Bachmann MR 3835 (4F) w/ Fowler Tender 43892 BR Black (SF)

MR 3835 (4F) w/ Fowler Tender 43892 BR Black (Sound Fitted) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black ‘British Railways’ livery Running No. 43892 Fowler Tender with Water Pickup Gear Short Chimney Ross Pop Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack SOUND FITTED – Fitted with a ESU Loksound V5DCC 21 Pin DCC Sound Decoder Length 221mm (over couplings) OO Scale 

Bachmann MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black (SF)

MR 3835 (4F) w/ Johnson-Deeley Tender 3850 LMS Black (Sound Fitted) The 4Fs were simple yet beautiful machines and the Branchline model pays homage to that with high fidelity mouldings for the main components like the smokebox, boiler, firebox and cab, which are all mounted on a diecast metal running plate. Countless separate detailing parts are then added like the metal handrails, turned brass safety valves, lamp irons and lubricators. Sprung metal buffers are fitted to both bufferbeams. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. This attention to detail extends to the tender, while the tender drawbar is adjustable to suit individual layout conditions and electrical connections are incorporated into the drawbar. Look inside the cab and you will find a sublime level of detail; the boiler backhead boasts an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. A poseable fallplate is fitted to the rear of the cab to complete the look. The Branchline 4F runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine LMS Black livery Running No. 3850 Johnson-Deeley Tender Tall Chimney with Capuchon Ramsbottom Safety Valves Fluted Connecting Rods Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack SOUND FITTED – Fitted with a ESU Loksound V5DCC 21 Pin DCC Sound Decoder Length 221mm (over couplings) OO Scale 

Bachmann GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted)

GCR 9J (J11) 64305 BR Black (Early Emblem) (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Upon becoming part of the LNER in 1924 the 9Js were reclassified as J11s and this designation stayed remained into British Railways life and until withdrawal. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The J11s carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme is replicated with the usual care and attention that you expect from Bachmann Branchline, resulting in a paint finish that is rich and consistent throughout. Details like the running number, plates and plaques are then added using precision printing techniques for full authenticity. The Branchline J11 runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine BR Black Early Emblem livery Running No. 64305 Riveted Smokebox Door with Twin Handwheels, Numberplate and Lamp Iron mounted on the Smokebox Door LNER ‘Plantpot’ Chimney Snifter Valve LNER lowered Dome Ross Pop Safety Valves Parallel Buffer Shanks with End Collars Wakefield Lubricator (fitted to the left hand side) Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann GCR 9J 295 GCR Lined Black (Sound Fitted)

GCR 9J 295 GCR Lined Black (Sound Fitted) The Great Central Railway was a big mover of goods and amongst the locomotives it built for this purpose were the 9J 0-6-0s. Nicknamed ‘Pom Poms’ because their exhaust noise sounded very similar to the guns of the same name, these freight workhorses are replicated in OO scale by Bachmann Branchline. The 9Js carried all the hallmarks of a locomotive designed by the GCR’s Chief Mechanical Engineer John G. Robinson and these features are replicated on the Branchline model using a precision moulded boiler, smokebox and firebox mounted on a diecast metal running plate. The distinctive Robinson cab is another high-fidelity moulding, within which boiler backhead is replicated using an array of separately fitted pipework, controls and dials, all of which are enhanced further with bespoke decoration. The GCR tender has a distinctive look too with its high capacity and flared top edges, and again these trademark features are captured in miniature using high-fidelity mouldings. Coupling to the locomotive via a drawbar that is adjustable to suit individual layout conditions, electrical connections are integrated into it and a hinged fallplate is also fitted to the tender. Across the model separate components are added, from the metal handrails and sprung metal buffers, to the lamp irons at the front and rear, to complete the look of this freight machine. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes, whilst between the frames a representation of the inside motion is present. The black colour scheme with its ornate three-colour lining is reproduced to exquisite effect, with a rich and consistent finish throughout. The Great Central lettering and company crest on the tender is the icing on the cake, comprising no fewer than six separate colours and replicated using precision printing techniques for full authenticity. The Branchline 9J runs as well as it looks thanks to a power full three pole motor and diecast metal gearbox. The locomotive driving wheels run in separate metal bearings and all six driving wheels are equipped with electrical pickups, tender pickups are included too. The tender houses a 21 Pin decoder socket and pre-fitted speaker, making it easy to upgrade this model to DCC or DCC sound. Details: Pristine Great Central Railway Lined Black livery Running No. 295 Smooth Smokebox Door with original Handwheel Top Front Lamp Iron mounted above the Smokebox Door Robinson Tapered Chimney Draught Retarder Original Tall Dome Ramsbottom Safety Valves Parallel Buffer Shanks with End Collars Central Rib on Cab Roof Tender fitted with Water Pick-Up Gear Features: Powerful 3 Pole Motor Tender Pick-ups Adjustable Tender Drawbar NEM Coupling Pockets Sprung Buffers Accessory Pack Locomotive Ready to Accept a Speaker Equipped with a 21 Pin DCC Decoder Socket – Recommend Decoder item No. 36-557A Length 220mm (over couplings) - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted)

LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted Deluxe)

LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted)

LMS 8F with Riveted Tender 8233 LMS Black (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine LMS Black Livery Running No. 8233 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (SF)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (SFD)

LMS 8F with Welded Tender 48305 BR Black (Early Emblem) (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Locomotive is now Preserved Pristine BR Black (Early Emblem) Livery Running No. 48305 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest) (SF)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Welded Tender 48703 BR Black (Late Crest) (SFD)

LMS 8F with Welded Tender 48703 BR Black (Late Crest) (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine BR Black (Late Crest) Livery Running No. 48703 Welded Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights AWS Equipment Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (SF)

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (Sound Fitted) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (SFD)

LMS 8F with Riveted Tender 48339 BR Black (Late Crest) [W] (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Weathered BR Black (Late Crest) Livery Running No. 48339 Riveted Stanier 4,000-gallon Tender Smokebox Door with Large Numberplate High Front Lamp Iron (Top) Straight Reverser Rod Steam Lance Valve Mounted Low on the Smokebox and with External Pipework Raised Bufferbeam Rivets Cast Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted Deluxe)

LMS 8F with Riveted Tender 8036 LMS Black (Sound Fitted Deluxe) The Stanier 8F is an all-time icon of British locomotive design, few other classes were as numerous as the 8Fs and they played a vital role in the allied victory during World War Two, yet surprisingly OO Scale models of this unsung hero have never been produced by Bachmann Branchline, until now. Details on this model: Pristine LMS Black Livery Running No. 8036 Riveted Stanier 4,000-gallon Tender Smokebox Door with Small Numberplate High Front Lamp Iron (Top) Curved Reverser Rod Steam Lance Valve Mounted High on the Smokebox Countersunk Bufferbeam Rivets Fabricated Wheel Balance Weights Features: Equipped with a Plux22 DCC Decoder Socket – recommended Decoder item No. 36-570B Length 260mm (over couplings) Coreless motor mounted in the locomotive, driving the third set of driving wheels Electrical pickup from all driving wheels along with tender pickups Separate metal bearings fitted to each driving axle Diecast metal chassis block (locomotive) Diecast metal gearbox, with gearing arranged for prototypical running speeds and haulage capabilities 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing Valve gear of metal construction Adjustable tender drawbar with integral loco-tender wiring Sprung front pony truck with integral coupling pocket to NEM362 standards Detachable coupling pocket to NEM362 standards fitted to the tender Auto-Release Couplings fitted to the tender – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only) Designed to operate on curves of second radius (438mm) or greater Diecast metal running plate and boiler Precision moulded cab, tender tank and tender chassis Separately applied details including smokebox door, smokebox saddle, front frame extensions, steam pipes, lubricators, reverser and sandboxes Individual metal detail components including handrails, handrail knobs, boiler feeds, lamp irons, safety valves, sandpipes and tender vents Highly detailed and decorated cab interior including controls, dials, gauges and tool cabinets with separately fitted valve wheels, regulator, reverser and crew seats Hinged and posable metal fall plate between the locomotive and tender Tender fitted with coal-effect load Running gear detailing includes brakes and separately fitted brake gear on the locomotive and tender Glazed cab windows Sprung metal buffers Each model supplied with an accessory pack including cab doors, screwlink couplings, front steps and cylinder draincocks Firebox Glow (on analogue) / Firebox Glow & Flicker (on DCC or when SOUND FITTED & SOUND FITTED DELUXE models are used on analogue) Back-Up Stay Alive System providing uninterrupted power to prevent stalling, light flicker and sound cut-outs (operates on DCC only) Dual Fitted speakers, one in the locomotive and one in the tender, installed in all models for optimum sound reproduction Zimo MS450P22 DCC Sound Decoder fitted to SOUND FITTED & SOUND FITTED DELUXE versions - OO Scale

Bachmann LNWR G2 9446 LMS Black (Sound Fitted)

LNWR G2 9446 LMS Black (Sound Fitted) The London & North Western Railway (LNWR) was known as the Premier Line and one of its premier freight locomotives, in terms of power and ability at least, was the G2 Class, and their later equivalents, the G2As. The Bachmann Branchline model brings the G2 to OO Scale with a high fidelity rendition of the early-twentieth century powerhouse and comes complete with SOUND FITTED. This model of No. 9446 forms part of our new Railway Celebrations range and depicts the locomotive that took part in the 100th Anniversary celebrations of the opening of the Stockton & Darlington Railway. In 1925, to mark the centenary, a celebration of railways featuring locomotives from the past century was put on by the London & North Eastern Railway (LNER). Opened by the Duke and Duchess of York – later King Geroge VI and Queen Elizabeth – a procession of locomotives took place over some six miles of line between Stockton and Darlington, passing the royal grandstand and delighting the hundreds of thousands of onlookers who turned out to witness the celebrations. The parade of 53 locomotives intended to showcase the evolution of the steam locomotive, from the early examples to modern designs. The first London & North Western Railway (LNWR) 0-8-0 locomotives were built in 1893, however the G2 was somewhat younger, being built between 1921 and 1922 and No. 9446 was one of 60 locomotives built to this design at Crewe Works. Outshopped as LNWR No. 1012, the locomotive was the first G2 to receive London, Midland & Scottish Railway (LMS) numbering, becoming No. 9446 which was applied in June 1925, along with LMS livery with a high gloss finish in preparation for its participation in the centenary celebrations. No. 9446 would become BR No. 49446 upon Nationalisation in 1948 and the locomotive remained in traffic until April 1964 when it was withdrawn and subsequently scrapped. The Bachmann Branchline model employs a diecast running plate, along with further metal components to provide an impressive weight ensuring the model’s strength and power match its prototype’s. Meanwhile, those components produced in plastic are precision moulded, with details such as rivets and boiler bands crisply reproduced. Separate parts are then added to enhance the authenticity of the model further, from the metal handrails to the whistle and safety valves, each of which are turned brass. The smokebox door is hinged and can be posed open or closed, whilst within the cab, controls, dials and pipework are all moulded authentically and decorated accordingly. The locomotive’s diecast chassis is enhanced with brake blocks, brake rigging and sandboxes with separate wire sandpipes. Driving wheels are cast to the correct LNWR pattern, whilst the third pair of driving wheels are flangeless, as on the real locomotives. Moving to the tender and the locomotive to tender drawbar is adjustable to suit individual layout conditions, whilst electrical connections are incorporated into the drawbar and a poseable fallplate is fitted to the tender – not only is this a prototypical feature but it serves to reduce the visual impact of any gap in this area which may be necessitated by operating conditions. The tender itself is finely moulded, with several separately applied details including the lamp irons, tank vents, fire tool holder and handwheels. A realistic coal load is included whilst the tender chassis includes brake rigging and metal wheelsets are employed. Whilst there is little to complicate the black livery of this freight locomotive, the paintwork is applied to a high standard throughout, with the printed details, including the numberplate and cab dials, all reproduced and fully legible thanks to the specialist printing techniques implemented in the production of Bachmann models.  Features: Pristine LMS Black livery Running No. 9446 Smokebox Door Handwheel Adjustable Tender Drawbar Powerful 3 Pole Motor NEM Coupling Pockets Sprung Buffers Accessory Pack Speaker Fitted SOUND FITTED – Fitted with a ESU Loksound V5DCC 21 Pin DCC Sound Decoder – See below for the function list Length 231mm (over couplings) Part of our Railway Celebrations range - Era 3 - OO Scale  

Bachmann LMS Fowler 3F (Jinty) 16564 LMS Black DCC Sound fitted (OO)

LMS Fowler 3F (Jinty) 16564 LMS Black DCC Sound fitted Features: Pristine LMS Black livery Running No. 16564 Running Plate-mounted Sandbox Fillers, accessed via the Water Tank Keyholes NEM Coupling Pockets Sprung Buffers Powerful 3 Pole Motor SOUND FITTED - Fitted with a ESU LokSound Micro V5DCC Sound Decoder Length 127mm - Era 3 - OO Scale The ‘Jinty’ is a timeless classic and we are delighted to welcome this LMS workhorse back to the Bachmann Branchline OO scale range with this model of No. 16564 in LMS Black livery. Taking advantage of the technical upgrades undertaken to the popular Branchline model a few years ago, the ‘Jinty’ combines a powerful 3 pole motor with a Next18 DCC decoder socket and has space for a speaker for those wishing to add sound – or why not opt for our SOUND FITTED model which has a Speaker and DCC Sound Decoder pre-fitted. The Bachmann Branchline model combines a chassis that is sure to provide smooth and powerful running and which is detailed with brake blocks, brake rigging, sandboxes and sandpipes, with a high fidelity bodyshell that is mounted to a diecast running plate. The model is adorned with numerous separately-fitted detail parts including the handrails, lamp irons and vacuum pipes, whilst the safety valves are also separate additions and are of metal construction. Inside the cab a detailed boiler back-head can be found, decorated to the same high standard as the exterior of the model with its exquisite livery application using authentic colours, logos and fonts.  

Bachmann LMS Fowler 3F (Jinty) 47406 BR Black (Early) DCC Sound (OO)

LMS Fowler 3F (Jinty) 47406 BR Black (Early) DCC Sound  Features: Locomotive is Preserved Pristine BR Black (Early Emblem) livery Running No. 47406 Running Plate-mounted Sandbox Fillers, accessed via the Water Tank Keyholes NEM Coupling Pockets Sprung Buffers Powerful 3 Pole Motor SOUND FITTED - Fitted with a ESU LokSound Micro V5DCC Sound Decoder  Length 127mm - Era 4 - OO Scale The ‘Jinty’ is a timeless classic and we are delighted to welcome this LMS workhorse back to the Bachmann Branchline OO scale range with this model of preserved locomotive No. 47406 in BR Black with Early Emblem. Taking advantage of the technical upgrades undertaken to the popular Branchline model a few years ago, the ‘Jinty’ combines a powerful 3 pole motor with a Next18 DCC decoder socket and has space for a speaker for those wishing to add sound – or why not opt for our SOUND FITTED model which has a Speaker and DCC Sound Decoder pre-fitted. The Bachmann Branchline model combines a chassis that is sure to provide smooth and powerful running and which is detailed with brake blocks, brake rigging, sandboxes and sandpipes, with a high fidelity bodyshell that is mounted to a diecast running plate. The model is adorned with numerous separately-fitted detail parts including the handrails, lamp irons and vacuum pipes, whilst the safety valves are also separate additions and are of metal construction. Inside the cab a detailed boiler back-head can be found, decorated to the same high standard as the exterior of the model with its exquisite livery application using authentic colours, logos and fonts.