Bachmann MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black

MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine LMS Black livery Running No. 3850 Johnson-Deeley Tender Tall Chimney with Capuchon Ramsbottom Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann LMS 10000 BR Black (Early)

LMS 10000 BR Black (Early) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model tells the story of No. 10000 during its time working on the Southern Region. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system as displayed on this model of No. 10000, which is depicted in its striking black and silver livery with early emblems. The Bachmann Branchline model is a highly detailed replica of the pioneering prototype, adorned with numerous separately fitted components to accurately capture the appearance of this iconic machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Black & Silver Early Emblem livery Running No. 10000 Six Headcode Lights & Brackets at each end Bodysides Steps Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann LMS 10001 BR Lined Green (Late Crest)

LMS 10001 BR Lined Green (Late Crest) The LMS ‘Twins’ – Nos. 10000 and 10001 – were the very first mainline diesel locomotives built in the UK and this Bachmann Branchline model pays homage to the youngest of the pair, 10001. Built by the LMS and so becoming part of the Midland Region’s fleet under BR, after five years in traffic the ‘Twins’ were sent to the Southern Region (SR) between 1953 and 1955 for trails alongside the SR’s own prototype diesels. To work on the SR, additional headcode lights and brackets were fitted to suit the Southern 6 position headcode system and these remained a feature of both locomotives thereafter, as displayed on this model of No. 10001 which is depicted in BR Green livery and with the late crests that were applied by BR from 1956. By this time the pair had returned to the Midland Region and were employed on duties across the region. The Bachmann Branchline model of No. 10001 is a highly detailed replica of the prototype, adorned with numerous separately fitted components to accurately capture the appearance of this pioneering machine. The livery application captures the splendour of this elegant locomotive, whilst engine room detailing has been replicated through the bodyside windows for the first time. Inside, the proven combination of a five pole motor and twin flywheels, driving both bogies and with all-wheel drive will provide enough power for any prototypical train. Smooth running is assured thanks to the use of separate metal bearings on each axle. The 21 Pin DCC decoder socket makes it easy to equip this model for DCC use, and there’s space for a speaker to be fitted if you wish to add sound. Details: Pristine BR Lined Green Late Crest livery Running No. 10001 Six Headcode Lights & Brackets at each end Smooth Bodysides (No Steps) Water Scoops Fitted Features: Powerful 5 Pole Motor NEM Coupling Pockets Directional Lighting Chassis mounted switches allow tail lights to be turned off and provide a choice between Passenger or Freight headcode light configurations Cab Lighting Detailed Cab Interior with pre-fitted crew in one cab Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 254mm (over couplings) - OO Scale

Bachmann MR 3835 (4F) w/ Fowler Tender 43892 BR Black

MR 3835 (4F) w/ Fowler Tender 43892 BR Black The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black ‘British Railways’ livery Running No. 43892 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Fowler Tender 43982 BR Black (Late)

MR 3835 (4F) w/ Fowler Tender 43982 BR Black (Late) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Late Crest livery Running No. 43982 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 221mm (over couplings) OO Scale 

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem)

GCR 9J (J11) 64305 BR Black (Early Emblem) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Hornby Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG BS

Railroad: BR Class 37 37501 'Teesside Steelmaster' ROG British Steel Blue Built by English Electric at its Vulcan Foundry in Lancashire, the locomotive this RailRoad model is based on started life in January 1961 as D6705, going new to Stratford depot in London.  After becoming 37005 under TOPS, it was rebuilt as a Class 37/5 in April 1985, which included replacing its EE generator with a new Brush unit, and a complete re-wire, with a consequent renumbering to 37501. It was then painted into its distinctive British Steel pale blue colour scheme, gaining Thornaby Kingfisher motif and British Steel logos. It was then named ‘Teesside Steelmaster’ in 1987.  It was later modified for the proposed Channel Tunnel sleeper ‘Nightstar’ project (which was later aborted) to become a 37/6 in February 1995 and renumbered to 37601. It is currently one of six Class 37s leased by Rail Operations Group from Europhoenix for contracted movement of passenger stock, including EMUs. It was returned to its 1987 guise during a repaint in 2025.  This RailRoad model locomotive is a durable design, perfect for model railway beginners, younger enthusiasts, or anyone who enjoys running their trains daily. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour)

LNER Flying Scotsman & GWR Pendennis Castle (Australian Tour) Train Pack  In 1988, Australia celebrated its bicentenary and, to mark the occasion, the world-famous ‘Flying Scotsman’ was invited to travel from Britain to take part in a series of railtours that were part of the ‘Aus Steam 88’ Festival, arriving in October that year.  Already resident in Western Australia since 1977, in the care of the Pilbara Railway Historical Society, former GWR ‘Castle’ Class 4-6-0 ‘Pendennis Castle’ was moved by road to Perth in early 1989 to operate alongside its one-time rival ‘A3’ Class ‘Pacific’. This unlikely reunion occurred almost 9,000 miles from where a week-long locomotive exchange once took place between the LNER and GWR, in April 1925.  This LNER and GWR Train Pack celebrates that landmark event in Australia 37 years ago in 1989. Featuring OO gauge locomotive model replicas of 'Flying Scotsman' and 'Pendennis Castle', these highly detailed designs include sprung metal buffers and NEM tension lock couplings for smooth rake creation. Add a 21-pin decoder to upgrade to HM7000 control. - DCC Ready 21-Pin Socket - OO Scale

Hornby LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition)

LNER A4 4498 'Sir Nigel Gresley' w/ Figure (Limited Edition) (150th Anniversary Collection) The LNER Class A4 Sir Nigel Gresley model locomotive is a limited edition model and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Gresley's birth, and this locomotive includes a figure.  With a shiny new blue livery and NEM tension lock couplings, this steam locomotive is a wonderful collector's piece.  Entering service with the LNER as 4498 in Garter blue with streamlined side-skirting and red wheels, this was the 100th Gresley ‘Pacific’ to be built when it emerged from Doncaster Works in October 1937. Allocated to King’s Cross ‘Top Shed’ and used on front-line express services such as the prestigious ‘Coronation’ between London and Edinburgh, ‘SNG’ was built with a single chimney and had stainless steel numbers and letters for the tender added at a general overhaul in January 1939.  After a period in wartime black, when the side-skirts were permanently removed, the locomotive returned to lined Garter blue in March 1947. Painted into BR’s express passenger blue in September 1950, as 60007, it set a post-war steam record speed of 112mph on 23 May 1959. Withdrawn in February 1966, by now in BR green, it was saved for preservation by the A4 Locomotive Society. - DCC Ready 21-Pin Socket - OO Scale

Hornby LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition)

LMS Streamlined 6220 'Coronation' w/ Figure (Limited Edition) (150th Anniversary Collection) The LMS Streamlined 'Coronation' model locomotive is a limited edition item and part of The Great Railway Engineers Collection. This Collection marks 150 years since Sir Stanier's birth, and this locomotive includes a figure. With a shiny bold red livery and NEM tension lock couplings, this steam locomotive is a must-have for collectors. The ‘Princess Coronation’ Class, also known as the ‘Duchess’ Class, was an enlarged and improved version of William Stanier’s successful ‘Princess Royal’ Class ‘Pacific’. The first ten class members emerged from Crewe Works in a streamlined form during 1937 and five of these were put aside specifically for hauling the prestigious ‘Coronation Scot’ between London Euston and Glasgow Central. These were painted in Caledonian blue and had silver horizontal lining, which matched the carriages they pulled. No. 6220 set a new British steam speed record of 114mph in 1937, but this was beaten by the LNER’s ‘Mallard’ in 1938. Built with a single chimney, 6220 was the last of the original 15 to be fitted with a double blast pipe and chimney in 1944. The locomotive’s streamlined casing was removed in November 1946, and it finished its career in its rebuilt form with smoke deflectors as BR’s 46220 in April 1963. - DCC Ready 21-Pin Socket - OO Scale

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved

Hornby Dublo: English Electric DP1 'Deltic' NRM Preserved The BR English Electric DP1 'Deltic' is always a favourite model, and with its new blue livery, this OO gauge diesel engine is sure to be just as popular. This version features sprung metal buffers, NEM tension lock couplings and a coreless motor. It is also DCC-ready with a 21-pin socket for easy HM7000 conversion. Features include: High detail OO gauge model based on extensive research Presented as on display in Locomotion, Shildon, with grey chassis, steps and buffers; and horns removed Heavy, fully die-cast chassis and body Highly detailed cab interior Decorated driver controls with illuminated instrument dials Directional head and tail lighting Optional working Mars lights Working cab lights Engine bay lighting Physical switches on blanking plug to control the various lighting configurations Magnetic roof cover to access 21-Pin DCC socket Dual working roof fans, with manually adjustable speed controls Separately fitted etched window frames Large, powerful coreless motor with two flywheels for smooth running Dual bogie drive Sprung metal buffers Front and rear NEM coupling pocket Additional lamps supplied in the accessory bag Hand painted driver figures Supplied with 8 finely decorated etchings, including Locomotion headboard Decorated engine bay featuring printed ‘Napier Deltic’ plates Pre-fitted with a sugar cube speaker for easy digital conversion Space inside for HM7000 Enhanced Bass Speaker Space inside fuel tank for HM7070 - Power Bank Flange squeal sensor mounted in the bogies automatically detects when it is going round a curve to play flange squeal sounds dependant on speed. (Feature available once product is fitted with a HM7000 decoder) Fitted to display plinth with etched presentation plate Fully compatible with Hornby HM7000 app control system, with meticulously crafted Deltic sound profile (SD049) available for download. - DCC Ready 21-Pin Socket - OO Scale

Bachmann Class 150/1 2-Car DMU 150101 Northern

Class 150/1 2-Car DMU 150101 Northern The Class 150 Diesel Multiple Unit (DMU) is an enduring design, first introduced in 1984 much of the fleet remains in service today with operators including Northern Trains. The distinctive blue and white livery of Northern makes a return to the Branchline Class 150 DMU, this time on a Class 150/1 as classmate 150101. Constructed from a highly detailed bodyshell which is adorned with separate components like the cab front handrails, roof ariels and exhaust, the Branchline model replicates the Class 150/1 faithfully. This announcement is also the first time we have produced Class 150/1’s with an accessible toilet in the DMSL, as signified by the blanked off toilet window on one side. The underframe boasts a suite of parts to depict the engine, drive train, electrical gear and auxiliary equipment, while inside the model, passenger seating is included along with cab detail. The livery application, using authentic colours and accurate typefaces and logos just enhances the model’s good looks, while the powerful and smooth drive mechanism and plug and play DCC compatibility makes the Class 150 DMU the perfect addition to any modern OO scale collection. This model is a sales area exclusive and is only available from stockists in Scotland and Northern England. Details: Pristine Northern livery Running No. 150101 Comprises Car Nos. 52101 and 57101 Destination Blinds for Buxton Features: Accessory Pack NEM Coupling Pockets Powerful 5 Pole Motor with Flywheel Interior Detailing and Lighting Directional Lighting Equipped with one 21 Pin DCC Decoder Socket – recommended Decoder 36-557A  Length 540mm - OO Scale

Hornby BR Class 153 153360 Serco Northern Rail

BR Class 153 153360 Serco Northern Rail The Hornby Class 153 No. 153360 is finished in the distinctive Northern Rail livery, representing its appearance during regular service in the north of England. It is DCC ready with a 21-pin decoder socket for easy digital upgrade and fitted with NEM couplings. History: The Northern Rail franchise commenced in December 2004 and inherited its fleet from those of Arriva Trains Northern and First North Western, including a large number of Class 153 single units, of which No. 153360 was one.  Under Northern Rail, the unit saw considerable use in the Carlisle area, including services on the Settle and Carlisle line and the Cumbria coastal line to Barrow-in-Furness.  Arriva Rail North, Northern Rail’s successor from 2016, operated the largest fleet of Class 153 units in the UK. No. 153360 went into storage in late 2021 and was subsequently scrapped. - OO Scale

Hornby GWR Saint Class 2920 'Saint David' BR Lined Black (Early)

GWR Saint Class 2920 'Saint David' BR Lined Black (Early) Of the 77 Saint Class members built by GWR between 1902 and 1913, 2920 ‘Saint David’ was one of the 47 that survived beyond nationalisation of Britain’s railways in 1948. Part of the third batch of 20 to be built in 1907, the locomotive was new to Cardiff Canton shed. It underwent several changes during its career, including the fitting of a superheated boiler in 1909 and outside steam pipes in December 1932. This model is presented in BR livery, the condition in which it operated through to its withdrawal in October 1953, by which point it was one of the last four still in service. This model was developed with the helpful guidance from the Didcot Railway Center who kindly gave us access to their archive of drawings and access to the Lady of Legend locomotive. The Saint class model features a powerful 5 pole skew wound motor, flickering firebox and is designed to be fully compatible with the HM7000 21-Pin decoder for full DCC and sound control. Details Specific to R30403: Running number 2920 BR Black livery. Riveted Churchward Tender Later style curved frame chassis design. Fluted diecast piston rods. Tapered superheated boiler Later Chimney Design Later safety Valve with Top Feeds Common Saint Class Features Features: Diecast Chassis and Running Plate. Model Weight is 341 grams. High detail cab and fully decorated backhead with decorated instrument dials. Etched metal nameplates HM7000 21-Pin sound decoder compatible. HM7000 Power Bank compatible. Powerful 5 Pole Skew wound motor. Illuminated flickering firebox. Quick release locomotive to tender connector. Pogo pin wheel pickup arrangement for easy pickup servicing. Electrical pickups on main drive wheels and tender wheels. Diecast Piston Rods & valve gear. Fully decorated crew figures. Prototypical size metal handrails with brass stanchions. Brass main drive bearings. Sprung metal buffers. Front and Rear NEM coupling pocket. Separately fitted lamps. Lamp code can be changed. Separately fitted simulated coal load. - OO Scale

Rapido UK USATC S160 '6046' Satin Black U.S.A. (Preserved)

USATC S160 '6046' Satin Black U.S.A. (Preserved) Livery- Black (satin finish) with U.S.A. on tender. Manufacturer- Baldwin Locomotive Works – Philadelphia – 1945 Repatriation date- Early 2000s Current location- Churnet Valley Railway Date of model- 2013 to present Tooling variations: Standard lamp irons Straight strap smokebox door PKP air pump Front running plate-mounted sandboxes Straight running boards Left hand drive with screw reverser and ‘Ajax’ pattern firehole door Cab rear shutters fitted Tender with lockers and extra air tanks Ejector fitted to left hand side of smokebox Boiler-mounted ejector pipe fitted Alternate piston valve covers fitted Features: 21 Pin DCC Decoder Socket 2 Factory Fitted Speakers Firebox Glow Twin Flywheel Motor Pickups on Loco & Tender - OO Scale

Rapido UK USATC S160 '5197' Satin Black U.S.A. (Preserved)

USATC S160 '5197' Satin Black U.S.A. (Preserved) Livery- Black (satin) with U.S.A. on tender Manufacturer- Lima Locomotive Works – Ohio – 1945 Repatriation date- 1995 Current location- Churnet Valley Railway Date of model- 2022 to present Tooling variations: Standard lamp irons Straight strap smokebox door PKP air pump Front running plate mounted sandboxes Straight running boards Left hand drive with screw reverser and ‘Ajax’ pattern firehole door Cab rear shutters fitted Tender with lockers and extra air tanks Ejector fitted to left hand side of smokebox Alternate piston valve covers fitted Features: 21 Pin DCC Decoder Socket 2 Factory Fitted Speakers Firebox Glow Twin Flywheel Motor Pickups on Loco & Tender - OO Scale

Hornby RailRoad: LNER, Class 800, 800201 Train Pack

RailRoad: LNER, Class 800, 800201 Train Pack This Class 800 Train Pack in the famous London North Eastern Railway (LNER) livery consists of a drive and dummy car both with directional lighting. This makes the perfect modern-image passenger train and can be extended with the extra Class 800 coaches that are also available. - 21-pin DCC Socket - OO Scale

Hornby RailRoad Plus: Class 66 66711 Aggregates Industries 'Sence'

RailRoad Plus: Class 66 66711 Aggregates Industries 'Sence' This RailRoad Class 66 diesel was built for freight trains and operates across the UK making it the perfect locomotive for your model freight train. It is compatible with many wagons from Hornby. It comes DCC-ready with a 21-pin plug, meaning it can be upgraded to run on DCC or with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive. This GBRf-owned locomotive is finished in the attractive turquoise, blue and silver colours of Aggregate Industries, at whose quarry at Bardon Hill it was named ‘Sence’ in July 2015. The name refers to the River Sence which has its source just north of the quarry. - DCC Ready 21-Pin Socket - OO Scale

Hornby RailRoad Plus: Class 66 66723 GBRf 'Chinook'

RailRoad Plus: Class 66 66723 GBRf 'Chinook' This RailRoad Class 66 diesel was built for freight trains and operates across the UK making it the perfect locomotive for your model freight train. It is compatible with many wagons from Hornby. It comes fitted with a 21-pin plug, meaning it can be run on DCC and with our HM7000 Bluetooth-controlled system, which also includes sound via a speaker inside the locomotive. The Class 66 is a heavy-freight diesel-electric locomotive, a development of the earlier Class 59 which was a great success in the UK with Foster Yeoman. Like its predecessor, EMD Co-Cos have all been built in North America, with 480 supplied to UK operators between 1998 and 2008 and 2014 and 2015. Many more were bought secondhand from mainland European operators, so it is no surprise that these machines handle the lion’s share of freight traffic in the UK today. Despite being called ‘sheds’ by enthusiasts because of their shape, they have carried many colourful and innovative liveries.No. 66723 ‘Chinook’ is in GBRf blue and orange livery, and is named in honour of the RAF’s 7, 18 and 27 Squadrons based at Odiham in Hampshire. This is also the home of the CH-47 Chinook heavy lift helicopter, one of which adorns each side of the locomotive’s body. - DCC Ready 21-Pin Socket - OO Scale

Hornby Dublo: BR (Early) Princess Coronation Duchess of Buccleuch 46230

Dublo: BR (Early) Princess Coronation Duchess of Buccleuch 46230   Also known as the ‘Duchess’ Class, Stanier’s ‘Princess Coronations’ were among the biggest and most powerful express passenger locomotives in Britain.  Thirty-five were built at Crewe Works between 1937 and 1948, many having streamlined casing. Ten were set aside for hauling the prestigious ‘Coronation Scot’ between London Euston and Glasgow. No. 46230 wasn’t one of those, but it was the first of the third batch of locomotives, which consisted of five non-streamlined versions, and went new to Camden in June 1938 as LMS No. 6230.  At Nationalisation in 1948, the locomotive became BR No. 46230 and was painted in lined Brunswick green as depicted by the model. At the time, the locomotive was based at Polmadie shed in Glasgow, from where it was withdrawn in December 1963. - Diecast Body - DCC Ready 21 Pin Socket - OO scale

Hornby LNER, Class J52, 0-6-0ST 4225 - Era 3

LNER, Class J52, 0-6-0ST 4225 - Era 3 Includes: - Body and cab detailing - LNER plain black livery - Gill Sans Gold and red/black shadowed lettering/numbers - Sprung buffers - Accessory bag - NEM couplings and pockets - 5 pole skewed wound motor - 21 PIN DCC Ready socket NOTE: this model is compatible with the Hornby HM7000 TXS Decoders. This requires the Hornby HM7000 App or suitable DCC controller - Will traverse 2nd radius curves minimum (R606 /R607) - OO Scale

Hornby BR (Early), Class J52, 0-6-0ST 68873 - Era 4

BR (Early), Class J52, 0-6-0ST 68873 - Era 4 Includes: - Body and cab detailing - British Railways plain black livery - Sprung buffers - Accessory bag - NEM couplings and pockets - 5 pole skewed wound motor - 21 PIN DCC Ready socket NOTE: this model is compatible with the Hornby HM7000 TXS Decoders. This requires the Hornby HM7000 App or suitable DCC controller - Will traverse 2nd radius curves minimum (R606 /R607) - OO Scale

Hornby Dublo: BR, English Electric DP1, Co-Co, DP1 'Deltic'

Hornby Dublo: BR, English Electric DP1, Co-Co, DP1 'Deltic'  Includes: - Detailed diecast body - BR Prototype Blue and Cream livery - Cab interior detailing - Distinctive Nose chevrons and Headlight - Sprung buffers - 5 Pole Motor - NEM couplings and pockets - 21 PIN DCC Socket NOTE: This is compatible with the HM7000TXS decoder. This will require the Hornby HM7000 App or suitable Digital Controller to operate - Era 4 - Will traverse minimum of 2nd radius curves (R606, R607)  - OO Scale

EFE Rail SR Bulleid Booster 20001 BR Green

SR Bulleid Booster 20001 BR Green Features: Pristine BR Green livery Running No. 20001 Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 235mm (over couplings) Five pole, skew wound, twin shaft motor with two flywheels providing drive to both bogies All axle drive Electrical pickup from all wheels Separate metal bearings fitted to each axle Diecast metal chassis block Gearing arranged for prototypical running speeds and haulage capabilities 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic ‘Bulleid’ profile and detailing Bogie-mounted coupling pockets to NEM362 standards at each end Designed to operate on curves of second radius (438mm) or greater Metal Pantograph, sprung for posing in the up or down position Bogies constructed from multiple components featuring full relief detail Separately applied detail parts, including lamp irons, handrails, roof vents and whistles Sprung buffers Cab interior detailing including seats, power handle, brake wheel and dials Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory parts Speaker installed in all models for optimum sound reproduction DETAIL VARIATIONS SPECIFIC TO THIS MODEL: Standard Cab Windows Vertical Handrail alongside the Left Hand Cab Window Two Windscreen Wipers Twin Whistles Route Indicator Discs Single-tread Steps between Bogies Original Axle Boxes Two Sandboxes per Bogie Square Shoe Beam Flash Guards Standpipe Vacuum Pipes Conceived in the late-1930s to take advantage of the Southern’s expansive electrified network, two of these Co-Co locomotives were built, gaining the nickname the ‘Boosters’ due to their motor-generator-flywheel drive arrangement employed to overcome ‘gapping’, when the locomotive could momentarily loose its electrical supply when travelling over gaps in the conductor rail. Produced especially for the EFE Rail range, this all-new model features a wealth of detail with a varied tooling suite allowing the first two locomotives, CC1 and CC2, to be modelled accurately at various points in their careers. Driven by a 5 pole, skew wound motor with flywheel, each of the six axles are driven whilst all twelve wheels provide electrical pickup. Directional lighting will operate in the forwards direction (the real locomotives were not fitted with tail lights), whilst cab lighting can be operated using a magnetic wand when used on analogue control, or when a 21 Pin DCC decoder is fitted, via two DCC functions. A speaker is pre-fitted to every model, allowing a sound decoder to be fitted to bring another dimension to your model in an instant. - Era 5 - OO Scale

Accurascale Class 37 37429 'Eisteddfod Genedlaethol' BR Large Logo

Class 37 37429 'Eisteddfod Genedlaethol' BR Large Logo Representing the original Cardiff Canton batch of six Class 37/4 conversions is No. 37429, ‘refurbished’ by Crewe Works from No. 37300 (originally D6600) in March 1986. Nos. 37426-37431 were originally planned to join the rest of the sub class on the Scottish Region. However, before they were completed the London Midland identified a more pressing need for this batch, although they were allocated to Canton in South Wales due to this depot’s extensive knowledge of the English Electric Type 3s. The introduction of Electric Train Heat (ETH) fitted locomotives to the restricted weight Cambrian route from Wolverhampton to the Welsh coast allowed InterCity to supplement its tired Mk.1 fleet on London Euston to Aberystwyth and Pwllheli services with air-conditioned Mk.2 coaches, although Mk.1s – often Network SouthEast liveried sets – were still regulars on the summer-dated trains into the 1990s. Unlike their cousins north of the border, the Welsh ‘37/4s’ were primarily passenger machines and they also found themselves allocated to Liverpool Lime St/Manchester Piccadilly/North Wales-Cardiff and Cardiff-Bristol-Weymouth diagrams. Outshopped in large logo livery, it soon gained a small red Welsh dragon logo on the driver’s cabsides, and later acquired the Sir Dyfed / County of Dyfed nameplates from No. 37180 in April 1987. However, they were removed after just four months and the locomotive was renamed Eisteddfod Genedlaethol – after the famous festival – in the August. In January 1991 it was released from Glasgow St Rollox Works in Railfreight Construction colours, and notably retained its red-backed nameplates like the other three ‘37/4s’ to gain these particular squadron decals. It kept its name on its Regional Railways repaint in May 1993 and was stored in 2001. It was disposed of at EMR Kingsbury in February 2008. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37414 Triple Grey Construction Sector

Class 37 37414 Triple Grey Construction Sector The introduction of Class 156 ‘Super Sprinters’ on the West Highland from January 1989 and on the Far North/Kyle lines in the May triggered an exodus of Class 37/4s to freight work. By the end of that year, Laira, Motherwell and Tinsley had gained allocations, while Immingham and Thornaby both acquired three locos each in the middle of 1990, by which point half the sub class were south of the border. One of these was No. 37414, which was on china clay duties in Cornwall until transferred to the North Lincolnshire depot’s FABI pool that September. This loco, which retained its Western Region-style lamp irons at the No.2 end only, had been repainted in the Roundel triple grey scheme with Distribution decals in August 1989, but quickly swapped these for more appropriate Construction brandings after its move. This saw it mostly outbased at Buxton in the Peak District to haul aggregates, cement and the iconic ICI limestone trains.While it wasn’t completely allergic to passenger work during this period, it moved to Crewe Diesel in November 1992 to join the RCMC Regional Railways North West pool, initially to work Liverpool Lime St/Crewe-Cardiff trains, still wearing its classic Railfreight image. In March 1993 it became the first member of the fleet to receive the new Regional Railways livery along with the name Cathays C&W Works 1846-1993, becoming a stalwart of the North Wales coast and the famed ‘club’ trains from Liverpool and Manchester Victoria. It soldiered on until it was stored by EWS in March 2000 and was scrapped at TJ Thomson’s of Stockton exactly nine years later. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37421 Colas

Class 37 37421 Colas Stored by EWS at Motherwell in March 2005 and sold for preservation at the Pontypool & Blaenavon Railway in 2009, No. 37421 was one of four Class 37s that was purchased by Colas Rail in 2013 for a return to the main line, along with Nos. 37116, 37175 and 37219. While the latter pair debuted for their new owner in the middle of 2014, it would be another year before No. 37421 would re-enter traffic along with BR green-liveried former Harry Needle Class 37/0 No. 37057/D6757, just in time to assist on the newly acquired Network Rail infrastructure monitoring contract. For the next four years, the Colas Class 37/4 was a solid performer on various test formations, until called to South Wales in May 2019 to provide power for Cardiff-Rhymney line commuter turns along with hired-in Nos. 37025 and 37418. This followed a fallow few months when the locomotive was under repair and eventually returned after a bogie swap with No. 37175. The Rhymney workings ended in March 2020 and it was back to test train work, mixed in with NR saloon duties with No. 975025 Caroline and the odd infrastructure duty. Cosmetically, towards the end of that same year it swapped its Colas ‘hard hat’ logos for new diamond stickers, although it has stubbornly retained its unique arrangement of single lamp irons on different sides of the locomotive at each end. Despite the increasing number of Colas HST power cars on the NR services, No. 37421 is still a regular atop PLPR (Plain Line Pattern Recognition) and UTU (Ultrasonic Testing Unit) formations and is expected to remain a key component of the operator’s fleet for several years to come. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 37 37408 'Loch Rannoch' EWS

Class 37 37408 'Loch Rannoch' EWS Arguably the most popular of the Class 37/4s in the British Rail and early privatisation era, No. 37408 Loch Rannoch clinged obstinately to its large logo paint scheme – the last so adorned – until being called to Toton in mid-1998 for a repaint. Following a protracted overhaul, which included a new toughened centre window, it debuted in the revised maroon and gold of its owner EWS, sans-nameplates, in November and wasn’t reunited with its famous name until the following February. Over the next seven years, the former No. 37289 (built as D6989) was a regular performer on loco-hauled services around the country, particularly Birmingham/Crewe-Bangor/Holyhead, Cardiff-Fishguard/Rhymney and Crewe/Manchester, Leeds-Carlisle/Knaresborough and even in Scotland on the Fort William sleeper. It could also be found on a wide variety of freight and even Railtrack/Network Rail test trains and was variously allocated to Crewe Diesel, Motherwell, Cardiff Canton, Toton and Margam during this period.Outshopped in the same livery in March 2002, its rock star status meant that it was never long before it gained various accoutrements, including regular bouts of Eastfield ‘Westies’, silver buffers, white lamp irons, black headcode panels and even Immingham 40B shedplates. It seemed inevitable that Rannoch would return to large logo in due course and would have been a favourite for preservation, but after running away and colliding with its stabled rake of coaches at Rhymney on 1 August 2005 the locomotive was stored and repairs were not authorised. It was eventually scrapped at EMR Kingsbury in January 2008. Features: Highly detailed OO scale model, 1:76.2 Heavy die-cast metal chassis Accurate tumbleholme, nose, cab roof and cantrail curves taken from 3D Laser scan and extensive surveys Timeframe specific details, including but not limited to; Bogies (Fabricated and three variations of Cast) Fuel tanks (As built and with later smooth-sided long range fuel tank) Early Class 37/0 features frost grille, boiler filler panel and access steps Early Class 37/0 features illuminated split headcode displays with a selection of different four-character headcodes Class 37/6 have operational WIPAC light clusters and top headlight and numerous different nose slides all including multiple working socket Three styles of buffer: large round Oleo, oval and squared oval Three styles of nose grilles: as built, refurbished ‘split’ and refurbished ‘single piece’ Boiler exhaust, and two styles of plated boiler panel With or without bufferbeam skirts With or without cab roof vents and bodyside windows Nose and roof aerials and antennas (where applicable) Three styles of windscreen: standard, centre toughened and all toughened Three styles of cab interior: as built, refurbished and modern DRS locos Four bufferbeam variations with different piping configurations Door kickplates where applicable Multiple body and nose slides to accurately represent almost every member of the class, including three variations of cantrail grille: early EE (for D6700-D6704), later EE and RSH Four roof styles: Original double riveted, single riveted, welded and welded with antennas Separately applied etched metal and high fidelity plastic detail parts, including grab handles, aerials, steps, wipers, nameplates, crests and more. Etched metal door kickplates (where applicable), ‘frost’ grille (where applicable) & super fine etched metal roof grille Scale width wire handrails Turned brass roof-mounted horns on centre headcode examples Full underbody tank detail with brackets and pipework Bogies feature separate footsteps, etched footsteps, brake cylinders, speed recorder, end brake rigging and very fine brake chain Brake blocks on trucks (bogies) in line with wheels (can be moved for EM/P4 gauges) Numerous other locomotive-specific details yet to be revealed! RP25-110 profile OO gauge wheels with fine scale ‘drop in’ EM (18.2mm gauge) and P4 (18.83mm gauge) wheels available separately Accurate high-fidelity miniature snowploughs Fully sprung metal buffers, extra-fine factory-installed pipework and screw couplings Correct height mini-tension-lock couplers with NEM socket as well as a fully detailed bufferbeam Every model includes PowerPack / Backup Power Capacitor Bank for up to ten seconds of power free running, flicker free lighting and continuous sound High Performance traction, to include; High-quality five-pole motor with two flywheels Metal Helical Gear box for maximum performance and slow speed running Gearing arranged so locomotive can achieve a scale top speed of 100 mph (160 km/h) DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running All wheel drive and all wheel pickup All models include our motorised roof fan with dedicated silky smooth coreless functionality on both DC and DCC. Provided DCC ready [21Pin MTX Socket] or Factory DCC Sound Fitted [ESU LokSound 5] Directional lighting on DC and DCC Fully functional Headlights per prototype Engine Bay Lighting (with visible Prime Mover) WIPAC light clusters where appropriate with day and night-time settings Separately switched cab lighting and illuminated, details driver’s console, auto off on movement Switchable red tail lights DCC Sound Versions include: ESU LokSound V5 DCC Chip Customised Dual-Speaker Technology with; Large Accurathrash Bass Speaker Smaller 'iphone' style cube for higher frequencies DCC ready with PowerPack Super-capacitor for uninterrupted power and super low speed running - OO Scale

Accurascale Class 66 66302 Fastline

Class 66 66302 Fastline 66302 arrived in the uk as part of a “mixed delivery” of class 66 low emission models, alongside locos for Freightliner and DRS aboard the MV Stellanova on the 8th November 2006. Following unloading and acceptance it worked its first train of HYA’s on the 13th November. When Jarvis went in to administration, Fastline’s small fleet of class 66 locomotives were acquired by DRS before being repainted into their house colours Features: Highly detailed OO scale model, 1:76.2 scale Minimum Radius 438mm (2nd Radius Set-track) Die-cast metal chassis. RP25-110 profile OO wheels Separately applied etched metal/plastic detail parts, including grab handles, steps, wipers, etc. Scale width wire handrails Full underframe tank detail with brackets and pipework Fully sprung buffers, factory-fitted pipework and screw couplings (for display) Dummy knuckle couplers fitted where relevant Kinetic NEM coupler mounts at correct height and mini-tension-lock couplers “Easi-mag” lift off roof panel to access the decoder and DC light switches PowerPack capacitor for uninterrupted power Customised Dual-Speaker Technology with large ‘Accurathrash’ Style Bass Speaker and smaller 'iphone' style cube for higher frequencies (on DCC Sound-fitted models only) Hall sensor for flange squeal effect (on DCC Sound-fitted models only) DCC ready with PowerPack capacitor for uninterrupted power DCC ready [21-Pin MTX Socket] or factory-fitted with Original ESU LokSound 5 Decoder options Five-Pole motor with two flywheels Gearing arranged so locomotive can achieve minimum scale top speed of 75 mph (120kph) All wheel drive and all wheel pickup Directional lighting, DC and DCC Switchable Red and white marker lights with day/night options Separately switched cab lighting, auto/off on movement - OO Scale

Hornby LNER, W1 Class, 'Hush Hush' Streamlined, 4-6-4, 10000 - Era 4

LNER, W1 Class, 'Hush Hush' Streamlined, 4-6-4, 10000 - Era 4 Includes: - LNER abbreviation for wartime, N.E branding in Gill Sans Font with shading - Wartime Black Livery - Accessory bag (drain cocks, pipes) - 2x extra trailing wheels for the Cartazzi truck (if your layout has sufficient curvature) - Accurate cab detail - Double Kylchap double blast-pipe arrangement - Streamlined Corridor tender - 21 Pin DCC Decoder Socket - Era 4 - OO scale

Rapido UK HR ‘Jones Goods’ 4-6-0 – LMS Unlined Black (Early)

HR ‘Jones Goods’ 4-6-0 – LMS Unlined Black (Early) Includes: - Highland Railway ‘Jones Goods’ LMS unlined black (early) - Riveted smokebox - No smokebox wing plates - Caledonian style chimney and smokebox door - Short tender tank -no toolbox - Ross ‘pop’ safety valves - Tablet catcher - 21-pin decoder socket - Spring buffers - Museum quality paint finish - Factory-fitted sound speaker - Smooth & powerful mechanism - Highly detailed - NEM coupler pockets - OO Scale

Rapido UK HR ‘Jones Goods’ 4-6-0 No.17917 LMS Unlined Black (Late)

Rapido - HR ‘Jones Goods’ 4-6-0 – BR Lined Black No.57925 - OO Scale Includes: - LMS unlined black (Late) - Riveted smokebox - No smokebox wing plates - Caledonian style chimney and smokebox door - Short tender tank -no toolbox - Ross ‘pop’ safety valves - Tablet catcher - 21-pin decoder socket - Spring buffers - Museum quality paint finish - Factory-fitted sound speaker - Smooth & powerful mechanism - Highly detailed - NEM coupler pockets - OO Scale

Bachmann Class 45 SC H/C D49 'The Manchester Regiment' BR Green (SYP)

Class 45 Split Centre H/C D49 'The Manchester Regiment' BR Green (SYP) The Bachmann Branchline model combines a finely-proportioned bodyshell with extensive detailing throughout, including separately fitted cab handrails, windscreen wipers, lamp brackets and sandpipes. With a powerful 5-pole motor fitted with twin flywheels which drives both bogies, these models have plenty of pulling power to haul even the longest trains. With a 21 Pin DCC decoder interface, it’s easy to add a decoder or sound decoder and speaker for use on DCC Features: Pristine BR Green (Small Yellow Panels) livery Running No. D49 Named ‘The Manchester Regiment’ Etched Nameplates included Split Centre Headcode Panels displaying headcodes 1C58 and 1N78 NEM Coupling Pockets Sprung Buffers Powerful 5 Pole Motor with Twin Flywheels Detailed Cab Interior with pre-fitted Driver in one cab Directional Lighting Locomotive Ready to Accept a Speaker Accessory Pack Equipped with a 21 Pin DCC Decoder Socket – recommended Decoder item No. 36-557A Length 275mm - Era 5 - OO Scale

Hornby BR, W1 Class 'Hush Hush' Streamlined, 4-6-4, 60700 - Era 4

BR, W1 Class 'Hush Hush' Streamlined, 4-6-4, 60700 Includes: - British Railways branding in Gill Sans Font - Garter Blue livery - Accessory bag (drain cocks, pipes) - 2x extra trailing wheels for the Cartazzi truck (if your layout has sufficient curvature) - Accurate cab detail - Double Kylchap double blast-pipe arrangement - Streamlined Non corridor tender type - 21 Pin DCC Decoder Socket - Era 5 - OO scale Locomotive information and history: Having completed nearly 90,000 miles of test running since new, Sir Nigel Gresley's W1 4-6-4 No. 10000 entered Darlington Works on 21 August 1935 for what was anticipated to be a major overhaul and modification. During this period Gresley decided that it was time to rebuild 10000 as a three cylinder locomotive with a conventional firetube boiler. Subsequently, 10000 was moved to the Doncaster Works on 13 October 1936 and this is where the first drawing for the modification were being prepared. When 10000 was finally released from Doncaster Works in November 1937, it was a significantly different locomotive, being fitted with a diagram 111 boiler that was very similar to the diagram 108 boiler fitted to No. 2006 'Wolf of Badenoch', and with a streamlined casing to the same pattern as the A4 class. As many components as possible from the original W1 were used in the rebuild, including the frames, which were shortened by 1 ½ feet at the front end. Other items, where needed, were sourced from the A4 class, the A3 class or, like the front bogie, from the B17 and an experimental double Kylchap blastpipe and chimney was fitted. The locomotive was turned out in Garter Blue as per some of the A4's (in 1937 this became a standard livery). The cab, while similar to that of the A4 class, 60700 was considerably longer and this led to the locomotive's tender's coal delivery chute having to be lengthened to compensate for the extra distance from the firebox doors. The original tender was retained, but with superficial modifications, such as to the curvature of the front plates and the addition of streamlined plating to the front and rear, although this was partially removed just a year later in 1938. Up to the outbreak of war in 1939 and during the war years, 10000 worked mainly on Kings Cross main line duties and with its power and smooth riding it was a popular engine with the LNER's drivers, though less so with the firemen due to the distance between the shovelling plate and the firehole door. The locomotive also became more 'fitter' friendly after April 1942 when the skirting was removed from ahead and behind the outside cylinders to improve access in wartime conditions. At this time the 10000 was painted in wartime Black livery and with only 'N E' on the tender sides. By 1946 and now repainted in Garter blue livery, the corridor tender was swapped for the streamlined non-corridor tender from 4462 (BR 60004) William Whitelaw and the locomotive was engaged in more varied duties, working occasional passenger services to Leeds and Cambridge from Kings Cross alongside the occasional 'lodging' turns to Newcastle. By 1948 under the new British Railways, the locomotive received the number 60700 and "British Railways" insignia on the tender in Gills Sans font. Following allocation to Doncaster on 25 October 1953, 60700 became a more frequent visitor to Leeds and also worked turns to Sheffield, as well as hauling Doncaster to Peterborough passenger services and various braked goods trains. In a similar circumstance to 10000 never receiving its proposed name of 'British Enterprise' in November 1929, 60700 never received its intended name of 'Pegasus', for which the nameplates were cast on 13 April 1951. At this time the locomotive lost its Garter Blue livery for the new "Express Passenger Blue" with white and black lining. After an interesting and slightly troubled life, the locomotive was scrapped at its Darlington birthplace in 1959. Interesting to note is that as 60700 was going into works for scrapping, the original marine boiler the locomotive was fitted with, had been perched on bricks as steam raising boiler outside the works and outlasted the locomotive by a few years.

Hornby BR, Class 9F, 2-10-0, 92002 - Era 4

BR, Class 9F, 2-10-0, 92002 Includes: - BR Black livery - Pipework represented in copper or heat lagging - Detailed cab interior - Accessory bag includes steam cocks - Removable coal load - 21 Pin DCC Decoder Socket - Era 4 - OO scale Locomotive information: The British Railways Standard 9F Class was a 2-10-0 steam locomotive, the last of the standardised BR designs. The Robert Riddles design was intended as a long distance heavy express freight locomotive. In total 251 of the class were produced between January 1954 and March 1960, with the final locomotive No. 92220 'Evening Star' being the last steam locomotive built by British Railways. The huge length of the 10 coupled driving wheels proved problematic when faced with tight curves, a situation that freight haulage would make inevitable. A solution was found by removing the flanges from the centre driving wheel and reducing the size on the flanges on the second and fourth driving axle's wheels.  Riddles had chosen the 2-10-0 wheel configuration in-order to spread the load of the boiler over a greater area. This meant that the boiler had to be raised considerably compared to other designs to allow the firebox to sit above the trailing driving wheels. As a result, the 9F features a distinctive void between the suspended boiler and the footplate. In operation the class proved extremely versatile. Not only did the 9F excel as a freight locomotive, but when required it also succeeded as a passenger locomotive. Reports even suggest that when 92220 'Evening Star' was used to pull the Red Dragon express service between Cardiff and London it was forced to delay its arrival to allow the restaurant services to be completed, having outperformed the normal Britannia Class locomotives used on the service.  This was not the only time 9Fs had been recorded outperforming dedicated express locomotives and on such services the locomotives were capable of running at over 90mph. This combination of high speed, fast acceleration and powerful hauling capabilities mean that many consider the class to be pinnacle of British steam locomotive design. Locomotive numbers 92165-92167 were built with a mechanical stoker. This system used a helical screw to move coal from the tender straight into the firebox. This meant that coal could be burnt a faster rate than a fireman could maintain otherwise.  Systems like this proved extremely useful on long distance American railways however in Britain it was rare for a locomotive to require such as high rate of coal delivery over a long period of time meaning that a good fireman could prove just as effective. Locomotive 92002 was the third such locomotive to be constructed by BR, being built at Crewe in 1954. The locomotive was outshopped with the BR1G tender and in the usual BR black colour scheme. The locomotive would go on to be one of the 106 locomotives withdrawn in 1967, the locomotive would not be preserved.