co-Co, 56060 'The Cardiff Rod Mill' - Era 8 (TXS DCC Sound Fitted)  Includes: - Highly detailed with fine grill parts - BR railfreight two tone grey livery - Metal Sector logo - TXS DCC Sound Fitted    (NOTE: This model and sound functions can ONLY be operated with the HM7000 App via bluetooth or a DCC digital controller) - Accessory bag - Sprung buffers - NEM couplings and pockets - 5 pole motor - Model will traverse 2nd radius curves minimum (R606/R607) - Era 8 - OO Scale

Bachmann Class 117 3-Car DMU R334 BR Green (Small Yellow Panels) DCC S/F

Class 117 3-Car DMU R334 BR Green (Small Yellow Panels) R334 DCC Sound Fitted Detail Variations Specfic To This Model: Pristine BR Green (Small Yellow Panels) Livery Set No. R334 3-Car Unit comprising DMBS No. W51334, TCL No. W59486 and DMS No. W51376 Destination Blinds for Reading and Paddington Original Cab Fronts without Marker or Tail Lights Glazed Headcode Boxes displaying Headcodes 2A25 & 2A60 Full Height Cab Handrails As built, without Corridor Connectors Cut Buffers Original Bogies One-Piece Exhaust at the Corridor End on the DMBS and DMS Vehicles Features: Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 816mm Two motorised vehicles (DMBS and DMS) each fitted with three pole motors and a flywheel providing drive to the inner bogie Four axle drive (two driven axles in each of the DMBS and DMS vehicles) Separate metal bearings fitted to each driven axle Trailing axles run in metal pinpoint bearings Electrical pickup from all wheels Diecast metal, multi-stage gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted to each outer bogie on the DMBS and DMS vehicles Conductive couplings with integral close coupling mechanisms fitted between vehicles Designed to operate on curves of second radius (438mm) or greater Directional lighting, including illuminated headcode panels* and high intensity headlights*, switchable on/off independently at either end via the chassis-mounted switches or via dedicated DCC functions (*where applicable to the prototype being modelled) Separately illuminated destination panels, switchable on/off independently at either end via the chassis-mounted switches or via dedicated DCC functions Passenger saloon lighting – switchable on/off via the chassis-mounted switches or via a dedicated DCC function Cab interior lighting – switchable on/off via the chassis-mounted switches or via a dedicated DCC function Authentic light colours and temperatures selected for each lighting application Two speakers fitted, one in each of the DMBS and DMS vehicles, for optimum sound reproduction – fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Class 117 DMU using recordings from real units - Era 5 - OO Scale

Bachmann Class 09 09106 DB Red (Unbranded) DCC Deluxe S/F

Class 09 09106 DB Red (Unbranded) 09106 DCC Deluxe Sound Fitted Details Variations Specific To This Model: Pristine DB Red (Unbranded) livery Running No. 09106 Box Profile Main Frames Concealed Bodyside Door Hinges Radiator Ladders Removed Steel Cab Door OLEO Buffers Dual Brakes 2 Front Marker Lights (with rounded bottom housings) 2 Front Lamp Irons (middle pair removed) 2 Rear Marker Lights (with rounded bottom housings) 2 Rear Lamp Irons (middle pair removed) Standard Cab Panel (without Stiffening Ribs) Whistle Cab Roof Radio Pod Equipment Boxes (RHS) with Raised Doors and Recessed Latches External Fuel Pump Air Compressor Cabinet (LHS) Buckeye Coupler Fitted Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 122mm Five pole motor with flywheel providing drive to the rear axle Sprung centre axle to aid running over uneven track Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block incorporating the gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at both ends Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Fully operational front and rear lights with two, four or six lights dependent on the prototype being modelled Eight microswitches (easily accessed via the removable, clip-on roof panel) allowing user-configuration of the front and rear lights when operated on DCC or Analogue control Shunting lights (one red and one white light at each end) operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Cab light operated via a dedicated function on DCC, or using an easy access microswitch on Analogue control Front and rear lights can be turned on/off independently via two dedicated functions on DCC, or using two easy access microswitches on Analogue control Authentic light colours and temperatures selected for each model based on era and application A quality speaker employed for optimum sound reproduction, fitted to every model as standard Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED and SOUND FITTED DELUXE versions Sound files produced specifically for the Bachmann Branchline Class 08 using recordings from real locomotives The Class 08 Diesel Shunter was BR’s most numerous diesel locomotive type (totalling more than 1,000 examples alongside its Class 09 and Class 10 counterparts) and models of this icon have long been a staple of the Bachmann Branchline range. However, this brand-new 08 owes nothing to its predecessors and finally brings the story of the humble diesel shunter right up to date with this most accurate of OO scale renditions. Constructed from high fidelity mouldings, the new Branchline model employs a wealth of separately fitted details, including various metal components, and offers countless combinations of details and variations to allow individual locomotives to be modelled accurately at a chosen time in history. This external beauty is brought to life by the exquisite livery application which uses true-to-prototype colours, fonts and logos – extending beyond the exterior to the cab interior which itself is highly detailed and decorated accordingly. Meanwhile, ‘under the bonnet’ the model boasts a high specification that utilises the latest advancements in model railway technology. For the first time a full suite of lighting, including up to 13 separate lights, is fitted and can be enjoyed by both analogue and DCC users – whilst the new shunter is the first model to employ Bachmann’s Bach-Up stay alive system, providing DCC users with a reserve power supply for uninterrupted running even on dirty or uneven track. - Era 7 - OO Scale