EFE Rail LSWR Adams T3 560 SR Lined Maunsell Green

LSWR Adams T3 560 SR Lined Maunsell Green The first LSWR T3 Class locomotive was built in 1892 and 125 years later, the T3 was thrown into the spotlight when the National Railway Museum donated the sole preserved example, No. 563, to the Swanage Railway Trust. Ever since this controversial move there has been a desire to see a OO scale model of this Victorian masterpiece, and now, we are delighted to fulfil those wishes with this brand-new model developed for Bachmann’s EFE Rail range. Employing a large number of diecast metal components to provide the optimal weight distribution needed for this 4-4-0 locomotive to perform at its best, the EFE Rail T3 is powered by a five pole motor and flywheel which is geared to the rear driving axle. DCC provision comes in the form of a Next18 decoder socket mounted in the tender, where a speaker is also fitted, meanwhile within the cab of the model a firebox lighting system has been installed which operates on both analogue and DCC. An innovative loco-to-tender coupling design provides both integral electrical connections and a close coupling feature, whilst at either end of the model NEM coupling pockets are fitted and sprung metal buffers are mounted on each bufferbeam. Each model sports an array of locomotive- and era-specific detailing as appropriate, all of which is highlighted by the ornate livery application. Details on this Model: Pristine SR Lined Maunsell Green livery Running No. 560 Etched Numberplates* Adams Boiler Drummond Chimney Adams Smokebox Door Rivetted Smokebox Saddle Traditional Suspension Fluted Coupling Rods Rear Bogie Wheel Splashers* Single Whistle Welded Lamp Irons SR Disc Head Signals* Tender Coal Rails *supplied separately for optional fitting Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 228mm (over couplings) Five pole motor with flywheel mounted in the locomotive, driving the rear set of driving wheels Electrical pickup from all driving wheels and tender wheels Separate metal bearings fitted to each driving wheel axle and each bogie wheel axle Metal bearings fitted to each tender wheel axle Diecast metal chassis fitted to both the locomotive and tender Gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Discreet snap-together locomotive to tender drawbar with integral close coupling mechanism and electrical connections Sprung front bogie Front bogie features a clip-in front section with optional blank filler or coupling adapter with integral coupling pocket to NEM362 standards Tender features a close coupling mechanism which is fitted with a coupling pocket to NEM362 standards Designed to operate on curves of second radius (438mm) or greater Firebox lighting with twin LEDs operating on DC and DCC Textured filter in the firebox hole to simulate a burning coal fire Twin speakers installed in the tender of all models for optimum sound reproduction - Era 3 - OO Scale

EFE Rail SR Bulleid Booster 20001 BR Green

SR Bulleid Booster 20001 BR Green Features: Pristine BR Green livery Running No. 20001 Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 235mm (over couplings) Five pole, skew wound, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic ‘Bulleid’ profile and detailing Bogie-mounted coupling pockets to NEM362 standards at each end Designed to operate on curves of second radius (438mm) or greater Metal Pantograph, sprung for posing in the up or down position Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, handrails, roof vents and whistles Sprung buffers Cab interior detailing including seats, power handle, brake wheel and dials Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker installed in all models for optimum sound reproduction DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Standard Cab Windows Vertical Handrail alongside the Left Hand Cab Window Two Windscreen Wipers Twin Whistles Route Indicator Discs Single-tread Steps between Bogies Original Axle Boxes Two Sandboxes per Bogie Square Shoe Beam Flash Guards Standpipe Vacuum Pipes Conceived in the late-1930s to take advantage of the Southern’s expansive electrified network, two of these Co-Co locomotives were built, gaining the nickname the ‘Boosters’ due to their motor-generator-flywheel drive arrangement employed to overcome ‘gapping’, when the locomotive could momentarily loose its electrical supply when travelling over gaps in the conductor rail. Produced especially for the EFE Rail range, this all-new model features a wealth of detail with a varied tooling suite allowing the first two locomotives, CC1 and CC2, to be modelled accurately at various points in their careers. Driven by a 5 pole, skew wound motor with flywheel, each of the six axles are driven whilst all twelve wheels provide electrical pickup. Directional lighting will operate in the forwards direction (the real locomotives were not fitted with tail lights), whilst cab lighting can be operated using a magnetic wand when used on analogue control, or when a 21 Pin DCC decoder is fitted, via two DCC functions. A speaker is pre-fitted to every model, allowing a sound decoder to be fitted to bring another dimension to your model in an instant. - Era 5 - OO Scale