Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem)

GCR 9J (J11) 64305 BR Black (Early Emblem) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted)

GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J 295 GCR Lined Black (Sound Fitted)

GCR 9J 295 GCR Lined Black (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The 9Js carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme with its ornate three-colour lining is reproduced to exquisite effect, with a rich and consistent finish throughout. The Great Central lettering and company crest on the tender is the icing on the cake, comprising no fewer than six separate colours and replicated using precision printing techniques for full authenticity. The Branchline 9J runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine Great Central Railway Lined Black livery Running No. 295 Smooth Smokebox Door with original Handwheel Top Front Lamp Iron mounted above the Smokebox Door Robinson Tapered Chimney Draught Retarder Original Tall Dome Ramsbottom Safety Valves Parallel Buffer Shanks with End Collars Central Rib on Cab Roof Tender fitted with Water Pick-Up Gear Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann MR 1532 (1P) Tank 58040 BR Lined Black (BR) - DCC Sound Fitted

MR 1532 (1P) Tank 58040 BR Lined Black (British Railways) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black ‘British Railways’ Livery Running No. 58040 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 58051 BR Lined Black (E/E) - DCC Sound Fitted

MR 1532 (1P) Tank 58051 BR Lined Black (Early Emblem) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black Early Emblem Livery Running No. 58051 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 58056 BR Lined Black (E/E) - DCC Sound Fitted

MR 1532 (1P) Tank 58056 BR Lined Black (Early Emblem) - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine BR Lined Black Early Emblem Livery Running No. 58056 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 3-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with BR Style Numberplate Low Smokebox Door Handrail Push-Pull Fitted Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. Although the first examples were built in 1881, almost seventy years later British Railways inherited many of these Victorian machines following Nationalisation and set them to work on the branch lines and local services with which they were already very familiar. Reproduced as this marvel in miniature, the Branchline model comes packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 4 - OO Scale

Bachmann MR 1532 (1P) Tank 1295 LMS Black - DCC Sound Fitted

MR 1532 (1P) Tank 1295 LMS Black - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine LMS Black Livery Running No. 1295 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 4-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with MR/LMS Style Numberplate Low Smokebox Door Handrail Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. The LMS embarked on a programme to replace the 1P’s original round-top boilers with Belpaire boilers and No. 1370 is one such locomotive to have undergone this treatment. A miniature marvel, the Branchline model is packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 3 - OO Scale

Bachmann MR 1532 (1P) Tank 1370 LMS Black - DCC Sound Fitted

MR 1532 (1P) Tank 1370 LMS Black - DCC Sound Fitted Features: Equipped with a Next18 DCC Decoder Socket – Recommend Decoder item No. 36-567A Length 142mm (over couplings) Coreless motor Electrical pickup from all wheels Separate metal bearings fitted to each driving axle Diecast metal chassis block Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities Pivoting and sprung rear pony truck Optional wheelset supplied in the accessory pack with traction tyres fitted, to provide increased haulage capacity where required 5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Detachable coupling pockets to NEM362 standards fitted at each end Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate with integral side tank weights Precision moulded plastic boiler, side tanks and cab Separately applied details including lamp irons, push-pull gear*, condensing apparatus*, handrails, whistle, vacuum pipes and turned brass safety valves* (*where applicable) Highly detailed and decorated cab interior including separately fitted regulator, reverser, handbrake and valve wheels Running gear detailing includes springs, brakes and separately fitted brake gear, sandboxes and sandpipes Glazed cab spectacles Sprung metal buffers Each model supplied with an accessory pack including cab doors, additional bufferbeam pipework, cab steps and screwlink couplings Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC) Speaker installed in all models for optimum sound reproduction ESU Loksound Micro V5DCC Sound Decoder fitted to SOUND FITTED versions Sound files produced specifically for the Bachmann Branchline Midland Class 1532 (1P) using recordings from real locomotives Details Specific To This Model: Pristine LMS Black Livery Running No. 1370 Belpaire Boiler Standard Side Tanks Welded Side Tanks and Bunker High Cab Front Windows Straight-Sided Bunker with 4-Bar Coal Rails Standard Lamp Irons Deeley 3’ Chimney Rivetted Smokebox Smokebox Door with MR/LMS Style Numberplate Low Smokebox Door Handrail Large Vacuum Exhauster Sandboxes Fitted Between Driving Wheels Running Plate Steps   The Midland Railway Class 1532, alongside a number of similar 0-4-4T designs, formed the backbone of Midland Railway local and light passenger duties for decades, and now the OO scale model of this ornate prototype returns to the Bachmann Branchline range. The LMS embarked on a programme to replace the 1P’s original round-top boilers with Belpaire boilers and No. 1370 is one such locomotive to have undergone this treatment. A miniature marvel, the Branchline model is packed with an impressive level of detail wherever you look. A significant proportion of the 1P is made from diecast metal, with fine engraving and detailing, which is complemented by precision moulded components capturing every aspect of the prototype in high fidelity. Sprung buffers are fitted to each bufferbeam, whilst in the cab, the locomotive controls are faithfully captured and decorated authentically. - Era 3 - OO Scale