Oxford Diecast Ford Transit Mk.4 RAC (1:76)

Ford Transit Mk.4 RAC The Ford Transit Mk4 represented the 3rd generation of the vehicle in real life, spanning the years from 2000 to 2006.  This vehicle was different in that it had been designed in the USA and contained many cutting edge features; it came with automatic transmission; front or rear wheel drive; more cargo space and greater towing capacity. An option on rear wheel drive models included controls mounted on the dashboard, a specially adapted manual mode, tow-haul mode, economy mode and winter mode. All of these plus points would have made it an ideal vehicle for the RAC, whose key role is helping motorists in distress in all conditions and sometimes over difficult terrain. Our model is registered VE03 GGZ from 2003 and is decorated in the ultra modern bright orange with red and white chevron back with a blue and white panel promoting the RAC. To the sides and front, the printed information is in white against the orange ground, as well as a dark blue and white panel masked along the sides. A notable feature is the clever way in which the offside front wing chevron decals have been printed over the curved surface – it is absolutely flush!  The van interior is moulded completely black. A final tooling modification on this release sees the addition of a roof bar positioned right at the back of the roof – authentic down to the final detail! - 1:76 Scale

Oxford Diecast Ford Transit Mk5 SWB Low Roof Stobart Rail (1:76)

Ford Transit Mk5 SWB Low Roof Stobart Rail The Oxford Ford Transit comes in several formats here we see it as a short wheelbase with low roof as used by Stobart Rail Civil Engineering. In white with blue and red graphics, the van is registered BT62 NTF. The interior as well as the exterior trim are all in black. Additional graphics include the blue and silver Ford badge in the centre of the radiator and printed on the offside back door. - 1:76 Scale

Oxford Diecast Ford Transit Connect Stobart Air (1:76)

Ford Transit Connect Stobart Air  The Ford Motor Company boasts that every Transit is built for purpose and the smaller Ford Transit Connect is no exception with a large cargo capability lending itself to all sorts of commercial van users. Shaped by Ford kinetic design, the van has improved aerodynamics for greater fuel efficiency and high-tech lights for greater visibility. Component parts have also been designed for easy service and replacement. The Eddie Stobart fleet goes from strength to strength in its expansion from road vehicles, then rail traffic and here we have a support vehicle for Stobart Air, which the company took over from the regional airline Aer Arann in Dublin and which operates numerous flights between Ireland, the UK and parts of Europe. Our highly decorative model in the shape of the very modern Ford Transit Connect is registered PK12 AZO. The bright blue graphics on a silver grey background show it as operating out of London Southend Airport. A central chequered band of blue and white runs the complete length of both sides and the blue and white colour scheme is repeated in a chevron effect across the back doors. The bonnet has been given solid blue finish. Stobart Air operates from several small airports in the UK, so you may well see similar support vans in the vicinity of any of them. Our model also makes an unusual addition to your Eddie Stobart fleet of vehicles. - 1:76 Scale

Oxford Diecast Showmans Living Wagon Green/Cream (1:76)

Showmans Living Wagon Green/Cream (1:76) Oxford’s living wagons have covered several eras from the simple workmen’s utility hut on wheels to highly decorative Showman’s caravans.  For this release we revert to the time when the Showmans Living Wagon had beautiful spoked wagon wheels and elaborately applied coach lines. Here we see our Living Wagon in bright green with a white roof and cream roof undersides. A black chimney stack is perched on the roof too. The green bodywork has finely detailed gold coachwork applied to the sides, the back and the front door. The chassis, underside box and the large wagon wheels are all decorated in cream with a red surround to the wheels and gold wheel centres.  Finally, a tow bar fitted to the front of the wagon is all ready to attach to your steam powered wagon of the era

Oxford Diecast Mobile Trailer Loch Side Cafe (1:76)

Mobile Trailer Loch Side Cafe Includes: - Detailed diecast model - Loch Ness motif branding - Interior moulding - Wheel, underframe and tow detail - Display stand - OO Scale Vehicle information: The ubiquitous 1:76 scale mobile trailer takes to the Highlands for its latest vending opportunity.  Parked by the loch side, from where it takes its name, our trailer is registered LSC 23 and is distinctively decorated in white with orange roof and window shield, with a deep blue lower body. The orange carries through to the mudguards and tow bar mechanism. The equally brightly painted roof board advertises Monster-size Portions. Along the back of the van, the ever-elusive Monster features in a vivid green, yellow and red as it snakes through the dark blue painted water. On the hatch side, here he is again, this time surrounded by the graphics promoting big burgers, huge sausages, ‘loadsa seafood’ and hot and cold drinks to wash it all down.  That creature certainly seems to have his eyes on something appetising.

Oxford Diecast Land Rover Discovery 1 - Foxfire (1:76)

Land Rover Discovery 1 - Foxfire Includes: - Diecast model - Grill and  wheel detail - Interior detail as per prototype - Rear extra wheel detail attached - Display stand - OO Scale Vehicle information and history: The 1:76 scale the model is based on the vehicle which Land Rover produced at the Solihull plant between 1989 and 1998. Registered F981 ENV from 1998, ours is representative of the last year of manufacture. In real life, the Discovery 1 followed some of the finer features of the Range Rover with the same chassis, suspension and 4 wheel drive system. It was designed, however, at a more affordable price point so it came with smaller engine sizes and initially a three door option. It was also the first Land Rover aimed at the daily driving family market whilst still maintaining the off road facility. In addition, it provided more luggage space and was the only model with a 4 cylinder petrol engine option as well as the diesel alternative. The Discovery 1 came with either a 4-speed automatic or 5-speed manual gearbox Another innovative feature was the interior for which Land Rover engaged the help of the Conran Design Group.  The result was a uniform interior colour scheme regardless of exterior paintwork, comprising a signature Sonar Blue to seats and carpet. The car also featured magazine holders above the windscreen, hand-holds for rear passengers built into the front seat head rests, new radio controls on the instrument cluster, two removable sunroof panels and a Land Rover branded cloth fabric holdall in the front centre console for storage. This unique ‘bag’ could be removed and with a detachable shoulder strap could be used as a fashion accessory.  A collector’s item in itself! The remainder of the interior and dashboard features of the Discovery 1 were taken from the existing Rover Group stable, including the instrument panel, digital clock, heater and air conditioning controls. A nod to nostalgia comprised the distinctive Morris Marina door handles. Our 1:76 scale model incorporates all the fine visual features of the original. The interior replicates the authentic Sonar Blue, enhanced with a Sonar Grey dashboard, steering wheel and door panels. Additional interior features include black floor mats, grey interior door handles, gearstick and hand brake. The exterior bodywork is a metallic red colour scheme with black and silver trim. Side body and rear window flashes are finished in grey, silver and a fine blue stripe.  Detailed roof bars, rear mud flaps, wheel centres and bolts are all black. The spare wheel appears fixed off centre on the rear full width door to the right of the  number plate. The Discovery 1 retained the chunky utility vehicle function for which Land Rover was historically renowned, while incorporating many refinements aimed at comfort and economy in an ever competitive automotive world.  

Oxford Diecast Ford Transit LWB High Stobart Fleet Maintenance

Ford Transit LWB High Stobart Fleet Maintenance Includes - Detailed diecast model - Body and grill detailing - Eddie Stobart branding - Cab/Interior detail - Display stand - OO Scale

Oxford Diecast Ford Transit LWB High Roof Stobart (1:76)

Ford Transit LWB High Roof Stobart Carrying an unusual colour scheme for an Eddie Stobart vehicle, this long wheel base Ford Transit with a high roof carries the livery used by the famous haulier as a support vehicle in the freight side of the business. The white Transit is registered YP58 PXZ and carries the Eddie Stobart Rail logo on the sides and rear, Civil Engineering lettering along the lower sides in blue and the website address across the bottom of the back doors. - 1:76 (OO) scale